Chemical modification of cellulose extracted from sugarcane bagasse: Preparation of hydroxyethyl cellulose

Characterization of cellulose nanocrystals from Zhombwe (Neorautanenia brachypus (harms) CA Sm.) bagasse

Increased awareness of environmental pollution has changed focus to the use of biodegradable materials because they lack persistence in the environment. This article focused on the production of cellulose nanocrystals from Zhombwe, Neorautanenia brachypus (Harms) CA Sm. bagasse using steam explosion, alkaline treatment, bleaching, purification, and acid hydrolysis. The chemical composition after the treatments was determined using TAPPI standards. Further characterization was done using x-ray Diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The nanoscale dimensions and morphology of the extracted nanocrystals was determined through field emission scanning electron microscopy (FE-SEM). FTIR spectroscopy and DSC confirmed the removal of noncellulosic compounds. XRD revealed that N. brachypus bagasse contained cellulose type I, which partly endured morphological change to polymorph II after purification and hydrolysis. FE-SEM revealed elliptical to rod-shaped structures after acid hydrolysis, which had a mean length and width of 1103 nm and 597 nm respectively. TAPPI tests revealed that successive chemical treatments increased crystallinity by 29.7%, enriched cellulose content by 74.2%, reduced lignin content by 21.7%, and reduced hemicellulose to less than 1%. The semicrystalline nature of the material produced in our work is a promising candidate for swelling hydrogel applications in areas such as wound dressing, heavy metal removal, controlled drug delivery, agriculture, and sanitary products. Future studies may focus on surface modification of nanocrystals to improve their thermal stability and therefore expand their range for potential industrial applications.

Sustainable production of cellulosic biopolymers for enhanced smart food packaging: An up-to-date review

Biodegradable and sustainable food packaging (FP) materials have gained immense global importance to reduce plastic pollution and environmental impact. Therefore, this review focused on the recent advances in biopolymers based on cellulose derivatives for FP applications. Cellulose, an abundant and renewable biopolymer, and its various derivatives, namely cellulose acetate, cellulose sulphate, nanocellulose, carboxymethyl cellulose, and methylcellulose, are explored as promising substitutes for conventional plastic in FP. These reviews focused on the production, modification processes, and properties of cellulose derivatives and highlighted their potential for their application in FP. Finally, we reviewed the effects of incorporating cellulose derivatives into film in various aspects of packaging properties, including barrier, mechanical, thermal, preservation aspects, antimicrobial, and antioxidant properties. Overall, the findings suggest that cellulose derivatives have the potential to replace conventional plastics in food packaging applications. This can contribute to reducing plastic pollution and lessening the environmental impact of food packaging materials. The review likely provides insights into the current state of research and development in this field and underscores the significance of sustainable food packaging solutions.

Barnacle analysis as a microplastic pollution bioindicator on the East Coast of Surabaya

Background

Plastic pollution is a significant issue on the East Coast of Surabaya, emphasizing the need to develop microplastic monitoring programs. Barnacles became one of the potential microplastic bioindicator species on the East Coast of Surabaya. This study aimed to characterize the visual and polymers of microplastics found in barnacles and assess their potential as a bioindicator species for microplastic pollution on the East Coast of Surabaya.

Methods

Microplastic polymer analysis was performed using ATR-FTIR.

Results

A total of 196 microplastic particles were found in barnacles, water, and sediment. The size of microplastics in barnacles, water, and sediment varied, with the size in barnacles dominated by class 1 (1-10 µm), in water by class 2 (10-50 µm), and in sediments by class 3 (50-100 µm). Fragments dominated the shape of microplastics in barnacles, while water and sediment were dominated by fiber. The microplastic color in barnacles, water, and sediment was dominated by blue, and the microplastic polymer composition on barnacles, water, and sediments was dominated by cellophane (36%). Amphibalanus amphitrite was found to be predominant and identified as a potential microplastic bioindicator because it is a cosmopolitan species. Its population was found to correlate positively with cellophane (CP) accumulation. The Pearson's correlation test between barnacle length and microplastic length at a = 0.05 was inversely proportional to r =  - 0.411 (p < 0.05), categorized as a strong enough correlation. These findings are essential in developing monitoring programs and mitigating the impact of microplastics on the marine environment.

Development of nanocellulose hydrogels for application in the food and biomedical industries: A review

As the most abundant and renewable natural resource, cellulose has attracted significant attention and research interest for the production of hydrogels (HGs). To address environmental issues and emerging demands, the benefits of naturally produced HGs include excellent mechanical properties and superior biocompatibility. HGs are three-dimensional networks created by chemical or physical cross-linking of linear or branched hydrophilic polymers and have high capacity for absorption of water and biological fluids. Although widely used in the food and biomedical fields, most HGs are not biodegradable. Nanocellulose hydrogels (NC-HGs) have been extensively applied in the food industry for detection of freshness, chemical additives, and substitutes, as well as the biomedical field for use as bioengineering scaffolds and drug delivery systems owing to structural interchangeability and stimuli-responsive properties. In this review article, the sources, structures, and preparation methods of NC-HGs are described, applications in the food and biomedical industries are summarized, and current limitations and future trends are discussed.

Cellulose cryogels from herbal residues for oily wastewater purification

Recycling herbal residues for oily wastewater purification is a potential way to use the wastes to treat wastes. Cellulose extracted from herbal residues is a fine material for cryogel fabrication. However, the cellulose cryogels were not suitable for oily wastewater treatment due to their amphiphilicity. To address this issue, the cryogels were modified with methyltrimethoxysilane (MTMS), which made them hydrophobic and reduced their surface energy. In this study, the herbal residues (Ficus microcarpa L. f) were used in cryogel preparation for the first time. The cryogels exhibit super lightweight and low density. The modified cryogels show excellent sorption capacity for free oils, especially silicone oil (51.22 g/g), and outperformed some recent sorbents. They also effectively separated water-in-toluene emulsion stabilized by Span 80, with a separation efficiency of 98.57 % and a flux of 1474.67 L/m2h. This study demonstrated a novel application of waste herbal residues in the field of environmental remediation.

Structural diversity, functional versatility and applications in industrial, environmental and biomedical sciences of polysaccharides and its derivatives - A review

Recent efforts on the expansion of sustainable and commercial primal matters are essential to enhance the knowledge of their hazards and noxiousness to humans and their environments. For example, polysaccharide materials are widely utilized in food, wound dressing, tissue engineering, industry, targeted drug delivery, environmental, and bioremediation due to their attractive degradability, nontoxicity and biocompatibility. There are numerous easy, quick, and efficient ways to manufacture these materials that include cellulose, starch, chitosan, chitin, dextran, pectin, gums, and pullulan. Further, they exhibit distinctive properties when combined favourably with raw materials from other sources. This review discusses the synthesis and novel applications of these carbohydrate polymers in industrial, environmental and biomedical sciences.

Facile production of cellulose nanofibers from raw elephant grass by an aluminum chloride-enhanced acidic deep eutectic solvent

To develop a greener and more efficient method for producing cellulose nanofibers (CNFs) from raw plants, an AlCl3-enhanced ternary deep eutectic solvent, DES2 (consisting of choline chloride, citric acid, and AlCl3·6H2O in a molar ratio of 1:0.4:0.08), was synthesized. Raw elephant grass (EG) was pretreated with DES2, followed by sodium chlorite (NaClO2) bleaching and ultrasonic disruption to extract high-performance CNFs. The DES2 and NaClO2 treatments effectively removed hemicellulose and lignin, achieving removal rates of 99.23 % and 99.62 %, respectively, while maintaining a cellulose content of 78.3 %. DES2 demonstrated easy recyclability and maintained excellent biomass pretreatment performance even after multiple cycles. Following a brief 30-min intermittent ultrasound treatment, the resulting CNFs demonstrated superior crystallinity, increased carboxyl content, and a narrower width distribution compared to CNFs obtained from AlCl3-free DES1. Optimized conditions at 110 °C yielded CNFs with 85.3 % crystallinity, 0.64 mmol/g carboxyl content, 5.15 nm width distribution, and excellent dispersion in water for at least six months. Additionally, CNFs enhanced the tensile strength of chia seed mucilage (CM) composite films, showing a significant improvement to 26.6 MPa, representing a 231.3 % increase over the control film. This study offers a promising approach for efficiently producing CNFs from raw plants.

An introductory review on advanced multifunctional materials

This review summarizes the applications of some of the advanced materials. It included the synthesis of several nanoparticles such as metal oxide nanoparticles (e.g., Fe₃O₄, ZnO, ZrOSO₄, MoO_3-x, CuO, AgFeO₂, Co₃O₄, CeO₂, SiO₂, and CuFeO₂); metal hydroxide nanosheets (e.g., Zn₅(OH)₈(NO₃)₂·2H₂O, Zn(OH)(NO₃)·H₂O, and Zn₅(OH)₈(NO₃)₂); metallic nanoparticles (Ag, Au, Pd, and Pt); carbon-based nanomaterials (graphene, graphene oxide (GO), graphitic carbon nitride (g-C₃N₄), and carbon dots (CDs)); biopolymers (cellulose, nanocellulose, TEMPO-oxidized cellulose nanofibers (TOCNFs), and chitosan); organic polymers (e.g. covalent-organic frameworks (COFs)); and hybrid materials (e.g. metal-organic frameworks (MOFs)). Most of these materials were applied in several fields such as environmental-based technologies (e.g., water remediation, air purification, gas storage), energy (production of hydrogen, dimethyl ether, solar cells, and supercapacitors), and biomedical sectors (sensing, biosensing, cancer therapy, and drug delivery). They can be used as efficient adsorbents and catalysts to remove emerging contaminants e.g., inorganic (i.e., heavy metals) and organic (e.g., dyes, antibiotics, pesticides, and oils in water via adsorption. They can be also used as catalysts for catalytic degradation reactions such as redox reactions of pollutants. They can be used as filters for air purification by capturing carbon dioxide (CO₂) and volatile organic compounds (VOCs). They can be used for hydrogen production via water splitting, alcohol oxidation, and hydrolysis of NaBH₄. Nanomedicine for some of these materials was also included being an effective agent as an antibacterial, nanocarrier for drug delivery, and probe for biosensing.

Design and characterization of an antibacterial film composited by hydroxyethyl cellulose (HEC), carboxymethyl chitosan (CMCS), and nano ZnO for food packaging

For food packaging, a novel composite film was prepared by solution casting method using hydroxyethyl cellulose (HEC), carboxymethyl chitosan (CMCS), and zinc oxide nanoparticles as raw materials. The composite film successfully compounded the nanoparticles, as deduced by spectroscopy, crystallography and morphology observation. The addition of CMCS and ZnO enhanced the solvent resistance (the water solubility of the composite film was reduced by 94.3 %) and UV shielding ability (the UV shielding capacity of the composite film was increased by 45.73 %) of the composite film, thus improving the application prospects of the composite film in water-rich foods. In addition, the synergistic effect of CMCS and ZnO helped the composite film to efficiently inhibit the pathogenic bacteria Listeria monocytogenes and Pseudomonas aeruginosa (rate of inhibition>99.99 %) in food. The addition of CMCS and ZnO also significantly improved the elasticity (improve 494.34 %) and maximum load capacity (improve 142.24 %) of the composite film.

Synthesis of methylcellulose-polyvinyl alcohol composite, biopolymer film and thermostable enzymes from sugarcane bagasse

Agro-industrial wastes and by-products are the natural and abundant resources of biomaterials to obtain various value-added items such as biopolymer films, bio-composites and enzymes. This study presents a way to fractionate and to convert an agro-industrial residue, sugarcane bagasse (SB), into useful materials with potential applications. Initially cellulose was extracted from SB which was then converted into methylcellulose. The synthesized methylcellulose was characterized by scanning electron microscopy and FTIR. Biopolymer film was prepared by using methylcellulose, polyvinyl alcohol (PVA), glutaraldehyde, starch and glycerol. The biopolymer was characterized to exhibit 16.30 MPa tensile strength, 0.05 g/m² h of water vapor transmission rate, 366 % of water absorption to its original weight after 115 min of immersion, 59.08 % water solubility, 99.05 % moisture retention capability and 6.01 % of moisture absorption after 144 h. Furthermore, in vitro studies on absorption and dissolution of model drug by biopolymer showed 2.04 and 104.59 % of swelling ratio and equilibrium water content, respectively. Biocompatibility of the biopolymer was checked by using gelatin media and it was observed that swelling ratio was higher in initial 20 min of contact. The extracted hemicellulose and pectin from SB were fermented by a thermophilic bacterial strain, Neobacillus sedimentimangrovi UE25 that yielded 12.52 and 6.4 IU mL^-1 of xylanase and pectinase, respectively. These industrially important enzymes further augmented the utility of SB in this study. Therefore, this study emphasizes the possibility for industrial application of SB to form various products.

Novel Features of Cellulose-Based Films as Sustainable Alternatives for Food Packaging

Packaging plays an important role in food quality and safety, especially regarding waste and spoilage reduction. The main drawback is that the packaging industry is among the ones that is highly dependent on plastic usage. New alternatives to conventional plastic packaging such as biopolymers-based type are mandatory. Examples are cellulose films and its derivatives. These are among the most used options in the food packaging due to their unique characteristics, such as biocompatibility, environmental sustainability, low price, mechanical properties, and biodegradability. Emerging concepts such as active and intelligent packaging provides new solutions for an extending shelf-life, and it fights some limitations of cellulose films and improves the properties of the packaging. This article reviews the available cellulose polymers and derivatives that are used as sustainable alternatives for food packaging regarding their properties, characteristics, and functionalization towards active properties enhancement. In this way, several types of films that are prepared with cellulose and their derivatives, incorporating antimicrobial and antioxidant compounds, are herein described, and discussed.

Development of Genistein Drug Delivery Systems Based on Bacterial Nanocellulose for Potential Colorectal Cancer Chemoprevention: Effect of Nanocellulose Surface Modification on Genistein Adsorption

Genistein is an isoflavone with antioxidant, anti-inflammatory, and anticancer properties. That said, its use in the industry is limited by its low solubility in aqueous systems. In this work, bacterial nanocellulose (BNC) and BNC modified with cetyltrimethylammonium (BNC-CTAB) were evaluated as genistein-encapsulating materials for their controlled release in cancer chemoprevention. Thin films were obtained and characterized by contact angle, AFM, TEM, UV–Vis spectroscopy FTIR, and TGA techniques to verify surface modification and genistein encapsulation. The results show a decrease in hydrophilization degree and an increase in diameter after BNC modification. Furthermore, the affinity of genistein with the encapsulating materials was determined in the context of monolayer and multilayer isotherms, thermodynamic parameters and adsorption kinetics. Spontaneous, endothermic and reversible adsorption processes were found for BNC-GEN and BNC-CTAB-GEN. After two hours, the maximum adsorption capacity corresponded to 4.59 mg GEN∙g⁻¹ BNC and 6.10 mg GEN∙g⁻¹ BNC-CTAB; the latter was a more stable system. Additionally, in vitro release assays performed with simulated gastrointestinal fluids indicated controlled and continuous desorption in gastric and colon fluids, with a release of around 5% and 85%, respectively, for either system. Finally, the IC50 tests made it possible to determine the amounts of films required to achieve therapeutic concentrations for SW480 and SW620 cell lines.

Cellulose-Based Nanomaterials Advance Biomedicine: A Review

There are various biomaterials, but none fulfills all requirements. Cellulose biopolymers have advanced biomedicine to satisfy high market demand and circumvent many ecological concerns. This review aims to present an overview of cellulose knowledge and technical biomedical applications such as antibacterial agents, antifouling, wound healing, drug delivery, tissue engineering, and bone regeneration. It includes an extensive bibliography of recent research findings from fundamental and applied investigations. Cellulose-based materials are tailorable to obtain suitable chemical, mechanical, and physical properties required for biomedical applications. The chemical structure of cellulose allows modifications and simple conjugation with several materials, including nanoparticles, without tedious efforts. They render the applications cheap, biocompatible, biodegradable, and easy to shape and process.

Integrated pretreatment of banana agrowastes: Structural characterization and enhancement of enzymatic hydrolysis of cellulose obtained from banana peduncle

An integrated treatment coupling alkali, steam explosion and ammonia/chlorine-free bleaching with sequential mild acid pretreatment were performed to isolate and characterize cellulose from banana agrowastes followed by optimized enzymatic hydrolysis to glucose. The cellulose yield, compositional, microstructural, and morphological analysis initially obtained from three post-harvest banana agrowastes (peel, pseudostem, and peduncle) were surveyed. Isolation parameters for banana peduncle agrowastes, the most efficient precursor, were reconfigured for acid hydrolysis by applying an orthogonal L₉ array of Taguchi design. Effects of solution-to-pulp ratio, acid concentration, temperature, and reaction time on physicochemical parameters were assessed resulting in ~81% cellulose recovery. Subsequently, cellulase driven enzymatic conversion to glucose was modelled using response surface methodology (RSM), where the mutual influences of incubation time, enzyme concentration, substrate concentration, and surfactant concentration were investigated. Artificial Neural Network (ANN) modelling further improved upon RSM optimizations ensuing ~97% optimized glucose yield, verified experimentally.

Chemocatalytic value addition of glucose without carbon-carbon bond cleavage/formation reactions: an overview

As the monomeric unit of the abundant biopolymer cellulose, glucose is considered a sustainable feedstock for producing carbon-based transportation fuels, chemicals, and polymers. The chemocatalytic value addition of glucose can be broadly classified into those involving C-C bond cleavage/formation reactions and those without. The C6 products obtained from glucose are particularly satisfying because their syntheses enjoy a 100% carbon economy. Although multiple derivatives of glucose retaining all six carbon atoms in their moiety are well-documented, they are somewhat dispersed in the literature and never delineated coherently from the perspective of their carbon skeleton. The glucose-derived chemical intermediates discussed in this review include polyols like sorbitol and sorbitan, diols like isosorbide, furanic compounds like 5-(hydroxymethyl)furfural, and carboxylic acids like gluconic acid. Recent advances in producing the intermediates mentioned above from glucose following chemocatalytic routes have been elaborated, and their derivative chemistry highlighted. This review aims to comprehensively understand the prospects and challenges associated with the catalytic synthesis of C6 molecules from glucose.

Drug Delivery Platforms Containing Thermoresponsive Polymers and Mucoadhesive Cellulose Derivatives: A Review of Patents

Nowadays, the development of mucoadhesive systems for drug delivery has gained keen interest, with enormous potential in applications through different routes. Mucoadhesion characterizes an attractive interaction between the pharmaceutical dosage form and the mucosal surface. Many polymers have shown the ability to interact with mucus, increasing the residence time of local and/or systemic administered preparations, such as tablets, patches, semi-solids, and micro and nanoparticles. Cellulose is the most abundant polymer on the earth. It is widely used in the pharmaceutical industry as an inert pharmaceutical ingredient, mainly in its covalently modified forms: methylcellulose, ethylcellulose, hydroxyethyl cellulose, hydroxypropyl cellulose, hydroxypropyl methylcellulose, and carboxymethylcellulose salts. Aiming to overcome the drawbacks of oral, ocular, nasal, vaginal, and rectal routes and thereby maintaining patient compliance, innovative polymer blends have gained the interest of the pharmaceutical industry. Combining mucoadhesive and thermoresponsive polymers allows for simultaneous in situ gelation and mucoadhesion, thus enhancing the retention of the system at the site of administration and drug availability. Thermoresponsive polymers have the ability to change physicochemical properties triggered by temperature, which is particularly interesting considering the physiological temperature. The present review provides an analysis of the main characteristics and applications of cellulose derivatives as mucoadhesive polymers and their use in blends together with thermoresponsive polymers, aiming at platforms for drug delivery. Patents were reviewed, categorized, and discussed, focusing on the applications and pharmaceutical dosage forms using this innovative strategy. This review manuscript also provides a detailed introduction to the topic and a perspective on further developments.

Jabuticaba (Myrciaria jaboticaba) Peel as a Sustainable Source of Anthocyanins and Ellagitannins Delivered by Phospholipid Vesicles for Alleviating Oxidative Stress in Human Keratinocytes

The Brazilian berry scientifically known as jabuticaba is a fruit covered by a dark purple peel that is still rich in bioactives, especially polyphenols. Considering that, this work was aimed at obtaining an extract from the peel of jabuticaba fruits, identifying its main components, loading it in phospholipid vesicles specifically tailored for skin delivery and evaluating their biological efficacy. The extract was obtained by pressurized hot water extraction (PHWE), which is considered an easy and low dissipative method, and it was rich in polyphenolic compounds, especially flavonoids (ortho-diphenols and condensed tannins), anthocyanins (cyanidin 3-O-glucoside and delphinidin 3-O-glucoside) and gallic acid, which were responsible for the high antioxidant activity detected using different colorimetric methods (DPPH, FRAP, CUPRAC and metal chelation). To improve the stability and extract effectiveness, it was incorporated into ultradeformable phospholipid vesicles (transfersomes) that were modified by adding two different polymers (hydroxyethyl cellulose and sodium hyaluronate), thus obtaining HEcellulose-transfersomes and hyaluronan-transfersomes. Transfersomes without polymers were the smallest, as the addition of the polymer led to the formation of larger vesicles that were more stable in storage. The incorporation of the extract in the vesicles promoted their beneficial activities as they were capable, to a greater extent than the solution used as reference, of counteracting the toxic effect of hydrogen peroxide and even of speeding up the healing of a wound performed in a cell monolayer, especially when vesicles were enriched with polymers. Given that, polymer enriched vesicles may represent a good strategy to produce cosmetical and cosmeceutical products with beneficial properties for skin.

Sugarcane bagasse - A source of cellulosic fiber for diverse applications

Sugarcane bagasse is a fibrous material containing cellulose as its main component. It is produced in large quantities across the world. It is a kind of waste material that comes from the sugar industry. It is most commonly used in paper industries, but researchers have suggested that different mechanical and chemical treatments can help to extract cellulosic fibers, pure cellulose, cellulose nanofibers, and cellulose nanocrystals. These extracted materials have diverse applications in regenerated cellulosic fiber and composite material production. This paper will discuss the extraction procedures and typical applications in composite industries of these extracted materials. And an assessment will also be done on the production process and the properties of the end products to find out some common factors which can control the properties of these extracted material reinforced composites to some extent.

Valorization of khat (Catha edulis) waste for the production of cellulose fibers and nanocrystals

Cellulose fibers (C40 and C80) were extracted from khat (Catha edulis) waste (KW) with chlorine-free process using 40% formic acid/40% acetic acid (C40), and 80% formic acid/80% acetic acid (C80) at the pretreatment stage, followed by further delignification and bleaching stages. Cellulose nanocrystals (CNCs40 and CNCs80) were then isolated from C40 and C80 with sulfuric acid hydrolysis, respectively. Thus, the current study aims to isolate cellulose fibers and CNCs from KW as alternative source. The KW, cellulose fibers, and CNCs were investigated for yield, chemical composition, functionality, crystallinity, morphology, and thermal stability. CNCs were also evaluated for colloidal stability, particle size, and their influence on in vitro diclofenac sodium release from gel formulations preliminarily. The FTIR spectra analysis showed the removal of most hemicellulose and lignin from the cellulose fibers. The XRD results indicated that chemical pretreatments and acid hydrolysis significantly increased the crystallinity of cellulose fibers and CNCs. The cellulose fibers and CNCs exhibited Cellulose Iβ crystalline lattice. TEM analysis revealed formation of needle-shaped nanoscale rods (length: 101.55-162.96 nm; aspect ratio: 12.84-22.73). The hydrodynamic size, polydispersity index, and zeta potential of the CNCS ranged from 222.8-362.8 nm; 0.297-0.461, and -45.7 to -75.3 mV, respectively. CNCs40 exhibited superior properties to CNCs80 in terms of aspect ratio, and colloidal and thermal stability. Gel formulations containing high proportion of CNCs sustained diclofenac sodium release (< 50%/cm2) over 12 h. This study suggests that cellulose fibers and nanocrystals can be successfully obtained from abundant and unexploited source, KW for value-added industrial applications.

Application of Polysaccharide Biopolymer in Petroleum Recovery

Polysaccharide biopolymers are biomacromolecules derived from renewable resources with versatile functions including thickening, crosslinking, adsorption, etc. Possessing high efficiency and low cost, they have brought wide applications in all phases of petroleum recovery, from well drilling to wastewater treatment. The biopolymers are generally utilized as additives of fluids or plugging agents, to correct the fluid properties that affect the performance and cost of petroleum recovery. This review focuses on both the characteristics of biopolymers and their utilization in the petroleum recovery process. Research on the synthesis and characterization of polymers, as well as controlling their structures through modification, aims to develop novel recipes of biopolymer treatment with new application realms. The influences of biopolymer in many petroleum recovery cases were also evaluated to permit establishing the correlations between their physicochemical properties and performances. As their performance is heavily affected by the local environment, screening and testing polymers under controlled conditions is the necessary step to guarantee the efficiency and safety of biopolymer treatments.

Modification of Collagen/Gelatin/Hydroxyethyl Cellulose-Based Materials by Addition of Herbal Extract-Loaded Microspheres Made from Gellan Gum and Xanthan Gum

Because consumers are nowadays focused on their health and appearance, natural ingredients and their novel delivery systems are one of the most developing fields of pharmacy, medicine, and cosmetics. The main goal of this study was to design, prepare, and characterize composite materials obtained by incorporation of microspheres into the porous polymer materials consisting of collagen, gelatin, and hydroxyethyl cellulose. Microspheres, based on gellan gum and xanthan gum with encapsulated Calendula officinalis flower extract, were produced by two methods: extrusion and emulsification. The release profile of the extract from both types of microspheres was compared. Then, obtained microparticles were incorporated into polymeric materials with a porous structure. This modification had an influence on porosity, density, swelling properties, mechanical properties, and stability of materials. Besides, in vitro tests were performed using mouse fibroblasts. Cell viability was assessed with the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. The obtained materials, especially with microspheres prepared by emulsion method, can be potentially helpful when designing cosmetic forms because they were made from safely for skin ingredients used in this industry and the herbal extract was successfully encapsulated into microparticles.

Eco-Friendly Cellulose Nanofiber Extraction from Sugarcane Bagasse and Film Fabrication

The development of cost-effective cellulose fibers by utilizing agricultural residues have been attracted by the scientific community in the past few years; however, a facile production route along with minimal processing steps and a significant reduction in harsh chemical use is still lacking. Here, we report a straightforward ultrasound-assisted method to extract cellulose nanofiber (CNF) from fibrous waste sugarcane bagasse. X-ray diffraction-based crystallinity calculation showed 25% increase in the crystallinity of the extracted CNF (61.1%) as compared to raw sugarcane bagasse (35.1%), which is coherent with Raman studies. Field emission scanning electron microscopy (FE-SEM) images revealed thread-like CNF structures. Furthermore, we prepared thin films of the CNF using hot press and solution casting method and compared their mechanical properties. Our experiments demonstrated that hot press is a more effective way to produce high strength CNF films; Young’s modulus of the thin films prepared from the hot press was ten times higher than the solution casting method. Our results suggest that a combination of ultrasound-based extraction and hot press-based film preparation is an efficient route of producing high strength CNF films.

Extraction and characterization of celluloses from various plant byproducts

Celluloses were extracted from teff straw (TS), enset fiber (EF), sugarcane bagasse (SB) and coffee hull (CH) agro-industrial byproducts generated in large quantities in Ethiopia. The present study aimed to explore these plant byproducts as alternative sources of cellulose for potential industrial applications, using various eco-friendly chlorine-free treatment conditions to obtain an optimum cellulose extraction condition. The byproducts and the as-extracted celluloses were analyzed for chemical compositions, yield, chemical functionality, crystallinity, thermal stability and morphology. EF yielded the highest cellulose content (60.0%), whereas CH the least (35.5%). FTIR spectra and ESEM morphological studies of the celluloses indicated progressive removal of non-cellulosic constituents. XRD analyses showed EF cellulose had the highest crystallinity index (CrI) (85.56%), crystallite size (5.52 nm), and proportion of crystallite interior chains of 200 plane (0.629), exhibiting unique physicochemical properties. The byproducts and the as-extracted celluloses showed Cellulose Iβ crystal lattice, while celluloses from EF and SB also displayed (partial) polymorphic transition into Cellulose II. TGA studies revealed enhanced stability of the as-extracted celluloses. On the basis of the physicochemical characteristics of the celluloses, all the byproducts studied could be considered as alternative sources of cellulose for potential value-added industrial applications.

A review on grafting of hydroxyethylcellulose for versatile applications

Hydroxyethylcellulose (HEC) is a biocompatible, biodegradable, nontoxic, hydrophilic, non- ionic water soluble derivative of cellulose. It is broadly used in biomedical field, paint industry, as a soil amendment in agriculture, coal dewatering, cosmetics, absorbent pads, wastewater treatment and gel electrolyte membranes. Industrial uses of HEC can be extended by the its grafting with different polymers including poly acrylic acid, polyacrylamide, polylactic acid, polyethyleneglycol, polydimethyleamide, polycaprolactone, polylactic acid and dimethylamino ethylmethacrylate. This permits the formation of new biomaterials with improved properties and versatile applications. In this article, a comprehensive overview of graft copolymers of HEC with other polymers/compounds and their applications in drug delivery, stimuli sensitive hydrogels, super absorbents, personal hygiene products and coal dewatering is presented.

Analysis of the physicochemical properties of antimicrobial compositions with zinc oxide nanoparticles

In this study, an antimicrobial composition based on polyvinyl alcohol (PVA) and zinc oxide (ZnO) was developed. The aim of the work was to obtain a film-forming product for antimicrobial treatment of surfaces. To improve the physical, mechanical, and film-forming properties of the compositions, three natural stabilizing agents were added to the formulation: gelatine, guar gum and hydroxyethyl cellulose. Formulations with different concentrations of each stabilizer were tested, and the physicochemical properties of the obtained products were measured. The size of zinc oxide particles in obtained compositions varied from 232 to 692 nm. The compositions had a slight acidic nature. Their pH ranged from 6.84 to 6.99. The average density of products was equal to 1.37 × 10³ (kg/m³). It was confirmed that zinc oxide nanoparticles do not penetrate through a model dermal membrane which is a desired effect concerning their toxicity. The antimicrobial activity of the obtained compositions was assessed against Aspergillus niger strain. After 24 h of studying, the growth inhibition was in 71% greater than in reference material. After statistical analysis of the results, it was concluded in order to achieve the most desirable physicochemical and utilitarian properties, the concentrations of gelatine, guar gum and hydroxyethylcellulose should be equal to 0.5%, 0.03% and 0.055%, respectively.

Co-preparation of pectin and cellulose from apple pomace by a sequential process

Apple pomace contains a plentiful pectin and cellulose resource which coexist with lignin and hemicellulose by a complex chemical and physical association in the plant cell walls. To increase the value and promote the utilization of apple pomace, it was used to produce pectin and cellulose by chemical treatments. In the case of 110 min, 10% (w/w) acetic acid and 100 °C, extraction yield of pectin reached 19.6%. Response surface methodology was applied to determine the main factors affecting the lignin removal rate (LR). LR was optimal at 70 °C, pH 4.0 and 6.0% NaClO₂ concentration for 2 h in a 20% (w/v) ratio. These conditions removed 89.8% lignin from depectinated apple pomace followed by sodium hydroxide treatment for the cellulose. Cellulose was achieved more than 80.7%. Consequently, a large-scale experimental analysis showed that 196.0 g of pectin and 243.9 g of cellulose (90.4% purity) was collectively prepared from 1000 g of apple pomace.

Biodegradable water hyacinth cellulose-graft-poly(ammonium acrylate-co-acrylic acid) polymer hydrogel for potential agricultural application

Swollen cellulose fibres isolated from water hyacinth were utilized in the synthesis of water hyacinth cellulose-graft-poly(ammonium acrylate-co-acrylic acid) polymer hydrogel (PHG). Acrylic acid (AA) partially neutralized with NH₃ was heterogeneously grafted onto swollen cellulose by radical polymerization reaction using N,N-methylene-bis-acrylamide (MBA) as the cross-linker and ammonium persulphate (APS) as the initiator. The reaction conditions were optimized through assessment of grafting parameters such as grafting cross-linking percentage (GCP), percentage grafting cross-linking efficiency (%GCE) and water absorption tests. Characterization of the copolymer by Fourier Transform Infra-red (FTIR) spectroscopy revealed successful grafting of the monomer onto cellulose. Transmission electron microscopy (TEM) image of acetone-extracted PHG displayed micro-porous structure. The optimized product swelled in distilled water up to 165 times its own dry weight. The swelling was influenced by the pH and presence, nature and concentration of ions. The hydrogel had the capacity to retain moisture in soil, and degradation testing revealed a higher mass loss in cellulose grafted copolymer compared to the copolymer without cellulose. Degradation by soil microbial isolates showed significantly higher (P ≤ 0.05) accumulation of NH₄⁺ in the cellulose grafted copolymer up to 0.05% (w/v) from 40 to 100 h, relative to similar amounts of copolymer without cellulose. The use of water hyacinth, a notorious weed in Kenyan waters, to produce cellulose-based polymer hydrogels has not been explored and yet, it could form an effective and beneficial way of utilizing this plant. A mechanism of graft polymerization reaction has also been proposed. The synthesized product can be applied in agriculture and other fields where biodegradability and effective utilization of water is essential.

Simplified sodium chlorite pretreatment for carbohydrates retention and efficient enzymatic saccharification of silvergrass

In this work, a simplified and cost-effective chlorite pretreatment method to improve the hydrolysabiliy of biomass was developed. Compared to common used sodium chlorite-acetic acid (SCA) pretreatment (18.1%), sodium chlorite (SC) pretreatment resulted in less xylan loss (7.8%), thus led more carbohydrates retention. Moreover, the Chinese silvergrass pretreated by SC for 2 h achieved higher glucose yield (70.5%) than the substrate pretreated by SCA under the same pretreatment conditions did (58.7%), after 48 h enzymatic hydrolysis by cellulase. By synergistic action of cellulase and xylanase, the glucose yield of SC pretreated (12 h) samples reached to 93.5% with 808.7 mg/g DM total reducing sugars yields. In addition, without the usage of acetic acid could decrease the process cost and result in less inhibitor generation in pretreatment process.

Visualization and Semiquantitative Study of the Distribution of Major Components in Wheat Straw in Mesoscopic Scale using Fourier Transform Infrared Microspectroscopic Imaging

Understanding the biochemical heterogeneity of plant tissue linked to crop straw anatomy is attractive to plant researchers and researchers in the field of biomass refinery. This study provides an in situ analysis and semiquantitative visualization of major components distribution in internodal transverse sections of wheat straw based on Fourier transform infrared (FTIR) microspectroscopic imaging, with a fast non-negativity-constrained least squares (fast NNLS) fitting. This paper investigates changes in biochemical components of tissue during stages of elongation, booting, heading, flowering, grain-filling, milk-ripening, dough, and full-ripening. Visualization analysis was carried out with reference spectra for five components (microcrystalline cellulose, xylan, lignin, pectin, and starch) of wheat straw. Our result showed that (a) the cellulose and lignin distribution is consistent with that from tissue-dyeing with safranin O-fast green and (b) the distribution of cellulose, lignin, and starch is consistent with chemical images for characteristic wavelength at 1432, 1507, and 987 cm^-1, respectively, showing no interference from the other components analyzed. With the validation from biochemical images using characteristic wavelength and tissue-dyeing techniques, further semiquantitative analysis in local tissues based on fast NNLS was carried out, and the result showed that (a) the contents of cellulose in various tissues are very different, with most in parenchyma tissue and least in the epidermis and (b) during plant development, the fluctuation of each component in tissues follows nearly the same trend, especially within vascular bundles and parenchyma tissue. Thus, FTIR microspectroscopic imaging combined with suitable chemometric methods can be successfully applied to study chemical distributions within the internodes transverse sections of wheat straw, providing semiquantitative chemical information.

Solid polymer electrolyte production from 2-hydroxyethyl cellulose: Effect of ammonium nitrate composition on its structural properties

Addition of doping materials can possibly enhance the ionic conduction of solid polymer electrolyte (SPE). In this work, a new SPE using 2-hydroxyethyl cellulose (2-HEC) incorporated with different ammonium nitrate (NH₄NO₃) composition was prepared via solution casting method. Studies of structural properties were conducted to correlate the ionic conductivity of 2-HECNH₄NO₃ SPE using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. Encouraging result was obtained as the ionic conductivity increased about two orders of magnitude upon addition of 12wt% of NH₄NO₃. XRD analysis shows the most amorphous SPE was obtained at 12-NH₄NO₃. From FTIR spectra, the interactions between 2-HEC and NH₄NO₃ were observed by the shifts of COH peak from 1355cm^-1 to 1330cm^-1 and the presence of new NH peak in the OH region. The spectrum has been validated theoretically using Gaussian software. The results obtained from this study corroborate that the complexes of 2-HEC and NH₄NO₃ responsible to promote the ionic conductivity to the higher value.