Industrial development and applications of plant oils and their biobased oleochemicals

A comprehensive review on sustainable surfactants from CNSL: chemistry, key applications and research perspectives

Surfactants, a group of amphiphilic molecules (i.e. with hydrophobic(water insoluble) as well as hydrophilic(water soluble) properties) can modulate interfacial tension. Currently, the majority of surfactants depend on petrochemical feedstocks (such as oil and gas). However, deployment of these petrochemical surfactants produces high toxicity and also has poor biodegradability which can cause more environmental issues. To address these concerns, the current research is moving toward natural resources to produce sustainable surfactants. Among the available natural resources, Cashew Nut Shell Liquid (CNSL) is the preferred choice for industrial scenarios to meet their goals of sustainability. CNSL is an oil extracted from non-edible cashew nut shells, which doesn't affect the food supply chain. The unique structural properties and diverse range of use cases of CNSL are key to developing eco-friendly surfactants that replace petro-based surfactants. Against this backdrop, this article discusses various state-of-the-art developments in key cardanol-based surfactants such as anionic, cationic, non-ionic, and zwitterionic. In addition to this, the efficiency and characteristics of these surfactants are also analyzed and compared with those of the synthetic surfactants (petro-based). Furthermore, the present paper also focuses on various market aspects and different applications in various industries. Finally, this article describes various future research perspectives including Artificial Intelligence technology which, of late, is having a huge impact on society.

Synthesis and Performance of Bio-Based Amphoteric Surfactants

As the global surfactant market continues to expand, there is an increasing need to develop bio-based alternatives in the shift towards a circular economy. This study focuses on the synthesis of polar, amphoteric, amine-oxide surfactants starting from biomass-derived monosaccharides and demonstrating their potential in various applications. The synthesis involved a reductive amination of the sugars with an alkylamine and formaldehyde followed by oxidation to produce N-oxide surfactants. These bio-based surfactants exhibited promising properties, including high solubility, foamability, surface tension reduction, and critical micelle concentration. In particular, N-GalA1.10 and N-GalA1.12 showed comparable performance to commercial surfactants. Furthermore, these bio-based surfactants demonstrated significantly lower skin irritation potential when compared to petrochemical-derived counterparts like sodium laureth sulfate (SLES), making them potentially suitable for personal care products. The biodegradability assessment revealed that N-GalA1.12 exhibited good biodegradation, indicating its potential environmental compatibility. In conclusion, this study highlights the potential of bio-based N-oxide surfactants derived from monosaccharides as sustainable and skin-friendly alternatives to traditional amphoteric surfactants, like cocamidopropyl betaine (CAPB).

Revisiting the Potential of Group VI Inorganic Precatalysts for the Ethenolysis of Fatty Acids through a Mechanochemical Approach

The utilization of biobased feedstocks to prepare useful compounds is a pivotal trend in current chemical research. Among a varied portfolio of naturally available starting materials, fatty acids are abundant, versatile substrates with multiple applications. In this context, the ethenolysis of unsaturated fatty acid esters such as methyl oleate is an atom-economical way to prepare functional C10 olefins with a biobased footprint. Despite the existence of a variety of metathesis catalysts for the latter process, there is a lack of readily available, efficient, and inexpensive catalytic systems based on earth-abundant metals (Mo, W) whose preparation does not require sophisticated syntheses and manipulations. Here, a systematic exploration of homogeneous and heterogeneous inorganic Mo, W (oxy)halides shows that MoOCl4, while inactive as a homogeneous species, forms active and selective silica-supported ethenolysis precatalysts able to reach equilibrium conversion of methyl oleate within a few minutes upon activation with SnMe4. Such heterogeneous MoOCl4-based precatalysts were easily accessed through mechanochemical solvent-free procedures and found to contain, upon characterization by elemental analysis and Raman spectroscopy, isolated (≡SiO)Mo(=O)Cl3 units or polymeric silica-supported [-O(≡SiO)nMoCl4-nO-]m (n = 1, 2) complexes depending on the molybdenum loading. The former isolated species exhibited a higher catalytic performance. The developed heterogeneous precatalysts could be applied to the ethenolysis of various substrates, including polyunsaturated fatty acid esters and industrial fatty acid methyl ester (FAME) mixtures from palm oil transesterification.

Efficient Process for the Production of Alkyl Esters

This article reports a scalable process development for the production of alkyl esters through the esterification route by utilizing fly ash as a catalyst. The catalyst consisting of mixed oxides such as alumina, iron oxide, calcium oxide, magnesium oxide, and silica was employed for the esterification reaction without modification. The catalyst was evaluated for the conversion of feedstock containing variable amounts of free fatty acids, mono/dibasic acid, and alcohol/polyols into the corresponding alkyl esters. Three types of fly ash catalysts, viz., FS-1, FP-1, and FC-1, were chosen from three different industrial sources. Synthesis of dimethyl adipate was studied as a model reaction. FS-1 fly ash gave the highest yield of dimethyl adipate, whereas FC-1 gave a low yield of dimethyl adipate. The recyclability of FS-1 was evaluated for three cycles, and no loss of yield was observed. Furthermore, the catalyst FS-I was found to be capable of producing good yields for various esterification reactions with different substrates.

A bibliometric analysis on the tribological and physicochemical properties of vegetable oil-based bio-lubricants (2010-2021)

Vegetable oil-based bio-lubricants possess potential as an alternative to mineral oil-based lubricants due to their biodegradability and renewability. However, a detailed examination of the publication focus, trend, and future direction related to these bio-lubricants' tribological and physicochemical properties is scarce. Therefore, the study presents a bibliometric analysis of vegetable oil-based bio-lubricant. One hundred sixty-five publications were extracted from Web of Science (WoS) from 2010 to 2021. During this period, the total citation was 2,240, recording an average citation per publication of 13.58. Proceedings of The Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology was the top productive journal, publishing 10.3% of the publications selected on the studied topic. From 2010 to 2021, India was the most productive country working on bio-lubricants due to its abundance of coconut products, followed by Malaysia due to its abundance of palm products. The keyword analysis indicated that a significant amount of work emphasised the derivation of bio-lubricants with an increasing shift towards tribological performance characterisation. From the analysis, palm is the most studied bio-lubricant, followed by castor oil. The reported viscosity and viscosity index values cover an extensive range, allowing these bio-lubricants to be adopted for a wide range of applications. For different vegetable oil-based bio-lubricants, the coefficient of friction is reported from 0.001 to 0.78, with the wear scar diameter being reported from 0.075 μm to 4.59 mm. Even though these bio-lubricants' friction and wear performances can be tabulated, the dataset is still unreliable for lubricant-selection purposes because of the varying test conditions. Such a scenario also limits the ability to correlate the role of fatty acid composition in the vegetable oil-based bio-lubricants in fulfilling their various application-specific potentials. Therefore, this study recommends that a unified correlation between the fatty acid composition and its tribological performance be attained consistently to better elucidate the potential of vegetable oil-based bio-lubricants.

Ecotoxicological impacts caused by high demand surfactants in Latin America and a technological and innovative perspective for their substitution

Nowadays, water pollution represents a great concern due to population growth, industrialization, and urbanization. Every day hazardous chemical products for humans and aquatic organisms are disposed of arbitrarily from homes and industries. Even though detergents are considered an essential market, there is evidence of environmental impacts caused by surfactants like nonylphenol ethoxylate (NPE) and linear alkylbenzene sulfonates (LAS). Regulations about maximum allowable concentrations in sewage, surface water, and drinking water are scarce or null, mostly in developing countries like Latin American countries. Therefore, this review explores these two common toxic surfactants (NPE and LAS) and proposes a technological, innovative, and ecological perspective on detergents. Also, it establishes a starting point for industries to minimize adverse effects on humans and environmental health caused by these compounds.

Aquivion perfluorosulfonic superacid as an effective catalyst for selective epoxidation of vegetable oils

The acid-promoted epoxidation of vegetable oils was studied using a variety of acidic ion exchange resins as heterogeneous acid catalysts. Quantitative and selective epoxidation of a series of vegetable oils with different composition of saturated, mono-, di- and tri-unsaturated fatty acids was obtained upon identification of the more efficient catalyst and experimental conditions. Furthermore, optimized reaction conditions were successfully applied to the epoxidation of a waste cooking oil, thus extending our procedure to the valorization of a biowaste, an area of increasing importance within a more sustainable society. The use of quantitative ¹HNMR besides making accurate evaluation of the amounts of reagents to be employed and of the selectivity, allowed facile and rapid quantification of mono-, di- and tri-epoxides, thus providing an indirect indication on the fatty acid composition of the vegetable oils, even in the presence of very low quantities of linolenic acid.

Lab-scale photobioreactor systems: principles, applications, and scalability

Phototrophic microorganisms that convert carbon dioxide are being explored for their capacity to solve different environmental issues and produce bioactive compounds for human therapeutics and as food additives. Full-scale phototrophic cultivation of microalgae and cyanobacteria can be done in open ponds or closed photobioreactor systems, which have a broad range of volumes. This review focuses on laboratory-scale photobioreactors and their different designs. Illuminated microtiter plates and microfluidic devices offer an option for automated high-throughput studies with microalgae. Illuminated shake flasks are used for simple uncontrolled batch studies. The application of illuminated bubble column reactors strongly emphasizes homogenous gas distribution, while illuminated flat plate bioreactors offer high and uniform light input. Illuminated stirred-tank bioreactors facilitate the application of very well-defined reaction conditions. Closed tubular photobioreactors as well as open photobioreactors like small-scale raceway ponds and thin-layer cascades are applied as scale-down models of the respective large-scale bioreactors. A few other less common designs such as illuminated plastic bags or aquarium tanks are also used mainly because of their relatively low cost, but up-scaling of these designs is challenging with additional light-driven issues. Finally, this review covers recommendations on the criteria for photobioreactor selection and operation while up-scaling of phototrophic bioprocesses with microalgae or cyanobacteria.

Yield Variability in Oil Palm Plantations in Tropical India Is Influenced by Surface and Sub-Surface Soil Fertility and Leaf Mineral Nutrient Contents

Oil palm (Elaeis guineensis Jacq.), an industrial oilseed crop, is the most prominent oil-producing crop in the world and one of the highest dry matter producers among C3 plants. It removes large amounts of soil nutrients to support its substantial biomass and oil production. Thus, maintaining adequate levels of limiting nutrients at favorable ratios in the soil is crucial to sustain the required palm nutritional status and oil production over extended periods. We evaluated the levels and ratios of the available soil and leaf nutrients in high-yielding (HYOPP) and low-yielding (LYOPP) oil palm plantations from two locations in southern India and assessed their relations to develop effective nutrient management for sustaining fresh fruit bunch (FFB) production. The FFB yield varied from 2.00 to 31.0 t ha−1 (location 1) and 6.84 to 30.9 t ha−1 (location 2), and the FFB yields of the high- and low-yield population at each location differed significantly. Wide ranges of soil properties, available nutrients, and leaf nutrients concentrations were observed at 0–20- and 20–40-cm soil depths at both locations. The soil nutrient ratios at both sampling depths of the HYOPP were significantly different than the LYOPP at location 1. The mean leaf N (2.09%) and K (0.68%) concentrations at location 2 were significantly higher than those in location 1 (1.85% and 0.54, respectively). The mean leaf concentrations at both locations followed the order N (1.85%, 2.09%) > Ca (1.65%, 1.36%) > K (0.54%, 0.68%) > Mg (0.49%, 0.47%) > S (0.16%, 0.18) > P (0.11%, 0.12%) > B (35.8 mg kg−1, 27.5 mg kg−1). We observed positive and significant correlations between the available N and P at 0–20 cm and between the available N and K as well as Ca and S at both soil depths for HYOPPs. In LYOPPs, the available N was significantly correlated with the available P, K, Ca, and Mg at both soil depths and with the available S at 0–20 cm. The FFB yield of LYOPPs was positively and significantly correlated with the available P and S at the 0–20-cm soil depth and with the available N and P at the 20–40-cm soil depth. Except for a negative correlation (p < 0.05) with exchangeable Ca at the 20–40-cm soil depth, the FFB yield in HYOPPs had no significant correlation with the available soil nutrients at both depths. The FFB yield of LYOPPs had a positive significant (p < 0.01) correlation with the leaf P and K concentrations, while the yield of HYOPPs had a negative correlation (p < 0.01) with the leaf P. Fertilizer accounts for a large part of the on-farm cost in oil palm plantations, and an evidenced approach for fertilizer management based on nutrient contents and ratios in the soil and in the plant is useful for sustainable and profitable production of palm oil.

Impact of Malaysian palm oil on sustainable development goals: co-benefits and trade-offs across mitigation strategies

Palm oil (PO) is an important source of livelihood, but unsustainable practices and widespread consumption may threaten human and planetary health. We reviewed 234 articles and summarized evidence on the impact of PO on health, social and economic aspects, environment, and biodiversity in the Malaysian context, and discuss mitigation strategies based on the sustainable development goals (SDGs). The evidence on health impact of PO is equivocal, with knowledge gaps on whether moderate consumption elevates risk for chronic diseases, but the benefits of phytonutrients (SDG2) and sensory characteristics of PO seem offset by its high proportion of saturated fat (SDG3). While PO contributes to economic growth (SDG9, 12), poverty alleviation (SDG1, 8, 10), enhanced food security (SDG2), alternative energy (SDG9), and long-term employment opportunities (SDG1), human rights issues and inequities attributed to PO production persist (SDG8). Environmental impacts arise through large-scale expansion of monoculture plantations associated with increased greenhouse gas emissions (SDG13), especially from converted carbon-rich peat lands, which can cause forest fires and annual trans-boundary haze; changes in microclimate properties and soil nutrient content (SDG6, 13); increased sedimentation and change of hydrological properties of streams near slopes (SDG6); and increased human wildlife conflicts, increase of invasive species occurrence, and reduced biodiversity (SDG14, 15). Practices such as biological pest control, circular waste management, multi-cropping and certification may mitigate negative impacts on environmental SDGs, without hampering progress of socioeconomic SDGs. While strategies focusing on improving practices within and surrounding plantations offer co-benefits for socioeconomic, environment and biodiversity-related SDGs, several challenges in achieving scalable solutions must be addressed to ensure holistic sustainability of PO in Malaysia for various stakeholders.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s11625-021-01052-4.

Biolubricant Production through Double Transesterification: Reactor Design for the Implementation of a Biorefinery Based on Rapeseed

The production and use of biolubricants as replacements for mineral lubricants align with the promotion of sustainable development goals, contributing to the sustainable economic growth of developing countries as well as the preservation of the environment. The implementation of biorefineries (where the production of biolubricants through transesterification could play an important role) is becoming important for these purposes, using natural feedstocks such as rapeseed, which is an interesting crop that can adapt to different climates under extreme weather conditions. The aim of this research work was to study the design of a reactor to produce rapeseed biolubricant through double transesterification of the corresponding vegetable oil. Thus, the kinetics to design a reactor was studied, sizing it according to the properties of the biolubricant and the demand in Spain. As a result, a SAE 10W30 biolubricant was obtained, which was suitable for Diesel engines. A batch reactor was selected for the production of this biolubricant at a national level, with a pseudo-first reaction order and a reactor volume of 9.66 m3.

Catalytic upgrade for pyrolysis of food waste in a bubbling fluidized-bed reactor

Biofuel production via pyrolysis has received increasing interest as a promising solution for utilization of now wasted food residue. In this study, the fast pyrolysis of mixed food waste (MFW) was performed in a bubbling fluidized-bed reactor. This was done under different operating conditions (reaction temperatures and carrier gas flow rate) that influence product distribution and bio-oil composition. The highest liquid yield (49.05 wt%) was observed at a pyrolysis temperature of 475 °C. It was also found that the quality of pyrolysis bio-oils (POs) could be improved using catalysts. The catalytic fast pyrolysis of MFW was studied to upgrade the pyrolysis vapor, using dolomite, red mud, and HZSM-5. The higher heating values (HHVs) of the catalytic pyrolysis bio-oils (CPOs) ranged between 30.47 and 35.69 MJ/kg, which are higher than the HHVs of non-catalytic pyrolysis bio-oils (27.69-31.58 MJ/kg). The major components of the bio-oils were fatty acids, N-containing compounds, and derivatives of phenol. The selectivity for bio-oil components varied depending on the catalysts. In the presence of the catalysts, the oxygen was removed from oxygenates via moisture, CO₂, and CO. The CPOs contained aliphatic hydrocarbons, polycyclic aromatic compounds (such as naphthalene), pyridine derivatives, and light oxygenates (cyclic alkenes and ketones).

An acceleration of microwave-assisted transesterification of palm oil-based methyl ester into trimethylolpropane ester

Microwave-assisted synthesis is known to accelerate the transesterification process and address the issues associated with the conventional thermal process, such as the processing time and the energy input requirement. Herein, the effect of microwave irradiation on the transesterification of palm oil methyl ester (PME) with trimethylolpropane (TMP) was evaluated. The reaction system was investigated through five process parameters, which were reaction temperature, catalyst, time, molar ratio of TMP to PME and vacuum pressure. The yield of TMP triester at 66.9 wt.% and undesirable fatty soap at 17.4% were obtained at 130 °C, 10 mbar, sodium methoxide solution at 0.6 wt.%, 10 min reaction time and molar ratio of TMP to PME at 1:4. The transesterification of palm oil-based methyl ester to trimethylolpropane ester was 3.1 folds faster in the presence of microwave irradiation. The total energy requirement was markedly reduced as compared to the conventional heating method. The findings indicate that microwave-assisted transesterification could probably be an answer to the quest for a cheaper biodegradable biolubricant.

Oleochemistry potential from Brazil northeastern exotic plants

Caatinga is a Brazilian semi-arid ecosystem that stands out for presenting unique environmental characteristics with a dry, spiny and deciduous shrub/forest vegetation with several species that can be renewable oil sources with potential applicability in oleochemical and nutrition. Caatinga oilseeds have a high content of unsaturated fatty acids, phytosterols and sterols, and this composition is related to its nutritional potential. The present review summarizes the knowledge on the oil contents and fatty acid profiles of seeds from six representatives caatinga species. It was observed that plants species like Caju (Anacardium occidentale L.), Favela (Cnidoscolus quercifolius Pohl), Licuri (Syagrus coronata (Mart.) Becc.), Pinhão-bravo (Jatropha mollissima Pohl Baill), Pequi (Caryocar brasiliense Camb) and Oiticica (Licania rígida Benth) contains approximately 33.1, 33.5, 49.2, 18.3, 70.16 and 57.0% w/w of oil, respectively, on a dry weight basis. Their fatty acid profiles are mostly saturated for Licuri oil, with a high content of lauric acid (up to 40%) and unsaturated for Favela, Pinhão-bravo, Cashew nut, Pequi and Oiticica oils. Oiticica oil shows a high concentration of unusual conjugated polyunsaturated fatty acids, like α-Eleostearic and Licanic acid with 16.90 and 43.20% w/w, respectively.

Lipidome, nutraceuticals and nutritional profiling of Pyrus pashia Buch.-ham ex D. Don (Kainth) seeds oil and its antioxidant potential

Kainth fruit, as traditional medicine, has been used in the Himalayan region for its health-promoting properties. However, the phytochemicals and lipidomes of Kainth Seed Oil (KSO) are still scarce. Here, we investigated the physicochemical characterization of KSO and its nutraceuticals, antioxidant potentials. Kainth seeds contain 19-20% oil rich in polyunsaturated fatty acids (PUFA, 82.22%), particularly linoleic acid (C18:2). Lipidome analysis of KSO using high-resolution mass spectrometry showed that trilinoleate (C54:6) was the dominant triacylglycerol (TAG) species. Further, the characteristics of PUFA-rich oil were validated by Fourier transforms infrared spectroscopy (FTIR) and Differential Scanning calorimetry (DSC). The nutraceuticals profiling of KSO depicted the presence of tocopherols (86.72 mg) and phytosterols (32.25 mg) in 100 g oil with significant antioxidant activity. The oil cake contained 19.09% protein and minerals and can be a source for dietary protein. Collectively these results suggest that KSO will be a suitable source for PUFA and nutraceuticals potential.

Application of Activated Carbon to Obtain Biodiesel from Vegetable Oils

The methanolysis of refined vegetable oils (rapeseed oil, sunflower oil, corn oil and olive oil) using a heterogeneous carbonaceous catalyst was studied. Activated carbon (AC) was prepared from beech tree wood and used as the support for KOH and a lipase catalyst. The reactions were carried out for 1–4 h at 60 °C with a methanol-to-oil molar ratio of 6:1 and 0.5–1.5 wt.% KOH/AC. In contrast, the biotransformation of vegetable oils was carried out for 24 h at 40 °C with an alcohol-to-oil molar ratio of 4:1 and 5 wt.% lipase/AC. The highest methanolysis yield (99%) for the fatty acid methyl esters was obtained for lipase/AC. These data show that activated carbon is a promising supporter for KOH as well as for lipase in the transesterification reaction of vegetable oils with methanol. The use of both catalysts in the transesterification reaction may improve biodiesel production. The lipase/AC enables the reduction in methanol excess and eliminates waste formation, whereas the saponification of triglycerides is scanty when KOH/AC is used.

Metabolic traits specific for lipid-overproducing strain of Mucor circinelloides WJ11 identified by genome-scale modeling approach

The genome-scale metabolic model of a lipid-overproducing strain of Mucor circinelloides WJ11 was developed. The model (iNI1159) contained 1,159 genes, 648 EC numbers, 1,537 metabolites, and 1,355 metabolic reactions, which were localized in different compartments of the cell. Using flux balance analysis (FBA), the iNI1159 model was validated by predicting the specific growth rate. The metabolic traits investigated by phenotypic phase plane analysis (PhPP) showed a relationship between the nutrient uptake rate, cell growth, and the triacylglycerol production rate, demonstrating the strength of the model. A putative set of metabolic reactions affecting the lipid-accumulation process was identified when the metabolic flux distributions under nitrogen-limited conditions were altered by performing fast flux variability analysis (fastFVA) and relative flux change. Comparative analysis of the metabolic models of the lipid-overproducing strain WJ11 (iNI1159) and the reference strain CBS277.49 (iWV1213) using both fastFVA and coordinate hit-and-run with rounding (CHRR) showed that the flux distributions between these two models were significantly different. Notably, a higher flux distribution through lipid metabolisms such as lanosterol, zymosterol, glycerolipid and fatty acids biosynthesis in iNI1159 was observed, leading to an increased lipid production when compared to iWV1213. In contrast, iWV1213 exhibited a higher flux distribution across carbohydrate and amino acid metabolisms and thus generated a high flux for biomass production. This study demonstrated that iNI1159 is an effective predictive tool for the pathway engineering of oleaginous strains for the production of diversified oleochemicals with industrial relevance.

A New Class of Pure Estrogen Alpha Receptor Antagonists; Design, Synthesis and in-vitro Screening

Background:

In view of the estrogenic receptor inhibitory properties of coumarin nucleus, long chain nature of fatty acid and anti-breast cancer activity of fatty acids, it was proposed to attach long chain fatty acids at 3rd,4th and 7th position of coumarin nucleus and evaluate for their anti-breast cancer activity through suitable in-vitro methods.

Methods:

The present study focuses a library of fatty acid coumarin conjugates as ligands to the ligand-binding domain of the human estrogen receptor α (PDB ID 2IOG) and their binding affinities using GLIDE module of Schrodinger after ascertaining their drug-likeness with QIKPROP. The compounds LNAC 8, SAC 1 and OAC 5 are the best hits based on their docking scores as well as the Prime MM-GBSA free energy of binding. Based on the in-silico results and synthetic feasibility the compounds SAC 1 PAC 1 and OAC 1 are synthesized, characterized and investigated for their time interval growth inhibitory effect on MCF-7 which is an ER positive breast cancer cell lines.

Results:

SAC 1, showed better in vitro growth inhibitory effect in sub micromolar range as compared to Tamoxifen, a standard estrogen receptor modulator.

Conclusion:

Conclusively, in silico molecular docking studies have been very useful in predicting the pharmacokinetic profiles and the binding affinities of new hits before a detailed preclinical and clinical evaluation.

Seed-specific RNAi in safflower generates a superhigh oleic oil with extended oxidative stability

Vegetable oils extracted from oilseeds are an important component of foods, but are also used in a range of high value oleochemical applications. Despite being biodegradable, nontoxic and renewable current plant oils suffer from the presence of residual polyunsaturated fatty acids that are prone to free radical formation that limit their oxidative stability, and consequently shelf life and functionality. Many decades of plant breeding have been successful in raising the oleic content to ~90%, but have come at the expense of overall field performance, including poor yields. Here, we engineer superhigh oleic (SHO) safflower producing a seed oil with 93% oleic generated from seed produced in multisite field trials spanning five generations. SHO safflower oil is the result of seed-specific hairpin-based RNA interference of two safflower lipid biosynthetic genes, FAD2.2 and FATB, producing seed oil containing less than 1.5% polyunsaturates and only 4% saturates but with no impact on lipid profiles of leaves and roots. Transgenic SHO events were compared to non-GM safflower in multisite trial plots with a wide range of growing season conditions, which showed no evidence of impact on seed yield. The oxidative stability of the field-grown SHO oil produced from various sites was 50 h at 110°C compared to 13 h for conventional ~80% oleic safflower oils. SHO safflower produces a uniquely stable vegetable oil across different field conditions that can provide the scale of production that is required for meeting the global demands for high stability oils in food and the oleochemical industry.

Phyto-metabolites; An Impregnable Shield against Plant Viruses

Worldwide, economically important crops are under continuous threat from plant viruses as they reproduce within the host and spread via various biological and non biological means. The problem can be minimized via application of integrated management approaches involving utilization of resistant genotypes and reducing the insect vector population. But such strategies are rarely applied in developing countries and farmers prefer to use chemicals against all type of diseases. But increasing use of pesticides is a leading cause of disaster to our ecosystem so alternative means such as phyto-metabolites should be explored for eco friendly management of plant viruses. So here we have reviewed about different phyto-metabolites that can be effectively and potentially used against various plant virus diseases. We further explained about the various primary and secondary metabolites such as alkaloids, essential oils, flavonoids, polysaccharides and proteins. The review highlights the recent advances in the field of phyto-metabolites utilization against plant viruses and sums up via hoping through prospects that future drugs will be safer for human beings and our ecosystem.

Synthesis of Novel Fatty Substituted 4-methyl-2HChromen-2-one via Cross Metathesis: Potential Antioxidants and Chemotherapeutic Agents

A series of novel fatty substituted 4-methyl-2H-chromen-2-one (coumarins) were synthesized by employing cross metathesis, a key step in the synthesis. The antioxidant activities of the title compounds were compared with the commercial antioxidants, namely butylated hydroxy toluene (BHT) and α-tocopherol, glycosidic and other substituted 4-methyl-2H-chromen-2-ones. Among the different 4-methyl-2H-chromen-2-ones, the glycosidic substituted 4-methyl-2H-chromen-2-ones was excellent, while those with aliphatic fatty acid chain and hydroxyl substitutents were good. Among the substituted 4-methyl-2H-chromen-2-ones, glycosidic, hydroxyl and cyano containing 4-methyl-2H-chromen-2-ones exhibited good, while fatty substituted exhibited moderate anticancer activities against the four different cancer cell lines tested, namely DU145 (Prostate carcinoma cancer cell), HepG2 (Hepato cellular carcinoma cancer cell), SKOV3 (Ovarian cancer cell) and MDA-MB 231 (Human breast cancer cell). The study reveals that these substituted coumarins can be potential candidates in a number of food and pharmaceutical formulations.