An In Vivo Prediction of Anisometry and Strain in Anterior Cruciate Ligament Reconstruction - A Combined Magnetic Resonance and Dual Fluoroscopic Imaging Analysis

Evaluating femoral graft placement using three-dimensional magnetic resonance imaging in the reconstruction of the anterior cruciate ligament via independent or transtibial drilling techniques: a retrospective cohort study

PURPOSE

Anterior cruciate ligament (ACL) reconstruction is a common surgical procedure, yet failure still largely occurs due to nonanatomically positioned grafts. The purpose of this study was to retrospectively evaluate patients with torn ACLs before and after reconstruction via 3D MRI and thereby assess the accuracy of graft position on the femoral condyle.

METHODS

Forty-one patients with unilateral ACL tears were recruited. Each patient underwent 3D MRI of both knees before and after surgery. The location of the reconstructed femoral footprint relative to the patient's native footprint was compared.

RESULTS

Native ACL anatomical location of the native ACL had a significant impact on graft position. Native ACLs that were previously more anterior yielded grafts that were more posterior (3.70 ± 1.22 mm, P = 0.00018), and native ACL that were previously more proximal yielded grafts that were more distal (3.25 ± 1.09 mm, P = 0.0042). Surgeons using an independent drilling method positioned 76.2% posteriorly relative to the native location, with a mean 0.1 ± 2.8 mm proximal (P = 0.8362) and 1.8 ± 3.0 mm posterior (P = 0.0165). Surgeons using a transtibial method positioned 75% proximal relative to the native location, with a mean 2.2 ± 3.0 mm proximal (P = 0.0042) and 0.2 ± 2.6 mm posterior (P = 0.8007). These two techniques showed a significant difference in magnitude in the distal-proximal axis (P = 0.0332).

CONCLUSION

The femoral footprint position differed between the native and reconstructed ACLs, suggesting that ACL reconstructions are not accurate. Rather, they are converging to a normative reference point that is neither anatomical nor isometric.

Effects of Weight-Bearing on Tibiofemoral, Patellofemoral, and Patellar Tendon Kinematics in Older Adults

Quantification of natural knee kinematics is essential for the assessment of joint function in the diagnosis of pathologies. Combined measurements of tibiofemoral and patellofemoral joint kinematics are necessary because knee pathologies, such as progression of osteoarthritis and patellar instability, are a frequent concern in both articulations. Combined measurement of tibiofemoral and patellofemoral kinematics also enables calculation of important quantities, specifically patellar tendon angle, which partly determines the loading vector at the tibiofemoral joint and patellar tendon moment arm. The goals of this research were to measure the differences in tibiofemoral and patellofemoral kinematics, patellar tendon angle (PTA), and patellar tendon moment arm (PTMA) that occur during non-weight-bearing and weight-bearing activities in older adults.

METHODS

High-speed stereo radiography was used to measure the kinematics of the tibiofemoral and patellofemoral joints in subjects as they performed seated, non-weight-bearing knee extension and two weight-bearing activities: lunge and chair rise. PTA and PTMA were extracted from the subject's patellofemoral and tibiofemoral kinematics. Kinematics and the root mean square difference (RMSD) between non-weight-bearing and weight-bearing activities were compared across subjects and activities.

RESULTS

Internal rotation increased with weight-bearing (mean RMSD from knee extension was 4.2 ± 2.4° for lunge and 3.6 ± 1.8° for chair rise), and anterior translation was also greater (mean RMSD from knee extension was 2.2 ± 1.2 mm for lunge and 2.3 ± 1.4 mm for chair rise). Patellar tilt and medial-lateral translation changed from non-weight-bearing to weight-bearing. Changes of the patellar tendon from non-weight-bearing to weight-bearing were significant only for PTMA.

CONCLUSIONS

While weight-bearing elicited changes in knee kinematics, in most degrees of freedoms, these differences were exceeded by intersubject differences. These results provide comparative kinematics for the evaluation of knee pathology and treatment in older adults.

Establishment of near and non isometric anterior cruciate ligament reconstruction with artificial ligament in a rabbit model

Background

Tunnel position deicide the isometry of graft attachment in synthetic anterior cruciate ligament (ACL) reconstruction. Near-isometric tunnel position may have advantage in graft integration and knee function in ACL reconstruction (ACLR) with polyethylene terephthalate (PET) ligament. Few studies focused on tunnel position isometry when conduct ACLR with an animal model. This study aimed to establish a preclinical rabbit model of near and non isometric ACLR with PET ligament and investigate the advantage of near-isometric ACLR compared to non-isometric ACLR.

Methods

Nine hind limbs of rabbit were used in tunnel position study. Two femoral(anatomic, nonanatomic) tunnels and three tibial(anterior, middle, posterior) tunnels were used to measure tunnel position isometry during knee full range of motion. The tunnel position combination with minimal isometry was considered as near-isometric tunnel position. Then, 48 rabbits divided into two groups were conducted near or non isometric ACLR with PET ligament with graft fixation angle of 30° and constant tension of 5N. PET ligament isometry, range of motion(ROM) restriction, knee laxity were recorded after operation and followed up with macroscopic observation, microcomputed tomography (micro-CT) analysis, histology assessment and biomechanical test at 4 and 8 weeks postoperatively.

Results

The tunnel combination with minimal isometry was femoral anatomic position and tibial posterior position(5.19 ​± ​1.78%) and considered as near-isometric tunnel position. ROM restriction were observed in non-isometric group (22.50 ​± ​14.14°) while none in near-isometric group. However, no ROM restriction observed at 8 weeks in both group. Knee laxity compared to contralateral knee were better in near-isometric group than non-isometric group (stable/slack/total 10/2/12 VS 3/9/12, p ​= ​0.012) at 8 weeks postoperatively. Supeiror PET ligament integration were also observed in near-isometric group through macroscopic observation, micro-CT analysis, histology assessment at both 4 and 8 weeks. The failure load in the Near-Isometric group at 8 weeks were higher than timezero reconstruction with statistical difference (156.8N ​± ​25.98N vs.102.6 ​± ​22.96N, p ​= ​0.02).

Conclusion

A rabbit model of ACLR based on tunnel position isometry was successfully established in this study. The near-isometric tunnel position in rabbit model was femoral anatomic position and tibial posterior position. A near-isometric ACLR with PET ligament did not cause ROM restriction and had a better graft integration and follow-up stability than non-isometric ACLR with ROM restriction.

The Translational Potential of this Article

The study demonstrate the establishmentof near-isometric tunnel position and non-isometric tunnel position with significant difference of ROM restriction and graft-bone integration. The described tunnel positions with differential isometry in a rabbit ACLR provides a reproducible and translational small animal model and enables preclinical research between tunnel position isometry and its affection on variable grafts, graft integration and knee function.

Anterior cruciate ligament bundle insertions vary between ACL-rupture and non-injured knees

PURPOSE

The present study aimed to investigate the three-dimensional topographic anatomy of the anterior cruciate ligament (ACL) bundle attachment in both ACL-rupture and ACL-intact patients who suffered a noncontact knee injury and identify potential differences.

METHODS

Magnetic resonance images of 90 ACL-rupture knees and 90 matched ACL-intact knees, who suffered a noncontact knee injury, were used to create 3D ACL insertion models.

RESULTS

In the ACL-rupture knees, the femoral origin of the anteromedial (AM) bundle was 24.5 ± 9.0% posterior and 45.5 ± 10.5% proximal to the flexion-extension axis (FEA), whereas the posterolateral (PL) bundle origin was 35.5 ± 12.5% posterior and 22.4 ± 10.3% distal to the FEA. In ACL-rupture knees, the tibial insertion of the AM-bundle was 34.3 ± 4.6% of the tibial plateau depth and 50.7 ± 3.5% of the tibial plateau width, whereas the PL-bundle insertion was 47.5 ± 4.1% of the tibial plateau depth and 56.9 ± 3.4% of the tibial plateau width. In ACL-intact knees, the origin of the AM-bundle was 17.5 ± 9.1% posterior (p < 0.01) and 42.3 ± 10.5% proximal (n.s.) to the FEA, whereas the PL-bundle origin was 32.1 ± 11.1% posterior (n.s.) and 16.3 ± 9.4% distal (p < 0.01) to the FEA. In ACL-intact knees, the insertion of the AM-bundle was 34.4 ± 6.6% of the tibial plateau depth (n.s.) and 48.1 ± 4.6% of the tibial plateau width (n.s.), whereas the PL-bundle insertion was 42.7 ± 5.4% of the tibial plateau depth (p < 0.01) and 57.1 ± 4.8% of the tibial plateau width (n.s.).

CONCLUSION

The current study revealed variations in the three-dimensional topographic anatomy of the native ACL between ACL-rupture and ACL-intact knees, which might help surgeons who perform anatomical double-bundle reconstruction surgery.

LEVEL OF EVIDENCE

III.

Dual fluoroscopic imaging and CT-based finite element modelling to estimate forces and stresses of grafts in anatomical single-bundle ACL reconstruction with different femoral tunnels

PURPOSE

Little is known about the in vivo forces and stresses on grafts used in anterior cruciate ligament (ACL) reconstruction. The aims of this study were to evaluate and compare the forces and stresses on grafts used in anatomical single-bundle ACL reconstruction at different locations of the femoral footprint (anterior vs middle vs posterior; high vs middle vs low) during a lunge motion.

METHODS

Establish subject-specific finite element models with different graft's tunnel loci to represent the primary ACL reconstructions. A displacement controlled finite element method was used to simulate lunge motions (full extension to ~ 100° of flexion) with six-degree-of-freedom knee kinematics data obtained from the validated dual fluoroscopic imaging techniques. The reaction force of the femur and maximal principal stresses of the grafts were subsequently calculated during knee flexion.

RESULTS

Increased and decreased graft forces were observed when the grafts were located higher and lower on the femoral footprint, respectively; anterior and posterior graft placement did not significantly affect the graft force. Lower and posterior graft placement resulted in less stress on the graft at higher degrees of flexion; there were no significant differences in stress when the grafts were placed from 0° to 30° of flexion on the femoral footprint.

CONCLUSION

The proposed method is able to simulate knee joint motion based on in vivo kinematics. The results demonstrate that posterior to the centre of the femoral footprint is the strategic location for graft placement, and this placement results in anatomical graft behaviour with a low stress state.

The Effect of Knee Flexion on Length Changes and Stress Distribution of Ligaments: A Displacement Controlled Finite Element Analysis

The use of dynamic finite element analysis to investigate the biomechanical behavior of the knee joint is mainly based on movement of the joint. Challenges are associated with simulation of knee joint flexion-extension activity. This study investigated changes in the length and stress state of ligaments during lunge with a displacement controlled finite element analysis of the knee joint based on in vivo fluoroscopic kinematic data. The geometric center axis (GCA) was used to represent knee kinematics to quantify femoral motion relative to the tibia. Because the GCA was considered as a functional flexion axis, 2 degrees of freedom could be reduced. Published data on the in vivo fluoroscopic kinematic features of the GCA were used to establish the equations for degrees of freedom. Data for 4 degrees of freedom were obtained simultaneously at every 5° of knee flexion. Displacement and rotation were applied to the femur and tibia to produce relative displacement, and the elongation and stress state of the knee ligaments were computed. The predictions confirmed that lunge affected the biomechanical behavior of ligaments. Displacement controlled finite element analysis of knee flexion can be simulated on the basis of fluoroscopic kinematic data to achieve physiologic movement. [Orthopedics. 2021;44(1):e61-e67.].

The effect of ACL deficiency on the end-to-end distances of the tibiofemoral ACL attachment during in vivo dynamic activity

PURPOSE

To evaluate the effect of ACL deficiency on the in vivo changes in end-to-end distances and to determine appropriate graft fixation angles for commonly used tunnel positions in contemporary ACL reconstruction techniques.

METHODS

Twenty-one patients with unilateral ACL-deficient and intact contralateral knees were included. Each knee was studied using a combined magnetic resonance and dual fluoroscopic imaging technique while the patients performed a dynamic step-up motion (~50° of flexion to extension). The end-to-end distances of the centers of the anatomic anteromedial (AM), posterolateral (PL) and single-bundle ACL reconstruction (SB-anatomic) tunnel positions were simulated and analyzed. Comparisons were made between the elongation patterns between the intact and ACL-deficient knees. Additionally, a maximum graft length change of 6% was used to calculate the deepest flexion fixation angle.

RESULTS

ACL-deficient knees had significantly longer graft lengths when compared with the intact knees for all studied tunnel positions (p < 0.01). The end-to-end distances for the AM, PL and SB-anatomic grafts were significantly longer between 0-30° of flexion when compared with the intact knee by p < 0.05 for all. Six percent length change occurred with fixation of the AM bundle at 30° of flexion, PL bundle at 10° and the SB-anatomic graft at 20°.

CONCLUSIONS

ACL-deficient knees had significantly longer in vivo end-to-end distances between 0°-30° of flexion for grafts at the AM, PL and SB-anatomic tunnel positions when compared with the intact knees. Graft fixation angles of <30° for the AM, <10° for the PL, and <20° for the SB-anatomic grafts may prevent permanent graft stretch.

Editorial Commentary: Using Computer Simulations to Predict Functional Outcome After Surgery

Computer simulations of surgical procedures can be used to predict functional outcome after surgery. To impact clinical decision making, the simulations must be an accurate representation of the in vivo condition.