Faster analysis of radiopharmaceuticals using ultra performance liquid chromatography (UPLC) in combination with low volume radio flow cell

Development of High-Throughput Experimentation Approaches for Rapid Radiochemical Exploration

Positron emission tomography is a widely used imaging platform for studying physiological processes. Despite the proliferation of modern synthetic methodologies for radiolabeling, the optimization of these reactions still primarily relies on inefficient one-factor-at-a-time approaches. High-throughput experimentation (HTE) has proven to be a powerful approach for optimizing reactions in many areas of chemical synthesis. However, to date, HTE has rarely been applied to radiochemistry. This is largely because of the short lifetime of common radioisotopes, which presents major challenges for efficient parallel reaction setup and analysis using standard equipment and workflows. Herein, we demonstrate an effective HTE workflow and apply it to the optimization of copper-mediated radiofluorination of pharmaceutically relevant boronate ester substrates. The workflow utilizes commercial equipment and allows for rapid analysis of reactions for optimizing reactions, exploring chemical space using pharmaceutically relevant aryl boronates for radiofluorinations, and constructing large radiochemistry data sets.

Accelerating radiochemistry development: Automated robotic platform for performing up to 64 droplet radiochemical reactions in a morning

The growing discovery and development of novel radiopharmaceuticals and radiolabeling methods requires an increasing capacity for radiochemistry experiments. However, such studies typically rely on radiosynthesizers designed for clinical batch production rather than research, greatly limiting throughput. Two general solutions are being pursued to address this: developing new synthesis optimization algorithms to minimize how many experiments are needed, and developing apparatus with enhanced experiment throughput. We describe here a novel high-throughput system based on performing arrays of droplet-based reactions at 10 μL volume scale in parallel. The automatic robotic platform can perform a set of 64 experiments in ~3 h (from isotope loading to crude product, plus sampling onto TLC plates), plus ~1 h for off-line radio-TLC analysis and radioactivity measurements, rather than the weeks or months that would be needed using a conventional system. We show the high repeatability and low crosstalk of the platform and demonstrate optimization studies for two 18F-labeled tracers. This novel automated platform greatly increases the practicality of performing arrays of droplet reactions by eliminating human error, vastly reducing tedium and fatigue, minimizing radiation exposure, and freeing up radiochemist time for other intellectually valuable pursuits.

Radiolabeled nanomaterial for cancer diagnostics and therapeutics: principles and concepts

In the last three decades, radiopharmaceuticals have proven their effectiveness for cancer diagnosis and therapy. In parallel, the advances in nanotechnology have fueled a plethora of applications in biology and medicine. A convergence of these disciplines has emerged more recently with the advent of nanotechnology-aided radiopharmaceuticals. Capitalizing on the unique physical and functional properties of nanoparticles, radiolabeled nanomaterials or nano-radiopharmaceuticals have the potential to enhance imaging and therapy of human diseases. This article provides an overview of various radionuclides used in diagnostic, therapeutic, and theranostic applications, radionuclide production through different techniques, conventional radionuclide delivery systems, and advancements in the delivery systems for nanomaterials. The review also provides insights into fundamental concepts necessary to improve currently available radionuclide agents and formulate new nano-radiopharmaceuticals.

Performance evaluation of a MIP for the MISPE-LC determination of p-[18F]MPPF and a potential metabolite in human plasma

Within the family of serotonin (5-HT) receptors, the 5-HT_1A subtype is particularly interesting as it may be involved in various physiological processes or psychological disorders. The p-[¹⁸F]MPPF, a highly selective 5-HT_1A antagonist, is used for in vivo studies in human or animal by means of positron emission tomography (PET) [1]. In order to selectively extract p-[¹⁸F]MPPF and its main metabolites from plasma, molecularly imprinted polymer (MIP) was prepared against these compounds by using the p-MPPF as template. For the control of the selectivity, non-imprinted polymer (NIP) was also synthesized without template. The MIP sorbent, packed in disposable extraction cartridges (DECs), was then evaluated as molecularly imprinted solid-phase extraction (MISPE) prior to the LC determination. The conditions of extraction were evaluated in order to obtain the highest selective retention of the p-[¹⁸F]MPPF and its metabolites on this MIP. The MIP selectivity was exploited in the loading and washing steps by adjusting the pH of plasma samples at a suitable value and by selecting mixtures for the washing step to limit the contribution of non-specific interactions. Other important parameters involved in the conditioning and elution steps were also studied. Finally, a pre-validation was carried out with optimal extraction conditions to demonstrate the performance of this MISPE-LC method as a generic method in the context of evaluation of new MISPE for p-[¹⁸F]MPPF and its potential for metabolites extraction from human plasma.

Design and Challenges of Radiopharmaceuticals

This review describes general concepts with regard to radiopharmaceuticals for diagnostic or therapeutic applications that help to understand the specific challenges encountered during the design, (radio)synthesis, in vitro and in vivo evaluation and clinical translation of novel radiopharmaceuticals. The design of a radiopharmaceutical requires upfront decisions with regard to combining a suitable vector molecule with an appropriate radionuclide, considering the type and location of the molecular target, the desired application, and the time constraints imposed by the relatively short half-life of radionuclides. Well-designed in vitro and in vivo experiments allow nonclinical validation of radiotracers. Ultimately, in combination with a limited toxicology package, the radiotracer becomes a radiopharmaceutical for clinical evaluation, produced in compliance with regulatory requirements for medicines for intravenous (IV) injection.

Recent Progress toward Microfluidic Quality Control Testing of Radiopharmaceuticals

Radiopharmaceuticals labeled with short-lived positron-emitting or gamma-emitting isotopes are injected into patients just prior to performing positron emission tomography (PET) or single photon emission tomography (SPECT) scans, respectively. These imaging modalities are widely used in clinical care, as well as in the development and evaluation of new therapies in clinical research. Prior to injection, these radiopharmaceuticals (tracers) must undergo quality control (QC) testing to ensure product purity, identity, and safety for human use. Quality tests can be broadly categorized as (i) pharmaceutical tests, needed to ensure molecular identity, physiological compatibility and that no microbiological, pyrogenic, chemical, or particulate contamination is present in the final preparation; and (ii) radioactive tests, needed to ensure proper dosing and that there are no radiochemical and radionuclidic impurities that could interfere with the biodistribution or imaging. Performing the required QC tests is cumbersome and time-consuming, and requires an array of expensive analytical chemistry equipment and significant dedicated lab space. Calibrations, day of use tests, and documentation create an additional burden. Furthermore, in contrast to ordinary pharmaceuticals, each batch of short-lived radiopharmaceuticals must be manufactured and tested within a short period of time to avoid significant losses due to radioactive decay. To meet these challenges, several efforts are underway to develop integrated QC testing instruments that automatically perform and document all of the required tests. More recently, microfluidic quality control systems have been gaining increasing attention due to vastly reduced sample and reagent consumption, shorter analysis times, higher detection sensitivity, increased multiplexing, and reduced instrumentation size. In this review, we describe each of the required QC tests and conventional testing methods, followed by a discussion of efforts to directly miniaturize the test or examples in the literature that could be implemented for miniaturized QC testing.

Radio-UHPLC: a tool for rapidly determining the radiochemical purity of technetium-99m radiopharmaceuticals?

Determining the radiochemical purity (RCP) of technetium-99m ((99m)Tc) radiopharmaceuticals using the method described in the package insert is a time-consuming process, requiring particular attention in order to achieve accurate RCP results. The purpose of this study was to evaluate whether radio-ultra high performance liquid chromatography (radio-UHPLC) may be an alternative method for RCP testing of (99m)Tc-tetrofosmin, (99m)Tc-MAG3 and (99m)Tc-sestamibi. Results obtained using radio-UHPLC were in excellent agreement with the standard method, with total analysis time being reduced to less than 3 min.