Neochloris oleoabundans cell walls have an altered composition when cultivated under different growing conditions

Cultivation modes affect the morphology, biochemical composition, and antioxidant and anti-inflammatory properties of the green microalga Neochloris oleoabundans

Microalgae are considered promising sustainable sources of natural bioactive compounds to be used in biotechnological sectors. In recent years, attention is increasingly given to the search of microalgae-derived compounds with antioxidant and anti-inflammatory properties for nutraceutical or pharmacological issues. In this context, attention is usually focused on the composition and bioactivity of algae or their extracts, while less interest is driven to their biological features, for example, those related to morphology and cultivation conditions. In addition, specific studies on the antioxidant and anti-inflammatory properties of microalgae mainly concern Chlorella or Spirulina. The present work was focused on the characterization of the Chlorophyta Neochloris oleoabundans under two combinations of cultivation modes: autotrophy and glucose-induced mixotrophy, each followed by starvation. Biomass for morphological and biochemical characterization, as well as for extract preparation, was harvested at the end of each cultivation phase. Analyses indicated a different content of the most important classes of bioactive compounds with antioxidant/anti-inflammatory properties (lipids, exo-polysaccharides, pigments, total phenolics, and proteins). In particular, the most promising condition able to prompt the production of antioxidant algal biomass with anti-inflammatory properties was the mixotrophic one. Under mixotrophy, beside an elevated algal biomass production, a strong photosynthetic metabolism with high appression of thylakoid membranes and characteristics of high photo-protection from oxidative damage was observed and linked to the overproduction of exo-polysaccharides and lipids rather than pigments. Overall, mixotrophy appears a good choice to produce natural bioactive extracts, potentially well tolerated by human metabolism and environmentally sustainable.

Neochloris oleoabundans cell wall rupture through melittin peptide: a new approach to increase lipid recovery

OBJECTIVES

Microalgae cell wall affects the recovery of lipids, representing one of the main difficulties in the development of biofuel production. This work aimed to test a new method based on melittin peptide to induce a cellular disruption in N. oleoabundans.

RESULTS

Neochloris oleoabundans cells were grown at 32 °C in the presence of a high concentration of nitrate-phosphate, causing a cell disruption extent of 83.6%. Further, a two-fold increase in lipid recovery following melittin treatment and solvent extraction was observed. Additionally, it was possible to verify the effects of melittin, both before and after treatment on the morphology of the cells. Scanning electron microscopy (SEM) and confocal images of the melittin-treated microalgae revealed extensive cell damage with degradation of the cell wall and release of intracellular material.

CONCLUSIONS

Melittin produced a selective cell wall rupture effect in N. oleoabundans under some culture conditions. These results represent the first report on the effect of melittin on lipid recovery from microalgae.

Noctiluca scintillans bloom alters the composition and carbohydrate utilization of associated bacterial community and enriches potential pathogenic bacterium Vibrio anguillarum

Noctiluca scintillans (red) is a widely distributed heterotrophic dinoflagellate and a prominent red tide forming species. This study investigated the effects of Noctiluca blooms on marine microbial diversity and functionality using multi-omics approaches. Our findings revealed significant differences in the community composition of Noctiluca-associated bacteria compared to those associated with autotrophic plankton and free-living bacteria in the surrounding seawater. The dominant bacterial groups within the Noctiluca-associated community shifted at various bloom stages, which could be attributed to changes in prey composition of Noctiluca. During the non-bloom stage, Burkholderiaceae, Carnobacteriaceae, and Pseudomonadaceae dominated the community, while Vibrionaceae became dominant during the bloom stage, and Saprospiraceae, Crocinitomicaceae, and Pirellulaceae thrived during the post-bloom stage. Compared to the non-bloom stage, Noctiluca-associated bacterial community at the bloom stage exhibited significant down-regulation of genes related to complex carbohydrate metabolism, while up-regulation of genes related to glucose transportation and utilization. Furthermore, we identified Vibrio anguillarum, a potential pathogenic bacterium to marine fish, as a major component of the Vibrionaceae family during the bloom stage. The occurrence of V. anguillarum associated with Noctiluca blooms may be attributed to the increased availability of its preferred carbon sources and its high capabilities in glucose transportation, motility and chemotaxis. Moreover, the presence of Vibrio infection genes (hap, hlyA, rtxA) encoding vibriolysin, hemolysin, and RTX (Repeats-in-toxin) toxin in the V. anguillarum genome, with the hap gene showing high expression levels during Noctiluca blooms, indicates an elevated risk of infection. This study underscores the unique composition of the bacterial community associated with red tide forming heterotrophic dinoflagellates and suggests that Noctiluca cells may serve as reservoirs and vectors for pathogenic bacteria, potentially posing a threat to fish-farming and the health of other marine organisms.

Innovative strategies in algal biomass pretreatment for biohydrogen production

Biohydrogen is one of the cleanest renewable energies with a high calorific value. Algal biomass can be utilized as a sustainable feedstock for biohydrogen production via dark fermentation. However, the recovery of fermentable sugar from algal biomass is challenging because of the diversity and complex cell wall composition and therefore, requires an additional pretreatment step. However, most of the conventional pretreatment strategies suffer from limited technological feasibility and poor economic viability. In this context, this review aims to present the structural complexities of the cell wall of algae and highlight the innovative approaches such as the use of hybrid technologies, biosurfactants, nanoparticles, and genetic engineering approaches for the hydrolysis of algal biomass and improved biohydrogen production. Additionally, a comprehensive discussion of the comparative evaluation of various pretreatment methods, and the techno-economic and life cycle assessment of algal biohydrogen production is also presented in this review.

Sustainable production of biohydrogen from algae biomass: Critical review on pretreatment methods, mechanism and challenges

The production of chemicals and energy from sustainable biomass with an important objective decreasing carbon impressions has recently become one of the key areas of attention. Algae biomass have been recognized and researched as a potential renewable biomass of biohydrogen production attributed to their limited multiplying time, fast growing qualities and ability of lipid accumulation. This review additionally envelops various key perspectives such as composition and properties of algae biomass and pretreatment strategies such as physical, chemical and biological methods adopted for the algae biomass. This review is mainly focused on pretreatment strategies which have been developed to enhance biohydrogen production. The present review deals with methods and mechanism, enzymes involved and factors influencing on biohydrogen production which help to grasp various bottlenecks, challenges and constraints. Finally, the significant progressions and economical perspective on improving biohydrogen yield because of the expansion of co-substrates and the current trends are examined.

Biosorption of chromium (VI), iron (II), copper (II), and nickel (II) ions onto alkaline modified Chlorella vulgaris and Spirulina platensis in binary systems

The simultaneous biosorption of chromium (VI), copper (II), iron (II), and nickel (II) was investigated by alkaline-modified Chlorella vulgaris and Spirulina platensis in binary systems. The alkaline modified biosorbents were CV-KCl, SP-KCl, CV-Na2CO3, and SP-Na2CO3. The maximum removal efficiency recorded in this study was 99.7% with a biosorbent dosage of 0.3 g within a pH range of 2 to 6. The highest biosorption capacities obtained were 14.1, 13.5, 21.6, and 15.8 mg/g for Cr (VI), Cu (II), Fe (II), and Ni (II), respectively. The pseudo-second-order best described the biosorption rate, while the Langmuir isotherm model best described the biosorption equilibrium interaction. The values for Gibbs free energy (ΔG°) were in the range of 0.5 to 6.5 kJ/mol (Cr-Fe), 1.3 to 8.4 kJ/mol (Cr-Ni), and 3.9 to 11.3 kJ/mol (Cr-Cu) binary systems. This showed that the biosorption processes were characterized by physisorption reactions. The Temkin constant B values were in the range of 0.339 to 1.485 kcal/mol and the biosorption processes were largely exothermic reactions. The values for the Freundlich constant KF were between 1.4 and 10.4 (L/g), which indicated favourable biosorption. The Temkin isotherm model confirmed a strong binding affinity for Fe (II) and Ni (II). The results suggest that potassium chloride and sodium carbonate modification are very suitable for green algae and cyanobacteria for the efficient removal of heavy metals.

Recent Advances in Biomass Pretreatment Technologies for Biohydrogen Production

Hydrogen is an economical source of clean energy that has been utilized by industry for decades. In recent years, demand for hydrogen has risen significantly. Hydrogen sources include water electrolysis, hydrocarbon steam reforming, and fossil fuels, which emit hazardous greenhouse gases and therefore have a negative impact on global warming. The increasing worldwide population has created much pressure on natural fuels, with a growing gap between demand for renewable energy and its insufficient supply. As a result, the environment has suffered from alarming increases in pollution levels. Biohydrogen is a sustainable energy form and a preferable substitute for fossil fuel. Anaerobic fermentation, photo fermentation, microbial and enzymatic photolysis or combinations of such techniques are new approaches for producing biohydrogen. For cost-effective biohydrogen production, the substrate should be cheap and renewable. Substrates including algal biomass, agriculture residue, and wastewaters are readily available. Moreover, substrates rich in starch and cellulose such as plant stalks or agricultural waste, or food industry waste such as cheese whey are reported to support dark- and photo-fermentation. However, their direct utilization as a substrate is not recommended due to their complex nature. Therefore, they must be pretreated before use to release fermentable sugars. Various pretreatment technologies have been established and are still being developed. This article focuses on pretreatment techniques for biohydrogen production and discusses their efficiency and suitability, including hybrid-treatment technology.

Bioactive substances and potentiality of marine microalgae

Microalgae is one of the most important components in the aquatic ecosystem, and they are increasingly used in food and medicine production for human consumption due to their rapid growth cycle and survival ability in the harsh environment. Now, the exploration of microalgae has been gradually deepening, mainly focused on the field of nutrition, medicine, and cosmetics. A great deal of studies has shown that microalgae have a variety of functions in regulating the body health and preventing disease, such as nitrogen fixation, antitumor, antivirus, antioxidation, anti-inflammatory, and antithrombotic. Furthermore, microalgae can synthesize various high-valued bioactive substances, such as proteins, lipids, polysaccharides, and pigments. In this paper, we have briefly reviewed the research progress of main bioactive components in microalgae, proteins, lipids, polysaccharides, pigments, and other nutrients included, as well as their present application situation. This paper can provide the guidance for research and development of industrial production of microalgae.

Advances in microalgal cell wall polysaccharides: a review focused on structure, production, and biological application

Microalgae have been shown to be useful in several biotechnological fields due to their feasible cultivation and high-value biomolecules production. Several substances of interest produced by microalgae, such as: proteins, lipids, and natural colorants, have already been explored. Based on the continuing demand for new natural molecules, microalgae could also be a valuable source of polysaccharides. Polysaccharides are extremely important in aquaculture, cosmetics, pharmaceutical, and food industries, and have great economic impact worldwide. Despite this, reviews on microalgal polysaccharide production, biological activity, and chemical structure are not abundant. Moreover, techniques of microalgal cultivation, coupled with carbohydrate production, need to be clarified in order to develop forward-looking technologies. The present review provides an overview of the main advances in microalgal cell wall polysaccharide production, as well as their associated potential biological applications and chemical structure. Several studies on future prospects, related to microalgae are presented, highlighting the key challenges in microalgal polysaccharide production.

Carbon flow conversion induces alkali resistance and lipid accumulation under alkaline conditions based on transcriptome analysis in Chlorella sp. BLD

Alkaline environments are abundant globally and cause damage to most organisms, while some microalgae can grow well and accumulate lipids under those conditions. Here the mechanisms of alkali resistance and lipid accumulation in the alkaliphilic microalgae Chlorella sp. BLD were explored using physiological-biochemical and transcriptome analysis. When cultivated at alkaline pH, Chlorella sp. BLD exhibited good alkali-resistance ability and increased biomass (0.97 g L^-1). The biochemical composition of Chlorella sp. BLD changed significantly (lipid content increased 39% and protein content decreased 19.5%) compared with pH 7.5. Through transcriptome analysis, we found that pathways related to carbon metabolism such as photosynthesis, glycolysis, and the TCA cycle were significantly regulated under alkaline conditions. Genes that encoding the key enzyme in carbon-related metabolism such as Rubisco, AMY, PK, ME, CS, ACAT, KAS, and DGAT were identified. Transcriptional regulation of these genes results in carbon flow switching from starch and protein to cell wall metabolism, organic acid synthetic and lipid accumulation in response to alkaline conditions. These results reveal the alkali resistance mechanism of Chlorella sp. BLD and provide a theoretical basis for microalgae oil production under alkaline conditions.

Electrorotation of single microalgae cells during lipid accumulation for assessing cellular dielectric properties and total lipid contents

Photosynthetic microalgae not only perform fixation of carbon dioxide but also produce valuable byproducts such as lipids and pigments. However, due to the lack of effective tools for rapid and noninvasive analysis of microalgal cellular contents, the efficiency of strain screening and culture optimizing is usually quite low. This study applied single-cell electrorotation on Scenedesmus abundans to assess cellular dielectric properties during lipid accumulation and to promptly quantify total cellular contents. The experimental electrorotation spectra were fitted with the double-shell ellipsoidal model, which considered varying cell wall thickness, to obtain the dielectric properties of cellular compartments. When the amount of total lipids increased from 15.3 wt% to 33.8 wt%, the conductivity and relative permittivity of the inner core (composed of the cytoplasm, lipid droplets, and nucleus) decreased by 21.7% and 22.5%, respectively. These dielectric properties were further used to estimate the total cellular lipid contents by the general mixing formula, and the estimated values agreed with those obtained by weighing dry biomass and extracted lipids with an error as low as 0.22 wt%. Additionally, the conductivity and relative permittivity of cell wall increased during nitrogen-starvation conditions, indicating the thickening of cell wall, which was validated by the transmission electron microscopy.

Pretreatment of microalgal biomass for efficient biohydrogen production - Recent insights and future perspectives

Biohydrogen is a plausible alternative fuel solution for the contemporary issues regarding global warming and the steadily increasing greenhouse gas emissions, because of its high energy content and carbon-free combustion properties. Hydrogen does not exist in its natural state and the current hydrogen production technologies (steam methane reforming, water splitting) are energy-intensive, accompanied by a huge carbon footprint. Dark fermentative hydrogen production by anaerobic hydrogen-producing bacteria is a green, sustainable and emission-free pathway for hydrogen production. Microalgal biomass is considered as the third generation biofuel feedstock and is receiving academic and industrial research attention for its carbon sequestration abilities. This review discusses in detail about the pretreatment methods that could be adapted for microalgal biomass for effective biohydrogen production. Microalgal cell wall structure and the associated polymeric carbohydrates that offer certain recalcitrance are critically analyzed and future research perspectives are presented.

Effect of growth conditions on the efficiency of cell disruption of Neochloris oleoabundans

The impact of four different growth conditions on the cell disruption efficiency of Neochloris oleoabundans was investigated. A mechanical and biological cell disruption methods were evaluated separately and combined. It has been established that microalgae grown in marine water under nitrogen deprivation were the most resistant against cell disruption methods and released the lowest amount of proteins. The release of lipids, however, followed the "hindered molecule diffusion phenomenon" because it did not follow the same release pattern as proteins. The enzymatic treatment was efficient enough to release the majority of the proteins without combining it with high-pressure homogenization. Regarding energy input, Neochloris oleoabundans grown in marine water under nitrogen deprivation required the highest energy input to release proteins (E_p = 13.76 kWh.kg^-1) and to break the cells by high-pressure homogenization (E_{x - HPH} = 1.14 kWh.kg^-1) or by the combination of enzymes and High-pressure homogenization (E_{x - ENZ} = 2.79 kWh.kg^-1).