Highly selective and sensitive determination of copper ion by two novel optical sensors

Construction of an optical sensor for copper determination in environmental, food, and biological samples based on the covalently immobilized 2-(2-benzothiazolylazo)-3-hydroxyphenol in agarose

An optical chemical sensor has been developed for the quantitative spectrophotometric analysis of copper. The optode is dependent on covalent immobilization of 2-(2-benzothiazolylazo)-3-hydroxyphenol (BTAHP) in a transparent agarose membrane. The absorbance variation of immobilized BTAHP on agarose as a film upon the addition of 5 × 10-3 M aqueous solutions of Mn2+, Zn2+, Hg2+, Cd2+, Pb2+, Co2+, Ni2+, Fe2+, La3+, Fe3+, Cr3+, Zr4+, Se4+, Th4+, and UO22+ revealed substantially higher changes in the Cu2+ ion content compared to other ions investigated here. The effects of various experimental parameters, such as the solution pH, the reaction time, and the concentration of reagents, on the quality of Cu2+ sensing were examined. Under ideal experimental circumstances, a linear response was achieved for Cu2+ concentrations ranging from 1.0 × 10-9 to 7.5 × 10-6 M with an R2 value of 0.9988. The detection (3σ) and quantification (10σ) limits of the procedure for Cu2+ analyses were 3.0 × 10-10 and 9.8 × 10-10 M, respectively. No observable interference was recorded in the detection of Cu2+ due to other inorganic cations. With no indication of BTAHP leaching, the membrane demonstrated good durability and quick response times. The optode was effectively used to determine the presence of Cu2+ in environmental water, food, and biological samples.

Colorimetric detection of heavy metal ions with various chromogenic materials: Strategies and applications

Detection of heavy metal ions has drawn significant attention in environmental and food area due to their threats to the human health and ecosystem. Colorimetry is one of the most frequently-used methods for the detection of heavy metal ions owing to its simplicity, easy operation and rapid on-site detection. The development of chromogenic materials and their sensing mechanisms are the key research direction in the area of colorimetric method. Since each chromogenic material has their unique optical and chemical properties, they have totally different colorimetric sensing mechanisms. This review focuses on the chromogenic materials and their sensing strategies for the colorimetric detection of heavy metal ions. We divide the chromogenic materials into three types, including organic materials, inorganic materials, and other materials. As for each type of chromogenic material, we discuss their detailed sensing strategies, sensing performance, and real sample applications. Moreover, current challenges and perspectives related to the colorimetry of heavy metal ions are also discussed in this review. The aim of this review is to help readers to better understand the principles of colorimetric methods for heavy metal ions and push the development of rapid detection of heavy metal ions.

A New Sensing Material Based on Tetraaza/SBA15 for Rapid Detection of Copper(II) Ion in Water

A novel rapid and sensitive optical sensor for Cu2+ ion detection based on 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradeca-7,14-dienium dibromide (TL) immobilized on Santa Barbara Amorphous (SBA-15) has been successfully developed. The inner and outer space of SBA15 allowed a high capacity of TL compound to immobilize onto it. FESEM (Field Emission Scanning Electron Microscopy) analysis was performed to confirm the morphology of TL-SBA15, while FTIR (Fourier Transform Infrared Spectroscopy) was utilized to confirm the interaction of TL−SBA15. A binding study of TL compound towards Cu2+ ion was performed via UV-vis solution study and binding titration. The stoichiometric binding ratio and binding constant value Kb of TL towards Cu2+ ion was 1:1 and 2.33 × 103 M−1, respectively. The optical reflectance sensor based on the TL compound is selective to Cu2+ ion and demonstrated a linear response over a Cu2+ ion concentration range of 1 × 10−7 M to 2 × 10−5 M, with a detection limit (LOD) of 1.02 × 10−7 M (R2 = 0.99) and fast response time of < 1 min. It showed high reproducibility, with a relative standard deviation (RSD) obtained at 0.47%. This optical sensor is reusable up to five consecutive times on Cu2+ ion by using 0.1 M EDTA with a pH of 6 as a regeneration solution, with a reversibility RSD value of 0.79%. The developed optical sensor provides a rapid and sensitive tool for Cu2+ ion detection in teabag samples, and the results align with those obtained by the ICP-MS standard method.

Luminescent Properties of Lanthanoid-Poly(Sodium Acrylate) Composites: Insights on the Interaction Mechanism

The interaction between polyelectrolytes and metal ions is governed by different types of interactions, leading to the formation of different phases, from liquid state to weak gels, through an appropriate choice of metal ion/polyelectrolyte molar ratio. We have found that lanthanide ions, europium(III) and terbium(III), are able to form polymer composites with poly(sodium acrylate). That interaction enhances the luminescent properties of europium(III) and terbium(III), showing that Eu³⁺/poly(sodium acrylate) (PSA) and Tb³⁺/PSA composites have a highly intense red and green emission, respectively. The effect of cations with different valences on the luminescent properties of the polymer composites is analyzed. The presence of metal ions tends to quench the composite emission intensity and the quenching process depends on the cation, with copper(II) being by far the most efficient quencher. The interaction mechanism between lanthanoid ions and PSA is also discussed. The composites and their interactions with a wide range of cations and anions are fully characterized through stationary and non-stationary fluorescence, high resolution scanning electronic microscopy and X-ray diffraction.

A novel and simple deep eutectic solvent based liquid phase microextraction method for rhodamine B in cosmetic products and water samples prior to its spectrophotometric determination

A novel and green deep eutectic solvent based liquid phase microextraction (DES-LPME) methodology has been proposed for the assessment of rhodamine B from cosmetic products and water samples. A deep eutectic solvent (DES) consist of tetrabutyl ammonium chloride-decanoic acid (1:2) as extraction solvent and tetrahydrofuran as emulsification agent were used for the microextraction of rhodamine B. The quantitative recoveries were achieved at pH 3 by using 0.3 mL of DES and 0.3 mL of THF. The rhodamine B concentration in last volume was analyzed by mirco-cuvette UV-VIS spectrophotometer at 550 nm. The limit of detection (LOD), limit of quantification (LOQ), preconcentration factor (PF) and relative standard deviation (RSD %) were found as 2.2 μg L^-1, 7.3 μg L^-1, 25 and 2.3%, respectively. Accuracy and validity of the developed method was verified by addition-recovery studies for water and cosmetic samples.

Design of novel and modified dual optode membrane based on carbon dots for both ultratrace copper(ii) and cobalt(ii): derivative spectrophotometric and central composite design study

A selective, accurate and highly sensitive optical chemical sensor (optode) for the simultaneous determination of copper(ii) and cobalt(ii) without any prior separation or purification ion sensing was developed.