Highly efficient elimination of uranium from wastewater with facilely synthesized Mg-Fe layered double hydroxides: Optimum preparation conditions and adsorption kinetics

Flexible self-supporting Na3MnTi(PO4)3@C fibers for uranium extraction from seawater by electro sorption

As an eco-friendly technique with the superior adsorption performance, electroadsorption has shown great potential for application in uranium (U(VI)) recovery in recent years. However, the electrodes used in the electrosorption generally suffer the adsorbent to be loaded on the conductors, which greatly limited the adsorption performance of the electrodes for uranyl ions. In present study, a flexible self-supporting Na3MnTi(PO4)3@C fibers (NMTP@C fibers) electrode material was rationally designed and prepared by electrostatic spinning method and annealing technique, and its ability to capture U(VI) efficiently was preliminarily demonstrated by batch adsorption and electro sorption. The plentiful phosphate groups provide sufficient active sites for adsorption, while the axially continuous electron conduction and radially short-range ion transport give NMTP@C fibers fast charge/ion transport capability. The NMTP@C fiber can remove 99% of 5 ppm U(VI) in seawater by electro absorption within 1 h. After several cycles of adsorption under seawater conditions, the adsorbent can still maintain a stable adsorption capacity. The adsorption mechanism of NMTP@C nanofibers for U(VI) was investigated by XPS, FT-IR, Raman, SEM-EDS, and XRD, which was electrostatic interactions and surface complexation. These results suggest that NMTP@C fibers are promising high-capacity adsorbents for efficient and selective capture of U(VI) from seawater.

Improving U(VI) retention efficiency and cycling stability of GCN-supported calcined-LDH composite: Mechanism insight and real water system applications

The synthesis and characterization of graphitic carbon nitride (GCN) and its composites with calcined layered double hydroxide (CLDH) were examined in this investigation. The goal was to assess these composites' maximum adsorption capacity (qmax) for U(VI) ions in wastewater. Several different characterization methodologies were utilized to examine the fabricated substances. These methods encompass X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The GCN-CLDH composite displayed enhanced adsorption ability towards U(VI) ions due to its high surface functionality. Langmuir adsorption isotherm analysis showed that more than 99% of U(VI) ions were adsorbed, with a qmax of 196.69 mg/g. The kinetics data exhibited a good fit for a pseudo-second-order (PSO) model. Adsorption mechanisms involving precipitation and surface complexation via Lewis's acid-base interactions were proposed. The application of the GCN-CLDH composite in groundwater demonstrated adsorption below the maximum permissible limit established by USEPA, indicating improved cycling stability. These observations underscore the capacity of the GCN-CLDH composite's proficiency in adsorbing U(VI) aqueous solutions containing radioactive metals.

Construction of dopamine supported Mg(Ca)Al layered double hydroxides with enhanced adsorption properties for uranium

A novel dopamine-supported Mg(Ca)Al layered double hydroxide composite was synthesized by co-precipitation method. The existence of Ca²⁺ and dopamine could promote the capture of uranium on the layered double hydroxides. In batch experiments, the composite exhibited good uranium removal performance, including high adsorption capacity (687.3 mg/g), strong anti-interference and good reusability (the removal percentage was still higher than 90 % after five cycles). At low initial uranium concentration, the uranium removal percentage on the composite exceeded 99.7 % and the residual concentration of uranium in the solution was <0.03 mg/L, reaching the limited standard of the World Health Organization. The studies of adsorption kinetics and isotherm indicated that the uranium adsorption behavior on the composite conformed to the pseudo-second-order kinetic and Langmuir isotherm models, suggesting that the process was a monolayer adsorption dominated by chemical adsorption. Furthermore, the high-efficiency uranium adsorption on the Mg(Ca)Al layered double hydroxide was mainly attributed to the strong complexation between the active sites (-OH and -NH₂) and uranium, the precipitation of interlayer intercalation ions (CO₃^2- and OH^-) to uranium and the ion exchange of Ca²⁺ to uranium. Due to these advantages, the dopamine-supported Mg(Ca)Al layered double hydroxide composite is expected to be used as fine adsorbent to remove uranium from wastewater.

Nonthermal plasma-irradiated polyvalent ferromanganese binary hydro(oxide) for the removal of uranyl ions from wastewater

Nonthermal plasma (NTP) irradiation was employed to adjust the morphological structures and valence distribution of ferromanganese (Fe-Mn)-based binary hydro (oxide) to enhance the heterogeneous adsorption of uranyl ions. The output voltage and the liquid-plate distance played a more vital role among the NTP factors in the irradiation system in influencing the polyvalent Fe-Mn binary hydro (oxide) (poly-Fe-Mn). The formation of plates, flakes, and nanoscale nodules was specifically observed, which caused more pores and fractures in the poly-Fe-Mn binary hydro (oxide). The poly-Fe-Mn performed explicitly better in the adsorption of uranium ions in comparison with the counterpart of the Fe-Mn, which was appropriately fitted by the pseudofirst-order kinetic and Elovich models. Maximum equilibrium adsorption capacities of 663.92 and 923.45 mg/g were obtained for the Fe-Mn and poly-Fe-Mn binary hydro (oxides) toward U ions in the orthogonal design, respectively. The maximum monolayer adsorption capacity achieved by the fitting of the Langmuir model was 1091.10 mg/g. Both physisorption and chemisorption contributed to the heterogeneous process of the poly-Fe-Mn toward uranium ions. The employment of NTP irradiation changed the monolayer adsorption of the traditional Fe-Mn materials and diversified the reaction mechanisms between the interface of the Fe-Mn materials and uranium ions. The elements, including O, N, and U exhibited higher compatibility and overlapped in the samples. The highly effective capture of uranium ions from the solution by the poly-Fe-Mn binary hydro (oxide) was mainly related to the chemical deposition of O and N radicals.

Adsorption of caffeine using steel wastes

Caffeine is the most widespread active pharmaceutical compound in the world, generally studied as a tracer of human pollution, since caffeine levels in surface water correlate with the anthropogenic load of domestic wastewater. This work investigated the use of different steel wastes named as SW-I, SW-II, SW-II, SW-IV, SW-V, and SW-VI in the adsorption of caffeine. These materials were pretreated and characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and point of zero charge. The samples are mainly composed of iron (hematite and magnetite). The caffeine adsorption test indicated that SW-VI (steel slag dust) is the most efficient and promising (removal around 51.68%) in relation to the other residues, which it was selected for further studies. Equilibrium time was reached within 96 h of contact between the adsorbent and the adsorbate, with removal of 84.00%, 81.09%, and 73.19% for the initial concentrations of 10 mg L-1, 20 mg L-1, and 30 mg L-1 of caffeine. The pseudo-first-order, pseudo-second-order, and Elovich models presented a good fit to the experimental data. However, the pseudo-first order model described better the experimental behavior. Adsorption isotherms were performed at three temperatures (298, 308, and 318 K). The maximum adsorption capacity was 17.46 ± 2.27 mg g-1, and experimental data were better fitted by the Sips isotherm. Values of ΔG° and parameters equilibrium of the models of Langmuir, Sips, and Temkin were calculated from the standard enthalpies and standard entropies estimated. The values of ΔG° were negative for the temperatures studied indicating that the adsorption process is viable and spontaneous. Negative values for ΔH° were also found, indicating that the process of caffeine adsorption by SW-VI is an exothermic process (0 to -40 kJ mol-1). Thus, the adsorption of caffeine by SW-VI is a physical process. The SW-VI material showed economic viability and promising for the adsorption of caffeine in aqueous media.

A critical review of uranium contamination in groundwater: Treatment and sludge disposal

Dissolved uranium in groundwater at high concentrations is an emerging global threat to human and ecological health due to its radioactivity and chemical toxicity. Uranium can enter groundwater by geochemical reactions, natural deposition from minerals, mining, uranium ore processing, and spent fuel disposal. Although much progress has been made in uranium remediation in recent years, most published reviews on uranium treatment have focused on specific methods, particularly adsorption. This article systematically reviews the major treatment technologies, explains their mechanism and progress of uranium removal, and compares their performance under various environmental conditions. Of all treatment methods, adsorption has received much attention due to its ease of use and adaptability under various conditions. However, salinity and competition from other ions limit its application in actual field conditions. Biosorption and bioremediation are also promising methods due to their low-cost and chemical-free operation. Strong base anion exchange resins are more effective at typical groundwater pH conditions. Advanced oxidation processes like photocatalysis produce less sludge and are effective even at low uranium concentrations. Electrocoagulation shows significantly improved performance when organic ligands are added prior to treatment. The significant advantages of membrane filtration are high removal efficiency and the ability to recover uranium. While each technology has its merits and demerits, no single technology is entirely suitable under all conditions. One major area of concern with all technologies is the need to dispose of liquid and solid waste generated after treatment safely. Future research must focus on developing hybrid and state-of-the-art technologies for effective and sustainable uranium removal from groundwater. Developing holistic management strategies for uranium removal will hinge on understanding its speciation, mechanisms of fate and transport, and socio-economic conditions of the affected areas.

A novel spectrofluorimetric method based on a reaction with an azoisoxazoles-benzenesulfonamide derivative for determination of uranium (VI) ions in water samples

Selective fluorometric detection and determination of uranium ions is provided here using a novel fluorescent reagent, namely (E)-4-([4-hydroxynaphthalen-1-yl]diazenyl)-N-(5-methyleisoxazol-3-yl) benzenesulfonamide (UVI reagent). The UVI reagent offers a selective fluorescence enhancement behaviour at emission wavelength = 557 nm. The parameters affecting fluorometric detection of uranium ions, such as the pH, solvent type, ligand concentration, interaction time, and interfering ions, were investigated and adjusted. The proposed UVI reagent can detect and determine uranium ions even at low concentrations, for which the obtained limit of detection was 0.1 ppm. Additionally, this proposed determination protocol was successfully used to detect, monitor, and determine uranium ions in actual water samples.

Uranium isotopes in groundwater in Ho Chi Minh City and related issues: Health risks, environmental effects, and mitigation methods

Groundwater is regularly used for many purposes, such as drinking and agricultural irrigation systems. Still, it contains high levels of radionuclides (e.g., ²³⁸U, ²³²Th, and ²²⁶Ra) that are potentially hazardous to humans and the environment. In this study, activity concentrations of uranium isotopes were analyzed in 15 groundwater samples taken from 15 bored wells in Thu Duc district, Ho Chi Minh City, Vietnam. Environmental effects of the irrigation system with groundwater on agricultural soil in the study area were assessed by models. It was found that the activity concentrations of ²³⁸U and ²³⁴U in groundwater samples were in the ranges of (13.5-268.7) mBq l^-1 and (20.2-438.3) mBq l^-1, respectively. The ratio ²³⁴U/²³⁸U values were ranged from 1.12 to 2, with an average value of 1.44. Based on the model prediction, 25 years irrigation with the groundwater can inject 94.8 Bq both uranium isotopes in 1 kg topsoil. For investigated groundwater samples, the proposed removal method using K₂FeO₄ removed 74.28% and 81.04% for ²³⁴U and ²³⁸U, respectively.

Preparation of novel porous Al2O3-SiO2nanocomposites via solution-freeze-drying-calcination method for the efficient removal of uranium in solution

In this work, the efficient extraction of uranium in solution using Al₂O₃-SiO₂-T was reported. Kinetics and isotherm models indicated that the removal process of uranium on Al₂O₃-SiO₂-T accorded with pseudo-second-order kinetic model and Langmuir isotherm model, which showed that the adsorption process was a uniform mono-layer chemical behavior. The maximum adsorption capacity of Al₂O₃-SiO₂-T reached 738.7 mg g^-1, which was higher than AlNaO₆Si₂(349.8 mg g^-1) and Al₂O₃-SiO₂-NT (453.1 mg g^-1), indicating that the addition of template could effectively improve the adsorption performance of Al₂O₃-SiO₂to uranium. Even after five cycles of adsorption-desorption, the removal percentage of uranium on Al₂O₃-SiO₂-T remained 96%. Besides, the extraction efficiency of uranium on Al₂O₃-SiO₂-T was 72.5% in simulated seawater, which suggested that the Al₂O₃-SiO₂-T was expected to be used for uranium extraction from seawater. Further, the interaction mechanism between Al₂O₃-SiO₂-T and uranium species was studied. The results showed that the electrostatic interaction and complexation played key roles in the adsorption process of Al₂O₃-SiO₂-T to uranium.

Design of 3D alumina-doped magnesium oxide aerogels with a high efficiency removal of uranium(vi) from wastewater

3D alumina-doped magnesium oxide (Al₂O₃/MgO) aerogels with remarkable adsorption properties for U(vi) were prepared via a simple lyophilization–calcination method.