Relationship of bone utilization and biomechanical competence in hominoid mandibles

Ontogenetic biomechanics of tufted (Sapajus) and untufted (Cebus) capuchin mandibles

OBJECTIVES

Cortical bone geometry is commonly used to investigate biomechanical properties of primate mandibles. However, the ontogeny of these properties is less understood. Here we investigate changes in cortical bone cross-sectional properties throughout capuchin ontogeny and compare captive versus wild, semi-provisioned groups. Tufted capuchins (Sapajus spp.) are known to consume relatively hard/tough foods, while untufted capuchins (Cebus spp.) exploit less mechanically challenging foods. Previous research indicates dietary differences are present early in development and adult Sapajus mandibles can resist higher bending/shear/torsional loads.

MATERIALS AND METHODS

This study utilized microCT scans of 22 Cebus and 45 Sapajus from early infancy to adulthood from three sample populations: one captive Cebus, one captive Sapajus, and one semi-provisioned, free-ranging Sapajus. Mandibular cross-sectional properties were calculated at the symphysis, P3, and M1. If the tooth had not erupted, its position within the crypt was used. A series of one-way ANOVAs were performed to assess differences between and within the sample populations.

RESULTS

Mandible robusticity increases across ontogeny for all three sample populations. Sapajus were better able to withstand bending and torsional loading even early in ontogeny, but no difference in shear resistance was found. Semi-provisioned, free-ranging Sapajus tend to show increased abilities to resist bending and torsional loading but not shear loading compared to captive Sapajus.

DISCUSSION

This study helps advance our understanding of the primate masticatory system development and opens the door for further studies into adaptive plasticity in shaping the masticatory apparatus of capuchins and differences in captive versus free-ranging sample populations.

Sexual Dimorphism and Divergent Evolutionary Pathways in Primate Cranial Biomechanics: Insights From a Theoretical Morphology Framework

The mammalian order Primates is known for widespread sexual dimorphism in size and phenotype. Despite repeated speculation that primate sexual size dimorphism either facilitates or is in part driven by functional differences in how males and females interact with their environments, few studies have directly assessed the influence of sexual dimorphism on performance traits. Here, we use a theoretical morphology framework to show that sexual dimorphism in primate crania is associated with divergent biomechanical performance traits. The degree of dimorphism is a significant covariate in biomechanical trait divergence between sexes. Males exhibit less efficient but stiffer cranial shapes and significant evolutionary allometry in biomechanical performance, whereas females maintain performance stability across their size spectrum. Evolutionary rates are elevated for efficiency in females whereas males emphasize size-dependent cranial stiffness. These findings support a hypothesis of sex-linked bifurcation in masticatory system performance: larger male crania and faster size evolution partially compensate for low efficiency and reflect a de-emphasis of mechanical leverage, whereas female crania maintain higher mechanical efficiency overall and evolve more rapidly in molar-based masticatory performance. The evolutionary checks-and-balances between size dimorphism and cranial mechanical performance may be a more important driver of primate phenotypic evolution than has been hitherto appreciated.

How geographical origin and dietary habits interact with the shape of cortical mandibular sections? A geometric morphometrics study in an archaeological context

OBJECTIVE

Mandibular shape is strongly influenced by biomechanics, particularly during dietary shifts that often occurred in past populations. The relationship is considered extremely complex as development of the mandible is a multifactorial process. Since cortical bone distribution is purportedly more biomechanically sensitive than external shape, comparison of its distribution in past populations can provide new input to understand this complex relationship. The present study examined the effects of geographical origin and dietary habits on the internal anatomy of the mandibular corpus and symphysis.

DESIGN

A morphometric analysis was conducted on 72 mandibles from different populations, sampled by their geographical origin and subsistence strategies. Procrustes ANOVAs were performed to test the impact of section-plane location, geographical origin, and dietary habits on the groups' shapes.

RESULTS

The specimens' geographical origin and dietary habits had a significant effect on the shapes of the sections (Generalized Goodall F-test, F = 3.2745, df = 6, 304: p < 0.001 and F = 3.7007, df = 4, 306: p < 0.001).

CONCLUSION

Geographical origin and dietary habits influenced the shape of the mandibular sections in our sample. These relationships become more complex when analysed in isolated sections. Indeed, this study revealed that symphysis sections could be predominantly influenced by individual variables, whereas intermediate sections of the corpus could be predominantly influenced by populational variables. Future studies could focus on specific sections to better identify the specific "rules of dependence" in each cross-section.

The cranial biomechanics and feeding performance of Homo floresiensis

Homo floresiensis is a small-bodied hominin from Flores, Indonesia, that exhibits plesiomorphic dentognathic features, including large premolars and a robust mandible, aspects of which have been considered australopith-like. However, relative to australopith species, H. floresiensis exhibits reduced molar size and a cranium with diminutive midfacial dimensions similar to those of later Homo, suggesting a reduction in the frequency of forceful biting behaviours. Our study uses finite-element analysis to examine the feeding biomechanics of the H. floresiensis cranium. We simulate premolar (P³) and molar (M²) biting in a finite-element model (FEM) of the H. floresiensis holotype cranium (LB1) and compare the mechanical results with FEMs of chimpanzees, modern humans and a sample of australopiths (MH1, Sts 5, OH5). With few exceptions, strain magnitudes in LB1 resemble elevated levels observed in modern Homo. Our analysis of LB1 suggests that H. floresiensis could produce bite forces with high mechanical efficiency, but was subject to tensile jaw joint reaction forces during molar biting, which perhaps constrained maximum postcanine bite force production. The inferred feeding biomechanics of H. floresiensis closely resemble modern humans, suggesting that this pattern may have been present in the last common ancestor of Homo sapiens and H. floresiensis.

Ingestive behaviors in bearded capuchins (Sapajus libidinosus)

The biomechanical and adaptive significance of variation in craniodental and mandibular morphology in fossil hominins is not always clear, at least in part because of a poor understanding of how different feeding behaviors impact feeding system design (form–function relationships). While laboratory studies suggest that ingestive behaviors produce variable loading, stress, and strain regimes in the cranium and mandible, understanding the relative importance of these behaviors for feeding system design requires data on their use in wild populations. Here we assess the frequencies and durations of manual, ingestive, and masticatory behaviors from more than 1400 observations of feeding behaviors video-recorded in a wild population of bearded capuchins (Sapajus libidinosus) at Fazenda Boa Vista in Piauí, Brazil. Our results suggest that ingestive behaviors in wild Sapajus libidinosus were used for a range of food material properties and typically performed using the anterior dentition. Coupled with previous laboratory work indicating that ingestive behaviors are associated with higher mandibular strain magnitudes than mastication, these results suggest that ingestive behaviors may play an important role in craniodental and mandibular design in capuchins and may be reflected in robust adaptations in fossil hominins.

Biomechanics of the mandible of Macaca mulatta during the power stroke of mastication: Loading, deformation, and strain regimes and the impact of food type

Mandible morphology has yet to yield definitive information on primate diet, probably because of poor understanding of mandibular loading and strain regimes, and overreliance on simple beam models of mandibular mechanics. We used a finite element model of a macaque mandible to test hypotheses about mandibular loading and strain regimes and relate variation in muscle activity during chewing on different foods to variation in strain regimes. The balancing-side corpus is loaded primarily by sagittal shear forces and sagittal bending moments. On the working side, sagittal bending moments, anteroposterior twisting moments, and lateral transverse bending moments all reach similar maxima below the bite point; sagittal shear is the dominant loading regime behind the bite point; and the corpus is twisted such that the mandibular base is inverted. In the symphyseal region, the predominant loading regimes are lateral transverse bending and negative twisting about a mediolateral axis. Compared with grape and dried fruit chewing, nut chewing is associated with larger sagittal and transverse bending moments acting on balancing- and working-side mandibles, larger sagittal shear on the working side, and larger twisting moments about vertical and transverse axes in the symphyseal region. Nut chewing is also associated with higher minimum principal strain magnitudes in the balancing-side posterior ramus; higher sagittal shear strain magnitudes in the working-side buccal alveolar process and the balancing-side oblique line, recessus mandibulae, and endocondylar ridge; and higher transverse shear strains in the symphyseal region, the balancing-side medial prominence, and the balancing-side endocondylar ridge. The largest food-related differences in maximum principal and transverse shear strain magnitudes are in the transverse tori and in the balancing-side medial prominence, extramolar sulcus, oblique line, and endocondylar ridge. Food effects on the strain regime are most salient in areas not traditionally investigated, suggesting that studies seeking dietary effects on mandible morphology might be looking in the wrong places.

Symphyseal surface strain during in vitro human mandibular wishboning

OBJECTIVES

This research theoretically models and empirically records symphyseal surface strain during in vitro human mandibular wishboning (lateral transverse bending) in order to test one aspect of the hypothesis that the chin is an adaptive response to masticatory stresses. From a perspective of optimality, three questions were tested: 1) Do human mandibles function as curved beams during wishboning? 2) Is the presence of a chin associated with lower than predicted curved beam effects? 3) Are there relatively low strain gradients on the lingual and labial symphyseal surfaces respectively?

MATERIALS AND METHODS

Based on morphometric criteria, theoretical wishboning strains were calculated for five dentate adult human mandibles. The same mandibles were fitted with strain gauges and subjected to simulated wishboning loads. From the empirically-recorded strains, relative strains were calculated by dividing all strains by the absolute lowest strain in a given specimen. The theoretical and empirical results were compared in order to address the three related questions guiding this research.

RESULTS

Human mandibles behave as curved beams during wishboning (question 1). Empirical strain measures showed greater disparity both between and within the labial and lingual symphyseal surfaces than the theoretical models predictions (questions 2 and 3).

DISCUSSION

Human symphyseal form, with its distinctive chin, is unlikely to be adapted for countering wishboning loads. Chins are associated with larger than expected strain gradients within and between symphyseal surfaces, which runs counter to the optimality criterion typically invoked in assessing trait performance for signs of adaptation. The implications are twofold: 1) wishboning may not, in fact, be a regular feature of human mastication or 2) wishboning may not pose the same structural risks in human jaws as this load does in other anthropoid primates.

The ontogeny of the chin: an analysis of allometric and biomechanical scaling

The presence of a prominent chin in modern humans has been viewed by some researchers as an architectural adaptation to buttress the anterior corpus from bending stresses during mastication. In contrast, ontogenetic studies of mandibular symphyseal form suggest that a prominent chin results from the complex spatial interaction between the symphysis and surrounding soft tissue and skeletal anatomy during development. While variation in chin prominence is clearly influenced by differential growth and spatial constraints, it is unclear to what degree these developmental dynamics influence the mechanical properties of the symphysis. That is, do ontogenetic changes in symphyseal shape result in increased symphyseal bending resistance? We examined ontogenetic changes in the mechanical properties and shape of the symphysis using subjects from a longitudinal cephalometric growth study with ages ranging from 3 to 20+ years. We first examined whether ontogenetic changes in symphyseal shape were correlated with symphyseal vertical bending and wishboning resistance using multivariate regression. Secondly, we examined ontogenetic scaling of bending resistance relative to bending moment arm lengths. An ontogenetic increase in chin prominence was associated with decreased vertical bending resistance, while wishboning resistance was uncorrelated with ontogenetic development of the chin. Relative to bending moment arm lengths, vertical bending resistance scaled with significant negative allometry whereas wishboning resistance scaled isometrically. These results suggest a complex interaction between symphyseal ontogeny and bending resistance, and indicate that ontogenetic increases in chin projection do not provide greater bending resistance to the mandibular symphysis.

Protuberance or fossa on the lateral surface of the mandible in primates

In order to clarify the morphological characteristics and function of the protuberance and/or fossa on the lateral surface of the mandible, we examined 778 mandibles of 9 genera, 19 species of non-human primates. Both protuberance and fossa were found in Macaca, Chlorocebus, and Cercocebus at frequencies ranging from 0% to 60%. The protuberance was composed of compact bone and was similar to the mandibular torus in humans. A well-developed protuberance extended from the fourth premolar to third molar region, and was situated at the central part of the mandibular body, or continued on the oblique line. Sometimes the protuberance localized on the mandibular base. A deep and large fossa was found in all individuals of Papio, Theropithecus, and Mandrillus, and the bone width was thin in the center of the fossa. The fossa extended from the third premolar to the second molar region, and the deepest area was the first molar region. In Macaca, Chlorocebus, and Cercocebus, the curvature of the external table of the mandible created a fossa. In Colobus, and Hylobates, the external surface of the mandible looked concave because of the thickened mandibular base. These concavo-convex structures have some biological functions and represent an adaptive change for mastication.

Mandibular morphology in two archaeological human skeletal samples from northwest Europe with different masticatory regimes

Mandibular morphology, assessed osteometrically, is studied in two historic human skeletal series (N = 64 individuals) from northwest Europe, one from Zwolle, the Netherlands (19th century CE), the other from Wharram Percy, England (10th-19th century). Both groups show greater dental wear than modern Western populations, but the rate of wear is greater at Wharram Percy than at Zwolle, suggesting a more vigorous masticatory regime. The aim is to evaluate any differences in mandibular morphology between the two groups that might relate to the inferred difference in biomechanical loading upon the chewing apparatus consequent upon the different physical properties of the diets consumed. Results indicate that the mandibles from Zwolle are generally smaller than those from Wharram Percy, especially in the gonial and ramus region and in the height of the post-canine corpus. These differences are consistent with those predicted on biomechanical grounds. That clear differences were observed in two samples whose masticatory regimes were distinct but not very different is an indication of the sensitivity of mandibular morphology to biomechanical input, and supports its value for investigating differences in physical properties of diets in palaeopopulations.

Geometric properties and comparative biomechanics of Homo floresiensis mandibles

The hypodigm of Homo floresiensis from the cave of Liang Bua on Flores Island in the archipelago of Indonesia includes two mandibles (LB1/2 and LB6/1). The morphology of their symphyses and corpora has been described as sharing similarities with both australopiths and early Homo despite their Late Pleistocene age. Although detailed morphological comparisons of these mandibles with those of modern and fossil hominin taxa have been made, a functional analysis in the context of masticatory biomechanics has yet to be performed. Utilizing data on cortical bone geometry from computed tomography scans, we compare the mechanical attributes of the LB1 and LB6 mandibles with samples of modern Homo, Pan, Pongo, and Gorilla, as well as fossil samples of Paranthropus robustus, Australopithecus africanus and South African early Homo. Structural stiffness measures were derived from the geometric data to provide relative measures of mandibular corpus strength under hypothesized masticatory loading regimes. These mechanical variables were evaluated relative to bone area, mandibular length and estimates of body size to assess their functional affinities and to test the hypothesis that the Liang Bua mandibles can be described as scaled-down variants of either early hominins or modern humans. Relative to modern hominoids, the H. floresiensis material appears to be relatively strong in terms of rigidity in torsion and transverse bending, but is relatively weak under parasagittal bending. Thus, they are 'robust' relative to modern humans (and comparable with australopiths) under some loads but not others. Neither LB1 nor LB6 can be described simply as 'miniaturized' versions of modern human jaws since mandible length is more or less equivalent in Homo sapiens and H. floresiensis. The mechanical attributes of the Liang Bua mandibles are consistent with previous inferences that masticatory loads were reduced relative to australopiths but remained elevated relative to modern Homo.

Functional and morphological correlates of mandibular symphyseal form in a living human sample

Variation in recent human mandibular form is often thought to reflect differences in masticatory behavior associated with variation in food preparation and subsistence strategies. Nevertheless, while mandibular variation in some human comparisons appear to reflect differences in functional loading, other comparisons indicate that this relationship is not universal. This suggests that morphological variation in the mandible is influenced by other factors that may obscure the effects of loading on mandibular form. It is likely that highly strained mandibular regions, including the corpus, are influenced by well-established patterns of lower facial skeletal integration. As such, it is unclear to what degree mandibular form reflects localized stresses incurred during mastication vs. a larger set of correlated features that may influence bone distribution patterns. In this study, we examine the relationship between mandibular symphyseal bone distribution (i.e., second moments of area, cortical bone area) and masticatory force production (i.e., in vivo maximal bite force magnitude and estimated symphyseal bending forces) along with lower facial shape variation in a sample of n = 20 living human male subjects. Our results indicate that while some aspects of symphyseal form (e.g., wishboning resistance) are significantly correlated with estimates of symphyseal bending force magnitude, others (i.e., vertical bending resistance) are more closely tied to variation in lower facial shape. This suggests that while the symphysis reflects variation in some variables related to functional loading, the complex and multifactorial influences on symphyseal form underscores the importance of exercising caution when inferring function from the mandible especially in narrow taxonomic comparisons.

Timing of ectocranial suture activity in Gorilla gorilla as related to cranial volume and dental eruption

Research has shown that Pan and Homo have similar ectocranial suture synostosis patterns and a similar suture ontogeny (relative timing of suture fusion during the species ontogeny). This ontogeny includes patency during and after neurocranial expansion with a delayed bony response associated with adaptation to biomechanical forces generated by mastication. Here we investigate these relationships for Gorilla by examining the association among ectocranial suture morphology, cranial volume (as a proxy for neurocranial expansion) and dental development (as a proxy for the length of time that it has been masticating hard foods and exerting such strains on the cranial vault) in a large sample of Gorilla gorilla skulls. Two-hundred and fifty-five Gorilla gorilla skulls were examined for ectocranial suture closure status, cranial volume and dental eruption. Regression models were calculated for cranial volumes by suture activity, and Kendall's tau (a non-parametric measure of association) was calculated for dental eruption status by suture activity. Results suggest that, as reported for Pan and Homo, neurocranial expansion precedes suture synostosis activity. Here, Gorilla was shown to have a strong relationship between dental development and suture activity (synostosis). These data are suggestive of suture fusion extending further into ontogeny than brain expansion, similar to Homo and Pan. This finding allows for the possibility that masticatory forces influence ectocranial suture morphology.

Interindividual variation in functionally adapted trait sets is established during postnatal growth and predictable based on bone robustness

Adults acquire unique sets of morphological and tissue-quality bone traits that are predictable based on robustness and deterministic of strength and fragility. How and when individual trait sets arise during growth has not been established. Longitudinal structural changes of the metacarpal diaphysis were measured for boys and girls from 3 mo to 8 yr of age using hand radiographs obtained from the Bolton-Brush collection. Robustness varied approximately 2-fold among boys and girls, and individual values were established by 2 yr of age, indicating that genetic and environmental factors controlling the relationship between growth in width and growth in length were established early during postnatal growth. Significant negative correlations between robustness and relative cortical area and a significant positive correlation between robustness and a novel measure capturing the efficiency of growth indicated that coordination of the subperiosteal and endocortical surfaces was responsible for this population acquiring a narrow range of trait sets that was predictable based on robustness. Boys and girls with robust diaphyses had proportionally thinner cortices to minimize mass, whereas children with slender diaphyses had proportionally thicker cortices to maximize stiffness. Girls had more slender metacarpals with proportionally thicker cortices compared with boys at all prepubertal ages. Although postnatal growth patterns varied in fundamentally different ways with sex and robustness, the dependence of trait sets on robustness indicated that children sustained variants affecting subperiosteal growth because they shared a common biological factor regulating functional adaptation. Considering the natural variation in acquired trait sets may help identify determinants of fracture risk, because age-related bone loss and gain will affect slender and robust structures differently.

Growth-related changes in prehistoric Jomon and modern Japanese mandibles with emphasis on cortical bone distribution

Cortical bone distribution of the anthropoid mandibular symphysis has been addressed in relation to mechanical stress generated by mastication. To examine whether or not bone mass and distribution patterns of the human mandibular symphysis could be interpreted as an example of functional adaptation, we compared the skeletal growth series of two populations, prehistoric Jomon, considered to represent a "robust" mandibular morphology associated with a presumed heavier masticatory load, and modern Japanese. Results showed that the adult Jomon symphysis possessed significantly greater bone mass and thicker cortical bone compared to the modern Japanese condition. However, the second moments of area did not differ significantly between the two, indicating comparable rigidity against bending. Furthermore, the Jomon mandibles of the infant to juvenile stages exhibited most of the adult characteristics, in both bone mass/distribution of the symphysis and in mandibular corpus/ramus morphologies. The present study also demonstrated the presence of a growth pattern of symphyseal cortical thickness, common to both the Jomon and the modern Japanese series. In both populations, subsequent to deciduous molar occlusion, cortical bone tends to be thickest at the inferolingual symphysis, at the location where the highest tensile stresses presumably occur during mastication. These findings suggest that the "robust" characteristics of the Jomon mandible are initially manifested early in development, and that the effect of mechanical stimulus to bone mass formation in the human symphysis is largely confined to a regulatory role during growth modeling.