The validation of Quantitative light-induced fluorescence to quantify acid erosion of human enamel

Three-Dimensional Planimetry Assessment of Dental Plaque-Covered Area Reduction after Rinsing with 0.2% Sodium Hypochlorite Solution as Part of a Guided Biofilm Therapy® Protocol-Pilot Longitudinal Study

Background/Objectives: Less often employed as a rinsing solution for controlling oral biofilms, NaOCL was used in oral rinses at various concentrations in steps 1 and 4 of periodontal therapy. The aim of this study was to quantitatively evaluate the biofilm-disruptive properties of a 0.2% NaOCl solution in standardized oral rinses using dedicated plaque-disclosing agents and 3D scanning methods in patients undergoing the regular Guided Biofilm Therapy® protocol. Methods: Eight patients with at least 20 teeth present evenly distributed between the two arches were included. After 24 h of refraining from oral hygiene, dental arches were stained with a disclosing agent, the subjects rinsed for 20 s, clinical photographs and 3D scans were performed, subjects rinsed again for 20 s, photographs and 3D scans were performed again, and then the GBT® protocol was resumed as usual. Data representing areas covered with dental plaque were acquired using the "Medit Scan for Clinics" software and then underwent a post-processing and rendering process. The outcome variable was the percent reduction in the plaque-covered areas. Results: For the upper jaw, the estimated mean percent reduction in the biofilm-covered area was 39.65%, while for the mandible, it was 38.26%. The analysis of individual photographs revealed changes in the plaque-covered areas and reductions in the color intensity of the residual plaque-covered areas under identical lighting conditions. Conclusions: When analyzed using 3D intraoral scanning, the 0.2% NaOCl rinsing solution seems to be a clinically efficient disruptor/dissolvent of the oral biofilm, both when integrated into modern protocols of periodontal therapy like GBT® and for home self-care.

Enhanced effect of a novel bioactive glass-ceramic for dental application

OBJECTIVES

Dental caries is the most common chronic disease in humans, caused by the acid produced by the microflora in the mouth that dissolves the enamel minerals. Bioactive glass (BAG) has been used in various clinical applications due to its unique bioactive properties, such as bone graft substitutes and dental restorative composites. In this study, we introduce a novel bioactive glass-ceramic (NBGC) prepared through a sol-gel process under a water-free condition.

MATERIALS AND METHODS

The anti-demineralization and remineralization effects of NBGC were evaluated by comparing the measurements of bovine enamel surface morphology, surface roughness, surface micro-hardness, enamel elements, and mineral content before and after related treatments with a commercial BAG. The antibacterial effect was characterized by minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC).

RESULTS

Results showed that NBGC had greater acid resistance and remineralization potential compared to commercial BAG. The fast formation of a hydroxy carbonate apatite (HCA) layer suggests efficient bioactivity.

CLINICAL RELEVANCE

In addition to its antibacterial properties, NBGC shows promise as an ingredient in oral care products that can prevent demineralization and restore enamel.

Assessment of demineralized tooth lesions using optical coherence tomography and other state-of-the-art technologies: a review

Tooth demineralization is one of the most common intraoral diseases, encompassing (1) caries caused by acid-producing bacteria and (2) erosion induced by acid of non-bacterial origin from intrinsic sources (e.g. stomach acid reflux) and extrinsic sources (e.g. carbonated drinks). Current clinical assessment based on visual-tactile examination and standardized scoring systems is insufficient for early detection. A combination of clinical examination and technology is therefore increasingly adapted. This paper reviews various procedures and technologies that have been invented to diagnose and assess the severity of tooth demineralization, with focus on optical coherence tomography (OCT). As a micron-resolution non-invasive 3D imaging modality, variants of OCT are now available, offering many advantages under different working principles for detailed analytical assessment of tooth demineralization. The roles, capabilities and impact of OCT against other state-of-the-art technologies in both clinical and research settings are described. (139 words).

Tooth Wear and Tribological Investigations in Dentistry

Dental or tooth wear is a physiological process in the life cycle of teeth. Loss of the occlusal surface may cause excessive tooth wear. Several factors may contribute to tooth wear with different intensities and duration in the oral cavity. The oral cavity is generally compared to a tribological system to determine the various types of wear between teeth and restorative materials and assess the amount of dental wear. However, it is challenging to investigate in vitro and in vivo wear owing to the complexity of tooth wear; thus, a clear correlation between in vitro and in vivo data could not be established. This review is aimed at providing an insight into the etiology of tooth wear and tribological investigations in dentistry.

Influence of energy drinks on enamel erosion: In vitro study using different assessment techniques

Background

Dental erosion has become a relevant public health problem in recent years and is related to the increase in the consumption of acidic beverages. Objective: The aim of the present study was to evaluate the erosive potential of energy drinks on dental enamel using an in vitro erosion model.

Material and Methods

Thirty-eight blocks of human enamel were divided into four groups: G1- TNT Energy Drink®(n=8), G2- Red Bull® (n=10), G3- Monster Energy® (n=10), and G4- Coca-Cola® (n=10) (positive control). For the chemical analysis, the pH values, titratable acidity, and buffering capacity of the beverages were measured in triplicate. For the erosive test, the specimens were immersed in the beverages (5ml/block) for 30 minutes at room temperature with gentle shaking. Initial and final surface microhardness values were measured and the percentage of the loss of surface microhardness was calculated. Profilometry (surface loss and lesion depth) and mineral loss analysis (quantitative light-induced fluorescence) were performed. The data were analysed statistically using ANOVA followed by the Bonferroni correction, Pearson’s correlation test, and multiple linear regression (p<0.05).

Results

The energy drinks had pH values ranging from 2.36 to 3.41. The lowest titratable acidity value was recorded for Monster Energy® and the highest was recorded for TNT Energy Drink®. All energy drinks had buffering capacity values higher than Coca-Cola®. Analysing the eroded enamel surface, the specimens submitted to TNT Energy Drink® had the greatest percentage loss of surface microhardness, surface loss, depth, and mineral loss, followed by those submitted to Red Bull® and Monster Energy®. Surface loss was the only predictor of mineral loss (p<0.001).

Conclusions

Based on the study model employed, all the energy drinks examined were erosive to tooth enamel and TNT Energy Drink® had the worst behaviour.

Key words:Energy drinks, tooth erosion, tooth demineralisation, hardness tests, quantitative light-induced fluorescence.

Amelogenin Peptide-Chitosan Hydrogel for Biomimetic Enamel Regrowth

We designed synthetic peptides that have demonstrated an effective remineralization potential to restore incipient enamel decay. In order to develop a clinically viable approach we incorporated the amelogenin-derived peptides P26 and P32 into chitosan hydrogel and examined their efficacy in the remineralization of enamel. Peptides in chitosan exhibited increased stability in vitro as compared to peptides in solution at room temperature and at 37°C. Tooth models for enamel erosion (sections) and white spot lesions (blocks) were subject to periods of demineralization. Treatment groups were subjected to remineralization in artificial saliva in the presence of P26 and P32 in solution and in chitosan hydrogel (P26-CS and P32-CS). Quantitative light-induced fluorescence (QLF) was employed to analyze mineral density following demineralization and remineralization across all the treatment groups. Scanning electron microscopy and nanoindentation were used to characterize the surface structure and mechanical strength of regrown enamel. Control enamel sections treated in artificial saliva demonstrated randomly distributed, tiny, needle-shaped crystals with a low packing density and porosities displaying mineralization defects. In samples treated with P26-CS or P32-CS a denser coating of organized hydroxyapatite (HAP) crystals was formed covering the entire surfaces of demineralized enamel window. The hardness and modulus of enamel surfaces were increased after treatment with P26-CS and P32-CS with no significant difference in the mechanical properties between the two peptide hydrogels. Analysis of mineral density by QLF showed that in enamel sections P26 peptide alone or P26-CS significantly enhanced the remineralization. In enamel blocks P26 in solution had a better efficacy than P26-CS.

Evaluation of the assessment of tooth wear by general dental practitioners

Aim To evaluate currently available methods for assessing and monitoring tooth wear in a general dental practice environment.Method A questionnaire was developed and used to obtain data. Models were used to test the dentists' assessment of tooth wear. Ethical permission was obtained.Results Twenty general dental practitioners were interviewed and 100% were aware of the use of study models, 50% about the use of photographs and 45% of the BEWE. Methods used to assess and monitor tooth wear were study models (75%), photographs (65%), BEWE (10%), Smith & Knight index (0%) and no method (15%). Sixty-five percent of dentists were unaware of any guidelines on monitoring tooth wear. In comparing serial photographs, no participant correctly identified all the wear changes and 25% thought a change had occurred when one hadn't. Statistical analysis showed a sensitivity of only 73% with a specificity of 75%. In comparing serial study models (same cases as used in the photographs), 55% of participants identified a change when no change occurred and 50-60% of participants were able to correctly identify if wear had or had not occurred. Participants graded the models according to BEWE. Statistical analysis of these results shows a sensitivity of just 69% with a specificity of only 55%. The inter-operator agreement (Fliess' Kappa) showed an even lower degree of agreement was found with only 0.12, which suggests only a slight level of agreement, less than that with photographs.Conclusion Dentists do not seem to be aware of the current guidelines but do make reasonable attempts to monitor tooth wear. None of the currently available methods are ideal and even the use of serial study models is open to much inter-operator variability.

Spectral characteristics of caries autofluorescence obtained from different locations and caries severities

Dental caries usually occurs at interproximal and occlusal surfaces. The purpose of the present study was to determine if characteristic spectral factors extracted from autofluorescence (AF) spectra are informative regarding caries detection and the determination of caries stage as compared with DIAGNOdent results. AF spectra were obtained from caries lesions of different severities at two locations using a 405 nm laser. Three spectral factors, that is, spectral slope at 550 to 600 nm, spectral area under the curve at 500 to 590 nm and two-peak ratio between 625 and 667 nm, were extracted. The values of three spectral factors linearly decreased as caries progressed. According to micro-CT images, conventional visual and tactile inspections of lesions under or overestimated (25%-65%) caries states, and brown or thickly stained layer on interproximal or occlusal surfaces, respectively, caused misclassifications of caries stage. Of the spectral factors examined, spectral slope and area under curve for interproximal and occlusal surfaces, respectively, were found to be significantly related to caries stage and showed least data overlap. For interproximal and occlusal surfaces, DIAGNOdent readings of different stages overlapped considerably though their mean values were significantly different regardless of stage.

Effectiveness of S-PRG Filler-Containing Toothpaste in Inhibiting Demineralization of Human Tooth Surface

OBJECTIVES

Using an established pH-cycling caries model, the authors evaluated the effectiveness of toothpastes containing Surface Pre-reacted Glass-ionomer filler (S-PRG) in preventing tooth surface demineralization.

MATERIALS AND METHODS

210 tooth blocks were randomly assigned to seven experimental groups (30 blocks/group): no treatment (A), and toothpaste containing either NaF (B), 0 wt% S-PRG (C), 1 wt% S-PRG (D), 5 wt% S-PRG (E), 20 wt% S-PRG (F) or 30 wt% S-PRG (G). Groups were subjected to 14-day demineralization for development of early caries lesions using a pH-cycling caries model. Demineralization was assessed using Quantitative Light-induced Fluorescence (QLF) and Transverse Microradiography (TMR). All pairwise contrasts (between treatments) were tested using Analysis of Variance (ANOVA), and then Tukey's HSD for multiple comparisons. All p-values are considered significant if <0.05.

RESULTS

With QLF, there was a significant (ANOVA; p<0.001) difference in mean percent fluorescence loss (∆F) observed among the groups. Relative to control, all S-PRG-containing toothpastes significantly (Tukey's; p<0.0001) inhibited demineralization at varying percentages (48.6%, 61.3%, 67.4% and 69.8% reduction with S-PRG 1%, 5%, 20% and 30% respectively). Demineralization reduction was not significant with either NaF (15.6% reduction) or 0% S-PRG (-2.5% reduction i.e. 2.5% more demineralization than the Control) when compared to control group. Mineral loss assessed using TMR followed a similar trend as fluorescence loss.

CONCLUSION

Toothpaste containing S-PRG filler can serve as an effective caries control tool. S-PRG filler-containing dentifrice to be more effective in preventing tooth demineralization than 1100 ppm fluoride provided as sodium fluoride.

Diagnosis and staging of caries using spectral factors derived from the blue laser-induced autofluorescence spectrum

OBJECTIVE

The aim of this study was to identify the factors derived from the 405nm laser-induced autofluorescence (AF) spectra that could be used to diagnose and stage caries.

MATERIALS AND METHODS

Teeth (20 teeth per stage) were classified as sound, stage II, III, and IV based on a visual and tactile inspection. The specimens were re-examined and reclassified based on micro-CT analysis. From the teeth, the AF was obtained using a 405nm laser. Three spectral factors (spectral slope at 550-600nm, area under the curve at 500-590nm, and two-peak ratio between 625 and 667nm) were derived from the AF spectra. Using these factors, the diagnosis and staging of caries were tested, and the results were compared with those of DIAGNOdent.

RESULTS

After micro-CT analysis, only 13, 11, and 13 teeth were reclassified as stages II, III, and IV, respectively. The reclassified groups showed less data overlap between the stages, and the spectral slope was 40.1-74.6, 27.5-39.6, 11.1-27.4, and 1.0-9.7 for sound, stage II, III, and IV, respectively. The differentiation of stages III and IV using DIAGNOdent appeared to be difficult due to the considerable data overlap.

CONCLUSION

Among the factors tested, the spectral slope at 550-600nm showed the best match with the caries specimens, in which their stage had been identified precisely.

CLINICAL SIGNIFICANCE

The 405nm laser-induced AF spectra can be applied to the diagnosis and staging of caries alone or in conjunction with conventional methods, such as visual, tactile, and X-ray inspection.

Antibacterial photodynamic therapy with curcumin and Curcuma xanthorrhiza extract against Streptococcus mutans

BACKGROUND

Bacteria are becoming increasingly resistant to conventional antibacterial chemotherapy. This has prompted the application of antibacterial photodynamic therapy (aPDT) in bacteria-related diseases due to its excellent biocide effects. However, few studies have attempted to develop a novel photosensitizer based on natural components. The aim of the present study was to compare the aPDT effects of curcumin and Curcuma xanthorrhiza extract (CXE) against Streptococcus mutans.

METHODS

A planktonic suspension containing an S. mutans strain was treated in three separate groups: aPDT with curcumin, CXE, and a mixture of curcumin and CXE (ratio= 1:1) at concentrations of 0, 10, 10², 10³, and 10⁴ng/ml. Light irradiation with a center wavelength of 405nm was applied using an LED (power density of 84.5mW for 300s at an energy density of 25.3J/cm²). The phototoxicity of photosensitizers against S. mutans was investigated using a colony-forming-unit assay. Percentage logarithmic reductions [log₁₀(CFU/ml) values] were analyzed using one-way ANOVA followed by the Tukey test (p<0.05) and Student's independent t-test.

RESULTS

The viability of S. mutans in the presence of curcumin, CXE, and a mixture of these two components was substantially reduced during irradiation with 405nm light. The phototoxicity of the photosensitizer varied with its solubility and concentration.

CONCLUSION

These preliminary in vitro findings imply that combining curcumin and CXE with a 405nm LED may be a novel method of applying aPDT. This could be advantageous in preventing and treating dental caries using devices that are readily available in clinics.

Techniques to Evaluate Dental Erosion: A Systematic Review of Literature

This article reviews different techniques for evaluating dental erosion, weighs the advantages and disadvantages of these techniques, and presents the latest trends in the study of dental erosion. In May 2014, an initial search was carried out in the PubMed/MEDLINE database of indexed journals from 1975 to 2013 using the following keywords: dental erosion; dental erosion In-vitro; and dental erosion in-vivo. Bibliographic citations from the papers found were then used to find other useful sources. The authors categorize the techniques into three classes: in-vitro, in-vivo and in-vitro/in-vivo. The article discusses the instrumentation required to use each of these techniques, as well as their rationale, merits and applications. The emergence of in-vitro/in-vivo techniques offers the potential to accurately quantify tooth wear in clinical situations. Cross-sectional as well as longitudinal studies show that these techniques will improve diagnosis, treatment planning and management of dental erosion.

Trimodal detection of early childhood caries using laser light scanning and fluorescence spectroscopy: clinical prototype

There is currently a need for a safe and effective way to detect and diagnose early stages of childhood caries. A multimodal optical clinical prototype for diagnosing caries demineralization in vivo has been developed. The device can be used to quickly image and screen for any signs of demineralized enamel by obtaining high-resolution and high-contrast surface images using a 405-nm laser as the illumination source, as well as obtaining autofluorescence and bacterial fluorescence images. When a suspicious region of demineralization is located, the device also performs dual laser fluorescence spectroscopy using 405- and 532-nm laser excitation. An autofluorescence ratio of the two excitation lasers is computed and used to quantitatively diagnose enamel health. The device was tested on five patients in vivo as well as on 28 extracted teeth with clinically diagnosed carious lesions. The device was able to provide detailed images that highlighted the lesions identified by the clinicians. The autofluorescence spectroscopic ratios obtained from the extracted teeth successfully quantitatively discriminated between sound and demineralized enamel.

Evaluating the use of fluorescent imaging for the quantification of dental fluorosis

BACKGROUND

The quantification of fluorosis using fluorescence imaging (QLF) hardware and stain analysis software has been demonstrated in selected populations with good correlation between fluorescent image metrics and TF Index scores from photographs. The aim of this study was to evaluate the ability of QLF to quantify fluorosis in a population of subjects (aged 11-13) participating in an epidemiological caries and fluorosis survey in fluoridated and non-fluoridated communities in Northern England.

METHODS

Fluorescent images of the maxillary incisors were captured together with standardized photographs were scored blind for fluorosis using the TF Index. Subjects were excluded from the analysis if there were restorations or caries on the maxillary central incisors.

RESULTS

Data were available for 1774 subjects (n=905 Newcastle, n=869 Manchester). The data from the fluorescence method demonstrated a significant correlation with TF Index scores from photographs (Kendall's tau = 0.332 p<0.0001). However, a number of additional confounding factors such as the presence of extrinsic stain or increased enamel translucency on some subjects without fluorosis or at low levels of fluorosis severity had an adverse impact on tooth fluorescence and hence the outcome variable. This in conjunction with an uneven distribution of subjects across the range of fluorosis presentations may have resulted in the lower than anticipated correlations between the fluorescent imaging metrics and the photographic fluorosis scores. Nevertheless, the fluorescence imaging technique was able to discriminate between a fluoridated and non-fluoridated population (p<0.001).

CONCLUSIONS

Despite confounding factors the fluorescence imaging system may provide a useful objective, blinded system for the assessment of enamel fluorosis when used adjunctively with photographic scoring.

Efficacy of different strategies in protecting enamel against demineralization during fixed orthodontic treatment

BACKGROUND AND OBJECTIVE

Sealant application is a common strategy for preventing enamel demineralization during multibracket treatment. The aim of this study was to assess the efficacy in enamel demineralization prevention of two fluoride-containing enamel varnishes compared to a non-fluoride varnish, weekly fluoride gel application, and a non-treated control group.

MATERIALS AND METHODS

Enamel specimens obtained from 75 human upper permanent incisors were randomly allocated to five trial groups (each n = 15): A), ProSeal (Reliance), B), Maximum Cure® (Reliance), C), CervitecPlus (Ivoclar Vivadent, Schaan, Liechtenstein), D) elmex® gelée (GABA, Lörrach, Germany), and E), a non-treated control group. Groups A-C received a baseline varnish application, whereas group D specimens received a once weekly gel application for 2 min. Six demineralization cycles per day were carried out for 5 min each using 0.05 M citric acid, with the specimens stored in remineralization solution between cycles. Lesion depth expressed in percentage fluorescence loss (Δ-F in %) compared to baseline (T0) was assessed quantitatively with light-induced fluorescence (QLF) after 3 (T1), 7 (T2), 14 (T3), and 30 (T4) days globally and for each time point, and analyzed for compounds using the Kruskal-Wallis test (α = 5%), and additional one-sample Wilcoxon tests for each time/compound combination (Bonferroni-corrected α-levels α* = 0.05/4 = 0.0125).

RESULTS

Significant fluorescence loss revealing greater lesion depth was detected in the untreated controls (E) at T3, and in groups A (ProSeal) and C (CervitecPlus) at T4. No significant Δ-F changes were seen in the specimens from groups B (Maximum Cure®) and D (elmex® gelée).

CONCLUSION

Maximum Cure® sealant seems to offer efficient protection against demineralization during fixed orthodontic treatment, as does weekly application of elmex® fluoride gel.

Clinical studies of dental erosion and erosive wear

We define erosion as a partial demineralisation of enamel or dentine by intrinsic or extrinsic acids and erosive tooth wear as the accelerated loss of dental hard tissue through the combined effect of erosion and mechanical wear (abrasion and attrition) on the tooth surface. Most experts believe that during the last decade there has been a significant increase in the prevalence and severity of erosive tooth wear, particularly in adolescents. Even when erosive wear occurs in its milder forms, this is a matter of concern, as it may compromise the integrity of an otherwise healthy dentition in later life. The erosive wear process is complicated and modified by many chemical, behavioural and associated processes in the mouth. If interventions are to be developed it is therefore important that in vivo methods are developed to assess the outcomes of the erosion and erosive wear processes and the effects of interventions upon them. This paper discusses potential methods of investigating erosion and erosive wear in vivo and the difficulties associated with clinical studies.

Fiber optic backscatter spectroscopic sensor to monitor enamel demineralization and remineralization in vitro

In this study, a Fiber Optic Backscatter Spectroscopic Sensor (FOBSS) is used to monitor demineralization and remineralization induced changes in the enamel. A bifurcated fiber optic backscatter probe connected to a visible light source and a high resolution spectrophotometer was used to acquire the backscatter light spectrum from the tooth surface. The experiments were conducted in two parts. In Part 1, experiments were carried out using fiber optic backscatter spectroscopy on (1) sound enamel and dentine sections and (2) sound tooth specimens subjected to demineralization and remineralization. In Part 2, polarization microscopy was conducted to examine the depth of demineralization in tooth specimens. The enamel and dentine specimens from the Part-1 experiments showed distinct backscatter spectra. The spectrum obtained from the enamel-dentine combination and the spectrum generated from the average of the enamel and dentine spectral values were closely similar and showed characteristics of dentine. The experiments in Part 2 showed that demineralization and remineralization processes induced a linear decrease and linear increase in the backscatter light intensity respectively. A negative correlation between the decrease in the backscatter light intensity during demineralization and the depth of demineralization determined using the polarization microscopy was calculated to be p = -0.994. This in vitro experiment highlights the potential benefit of using FOBSS to detect demineralization and remineralization of enamel.

Characterisation of enamel white spot lesions using X-ray micro-tomography

OBJECTIVES

The aim of this study was to characterise the mineral density (MD) of natural enamel white spot lesions (WSLs) using X-ray micro-tomography calibrated with different density hydroxyapatite phantoms.

METHODS

Seven natural WSLs from four extracted non-carious premolar teeth were scanned at a voxel size of 7.6 microm using a desktop X-ray micro-tomography system. Five hydroxyapatite phantoms (sintered pellets of hydroxyapatite powder) with densities ranging from 1.52 to 3.14 g/cm(3) were used as calibration standards for each scan. Three-dimensional image reconstruction enabled MD gradients throughout the lesion to be quantified using an MD calibration equation derived from hydroxyapatite phantoms. Background noise generated during the measurement of MD was reduced using a Gaussian filter.

RESULTS

Gaussian filter reduced the signal-to-noise ratio (standard deviation) significantly while the basic MD information (average value) remained intact. The mineral gradients through the WSLs examined were compared and are discussed in terms of existing literature. The MD of sound enamel, apparent intact surface layer of WSL, and lowest level of WSL was found to be 2.65-2.89 g/cm(3), 2.23-2.58 g/cm(3) and 1.48-2.03 g/cm(3), respectively. Our MD results are comparable with other studies.

CONCLUSIONS

X-ray micro-tomography is a sensitive in vitro technique capable of characterising and quantifying MD of small non-cavitated WSLs. This method has a promising potential for future carious and quantitative remineralisation studies.

In vitro quantitative light-induced fluorescence to measure changes in enamel mineralization

A sensitive, quantitative method for investigating changes in enamel mineralization of specimens subjected to in vitro or in situ experimentation is presented. The fluorescence-detecting instrument integrates a Xenon arc light source and an object positioning stage, which makes it particularly suitable for the nondestructive assessment of demineralized or remineralized enamel. We demonstrate the ability of in vitro quantitative light-induced fluorescence (QLF) to quantify changes in mineralization of bovine enamel discs that had been exposed in vitro to a demineralizing gel (n=36) or biofilm-mediated demineralization challenges (n=10), or were carried in situ by three volunteers during a 10-day experiment (n=12). Further experiments show the technique's value for monitoring the extent of remineralization in 36 specimens exposed in vitro to oral multispecies biofilms and document the repeatability of in vitro QLF measurements (n=10) under standardized assay conditions. The validity of the method is illustrated by comparison with transversal microradiography (TMR), the invasive current gold standard for assessing experimental changes in enamel mineralization. Ten discs with 22 measurement areas for comparison demonstrated a positive correlation between TMR and QLF (r=0.82). Filling a technological gap, this QLF system is a promising tool to assay in vitro nondestructively localized changes in mineralization of enamel specimens.

A New in vivo Method for Measuring Caries Activity Using Quantitative Light-Induced Fluorescence

The aim of this in vivo study was to assess the association between caries prevalence and activity parameters and the properties of etched sites measured with quantitative light-induced fluorescence (QLF). In a clinical method, two areas of a deciduous tooth were etched in each of 44 children (mean age 8.23 years+/-1.45) with 36% phosphoric acid gel for 1 min and 4 min, respectively. DeltaQ of the etched site was measured immediately after the etching (DeltaQ1) and 24 h later (DeltaQ2) with QLF. In addition, deft/DMFT, approximal plaque (API), bleeding on probing (mod. PBI), active carious lesions and currently used fluorides were recorded. In a regression analysis for the deft, the use of fluoridated salt (standardized coefficient SC=-0.25) and fluoride gel (SC=-0.37) showed the greatest effect, as did the fluoride gel (SC=-0.26) and gingival bleeding (SC=0.50) for the number of active carious lesions. The deft and the number of active carious lesions correlated significantly (r=0.70, p<0.001). DeltaQ1 and DeltaQ2 showed a significant statistical correlation with the age-adjusted deft (0.39<r<0.52, p<0.01) and with the number of active lesions (0.42<r<0.59, p<0.01). Correlations between DeltaQ and the API, PBI and the fluoride scores were slightly weaker but also statistically significant. In a principal-component analysis, these parameters were approximately identical, indicating a strong relationship between the different variables and DeltaQ. This relationship was especially strong for the deft and the active carious lesion scores. In conclusion, these data suggest that the degree of demineralization by etching and its changes with time are associated with caries activity and that this method might be used for the early assessment of caries activity.