Impacts of microplastic-petroleum pollution on nutrient uptake, growth, and antioxidative activity of Chlorella vulgaris

Recent progress on the toxic effects of microplastics on Chlorella sp. in aquatic environments

Microplastics (MPs) are emerging contaminants that have harmful effects on ecosystems. Microalgae are important primary producers in aquatic environments, providing nutrients for various organisms. These microorganisms may be affected by MPs. Therefore, it is important to investigate the toxicity aspects of different MPs on Chlorella species. It can be seen that the BG-11 culture medium was the most commonly used medium in 40 % of the studies for the growth of Chlorella sp. Chlorella sp. grows optimally at a temperature of 25 °C and a pH of 7. Most studies show that Chlorella sp. can grow in the range of 3000-6000 lux. Moreover, various techniques have been used to analyze the morphological properties of MPs in different studies. These techniques included scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and transmission electron microscopy (TEM), which were used in 65 %, 35 %, and 27 % of the studies, respectively. 53 % of the research has focused on the toxic effects of PS on Chlorella sp. Findings show that 41 % of the studies investigated MPs concentrations in the range of 10-100 mg/L, followed by 32 % of the studies in the range of 100-1000 mg/L. The studies found that MPs were used in a spherical shape in 45 % of the cases. The enzymes most affected by MPs were superoxide dismutase (SOD) and Malondialdehyde (MDA), accounting for 48 % of the studies each. Additionally, exposure to MPs increased the activity of enzymes such as SOD and MDA. In general, it can be concluded that MPs had a relatively high negative effect on the growth of Chlorella sp.

Effects of environmental microplastic exposure on Chlorella sp. biofilm characteristics and its interaction with nitric oxide signaling

Microalgal biofilm is promising in simultaneous pollutants removal, CO2 fixation, and biomass resource transformation when wastewater is used as culturing medium. Nitric oxide (NO) often accumulates in microalgal cells under wastewater treatment relevant abiotic stresses such as nitrogen deficiency, heavy metals, and antibiotics. However, the influence of emerging contaminants such as microplastics (MPs) on microalgal intracellular NO is still unknown. Moreover, the investigated MPs concentrations among existing studies were mostly several magnitudes higher than in real wastewaters, which could offer limited guidance for the effects of MPs on microalgae at environment-relevant concentrations. Therefore, this study investigated three commonly observed MPs in wastewater at environment-relevant concentrations (10-10,000 μg/L) and explored their impacts on attached Chlorella sp. growth characteristics, nutrients removal, and anti-oxidative responses (including intracellular NO content). The nitrogen source NO3--N at 49 mg/L being 20 % of the nitrogen strength in classic BG-11 medium was selected for MPs exposure experiments because of least intracellular NO accumulation, so that disturbance of intracellular NO by nitrogen availability could be avoided. Under such condition, 10 μg/L polyethylene (PE) MPs displayed most significant microalgal growth inhibition comparing with polyvinyl chloride (PVC) and polyamide (PA) MPs, showing extraordinarily low chlorophyll a/b ratios, and highest superoxide dismutase (SOD) activity and intracellular NO content after 12 days of MPs exposure. PVC MPs exposed cultures displayed highest malonaldehyde (MDA) content because of the toxic characteristics of organochlorines, and most significant correlations of intracellular NO content with conventional anti-oxidative parameters of SOD, CAT (catalase), and MDA. MPs accelerated phosphorus removal, and the type rather than concentration of MPs displayed higher influences, following the trend of PE > PA > PVC. This study expanded the knowledge of microalgal biofilm under environment-relevant concentrations of MPs, and innovatively discovered the significance of intracellular NO as a more sensitive indicator than conventional anti-oxidative parameters under MPs exposure.

Influence of synthetic and natural microfibers on the growth, substance exchange, energy accumulation, and oxidative stress of field-collected microalgae compared with microplastic fragment

Synthetic microfibers (MFs), which are Microplastics (MPs), have not received attention commensurate with their abundance in the environment. Currently, limited studies on MFs have focused on their effects on marine organisms. It is therefore necessary to conduct exposure experiments of MFs on freshwater organisms to provide reference data for the ecological risk assessment of MFs. As a primary producer in freshwater ecosystems, microalgae have an ecological niche that is highly overlapping with that of MFs. In this study, we examined the effects of MFs on the growth of Chlorella and indicators of oxidative stress to examine their potential risk on the microalgae population. The results showed that inhibition rate of microalgae increased with MF concentration in the range of 0.01-100 mg/L. Compared with natural fibers such as cotton and wool, PET and PP fibers showed significant growth inhibition, but less so when in fragment form with the same material and concentration. PP and PET particles, whether fibers or fragments, increased the total antioxidant capacity of microalgal cells and caused oxidative damage. To determine the influence of MFs on the interaction of cells in the environment, the exchanged substances and accumulated energy of microalgae cells were also detected. The results indicated that PP and PET fibers, as well as fragments, increased the diameter and membrane permeability of microalgae cell, thus interfering with the cell division and substance exchange processes. PET fibers and fragments showed different interactions at the level of individual cells and populations. This suggests that the evaluation of MPs should consider examinations from cells to population and even community levels in the future.

Effects of polystyrene nanoplastics on growth and hemolysin production of microalgae Karlodinium veneficum

There are few studies on the effects of nanoplastics on growth and hemolysin production of harmful algal bloom species at present. In this study, Karlodinium veneficum was exposed to different concentrations (0, 5, 25, 50, 75 mg/L) of polystyrene nanoplastics (PS-NPs, 100 nm) for 96 h. The effects of PS-NPs on growth of K. veneficum were investigated by measuring algal cell abundance, growth inhibition rate (IR), total protein (TP), malondialdehyde (MDA), glutathione reductase (GSH), superoxide dismutase (SOD), ATPase activity (Na+/K+ ATPase and Ca2+/Mg2+ ATPase). Scanning electron microscope and transmission electron microscope (SEM and TEM) images of microalgae with or without nanoplastics were also observed. The effects of PS-NPs on hemolysin production of K. veneficum were studied by measuring the changes of hemolytic toxin production of K. veneficum exposed to PS-NPs on 1, 3, 5 and 7 days. High concentrations (50 and 75 mg/L) of PS-NPs seriously affected the growth of K. veneficum and different degrees of damage to cell morphology and ultrastructure were found. Excessive free radicals and other oxidants were produced in the cells, which disrupted the intracellular redox balance state and caused oxidative damage to the cells, and the basic activities such as photosynthesis and energy metabolism were weakened. The athletic ability of K. veneficum was decreased, but the ability to produce hemolysin was enhanced. It was suggested that the presence of nanoplastics in seawater may strengthen the threat of harmful algal bloom species to aquatic ecosystems and human health.

Ecotoxicity of micro- and nanoplastics on aquatic algae: Facts, challenges, and future opportunities

The production of plastic has exponentially increased in recent years, leading to the release of millions of tons of plastic waste into the environment annually. This waste can break down into smaller micro- and nanoplastics (MNPs) that are toxic and reactive to life forms, including humans. MNPs are particularly concerning for marine biologists and environmental scientists due to their toxic impacts on aquatic organisms, including algae, which are the foundation of the food chain. The review provides a comprehensive overview of the (eco)toxicity assessment of MNPs on aquatic algal communities, highlighting the novel insights gained into the ecotoxicity of various MNPs on algae and the associated health risks for aquatic ecosystems, food chains, and humans. This article also discusses current challenges and future research opportunities to address these challenges, making it a valuable contribution to the field of environmental science. Overall, this work is one of the first efforts to comprehensively assess the effects of MNPs on aquatic algae, emphasizing the significant risks that MNPs pose to essential ecosystems and human health.

Research advances on impacts micro/nanoplastics and their carried pollutants on algae in aquatic ecosystems: A review

The widespread presence of micro/nanoplastics in aquatic ecosystems has certainly affected ecosystem functions and food chains/webs. The impact is worsened by the accumulation of different pollutants and microorganisms on the surface of microplastics. At the tissue, cellular, and molecular levels, micro/nanoplastics and the contaminants they carry can cause damage to aquatic organisms. Problematically, the toxic mechanism of micro/nanoplastics and contaminants on aquatic organisms is still not fully understood. Algae are key organisms in the aquatic ecosystem, serving as primary producers. The investigation of the toxic effects and mechanisms of micro/nanoparticles and pollutants on algae can contribute to understanding the impact on the aquatic ecosystem. Micro/nanoplastics inhibit algal growth, reduce chlorophyll and photosynthesis, induce ultrastructural changes, and affect gene expression in algae. The effects of energy flow can alter the productivity of aquatic organisms. The type, particle size, and concentration of micro/nanoparticles can influence their toxic effects on algae. Although there has been some research on the toxic effects of algae, the limited information has led to a significant lack of understanding of the underlying mechanisms. This paper provides a comprehensive review of the interactions between micro/nanoplastics, pollutants, and algae. The effects of various factors on algal toxicity are also analyzed. In addition, this article discusses the combined effects of microplastics, global warming, and oil pollution on algae and aquatic ecosystems in the context of global change. This research is of great importance for predicting future environmental changes. This review offers a more comprehensive understanding of the interactions between microplastics/nanoplastics and algae, as well as their impact on the carbon cycle.

Extracellular polymeric substances altered the physicochemical properties of molybdenum disulfide nanomaterials to mitigate its toxicity to Chlorella vulgaris

Although the toxic effects of two-dimensional nanomaterials (2D-NMs) have been widely reported, the influence of extracellular polymeric substances (EPS) on the environmental fate and risk of 2D-NMs in aquatic environments is largely unknown, and the processes and mechanisms involved remain to be revealed. Herein, we investigated the impact of EPS secreted by microalgae (Chlorella vulgaris (C. vulgaris)) on the environmental transformation and risk of molybdenum disulfide (MoS2). We found that the attachment of EPS increased the thickness of MoS2 (from 2 nm to 5 nm), changed it from a monolayer sheet to a fuzzy multilayer structure, and promoted the formation of defects on MoS2. The blue-shift of the peak associated with the plasmon resonances in the 1 T phase and the generation of electron-hole pairs suggested that EPS altered the surface electronic structure of MoS2. EPS interacted mainly with the S atoms on the 1 T phase, and the attachment of EPS promoted the oxidation of MoS2. The reduction in hydrodynamic diameter (Dh) and the decrease in zeta potential indicated that EPS inhibited the agglomeration behavior of MoS2 and enhanced its dispersion and stability in aqueous media. Notably, EPS reduced the generation of free radicals (superoxide anion (•O2-), singlet oxygen (1O2), and hydroxyl radicals (•OH-)). Furthermore, EPS mitigated the toxicity of MoS2 to C. vulgaris, such as attenuated reduction in biomass and chlorophyll content. Compared to pristine MoS2, MoS2 + BG11 + EPS exhibited weaker oxidative stress, membrane damage and lipid peroxidation. The adsorption of EPS on MoS2 surface reduced the attachment sites of MoS2, making MoS2 less likely to be enriched on the cell surface. The findings have significant contribution for understanding the interactions between EPS and MoS2 in aquatic ecosystems, providing scientific guidance for risk assessment of 2D-NMs.

Heterogeneous aggregation between microplastics and microalgae: May provide new insights for microplastics removal

Existing studies have shown that microplastics (MPs) as artificial surfaces can be colonized by plankton microorganisms. However, systematic research on exploring the aggregation formation process of MPs and microalgae is still lacking and particularly the influencing factors of aggregation remain to be elucidated. Therefore, this study investigated the heterogeneous aggregation process between various microalgal species (i.e., Chlorella vulgaris, Scenedesmus obliquus, Tetraselmis subcordiformis, Chaetoceros müelleri and Streptococcus westermani) and MPs (i.e., mPS and mPLA) with different sizes (i.e., 74 μm and 613 μm), concentrations (i.e., 0.1 g/L, 1 g/L and 2 g/L) and shapes (i.e., the particle and sheet). The results showed that microalgae can first attach to the holes or protrusions of MPs and highly accumulate in the local region, and then multi-layer aggregation can be formed subsequently. The aggregation degree between MPs and microalgae was closely related to the MPs shape and size, and was less related to the MPs concentration. The aggregation speed of small-sized MPs (e.g., 74 μm) was faster than the large-sized ones (e.g., 613 μm). The MPs in a shape of sheet were more obvious than those in particle on their aggregation with microalgae. The density of aggregates was increased compared with pristine MPs, which is related to the cell density and cell number of attached microalgae. For the same type of MPs, the aggregation degree for the tested microalgae was as follows: Scenedesmus obliquus > C. vulgaris > T. subcordiformis > C. müelleri > S. westermani. Meanwhile, MPs inhibited cell growth of microalgae, particularly under the circumstance of their aggregation, by limiting the gas and mass transfer between microalgal cells and the extracellular environment. The heterogeneous aggregation of MPs and microalgae may provide new ideas for treatment and controlling of MPs in the environment.