A new agent for derivatizing carbonyl species used to investigate limonene ozonolysis

Analytical methodologies for oxidized organic compounds in the atmosphere

Oxidized compounds in the atmosphere can occur as emitted primary compounds or as secondary products when volatile emitted precursors react with various oxidants. Due to the presence of polar functional groups, their vapor pressures decrease, and they condense onto small particles. Thereby, they have an effect on climate change by the formation of clouds and scattering solar radiation. The particles and oxidized compounds themselves can cause serious health problems when inhaled. Therefore, it is of utmost importance to study oxidized compounds in the atmosphere. Much ongoing research is focused on the discovery of new oxidized substances and on the evaluation of their sources and factors influencing their formation. Monitoring biogenic and anthropogenic primary oxidized compounds or secondary oxidized products in chamber experiments or field campaigns is common. New discoveries have been reported, including various oxidized compounds and a new group of compounds called highly oxidized organic molecules (HOMs). Analytics of HOMs are mainly focused on chromatography and high-resolution mass spectrometry employing chemical ionization for identifying and quantifying compounds at low concentrations. Oxidized compounds can also be monitored by spectrophotometric methods in which the determinations of total amounts are based on functional groups. This review highlights recent findings on oxidized organic compounds in the atmosphere and analytical methodologies used for their detection and quantification. The discussion includes gas and liquid chromatographic methods, sampling, extraction, concentration, and derivatization procedures involved, as well as mass spectrometric and spectrophotometric methods.

The oxidation mechanism of gas-phase ozonolysis of limonene in the atmosphere

Limonene with endo- and exo-double bonds is a significant monoterpene in the atmosphere and has high reactivity towards O3. We investigated the atmospheric oxidation mechanism of limonene ozonolysis using a high level quantum chemistry calculation coupled with RRKM-ME kinetic simulation. The additions of O3 can take place at both the endo- and exo-double bonds with a branching ratio of 0.87 : 0.13, forming four major highly energized CIs* (named Syn-2a*, Syn-2b*, Anti-2b* and Anti-2c*) with the relative higher fractions of 0.21 : 0.35 : 0.27 : 0.11. A yield of 4% for Limona-ketone was obtained as well. For the unimolecular isomerization pathways of limonene + O3 → POZs → CIs* → SOZ, VHP, or dioxirane, five, one, or none of the internal rotations are treated as hindered internal rotors for CIs*. We obtained percentages of 0.59 : 0.18 : 0.14 in total for separate isomerization routes in the formation of VHPs, dioxirane and SOZs from CIs* using the fourth-order Runge-Kutta method. Additionally, a yield of ∼5% was acquired for stabilized CIs compiling the fractions of different addition routes. About ∼10% of stabilized Anti-2b would isomerize to VHP and 90% would isomerize to SOZs. Isomerization to VHPs dominates the fate of stabilized Syn-2a, Syn-2b and Anti-2c. The overall yield of OH radicals was 0.61. Our study suggested a yield of 0.17 for stabilized SOZs and 0.18 for dioxirane, although both their fates are ambiguous.

Particle and vapor emissions from vat polymerization desktop-scale 3-dimensional printers

Little is known about emissions and exposure potential from vat polymerization additive manufacturing, a process that uses light-activated polymerization of a resin to build an object. Five vat polymerization printers (three stereolithography (SLA) and two digital light processing (DLP) were evaluated individually in a 12.85 m3 chamber. Aerosols (number, size) and total volatile organic compounds (TVOC) were measured using real-time monitors. Carbonyl vapors and particulate matter were collected for offline analysis using impingers and filters, respectively. During printing, particle emission yields (#/g printed) ranged from 1.3 ± 0.3 to 2.8 ± 2.6 x 108 (SLA printers) and from 3.3 ± 1.5 to 9.2 ± 3.0 x 108 (DLP printers). Yields for number of particles with sizes 5.6 to 560 nm (#/g printed) were 0.8 ± 0.1 to 2.1 ± 0.9 x 1010 and from 1.1 ± 0.3 to 4.0 ± 1.2 x 1010 for SLA and DLP printers, respectively. TVOC yield values (µg/g printed) ranged from 161 ± 47 to 322 ± 229 (SLA printers) and from 1281 ± 313 to 1931 ± 234 (DLP printers). Geometric mean mobility particle sizes were 41.1-45.1 nm for SLA printers and 15.3-28.8 nm for DLP printers. Mean particle and TVOC yields were statistically significantly higher and mean particle sizes were significantly smaller for DLP printers compared with SLA printers (p < 0.05). Energy dispersive X-ray analysis of individual particles qualitatively identified potential occupational carcinogens (chromium, nickel) as well as reactive metals implicated in generation of reactive oxygen species (iron, zinc). Lung deposition modeling indicates that about 15-37% of emitted particles would deposit in the pulmonary region (alveoli). Benzaldehyde (1.0-2.3 ppb) and acetone (0.7-18.0 ppb) were quantified in emissions from four of the printers and 4-oxopentanal (0.07 ppb) was detectable in the emissions from one printer. Vat polymerization printers emitted nanoscale particles that contained potential carcinogens, sensitizers, and reactive metals as well as carbonyl compound vapors. Differences in emissions between SLA and DLP printers indicate that the underlying technology is an important factor when considering exposure reduction strategies such as engineering controls.

VOCs Measurements in Residential Buildings: Quantification via Thermal Desorption and Assessment of Indoor Concentrations in a Case-Study

Volatile organic compounds (VOCs) represent one of the most important categories of pollutants, influencing the air quality and human health and well-being in indoor environments. In the present study, 12 selected VOCs were sampled using Tenax TA tubes and analyzed by thermal desorption combined with gas chromatography and a flame ionization detector (TD-GC-FID). The TD-GC-FID method was optimized to obtain the separation of all the analytical peaks (including m- and p-xylene) and a satisfactory sensitivity, with low detection (between 0.14 and 0.31 ng) and quantification (between 0.47 and 1.02 ng) limits. The whole procedure was firstly assessed with the analysis of four co-located tubes exposed at an outdoor monitoring site, with results that revealed a very low inter-tubes variability (relative standard deviations of parallel measurements <5%). Then, the measurement protocol was used to quantify the indoor concentrations of the target VOCs in nine different homes during the dishwasher washing cycle. The most abundant detected VOC in all dwellings was d-limonene (mean: 231 µg/m3; maximum: 611 µg/m3). All the other compounds were monitored at concentration levels one or two orders of magnitude lower than d-limonene, and were generally comparable with those found in the scientific literature. In terms of health concerns, the measured concentrations were always well below the safe levels established for the protection of the general population in living environments.

Reactive indoor air chemistry and health-A workshop summary

The chemical composition of indoor air changes due to the reactive nature of the indoor environment. Historically, only the stable parent compounds were investigated due to their ease of measurement by conventional methods. Today, however, scientists can better characterize oxidation products (gas and particulate-phase) formed by indoor chemistry. An understanding of occupant exposure can be developed through the investigation of indoor oxidants, the use of derivatization techniques, atmospheric pressure detection, the development of real-time technologies, and improved complex modeling techniques. Moreover, the connection between exposure and health effects is now receiving more attention from the research community. Nevertheless, a need still exists for improved understanding of the possible link between indoor air chemistry and observed acute or chronic health effects and long-term effects such as work-related asthma.

Identification and quantification of carbonyl-containing α-pinene ozonolysis products using O-tert-butylhydroxylamine hydrochloride

The yields of carbonyl-containing reaction products from the ozonolysis of α-pinene have been investigated using concentrations of ozone found in the indoor environment ([O₃] ≤ 100 ppb). An impinger was used to collect gas-phase oxidation products in water, where the derivatization agent O-tert-butylhydroxylamine hydrochloride (TBOX) and gas chromatography-mass spectrometry were used to identify carbonyl-containing species. Seven carbonyl-containing products were observed. The yield of the primary product, pinonaldehyde was measured to be 76 %. Using cyclohexane as a hydroxyl radical (OH) scavenger, the yield of pinonaldehyde decreased to 46 %, indicating the influence secondary OH radicals have on α-pinene ozonolysis products. Furthermore, the use of TBOX, a small molecular weight derivatization agent, allowed for the acquisition of the first mass spectral data of oxopinonaldehyde, a tricarbonyl reaction product of α-pinene ozonolysis. The techniques described herein allow for an effective method for the collection and identification of terpene oxidation products in the indoor environment.

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer

Printing devices are known to emit chemicals into the indoor atmosphere. Understanding factors that influence release of chemical contaminants from printers is necessary to develop effective exposure assessment and control strategies. In this study, a desktop fused deposition modeling (FDM) 3-dimensional (3-D) printer using acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA) filaments and two monochrome laser printers were evaluated in a 0.5 m3 chamber. During printing, chamber air was monitored for vapors using a real-time photoionization detector (results expressed as isobutylene equivalents) to measure total volatile organic compound (TVOC) concentrations, evacuated canisters to identify specific VOCs by off-line gas chromatography-mass spectrometry (GC-MS) analysis, and liquid bubblers to identify carbonyl compounds by GC-MS. Airborne particles were collected on filters for off-line analysis using scanning electron microscopy with an energy dispersive x-ray detector to identify elemental constituents. For 3-D printing, TVOC emission rates were influenced by a printer malfunction, filament type, and to a lesser extent, by filament color; however, rates were not influenced by the number of printer nozzles used or the manufacturer's provided cover. TVOC emission rates were significantly lower for the 3-D printer (49-3552 µg h-1) compared to the laser printers (5782-7735 µg h-1). A total of 14 VOCs were identified during 3-D printing that were not present during laser printing. 3-D printed objects continued to off-gas styrene, indicating potential for continued exposure after the print job is completed. Carbonyl reaction products were likely formed from emissions of the 3-D printer, including 4-oxopentanal. Ultrafine particles generated by the 3-D printer using ABS and a laser printer contained chromium. Consideration of the factors that influenced the release of chemical contaminants (including known and suspected asthmagens such as styrene and 4-oxopentanal) from a FDM 3-D printer should be made when designing exposure assessment and control strategies.

Unexpectedly high concentrations of monoterpenes in a study of UK homes

The abundance of volatile organic compounds (VOCs) found in homes depends on many factors such as emissions, ventilation and the oxidative environment and these are evolving over time, reflecting changes in chemical use, behaviour and building design/materials. The concentrations of VOCs in 25 UK homes of varying ages, design and occupancy were quantified using continuous indoor air sampling over five days. Air was collected through low flow (1 mL min^-1) constant flow restrictors into evacuated 6 L internally silica-treated canisters until the canisters reached atmospheric pressure. This was followed by thermal desorption-gas chromatography and high mass accuracy time-of-flight mass spectrometry (TD-GC-TOF/MS). A fully quantitative analysis was performed on the eight most abundant hydrocarbon-based VOCs found. Despite differences in building characteristics and occupant numbers 94% of the homes had d-limonene or α-pinene as the most abundant VOCs. The variability seen across the 25 homes in concentrations of monoterpenes indoors was considerably greater than that of species such as isoprene, benzene, toluene and xylenes. The variance in VOCs indoors appeared to be strongly influenced by occupant activities such as cleaning with 5-day average concentrations of d-limonene ranging from 18 μg m^-3 to over 1400 μg m^-3, a peak domestic value that is possibly the highest yet reported in the literature.

Photomineralization of aqueous salicylic acids. Photoproducts characterization and formation of light induced secondary OH precursors (LIS-OH)

The photolysis of aqueous 5-chlorosalicylic acid (ClSA) and dihydroxybenzoic acid (DHBA), its main photoproduct, was studied to determine the extent of degradation caused by simulated solar light. Photoproducts identification was achieved using high resolution LC-MS and GC-MS. About 40 photoproducts from C₁₉ to C₁ were characterized, including a dihydroxycyclopentadienic acid, a ring contraction photoproduct, and numerous carbonyls and carboxylic acid derivatives that were detected thanks to derivatization. UV-visible spectral monitoring of the reactions revealed that ClSA and DHBA underwent photobleaching after developing a temporarily featureless absorbance between 300 and 500 nm. Measurement of OH radicals using terephtalic acid as a probe showed that OH radicals were generated with an average rate of 7 × 10^-9 M s^-1 and a total cumulated concentration of 10^-3 M, corresponding to ∼ 5-fold the initial concentration of DHBA. Furthermore, TOC analysis indicated that significant mineralization (51-90%) occurred. These findings are consistent with the formation of light induced secondary OH (LIS-OH) precursors such as featureless long wavelength absorbing compounds as well as non-absorbing hydroperoxides. The formation of LIS-OH illustrated here may also take place in the aqueous photodegradation of other substituted phenols likely present in dissolved organic matter and humic substructures, it deserves to be studied in more details.

Limonene ozonolysis in the presence of nitric oxide: Gas-phase reaction products and yields

The reaction products from limonene ozonolysis were investigated using the new carbonyl derivatization agent, O-tert-butylhydroxylamine hydrochloride (TBOX). With ozone (O3) as the limiting reagent, five carbonyl compounds were detected. The yields of the carbonyl compounds are discussed with and without the presence of a hydroxyl radical (OH•) scavenger, giving insight into the influence secondary OH radicals have on limonene ozonolysis products. The observed reaction product yields for limonaketone (LimaKet), 7-hydroxyl-6-oxo-3-(prop-1-en-2-yl)heptanal (7H6O), and 2-acetyl-5-oxohexanal (2A5O) were unchanged suggesting OH• generated by the limonene + O3 reaction does not contribute to their formation. The molar yields of 3-isopropenyl-6-oxo-heptanal (IPOH) and 3-acetyl-6-oxoheptanal (3A6O) decreased by 68% and >95%; respectively, when OH• was removed. This suggests that OH• radicals significantly impact the formation of these products. Nitric oxide (NO) did not significantly affect the molar yields of limonaketone or IPOH. However, NO (20 ppb) considerably decreased the molar reaction product yields of 7H6O (62%), 2A5O (63%), and 3A6O (47%), suggesting NO reacted with peroxyl intermediates, generated during limonene ozonolysis, to form other carbonyls (not detected) or organic nitrates. These studies give insight into the transformation of limonene and its reaction products that can lead to indoor exposures.

Gas-phase reaction products and yields of terpinolene with ozone and nitric oxide using a new derivatization agent

The new derivatization agent, O-tert-butylhydroxylamine hydrochloride (TBOX) was used to investigate the carbonyl reaction products from terpinolene ozonolysis. With ozone (O₃) as the limiting reagent, four carbonyl compounds were detected: methylglyoxal (MG), 4-methylcyclohex-3-en-1-one, (4MCH), 6-oxo-3-(propan-2-ylidene) heptanal (6OPH), and 3,6-dioxoheptanal (36DOH). The tricarbonyl 36DOH has not been previously observed. Using cyclohexane as a hydroxyl radical (OH•) scavenger, the yields of 6OPH and 36DOH were reduced indicating the influence secondary OH• radicals have on terpinolene ozonolysis products. However, the MG yield increased and the 4MCH yield was unchanged when OH•radicals were scavenged suggesting they are only made by the terpinolene + O₃ reaction. The detection of 36DOH using TBOX highlights the advantages of a smaller molecular weight derivatization agent for the detection of multi-carbonyl compounds. The product yields from terpinolene ozonolysis experiments conducted in the presence of 20 ppb nitric oxide (NO) remained unchanged except for MG which decreased. However, in experiments where O₃ was kept constant at 50 ppb and NO was varied (20, 50, 100 ppb) MG, 6OPH, 36DOH decreased with increasing NO while 4MCH increased with increasing NO. The use of TBOX derivatization if combined with other derivatization agents may address a recurring need to simply and accurately detect multi-functional oxygenated species in air.

Crucial Role for Outdoor Chemistry in Ultrafine Particle Formation in Modern Office Buildings

In the developed world, we spend most of our time indoors, where we receive the majority of our exposure to air pollution. This paper reports model simulations of PM2.5 and ozone concentrations in identical landscape offices in three European cities: Athens, Helsinki, and Milan. We compare concentrations during an intense heatwave in August 2003 with a meteorologically more typical August in 2009. During the heatwave, average indoor ozone concentrations during office hours were 44, 19, and 41 ppb in Athens, Helsinki, and Milan respectively, enhanced by 7, 4, and 17 ppb respectively relative to 2009. Total predicted PM2.5 concentrations were 13.5, 3.6, and 17.2 μg m(-3) in Athens, Helsinki, and Milan respectively, enhanced by 0.5, 0.4, and 6.7 μg m(-3) respectively relative to 2009: the three cities were affected to differing extents by the heatwave. A significant portion of the indoor PM2.5 derived from gas-phase chemistry outdoors, producing 2.5, 0.8, and 4.8 μg m(-3) of the total concentrations in Athens, Helsinki, and Milan, respectively. Despite filtering office inlet supplies to remove outdoor particles, gas-phase precursors for particles can still enter offices, where conditions are ripe for new particles to form, particularly where biogenic emissions are important outdoors. This result has important implications for indoor air quality, particularly given the current trend for green walls on buildings, which will provide a potential source of biogenic emissions near to air inlet systems.