Effects of mechanical vibration on proliferation and osteogenic differentiation of human periodontal ligament stem cells

Effect of compressive force combined with vibration on CCL2 and CCL5 in human periodontal ligament cells

Purpose

To investigate the effect of compressive force combined with vibration on expression of CC-chemokine ligand 2 (CCL2) and 5 (CCL5) in human periodontal ligament (hPDL) cells.

Methods

Human PDL cells were cultured and assigned into four groups: control (Con), compressive force 2.0 g/cm2 for 24 h and 48 h (C), vibration 0.3 g 30 Hz for 20 min every 24 h (V), and compressive force combined with vibration (VC). At 24 h and 48 h, mRNA and protein levels of CCL2 and CCL5 were examined by quantitative reverse transcription polymerase chain reaction (qRT-PCR) and enzyme-linked immunosorbent assay (ELISA), respectively.

Results

At 24 h and 48 h, CCL2 mRNA and protein levels in C and VC were significantly higher than Con. At 24 h, VC showed significantly higher CCL2 mRNA expression than C. However, there was no significant difference between CCL2 protein in C and VC at both time points. At 24 h and 48 h, CCL5 mRNA expression was significantly down-regulated in V and VC, whereas CCL5 protein was undetectable in all groups.

Conclusions

Application of compressive force combined with vibration resulted in the upregulation of CCL2 mRNA and protein levels, whereas CCL5 mRNA expression was down-regulated.

The gingival crevicular fluid biomarkers with micropulse vibration device: A pilot study

Purpose

The aim of this study is to investigate the impact of vibration stimulation on gingival crevicular fluid biomarkers and orthodontic tooth movement.

Methods

Forty patients were randomly assigned to receive therapy with an intraoral vibration device (n = 20, AcceleDent®) or no treatment (n = 20) at a university orthodontic clinic. The quantity of fluid in the gingival sulcus, biomarkers of each fluid in the gingival sulcus, and orthodontic tooth movement were analyzed at three-time intervals (T1, T2, T3) before and after therapy (T0).

Results

The results showed that vibration treatment led to higher levels of osteoclast biomarkers (RNAKL, RANKL/OPG) and inflammatory biomarkers (TNF-, IL-11, IL-18) compared to the control group. Additionally, vibration treatment at T1, T2, and T3 significantly improved tooth mobility and GCF volume. The gingival crevicular fluid biomarker levels of the T0, T1, and T2 vibration groups, as well as IL-11, IL-18, TGF-1, and TNF-α vibration groups, were significantly higher than those of the control group at different time points.

Conclusion

vibration therapy was found to be closely associated with bone-breaking cells and inflammatory factor levels.

Development and Characterization of a low intensity vibrational system for microgravity studies

The advent of extended-duration human spaceflight demands a better comprehension of the physiological impacts of microgravity. One primary concern is the adverse impact on the musculoskeletal system, including muscle atrophy and bone density reduction. Ground-based microgravity simulations have provided insights, with vibrational bioreactors emerging as potential mitigators of these negative effects. Despite the potential they have, the adaptation of vibrational bioreactors for space remains unfulfilled, resulting in a significant gap in microgravity research. This paper introduces the first automated low-intensity vibrational (LIV) bioreactor designed specifically for the International Space Station (ISS) environment. Our research covers the bioreactor's design and characterization, the selection of an optimal linear guide for consistent 1-axis acceleration, a thorough analysis of its thermal and diffusion dynamics, and the pioneering use of BioMed Clear resin for enhanced scaffold design. This advancement sets the stage for more authentic space-based biological studies, vital for ensuring the safety of future space explorations.

Effect of 125 Hz and 150 Hz vibrational frequency electric toothbrushes on the rate of orthodontic tooth movement and prostaglandin E2 levels

Objective

To evaluate the effects of an electric toothbrush with vibrational frequencies of 125 Hz and 150 Hz on the orthodontic tooth movement (OTM) rate and the production of prostaglandin E2 (PGE2).

Methods

Out of thirty patients (aged 18-25 years; 16 females and 14 males), ten patients each formed Group A and B, who used electric toothbrushes with 125 Hz and 150 Hz vibrations, respectively. The remaining ten patients (Group C) served as the control group and did not use electric toothbrushes. The rate of OTM and levels of PGE2 using microcapillary pipettes were calculated before the start of retraction (T0), on the 30th day (T1), on the 60th day (T2), and on the 90th day (T3) from the start of retraction in all the groups.

Results

There was a statistically significant difference in the mean OTM values and PGE2 levels in all three groups at different time intervals, with the maximum difference seen in Group B compared to Group A and least in Group C at T1, T2 and T3.

Conclusions

The rate of OTM and levels of PGE2 were highest in patients who used an electric toothbrush with 150 Hz mechanical vibration compared to those who used an electric toothbrush with 125 Hz mechanical vibration and least in patients who did not use an electric toothbrush. Mechanical vibration led to an increase in the PGE2 levels and accelerated the OTM.

Effect of Mechanical Loading on Bone Regeneration in HA/β-TCP/SF Scaffolds Prepared by Low-Temperature 3D Printing In Vivo

It has been well demonstrated that a dynamic culture environment improves tissue-engineered bone formation in vitro, but little is known about how cyclical mechanical loading induced bone formation in scaffolds in situ. To mimic the organic and inorganic components and multilevel structure of a bony microenvironment, hydroxyapatite/β tricalcium phosphate/silk fibroin(HA/β-TCP/SF) composite scaffolds with macro- and micropores were fabricated in this study. The mechanical properties and structure of the scaffolds were adjusted based on the ratio of organic and inorganic components and three-dimensional (3D) printing parameters. Dynamic sinusoidal loading with different frequencies was applied to the composite scaffold. Mouse bone precursor cells MC3T3-E1 were seeded on the scaffolds, and the cell compatibility of the scaffolds was investigated by MTT, SEM, and HE. The effect of the loading on bone formation in the scaffold in situ was investigated in a rabbit tibia defect model. The scaffold showed viscoelasticity and hysteresis under dynamic sinusoidal loading with different frequencies. With an increase in HA/β-TCP, the stress and modulus of the scaffolds increased. MTT, SEM, and HE results showed that MC3T3-E1 cells could adhere and proliferate on the composite scaffolds. After loading in vivo, the quantity of newly formed bone and the bone volume fraction increased. Micro-CT, undecalcified Van Gieson (VG) staining, and fluorescent double-labeling results suggested that appropriate cyclical mechanical loading at frequencies of 1 and 10 Hz had positive effects on bone formation in situ and it may play a role in clinical bone defect repair.

Vertical Vibration of Mouse Osteoblasts Promotes Cellular Differentiation and Cell Cycle Progression and Induces Aging In Vitro

BACKGROUND

This study aimed to investigate the effect of the vibration of osteoblasts on the cell cycle, cell differentiation, and aging.

MATERIALS AND METHODS

Primary maxilla osteoblasts harvested from eight-week-old mice were subjected to vibration at 3, 30, and 300 Hz once daily for 30 min; control group, 0 Hz. A cell proliferation assay and Cell-Clock Cell Cycle Assay were performed 24 h after vibration. Osteoblast differentiation assay, aging marker genes, SA-β-Gal activity, and telomere length (qPCR) were assayed two weeks post- vibration once every two days.

RESULTS

Cell proliferation increased significantly at 30 and 300 Hz rather than 0 Hz. Several cells were in the late G₂/M stage of the cell cycle at 30 Hz. The osteoblast differentiation assay was significantly higher at 30 Hz than at 0 Hz. Runx2 mRNA was downregulated at 30 Hz compared to that at 0 Hz, while osteopontin, osteocalcin, and sclerostin mRNA were upregulated. p53/p21, p16, and c-fos were activated at 30 Hz. SA-β-Gal activity increased significantly at 30 or 300 Hz. Telomere length was significantly lower at 30 or 300 Hz.

CONCLUSIONS

The results suggest that providing optimal vibration to osteoblasts promotes cell cycle progression and differentiation and induces cell aging.

Effect of stretch frequency on osteogenesis of periodontium during periodontal ligament distraction

OBJECTIVES

Periodontal ligament distraction (PDLD) can accelerate orthodontic tooth movement (OTM). However, the effect of stretch frequency on osseous formation during PDLD remains unclear. Here, we sought to identify the effect of PDLD frequency on the osteogenic remodelling of the periodontium.

MATERIALS AND METHODS

(i) In vitro, five human periodontal ligament stem cell (PDLSC) cultures were randomized to either static conditions or exposure to a cyclic stretch force involving 12% deformation at frequencies of 0.3, 0.5, 0.7 or 1.0 Hz for 12 h, and the osteogenic differentiation of PDLSCs was assessed using Western blotting. (ii) In vivo, 18 beagle dogs underwent orthodontic distalization of bilateral maxillary first premolars. In the test groups, PDLD was performed at a frequency of two or six times/day, while Ni-Ti coil springs were applied to mimic traditional OTM in the control group. The amount of OTM and histological staining was estimated after force loading for 5, 10 and 15 days.

RESULTS

(i) In vitro, the expression of osteogenic-specific markers (runt-related transcription factor 2 [Runx2], type I collagen [COL-I] and osteocalcin [OCN]) increased with the frequency of tensile force, to a peak at 0.7 Hz. (ii) In vivo, both PDLD groups displayed a greater rate of OTM and a higher bone metabolism than the control group. The expression of COL-I and OCN was significantly reinforced in the six times/day-PDLD group in comparison to the two times/day-PDLD group.

CONCLUSIONS

The cyclic stretch force enhances osteogenesis of the periodontium in a frequency-dependent manner.

Periodontal ligament stem cell-based bioactive constructs for bone tissue engineering

Objectives: Stem cell-based tissue engineering approaches are promising for bone repair and regeneration. Periodontal ligament stem cells (PDLSCs) are a promising cell source for tissue engineering, especially for maxillofacial bone and periodontal regeneration. Many studies have shown potent results via PDLSCs in bone regeneration. In this review, we describe recent cutting-edge researches on PDLSC-based bone regeneration and periodontal tissue regeneration. Data and sources: An extensive search of the literature for papers related to PDLSCs-based bioactive constructs for bone tissue engineering was made on the databases of PubMed, Medline and Google Scholar. The papers were selected by three independent calibrated reviewers. Results: Multiple types of materials and scaffolds have been combined with PDLSCs, involving xeno genic bone graft, calcium phosphate materials and polymers. These PDLSC-based constructs exhibit the potential for bone and periodontal tissue regeneration. In addition, various osteo inductive agents and strategies have been applied with PDLSCs, including drugs, biologics, gene therapy, physical stimulation, scaffold modification, cell sheets and co-culture. Conclusoin: This review article demonstrates the great potential of PDLSCs-based bioactive constructs as a promising approach for bone and periodontal tissue regeneration.

Effect of Therapeutic Ultrasound on the Mechanical and Biological Properties of Fibroblasts

Purpose

This paper explores the effect of therapeutic ultrasound on the mechanical and biological properties of ligament fibroblasts.

Methods and Results

We assessed pulsed ultrasound doses of 1.0 and 2.0 W/cm2 at 1 MHz frequency for five days on ligament fibroblasts using a multidisciplinary approach. Atomic force microscopy showed a decrease in cell elastic modulus for both doses, but the treated cells were still viable based on flow cytometry. Finite element method analysis exhibited visible cytoskeleton displacements and decreased harmonics in treated cells. Colorimetric assay revealed increased cell proliferation, while scratch assay showed increased migration at a low dose. Enzyme-linked immunoassay detected increased collagen and fibronectin at a high dose, and immunofluorescence imaging technique visualized β-actin expression for both treatments.

Conclusion

Both doses of ultrasound altered the fibroblast mechanical properties due to cytoskeletal reorganization and enhanced the regenerative and remodeling stages of cell repair.

Lay Summary

Knee ligament injuries are a lesion of the musculoskeletal system frequently diagnosed in active and sedentary lifestyles in young and older populations. Therapeutic ultrasound is a rehabilitation strategy that may lead to the regenerative and remodeling of ligament wound healing. This research demonstrated that pulsed therapeutic ultrasound applied for 5 days reorganized the ligament fibroblasts structure to increase the cell proliferation and migration at a low dose and to increase the releasing proteins that give the stiffness of the healed ligament at a high dose.

Future Works

Future research should further develop and confirm that therapeutic ultrasound may improve the regenerative and remodeling stages of the ligament healing process applied in clinical trials in active and sedentary lifestyles in young and older populations.

Graphical abstract

Intermittent compressive force regulates human periodontal ligament cell behavior via yes-associated protein

Intermittent compressive force influences human periodontal ligament (PDL) cell behavior that facilitates periodontal tissue regeneration. In response to mechanical stimuli, Yes-associated protein (YAP) has been recognized as a mechanosensitive transcriptional activator that regulates cell proliferation and cell fate decisions. This study aimed to investigate whether compressive forces influence cell proliferation and cell fate decisions of human PDL cells via YAP signaling. YAP expression was silenced by shRNA. The effect of YAP on cell proliferation, adipogenesis and osteogenesis of PDL cells under ICF loading were determined. Adipogenic differentiation bias upon ICF loading was confirmed by fourier-transform infrared spectroscopy (FTIR). The results revealed that ICF-induced YAP promotes osteogenesis, but it inhibits adipogenesis in PDL cells. Depletion of YAP results in PDL cells that are irresponsive to ICF and, therefore, the failure of the PDL cells to undergo osteogenic differentiation. This was shown by a significant reduction in calcium deposited in the CF-derived osteoblasts of the YAP-knockdown (YAP-KD) PDL cells. As to control treatment, reduction of YAP promoted adipogenesis, whereas ICF-induced YAP inhibited this mechanism. However, the adipocyte differentiation in YAP-KD cells was not affected upon ICF treatment as the YAP-KD cells still exhibited a better adipogenic differentiation that was unrelated to the ICF. This study demonstrated that, in response to ICF treatment, YAP could be a crucial mechanosensitive transcriptional activator for the regulation of PDL cell behavior through a mechanobiological process. Our results may provide the possibility of facilitating PDL tissue regeneration by manipulation of the Hippo-YAP signaling pathway.

•

YAP plays role as a mechanosensitive transcriptional activator of human PDL cells in response to ICF.

•

ICF activates YAP and its target genes to promote cell proliferation and osteogenic differentiation of human PDL cells.

•

Loss of YAP enhances adipogenic differentiation of human periodontal ligament cells.

VIABILITY OF 3T3-L1 PREADIPOCYTES IS MODULATED BY THE APPLIED FREQUENCY BUT NOT THE EXPOSURE DURATION OF LOW INTENSITY VIBRATORY STIMULATION

Mechanical forces are the integral determinants in cell and tissue homeostasis and regeneration, and they can affect numerous biological process from proliferation to fate determination. Mechanical forces that possess low magnitude and high frequency characteristics are also known as low intensity vibrations (LIVs). These signals were studied widely on many cell types for regenerative purposes, however most of these studies select components of LIV signals (e.g., magnitude, frequency, duration, etc.) arbitrarily. Here, we addressed the effect of LIV applied frequency, LIV daily exposure time and fate induction on the viability of preadipocyte 3T3-L1 cells. For this, we performed a frequency sweep that was ranging from 30[Formula: see text]Hz to 120[Formula: see text]Hz with 15[Formula: see text]Hz increments applied for 5, 10 or 20[Formula: see text]min during quiescent growth or adipogenesis for up to 10 days. Results suggest that the applied frequency and fate induction was an important determinant of cell viability while daily exposure time had no effect. These findings contribute to the effort of optimizing a relevant mechanical stimulus that can inhibit adipogenesis.

The Osteogenic Differentiation of Human Dental Pulp Stem Cells through G0/G1 Arrest and the p-ERK/Runx-2 Pathway by Sonic Vibration

Mechanical/physical stimulations modulate tissue metabolism, and this process involves multiple cellular mechanisms, including the secretion of growth factors and the activation of mechano-physically sensitive kinases. Cells and tissue can be modulated through specific vibration-induced changes in cell activity, which depend on the vibration frequency and occur via differential gene expression. However, there are few reports about the effects of medium-magnitude (1.12 g) sonic vibration on the osteogenic differentiation of human dental pulp stem cells (HDPSCs). In this study, we investigated whether medium-magnitude (1.12 g) sonic vibration with a frequency of 30, 45, or 100 Hz could affect the osteogenic differentiation of HDPSCs. Their cell morphology changed to a cuboidal shape at 45 Hz and 100 Hz, but the cells in the other groups were elongated. FACS analysis showed decreased CD 73, CD 90, and CD 105 expression at 45 Hz and 100 Hz. Additionally, the proportions of cells in the G0/G1 phase in the control, 30 Hz, 45 Hz, and 100 Hz groups after vibration were 60.7%, 65.9%, 68.3%, and 66.7%, respectively. The mRNA levels of osteogenic-specific markers, including osteonectin, osteocalcin, BMP-2, ALP, and Runx-2, increased at 45 and 100 Hz, and the ALP and calcium content was elevated in the vibration groups compared with those in the control. Additionally, the western blotting results showed that p-ERK, BSP, osteoprotegerin, and osteonectin proteins were upregulated at 45 Hz compared with the other groups. The vibration groups showed higher ALP and calcium content than the control. Vibration, especially at 100 Hz, increased the number of calcified nodes relative to the control group, as evidenced by von Kossa staining. Immunohistochemical staining demonstrated that type I and III collagen, osteonectin, and osteopontin were upregulated at 45 Hz and 100 Hz. These results suggest that medium magnitude vibration at 45 Hz induces the G0/G1 arrest of HDPSCs through the p-ERK/Runx-2 pathway and can serve as a potent stimulator of differentiation and extracellular matrix production.

The Effect of Mechanical Vibration on Osteogenesis of Periodontal Ligament Stem Cells

INTRODUCTION

Appropriate occlusal forces can prevent ankylosis after tooth replantation or transplantation. However, the "proper occlusal forces" on periodontal ligament (PDL) healing have not yet been defined due to insufficient in vitro studies and uncertain in vitro models. Herein, we presented a mechanical vibration device as an in vitro model to determine such favorable occlusal forces.

METHODS

Human periodontal ligament stem cells (hPDLSCs) were exposed to mechanical vibration force with 4 frequencies (30, 90, 150, and 210 rpm). Cell viability and the expression of osteogenic differentiation-related genes and proteins were tested in vitro. The calvarial transplantation experiment was performed to assess the bone formation ability of 150 rpm mechanical vibration stimulation (MVS).

RESULTS

MVS at 150 and 210 rpm significantly reduced cell viability in the early stages. The 150-rpm MVS decreased osteogenic marker expression at the early time point (3 days) but had no harmful effects at the late time point (14 days). Furthermore, hPDLSC cell sheets treated with 150-rpm MVS had potential to decrease bone formation in rat calvarial defects serendipitously and facilitated functional PDL-like tissue formation.

CONCLUSIONS

We found that MVS at a frequency of 150 rpm could provide a strategy for a transient reduction in the osteogenic potential of hPDLSCs and promote PDL-like tissue formation. Thus, 150-rpm MVS could be used as a controllable proper occlusal force to prevent ankylosis and promote PDL healing after tooth replantation or transplantation.

Three-dimensional imaging and molecular analysis of the effects of photobiomodulation and mechanical vibration on orthodontic retention treatment in rats : Effects of photobiomodulation and mechanical vibration on orthodontic retention treatment

PURPOSE

We aimed to evaluate and compare effects of photobiomodulation (PBM) and low-magnitude high-frequency mechanical vibration (HFMV) on orthodontic retention.

METHODS

Sixty-four female Wistar albino rats were divided into 9 groups (2 negative and positive controls each, 3 PBM and 2 HFMV groups) and studied for 25 days. In the experimental groups, closed nickel-titanium closed coil springs with a 50 cN force were placed for 10 days between the maxillary incisor and molar. PBM and HFMV were applied daily over long- (15 days) and short-term (7 days) retention periods. The PBM groups received PBM with a single wavelength (650 nm) or higher wavelengths (532, 650, 940 nm) for 9 min per day. HFMV groups received HFMV of 10, 20, and 30 Hz for 10 min per day. Right and left maxilla were assessed using micro-computed tomography imaging and real-time polymerase chain reaction. The amount of tooth movement during the retention period, expression levels of cyclooxygenase‑2 (COX-2), osteoprotegerin (OPG), and receptor activator of nuclear factor-kappa B ligand (RANKL) mRNA gene expression levels, OPG/RANKL ratios, alveolar bone trabecular thickness (Tb.Th), trabecular number (Tb.N), and structure model index were analyzed. Kruskal-Wallis and Mann-Whitney U tests were used for multiple comparisons of the nonparametric distributed data and binary comparisons, respectively.

RESULTS

When using the long-term retention protocol, PBM and HFMV treatment increased Tb.N (p < 0.05) and decreased COX‑2 mRNA gene expression levels (p < 0.05) and Tb.Th (p < 0.05) compared to controls. For short-term retention, PBM and HFMV decreased the amount of relapse tooth movement compared to controls. In addition, Tb.Th (p < 0.05) and the mRNA gene expression levels of COX‑2 and RANKL (p < 0.05) were decreased.

CONCLUSION

PBM and HFMV might be able to support retention after orthodontic tooth movement by reducing bone resorption and increasing bone quality.

Possible Mechanisms for the Effects of Sound Vibration on Human Health

This paper presents a narrative review of research literature to “map the landscape” of the mechanisms of the effect of sound vibration on humans including the physiological, neurological, and biochemical. It begins by narrowing music to sound and sound to vibration. The focus is on low frequency sound (up to 250 Hz) including infrasound (1–16 Hz). Types of application are described and include whole body vibration, vibroacoustics, and focal applications of vibration. Literature on mechanisms of response to vibration is categorized into hemodynamic, neurological, and musculoskeletal. Basic mechanisms of hemodynamic effects including stimulation of endothelial cells and vibropercussion; of neurological effects including protein kinases activation, nerve stimulation with a specific look at vibratory analgesia, and oscillatory coherence; of musculoskeletal effects including muscle stretch reflex, bone cell progenitor fate, vibration effects on bone ossification and resorption, and anabolic effects on spine and intervertebral discs. In every category research on clinical applications are described. The conclusion points to the complexity of the field of vibrational medicine and calls for specific comparative research on type of vibration delivery, amount of body or surface being stimulated, effect of specific frequencies and intensities to specific mechanisms, and to greater interdisciplinary cooperation and focus.

Effects of Physical Stimulation in the Field of Oral Health

Physical stimulation has been widely used in clinical medicine and healthcare due to its noninvasiveness. The main applications of physical stimulation in the oral cavity include laser, ultrasound, magnetic field, and vibration, which have photothermal, cavitation, magnetocaloric, and mechanical effects, respectively. In addition, the above four stimulations with their unique biological effects, which can play a role at the gene, protein, and cell levels, can provide new methods for the treatment and prevention of common oral diseases. These four physical stimulations have been used as important auxiliary treatment methods in the field of orthodontics, implants, periodontal, dental pulp, maxillofacial surgery, and oral mucosa. This paper systematically describes the application of physical stimulation as a therapeutic method in the field of stomatology to provide guidance for clinicians. In addition, some applications of physical stimulation in specific directions are still at the research stage, and the specific mechanism has not been fully elucidated. To encourage further research on the oral applications of physical stimulation, we elaborate the research results and development history of various physical stimuli in the field of oral health.

Current Trends in In Vitro Modeling to Mimic Cellular Crosstalk in Periodontal Tissue

Clinical evidence indicates that in physiological and therapeutic conditions a continuous remodeling of the tooth root cementum and the periodontal apparatus is required to maintain tissue strength, to prevent damage, and to secure teeth anchorage. Within the tooth's surrounding tissues, tooth root cementum and the periodontal ligament are the key regulators of a functional tissue homeostasis. While the root cementum anchors the periodontal fibers to the tooth root, the periodontal ligament itself is the key regulator of tissue resorption, the remodeling process, and mechanical signal transduction. Thus, a balanced crosstalk of both tissues is mandatory for maintaining the homeostasis of this complex system. However, the mechanobiological mechanisms that shape the remodeling process and the interaction between the tissues are largely unknown. In recent years, numerous 2D and 3D in vitro models have sought to mimic the physiological and pathophysiological conditions of periodontal tissue. They have been proposed to unravel the underlying nature of the cell-cell and the cell-extracellular matrix interactions. The present review provides an overview of recent in vitro models and relevant biomaterials used to enhance the understanding of periodontal crosstalk and aims to provide a scientific basis for advanced regenerative strategies.

The Effect of High-Frequency Vibration on Tooth Movement and Alveolar Bone in Non-Growing Skeletal Class II High Angle Orthodontic Patients: Case Series

This study presents a novel technique utilizing high-frequency vibration to shorten treatment time and preserve alveolar bone in challenging orthodontic cases that have been treated with Invisalign^® clear aligners. Four non-growing orthodontic patients (age range 14–47 years old) with Class II skeletal patterns (convex profiles with retrognathic mandibles) who sought correction of their crowded teeth and non-surgical correction of their convex profiles were included in this study. These patients were treated using Invisalign clear aligners together with high-frequency vibration (HFV) devices (120 Hz) (VPro5™) that were used by all patients for five minutes per day during active orthodontic treatment. Vertical control and forward rotation of the mandible for each patient was achieved through pre-programming the Invisalign to produce posterior teeth intrusion. Successful forward rotation of the mandibles achieved in all patients led to improvement of their facial convex profiles (apical base relationship (ANB) improved 2.1 ± 0.5 degrees; FMA (Frankfurt mandibular plane angle) improved 1.2 + 1.1 degrees). Dental decompensation was achieved by lingual tipping of the lower incisors and palatal root torque of upper incisors. The use of HFV together with Invisalign facilitated achieving these results within a 12 ± 6 months period. In addition, more bone labial to the lower incisors after their lingual movement was noted. In conclusion, the use of HFV concurrent with SmartTrack Invisalign aligners allowed complex tooth movement and forward mandibular projection without surgery in non-growing patients with skeletal Class II relationships. The clinical impact and implications of this case series are: (1) the use of HFV facilitates complex orthodontic tooth movement including posterior teeth intrusion and incisor decompensation; (2) forward mandibular projection of the mandible and increased bone formation labial to lower incisors can be achieved in non-growing patients that may minimize the need for surgical intervention in similar cases or gum recession due to lower incisors labial inclination.

Does low-frequency vibration have an effect on aligner treatment? A single-centre, randomized controlled trial

BACKGROUND

Low-frequency vibrations have been proposed as a means of accelerating tooth movement and reducing orthodontic treatment times.

OBJECTIVE

To determine any differences in the accuracy of dental movement in patients treated with a low-frequency vibration aligner protocol and/or by reducing the aligner replacement interval with respect to a conventional protocol.

DESIGN

This trial was designed as a single-centre, randomized controlled clinical trial.

METHODS

Participants: Patients (aged 27.1 ± 9.0 years) who required orthodontic treatment with aligners. Randomization: Patients were randomly allocated to three arms as determined by a computer-randomization scheme. Group A were assigned a conventional protocol (aligners replaced every 14 days); group B also used a low-frequency vibration device for 20 minutes per day; group C followed the same vibration protocol but replaced their aligners every 7 days. Blinding: The operator who performed the set-up and the one who analysed the data were blinded to the group of the patients. Outcome: Pre- and post-treatment digital models were analysed using VAM software to identify the accuracy/imprecision of dental movements. One-way analysis of variance (P < 0.05) and the Bonferroni post hoc test were used to identify any statistically significant differences between the three arms in terms of the accuracy of tooth movement versus the prescription.

RESULTS

Numbers analysed: A total of 45 patients (15 for group) were analysed (i.e. 2286 dental movements). Outcome: No statistically significant differences emerged between groups A and C in the upper arch, or among groups A, B, and C in the lower. Group B displayed significantly greater accuracy with respect to group A in upper incisor rotation (P = 0.016), and to group C in vestibulolingual (P = 0.007) and mesiodistal tipping (P = 0.029) of the upper canines, and vestibulolingual tipping of the upper molars (P = 0.0001). Harms: No adverse events or side-effects were registered.

CONCLUSIONS

Considering all tooth and movement types of the 45 participants, the mean total imprecision was 2.1 ± 0.9 degrees, with respect to a mean prescription of 5.7 ± 2.2 degrees. There was no difference in accuracy between replacing the aligners accompanied by low-frequency vibration every 7 days and replacing them every 14 days without vibration. Moreover, low-frequency vibration seemed to improve the accuracy of a conventional protocol in terms of upper incisor rotation.

TRIAL REGISTRATION

The German Clinical Trials Register (DRK00015613).

Design, Implementation, and Validation of a Piezoelectric Device to Study the Effects of Dynamic Mechanical Stimulation on Cell Proliferation, Migration and Morphology

Cell functions and behavior are regulated not only by soluble (biochemical) signals but also by biophysical and mechanical cues within the cells' microenvironment. Thanks to the dynamical and complex cell machinery, cells are genuine and effective mechanotransducers translating mechanical stimuli into biochemical signals, which eventually alter multiple aspects of their own homeostasis. Given the dominant and classic biochemical-based views to explain biological processes, it could be challenging to elucidate the key role that mechanical parameters such as vibration, frequency, and force play in biology. Gaining a better understanding of how mechanical stimuli (and their mechanical parameters associated) affect biological outcomes relies partially on the availability of experimental tools that may allow researchers to alter mechanically the cell's microenvironment and observe cell responses. Here, we introduce a new device to study in vitro responses of cells to dynamic mechanical stimulation using a piezoelectric membrane. Using this device, we can flexibly change the parameters of the dynamic mechanical stimulation (frequency, amplitude, and duration of the stimuli), which increases the possibility to study the cell behavior under different mechanical excitations. We report on the design and implementation of such device and the characterization of its dynamic mechanical properties. By using this device, we have performed a preliminary study on the effect of dynamic mechanical stimulation in a cell monolayer of an epidermal cell line (HaCaT) studying the effects of 1 Hz and 80 Hz excitation frequencies (in the dynamic stimuli) on HaCaT cell migration, proliferation, and morphology. Our preliminary results indicate that the response of HaCaT is dependent on the frequency of stimulation. The device is economic, easily replicated in other laboratories and can support research for a better understanding of mechanisms mediating cellular mechanotransduction.

Core Matrisome Protein Signature During Periodontal Ligament Maturation From Pre-occlusal Eruption to Occlusal Function

The pre-occlusal eruption brings the molars into functional occlusion and initiates tensional strains during mastication. We hypothesized that upon establishment of occlusal contact, the periodontal ligament (PDL) undergoes cell and extracellular matrix maturation to adapt to this mechanical function. The PDL of 12 Wistar male rats were laser microdissected to observe the proteomic changes between stages of pre-occlusal eruption, initial occlusal contact and 1-week after occlusion. The proteome was screened by mass spectrometry and confirmed by immunofluorescence. The PDL underwent maturation upon establishment of occlusion. Downregulation of alpha-fetoprotein stem cell marker and protein synthesis markers indicate cell differentiation. Upregulated proteins were components of the extracellular matrix (ECM) and were characterized with the matrisome project database. In particular, periostin, a major protein of the PDL, was induced following occlusal contact and localized around collagen α-1 (III) bundles. This co-localization coincided with organization of collagen fibers in direction of the occlusal forces. Establishment of occlusion coincides with cellular differentiation and the maturation of the PDL. Co-localization of periostin and collagen with subsequent fiber organization may help counteract tensional forces and reinforce the ECM structure. This may be a key mechanism of the PDL to adapt to occlusal forces and maintain structural integrity.

Transcriptional Expression in Human Periodontal Ligament Cells Subjected to Orthodontic Force: An RNA-Sequencing Study

This study was performed to investigate the changes in gene expression in periodontal ligament (PDL) cells following mechanical stimulus through RNA sequencing. In this study, premolars extracted for orthodontic treatment were used. To stimulate the PDL cells, an orthodontic force of 100× g was applied to the premolar (experimental group; n = 11), whereas the tooth on the other side was left untreated (control group; n = 11). After the PDL cells were isolated from the extracted teeth, gene set enrichment analysis (GSEA), differentially expressed gene (DEG) analysis, and real-time PCR were performed to compare the two groups. GSEA demonstrated that gene sets related to the cell cycle pathway were upregulated in PDL. Thirteen upregulated and twenty downregulated genes were found through DEG analysis. Real-time PCR results confirmed that five upregulated genes (CC2D1B, CPNE3, OPHN1, TANGO2, and UAP-1) and six downregulated genes (MYOM2, PPM1F, PCDP1, ATP2A1, GPR171, and RP1-34H18.1-1) were consistent with RNA sequencing results. We suggest that, from among these eleven genes, two upregulated genes, CPNE3 and OPHN1, and one downregulated gene, PPM1F, play an important role in PDL regeneration in humans when orthodontic force is applied.

Applicability of Low-intensity Vibrations as a Regulatory Factor on Stem and Progenitor Cell Populations

Persistent and transient mechanical loads can act as biological signals on all levels of an organism. It is therefore not surprising that most cell types can sense and respond to mechanical loads, similar to their interaction with biochemical and electrical signals. The presence or absence of mechanical forces can be an important determinant of form, function and health of many tissue types. Along with naturally occurring mechanical loads, it is possible to manipulate and apply external physical loads on tissues in biomedical sciences, either for prevention or treatment of catabolism related to many factors, including aging, paralysis, sedentary lifestyles and spaceflight. Mechanical loads consist of many components in their applied signal form such as magnitude, frequency, duration and intervals. Even though high magnitude mechanical loads with low frequencies (e.g. running or weight lifting) induce anabolism in musculoskeletal tissues, their applicability as anabolic agents is limited because of the required compliance and physical health of the target population. On the other hand, it is possible to use low magnitude and high frequency (e.g. in a vibratory form) mechanical loads for anabolism as well. Cells, including stem cells of the musculoskeletal tissue, are sensitive to high frequency, lowintensity mechanical signals. This sensitivity can be utilized not only for the targeted treatment of tissues, but also for stem cell expansion, differentiation and biomaterial interaction in tissue engineering applications. In this review, we reported recent advances in the application of low-intensity vibrations on stem and progenitor cell populations. Modulation of cellular behavior with low-intensity vibrations as an alternative or complementary factor to biochemical and scaffold induced signals may represent an increase of capabilities in studies related to tissue engineering.

Vibration activates the actin/NF-κB axis and upregulates IL-6 and IL-8 expression in human periodontal ligament cells

We previously reported that mechanical vibration-induced proinflammatory cytokines, interleukin-6 (IL-6) and IL-8, expression in human periodontal ligament (hPDL) cells, however, the underlying mechanism remained unclear. Mechanical stimuli are able to activate cellular responses by inducing the activation of several signaling pathways including cytoskeletal changes and inflammation. The actin cytoskeleton is a highly dynamic network and plays many important roles in intracellular events. Here, we aimed to investigate the involvement of a pivotal mediator of inflammatory responses, nuclear factor-κB (NF-κB), and actin polymerization in vibration-induced upregulation of IL-6 and IL-8 expression in hPDL cells. hPDL cells were pretreated with the NF-κB inhibitor BAY 11-7082 or cytochalasin D, respectively, before exposure to vibration. IL-6 and IL-8 messenger RNA (mRNA) and protein expression were quantified by quantitative polymerase chain reaction and enzyme-linked immunosorbent assays, respectively. Subcellular localization of the NF-κB p65 subunit was visualized by immunofluorescent staining. We found an increase in NF-κB nuclear translocation in vibrated cells compared with control cells. Pretreatment with BAY 11-7082 significantly inhibited vibration-induced IL-6 and IL-8 mRNA and protein expression in hPDL cells. Moreover, pretreatment with cytochalasin D inhibited NF-κB nuclear translocation and attenuated upregulation of IL-6 and IL-8 mRNA and protein in vibrated cells. Therefore, modulation of actin cytoskeletal polymerization in response to vibration may activate the NF-κB signaling pathway and subsequently upregulate IL-6 and IL-8 expression in hPDL cells.

Effect of ILK on small-molecule metabolism of human periodontal ligament fibroblasts with mechanical stretching

BACKGROUND

Mechanical stimuli can cause periodontal tissue reconstruction. Studies have found that changes in metabolites can be the terminal effect of integrin-mediated mechanical signaling. As a key kinase in integrin regulation, integrin-linked kinase (ILK) mediates mechanical signal transduction, which may contribute to metabolite changes. Defining the components of small-molecule metabolites can optimize mechanical stimuli and periodontal tissue reconstruction. Our purpose is to detect the effect of ILK-mediated mechanical signaling on intracellular small-molecule metabolites (amino acids and organic acids) in human periodontal ligament fibroblasts (HPDLFs).

METHODS

Primary HPDLFs were isolated by enzyme digestion method. Tensile stresses were applied on HPDLFs in vitro using a Flexcell system. ILK gene in HPDLFs was knocked down by RNA interference (RNAi). Twenty common amino acids and seven organic acids in HPDLFs were analyzed by gas chromatography/mass spectrometry technique.

RESULTS

Five amino acids (ie, alanine, glutamine, glutamate, glycine, and threonine) and three organic acids (ie, pyruvate, lactate, and citric acid) were found to be changed remarkably after mechanical stretching. In addition, baseline levels of four amino acids (ie, glutamate, glutamine, threonine, and glycine) and two organic acids (ie, lactate and citric acid) were significantly different in ILK knockdown compared with wild-type HPDLFs.

CONCLUSION

This study suggests that five amino acids (ie, alanine, glutamine, glutamate, glycine, and threonine) and three organic acids (ie, pyruvate, lactate, and citric acid) may act as cellular mediators for mechanical signals in HPDLFs. Among them, four amino acids (ie, glutamate, glutamine, threonine, and glycine) and two organic acids (ie, lactate and citric acid) may be closely linked to ILK.

Design, construction and characterisation of a novel nanovibrational bioreactor and cultureware for osteogenesis

In regenerative medicine, techniques which control stem cell lineage commitment are a rapidly expanding field of interest. Recently, nanoscale mechanical stimulation of mesenchymal stem cells (MSCs) has been shown to activate mechanotransduction pathways stimulating osteogenesis in 2D and 3D culture. This has the potential to revolutionise bone graft procedures by creating cellular graft material from autologous or allogeneic sources of MSCs without using chemical induction. With the increased interest in mechanical stimulation of cells and huge potential for clinical use, it is apparent that researchers and clinicians require a scalable bioreactor system that provides consistently reproducible results with a simple turnkey approach. A novel bioreactor system is presented that consists of: a bioreactor vibration plate, calibrated and optimised for nanometre vibrations at 1 kHz, a power supply unit, which supplies a 1 kHz sine wave signal necessary to generate approximately 30 nm of vibration amplitude, and custom 6-well cultureware with toroidal shaped magnets incorporated in the base of each well for conformal attachment to the bioreactor’s magnetic vibration plate. The cultureware and vibration plate were designed using finite element analysis to determine the modal and harmonic responses, and validated by interferometric measurement. This helps ensure that the vibration plate and cultureware, and thus collagen and MSCs, all move as a rigid body, avoiding large deformations close to the resonant frequency of the vibration plate and vibration damping beyond the resonance. Assessment of osteogenic protein expression was performed to confirm differentiation of MSCs after initial biological experiments with the system, as well as atomic force microscopy of the 3D gel constructs during vibrational stimulation to verify that strain hardening of the gel did not occur. This shows that cell differentiation was the result of the nanovibrational stimulation provided by the bioreactor alone, and that other cell differentiating factors, such as stiffening of the collagen gel, did not contribute.

Cell adhesion and culture medium dependent changes in the high frequency mechanical vibration induced proliferation, osteogenesis, and intracellular organization of human adipose stem cells

High frequency (HF) mechanical vibration appears beneficial for in vitro osteogenesis of mesenchymal stem cells (MSCs). However, the current mechanobiological understanding of the method remains insufficient. We designed high-throughput stimulators to apply horizontal or vertical high magnitude HF (HMHF; 2.5 G_peak, 100 Hz) vibration on human adipose stem cells (hASCs). We analyzed proliferation, alkaline phosphatase (ALP) activity, mineralization, and effects on the actin cytoskeleton and nuclei using immunocytochemical stainings. Proliferation was studied on a standard tissue culture plastic (sTCP) surface and on an adhesion supporting tissue culture plastic (asTCP) surface in basal (BM) and osteogenic (OM) culture medium conditions. We discovered that the improved cell adhesion was a prerequisite for vibration induced changes in the proliferation of hASCs. Similarly, the adhesion supporting surface enabled us to observe vibration initiated ALP activity and mineralization changes in OM condition. The horizontal vibration increased ALP activity, while vertical stimulation reduced ALP activity. However, mineralization was not enhanced by the HMHF vibration. We performed image-based analysis of actin and nuclei to obtain novel data of the intracellular-level responses to HF vibration in BM and OM conditions. Our quantitative results suggest that actin organizations were culture medium and stimulation direction dependent. Both stimulation directions decreased OM induced changes in nuclear size and elongation. Consequently, our findings of the nuclear deformations provide supportive evidence for the involvement of the nuclei in the mechanocoupling of HF vibration. Taken together, the results of this study enhanced the knowledge of the intracellular mechanisms of HF vibration induced osteogenesis of MSCs.

An Evaluation of the Delivery of Medicines Using Drones

This study tests the impact of drone transportation on the quality of a medicine. Modelling the critical process parameters of drone flight, the effects of temperature and vibration on insulin were investigated using the pharmacopoeia methods. The medicine, Actrapid, (3.5 mg/mL of insulin), was flown by a quad-rotor drone. Insulin stored between −20 and 40 °C for 30 mins, and subjected to vibration (0–40 Hz, 25 °C, 30 mins) passed the pharmacopeia tests. Dynamic light scattering identified the active tetrameric and hexameric forms of insulin post testing. Vibration frequencies during drone flight were between 0.1 and 3.4 Hz. There was no evidence of visible insulin aggregates following the drone transportation. The differences in UV absorbance readings between flown Actrapid and controls were insignificant (p = 0.89). No adverse impact of drone transport on insulin was observed. This study provides supporting evidence that drone transportation of medicinal products containing insulin is feasible. The authors recommend that when considering the drone delivery of medicines five tests need to be applied. These tests must determine the safe flight time and range, the quality of the medicine post flight, the onboard conditions experienced by the medicine, the security of the drone supply chain and the effect of drone failure on both the medicine and the environment.

Effectiveness of electric toothbrush as vibration method on orthodontic tooth movement: a split-mouth study

Objective:

To investigate the effects of application of vibratory stimuli, using an electric toothbrush, on the rate of orthodontic tooth movement during maxillary canine retraction.

Methods:

A split-mouth study was conducted in 28 subjects (mean age = 20.8 years; ranging from 18 to 24 years) whose bilateral maxillary first premolars were extracted with subsequent canine retraction. On the Vibration side, light force (100 g) was applied to the canine for 90 days, in combination with vibratory stimuli provided by an electric toothbrush; only orthodontic force was applied to the canine on the non-vibration side. Amount of canine movement was measured monthly. Related to electronic toothbrush usage, a diary was provided to each patient for recording discomfort during experimental period, having 100-mm visual analogue scale (VAS). The paired t-test was used to assess the differences in amount of tooth movement between canines of the vibration and non-vibration sides.

Results:

The amount of tooth movement was similar for canines on the vibration side and on the non-vibration side (mean 0.81 ± 0.10 mm and 0.82 ± 0.11 mm, respectively, p> 0.05). Plaque accumulation was minimal in any subject throughout the study. No subject reported discomfort as a result of using the electric toothbrush.

Conclusions:

This study demonstrates that application of vibratory stimuli using an electric toothbrush, in combination with light orthodontic force, do not accelerate orthodontic tooth movement.

Metallic ion doped tri-calcium phosphate ceramics: Effect of dynamic loading on in vivo bone regeneration

The present study was carried out to evaluate the effect of dynamic loading on bone regeneration performance of different doped β-tri-calcium phosphate ceramics. We have developed porous beta tri-calcium phosphate (β-TCP), 5%zinc doped, 5% magnesium doped and 5% titanium doped β-TCP by aqueous solution combustion technique. All the synthesized β-TCP powders showed pore size of 21-146 μm (pure β-TCP), 16-142 μm (Zn-β-TCP), 28-156 μm (Mg- β-TCP) and 14-173 μm (Ti-β-TCP) while their apparent porosity 17.89%, 28.09%, 26.54% and 25.87% respectively. The pure and doped samples were implanted in femoral bone defect model (rabbit) to assess bone regeneration under dynamic loading. Bone regeneration was assessed after 1 and 2 month post-implantation on the basis of clinical radiological, histological, fluorochrome labelling, micro computed tomography (μ-CT) and scanning electron microscopy (SEM). Radiological and fluorochrome labelling study showed reduced size of 5%Ti-β-TCPimplant vis-à-vis more new bone formation as compared to other groups. Micro-CT of the implanted bone sample showed a significant amount of newly formed bony tissue surrounding the Ti-β-TCP implant as compared to other samples. Similar findings of less interfacial gap between the implant and bone were also observed in SEM study. However, all the doped materials are suitable as bone grafting material and have potential for application in bone tissue engineering.

Efficacy of mechanical vibration in regulating mesenchymal stem cells gene expression

This study aimed at investigating the expression of osteoblast and chondrocyte-related genes in mesenchymal stem cells (MSCs), derived from rabbit adipose tissue, under mechanical vibration. The cells were placed securely on a vibrator's platform and subjected to 300 Hz of sinusoidal vibration, with a maximum amplitude of 10 μm, for 45 min per day, and for 14 consequent days, in the absence of biochemical reagents. The negative control group was placed in the conventional culture medium with no mechanical loading. The expression of osteoblast and chondrocyte-related genes was investigated using real-time polymerase chain reaction (real-time PCR). In addition, F-actin fiber structure and alignment with the help of actin filament fluorescence staining were evaluated, and the level of metabolic activity of MSCs was determined by the methyl thiazolyl tetrazolium assay. The real-time PCR study showed a significant increase of bone gene expression in differentiated cells, compared with MSCs (P < 0.05). On the other hand, the level of chondrocyte gene expression was not remarkable. Applying mechanical vibration enhanced F-actin fiber structure and made them aligned in a specific direction. It was also found that during the differentiation process, the metabolic activity of the cells increased (P < 0.05). The results of this work are in agreement with the well-accepted fact that the MSCs, in the absence of growth factors, are sensitive to low-amplitude, high-frequency vibration. Outcomes of this work can be applied in cell therapy and tissue engineering, when regulation of stem cells is required.

Periodontal cell mechanotransduction

The periodontium is a structurally and functionally complex tissue that facilitates the anchorage of teeth in jaws. The periodontium consists of various cell types including stem cells, fibroblasts and epithelial cells. Cells of the periodontium are constantly exposed to mechanical stresses generated by biological processes such as the chewing motions of teeth, by flows generated by tongue motions and by forces generated by implants. Mechanical stresses modulate the function of cells in the periodontium, and may play a significant role in the development of periodontal disease. Here, we review the literature on the effect of mechanical forces on periodontal cells in health and disease with an emphasis on molecular and cellular mechanisms.

Introducing the Language of "Relativity" for New Scaffold Categorization

Research related with scaffold engineering tends to be cross-domain and miscellaneous. Several realms may need to be focused simultaneously, including biomedicine for cell culture and 3D scaffold, physics for dynamics, manufacturing for technologies like 3D printing, chemistry for material composition, as well as architecture for scaffold's geometric control. As a result, researchers with different backgrounds sometimes could have different understanding towards the product described as 'Scaffold'. After reviewing the literature, numerous studies termed their developed scaffold as 'novel', compared with scaffolds previously designed by others using comparing criterion like 'research time', 'manufacturing method', 'geometry', and so on. While it may have been convenient a decade ago to, for example, categorize scaffold with 'Dualistic Thinking' logic into 'simple-complicated' or 'traditional-novel', this method for categorizing 'novelty' and distinguishing scaffold is insufficiently persuasive and precise when it comes to modern or future scaffold. From this departure of philosophical language, namely the language of 'relativity', it is important to distinguish between different scaffolds. Other than attempting to avoid ambiguity in perceiving scaffold, this language also provides clarity regarding the 'evolution stage' where the focused scaffolds currently stand, where they have been developed, and where in future they could possibly evolve.

Effects of low magnitude high frequency mechanical vibration combined with compressive force on human periodontal ligament cells in vitro

Objective

Vibration can be used to accelerate tooth movement, though the exact mechanisms remain unclear. This study aimed to investigate the effects of low magnitude high frequency (LMHF) vibration combined with compressive force on periodontal ligament (PDL) cells in vitro.

Materials and methods

Human PDL cells were isolated from extracted premolar teeth of four individuals. To determine the optimal frequency for later used in combination with compressive force, three cycles of low-magnitude (0.3 g) vibrations at various frequencies (30, 60, or 90 Hz) were applied to PDL cells for 20 min every 24 h. To investigate the effects of vibration combined with compressive force, PDL cells were subjected to three cycles of optimal vibration frequency (V) or 1.5 g/cm2 compressive force for 48 h (C) or vibration combined with compressive force (VC). Cell viability was assessed using MTT assay. PGE2, soluble RANKL (sRANKL), and OPG production were quantified by ELISA. RANKL, OPG, and Runx2 expression were determined using real-time PCR.

Results

Cell viability was decreased in groups C and VC. PGE2 and RANKL, but not OPG, were increased in groups V, C, and VC, thus increasing the RANKL/OPG ratio. The highest level was observed in group VC. sRANKL was increased in groups V, C, and VC; however, no significant different between the experimental groups. Runx2 expression was reduced in groups C and VC.

Conclusions

Vibration increased PGE2, RANKL, and sRANKL, but not OPG and Runx2. Vibration had the additive effects on PGE2 and RANKL, but not sRANKL in compressed PDL cells.

Molecular Basis for Periodontal Ligament Adaptation to In Vivo Loading

A soft food diet leads to changes in the periodontal ligament (PDL). These changes, which have been recognized for more than a century, are ascribed to alterations in mechanical loading. While these adaptive responses have been well characterized, the molecular, cellular, and mechanical mechanisms underlying the changes have not. Here, we implicate Wnt signaling in the pathoetiology of PDL responses to underloading. We show that Wnt-responsive cells and their progeny in the PDL space exhibit a burst in proliferation in response to mastication. If an animal is fed a soft diet from the time of weaning, then this burst in Wnt-responsive cell proliferation is quelled; as a consequence, both the PDL and the surrounding alveolar bone undergo atrophy. Returning these animals to a hard food diet restores the Wnt signaling in PDL. These data provide, for the first time, a molecular mechanism underlying the adaptive response of the PDL to loading.

The effect of compressive force combined with mechanical vibration on human alveolar bone osteoblasts

Objective

This study aimed to investigate the effects of compressive force combined with mechanical vibration on the expression of pro-inflammatory cytokines that promote osteoclastogenesis and related to orthodontic tooth movement acceleration in human alveolar bone osteoblasts in vitro.

Methods

Osteoblasts were subjected to compressive force (C), mechanical vibration (V), compressive force combined with mechanical vibration (CV), or no force as a control for 12, 24 and 48 h. Interleukin-1 beta (IL-1β), interleukin-6 (IL-6), receptor activator of nuclear factor kappa-Β ligand (RANKL) and osteoprotegerin (OPG) mRNA and protein expression were assessed using quantitative real-time polymerase chain reaction and enzyme-linked immunosorbent assays.

Results

In C and CV groups, IL-1β and IL-6 mRNA and protein expression were significantly higher and OPG mRNA and protein expression were significantly lower than control and V groups. However, the expressions were not different between C and CV groups. RANKL mRNA and protein expression were not different between any groups. While, OPG mRNA and protein expression in V group were significantly higher than control group.

Conclusions

Vibration neither enhanced nor inhibited the expression of IL-1β, IL-6, RANKL and OPG in compressed human alveolar bone osteoblasts.

Mechanobiology of Periodontal Ligament Stem Cells in Orthodontic Tooth Movement

Periodontal ligament stem cells (PDLSCs) possess self-renewal, multilineage differentiation, and immunomodulatory properties. They play a crucial role in maintaining periodontal homeostasis and also participated in orthodontic tooth movement (OTM). Various studies have applied controlled mechanical stimulation to PDLSCs and investigated the effects of orthodontic force on PDLSCs. Physical stimuli can regulate the proliferation and differentiation of PDLSCs. During the past decade, a variety of studies has demonstrated that applied forces can activate different signaling pathways in PDLSCs, including MAPK, TGF-β/Smad, and Wnt/β-catenin pathways. Besides, recent advances have highlighted the critical role of orthodontic force in PDLSC fate through mediators, such as IL-11, CTHRC1, miR-21, and H₂S. This perspective review critically discusses the PDLSC fate to physical force in vitro and orthodontic force in vivo, as well as the underlying molecular mechanism involved in OTM.

Trinity of Three-Dimensional (3D) Scaffold, Vibration, and 3D Printing on Cell Culture Application: A Systematic Review and Indicating Future Direction

Cell culture and cell scaffold engineering have previously developed in two directions. First can be 'static into dynamic', with proven effects that dynamic cultures have benefits over static ones. Researches in this direction have used several mechanical means, like external vibrators or shakers, to approximate the dynamic environments in real tissue, though such approaches could only partly address the issue. Second, can be '2D into 3D', that is, artificially created three-dimensional (3D) passive (also called 'static') scaffolds have been utilized for 3D cell culture, helping external culturing conditions mimic real tissue 3D environments in a better way as compared with traditional two-dimensional (2D) culturing. In terms of the fabrication of 3D scaffolds, 3D printing (3DP) has witnessed its high popularity in recent years with ascending applicability, and this tendency might continue to grow along with the rapid development in scaffold engineering. In this review, we first introduce cell culturing, then focus 3D cell culture scaffold, vibration stimulation for dynamic culture, and 3DP technologies fabricating 3D scaffold. Potential interconnection of these realms will be analyzed, as well as the limitations of current 3D scaffold and vibration mechanisms. In the recommendation part, further discussion on future scaffold engineering regarding 3D vibratory scaffold will be addressed, indicating 3DP as a positive bridging technology for future scaffold with integrated and localized vibratory functions.

Control of cell behaviour through nanovibrational stimulation: nanokicking

Mechanical signals are ubiquitous in our everyday life and the process of converting these mechanical signals into a biological signalling response is known as mechanotransduction. Our understanding of mechanotransduction, and its contribution to vital cellular responses, is a rapidly expanding field of research involving complex processes that are still not clearly understood. The use of mechanical vibration as a stimulus of mechanotransduction, including variation of frequency and amplitude, allows an alternative method to control specific cell behaviour without chemical stimulation (e.g. growth factors). Chemical-independent control of cell behaviour could be highly advantageous for fields including drug discovery and clinical tissue engineering. In this review, a novel technique is described based on nanoscale sinusoidal vibration. Using finite-element analysis in conjunction with laser interferometry, techniques that are used within the field of gravitational wave detection, optimization of apparatus design and calibration of vibration application have been performed. We further discuss the application of nanovibrational stimulation, or 'nanokicking', to eukaryotic and prokaryotic cells including the differentiation of mesenchymal stem cells towards an osteoblast cell lineage. Mechanotransductive mechanisms are discussed including mediation through the Rho-A kinase signalling pathway. Optimization of this technique was first performed in two-dimensional culture using a simple vibration platform with an optimal frequency and amplitude of 1 kHz and 22 nm. A novel bioreactor was developed to scale up cell production, with recent research demonstrating that mesenchymal stem cell differentiation can be efficiently triggered in soft gel constructs. This important step provides first evidence that clinically relevant (three-dimensional) volumes of osteoblasts can be produced for the purpose of bone grafting, without complex scaffolds and/or chemical induction. Initial findings have shown that nanovibrational stimulation can also reduce biofilm formation in a number of clinically relevant bacteria. This demonstrates additional utility of the bioreactor to investigate mechanotransduction in other fields of research.This article is part of a discussion meeting issue 'The promises of gravitational-wave astronomy'.

Vibration loading promotes osteogenic differentiation of bone marrow-derived mesenchymal stem cells via p38 MAPK signaling pathway

Low magnitude high frequency vibration (LMHFV) exhibits effectively anabolic effects on the bone tissue, and can promote osteogenic differentiation of mesenchymal stem cells (MSCs) in vitro. The role of p38 MAPK signaling in LMHFV-induced osteogenesis remains unclear. In this current study, LMHFV loading was applied to BMSCs in vitro, and cell proliferation, alkaline phosphatase (ALP), matrix mineralization, as well as osteogenic genes expression were assayed. The mechanism of mechanical signal transduction was analysed using PCR array, qRT-PCR and Western blot. LMHFV increased cell proliferation in the growth medium, while inhibited proliferation in the osteogenic medium. ALP activity, matrix mineralization and osteogenic genes expression of Runx2, Col-I, ALP, OPN and OC were increased by LMHFV. p38 and MKK6 genes expression, and p38 phosphorylation were promoted in LMHFV-induced osteogenesis. Inhibition of p38 MAPK with SB203580 and targeted p38 siRNA blunted the increased ALP activity and osteogenic genes expression by LMHFV. These findings suggest that LMHFV promotes osteogenic differentiation of BMSCs, and p38 MAPK signaling shows an important function in LMHFV-induced osteogenesis.

Mechanosensitive miRNAs and Bone Formation

Mechanical stimuli are required for the maintenance of skeletal integrity and bone mass. An increasing amount of evidence indicates that multiple regulators (e.g., hormone, cytoskeleton proteins and signaling pathways) are involved in the mechanical stimuli modulating the activities of osteogenic cells and the process of bone formation. Significantly, recent studies have showed that several microRNAs (miRNAs) were sensitive to various mechanical stimuli and played a crucial role in osteogenic differentiation and bone formation. However, the functional roles and further mechanisms of mechanosensitive miRNAs in bone formation are not yet completely understood. This review highlights the roles of mechanosensitive miRNAs in osteogenic differentiation and bone formation and underlines their potential therapeutic application for bone loss induced by the altering of mechanical stimuli.

Effects of fluoride on proliferation and mineralization in periodontal ligament cells in vitro

Fluoride, which is often added to toothpaste or mouthwash in order to protect teeth from decay, may be a novel therapeutic approach for acceleration of periodontal regeneration. Therefore, we investigated the effects of fluoride on proliferation and mineralization in human periodontal ligament cells in vitro. The periodontal ligament cells were stimulated with various concentrations of NaF added into osteogenic inductive medium. Immunohistochemistry of cell identification, cell proliferation, alkaline phosphatase (ALP) activity assay, Alizarin red S staining and quantitative real-time-polymerase chain reaction (RT-PCR) were performed. Moderate concentrations of NaF (50-500 μmol/L) had pro-proliferation effects, while 500 μmol/L had the best effects. ALP activity and calcium content were significantly enhanced by 10 μmol/L NaF with osteogenic inductive medium. Quantitative RT-PCR data varied in genes as a result of different NaF concentrations and treatment periods. We conclude that moderate concentrations of NaF can stimulate proliferation and mineralization in periodontal ligament cells. These in vitro findings may provide a novel therapeutic approach for acceleration of periodontal regeneration by addition of suitable concentrations of NaF into the medication for periodontitis treatment, i.e., into periodontal packs and tissue patches.

Low magnitude high frequency vibration promotes adipogenic differentiation of bone marrow stem cells via P38 MAPK signal

Low magnitude high frequency vibration (LMHFV) has been mainly reported for its influence on the musculoskeletal system, particularly the bone tissue. In the bone structure, osteogenic activity is the main focus of study with regards to LMHFV. However, adipogenesis, another important mode of differentiation in the bone marrow cavity that might be affected by LMHFV, is much less researched. Furthermore, the molecular mechanism of how LMHFV influences adipogenesis still needs to be understood. Here, we tested the effect of LMHFV (0.3g, 40 Hz, amplitude: 50μm), 15min/d, on multipotent stem cells (MSCs), which are the common progenitors of osteogenic, chondrogenic, adipogenic and myogenic cells. It is previously shown that LMHFV promotes osteogenesis of MSCs. In this study, we further revealed its effect on adipo-differentiation of bone marrow stem cells (BMSCs) and studied the underlying signaling pathway. We found that when treated with LMHFV, the cells showed a higher expression of PPARγ, C/EBPα, adiponectin and showed more oil droplets. After vibration, the protein expression of PPARγ increased, and the phosphorylation of p38 MAPK was enhanced. After treating cells with SB203580, a specific p38 inhibitor, both the protein level of PPARγ illustrated by immunofluorescent staining and the oil droplets number, were decreased. Altogether, this indicates that p38 MAPK is activated during adipogenesis of BMSCs, and this is promoted by LMHFV. Our results demonstrating that specific parameters of LMHFV promotes adipogenesis of MSCs and enhances osteogenesis, highlights an unbeneficial side effect of vibration therapy used for preventing obesity and osteoporosis.