Enhanced sunlight-absorption of Fe2O3 covered by PANI for the photodegradation of organic pollutants and antimicrobial inactivation

In-situ Hf/Zr co-doped Fe2O3 nanorod decorated with CuOx/CoOx: Enhanced photocatalytic performance for antibacterial and organic pollutants

Herein, we successfully synthesized Hf/Zr co-doping on Fe2O3 nanorod photocatalyst by a hydrothermal process and quenching methods. The synergistic roles of Hf and Zr double-doping on the bacteria inactivation test and decomposition of organic pollutants were investigated in detail for the 1 wt% CoOx loaded Hf/Zr-Fe2O3 NRs and CuOx/CoOx loaded Hf/Zr-Fe2O3 NRs photocatalyst. Initially, the rod-like porous morphology of the Hf/Zr-doped Fe2O3 NRs was produced via a hydrothermal method at various Hf co-doping (0, 2, 4, 7 and 10)%. Further, CoOx and CuOx loaded by a wet impregnation approach on the Hf/Zr-Fe2O3 NRs and a highly photoactive Hf(4)/Zr-Fe2O3 [CoOx/CuOx] NRs photocatalyst were developed. After the Hf(4)/Zr-Fe2O3 [CoOx/CuOx] NRs photocatalyst treatment, the Bio-TEM imagery of bacterial cells showed extensive morphological deviations in cell membranes. Hf(4)/Zr-Fe2O3 NR achieved 84.1% orange II degradation upon 3 h illumination, which is higher than that of Hf-Fe2O3 and Zr-Fe2O3 (68.7 and 73.5%, respectively). Additionally, the optimum sample, Hf(4)/Zr-Fe2O3 [CoOx/CuOx] photocatalyst, exhibited 95.5% orange II dye degradation after light radiation for 3 h. Optimized Hf(4)/Zr-Fe2O3 [CoOx/CuOx] catalysts exhibited 99.9% and 99.7% inactivation of E. coli and S. aureus with 120 min, respectively. Further, scavenger experiments revealed that the electrons are the primary responsible species for photocatalytic kinetics. This work will provide a rapid method for the development of high photocatalytic performance materials for bacterial disinfection and organic degradation.

Green synthesis of zinc oxide nano particles using Allium cepa L. waste peel extracts and its antioxidant and antibacterial activities

Synthesis of nanoparticles through the green approach using plant and vegetable extracts has gained popularity since they are thought to be efficient and cost-effective materials. This study is designed to synthesize zinc oxide nanoparticles (ZnO-NPs) from onion waste peel extract (Allium cepa L.) via the green synthesis approach. The synthesized ZnO-NPs were characterized by utilizing the UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), Energy Dispersive X-ray (EDX), Field Emission Scanning Electron Microscopy (FE-SEM) and X-ray Powder Diffraction (XRD)techniques. The nanoparticles formation was confirmed by the UV-Vis sharp absorption spectra at 318 and 322 nm. The synthesized ZnO-NPs size and shape was revealed by the XRD and SEM respectively. Smallest nanoparticle average crystallite size was found 57.38 nm with hexagonal shape. The bioactive functional groups that are in charge of capping and stabilizing the ZnO-NPs was assured by the FTIR data. Further, prepared ZnO-NPs were used to assess their possible antioxidant and antibacterial properties. DPPH test for free radical scavenging showed potential antioxidant properties of the synthesized ZnO-NPs. The antibacterial activity were studied against three clinical strains: P. aeruginosa, E. coli, and S. aureus with the maximum zone of inhibition 13.17 mm, 22.00 mm and 12.35 mm respectively at 100 μg/mL subsequently minimum inhibitory concentration was found 50 μg/mL for P. aeruginosa, and S. aureus whereas 100 μg/mL for E. coli. Antioxidant and antibacterial activity tests appear bio-resource based ZnO-NPs from Allium cepa L. extract have effects on free radical and growth of microorganisms.Therefore, it could be a promising candidates for agricultural and food safety applications as an effective antimicrobial agent against pathogenic microorganisms and also can address future biomedical applications after complete in vivo study.

A Review on the Use of Metal Oxide-Based Nanocomposites for the Remediation of Organics-Contaminated Water via Photocatalysis: Fundamentals, Bibliometric Study and Recent Advances

The improper disposal of toxic and carcinogenic organic substances resulting from the manufacture of dyes, drugs and pesticides can contaminate aquatic environments and potable water resources and cause serious damage to animal and human health and to the ecosystem. In this sense, heterogeneous photocatalysis stand out as one effective and cost-effective water depollution technique. The use of metal oxide nanocomposites (MON), from the mixture of two or more oxides or between these oxides and other functional semiconductor materials, have gained increasing attention from researchers and industrial developers as a potential alternative to produce efficient and environmentally friendly photocatalysts for the remediation of water contamination by organic compounds. Thus, this work presents an updated review of the main advances in the use of metal oxide nanocomposites-based photocatalysts for decontamination of water polluted by these substances. A bibliometric analysis allowed to show the evolution of the importance of this research topic in the literature over the last decade. The results of the study also showed that hierarchical and heterogeneous nanostructures of metal oxides, as well as conducting polymers and carbon materials, currently stand out as the main materials for the synthesis of MON, with better photocatalysis performance in the degradation of dyes, pharmaceuticals and pesticides.

Photocatalytic Properties and Chemical Durability of CaO-B2O3-V2O5 Borovanadate Glasses

The aim of this paper is to investigate the photocatalytic properties and chemical durability of the CaO-B2O3-V2O5 glasses system. The latter were synthesized by the melt-quenching technique. The amorphous nature of the prepared borovanadate glasses has been confirmed with X-ray diffraction. The chemical durability measured from their weights before and after immersion in deionized water and hydrochloric acid indicated that replacing V2O5 with B2O3 improved the chemical durability. The observed increases in chemical durability might be explained by the increase in the glass transition temperature, due to stronger bonding in the structural network. The photocatalytic performance was assessed by the degradation of methylene blue (MB) dye under irradiation, and the evolution of dye degradation was analyzed by UV-visible spectrometry. The vanadium content in the glass, the amount of catalyst, and the initial dye concentration showed a variable effect on the degradation of the MB dye. The photodegradation of methylene blue by the photocatalysts was found to follow pseudo-first-order rate kinetics. The photocatalytic activity for all the prepared photocatalysts showed a higher degradation performance, and the results indicated that 40 CaO-30 B2O3-30 V2O5 has the highest removal efficiency of about 99% in 180 min.

Enhanced Photocatalytic Performance of Visible-Light-Driven BiVO4 Nanoparticles through W and Mo Substituting

Bismuth vanadate (BiVO4), W-doped BiVO4 (BiVO4:W), and Mo-doped BiVO4 (BiVO4:Mo) nanoparticles were synthesized at pH = 4 using a green hydrothermal method. The effects of 2 at% W or Mo doping on the microstructural and optical characteristics of as-prepared BiVO4 nanoparticles and the effect of combining particle morphology modification and impurity dopant incorporation on the visible-light-derived photocatalytic degradation of dilute Rhodamine B (RhB) solution are studied. XRD examination revealed that these obtained BiVO4-based nanoparticles had a highly crystalline and single monoclinic phase. SEM and TEM observations showed that impurity doping could modify the surface morphology, change the particle shape, and reduce the particle diameter to enlarge their specific surface area, increasing the reactive sites of the photocatalytic process. XPS and FL measurements indicated that W- and Mo-doped nanoparticles possessed higher concentrations of oxygen vacancies, which could promote the n-type semiconductor property. It was found that the BiVO4:W and BiVO4:Mo powder samples exhibited better photocatalytic activity for efficient RhB removal than that shown by pristine BiVO4 powder samples under visible light illumination. That feature can be ascribed to the larger surface area and improved concentration of photogenerated charge carriers of the former.

Carbon-Based Nanomaterials for Catalytic Wastewater Treatment: A Review

Carbon-based nanomaterials (CBM) have shown great potential for various environmental applications because of their physical and chemical properties. The unique hybridization properties of CBMs allow for the tailored manipulation of their structures and morphologies. However, owing to poor solar light absorption, and the rapid recombination of photogenerated electron-hole pairs, pristine carbon materials typically have unsatisfactory photocatalytic performances and practical applications. The main challenge in this field is the design of economical, environmentally friendly, and effective photocatalysts. Combining carbonaceous materials with carbonaceous semiconductors of different structures results in unique properties in carbon-based catalysts, which offers a promising approach to achieving efficient application. Here, we review the contribution of CBMs with different dimensions, to the catalytic removal of organic pollutants from wastewater by catalyzing the Fenton reaction and photocatalytic processes. This review, therefore, aims to provide an appropriate direction for empowering improvements in ongoing research work, which will boost future applications and contribute to overcoming the existing limitations in this field.

Facile Synthesis of Nano-Flower β-Bi2O3/TiO2 Heterojunction as Photocatalyst for Degradation RhB

Photocatalysis is a hopeful technology to solve various environmental problems, but it is still a technical task to produce large-scale photocatalysts in a simple and sustainable way. Here, nano-flower β-Bi₂O₃/TiO₂ composites were prepared via a facile solvothermal method, and the photocatalytic performances of β-Bi₂O₃/TiO₂ composites with different Bi/Ti molar ratios were studied. The nano-flower Bi₂O₃/TiO₂ composites were studied by SEM, XRD, XPS, BET, and PL. The PL result proved that the construction of staggered heterojunction enhanced the separation efficiency of carriers. The degradation RhB was applied to study the photocatalytic performances of prepared materials. The results showed that the degradation efficiency of RhB increased from 61.2% to 99.6% when the molar ratio of Bi/Ti was 2.1%. It is a mesoporous approach to enhance photocatalytic properties by forming heterojunction in Bi₂O₃/TiO₂ composites, which increases the separation efficiency of the generated carriers and improves photocatalytic properties. The photoactivity of the Bi₂O₃/TiO₂ has no evident changes after the fifth recovery, indicating that the Bi₂O₃/TiO₂ composite has distinguished stability.

Antibacterial Pathways in Transition Metal-Based Nanocomposites: A Mechanistic Overview

Across the planet, outbreaks of bacterial illnesses pose major health risks and raise concerns. Photodynamic, photothermal, and metal ion release effects of transition metal-based nanocomposites (TMNs) were recently shown to be highly effective in reducing bacterial resistance and upsurges in outbreaks. Surface plasmonic resonance, photonics, crystal structures, and optical properties of TMNs have been used to regulate metal ion release, produce oxidative stress, and generate heat for bactericidal applications. The superior properties of TMNs provide a chance to investigate and improve their antimicrobial actions, perhaps leading to therapeutic interventions. In this review, we discuss three alternative antibacterial strategies based on TMNs of photodynamic therapy, photothermal therapy, and metal ion release and their mechanistic actions. The scientific community has made significant efforts to address the safety, effectiveness, toxicity, and biocompatibility of these metallic nanostructures; significant achievements and trends have been highlighted in this review. The combination of therapies together has borne significant results to counter antimicrobial resistance (4-log reduction). These three antimicrobial pathways are separated into subcategories based on recent successes, highlighting potential needs and challenges in medical, environmental, and allied industries.

Augmenting the Photocatalytic Performance of Direct Z-Scheme Bi2O3/g-C3N4 Nanocomposite

Huge demands for photocatalytically efficient visible-light-induced catalysts have spurred widespread interest in building adaptable heterojunctions. Here, we used in situ thermal polymerization to synthesise the Z-scheme Bi2O3/g-C3N4 heterojunction. The optical, structural, chemical, compositional and photocatalytic behaviours of the samples were analysed through various analytical techniques and photocatalytic methylene blue (MB) dye degradation reaction. Among the various ratios of Bi2O3/g-C3N4 heterojunction composites, the 1:1 ratio showed improved visible-light-induced catalytic activity, which attained 91.2% degradation efficiency after 120 min of visible-light exposure. The dye degradation efficiency was calculated under various environmental conditions by varying the dye concentration, solution pH and catalyst dosage. A improved Z-scheme photocatalytic mechanism was proposed in light of the results. A potential mechanism was suggested to explain the photocatalytic activity, and trapping experiments supported it. Last but not least, this strategy might be helpful to prepare the heterojunction photocatalyst for the degradation of organic pigments.

Magnetron Sputtered Al Co-Doped with Zr-Fe2O3 Photoanode with Fortuitous Al2O3 Passivation Layer to Lower the Onset Potential for Photoelectrochemical Solar Water Splitting

In this paper, we investigate the magnetron sputtering deposition of an Al-layer on Zr-doped FeOOH (Zr-FeOOH) samples to fabricate a Zr/Al co-doped Fe2O3 (Al-Zr/HT) photoanode. An Al-layer is deposited onto Zr-FeOOH through magnetron sputtering and the thickness of the Al deposition is regulated by differing the sputtering time. Electrochemical impedance spectroscopy, intensity-modulated photocurrent spectroscopy, Mott-Schottky and time-resolved photoluminescence spectra analyses were used to study, in depth, the correlations between sputtered Al-layer thicknesses and PEC characteristics. High-temperature quenching (800 °C) assists in diffusing the Al3+ in the bulk of the Zr-doped Fe2O3 photoanode, whilst an unintended Al2O3 passivation layer forms on the surface. The optimized Al-Zr/HT photoelectrode achieved 0.945 mA/cm2 at 1.0 VRHE, which is 3-fold higher than that of the bare Zr/HT photoanode. The Al2O3 passivation layer causes a 100 mV cathodic shift in the onset potential. Al co-doping improved the donor density, thus reducing the electron transit time. In addition, the passivation effect of the Al2O3 layer ameliorated the surface charge transfer kinetics. The Al2O3 passivation layer suppressed the surface charge transfer resistance, consequently expediting the hole migration from photoanode to electrolyte. We believe that the thickness-controlled Al-layer sputtering approach could be applicable for various metal oxide photoanodes to lower the onset potential.

Magnetic TiO2/Fe3O4-Chitosan Beads: A Highly Efficient and Reusable Catalyst for Photo-Electro-Fenton Process

Heterogeneous photo-electro-Fenton process is an attractive technology for the removal of recalcitrant pollutants. To better exploit the presence of an irradiation source, a bifunctional catalyst with TiO2 nanoparticles embedded into an iron–chitosan matrix was developed. The catalytic activity of the catalyst was improved by the optimization of the loaded TiO2content. The prepared composite catalysts based on TiO2, Fe3O4 and chitosan were called TiO2/Fe3O4-CS beads. The best catalyst with an optimal ratio TiO2/Fe = 2 exhibited a high efficiency inthe degradation and mineralization of chlordimeform (CDM) insecticide. Under the optimum conditions (concentration of catalyst equal to 1 g L−1 and applied current intensity equal to 70 mA), a real effluent doped with 30 mg L−1 of CDM was efficiently treated, leading to 80.8 ± 1.9% TOC reduction after 6 h of treatment, with total removal of CDM after only 1 h.The generated carboxylic acids and minerals wereidentified and quantified. Furthermore, the stability and reusability of the developed catalyst was examined, and an insignificant reduction in catalytic activity was noticed forfour consecutive cycles of the photo-electro-Fenton process. Analyses using SEM, XRD and VSM showed a good stability of the physicochemical properties of the catalyst after use.