Primary total hip arthroplasty with an uncemented femoral component five- to nine-year results

The Wagner Cone Stem for Atypical Femoral Anatomy in Total Hip Arthroplasty: A Report of 320 Cases with Minimum 5-Year Follow-up

BACKGROUND

The Wagner Cone Prosthesis was designed to address complex femoral deformities during total hip arthroplasty (THA), but its mid-term component survivorship and functional outcomes remain undetermined. The objectives of this study were to determine the implant survivorship, patient satisfaction, functional outcomes, osseointegration as seen radiographically, implant subsidence, and complications of THA using the Wagner Cone Prosthesis stem at intermediate-term follow-up.

METHODS

This study involved 302 patients with proximal femoral deformities, including developmental hip dysplasia and Legg-Calvé-Perthes disease, who underwent a total of 320 primary THAs using the Wagner Cone Prosthesis. The average age at the time of surgery was 49.4 ± 14.5 years (range, 18.8 to 85.6 years). Patient satisfaction was recorded using a self-administered questionnaire assessing satisfaction in 4 domains. The University of California at Los Angeles (UCLA) activity score, the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), the Oxford Hip Score (OHS), the Forgotten Joint Score (FJS), radiographic outcomes, and complications were recorded. The mean follow-up time was 10.1 years (range, 5.2 to 15.5 years).

RESULTS

Survivorship of the Wagner Cone Prosthesis was 98.7% (95% confidence interval [CI]: 97.2% to 100%) with stem revision as the end point and 95.8% (95% CI: 93.5% to 98.2%) with reoperation for any reason as the end point at 10 years postoperatively. In total, 3 stems were revised: 2 for infection and 1 for chronic hip dislocation. The median patient satisfaction score was 95 (interquartile range [IQR], 80 to 100), median UCLA score was 6 (IQR, 6 to 7), median WOMAC score was 18 (IQR, 16 to 22), median OHS was 40 (IQR, 36 to 47), and median FJS was 80 (IQR, 76 to 88) at the time of final follow-up. All Wagner Cone stems that were not revised showed radiographic evidence of osseointegration, with a mean stem subsidence of 0.9 ± 0.8 mm at the most recent follow-up.

CONCLUSIONS

The use of the Wagner Cone Prosthesis stem in patients with complex femoral anatomy undergoing primary THA is associated with excellent component survivorship, high levels of patient satisfaction, good functional outcomes, and reliable osseointegration with minimal stem subsidence as seen on radiographs at intermediate-term follow-up.

LEVEL OF EVIDENCE

Therapeutic Level IV . See Instructions for Authors for a complete description of levels of evidence.

Comparison of mid-term clinical and radiological results of short and conventional femoral stems in total hip arthroplasty

This study aims to answer the question: Which are superior-conventional or short femoral stems?. An Optymis stem was used as a short-femoral stem, and an Accolade II stem was used as a conventional-femoral stem. There were 95 patients in the short femoral stem group (Group 1) and 90 in the conventional stem group (Group 2). The SF-36 Life Quality Score, thigh pain, and the Harris Hip Score were used to evaluate the patients' clinical outcomes. Pre-operative, immediate post-operative, and final follow-up x-rays were used for radiological evaluation. Stem varus/valgus alignment, hip offset changing, acetabular anteversion/inclination changing, femoral migration, acetabular migration, periarticular ossification, and osteointegration evaluation were assessed for both groups. The mean follow-up time was 5.5 years for Group 1 and 5.2 years for Group 2. No significant difference existed between the two groups in terms of clinical scores (Harris Hip Score, SF-36). Thigh pain was significantly higher in Group 2 (p = 0.0001). As for radiological parameters, Group 1 exhibited more varus position-related results. In terms of angular stability, Group 1 was found to be more unstable than Group 2 (p = 0.0001). The power to reconstruct femoral offset was superior in Group 1. Periarticular ossification was more frequent in Group 2. Femoral osteointegration was denser proximally in Group 1 and distally in Group 2. When mid-term radiological and clinical results of both femoral stems are evaluated, they have no superiority over each other.

Quantification of trunnion damage in a series of intact total hip arthroplasty femoral stems previously identified to be at risk of catastrophic failure

BACKGROUND

Corrosion at the head-neck junction of femoral stems is a rare complication of total hip arthroplasty (THA) with manifestations ranging from subclinical wear to failure. Prior studies have identified a single femoral component design with an increased propensity for catastrophic trunnion failure. The purpose of the present study was to quantify trunnion damage of this femoral component retrieved from patients undergoing revision THA for non-trunnionosis indications.

METHODS

24 femoral components from a single manufacturer were identified for study inclusion. Each prosthesis underwent stereomicroscopic inspection. Corrosion and fretting scores were assigned per the Goldberg criteria to quadrants of the trunnion. Material loss was calculated based on cone angles across trunnion quadrants. This was carried out using a coordinate measuring machine that digitised each trunnion surface. Stems were compared to a series of femoral stems with the same trunnion design.

RESULTS

20 of the 24 (83%) trunnions demonstrated corrosion, all 24 trunnions demonstrated fretting. Corrosion scores did not statistically differ with respect to trunnion zone (p = 0.53), while fretting scores were higher in the inferior compared to the superior zones (p < 0.001). There was no significant difference in cone angles assessing material loss between stems (p = 0.25).

CONCLUSIONS

Evidence of trunnion damage was observed in each stem retrieved for non-trunnionosis revision. Fretting occurred more frequently about the inferior quadrants. However, digitised trunnion shapes were similar between compared stems exhibiting no material loss. Therefore, it is possible that previous reports of trunnion failures for this implant are not a systemic issue, and that further investigation is required.

Incidence and Predictors of Subsidence Using Modular, Tapered, Fluted Titanium Femoral Stems in Aseptic Revision Total Hip Arthroplasty

BACKGROUND

Tapered, fluted titanium (TFT) femoral stems have become the gold standard in revision total hip arthroplasty (rTHA). However, there is a paucity of data on TFT stem subsidence rates following aseptic rTHA. Subsidence can lead to instability, mechanical failure, leg-length discrepancy, and may require revision surgery. This study evaluated the incidences and predictors of TFT subsidence in aseptic rTHA.

METHODS

A total of 102 TFT femoral stems of 4 designs were retrospectively reviewed. Stem subsidence was measured on digital radiographs taken immediately after surgery and at standard clinical follow-up. Patient characteristics, risk factors for subsidence, revision etiologies, and implant characteristics were recorded. Patient-reported outcome measures were also evaluated for a subset of cases.

RESULTS

Overall, 12% of stems subsided >1 cm, and subsidence was minimal (<3 mm) in ≥64% of cases. From immediate postoperative to 1-month radiographic follow-up, 79% of stems subsided a mean of 2.9 mm (range, 0.1 to 12 mm). Beyond 1 month, subsidence was minimal for ≥77% of cases. In multivariate analyses, women and less femoral implant canal fill were associated with greater subsidence (P ≤ .034). The TFT stem design was not associated with early subsidence (P = .816). There were no modular junction fractures. There were 2 fractures and 2 subsidence-related revisions for aseptic loosening that occurred postoperatively.

CONCLUSIONS

The amount of subsidence in TFT stems was low and was detectable in the early (less than 1 year) postoperative period. Maximizing TFT stem fill within the femoral canal appears to reduce the risk of subsidence without increasing femoral fracture rates and should be the goal with implantation of these devices.

LEVEL OF EVIDENCE

IV-Case Series, No Control Group.

Differences in peri-hip articular pain after total hip arthroplasty between taper wedge stem and fit-and-fill stem

Background

Total hip arthroplasty (THA) for hip disorders helps to alleviate pain and improve active daily life. When determining the effects of medical therapy and the subsequent clinical results, patient quality of life (QOL) also needs to be assessed. Recently, patient-reported outcomes (PRO) have become important as evaluation criteria. This study aimed to evaluate patient QOL and various PRO between different types of cementless stems and to clarify the relationship between PRO and stem-cortical bone contact.

Methods

The study comprised 138 consecutive patients undergoing cementless THA for hip osteoarthritis. We assessed three different types of PRO: the Japanese Orthopaedic Association Hip-Disease Evaluation Questionnaire (JHEQ), patient's joint perception, and peri-hip articular joint pain (PHAP). We measured the state of contact between femur and implant by density mapping.

Results

No significant difference was noted in PRO between stem types based on the JHEQ and patient's joint perception. PHAP occurred more frequently in the patients with a taper wedge stem versus a fit-and-fill stem. In both groups, distal contact was associated with PHAP but not with JHEQ results and patient's joint perception.

Conclusion

The difference in PHAP between the two stem types groups was significant, with postoperative PHAP being higher with the taper wedge stem because of the more distal contact between the taper wedge stem and femur cortical bone.

RADIOGRAPHIC EVALUATION OF OSSEOINTEGRATION OF UNCEMENTED TARGOS® STEMS. A 5-YEAR FOLLOW-UP

Introduction

Total hip arthroplasty is a widespread treatment and is considered the gold standard in cases of hip osteoarthritis, with high rates of success in improving pain and function when well performed. After five years of follow-up, this study evaluates the osseointegration of uncemented Targos® collared stems in arthroplasties.

Methods

Observational study of 182 total hip arthroplasties performed in 2014 with Targos® cementless collared femoral stems (Lepine). Bone quality was assessed according to the Dorr scale and osseointegration according to the Engh score.

Results

The overall mean age was 56.5 years, consisting of 104 men (57.1%) and 103 women (56.6%). The osseointegration rate of the stems (total Engh>0) was 100%. There was no statistical difference between groups concerning age (p=0.262), gender (p=0.463), primary diagnosis (p=0.585), affected side (p=0.459), and degree of Dorr (p=0.857).

Conclusion

Targos® cementless collared femoral stems showed excellent osseointegration in all patients evaluated, regardless of age, gender, and preoperative bone quality. Moreover, spot welds observed on preoperative radiographs have the best association with implant osseointegration. Level of evidence IV, case series .

Ceramic-on-polyethylene hip arthroplasty reduces the risk of postoperative periprosthetic joint infection

Metal-on-polyethylene (MoP) total hip arthroplasty (THA) prostheses are known to release metal debris. Basic science studies suggest that metal implants induce a pro-inflammatory response that ultimately chemoattracts leukocytes including macrophages and neutrophils to the surgical site. This raises concern of higher risk of infection with these prostheses through the "trojan horse" mechanism by which neutrophils and macrophages transport intracellular pathogens from a remote site. This study compared the infection occurrence between MoP and ceramic-on-polyethylene (CoP) implants to determine if a higher infection rate in MoP is present. We reviewed a consecutive series of 6052 CoP and 4550 MoP primary THA patients from 2015 to 2019. The occurrence of periprosthetic joint infection at 2 years was defined according to the 2018 ICM definition. Statistical analysis consisted of descriptive statistics, univariate analysis, and regression modeling. When compared to CoP, MoP patients were older, included more females, had a higher body mass index, and more commonly affected by comorbidities according to Elixhauser's score. Total revisions were higher in the MoP group (3.19% vs. 2.41%) The absolute incidence of PJI was higher in MoP (2.40% vs. 1.64%). When we adjusted for confounding factors, MoP was found independently associated with a higher PJI risk. Despite MoP and CoP both being widely used for primary THA, we found a higher incidence of PJI in MoP patients. The association remained significant when controlled for possible confounders. We hypothesize that leukocyte recruitment to these implants may play a role and should be further investigated.

Current Trends in Revision Hip Arthroplasty: Indications and Types of Components Revised

BACKGROUND

The materials and techniques for both primary and revision total hip arthroplasty (THA) have changed over time. This study evaluated if the indications for revision THA, rates of components utilized (femoral or acetabulum, both, or head/liner exchange), length of stay (LOS), and payments to surgeons and facilities have also changed.

METHODS

A retrospective study, utilizing the PearlDiver database, of 38,377 revision THA patients from January 2010 through December 2018 was performed. Data included the indication for revision, components revised (femoral or acetabulum, both, or head/liner exchange), LOS, and payments. Indications and components were analyzed by logistic regression (Dunnett's post hoc test). Revision totals were analyzed with a linear regression model. Analysis of variance assessed changes in LOS and payments.

RESULTS

Patients' median age was 67 years (Q1-Q3: 59-74), and 58.7% were female. Revisions for dislocation decreased between 2010 and 2018 (odds ratio [OR] 0.82, 95% confidence interval [CI] 0.68-0.98). Revisions for component loosening increased (OR 1.54, 95% CI 1.25-1.91). Dislocation remained the most common indication (19.3%), followed by PJI (17.3%) and loosening (17.1%). Both-component (OR:1.45; 95% CI:1.25-1.67) and femoral component only revisions increased; acetabular component only and head/liner exchanges decreased. Acetabular (OR 0.57, 95% CI 0.47-0.70) and head/liner exchange (OR 0.29, 95% CI 0.20-0.43) revisions decreased, while both component exchange (OR 1.45, 95% CI 1.25-1.67) and femoral revisions (OR 1.17, 95% CI 0.99-1.37) increased. Average LOS (-0.68 days; P < .001) and surgeon payments decreased (-$261.8; P < .001) while facility payments increased ($4,211; P < .001).

CONCLUSION

Indications for revision THA in this database study changed over time, with revision for dislocation decreasing and revision for loosening increasing over time. Both component and femoral revisions increased, and acetabular component and head/liner exchanges decreased. It is possible that these associations could be attributed to a number of details, the method of femoral fixation, surgical approach, and cementing, all of which require additional study.

Intermediate to Long-Term Outcomes and Causes of Aseptic Failure of an At-Risk Femoral Stem

BACKGROUND

The Accolade TMZF is a tapered-wedge cementless metaphyseal-coated femoral stem that was widely utilized from 2002 to 2012. In recent years, there have been reports of early catastrophic failure of this implant. The purposes of the present study were to establish the long-term survival of this stem and to analyze patients who underwent aseptic revision to understand the causes and risk factors for failure.

METHODS

We retrospectively reviewed the records of all patients who had undergone primary total hip arthroplasty with use of an Accolade TMZF stem at a high-volume arthroplasty center. The causes and timing of revision surgery were documented. Survivorship analysis was performed with use of Kaplan-Meier curves to determine the overall and aseptic survival rates at the time of the latest follow-up. Patient and implant factors commonly associated with aseptic failure were extracted, and a Cox proportional hazards model was used.

RESULTS

A consecutive series of 2,609 patients who had undergone unilateral primary total hip arthroplasty with use of an Accolade TMZF femoral stem were included. The mean time from the primary procedure was 11.3 years (range, 0 days to 19.4 years). The cumulative survival rate was 95.5% ± 0.1% at the time of the latest follow-up. One hundred and seven patients underwent revision surgery, with aseptic loosening of the femoral component being the most common cause of aseptic failure in this cohort (33 of 2,609; 1.3%). Smaller femoral size and larger femoral head offset were independent risk factors for aseptic failure.

CONCLUSIONS

To our knowledge, this is the largest series representing the longest follow-up of this tapered-wedge cementless femoral implant. Despite early concerns, the Accolade TMZF stem had excellent survivorship in this cohort. Trunnionosis as the cause for revision surgery was rare.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Bone morphology of the proximal femoral canal: ethnicity related differences and the influence on cementless tapered wedge stem designs

BACKGROUND

Differences in proximal femoral morphology between ethnicities may have implications on the design of cementless tapered wedge stems. This study analyses the differences in Asian and Caucasian bone morphology as well as the related fit of various cementless tapered wedge stem designs.

METHODS

A computed tomography database and modelling software was used to retrospectively analyse a total of 1345 femora. Ethnicity related comparisons as well as the fit of the stem designs were analysed.

RESULTS

Statistically significant differences between canal shape of Caucasian and Japanese as well as non-Japanese Asians were observed. The fit of the stems within the femoral canal was highly dependent on the respective stem shape.

CONCLUSIONS

The shape differences in stem designs had a larger influence on the fit within the femoral canal than the differences in ethnicity related to bone morphology.

Fully hydroxyapatite-coated collared femoral stems in direct anterior versus direct lateral hip arthroplastyFully hydroxyapatite-coated collared femoral stems in direct anterior versus direct lateral hip arthroplasty

Background

Total hip arthroplasty (THA) via the direct anterior approach has increased in popularity in the last decade, with research supporting enhanced early recovery; however, some investigators have reported increased early revision rates in direct anterior THA. We examined outcomes from a single institution's experience with a fully hydroxyapatite-coated collared femoral stem implanted via the anterior or the lateral approach.

Methods

Patients who had received fully hydroxyapatite-coated collared femoral stems as part of THA surgery performed by 1 of 3 surgeons between January 2012 and September 2017 were identified from our institutional database. We examined revision rates for the 2 approaches and compared them between the 2 groups. We also analyzed outcomes on plain film radiographs obtained immediately postoperatively and at 1 and 2 years.

Results

A total of 695 patients received a fully hydroxyapatite-coated collared stem during the study period. Total hip arthroplasty was performed via the direct anterior approach in 281/778 hips (36.1%) and via the direct lateral approach in 497 (63.9%). Nineteen patients (2.5%) underwent subsequent revision surgery; there was no statistically significant difference in the revision rate between the anterior and lateral approaches (2.5% v. 2.4%, p = 0.95). The mean subsidence of the stem at 1 year was 1.68 mm (standard deviation 11.7 mm). No statistically significant differences were observed between the cohorts for any of the radiographic measurements at either follow-up time.

Conclusion

We found no significant difference in revision rates between the direct anterior and direct lateral approach. Stem subsidence levels were in keeping with expected values, and no major changes in stem position occurred during the first postoperative year. Surgical approach did not appear to substantially affect biomechanical stem behaviour.

Wagner Cone Midterm Survivorship and Outcomes

BACKGROUND

Total hip arthroplasty (THA) in patients with abnormal proximal femoral anatomy requires an individualized treatment approach to prevent complications. Metaphyseal engaging stems in this population risk fracture, size/offset mismatch, and aseptic loosening. The Wagner conical femoral implant is a short diaphyseal engaging femoral stem that could improve treatment success in this difficult patient population.

METHODS

We identified 302 consecutive patients undergoing THA using the Wagner cone femoral prosthesis between January 2010 and January 2017. Clinical, radiographic, and patient-reported outcomes were obtained through chart review and radiographic measurements of postoperative X-rays. We used multivariate analysis to determine predictors of poor outcomes. Kaplan-Meier curves were created to demonstrate implant survivorship with reoperation and revision as endpoints. The average follow-up was 3.2 years, with a minimum of 2 years.

RESULTS

The implant retention survival rate during the 3.2-year study period was 98.7%. The overall reoperation rate was 4.2%, with infection followed by fracture being the most common reasons for reoperation. No patients were revised for aseptic loosening, and no patients were revised for subsidence. The average subsidence was 1.1 mm. The Harris Hip Score improved from 48.6 ± 7.3 (range, 28-64) preoperatively to 86.1 ± 8.5 (range, 66-100) at latest follow-up. The patient-reported satisfaction rate was 98.3%.

CONCLUSION

The Wagner cone femoral prosthesis demonstrated excellent clinical, radiographic, and patient-reported functional outcomes at midterm follow-up. We recommend use of the Wagner cone in THA patients with challenging proximal femoral anatomy, small femoral diameter, or poor metaphyseal bone quality.

Inadequate Metadiaphyseal Fill of a Modern Taper-Wedge Stem Increases Subsidence and Risk of Aseptic Loosening: Technique and Distal Canal Fill Matter!

BACKGROUND

Adequate interference fit and mechanical stability through optimal surgical technique are essential to prevent subsidence and loosening in cementless total hip arthroplasty. The purpose of this study is to determine the effect of surgical technique on radiographic subsidence and subsequent stability of a modern taper-wedge cementless stem.

METHODS

A retrospective review of 250 consecutive cementless primary total hip arthroplasties performed by 2 surgeons was completed. Surgeon A vigorously broached, maximizing the mediolateral stem dimension and confirmed final broach stability with a torsional test, whereas Surgeon B did not. All patients received identical taper-wedge stems. Preoperative bone morphology (canal flare index), postoperative subsidence, and canal fill were radiographically assessed.

RESULTS

Canal flare index was not different between groups (P = .747). There was significantly less subsidence at 1 month for Surgeon A (0.3 vs 1.3 mm, P < .001). Additional subsidence at 1 year occurred in only 0.8% of Surgeon A (1/119) compared to 51.6% of Surgeon B stems (33/64, P < .001). Surgeon technique and canal fill measured at 60 mm below the lesser trochanter were the only variables predictive for subsidence, where Surgeon A and B had a mean canal fill of 95% and 86%, respectively. Surgeon B had 2 cases of aseptic loosening (2%) at 2 and 3 years postoperatively.

CONCLUSION

These observations support that maximizing mediolateral canal fill and avoiding under-sizing the femoral implant with meticulous broaching technique minimizes subsidence and optimizes stability of modern cementless taper-wedge stems. Failure to optimize canal fill with appropriate broaching and surgical technique may predispose femoral components to failure from aseptic loosening.

Blood and plasma titanium levels associated with well-functioning hip implants

BACKGROUND

Hip implants are usually manufactured from cobalt-chromium and titanium alloys. As the implants wear and corrode, metal debris is released into the surrounding tissue and blood, providing a potential biomarker for their function. Whilst there are laboratory reference levels for blood cobalt and chromium in patients with well and poorly functioning hip implants, there are no such guidelines for titanium. This is despite the increasing use of titanium implants worldwide.

PATIENTS AND METHODS

We recruited a consecutive series of 95 patients (mean age 71 years, mean time after surgery 8.5 years) with one hip implant type, inserted by the same surgeon. We assessed clinical and radiological outcome, and measured blood and plasma titanium using high resolution inductively-coupled plasma mass spectrometry.

RESULTS

The upper normal reference limit for blood and plasma titanium was 2.20 and 2.56 μg L^-1, respectively, and did not differ significantly between males and females.

CONCLUSION

We are the first to propose a laboratory reference level for blood and plasma titanium in patients with well-functioning titanium hip implants. This is an essential starting point for further studies to explore the clinical usefulness of blood titanium as a biomarker of orthopaedic implant performance, and comes at a time of considerable controversy regarding the use of certain titanium alloys in hip arthroplasty.

The Effect of Hot Working on the Mechanical Properties of High Strength Biomedical Ti-Nb-Ta-Zr-O Alloy

Beta titanium alloy Ti-35Nb-6Ta-7Zr-0.7O (wt%) was developed as a material intended for the manufacturing of a stem of a hip joint replacement. This alloy contains only biocompatible elements and possesses a very high yield strength already in the cast condition (900 MPa). However, the porosity, large grain size and chemical inhomogeneity reduce the fatigue performance below the limits required for utilization in the desired application. Two methods of hot working, die forging and hot rolling, were used for processing of this alloy. Microstructural evolution, tensile properties and fatigue performance of the hot worked material were investigated and compared to the cast material. Microstructural observations revealed that porosity is removed in all hot-worked conditions and the grain size is significantly reduced when the area reduction exceeds 70%. Static tensile properties were improved by both processing methods and ultimate tensile strength (UTS) of 1200 MPa was achieved. Fatigue results were more reproducible in the hot rolled material due to better microstructural homogeneity, but forging leads to an improved fatigue performance. Fatigue limit of 400 MPa was achieved in the die-forged condition after 70% of area reduction and in the hot rolled condition after 86% of area reduction.

The Accolade TMZF stem fulfils the demands of modern stem design: Minimum 5-year survival in a cohort of 937 patients

PURPOSE

Modern hip stem design includes a prosthesis that has a predictable outcome in all total hip arthroplasty (THA) patients, regardless of approach, surgeon or patient characteristics. Introduction without a learning curve and, in cases of problems, the possibility for a simple revision are other prerequisites. The purpose of this study is to evaluate whether the Accolade TMZF stem (Stryker Orthopedics, Mahwah, New Jersey, USA) is suitable to fulfil these demands. We report our mid-term survival of the Accolade TMZF hip stem in all patients from the first implantation at our institute.

METHODS

From the start of using the Accolade TMZF stem (March 2009) until February 2011, 937 THA were performed by 12 surgeons using a posterolateral or anterolateral approach. Survival of the stem was calculated using Kaplan-Meier analysis. Effect of approach, patient age and comorbidity were analysed with a Cox proportional hazards' model. The learning effect was determined by comparing the number of revisions in the surgeons' first 20 THAs with their next 30 THAs and the subsequent THAs.

RESULTS

At 5 years, cumulative stem survival was 97.9% based on revisions for all reasons and 98.8% with aseptic loosening as endpoint. We found no effect of surgical approach, patient age or comorbidity on stem survival. No learning effect was found.

CONCLUSION

The Accolade TMZF stem fulfilled the demands of modern stem design.

Incidence of a stem sitting proud of a proximally coated cementless tapered wedge stem

BACKGROUND/OBJECTIVE

A stem sitting proud (SP) or that above the final rasp position remains in some patients who undergo hip replacement using proximally coated tapered wedge stems. Surgeons may face challenges providing the best fit because of unpredictable SP of proximally coated tapered wedge stems. Zimmer Inc. introduced a new rasp to solve this issue but the clinical results of this rasp have not yet been published. Therefore, our aim was to address the following: (1) What is the stem SP incidence using a proximally coated cementless tapered wedge stem? (2) Does the new rasp system (0-mm rasp) improve seating height? and (3) What are the risk factors of stem SP?

METHODS

We performed a retrospective study with 338 hips, in which Tri-Lock Bone Preservation Stem (BPS) was used in 181 hips and M/L Taper stem was used in 157 hips (82 hips before and 75 hips after 0-mm rasp use). A positive stem SP was defined as a stem proud height of >2 mm. We analysed and compared SP incidence in two stems and M/L Taper stems before and after the 0-mm rasp use.

RESULTS

An incidence of stem SP was 13% in the Tri-Lock BPS and 15% in the M/L Taper stem before the 0-mm rasp use. Stem SP incidence in the M/L Taper stem substantially decreased after the 0-mm rasp use (4%). The significant risk factor for stem SP was use of the high offset option in Tri-Lock BPS.

CONCLUSION

The proximally coated tapered wedge stems present potential problems related to stem SP. The new rasp of the M/L Taper stem showed significant improvement in initial seating height.

THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE

This study was conducted to understand "stem sitting proud" in proximally coated tapered wedge stem as one of the most popular designs nowadays in adult hip joint arthroplasty field. In this study, we aimed to address the incidence of stem proud, investigated the risk factor and introduced the effect of new rasp system which improve stem seating height.

Total hip arthroplasty with accolade/trident through the direct minimally invasive anterior approach without traction table: Learning curve and results after a minimum of 5 years

BACKGROUND

The direct minimally invasive anterior approach (DMIAA) in total hip arthroplasty (THA) is widely accepted. In our department the DMIAA according to Rachbauer together with the Trident cup and Accolade stem was introduced in 2004. The purpose of the study was to demonstrate the five-year results and to analyze the learning curve of a new introduced approach.

PATIENTS AND METHODS

Between July 2004 and May 2006, a consecutive series of 151 THA in 147 patients was retrospectively analyzed. All patients were planned to received a THA with the Accolade/Trident implant system using the DMIAA without traction table. Clinical and radiographic data, complications and survivorship were documented with a follow-up of at least 5 years.

RESULTS

Regarding cup implantation, there were 11 (7.3%) failed intentions to treat due to missing pressfit (8 cases) and acetabular floor perforation (3 cases). No failed intentions to treat occurred during stem implantation. Total implant survival after 5 years follow-up after exclusion of 11 cases with failed intention to treat (N=140) was 96.9% (SD 1.4; CI 94.3-99.6). After exclusion of the failed intentions to treat (N=140, N=4 in the first 20 cases), there was significant (p<0.001) difference between the first 16 implants with a 5 year-survival of 83.2% (SD 8.6; CI 66.4-100) and 95.7% (SD 0.9; CI 93.9-97.5) for the following 124 implants. Radiolucent lines were observed in Gruen zone 1 in 3.3% and in Gruen zone 1 and 2 in 1.1%.

DISCUSSION

THA with Accolade/Trident using the DMIAA without traction table according to Rachbauer temporary exposed patients to a higher risk of implant revisions, which was normalized after the first 20 cases. Results of the learning curve are comparable to other techniques using an orthopaedic traction table. After the typical learning curve, the rate of 5 years implant failure is in accordance with the registry data for non-cemented implants. The Accolade stem showed minimal radiographic signs of radiolucency.

LEVEL OF EVIDENCE

IV, retrospective, consecutive case series.

Is computerised 3D templating more accurate than 2D templating to predict size of components in primary total hip arthroplasty?

INTRODUCTION

The aim of this study was to compare the accuracy of preoperative templating in total hip arthroplasty (THA) using conventional 2-dimensional (2D) and computed tomography (CT)-based 3-dimensional (3D) measures.

METHODS

One hundred and sixteen consecutive primary THAs were analysed. The preoperative diagnosis was primary osteoarthritis in all cases. The 2D templating and the 3D templating were performed by two different residents. All templating results were available for the orthopaedic surgeon performing the procedure. Accuracies with regard to the predicted and actual implant sizes were determined for each procedure. Implantation of the size as planned was defined as "exact", whereas the use of components within one size larger or smaller (±1) as planned were defined as "accurate."

RESULTS

The 3D templating was significantly more accurate in predicting implant sizing compared to 2D templating for primary total hip arthroplasty (THA). The difference was statistically significant for the cup templating (''exact'' p = 0.02; ''accurate'' p = 0.01) and for the stem templating (''exact'' p = 0.04; ''accurate'' p = 0.01).

CONCLUSION

Our results support the superiority of 3D templating over 2D templating in predicting implant size.

Head Taper Corrosion Causing Head Bottoming Out and Consecutive Gross Stem Taper Failure in Total Hip Arthroplasty

BACKGROUND

Taper corrosion in total hip arthroplasty for bearings with metal heads against polyethylene has developed from an anecdotal observation to a clinical problem. Increased taper wear and even gross taper failure have been reported for one particular design. It is hypothesized that corrosion of the female head taper results in taper widening, allowing the cobalt-chromium head to turn on the stem and wear down the softer titanium alloy by abrasive wear, ultimately causing failure. The purpose of this study is to investigate the time course of this process and the general role of taper dimensions and material in this problem.

METHODS

Retrieved cobalt-chromium alloy heads (n = 30, LFIT; Stryker, Mahwah, NJ) and Ti-12Mo-6Zr-2Fe (TMZF) stems (n = 10, Accolade I; Stryker) were available for analysis. Taper material loss was determined using three-dimensional coordinate measurements and scanning. The pristine tip clearance between head and stem was analytically determined. The influence of taper material and taper size on taper deformation and micromotion was investigated using a finite element model.

RESULTS

Material loss at the head taper increased with time in situ up to a volume of 20.8 mm³ (P < .001). A mean linear material loss above 76 μm at the head taper was analytically confirmed to result in bottoming out, which was observed in 12 heads. The finite element calculations showed significantly larger deformations and micromotions for a small 11/13 TMZF taper combined with a distinctly different micromotion pattern compared to other materials and taper designs.

CONCLUSION

A 11/13 TMZF taper design with 36-mm head diameters bears a higher risk for corrosion than larger tapers made from stiffer materials. Failures of this combination are not restricted to the head sizes included in the recall. Patients with this implant combination should be closely monitored.

Reduced Incidence of Intraoperative Femur Fracture With a Second-Generation Tapered Wedge Stem

BACKGROUND

Intraoperative fractures during total hip arthroplasty (THA) are more common when using cementless stems. The purpose of this study was to investigate the impact of a new shorter second-generation cementless, tapered wedge stem with improved proximal femoral fit in reducing the incidence of intraoperative fracture.

METHODS

A retrospective study was conducted on primary THA cases performed at a single institution using a first-generation or second-generation cementless stem from 2006-2016. All intraoperative femur fractures were identified, as well as early 30-day postoperative periprosthetic femur fractures, which could represent nondisplaced intraoperative fractures that were initially missed. Risk for intraoperative femur fracture was analyzed using logistic regression, accounting for demographic covariates and surgeon.

RESULTS

Of 6473 primary THA performed with a cementless, tapered wedge stem during the study period, 3126 used a first-generation stem and 3347 used a second-generation stem. The incidence of intraoperative fracture was 1.79% for first-generation stems and 0.24% for second-generation stems, representing a 7.5-fold reduction of risk for fracture. After accounting for covariates, the odds of intraoperative fracture were 0.33 using the second-generation stem relative to the first-generation stem (P = .01). However, there was no significant difference in the odds of early 30-day postoperative fractures using the second-generation stem (odds ratio 0.93, P = .56).

CONCLUSION

A new second-generation cementless stem resulted in a 7.5-fold decrease in the incidence of intraoperative femur fracture compared with the preceding stem.

Total Hip Intraoperative Femur Fracture: Do the Design Enhancements of a Second-Generation Tapered-Wedge Stem Reduce the Incidence?

BACKGROUND

Intraoperative femur fracture (IFF) is a well-known complication in primary uncemented total hip arthroplasty (THA). Variations in implant instrumentation design and operative technique may influence the risk of IFF. This study investigates IFF between a standard uncemented tapered-wedge femoral stem and its second-generation successor with the following design changes: size-specific medial curvature, proportional incremental stem growth, modest reduction in stem length, and distal lateral relief.

METHODS

A single experienced surgeon's patient database was retrospectively queried for IFF occurring during primary uncemented THA using a standard tapered-wedge femoral stem system or a second-generation stem. All procedures were performed using soft tissue preserving anatomic capsule repair and posterior approach. The primary outcome measure was IFF. A z-test of proportions was performed to determine significant difference between the 2 stems with respect to IFF. Patient demographics, Dorr classification, and implant characteristics were also examined.

RESULTS

Forty-one of 1510 patients (2.72%) who received a standard tapered-wedge femoral stem sustained an IFF, whereas 5 of 800 patients (0.63%) using the second-generation stem incurred an IFF. No other significant associations were found.

CONCLUSION

A standard tapered-wedge femoral stem instrumentation system resulted in greater than 4 times higher incidence of IFF than its second-generation successor used for primary uncemented THA. Identifying risk factors for IFF is necessary to facilitate implant system improvements and thus maximize patient outcomes.

Preoperative Planning and Operative Techniques of the Shorter Tapered Stem Compared to the Metaphyseal Fit Stem in Cementless Total Hip Arthroplasty

BACKGROUND

In order to prevent postoperative dislocation due to prosthetic impingement as a result of total hip arthroplasty (THA), the combined anteversion (CA) theory, which combines the anteversion of the femoral stem and the acetabular socket, has been revised in recent years. Particularly, it is necessary to keep CA within the target zone.

METHODS

The aim of this study was to investigate whether postoperative CA can be kept within the target zone while using the operative technique which prepares the socket first in cementless THA, by estimating the anteversion of the metaphyseal fit stem or the shorter, tapered wedge stem using preoperative 3-dimensional computerized planning, and by adjusting the anteversion of the socket using a navigation system that considers CA. One hundred fourteen patients (118 hips) were recruited for the study.

RESULTS

Postoperative CA in THA using the metaphyseal fit stem was kept within the target zone for 56 of the 60 hips (93.3%). Using the shorter, tapered wedge stem, 49 of the 58 hips (84.4%) were within the target zone. No postoperative dislocations were observed in any hips.

CONCLUSION

We found that the metaphyseal fit stem worked better than the shorter, tapered wedge stem in terms of meeting the planned CA. The shorter, tapered wedge stems were flexible in rotation according to the anatomical configuration of the proximal femur. Therefore, the stem could be placed second with the metaphyseal fit stem, but we recommend placing the stem first with the shorter, tapered wedge stem.

Cementless Tapered Wedge Femoral Stems Decrease Subsidence in Obese Patients Compared to Traditional Fit-and-Fill Stems

BACKGROUND

Femoral component stability and resistance to subsidence is critical for osseointegration and clinical success in cementless total hip arthroplasty. The purpose of this study was to radiographically evaluate the anatomic fit and subsidence of 2 different proximally tapered, porous-coated modern cementless femoral component designs.

METHODS

A retrospective cohort study of 126 consecutive cementless total hip arthroplasties was performed. Traditional fit-and-fill stems were implanted in the first 61 hips with the remaining 65 receiving morphometric tapered wedge stems. Preoperative bone morphology was radiographically assessed by the canal flare index. Canal fill in the coronal plane, subsidence, and the sagittal alignment of stems was measured digitally on immediate and 1-month postoperative radiographs.

RESULTS

Demographics and canal flare indices were similar between groups. The percentage of femoral canal fill was greater in the tapered wedge compared to the fit-and-fill stem (P = .001). There was significantly less subsidence in the tapered wedge design (0.3 mm) compared to the fit-and-fill design (1.1 mm) (P = .001). Subsidence significantly increased as body mass index (BMI) increased in the fit-and-fill stems, a finding not observed in the tapered wedge design (P = .013).

CONCLUSION

An anatomically designed morphometric tapered wedge femoral stem demonstrated greater axial stability and decreased subsidence with increasing BMI than a traditional fit-and-fill stem. The resistance to subsidence, irrespective of BMI, is likely due to the inherent axial stability of a tapered wedge design and may be the optimal stem design for obese patients.

Is Model-based Radiostereometric Analysis Suitable for Clinical Trials of a Cementless Tapered Wedge Femoral Stem?

BACKGROUND

In clinical trials of THA, model-based radiostereometric analysis (RSA) techniques may be less precise than conventional marker-based RSA for measurement of femoral stem rotation. We verified the accuracy and clinical precision of RSA based on computer-aided design models of a cementless tapered wedge femoral stem.

QUESTIONS

We asked: (1) Is the accuracy of model-based RSA comparable to that of marker-based RSA? (2) What is the clinical precision of model-based RSA?

METHODS

Model-based RSA was performed using combined three-dimensional computer-aided design models of the stem and head provided by the implant manufacturer. The accuracy of model-based RSA was compared with that of marker-based RSA in a phantom model using micromanipulators for controlled translation in three axes (x, y, z) and rotation around the y axis. The clinical precision of model-based RSA was evaluated by double examinations of patients who had arthroplasties (n = 24) in an ongoing trial. The clinical precision was defined as being at an acceptable level if the number of patients needed for a randomized trial would not differ from a trial done with conventional marker-based RSA (15-25 patients per group).

RESULTS

The accuracy of model-based RSA was 0.03 mm for subsidence (translation along the y axis) (95% CI for the difference between RSA measurements and actual displacement measured with micrometers, -0.03-0.00) and 0.39° for rotation around the y axis (95% CI, -0.41 to -0.06). The accuracy of marker-based RSA was 0.06 mm for subsidence (95% CI, -0.04-0.01; p = 0.728 compared with model-based RSA) and 0.18° for the y axis rotation (95% CI, -0.23 to -0.07; p = 0.358). The clinical precision of model-based RSA was 0.14 mm for subsidence (95% CI for the difference between double examinations, -0.02-0.04) and 0.79° for the y axis rotation (95% CI, -0.16-0.18).

CONCLUSIONS

The accuracy of model-based RSA for measurement of the y axis rotation was not quite as high as that of marker-based RSA, but its clinical precision is at an acceptable level.

CLINICAL RELEVANCE

Model-based RSA may be suitable for clinical trials of cementless tapered wedge femoral stem designs.

Catastrophic Femoral Head-Stem Trunnion Dissociation Secondary to Corrosion

BACKGROUND

Modular femoral heads provide procedural enhancement by allowing accurate restoration of hip offset and limb-length equalization. However, corrosion may lead to adverse local tissue reactions. Severe trunnion corrosion can also lead to femoral head dissociation and catastrophic implant failure following primary total hip arthroplasty.

METHODS

We describe 5 cases, from our institution, in which the femoral head became dissociated from the femoral stem trunnion secondary to severe corrosion. Possible causes are evaluated.

RESULTS

Demographic commonalities among the 5 patients included a body mass index (BMI) of ≥30 kg/m(2) and male sex. All femoral heads were made of cobalt-chromium alloy and were larger-diameter implants (≥36 mm). Four of the 5 patients had a femoral head that increased the neck length above the default on a so-called standard head and 3 of the 5 had a stem with a 127° neck-shaft angle.

CONCLUSIONS

Although dissociation of the femoral head from the femoral trunnion following total hip arthroplasty is exceedingly rare, the prevalence may increase with longer follow-up. The dissociation is likely related to multiple factors, including a BMI of ≥30 kg/m(2), male sex, and corrosion resulting from the use of a larger metal head with a neck length of greater than the default and a stem with high offset. It is critical that surgeons be able to recognize this mode of implant failure and appropriately prepare to remove the femoral component during revision surgery.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Prospective evaluation of short and mid-term outcomes of total hip arthroplasty using the Accolade™ stem

PURPOSE

Cementless press-fit total hip arthroplasty (THA) with the Accolade stem (Stryker AccoladeTM TMZF, Mahwah, New Jersey) has demonstrated variable implant survivorship and outcomes. The purpose of this study was to analyse the: 1) implant survivorship; 2) complications; 3) functional outcomes; 4) overall quality of life; and 5) patient expectations and satisfaction following THA with this particular press-fit stem.

METHODS

A prospectively collected database of 222 patients who underwent THA at 7 institutions between 2006 and 2009 using the Accolade stem (Stryker Inc. Mahwah, New Jersey) was evaluated. Harris Hip Score (HHS) and SF-12 were used to assess the outcomes at 2- and 5-year follow-up. Kaplan-Meier survivorship was calculated at 5 years of follow-up.

RESULTS

The 5-year aseptic and all-cause survivorship rates were 99.4% (95% CI, 96.3 to 99.9%) and 97.9% (95% CI, 94.6 to 99.2%), respectively. At 2 and 5 years postoperatively, the patients demonstrated a mean HHS of approximately 89 points and 92 points, respectively. The mental and physical components of the SF-12 mean score increased with the physical component having a more marked increase. The mental and physical components of the SF-12 score increased to a mean of 46 and 45 points at 2 and 5 years, respectively. At 2-year follow-up, over 90% of patients were satisfied with their outcome in a majority of areas surveyed.

DISCUSSION

Our results suggest that the use of this press-fit construct results in tremendous improvements in functional and quality of life outcomes, along with excellent survivorship at short- and mid-term follow-up.

Difference in Postoperative Periprosthetic Bone Mineral Density Changes Between 3 Major Designs of Uncemented Stems: A 3-Year Follow-Up Study

BACKGROUND

Although few studies have examined the direct effect of stress shielding on clinical outcomes, periprosthetic bone loss due to stress shielding is still an issue of concern, especially when physicians perform uncemented total hip arthroplasty (THA) in younger patients. Differences in femoral stem design may affect the degree of postoperative stress shielding. Therefore, the characteristics of the behavior for stress shielding of each type of femoral stem should be determined. This study compares differences in bone mineral density (BMD) change in the femur after primary THA between 3 major types of uncemented stems.

METHODS

Among a total of 89 hips, 26 hips received THA with a fit-and-fill type stem (VerSys Fiber Metal MidCoat; Zimmer, Inc, Warsaw, IN), 32 hips received a tapered rectangular Zweymüller-type stem (SL-Plus; Smith & Nephew Inc, Memphis, TN), and 31 received a tapered wedge-type stem (Accolade TMZF; Stryker Orthopaedics, Mahwah, NJ). BMD measurements were performed with a HOLOGIC Discovery device (Hologic Inc, Waltham, MA).

RESULTS

BMD in the medial-proximal femur was maintained for 3 years after THA in the group with the tapered wedge-type stem. BMD in the lateral-proximal femur was maintained for 3 years after THA in the group with the Zweymüller-type stem. There were no significant differences in the Harris Hip Score among the 3 stem groups preoperatively and 1, 2, and 3 years after surgery.

CONCLUSION

There are clear differences in postoperative BMD loss of the proximal femur among these 3 commonly used uncemented stems.

Catastrophic Head-Neck Dissociation of a Modular Cementless Femoral Component

CASE

We report two cases of modular head-neck junction failure involving the Stryker Accolade TMZF stem leading to sudden dissociation of the femoral head from the stem. Both patients presented with mechanical symptoms in the hip followed by pain and hip dysfunction. Disassembly of the head and deformation of the male taper were seen on preoperative radiographs. Intraoperatively, both patients had substantial metallosis with a markedly damaged taper requiring stem revision.

CONCLUSION

We recommend regular clinical and radiographic surveillance of patients with the Stryker Accolade TMZF stem, especially those patients with pain and/or mechanical symptoms.

Development and verification of a cementless novel tapered wedge stem for total hip arthroplasty

Most current tapered wedge hip stems were designed based upon the original Mueller straight stem design introduced in 1977. These stems were designed to have a single medial curvature and grew laterally to accommodate different sizes. In this preclinical study, the design and verification of a tapered wedge stem using computed tomography scans of 556 patients are presented. The computer simulation demonstrated that the novel stem, designed for proximal engagement, allowed for reduced distal fixation, particularly in the 40-60 year male population. Moreover, the physical micromotion testing and finite element analysis demonstrated that the novel stem allowed for reduced micromotion. In summary, preclinical data suggest that the computed tomography based stem design described here may offer enhanced implant fit and reduced micromotion.

Primary Total Hip Arthroplasty Using Third Generation Ceramic-Ceramic Articulation: Results after a Minimum of Three-years of Follow-up

Purpose

This study assessed the short term clinicoradiological results of primary total hip arthroplasty using third generation ceramic-ceramic articulation Accolade TMZF femoral stems.

Materials and Methods

Two hundred and seventy two patients (294 hips) with primary total hip arthroplasty using third generation ceramic-ceramic articulation Accolade TMZF femoral stems who had been followed-up for a minimum of 3 years were included. Clinicoradiological results were analyzed and postoperative complications were observed.

Results

At final follow-up, mean Harris hip score was increased from 52 to 94 points. On radiogical evaluation, the average acetabular inclination was 42 degrees and the average acetabular anteversion was 15 degrees. Neither osteolysis nor loosening were observed around the acetabulum or proximal femur. Among 294 acetabular cups, 293 cups (99.66%) achieved stable fixation. Regarding the 294 femoral stems, 286 (97.28%) had bony fixation, 7 (2.38%) had fibrous fixation, and none were found to have unstable stem fixation. Proximal bone resorption was observed in 17 hips (5.78%; only Grade 1) and radiolucent lines were observed in 88 hips (29.93%), however, all were around the distal smooth portion of the stems. Postoperative complications included dislocation in 6 hips (2.04%), heterotopic ossification in 3 hips (1.02%), ceramic fractures in 4 hips (1.36%), superficial infection in 1 hip (0.34%), and squeaking in 8 hips (2.72%).

Conclusion

The short term clinicoradiological results of primary total hip arthroplasty using third generation ceramic-ceramic articulation and Accolade TMZF femoral stems together with Secur-Fit acetabular cups were satisfactory. However, problems such as ceramic fractures and squeaking after arthroplasty were observed. Additional studies are necessary in order to develop methods that may reduce or eliminate these complications.

Radiographic fit and fill analysis of a new second-generation proximally coated cementless stem compared to its predicate design

The purpose of this study was to compare in vivo fit and fill analysis of a new second-generation proximally coated cementless stem compared to its predicate design. This prospective trial of 100 total hip arthroplasties compared specific radiographic "Fit and Fill" parameters between the two designs. Fit type was assessed by comparing the type of canal fill. Post-operative fill parameters such as mean stem-to-canal ratios and mean minimum and maximum gaps between the stems to the cortical bone in different sections and areas were compared. A significantly higher proportion of the second-generation stems had Type I fit (82% vs. 54%), had better stem to canal fill ratio in the middle (90.6% vs. 85.3%) and distal sections (88.1% vs. 78.6%) compared to the older design. The new second-generation stem design had a significantly better canal fit and distal canal fill in the medial and lateral portions.

Results of a tapered proximally-coated primary cementless stem for revision hip surgery

Nineteen patients (nineteen hips) who had undergone revision total hip arthroplasties using a proximally-coated primary cementless stem were evaluated to determine if a subset of revision arthroplasty patients could be identified where the use of this stem would be appropriate. Of these 19 revisions, 15 were performed for the second stage treatment of infection. The femoral bone deficiency was classified as Paprosky Type I in 6 hips and Type II in 13 hips. At a mean follow-up of 49 months, aseptic stem survivorship was 95% with one revision due to aseptic stem failure. The mean Harris hip scores had improved from a mean of 44 points pre-operatively to 89 points post-operatively. Intra-operatively, there was one complication which included a peri-prosthetic fracture distal to the stem which was treated with an allograft strut with cerclage wires. The authors believe that in type I or II femoral defects, the use of this specific cementless stem may be beneficial in the setting of a revision total hip arthroplasty.

Minimum 5-year follow-up for primary THA using a tapered, proximally coated cementless stem

The purpose of this study was to assess the survivorship of a proximally coated, cementless femoral stem used for total hip arthroplasty at a minimum 5-year follow-up by assessing clinical outcomes and implant survival. A total of 936 primary total hip arthroplasties were performed in 854 patients by 3 high-volume surgeons between 2001 and 2007. Patients included 385 men and 469 women with a mean age of 56 years (range, 20-88 years) and a mean follow-up of 7 years (range, 5-11 years). The aseptic revision rate related to the femoral component was 0.3%. Three patients underwent revision of the femoral component. Mean postoperative Harris Hip Score improved to 91 points (range, 70-100 points). When stratified by primary cause of total hip arthroplasty, no differences were found in implant survivorship or postoperative Harris Hip Scores. With the exception of the 3 patients who underwent revision surgery, postoperative radiographic evaluation of the stems demonstrated no progressive radiolucencies, component malalignment, change in component position, or implant subsidence at most recent follow-up.These results are encouraging and indicate a 0.3% revision rate for the femoral component. The cause of primary total hip arthroplasty did not affect the clinical outcomes. These types of prostheses will provide patients with a stable implant that is expected to have excellent durability and longevity.

Bipolar hemiarthroplasty for femoral neck fracture using the direct anterior approach

AIM: To evaluate whether walking ability recovers early after bipolar hemiarthroplasty (BHA) using a direct anterior approach.

METHODS: Between 2008 and 2010, 81 patients with femoral neck fracture underwent BHA using the direct anterior approach (DAA) or the posterior approach (PA). The mean observation period was 36 mo. The age, sex, body mass index (BMI), time from admission to surgery, length of hospitalization, outcome after discharge, walking ability, duration of surgery, blood loss and complications were compared.

RESULTS: There was no significant difference in the age, sex, BMI, time from admission to surgery, length of hospitalization, outcome after discharge, duration of surgery and blood loss between the two groups. Two weeks after the operation, assistance was not necessary for walking in the hospital in 65.0% of the patients in the DAA group and in 33.3% in the PA group (P < 0.05). As for complications, fracture of the femoral greater trochanter developed in 1 patient in the DAA group and calcar crack and dislocation in 1 patient each in the PA group.

CONCLUSION: DAA is an approach more useful for BHA for femoral neck fracture in elderly patients than total hip arthroplasty in terms of the early acquisition of walking ability.

Comparing the accuracy of radiographic preoperative digital templating for a second- versus a first-generation THA stem

This study assessed the accuracy of preoperative digital templating for a second-generation cementless stem compared with its first-generation design. A prospective cohort of 100 consecutive patients who had undergone a primary total hip arthroplasty using a new second-generation cementless stem was compared with the prior 100 hips that had received the first-generation stem. The authors believe that the second-generation stem may allow equal or more accurate digital templating compared with its predicate design.

Total hip arthroplasty at the rothman institute

BACKGROUND

Total hip arthroplasty (THA) is one of the most successful surgical interventions devised in modern times. Attempts to change the current THA procedure with unproven innovations bring the risk of increased failure rates while trying to improve the benefit of the surgery.

QUESTIONS/PURPOSES

This manuscript examines the evolution of THA at the Rothman Institute illustrating the key elements that lead the success of this procedure at this institution. These key elements include femoral stem design, use of highly crossed-linked polyethylene and use of pain and rehabilitation protocols. We attempted to describe the long-term results regarding safety, effectiveness, and durability of specific THA implant designs used at this institution drawing on reported evidence in the literature.

METHODS

The authors performed a review of peer-reviewed articles related to the Rothman Institute's experience with THA.

RESULTS

Total hip arthroplasty is an efficient, safe, and durable procedure. It is a highly successful operation to restore function and improve pain. The survivorship of THA procedures at the Rothman Institute is higher than 99% at 10 years based on mechanical failure. The use of collarless, tapered wedge femoral stem, highly crossed-linked polyethylene, and improved pain rehabilitation protocols have contributed to this success.

CONCLUSIONS

There is a well-documented long-term survivorship after THA. Future innovation in THA should address new challenges with younger and more demanding patients, rather than change current methods that have a proven good survivorship. This innovation depends mainly upon improvements in the bearing surfaces and advances in pain control and rehabilitation.