Novel Dy incorporated Ca3Y2B4O12 phosphor: Insights into the structure, broadband emission, photoluminescence and cathodoluminescence characteristics

Enhanced luminescence of Eu3+ in LaAl2B4O10 via energy transfer from Dy3+ doping

In this study, an investigation was conducted on the structural and photoluminescence (PL) characteristics of LaAl2B4O10 (LAB) phosphors initially incorporated with Dy3+ and Eu3+ ions. Subsequently, the impact of varying Eu3+ concentration while maintaining a constant Dy3+ concentration was examined. Structural characterization was performed using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and energy-dispersive X-ray spectroscopy (EDS). XRD analysis confirmed the effective embedding of both dopants into the hexagonal framework of the LAB. The PL emission spectra revealed characteristic emissions of Dy3+ (blue and yellow) and Eu3+ (red) ions. The optimized dopant concentrations of both Dy3+ and Eu3+ were observed to be 3 wt%. The dominant mechanism for concentration quenching in doped LAB phosphors was determined to be the electric dipole-dipole interaction. Co-doping with Eu3+ led to a substantial decrease in Dy3+ emission intensity (∼0.18-fold) while enhancing Eu3+ emission intensity (∼3.72-fold). The critical energy transfer distance (RC = 11.64 Å) and the analysis based on the Dexter theory confirmed that the energy transfer mechanism corresponds to dipole-dipole interaction. The color purities and correlated color temperatures (CCT) were estimated, suggesting the potential of these phosphors for warm white and red lighting applications, respectively. The observed energy transfer and luminescence properties, along with the structural and compositional characterization, highlight the promising potential of LAB:Dy3+/Eu3+ co-doped phosphors for advanced lighting and display technologies.

Temperature-dependent photoluminescence of novel Eu3+, Tb3+, and Dy3+ doped LaCa4O(BO3)3: Insights at low and room temperatures

This study explores the structural and optical qualities of LaCa4O(BO3)3 (LACOB) phosphors doped with Eu3+, Dy3+, and Tb3+ using a microwave-assisted sol-gel technique. It uncovers oxygen-related luminescence defects in LACOB, highlighting emission peaks at 489 and 585 nm for Dy3+, a distinct sharp peak at 611 nm for Eu3+ in the red spectrum, and a notable green emission for Tb3+ due to specific transitions. The photoluminescence (PL) analysis indicates that luminescence is optimized through precise doping, leveraging dipole interactions, and localized resonant energy transfer, which are influenced by dopant concentration and spatial configuration. Temperature studies show emission intensity variations, particularly noticeable below 100 K for Tb3+ doped samples, demonstrating the nuanced balance between thermal quenching and luminescence efficiency. This temperature dependency, alongside the identified optimal doping conditions, underscores the potential of these materials for advanced photonic applications, offering insights into their thermal behavior and emission mechanisms under different conditions.

Structural, morphological, and photoluminescence properties of RE (RE = Dy3+ , Eu3+ , Sm3+ )-doped CaAlBO4 phosphor synthesized by combustion method

The CaAlBO4 :RE (RE = Dy3+ , Eu3+ , Sm3+ ) phosphor were prepared via combustion synthesis and studied by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) analysis, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), photoluminescence (PL) spectra and CIE coordinates. The phase formation of the obtained phosphor was analyzed by XRD and the result was confirmed by standard PDF Card No. 1539083. XRD data successfully indicated pure phase of CaAlBO4 phosphor. The crystal structure of CaAlBO4 phosphor is orthorhombic with space group Ccc2 (37). The SEM image of CaAlBO4 phosphor reveals an agglomerated morphology and non-uniform particle size. The EDS image provides evidence of the elements present and the chemical makeup of the materials. Under the 350 nm excitation, the emission spectrum of Dy3+ activated CaAlBO4 phosphor consists of two main groups of characteristic peaks located at 484 and 577 nm which are ascribed to 4 F9/2  → 6 H15/2 and 4 F9/2  → 6 H13/2 transition of Dy3+ respectively. The PL emission spectra of CaAlBO4 :Eu3+ phosphor shows characteristics bands observed around 591 and 613 nm, which corresponds to 5 D0  → 7 F1 and 5 D0  → 7 F2 transition of Eu3+ respectively, upon 395 nm excitation wavelength. The emission spectra of Sm3+ activated CaAlBO4 phosphor shows three characteristic bands observed at 565, 601 and 648 nm which emits yellow, orange and red color. The prominent emission peak at the wavelength 601 nm, which is attributed to 4 G5/2  → 6 H7/2 transition, displays an orange emission. The CIE color coordinates of CaAlBO4 :RE (RE = Dy3+ , Eu3+ , Sm3+ ) phosphor are calculated to be (0.631, 0.368), (0.674, 0.325) and (0.073, 0.185). As per the obtained results, CaAlBO4 :RE (RE = Dy3+ , Eu3+ , Sm3+ ) phosphor may be applicable in eco-friendly lightning technology.

Comparing the effect of electron beam, beta and ultraviolet C exposure on the luminescence emission of commercial dosimeters

This paper reports on the luminescence characterization of TLD-100 (LiF: Ti, Mg), TLD-200 (CaF₂: Dy), TLD-400 (CaF₂: Mn) and GR-200 (LiF: Mg, Cu, P) dosimeters exposed to electro beam, beta and ultraviolet C radiation -UVC-. All of them show high sensitivity to radiation regardless of whether it is ionizing or partially ionizing radiation based on their luminescence properties (cathodoluminescence -CL- or thermoluminescence -TL-). CL emission differs significantly among them in shape and intensity due to their chemical compositions. LiF samples display three maxima at: (i) 300-450 nm linked to intrinsic and structural defects, (ii) a green waveband probably due to F₃⁺ centres or the presence of hydroxyl groups and (iii) the red-infrared emission band associated with F₂ centres. However, CL spectra from the CaF₂ dosimeters display meaningful differences due to the dopant. TLD-200 is characterized by an emission with four sharp individual peaks in the green-IR spectral region (due to the Dy³⁺), whilst TLD-400 exhibits a broad maximum peaked at ̴500 nm (linked to the Mn²⁺). On the other hand, the variation in the TL glow curves allows to discriminate the TLDs exposed to beta and UVC radiation since they give rise to different chemical-physical processes and that have been studied from the estimation of the kinetic parameters by means of the Computerised Glow Curve Deconvolution (CGCD) method.