Effective and highly recyclable ceramic membrane based on amorphous nanosilica for dye removal from the aqueous solutions

Low-Cost Antibacterial Ceramic Water Filters for Decentralized Water Treatment: Advances and Practical Applications

Access to clean water remains challenging for people living in underdeveloped regions, rural areas, and remote locations. In the absence of centralized water treatment systems, point-of-use (POU) solutions are necessary. Ceramic water filters (CWFs) have emerged as a practical and affordable option for decentralized water treatment. This review focuses on recent advances in antibacterial CWFs, including preparation methods, filtration performance, and applications. The review highlights the significance of preparation techniques, material choices, and additives in determining CWF properties and performance. Despite virus and chemical contaminant removal limitations, ongoing research on nanofillers and antibacterial additives shows promise for enhancing the CWF performance. The cost-effectiveness, ease of production, and low operational requirements of CWF make it a viable solution for decentralized drinking water systems, particularly in resource-limited areas. Studies have demonstrated the efficacy of CWFs in reducing water contaminants, but proper maintenance and user training are crucial to optimal performance.

H3PO4/KOH Activation Agent for High Performance Rice Husk Activated Carbon Electrode in Acidic Media Supercapacitors

H₃PO₄/KOH combined solution is proposed as a new effective activation agent for activated carbon production from rice husk. Several activated carbon samples were produced by using different volumes of the utilized acid and alkali individually, in addition to the combined solution. FTIR results indicated that the mixed agent partially decomposed the chemical compounds on the rice husk char surface, resulting in an increase in the surface area. Moreover, XRD and EDS analyses showed the presence of a considerable amount of amorphous silica. Electrochemical measurements concluded that the volume of the activation agent solution should be optimized for both single and mixed activation agents. Numerically, for 0.3 g treated rice husk char, the maximum specific capacitance was observed at 7, 10 and 14 mL of H₃PO₄, KOH (3 M) and mixed (1:1 by volume) activation agents, respectively; the determined specific capacitance values were 73.5, 124.2 and 241.3 F/g, respectively. A galvanostatic charging/discharging analysis showed an approximate symmetrical triangular shape with linear voltage versus time profile which indicates very good electrochemical performance as an electrode in the supercapacitors application. The stability of the proposed activated carbon was checked by performing a cyclic voltammetry measurement for 1000 cycles at 2 mV/s and for 30,000 cycles at 10 mV/s. The results indicate an excellent specific capacitance retention, as no losses were observed.

Technological trends in nanosilica synthesis and utilization in advanced treatment of water and wastewater

Water and wastewater treatment applications stand to benefit immensely from the design and development of new materials based on silica nanoparticles and their derivatives. Nanosilica possesses unique properties, including low toxicity, chemical inertness, and excellent biocompatibility, and can be developed from a variety of sustainable precursor materials. Herein, we provide an account of the recent advances in the synthesis and utilization of nanosilica for wastewater treatment. This review covers key physicochemical aspects of several nanosilica materials and a variety of nanotechnology-enabled wastewater treatment techniques such as adsorption, separation membranes, and antimicrobial applications. It also discusses the prospective design and tuning options for nanosilica production, such as size control, morphological tuning, and surface functionalization. Informative discussions on nanosilica production from agricultural wastes have been offered, with a focus on the synthesis methodologies and pretreatment requirements for biomass precursors. The characterization of the different physicochemical features of nanosilica materials using critical surface analysis methods is discussed. Bio-hybrid nanosilica materials have also been highlighted to emphasize the critical relevance of environmental sustainability in wastewater treatment. To guarantee the thoroughness of the review, insights into nanosilica regeneration and reuse are provided. Overall, it is envisaged that this work's insights and views will inspire unique and efficient nanosilica material design and development with robust properties for water and wastewater treatment applications.

Coconut Fiber Decorated with Bismuth Vanadate for Enhanced Photocatalytic Activity

Bismuth vanadate/coconut fiber (BiVO4/CF) composites were synthesized by coprecipitation and calcination methods. All catalysts used in this work were prepared by a simple coprecipitation method and fully characterized by means of XRD, SEM-EDS, PL, BET N2 adsorption, zeta potential, and UV-vis DRS. Degradation of indigo carmine (IC) under visible light irradiation was tracked by the UV-vis technique. It was documented that XRD patterns of BiVO4 and BiVO4/CF samples retained the monoclinic structure. From SEM, the CF sheets were visualized, covering the surface of BiVO4 particles. The specific surface area of the synthesized catalysts increased from 1.77 to 24.82 m2/g. The shift of absorption edge to a longer wavelength corresponded to a decrease in band gap energy from 2.3 to 2.2 eV. The photocatalytic degradation rate of the BiVO4/CF composite was five times higher than that of pristine BiVO4. Moreover, the photocatalyst can be separated and recycled with little change after the third times recycling. The improved activity of the composite resulted from the combination of the adsorption performance of the substrate CF and the photocatalytic activity of BiVO4. In addition, the position of the specific mechanism could occur via both the active species of superoxide radical and hydroxyl radical.

Ceramic membrane overview and applications in textile industry: a review

The importance of water recovery and reuse is increasing day by day. Therefore, the use of advanced technologies is applied for the treatment and recovery of textile wastewater. The fact that ceramic membranes are resistant to the challenging characteristics of textile wastewater makes the use of ceramic membranes useful. Within the scope of this review, general information about the textile industry and treatment techniques are mentioned, as well as the properties of ceramic membranes and textile wastewater treatment. In the literature review made in this study, recent studies on the production of ceramic membranes and laboratory applications have been compiled. However, it has been observed that although the real-scale studies are relatively higher in industries such as the food and petrochemical industry, it is rather limited in the textile industry.

Nanoparticles functionalized ceramic membranes: fabrication, surface modification, and performance

Membrane technologies are used intensively for desalination and wastewater treatment. Water filtration using ceramic membranes exhibited high performance compared with polymeric membranes due to various properties such as high resistance to fouling, permeability, rejection rate, and chemical stability. Recently, the performance of nanocomposite ceramic membranes was improved due to the development in nanotechnology. This article focusses on the development of porous ceramic membranes and nanomaterial functionalized ceramic membranes for water filtration applications. At the beginning, various fabrication methods of ceramic membranes were described, and the effect of surface modification techniques on the membrane intrinsic properties was reviewed. Then, the performance of nanoparticles functionalized ceramic membranes was evaluated in terms of physicochemical properties, rejection rate, and water permeability. This work can help new entrants and established researchers to become familiar with the current challenges and developments of nanoparticle-incorporated ceramic membranes for water filtration applications.

Recent advances in the application of silica nanostructures for highly improved water treatment: a review

The demand for high-quality safe and clean water supply has revolutionized water treatment technologies and become a most focused subject of environmental science. Water contamination generally marks the presence of numerous toxic and harmful substances. These contaminants such as heavy metals, organic and inorganic pollutants, oil wastes, and chemical dyes are discharged from various industrial effluents and domestic wastes. Among several water treatment technologies, the utilization of silica nanostructures has received considerable attention due to their stability, sustainability, and cost-effective properties. As such, this review outlines the latest innovative approaches for synthesis and application of silica nanostructures in water treatment, apart from exploring the gaps that limit their large-scale industrial application. In addition, future challenges for improved water remediation and water quality technologies are keenly discussed.

Structures, Properties, and Performances-Relationships of Polymeric Membranes for Pervaporative Desalination

For the fulfilment of increasing global demand and associated challenges related to the supply of clean-and-safe water, PV has been considered as one of the most attractive and promising areas in desalinating salty-water of varied salinities. In pervaporative desalination, the sustainability, endurance, and structural features of membrane, along with operating parameters, play the dominant roles and impart paramount impact in governing the overall PV efficiency. Indeed, polymeric- and organic-membranes suffer from several drawbacks, including inferior structural stability and durability, whereas the fabrication of purely inorganic membranes is complicated and costly. Therefore, recent development on the high-performance and cost-friendly PV membrane is mostly concentrated on synthesizing composite- and NCP-membranes possessing the advantages of both organic- and inorganic-membranes. This review reflects the insights into the physicochemical properties and fabrication approaches of different classes of PV membranes, especially composite- and NCP-membranes. The mass transport mechanisms interrelated to the specialized structural features have been discussed. Additionally, the performance potential and application prospects of these membranes in a wide spectrum of desalination and wastewater treatment have been elaborated. Finally, the challenges and future perspectives have been identified in developing and scaling up different high-performance membranes suitable for broader commercial applications.

Removal of As(iii) and As(v) from water using green, silica-based ceramic hollow fibre membranes via direct contact membrane distillation

Arsenite [As(iii)] and arsenate [As(v)] removal by direct contact membrane distillation (DCMD) using novel hydrophobic green, silica-based ceramic hollow fibre membranes derived from agricultural rice husk was investigated in this work. The green ceramic hollow fibre membranes were prepared from amorphous (ASHFM) and crystalline (CSHFM) silica-based rice husk ash and modified to be hydrophobic via immersion fluoroalkylsilane (FAS) grafting of 1H,1H,2H,2H-perfluorodecyltriethoxysilane. Superhydrophobic contact angle values up to 157° and 161° were obtained for ASHFM and CSHFM, respectively. Remarkably, the membrane surface morphology mimicked a look-alike lotus-leaf structure with decrement in pore size after grafting via the silane agent for both membranes. The effect of arsenic pH (3–11), arsenic concentration (1–1000 ppm) and feed temperature (50–80 °C) were studied and it was found that feed temperature had a significant effect on the permeate flux. The hydrophobic CSHFM, with a flux of 50.4 kg m⁻² h⁻¹ for As(iii) and 51.3 kg m⁻² h⁻¹ for As(v), was found to be the best of the tested membranes. In fact, this membrane can reject arsenic to the maximum contaminant level (MCL) limit of 10 ppb under any conditions, and no swelling mechanism of the membranes was observed after testing for 4 hours.

Arsenite [As(iii)] and arsenate [As(v)] removal by direct contact membrane distillation (DCMD) using novel hydrophobic green, silica-based ceramic hollow fibre membranes derived from agricultural rice husk was investigated in this work.

Chemical and microstructural analyses for heavy metals removal from water media by ceramic membrane filtration

This study aims to investigate the ability of low cost ceramic membrane filtration in removing three common heavy metals namely; Pb²⁺, Cu²⁺, and Cd²⁺ from water media. The work includes manufacturing ceramic membranes with dimensions of 15 by 15 cm and 2 cm thickness. The membranes were made from low cost materials of local clay mixed with different sawdust percentages of 0.5%, 2.0%, and 5.0%. The used clay was characterized by X-ray diffraction (XRD) and X-ray fluorescence analysis. Aqueous solutions of heavy metals were prepared in the laboratory and filtered through the ceramic membranes. The influence of the main parameters such as pH, initial driving pressure head, and concentration of heavy metals on their removal efficiency by ceramic membranes was investigated. Water samples were collected before and after the filtration process and their heavy metal concentrations were determined by chemical analysis. Moreover, a microstructural analysis using scanning electronic microscope (SEM) was performed on ceramic membranes before and after the filtration process. The chemical analysis results showed high removal efficiency up to 99% for the concerned heavy metals. SEM images approved these results by showing adsorbed metal ions on sides of the internal pores of the ceramic membranes.