Influence of CaCO3 pore-forming agent on porosity and thermal conductivity of cellulose acetate materials prepared by non-solvent induced phase separation

Enhanced porous membrane fabrication using cellulose acetate and citric acid: Improved structural integrity, thermal stability, and gas permeability

In this study, our primary objective was to enhance the properties of porous membranes by addressing the limitations associated with phase separation. We employed a non-solvent induced phase separation (NIPS) method, utilizing cellulose acetate (CA) in conjunction with citric acid to fabricate these membranes. Citric acid played a dual role: ensuring a uniform pore structure and cross-linking the CA polymer, thereby enhancing its mechanical strength. This approach resulted in the development of a more robust membrane with superior structural integrity. Thermogravimetric analysis (TGA) confirmed enhanced thermal stability, particularly up to 150 °C, as a result of citric acid's cross-linking effect. Beyond 150 °C, the decomposition temperatures of the CA/citric acid membrane were found to be comparable to those of pure CA. Remarkably, a CA/citric acid ratio of 1:0.05 exhibited the slowest decomposition rate as the temperature increased. Scanning electron microscopy (SEM) examination unveiled a sponge-like membrane structure with numerous evenly distributed fine pores. Through the use of citric acid as a plasticizer, we were able to effectively control the penetration of water molecules, preventing the formation of macrovoids and promoting the creation of fine pores. This resulted in the fabrication of a high-porosity membrane, boasting an impressive porosity measurement of 84.9 %. Furthermore, measurements of the Gurley value confirmed efficient gas permeation, a critical characteristic for applications requiring effective gas transport. Fourier transform infrared (FT-IR) spectroscopy attested to the presence of citric acid in the membrane post-phase separation, indicating its successful integration. Our work presents a novel approach to enhance porous membranes, providing improvements in mechanical strength, thermal stability, and gas permeability. These findings offer valuable insights for the development of advanced materials with diverse applications in various fields.

Challenges associated with cellulose composite material: Facet engineering and prospective

Cellulose is the most abundant polysaccharide on earth. It has a large number of desirable properties. Its low toxicity makes it more useful for a variety of applications. Nowadays, its composites are used in most engineering fields. Composite consists of a polymer matrix and use as a reinforcing material. By reducing the cost of traditional fibers, it has an increasing demand for environment-friendly purposes. The use of these types of composites is inherent in moisture absorption with hindered natural fibers. This determines the reduction of polymer composite material. By appropriate chemical surface treatment of cellulose composite materials, the effect could be diminished. The most modern and advanced techniques and methods for the preparation of cellulose and polymer composites are discussed here. Cellulosic composites show a reinforcing effect on the polymer matrix as pointed out by mechanical characterization. Researchers tried their hard work to study different ways of converting various agricultural by-products into useful eco-friendly polymer composites for sustainable production. Cellulose plays building blocks, that are critical for polymer products and their engineering applications. The most common method used to prepare composites is in-situ polymerization. This help to increase the yields of cellulosic composites with a significant enhancement in thermal stability and mechanical properties. Recently, cellulose composites used as enhancing the incorporation of inorganic materials in multi-functional properties. Furthermore, we have summarized in this review the potential applications of cellulose composites in different fields like packaging, aerogels, hydrogels, and fibers.

Graphene nanoplatelet/cellulose acetate film with enhanced antistatic, thermal dissipative and mechanical properties for packaging

With the increased concern over environment protection, cellulose acetate (CA) has drawn great interests as an alternative for packaging material due to its biodegradability and abundant resources; whereas, the poor antistatic property and thermal conductivity restrict its application in packaging. In this work, we proposed a simple but effective strategy to produce high performance graphene nanoplatelet (GNP)/CA composite films via the consecutive homogenization and solvent casting processes. Relying on the spontaneous absorption of CA during homogenization, the GNP/CA produced shows an excellent dispersibility in the N,N-Dimethylformamide (DMF) solution and many fewer structural defects compared with GNPs alone. As a result, the composite films obtained exhibit simultaneously and significantly enhanced antistatic, heat dissipative and mechanical properties compared with CA. Specifically, the GNP/CA composite with the optimal formula has promising overall performances (namely, surface resistivity of 3.33 × 10⁷ Ω/sq, in-plane thermal conductivity of 5.359 W ( m · K ) , out-of-plane thermal conductivity of 0.785 W ( m · K ) , and tensile strength of 37.1 MPa). Featured by its promising overall properties, simple production processes and biodegradability, the as-prepared GNP/CA composite film shows a great potential for application in packaging.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10570-023-05155-2.

Antifouling Membranes Based on Cellulose Acetate (CA) Blended with Poly(acrylic acid) for Heavy Metal Remediation

Fouling has been widely recognized as the Achilles’ heel of membrane processes and the growing perception about the relevance of this critical issue has driven the development of advanced antifouling strategies. Herein, novel fouling-resistant ultrafiltration (UF) membranes for Cadmium (Cd) remediation were developed via a blending method by combining the flexibility of cellulose acetate (CA) with the complex properties of poly(acrylic acid) (PAA). A systematic characterization, based on differential scanning calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FTIR), confirmed the homogeneity of the blend favored by hydrogen interconnections between CA and PAA polymeric chains. The concentration of PAA with respect to CA played a key role in tuning the morphology and the hydrophilic character of the novel UF membranes prepared via non-solvent-induced phase separation (NIPS). UF experiments revealed the tremendous advantages of the blend since CA/PAA membranes showed superior performance with respect to the neat CA membrane in terms of (i) water permeability; (ii) Cd rejection; and (iii) antifouling resistance to humic acid (HA). Concisely, the increasing of the concentration of PAA in the casting solution was found to be beneficial to improve the flux recovery ratio (FRR) coupled with the decline of the total fouling ratio (Rt). Overall, PAA is an effective additive to prepare CA membranes with enhanced antifouling properties exploitable for the remediation of water bodies contaminated by heavy metals via UF process.