Multi-block poloxamer surfactants suppress aggregation of denatured proteins

Cardioprotection by Poloxamer 188 is Mediated through Increased Endothelial Nitric Oxide Production

Ischemia/reperfusion (I/R) injury significantly contributes to the morbidity and mortality associated with cardiac events. Poloxamer 188 (P188), a nonionic triblock copolymer, has been proposed to mitigate I/R injury by stabilizing cell membranes. However, the underlying mechanisms remain incompletely understood, particularly concerning endothelial cell function and nitric oxide (NO) production. We employed human induced pluripotent stem cell (iPSC)-derived cardiomyocytes (CMs) and endothelial cells (ECs) to elucidate the effects of P188 on cellular survival, function, and NO secretion under simulated I/R conditions. iPSC-CMs contractility and iPSC-ECs' NO production were assessed following exposure to P188. Further, an isolated heart model using Brown Norway rats subjected to I/R injury was utilized to evaluate the ex-vivo cardioprotective effects of P188, examining cardiac function and NO production, with and without the administration of a NO inhibitor. In iPSC-derived models, P188 significantly preserved CM contractile function and enhanced cell viability after hypoxia/reoxygenation. Remarkably, P188 treatment led to a pronounced increase in NO secretion in iPSC-ECs, a novel finding demonstrating endothelial protective effects beyond membrane stabilization. In the rat isolated heart model, administration of P188 during reperfusion notably improved cardiac function and reduced I/R injury markers. This cardioprotective effect was abrogated by NO inhibition, underscoring the pivotal role of NO. Additionally, a dose-dependent increase in NO production was observed in non-ischemic rat hearts treated with P188, further establishing the critical function of NO in P188 induced cardioprotection. In conclusion, our comprehensive study unveils a novel role of NO in mediating the protective effects of P188 against I/R injury. This mechanism is evident in both cellular models and intact rat hearts, highlighting the potential of P188 as a therapeutic agent against I/R injury. Our findings pave the way for further investigation into P188's therapeutic mechanisms and its potential application in clinical settings to mitigate I/R-related cardiac dysfunction.

Efflux Pump-Binding 4(3-Aminocyclobutyl)Pyrimidin-2-Amines Are Colloidal Aggregators

Efflux pumps are a relevant factor in antimicrobial resistance. In E. coli, the tripartite efflux pump AcrAB-TolC removes a chemically diverse set of antibiotics from the bacterium. Therefore, small molecules interfering with efflux pump function are considered adjuvants for improving antimicrobial therapies. Several compounds targeting the periplasmic adapter protein AcrA and the efflux pump AcrB have been identified to act synergistically with different antibiotics. Among those, several 4(3-aminocyclobutyl)pyrimidin-2-amines have been shown to bind to both proteins. In this study, we intended to identify analogs of these substances with improved binding affinity to AcrA using virtual screening followed by experimental validation. While we succeeded in identifying several compounds showing a synergistic effect with erythromycin on E. coli, biophysical studies suggested that 4(3-aminocyclobutyl)pyrimidin-2-amines form colloidal aggregates that do not bind specifically to AcrA. Therefore, these substances are not suited for further development. Our study emphasizes the importance of implementing additional control experiments to identify aggregators among bioactive compounds.

Engineering the Structure and Rheological Properties of P407 Hydrogels via Reverse Poloxamer Addition

Aqueous solutions of poloxamer 407 (P407), a commercially available and nontoxic ABA triblock polymer (PEO-PPO-PEO), undergo a solution-to-gel transition with increasing temperature and are promising candidates for injectable therapeutics. The gel transition temperature, modulus, and structure are all dictated by polymer concentration, preventing independent tuning of these properties. Here, we show that addition of BAB reverse poloxamers (RPs) to P407-based solutions dramatically alters the gelation temperature, modulus, and morphology. Gelation temperature and RP localization within the hydrogel are dictated by RP solubility. Highly soluble RPs increase gelation temperature and incorporate primarily into the micelle corona regions. Alternatively, RPs with low aqueous solubility decrease gelation temperature and associate within the micelle core and core-corona interface. These differences in RP localization have significant implications for the hydrogel modulus and microstructure. The ability to tune gelation temperature, modulus, and structure through RP addition allows for the design of thermoresponsive materials with specific properties that are unobtainable with neat P407-based hydrogels.

Effect of Contact Lens Solutions in Stabilizing the Activity of Tear Lysozyme

Purpose

Interactions between tear proteins and the interfaces of contact lenses can be complex and can influence contact lens wear success. Tear proteins, including lysozyme, function to maintain the balance of ocular surface homeostasis, as evidenced by the effects of its conformation relative to stabilizing the tear film and its potential impact on corneal epithelial cells. Contact lens manufacturers include components in lens care and blister package solutions to help stabilize the tear film and preserve homeostasis. This in vitro study was performed to evaluate the ability of daily disposable contact lens package solutions to stabilize lysozyme and preserve its native conformation under denaturing conditions.

Methods

Lysozyme was added to contact lens solutions sampled from kalifilcon A, etafilcon A, senofilcon A, narafilcon A, nelfilcon A, verofilcon A, delefilcon A, somofilcon A, and stenfilcon A blister packages, then mixed with the protein denaturant sodium lauryl sulfate. Lysozyme activity was evaluated by adding test solutions to a suspension of Micrococcus luteus. Native lysozyme lyses the Micrococcus luteus cell wall, which decreases suspension turbidity. Stabilization of lysozyme activity was determined by comparing suspension turbidity before and after exposure to test solutions.

Results

Lysozyme stabilization was 90.7% for kalifilcon A solution, a statistically significant improvement (p < 0.05) compared to phosphate buffered saline (PBS, negative control). No significant improvement was observed with any other contact lens solution (all lysozyme stabilization < 5.00%).

Conclusion

The representative tear protein lysozyme was significantly more stable in the novel kalifilcon A contact lens solution containing multiple moisturizers and osmoprotectants than in PBS or other daily disposable contact lens solutions. The lysozyme activity assay provides mechanistic evidence that the kalifilcon A contact lens solution can stabilize proteins under conditions that typically denature proteins, which may contribute to maintaining ocular surface homeostasis.

End-to-End Approach to Surfactant Selection, Risk Mitigation, and Control Strategies for Protein-Based Therapeutics

A survey performed by the AAPS Drug Product Handling community revealed a general, mostly consensus, approach to the strategy for the selection of surfactant type and level for biopharmaceutical products. Discussing and building on the survey results, this article describes the common approach for surfactant selection and control strategy for protein-based therapeutics and focuses on key studies, common issues, mitigations, and rationale. Where relevant, each section is prefaced by survey responses from the 22 anonymized respondents. The article format consists of an overview of surfactant stabilization, followed by a strategy for the selection of surfactant level, and then discussions regarding risk identification, mitigation, and control strategy. Since surfactants that are commonly used in biologic formulations are known to undergo various forms of degradation, an effective control strategy for the chosen surfactant focuses on understanding and controlling the design space of the surfactant material attributes to ensure that the desired material quality is used consistently in DS/DP manufacturing. The material attributes of a surfactant added in the final DP formulation can influence DP performance (e.g., protein stability). Mitigation strategies are described that encompass risks from host cell proteins (HCP), DS/DP manufacturing processes, long-term storage, as well as during in-use conditions.

Refolding in the modern biopharmaceutical industry

Inclusion bodies (IBs) often emerge upon overexpression of recombinant proteins in E. coli. From IBs, refolding is necessary to generate the native protein that can be further purified to obtain pure and active biologicals. This work focusses on refolding as a significant process step during biopharmaceutical manufacturing with an industrial perspective. A theoretical and historical background on protein refolding gives the reader a starting point for further insights into industrial process development. Quality requirements on IBs as starting material for refolding are discussed and further economic and ecological aspects are considered with regards to buffer systems and refolding conditions. A process development roadmap shows the development of a refolding process starting from first exploratory screening rounds to scale-up and implementation in manufacturing plant. Different aspects, with a direct influence on yield, such as the selection of chemicals including pH, ionic strength, additives, etc., and other often neglected aspects, important during scale-up, such as mixing, and gas-fluid interaction, are highlighted with the use of a quality by design (QbD) approach. The benefits of simulation sciences (process simulation and computer fluid dynamics) and process analytical technology (PAT) for seamless process development are emphasized. The work concludes with an outlook on future applications of refolding and highlights open research inquiries.

Peroxidation of tetronic 1107 reduces protein chaperone effect

To enhance the stability of protein therapeutics, pharmaceutical companies have long used various copolymer surfactants as excipients. They act to stabilize proteins by adhering to the hydrophobic surface of the protein preventing denaturation and aggregation. However, some commonly used excipients possess polyoxyalkylene chains that are susceptible to oxidative degradation while in aqueous solution. We postulate that oxidation reactions involving the hydrophobic domains reduce the surfactant's ability to stabilize the native protein structure. We investigated the effect of UV (λ=254 nm) radiated Poloxamine T1107 (T1107) on its ability to disaggregate DTT denatured hen egg-white lysozyme (HEWL). Peroxidation of UV irradiated T1107 was analyzed using FTIR spectroscopy, the Fe+2 to Fe+3 ion reduction assay method, and 1H NMR. Our results indicate that increased UV irradiation led to structural changes in T1107, specifically the addition of a carbonyl on the formate group. The structural change decreased T1107's ability to disaggregate HEWL. These results indicate that peroxide content is an important parameter to control in polyoxyalkylene-based excipients.

Small-volume extensional rheology of concentrated protein and protein-excipient solutions

Limited studies measure extensional rheology in protein solutions due to volume constraints and measurement challenges. We developed a small-volume, dripping-onto-substrate (DoS) extensional rheology device to measure the capillary thinning of protein and protein-excipient solutions via DoS for the first time. Ovalbumin (OVA) was used as a model system, examined via DoS both with and without excipient poloxamer 188 (P188). Water and dilute OVA break apart rapidly and demonstrate inertiocapillary (IC) thinning behavior, where longer breakup times in OVA can be attributed to lower surface tension. Further increasing OVA content leads to longer breakup times and deviations from IC thinning at the start of thinning, however, no evidence of elastic behavior is observed. P188 more effectively lowers the droplet surface tension than OVA, transitioning from IC behavior in dilute solution to weakly elastic behavior at higher concentrations. Combined protein/excipient formulations act synergistically at low concentrations, where breakup times are identical to those of the individual components despite the higher total concentration. However concentrated protein/excipient formulations exhibit elasticity, where extensional rheology parameters depend on P188 content and total concentration. These findings imply that excipients intended to stabilize proteins in shear flow can cause undesirable behavior in extensional flows like injection.

Membrane-associated mucins of the human ocular surface in health and disease

Mucins are a family of high molecular weight, heavily-glycosylated proteins produced by wet epithelial tissues, including the ocular surface epithelia. Densely-packed O-linked glycan chains added post-translationally confer the biophysical properties of hydration, lubrication, anti-adhesion and repulsion. Membrane-associated mucins (MAMs) are the distinguishing components of the mucosal glycocalyx. At the ocular surface, MAMs maintain wetness, lubricate the blink, stabilize the tear film, and create a physical barrier to the outside world. In addition, it is increasingly appreciated that MAMs function as cell surface receptors that transduce information from the outside to the inside of the cell. Recently, our team published a comprehensive review/perspectives article for molecular scientists on ocular surface MAMs, including previously unpublished data and analyses on two new genes MUC21 and MUC22, as well as new MAM functions and biological roles, comparing human and mouse (PMID: 31493487). The current article is a refocus for the audience of The Ocular Surface. First, we update the gene and protein information in a more concise form, and include a new section on glycosylation. Next, we discuss biological roles, with some new sections and further updating from our previous review. Finally, we provide a new chapter on MAM involvement in ocular surface disease. We end this with discussion of an emerging mechanism responsible for damage to the epithelia and their mucosal glycocalyces: the unfolded protein response (UPR). The UPR offers a novel target for therapeutic intervention.

Extrapulmonary Surfactant Therapy: Review of Available Data and Research/Development Issues

Since the discovery of surfactant, a large amount of knowledge has been accumulated about its biology and pharmacology. Surfactant is the cornerstone of neonatal respiratory critical care, but its proteins and phospholipids are produced in various tissues and organs, with possible roles only partially similar to that played in the alveoli. As surfactant research is focused mainly on its respiratory applications, knowledge about the possible role of surfactant in extrapulmonary disorders has never been summarized. Here we aim to comprehensively review the data about surfactant biology and pharmacology in organs other than the lung, especially focusing in the more promising surfactant extrapulmonary roles. We also review any preclinical or clinical data available about the therapeutic use of surfactant in these contexts. We offer a summary of knowledge and research/development milestones, as possible useful guidance for researchers of multidisciplinary background.

Efavirenz nanomicelles loaded vaginal film (EZ film) for preexposure prophylaxis (PrEP) of HIV

Preexposure prophylaxis (PrEP) using oral or vaginal microbicide is an emerging and effective strategy to prevent HIV transmission. Vaginal film is becoming more acceptable and a convenient dosage form compared to cream, gel and suppository. Extremely poor aqueous solubility of efavirenz (EFV) limits its use as vaginal microbicide. The aim of this study was to develop and evaluate a monomeric surfactant free, rapidly soluble vaginal film of EFV (EZ film). EZ film was prepared using a tetrafunctional block polymer (Tetronic 1107), carrageenan and polyvinyl alcohol (PVA) by solvent evaporation method. First, different solubilizers were screened for EFV solubility, in vitro cytotoxicity and cell membrane integrity assay on HeLa cells. Optimized film was characterized for solid state, mechanical strength, epithelial integrity, in vitro drug release in simulated vaginal fluid (SVF), simulated seminal fluid (SSF) and in vitro anti-HIV activity. Optimized EZ film showed a particle size of 48 ± 3.8 nm with PDI of 0.299. Differential scanning colorimetry (DSC) thermogram suggested the complete amorphization of EFV within the film. EZ film rapidly disintegrated (30 s) with complete release of EFV in SVF and SSF. The film was found to be non-toxic to HeLa cells and showed similar anti-HIV-1 activity as that of EFV in DMSO. EZ film did not show any significant change in the TEER value in HEC 1A cell line. Hence, the findings from the current study strongly suggest that the EZ film could be a cost-effective and convenient dosage form for PrEP of HIV.

Modulation of protein release from penta-block copolymer microspheres

Releasing a protein according to a zero-order profile without protein denaturation during the polymeric microparticle degradation process is very challenging. The aim of the current study was to develop protein-loaded microspheres with new PLGA based penta-block copolymers for a linear sustained protein release. Lysozyme was chosen as model protein and 40 µm microspheres were prepared using the solid-in-oil-in-water solvent extraction/evaporation process. Two types of PLGA-P188-PLGA penta-block copolymers were synthetized with two PLGA-segments molecular weight (20 kDa or 40 kDa). The resulting microspheres (50P20-MS and 50P40-MS) had the same size, an encapsulation efficiency around 50-60% but different porosities. Their protein release profiles were complementary: linear but non complete for 50P40-MS, non linear but complete for 50P20-MS. Two strategies, polymer blending and microsphere mixing, were considered to match the release to the desired profile. The (1:1) microsphere mixture was successful. It induced a bi-phasic release with a moderate initial burst (around 13%) followed by a nearly complete linear release for 8 weeks. This study highlighted the potential of this penta-block polymer where the PEO block mass ratio influence clearly the Tg and consequently the microsphere structure and the release behavior at 37 °C. The (1:1) mixture was a starting point but could be finely tuned to control the protein release.

Cell salvage in acute and chronic wounds: a potential treatment strategy. Experimental data and early clinical results

On 9 May 2018, the authors took part in a closed panel discussion on the impact of cell salvage in acute and chronic wounds. The goal was to deliberate the possible use of plurogel micelle matrix (PMM) as a new treatment strategy for wound healing and the authors openly shared their experiences, thoughts, experimental data and early clinical results. The outcome of the panel discussion has been abridged in this paper. The cell membrane consists of a lipid bilayer, which provides a diffusion barrier separating the inside of a cell from its environment. Cell membrane injury can result in acute cellular necrosis when defects are too large and cannot be resealed. There is a potential hazard to the body when these dying cells release endogenous alarm signals referred to as 'damage (or danger) associated molecular patterns' (DAMPs), which trigger the innate immune system and modulate inflammation. Cell salvage by membrane resealing is a promising target to ensure the survival of the individual cell and prevention of further tissue degeneration by inflammatory processes. Non-ionic surfactants such as poloxamers, poloxamines and PMM have the potential to resuscitate cells by inserting themselves into damaged membranes and stabilising the unstable portions of the lipid bilayers. The amphiphilic properties of these molecules are amenable to insertion into cell wall defects and so can play a crucial, reparative role. This new approach to cell rescue or salvage has gained increasing interest as several clinical conditions have been linked to cell membrane injury via oxidative stress-mediated lipid peroxidation or thermal disruption. The repair of the cell membrane is an important step in salvaging cells from necrosis to prevent further tissue degeneration by inflammatory processes. This is applicable to acute burns and chronic wounds such as diabetic foot ulcers (DFUs), chronic venous leg ulcers (VLUs), and pressure ulcers (PUs). Experimental data shows that PMM is biocompatible and able to insert itself into damaged membranes, salvaging their barrier function and aiding cell survival. Moreover, the six case studies presented in this paper reveal the potential of this treatment strategy.

Detection of Clinical Mesenchymal Cancer Cells from Bladder Wash Urine for Real-Time Detection and Prognosis

Bladder cancer (BC) is a disease that requires lifelong surveillance due to its high recurrence rate. An efficient method for the non-invasive rapid monitoring of patient prognosis and downstream phenotype characterization is warranted. Here, we develop an integrated procedure to detect aggressive mesenchymal exfoliated bladder cancer cells (EBCCs) from patients in a label-free manner. Using a combination of filtration and inertial focusing principles, the procedure allowed the focusing of EBCCs in a single stream-line for high-throughput separation from other urine components such as large squamous cells and blood cells using a microfluidic sorting device. Characterization of enriched cells can be completed within hours, suggesting a potential utility for real-time detection. We also demonstrate high efficiency of cancer cell recovery (93.3 ± 4.8%) and specific retrieval of various epithelial to mesenchymal transition (EMT) phenotype cell fractions from respective outlets of the microfluidic device. EMT is closely associated with metastasis, drug resistance and tumor-initiating potential. This procedure is validated with clinical samples, and further demonstrate the efficacy of bladder wash procedure to reduce EBCCs counts over time. Overall, the uniqueness of a rapid and non-invasive method permitting the separation of different EMT phenotypes shows high potential for clinical utility. We expect this approach will better facilitate the routine screening procedure in BC and greatly enhance personalized treatment.

Dynasore protects the ocular surface against damaging oxidative stress

Water soluble "vital" dyes are commonly used clinically to evaluate health of the ocular surface; however, staining mechanisms remain poorly understood. Recent evidence suggests that sublethal damage stimulates vital dye uptake by individual living cells. Since cell damage can also stimulate reparative plasma membrane remodeling, we hypothesized that dye uptake occurs via endocytic vesicles. In support of this idea, we show here that application of oxidative stress to relatively undifferentiated monolayer cultures of human corneal epithelial cells stimulates both dye uptake and endocytosis, and that dye uptake is blocked by co-treatment with three different endocytosis inhibitors. Stress application to stratified and differentiated corneal epithelial cell cultures, which are a better model of the ocular surface, also stimulated dye uptake; however, endocytosis was not stimulated, and two of the endocytosis inhibitors did not block dye uptake. The exception was Dynasore and its more potent analogue Dyngo-4a, both small molecules developed to target dynamin family GTPases, but also having off-target effects on the plasma membrane. Significantly, while Dynasore blocked stress-stimulated dye uptake at the ocular surface of ex vivo mouse eyes when treatment was performed at the same time as eyes were stressed, it had no effect when used after stress was applied and the ocular surface was already damaged. Thus, Dynasore could not be working by inhibiting endocytosis. Employing cytotoxicity and western blotting assays, we went on to demonstrate an alternative mechanism. We show that Dynasore is remarkably protective of cells and their surface glycocalyx, preventing damage due to stress, and thus precluding dye entry. These unexpected and novel findings provide greater insight into the mechanisms of vital dye uptake and point the direction for future study. Significantly, they also suggest that Dynasore and its analogues might be used therapeutically to protect the ocular surface and to treat ocular surface disease.

Muscle membrane integrity in Duchenne muscular dystrophy: recent advances in copolymer-based muscle membrane stabilizers

The scientific premise, design, and structure-function analysis of chemical-based muscle membrane stabilizing block copolymers are reviewed here for applications in striated muscle membrane injury. Synthetic block copolymers have a rich history and wide array of applications from industry to biology. Potential for discovery is enabled by a large chemical space for block copolymers, including modifications in block copolymer mass, composition, and molecular architecture. Collectively, this presents an impressive chemical landscape to leverage distinct structure-function outcomes. Of particular relevance to biology and medicine, stabilization of damaged phospholipid membranes using amphiphilic block copolymers, classified as poloxamers or pluronics, has been the subject of increasing scientific inquiry. This review focuses on implementing block copolymers to protect fragile muscle membranes against mechanical stress. The review highlights interventions in Duchenne muscular dystrophy, a fatal disease of progressive muscle deterioration owing to marked instability of the striated muscle membrane. Biophysical and chemical engineering advances are presented that delineate and expand upon current understanding of copolymer-lipid membrane interactions and the mechanism of stabilization. The studies presented here serve to underscore the utility of copolymer discovery leading toward the therapeutic application of block copolymers in Duchenne muscular dystrophy and potentially other biomedical applications in which membrane integrity is compromised.

Mode of action of poloxamer-based surfactants in wound care and efficacy on biofilms

Surfactants are widely used as detergents, emulsifiers, wetting agents, foaming agents, and dispersants in both the food and oil industry. Their use in a clinical setting is also common, particularly in wound care. Complicated or chronic wounds show clinical signs of delayed healing, persistent inflammation, and the production of non-viable tissue. These types of wounds also present challenges such as infection and potentially house antimicrobial-tolerant biofilms. The use of wound cleansers to aid cleaning and debridement of the wound is essential. A large proportion of skin and wound cleansers contain surfactants but there is only a small amount of data that shows the effectiveness of them in the enhancement of wound closure. This review paper aims to explore the available literature surrounding the use and mode of action of surfactants in wound healing, in particular Poloxamer 188 (Pluronic F-68) and Poloxamer 407 (Pluronic F-127), and also uncover the potential mechanisms behind the enhancement of wound healing and comparison to other surfactants used in wound care. Furthermore, the presence of a microbial biofilm in the wound is a significant factor in delayed wound healing. Therefore, the effect of clinically used surfactants on biofilms will be discussed, with emphasis on poloxamer-based surfactants.

Needleless emulsion electrospinning for the regulated delivery of susceptible proteins

In the present work, we developed a novel needleless emulsion electrospinning technique that improves the production rate of the core/shell production process. The nanofibres are based on poly-ε-caprolactone (PCL) as a continuous phase combined with a droplet phase based on Pluronic F-68 (PF-68). The PCL-PF-68 nanofibres show a time-regulated release of active molecules. Needleless emulsion electrospinning was used to encapsulate a diverse set of compounds to the core phase [i.e. 5-(4,6-dichlorotriazinyl) aminofluorescein -PF-68, horseradish peroxidase, Tetramethylrhodamine-dextran, insulin growth factor-I, transforming growth factor-β and basic fibroblast growth factor]. In addition, the PF-68 facilitates the preservation of the bioactivity of delivered proteins. The system's potential was highlighted by an improvement in the metabolic activity and proliferation of mesenchymal stem cells. The developed system has the potential to deliver susceptible molecules in tissue-engineering applications.

Nanoprecipitated catestatin released from pharmacologically active microcarriers (PAMs) exerts pro-survival effects on MSC

Catestatin (CST), a fragment of Chromogranin-A, exerts angiogenic, arteriogenic, vasculogenic and cardioprotective effects. CST is a very promising agent for revascularization purposes, in "NOOPTION" patients. However, peptides have a very short half-life after administration and must be conveniently protected. Fibronectin-coated pharmacologically active microcarriers (FN-PAM), are biodegradable and biocompatible polymeric microspheres that can convey mesenchymal stem cell (MSCs) and therapeutic proteins delivered in a prolonged manner. In this study, we first evaluated whether a small peptide such as CST could be nanoprecipitated and incorporated within FN-PAMs. Subsequently, whether CST may be released in a prolonged manner by functionalized FN-PAMs (FN-PAM-CST). Finally, we assessed the effect of CST released by FN-PAM-CST on the survival of MSCs under stress conditions of hypoxia-reoxygenation. An experimental design, modifying three key parameters (ionic strength, mixing and centrifugation time) of protein nanoprecipitation, was used to define the optimum condition for CST. An optimal nanoprecipitation yield of 76% was obtained allowing encapsulation of solid CST within FN-PAM-CST, which released CST in a prolonged manner. In vitro, MSCs adhered to FN-PAMs, and the controlled release of CST from FN-PAM-CST greatly limited hypoxic MSC-death and enhanced MSC-survival in post-hypoxic environment. These results suggest that FN-PAM-CST are promising tools for cell-therapy.

The Pentablock Amphiphilic Copolymer T1107 Prevents Aggregation of Denatured and Reduced Lysozyme

Aggregation of denatured or unfolded proteins establishes a large energy barrier to spontaneous recovery of protein form and function following traumatic injury, tissue cryopreservation, and biopharmaceutical storage. Some tissues utilize small heat shock proteins (sHSPs) to prevent irreversible aggregation, which allows more complex processes to refold or remove the unfolded proteins. It is postulated that large, amphiphilic, and biocompatible block copolymers can mimic sHSP function. Reduced and denatured hen egg white lysozyme (HEWL) is used as a model aggregating protein. The poloxamine T1107 prevents aggregation of HEWL at 37 °C by three complimentary measures. Structural analysis of denatured HEWL reveals a partially folded conformation with preserved or promoted beta-sheet structures only in the presence of T1107. The physical association of T1107 with denatured HEWL, and the ability to prevent aggregation, is linked to the critical micelle temperature of the polymer. The results suggest that T1107, or a similar amphiphilic block copolymer, can find use as a synthetic chaperone to augment the innate molecular repair mechanisms of natural cells.

A High-Efficiency Cellular Extraction System for Biological Proteomics

Recent developments in quantitative high-resolution mass spectrometry have led to significant improvements in the sensitivity and specificity of the biochemical analyses of cellular reactions, protein-protein interactions, and small-molecule-drug discovery. These approaches depend on cellular proteome extraction that preserves native protein activities. Here, we systematically analyzed mechanical methods of cell lysis and physical protein extraction to identify those that maximize the extraction of cellular proteins while minimizing their denaturation. Cells were mechanically disrupted using Potter-Elvehjem homogenization, probe- or adaptive-focused acoustic sonication, and were in the presence of various detergents, including polyoxyethylene ethers and esters, glycosides, and zwitterions. Using fluorescence spectroscopy, biochemical assays, and mass spectrometry proteomics, we identified the combination of adaptive focused acoustic (AFA) sonication in the presence of a binary poloxamer-based mixture of octyl-β-glucoside and Pluronic F-127 to maximize the depth and yield of the proteome extraction while maintaining native protein activity. This binary poloxamer extraction system allowed for native proteome extraction comparable in coverage to the proteomes extracted using denaturing SDS or guanidine-containing buffers, including the efficient extraction of all major cellular organelles. This high-efficiency cellular extraction system should prove useful for a variety of cell biochemical studies, including structural and functional proteomics.

Release of β-galactosidase from poloxamine/α-cyclodextrin hydrogels

All mammals lose their ability to produce lactase (β-galactosidase), the enzyme that cleaves lactose into galactose and glucose, after weaning. The prevalence of lactase deficiency (LD) spans from 2 to 15% among northern Europeans, to nearly 100% among Asians. Following lactose consumption, people with LD often experience gastrointestinal symptoms such as abdominal pain, bowel distension, cramps and flatulence, or even systemic problems such as headache, loss of concentration and muscle pain. These symptoms vary depending on the amount of lactose ingested, type of food and degree of intolerance. Although those affected can avoid the uptake of dairy products, in doing so, they lose a readily available source of calcium and protein. In this work, gels obtained by complexation of Tetronic 90R4 with α-cyclodextrin loaded with β-galactosidase are proposed as a way to administer the enzyme immediately before or with the lactose-containing meal. Both molecules are biocompatible, can form gels in situ, and show sustained erosion kinetics in aqueous media. The complex was characterized by FTIR that evidenced an inclusion complex between the polyethylene oxide block and α-cyclodextrin. The release profiles of β-galactosidase from two different matrices (gels and tablets) of the in situ hydrogels have been obtained. The influence of the percentage of Tetronic in media of different pH was evaluated. No differences were observed regarding the release rate from the gel matrices at pH 6 (t₅₀ = 105 min). However, in the case of the tablets, the kinetics were faster and they released a greater amount of 90R4 (25%, t₅₀ = 40–50 min). Also, the amount of enzyme released was higher for mixtures with 25% Tetronic. Using suitable mathematical models, the corresponding kinetic parameters have been calculated. In all cases, the release data fit quite well to the Peppas–Sahlin model equation, indicating that the release of β-galactosidase is governed by a combination of diffusion and erosion processes. It has been observed that the diffusion mechanism prevails over erosion during the first 50 minutes, followed by continued release of the enzyme due to the disintegration of the matrix.

Surface modification of HSA containing magnetic PLGA nanoparticles by poloxamer to decrease plasma protein adsorption

Lifetime prolongation for hydrophobic drug carriers has been the focus of interest for many years. Poloxamer (Pluronic F68, PF68) has been employed in this study for modifying the surface of magnetic poly(d,l-lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) loaded with human serum albumin (HSA) model drug. Surface characteristics of untreated and PF68 treated NPs were analyzed by size, zeta potential and electrophoretic mobility studies. UV-vis spectroscopic analysis, isothermal titration calorimetry (ITC) and dynamic light scattering methods were used to investigate serum protein (bovine serum albumin, BSA) adsorption. Results showed the successful surface attachment of PF68. Among different concentrations (0.1-1%, wt/vol) of PF68 studied, 0.5% was found to be the most useful, since a higher concentration can issue in micelle formation. 50% less BSA tended to be adsorbed on the treated NPs in comparison to the untreated ones.

Renewal of the air-water interface as a critical system parameter of protein stability: aggregation of the human growth hormone and its prevention by surface-active compounds

Soluble proteins are often highly unstable under mixing conditions that involve dynamic contacting between the main liquid phase and a gas phase. The recombinant human growth hormone (rhGH) was recently shown to undergo aggregation into micrometer-sized solid particles composed of non-native (mis- or unfolded) protein, once its solutions were stirred or shaken to generate a continuously renewed air-water interface. To gain deepened understanding and improved quantification of the air-water interface effect on rhGH stability, we analyzed the protein's aggregation rate (r(agg)) at controlled specific air-water surface areas (a(G/L)) established by stirring or bubble aeration. We show that in spite of comparable time-averaged values for a(G/L) (≈ 100 m(2)/m(3)), aeration gave a 40-fold higher r(agg) than stirring. The enhanced r(agg) under aeration was ascribed to faster macroscopic regeneration of free a(G/L) during aeration as compared to stirring. We also show that r(agg) was independent of the rhGH concentration in the range 0.67 - 6.7 mg/mL, and that it increased linearly dependent on the available a(G/L). The nonionic surfactant Pluronic F-68, added in 1.6-fold molar excess over rhGH present, resulted in complete suppression of r(agg). Foam formation was not a factor influencing r(agg). Using analysis by circular dichroism spectroscopy and small-angle X-ray scattering, we show that in the presence of Pluronic F-68 under both stirring and aeration, the soluble protein retained its original fold, featuring native-like relative composition of secondary structural elements. We further provide evidence that the efficacy of Pluronic F-68 resulted from direct, probably hydrophobic protein-surfactant interactions that prevented rhGH from becoming attached to the air-water interface. Surface-induced aggregation of rhGH is suggested to involve desorption of non-native protein from the air-water interface as the key limiting step. Proteins or protein aggregates released back into the bulk liquid appear to be essentially insoluble.

Preservation of human tear protein structure and function by a novel contact lens multipurpose solution containing protein-stabilizing agents

OBJECTIVES

Tear film proteins have antimicrobial and other functions that may be lost after denaturation during contact lens wear. A new multipurpose solution has recently become available (Biotrue, Bausch + Lomb Inc., Rochester, NY), which contains protein-stabilizing agents including hyaluronic acid, poloxamine, and sulfobetaine 10, the latter used previously as a laboratory tool to renature proteins. We examine whether this new multipurpose solution formulation can prevent the denaturation of human lactoferrin and lysozyme at physiologic levels in response to a powerful denaturing challenge.

METHODS

Human lactoferrin and lysozyme were treated with sodium dodecyl sulfate (SDS) either with or without an investigational version of the new multipurpose solution (without its two disinfectant agents) (investigational multipurpose solution [iMPS]). The structure was assessed by native-polyacrylamide gel electrophoresis (PAGE), differential scanning calorimetry (DSC), and fluorometry; additionally, antimicrobial activity against Pseudomonas aeruginosa and Staphylococcus aureus was measured.

RESULTS

The iMPS prevented an SDS-induced shift in the native-PAGE banding position of lactoferrin. The SDS treatment substantially altered the lactoferrin DSC and fluorescence spectra, indicating that the protein had denatured. This change did not occur in the presence of iMPS. Lactoferrin and lysozyme showed antibacterial and bacteriolytic activity, which was abolished after SDS treatment; this loss of activity did not occur for proteins treated with iMPS.

CONCLUSIONS

These data clearly show that the iMPS prevents the denaturation of physiologic levels of human lactoferrin and lysozyme by the strongly denaturing surfactant SDS and that stabilized proteins retain their function. We conclude that this solution has the capacity to stabilize the structure and function of tear proteins.

Molecular origins of surfactant-mediated stabilization of protein drugs

Loss of activity through aggregation and surface-induced denaturation is a significant problem in the production, formulation and administration of therapeutic proteins. Surfactants are commonly used in upstream and downstream processing and drug formulation. However, the effectiveness of a surfactant strongly depends on its mechanism(s) of action and properties of the protein and interfaces. Surfactants can modulate adsorption loss and aggregation by coating interfaces and/or participating in protein-surfactant associations. Minimizing protein loss from colloidal and interfacial interaction requires a fundamental understanding of the molecular factors underlying surfactant effectiveness and mechanism. These concepts provide direction for improvements in the manufacture and finishing of therapeutic proteins. We summarize the roles of surfactants, proteins, and surfactant-protein complexes in modulating interfacial behavior and aggregation. These events depend on surfactant properties that may be quantified using a thermodynamic model, to provide physical/chemical direction for surfactant selection or design, and to effectively reduce aggregation and adsorption loss.

Investigating the effects of sodium dodecyl sulfate on the aggregative behavior of hen egg-white lysozyme at acidic pH

The research presented here is aimed at examining the effects of sodium dodecyl sulfate on the aggregative behavior of hen egg-white lysozyme at pH 2.0. Through various spectroscopic techniques, dynamic light scattering, and electron microscopy, we first demonstrated that SDS exhibited a biphasic effect on lysozyme fibrillation. The presence of SDS at higher concentrations (e.g., 0.25, 5.00, or 20.00 mM SDS) was found to suppress fibril formation of lysozyme whereas fibrillogenic lysozyme-SDS ensemble containing beta-sheet-rich conformation was observed upon the addition of lower concentrations of SDS (e.g., 0.00, 0.06, or 0.1mM SDS). Next, our equilibrium urea-unfolding data revealed that lysozyme samples with higher SDS concentrations showed superior thermodynamic stabilities over the ones with no or lower levels of SDS. Finally, the correlation between SDS concentration and lysozyme aggregative/fibrillogenic propensity and the underlying interacting mechanism were further explored using surface tensiometry and isothermal titration calorimetry. We believe the outcome from this work may not only help decipher the molecular mechanism of amyloid fibrillation, but also shed light on a rational design of potential therapeutic strategies for amyloid pathology.

Amyloid fibrillation and cytotoxicity of insulin are inhibited by the amphiphilic surfactants

Amyloid fibrils have been associated with at least 25 different degenerative diseases. The 51-residue polypeptide hormone insulin, which is associated with type II diabetes, has been shown to self-assemble to form amyloid fibrils in vitro. With bovine insulin as a model, the research presented here explores the effects of two amphiphilic surfactants (1,2-dihexanoyl-sn-glycero-3-phosphocholine (di-C7-PC) and 1,2-diheptanoyl-sn-glycero-3-phosphocholine (di-C7-PC)) on the in vitro fibrillation process of bovine insulin at pH 2.0 and 55 degrees C. We demonstrated that insulin fibrillation may be inhibited by both surfactants in a dose-dependent fashion. The best inhibition of fibril formation is observed when insulin is incubated with 4mM di-C7-PC. Moreover, the addition of either surfactant at the concentrations studied attenuated insulin fibril-induced cytotoxicity in both PC12 and SH-SY5Y cell lines. The results from this work may contribute to the understanding of the molecular factors affecting amyloid fibrillation and the molecular mechanism(s) of the interactions between the membrane and amyloid proteins.