The role of lipid II in membrane binding of and pore formation by nisin analyzed by two combined biosensor techniques

Absence of Synergism between a Dual-AMP Biogel and Antibiotics Used as Therapeutic Agents for Diabetic Foot Infections

Diabetic foot infections (DFIs) are frequently linked to diabetic-related morbidity and death because of the ineffectiveness of conventional antibiotics against multidrug-resistant bacteria. Pexiganan and nisin A are antimicrobial peptides (AMPs), and their application may complement conventional antibiotics in DFI treatment. A collagen 3D model, previously established to mimic a soft-tissue collagen matrix, was used to evaluate the antibacterial efficacy of a guar gum gel containing pexiganan and nisin alone and combined with three antimicrobials toward the biofilms of Staphylococcus aureus and Pseudomonas aeruginosa isolated from infected foot ulcers. Antimicrobials and bacterial diffusion were confirmed by spot-on-lawn and bacterial growth by bacterial count (cfu/mL). Our main conclusion was that the dual-AMP biogel combined with gentamicin, clindamycin, or vancomycin was not able to significantly reduce bacterial growth or eradicate S. aureus and P. aeruginosa DFI isolates. We further reported an antagonism between dual-AMP and dual-AMP combined with antibiotics against S. aureus.

The Functionality of Membrane-Inserting Proteins and Peptides: Curvature Sensing, Generation, and Pore Formation

Proteins and peptides with hydrophobic and amphiphilic segments are responsible for many biological functions. The sensing and generation of membrane curvature are the functions of several protein domains or motifs. While some specific membrane proteins play an essential role in controlling the curvature of distinct intracellular membranes, others participate in various cellular processes such as clathrin-mediated endocytosis, where several proteins sort themselves at the neck of the membrane bud. A few membrane-inserting proteins form nanopores that permeate selective ions and water to cross the membrane. In addition, many natural and synthetic small peptides and protein toxins disrupt the membrane by inducing nonspecific pores in the membrane. The pore formation causes cell death through the uncontrolled exchange between interior and exterior cellular contents. In this article, we discuss the insertion depth and orientation of protein/peptide helices, and their role as a sensor and inducer of membrane curvature as well as a pore former in the membrane. We anticipate that this extensive review will assist biophysicists to gain insight into curvature sensing, generation, and pore formation by membrane insertion.

Plantaricin A, Derived from Lactiplantibacillus plantarum, Reduces the Intrinsic Resistance of Gram-Negative Bacteria to Hydrophobic Antibiotics

The outer membrane of Gram-negative bacteria is one of the major factors contributing to the development of antibiotic resistance, resulting in a lack of effectiveness of several hydrophobic antibiotics. Plantaricin A (PlnA) intensifies the potency of antibiotics by increasing the permeability of the bacterial outer membrane. Moreover, it has been proven to bind to the lipopolysaccharide of Escherichia coli via electrostatic and hydrophobic interactions and to interfere with the integrity of the bacterial outer membrane. Based on this mechanism, we designed a series of PlnA1 analogs by changing the structure, hydrophobicity, and charge to enhance their membrane-permeabilizing ability. Subsequent analyses revealed that among the PlnA1 analogs, OP4 demonstrated the highest penetrating ability, weaker cytotoxicity, and a higher therapeutic index. In addition, it decelerated the development of antibiotic resistance when the E. coli cells were continuously exposed to sublethal concentrations of erythromycin and ciprofloxacin for 30 generations. Further in vivo studies in mice with sepsis showed that OP4 heightens the potency of erythromycin against E. coli and relieves inflammation. In summary, our results showed that the PlnA1 analogs investigated in the present study, especially OP4, reduce the intrinsic antibiotic resistance of Gram-negative pathogens and expand the antibiotic sensitivity spectrum of hydrophobic antibiotics in Gram-negative bacteria. IMPORTANCE Antibiotic resistance is a global health concern due to indiscriminate use of antibiotics, resistance transfer, and intrinsic resistance of certain Gram-negative bacteria. The asymmetric bacterial outer membrane prevents the entry of hydrophobic antibiotics and renders them ineffective. Consequently, these antibiotics could be employed to treat infections caused by Gram-negative bacteria, after increasing their outer membrane permeability. As PlnA reportedly penetrates outer membranes, we designed a series of PlnA1 analogs and proved that OP4, one of these antimicrobial peptides, effectively augmented the permeability of the bacterial outer membrane. Furthermore, OP4 effectively improved the potency of erythromycin and alleviated inflammatory responses caused by Escherichia coli infection. Likewise, OP4 curtailed antibiotic resistance development in E. coli, thereby prolonging exposure to sublethal antibiotic concentrations. Thus, the combined use of hydrophobic antibiotics and OP4 could be used to treat infections caused by Gram-negative bacteria by decreasing their intrinsic antibiotic resistance.

Therapeutic Potential of Antimicrobial Peptides in Polymicrobial Biofilm-Associated Infections

It is widely recognized that many chronic infections of the human body have a polymicrobial etiology. These include diabetic foot ulcer infections, lung infections in cystic fibrosis patients, periodontitis, otitis, urinary tract infections and even a proportion of systemic infections. The treatment of mixed infections poses serious challenges in the clinic. First, polymicrobial communities of microorganisms often organize themselves as biofilms that are notoriously recalcitrant to antimicrobial therapy and clearance by the host immune system. Secondly, a plethora of interactions among community members may affect the expression of virulence factors and the susceptibility to antimicrobials of individual species in the community. Therefore, new strategies able to target multiple pathogens in mixed populations need to be urgently developed and evaluated. In this regard, antimicrobial or host defense peptides (AMPs) deserve particular attention as they are endowed with many favorable features that may serve to this end. The aim of the present review is to offer a comprehensive and updated overview of studies addressing the therapeutic potential of AMPs in mixed infections, highlighting the opportunities offered by this class of antimicrobials in the fight against polymicrobial infections, but also the limits that may arise in their use for this type of application.

Pexiganan in Combination with Nisin to Control Polymicrobial Diabetic Foot Infections

Diabetic foot ulcers (DFUs) are major complications of Diabetes mellitus being responsible for significant morbidity and mortality. DFUs frequently become chronically infected by a complex community of bacteria, including multidrug-resistant and biofilm-producing strains of Staphylococcus aureus and Pseudomonas aeruginosa. Diabetic foot infections (DFI) are often recalcitrant to conventional antibiotics and alternative treatment strategies are urgently needed. Antimicrobial Peptides (AMPs), such as pexiganan and nisin, have been increasingly investigated and reported as effective antimicrobial agents. Here, we evaluated the antibacterial potential of pexiganan and nisin used in combination (dual-AMP) to control the growth of planktonic and biofilm co-cultures of S. aureus and P. aeruginosa clinical strains, co-isolated from a DFU. A DFU collagen three-dimensional (3D) model was used to evaluate the distribution and efficacy of AMPs locally delivered into the model. The concentration of pexiganan required to inhibit and eradicate both planktonic and biofilm-based bacterial cells was substantially reduced when used in combination with nisin. Moreover, incorporation of both AMPs in a guar gum delivery system (dual-AMP biogel) did not affect the dual-AMP antimicrobial activity. Importantly, the application of the dual-AMP biogel resulted in the eradication of the S. aureus strain from the model. In conclusion, data suggest that the local application of the dual-AMPs biogel constitutes a potential complementary therapy for the treatment of infected DFU.

Mode of action of nisin on Escherichia coli

Nisin is a class I polycyclic bacteriocin produced by the bacterium Lactococcus lactis, which is used extensively as a food additive to inhibit the growth of foodborne Gram-positive bacteria. Nisin also inhibits growth of Gram-negative bacteria when combined with membrane-disrupting chelators such as citric acid. To gain insight into nisin's mode of action, we analyzed chemical-genetic interactions and identified nisin-sensitive Escherichia coli strains in the Keio library of knockout mutants. The most sensitive mutants fell into two main groups. The first group accords with the previously proposed mode of action based on studies with Gram-positive bacteria, whereby nisin interacts with factors involved in cell wall, membrane, envelope biogenesis. We identified an additional, novel mode of action for nisin based on the second group of sensitive mutants that involves cell cycle and DNA replication, recombination, and repair. Further analyses supported these two distinct modes of action.

Lipid-II Independent Antimicrobial Mechanism of Nisin Depends On Its Crowding And Degree Of Oligomerization

Nisin inhibits bacterial growth by generating pores in cell membrane and interrupting cell-wall biosynthesis through specific lipid II interaction. However, the role of the hinge region and C-terminus residues of the peptide in antibacterial action of nisin is largely unknown. Here, using molecular dynamics simulations and experimental approach, we report that at high concentration regimes of nisin, interaction with phospholipids may equally deform the bacterial cell membranes even under significantly varying amounts of lipid-II. Membrane thinning, destabilization and decrease in lipid density depend on the degree of oligomerization of nisin. Growth kinetics of Bacillus subtilis and Escherichia coli interestingly show recovery by extended lag phase under low concentrations of nisin treatment while high concentrations of nisin caused decrease in cell viability as recorded by striking reduction in membrane potential and surface area. The significant changes in the dipole potential and fluorescence anisotropy were observed in negatively charged membranes in the absence of lipid-II with increasing concentration of nisin. The identical correlation of cell viability, membrane potential dissipation and morphology with the concentration regime of nisin, in both Bacillus subtilis (lipid II rich) and Escherichia coli (lipid II impoverished), hints at a non-specific physical mechanism where degree of membrane deformation depends on degree of crowding and oligomerization of nisin.

Mechanism of Four de Novo Designed Antimicrobial Peptides

As pathogenic bacteria become resistant to traditional antibiotics, alternate approaches such as designing and testing new potent selective antimicrobial peptides (AMP) are increasingly attractive. However, whereas much is known regarding the relationship between the AMP sequence and potency, less research has focused on developing links between AMP properties, such as design and structure, with mechanisms. Here we use four natural AMPs of varying known secondary structures and mechanisms of lipid bilayer disruption as controls to determine the mechanisms of four rationally designed AMPs with similar secondary structures and rearranged amino acid sequences. Using a Quartz Crystal Microbalance with Dissipation, we were able to differentiate between molecular models of AMP actions such as barrel-stave pore formation, toroidal pore formation, and peptide insertion mechanisms by quantifying differential frequencies throughout an oscillating supported lipid bilayer. Barrel-stave pores were identified by uniform frequency modulation, whereas toroidal pores possessed characteristic changes in oscillation frequency throughout the bilayer. The resulting modes of action demonstrate that rearrangement of an amino acid sequence of the AMP resulted in identical overall mechanisms, and that a given secondary structure did not necessarily predict mechanism. Also, increased mass addition to Gram-positive mimetic membranes from AMP disruption corresponded with lower minimum inhibitory concentrations against the Gram-positive Staphylococcus aureus.

New insights into the mode of action of the lantibiotic salivaricin B

Salivaricin B is a 25 amino acid polycyclic peptide belonging to the type AII lantibiotics and first shown to be produced by Streptococcus salivarius. In this study we describe the bactericidal mode of action of salivaricin B against susceptible Gram-positive bacteria. The killing action of salivaricin B required micro-molar concentrations of lantibiotic whereas the prototype lantibiotic nisin A was shown to be potent at nano-molar levels. Unlike nisin A, salivaricin B did not induce pore formation or dissipate the membrane potential in susceptible cells. This was established by measuring the fluorescence of the tryptophan residue at position 17 when salivaricin B interacted with bacterial membrane vesicles. The absence of a fluorescence blue shift indicates a failure of salivaricin B to penetrate the membranes. On the other hand, salivaricin B interfered with cell wall biosynthesis, as shown by the accumulation of the final soluble cell wall precursor UDP-MurNAc-pentapeptide which is the backbone of the bacterial peptidoglycan. Transmission electron microscopy of salivaricin B-treated cells showed a reduction in cell wall thickness together with signs of aberrant septum formation in the absence of visible changes to cytoplasmic membrane integrity.

Effects of chitosan combined with nisin treatment on storage quality of large yellow croaker (Pseudosciaena crocea)

Effects of chitosan combined with different concentrations of nisin on quality enhancement of large yellow croaker (Pseudosciaena crocea) stored at 4 °C were evaluated for 8 days. Changes in sensory score and volatile spoilage products, total viable counts (TVC), and physiochemical indexes including weight loss, colour, pH, total volatile basic nitrogen (TVB-N), and K-value were examined. Results demonstrated that nisin-treated samples presented better quality preservation effects than chitosan alone. 1% chitosan combined with 0.6% nisin presented optimal quality enhancement effects, such as moisture loss control, volatile spoilage inhibition, TVB-N reduction, TVC growth control, and colour and sensory acceptability maintenance. Therefore, chitosan combined with nisin is promising in large yellow croaker shelf life extension.

New Insights into Nisin's Antibacterial Mechanism Revealed by Binding Studies with Synthetic Lipid II Analogues

Nisin is the preeminent lantibiotic, and to date its antibacterial mechanism has been investigated using a variety of techniques. While nisin's lipid II-mediated mode of action is well-established, a detailed analysis of the thermodynamic parameters governing this interaction has not been previously reported. We here describe an approach employing isothermal titration calorimetry to directly measure the affinity of nisin for lipid II and a number of synthetic lipid II precursors and analogues. Our measurements confirm the pyrophosphate unit of lipid II as the primary site of nisin binding and also indicate that the complete MurNAc moiety is required for a high-affinity interaction. Additionally, we find that while the pentapeptide unit of the lipid II molecule is not required for strong binding by nisin, it does play an important role in stabilizing the subsequently formed nisin-lipid II pore complex, albeit at an entropic cost. The anchoring of lipid II in a membrane environment was also found to play a significant role in enhancing nisin binding and is required in order to achieve a high-affinity interaction.

Structural variations of the cell wall precursor lipid II and their influence on binding and activity of the lipoglycopeptide antibiotic oritavancin

Oritavancin is a semisynthetic derivative of the glycopeptide antibiotic chloroeremomycin with activity against Gram-positive pathogens, including vancomycin-resistant staphylococci and enterococci. Compared to vancomycin, oritavancin is characterized by the presence of two additional residues, a hydrophobic 4'-chlorobiphenyl methyl moiety and a 4-epi-vancosamine substituent, which is also present in chloroeremomycin. Here, we show that oritavancin and its des-N-methylleucyl variant (des-oritavancin) effectively inhibit lipid I- and lipid II-consuming peptidoglycan biosynthesis reactions in vitro. In contrast to that for vancomycin, the binding affinity of oritavancin to the cell wall precursor lipid II appears to involve, in addition to the D-Ala-D-Ala terminus, other species-specific binding sites of the lipid II molecule, i.e., the crossbridge and D-isoglutamine in position 2 of the lipid II stem peptide, both characteristic for a number of Gram-positive pathogens, including staphylococci and enterococci. Using purified lipid II and modified lipid II variants, we studied the impact of these modifications on the binding of oritavancin and compared it to those of vancomycin, chloroeremomycin, and des-oritavancin. Analysis of the binding parameters revealed that additional intramolecular interactions of oritavancin with the peptidoglycan precursor appear to compensate for the loss of a crucial hydrogen bond in vancomycin-resistant strains, resulting in enhanced binding affinity. Augmenting previous findings, we show that amidation of the lipid II stem peptide predominantly accounts for the increased binding of oritavancin to the modified intermediates ending in D-Ala-D-Lac. Corroborating our conclusions, we further provide biochemical evidence for the phenomenon of the antagonistic effects of mecA and vanA resistance determinants in Staphylococcus aureus, thus partially explaining the low frequency of methicillin-resistant S. aureus (MRSA) acquiring high-level vancomycin resistance.

Type AII lantibiotic bovicin HJ50 with a rare disulfide bond: structure, structure-activity relationships and mode of action

Lantibiotics are ribosomally synthesized antimicrobial peptides containing unusual amino acids. As promising alternatives to conventional antibiotics, they have a high potential for alleviating the problem of emergent antibiotic resistance, with possible applications in many industries that have antibacterial demand. Bovicin HJ50 is a type AII lantibiotic, the largest group of lantibiotics, comprising a linear N-terminal region and a globular C-terminal region. Interestingly, bovicin H50 has a disulfide bond that is rare in this group. Owing to limited information about the spatial structures of type AII lantibiotics, the functional regions of this type and the role of the disulfide bond are still unknown. In the present study, we resolved the solution structure of bovicin HJ50 using NMR spectroscopy. This is the first spatial structure of a type AII lantibiotic. Bovicin HJ50 exhibited high flexibility in aqueous solution, whereas varied rigidities were observed in the different rings with the conserved ring A being the most rigid. The charged residues Lys¹¹, Asp¹² and Lys³⁰, as well as the essential disulfide bond were critical for antimicrobial activity. Importantly, bovicin HJ50 showed not only peptidoglycan precursor lipid II-binding ability, but also pore-forming activity, which is significantly different from other bacteriostatic type AII lantibiotics, suggesting a novel antimicrobial mechanism.

Antagonistic effect of protein extracts from Streptococcus sanguinis on pathogenic bacteria and fungi of the oral cavity

An antibacterial substance from Streptococcus sanguinis (S. sanguinis) is known to have an inhibitory effect on putative periodontal pathogens, but its inhibitory effect on pathogens of oral candidiasis is unknown. In this study, intracellular and exocrine proteins were extracted from S. sanguinis. The antagonistic effect of the protein extracts on Prevotella intermedia (P. intermedia) and Porphyromonas gingivalis (P. gingivalis) was detected by a well-plate technique, and the effects of the protein extracts on biofilms formed by these bacteria were evaluated by confocal laser scanning microscopy. The antagonistic effect of the protein extracts on pathogenic fungi was investigated using Candida albicans (C. albicans) and Candida tropicalis (C. tropicalis). The growth curves of C. albicans and C. tropicalis were determined from ultraviolet absorption measurements, their morphological changes following treatment were observed by optical microscopy and scanning electron microscopy, and the effects of the protein extracts on the thickness of their biofilms and the distribution of dead/live bacteria within the biofilms were detected by confocal laser scanning microscopy. The results showed significant inhibitory effects of the intracellular proteins extracted from S. sanguinis on pathogenic bacteria (P. intermedia and P. gingivalis), fungi (C. albicans and C. tropicalis) and the biofilms formed by them. Furthermore, the growth curves and morphology of C. albicans and C. tropicalis were altered following treatment with the intracellular proteins, resulting in disc-like depressions in the surfaces of the fungal spores and mycelia. By contrast, the exocrine proteins demonstrated no significant inhibitory effect on the pathogenic bacteria, fungi and the biofilms formed by them. Thus, it may be concluded that intracellular proteins of S. sanguinis have antibacterial activity and exert an antagonistic effect on certain pathogenic bacteria and fungi of the oral cavity.

An in vitro study on the effects of nisin on the antibacterial activities of 18 antibiotics against Enterococcus faecalis

Enterococcus faecalis rank among the leading causes of nosocomial infections worldwide and possesses both intrinsic and acquired resistance to a variety of antibiotics. Development of new antibiotics is limited, and pathogens continually generate new antibiotic resistance. Many researchers aim to identify strategies to effectively kill this drug-resistant pathogen. Here, we evaluated the effect of the antimicrobial peptide nisin on the antibacterial activities of 18 antibiotics against E. faecalis. The MIC and MBC results showed that the antibacterial activities of 18 antibiotics against E. faecalis OG1RF, ATCC 29212, and strain E were significantly improved in the presence of 200 U/ml nisin. Statistically significant differences were observed between the results with and without 200 U/ml nisin at the same concentrations of penicillin or chloramphenicol (p<0.05). The checkerboard assay showed that the combination of nisin and penicillin or chloramphenicol had a synergetic effect against the three tested E. faecalis strains. The transmission electron microscope images showed that E. faecalis was not obviously destroyed by penicillin or chloramphenicol alone but was severely disrupted by either antibiotic in combination with nisin. Furthermore, assessing biofilms by a confocal laser scanning microscope showed that penicillin, ciprofloxacin, and chloramphenicol all showed stronger antibiofilm actions in combination with nisin than when these antibiotics were administered alone. Therefore, nisin can significantly improve the antibacterial and antibiofilm activities of many antibiotics, and certain antibiotics in combination with nisin have considerable potential for use as inhibitors of this drug-resistant pathogen.

Lipid-II forms potential "landing terrain" for lantibiotics in simulated bacterial membrane

Bacterial cell wall is targeted by many antibiotics. Among them are lantibiotics, which realize their function via interaction with plasma membrane lipid-II molecule — a chemically conserved part of the cell wall synthesis pathway. To investigate structural and dynamic properties of this molecule, we have performed a series of nearly microsecond-long molecular dynamics simulations of lipid-II and some of its analogs in zwitterionic single component and charged mixed simulated phospholipid bilayers (the reference and the mimic of the bacterial plasma membrane, respectively). Extensive analysis revealed that lipid-II forms a unique “amphiphilic pattern” exclusively on the surface of the simulated bacterial membrane (and not in the reference one). We hypothesize that many lantibiotics exploit the conserved features of lipid-II along with characteristic modulation of the bacterial membrane as the “landing site”. This putative recognition mechanism opens new opportunities for studies on lantibiotics action and design of novel armament against resistant bacterial strains.

A dry membrane protection technique to allow surface acoustic wave biosensor measurements of biological model membrane approaches

Model membrane approaches have attracted much attention in biomedical sciences to investigate and simulate biological processes. The application of model membrane systems for biosensor measurements is partly restricted by the fact that the integrity of membranes critically depends on the maintenance of an aqueous surrounding, while various biosensors require a preconditioning of dry sensors. This is for example true for the well-established surface acoustic wave (SAW) biosensor SAM®5 blue. Here, a simple drying procedure of sensor-supported model membranes is introduced using the protective disaccharide trehalose. Highly reproducible model membranes were prepared by the Langmuir-Blodgett technique, transferred to SAW sensors and supplemented with a trehalose solution. Membrane rehydration after dry incorporation into the SAW device becomes immediately evident by phase changes. Reconstituted model membranes maintain their full functionality, as indicated by biotin/avidin binding experiments. Atomic force microscopy confirmed the morphological invariability of dried and rehydrated membranes. Approximating to more physiological recognition phenomena, the site-directed immobilization of the integrin VLA-4 into the reconstituted model membrane and subsequent VCAM-1 ligand binding with nanomolar affinity were illustrated. This simple drying procedure is a novel way to combine the model membrane generation by Langmuir-Blodgett technique with SAW biosensor measurements, which extends the applicability of SAM®5 blue in biomedical sciences.

Chemical synthesis of the lantibiotic lacticin 481 reveals the importance of lanthionine stereochemistry

Lantibiotics are a family of antibacterial peptide natural products characterized by the post-translational installation of the thioether-containing amino acids lanthionine and methyllanthionine. Until recently, only a single naturally occurring stereochemical configuration for each of these cross-links was known. The discovery of lantibiotics with alternative lanthionine and methyllanthionine stereochemistry has prompted an investigation of its importance to biological activity. Here, solid-supported chemical synthesis enabled the total synthesis of the lantibiotic lacticin 481 and analogues containing cross-links with non-native stereochemical configurations. Biological evaluation revealed that these alterations abolished the antibacterial activity in all of the analogues, revealing the critical importance of the enzymatically installed stereochemistry for the biological activity of lacticin 481.

Lipodepsipeptide empedopeptin inhibits cell wall biosynthesis through Ca2+-dependent complex formation with peptidoglycan precursors

Empedopeptin is a natural lipodepsipeptide antibiotic with potent antibacterial activity against multiresistant Gram-positive bacteria including methicillin-resistant Staphylococcus aureus and penicillin-resistant Streptococcus pneumoniae in vitro and in animal models of bacterial infection. Here, we describe its so far elusive mechanism of antibacterial action. Empedopeptin selectively interferes with late stages of cell wall biosynthesis in intact bacterial cells as demonstrated by inhibition of N-acetylglucosamine incorporation into polymeric cell wall and the accumulation of the ultimate soluble peptidoglycan precursor UDP-N-acetylmuramic acid-pentapeptide in the cytoplasm. Using membrane preparations and the complete cascade of purified, recombinant late stage peptidoglycan biosynthetic enzymes and their respective purified substrates, we show that empedopeptin forms complexes with undecaprenyl pyrophosphate containing peptidoglycan precursors. The primary physiological target of empedopeptin is undecaprenyl pyrophosphate-N-acetylmuramic acid(pentapeptide)-N-acetylglucosamine (lipid II), which is readily accessible at the outside of the cell and which forms a complex with the antibiotic in a 1:2 molar stoichiometry. Lipid II is bound in a region that involves at least the pyrophosphate group, the first sugar, and the proximal parts of stem peptide and undecaprenyl chain. Undecaprenyl pyrophosphate and also teichoic acid precursors are bound with lower affinity and constitute additional targets. Calcium ions are crucial for the antibacterial activity of empedopeptin as they promote stronger interaction with its targets and with negatively charged phospholipids in the membrane. Based on the high structural similarity of empedopeptin to the tripropeptins and plusbacins, we propose this mechanism of action for the whole compound class.

Interaction of type A lantibiotics with undecaprenol-bound cell envelope precursors

Lantibiotics are a unique group within the antimicrobial peptides characterized by the presence of thioether amino acids (lanthionine and methyllanthionine). These peptides are produced by and primarily act on Gram-positive bacteria exerting multiple activities at the cytoplasmic membrane of susceptible strains. Previously, the cell wall precursor lipid II was identified as the molecular target for the prototype lantibiotic nisin. Binding and sequestration of lipid II blocks the incorporation of the central cell wall precursor into the growing peptidoglycan network, thereby inhibiting the formation of a functional cell wall. Additionally, nisin combines this activity with a unique target-mediated pore formation, using lipid II as a docking molecule. The interaction with the pyrophosphate moiety of lipid II is crucial for nisin binding. We show that, besides binding to lipid II, nisin interacts with the lipid intermediates lipid III (undecaprenol-pyrophosphate-N-acetyl-glucosamine) and lipid IV (undecaprenol-pyrophosphate-N-acetyl-glucosamine-N-acetyl-mannosamine) of the wall teichoic acid (WTA) biosynthesis pathway. Binding of nisin to the precursors was observed at a stoichiometry of 2:1. The specific interaction with WTA precursors further promoted target-mediated pore formation in artificial lipid bilayers. Specific interactions with lipid III and lipid IV could also be demonstrated for related type A lantibiotics, for example, gallidermin, containing the conserved lipid-II-binding motif.

Ring A of nukacin ISK-1: a lipid II-binding motif for type-A(II) lantibiotic

Ring A of nukacin ISK-1, which is also present in different type-A(II) lantibiotics, resembles a lipid II-binding motif (TxS/TxD/EC, x denotes undefined residues) similar to that present in mersacidin (type-B lantibiotics), which suggests that nukacin ISK-1 binds to lipid II as a docking molecule. Results from our experiments on peptidoglycan precursor (UDP-MurNAc-pp) accumulation and peptide antagonism assays clearly indicated that nukacin ISK-1 inhibits cell-wall biosynthesis, accumulating lipid II precursor inside the cell, and the peptide activity can be repressed by lipid I and lipid II. Interaction analysis of nukacin ISK-1 and different ring A variants with lipid II revealed that nukacin ISK-1 and nukacin D13E (a more active variant) have a high affinity (K(D) = 0.17 and 0.19 μM, respectively) for lipid II, whereas nukacin D13A (a less active variant) showed a lower affinity, and nukacin C14S (a negative variant lacking the ring A structure) exhibited no interaction. Therefore, on the basis of the structural similarity and positional significance of the amino acids in this region, we concluded that nukacin ISK-1 binds lipid II via its ring A region and may lead to the inhibition of cell-wall biosynthesis.

Biosensor applications in the field of antibiotic research--a review of recent developments

Antibacterials are among of the most important medications used in health care. However, their efficacy is increasingly impeded by a tremendous and globally spread bacterial resistance phenomenon. This bacterial resistance is accelerated by inadequate application of antibacterial drugs in humans, the widespread veterinary use of antibacterials, and antibacterial occurrence in the environment and food. Further, there is a lack of development of innovative novel drugs. Therefore, the search for novel antibacterials has to be intensified and the spread of antibacterials in the environment has to be restricted. Due to the fundamental progress in biosensor development and promising applications in the antibiotic field, this review gives for the first time an overview on the use and prospects of biosensor applications in that area. A number of reports have applied biosensors of different design and techniques to search for antibacterials in environmental and foodstuff matrices. These studies are discussed with respect to the analytical values and compared to conventional techniques. Furthermore, biosensor applications to elucidate the mode of action of antimicrobial drugs in vitro have been described. These studies were critically introduced referring to the informational value of those simulations. In summary, biosensors will be illustrated as an innovative and promising, although not yet comprehensively applied, technique in the antibacterial field.

Model membrane approaches to determine the role of calcium for the antimicrobial activity of friulimicin

Friulimicin is a cyclic lipopeptide antibiotic, currently in clinical development, that possesses excellent activity against Gram-positive bacteria, including multiresistant strains. A recent study on the mode of action of friulimicin reported on the interference with bacterial cell wall biosynthesis via a calcium-dependent complexing of the bactoprenol phosphate carrier C₅₅-P. The calcium dependency of this non-common targeted activity remains to be elucidated. In the present model membrane approach, the role of calcium for friulimicin targeting to C₅₅-P was investigated by biosensor-based detection of binding affinities. The findings were supplemented by atomic force microscopy (AFM) and circular dichroism (CD) spectroscopy. Comparing the calcium salt of friulimicin with the calcium-free peptide, calcium appeared to be essential for friulimicin interaction with DOPC model membranes. The binding affinity was even higher in the presence of 0.1 mol% C₅₅-P (0.21 μM vs. 1.22 μM), confirming the targeted mode of action. Binding experiments with supplemented calcium salts suggest (i) the phosphate group as the essential moiety of C₅₅-P, referring to a bridging function of calcium between the negatively charged friulimicin and C₅₅-P, and (ii) a structural effect of calcium shifting the peptide into a suitable binding conformation (CD spectra). AFM images confirmed that calcium has no, or only a minor, effect on the aggregate formation of friulimicin. These data shed new light on the mechanisms of antibacterial activity of friulimicin.

Comparison between the resistance of benzalkonium chloride-adapted and -nonadapted biofilms of Listeria monocyogenes to modified atmosphere packaging and nisin once transferred to mussels

Benzalkonium chloride-adapted and -nonadapted Listeria monocytogenes biofilm cells were transferred by contact to cooked or live mussels and packed in rich CO(2) and O(2), respectively. The viabilities of transferred cells during storage of these packed samples at 2.5 °C were compared. In addition, in cooked mussels the combined effect of CO(2) and nisin against the survival of L. monocytogenes was also studied by using a first-order factorial design. The results obtained demonstrated that biofilms formed by benzalkonium chloride-adapted L. monocytogenes cells could be more resistant to the application of modified atmospheres rich in CO(2) and nisin once they have been transferred to cooked mussels by contact (simulating cross-contamination). This implies an increase in the risk associated with the presence of these cells in food processing plants. Significant empirical equations obtained after 7, 11, and 20 days showed an inhibitory effect of CO(2) and nisin against L. monocytogenes. However, a significant positive interaction between both variables highlights an incompatibility between CO(2) and nisin at high concentrations. Results also demonstrated that L. monocytogenes could persist after cross-contamination during the processing of live mussels, so L. monocytogenes is of concern as a contaminant in live mussels packaged in high-O(2) atmospheres.

Multiple peptide resistance factor (MprF)-mediated Resistance of Staphylococcus aureus against antimicrobial peptides coincides with a modulated peptide interaction with artificial membranes comprising lysyl-phosphatidylglycerol

Modification of the membrane lipid phosphatidylglycerol (PG) of Staphylococcus aureus by enzymatic transfer of a l-lysine residue leading to lysyl-PG converts the net charge of PG from -1 to +1 and is thought to confer resistance to cationic antimicrobial peptides (AMPs). Lysyl-PG synthesis and translocation to the outer leaflet of the bacterial membrane are achieved by the membrane protein MprF. Consequently, mutants lacking a functional mprF gene are in particular vulnerable to the action of AMPs. Hence, we aim at elucidating whether and to which extent lysyl-PG modulates membrane binding, insertion, and permeabilization by various AMPs. Lysyl-PG was incorporated into artificial lipid bilayers, mimicking the cytoplasmic membrane of S. aureus. Moreover, we determined the activity of the peptides against a clinical isolate of S. aureus strain SA113 and two mutants lacking a functional mprF gene and visualized peptide-induced ultrastructural changes of bacteria by transmission electron microscopy. The studied peptides were: (i) NK-2, an α-helical fragment of mammalian NK-lysin, (ii) arenicin-1, a lugworm β-sheet peptide, and (iii) bee venom melittin. Biophysical data obtained by FRET spectroscopy, Fourier transform infrared spectroscopy, and electrical measurements with planar lipid bilayers were correlated with the biological activities of the peptides. They strongly support the hypothesis that peptide-membrane interactions are a prerequisite for eradication of S. aureus. However, degree and mode of modulation of membrane properties such as fluidity, capacitance, and conductivity were unique for each of the peptides. Altogether, our data support and underline the significance of lysyl-PG for S. aureus resistance to AMPs.

A mechanistic investigation of cell-penetrating Tat peptides with supported lipid membranes

The multifarious Tat peptide derived from the HIV-1 virus exhibits antimicrobial activity. In this article, we use Quartz Crystal Microbalance with Dissipation monitoring (QCM-D) to investigate the mechanisms of action of Tat (44-57) and Tat (49-57) on bacterial-mimetic 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/1,2-dimyristoyl-sn-glycero-3-phospho-rac-(1-glycerol) (sodium salt) (DMPG) membranes. The results reveal that both peptides disrupt DMPC/DMPG membranes via a surface-active (carpet-like) mechanism. The magnitude of this disruption is dependent on both membrane and peptide properties. Firstly, less disruption was observed on the more negatively charged membranes. Secondly, less disruption was observed for the longer and slightly more hydrophobic Tat (44-57) peptide. As a comparison, the behaviour of the two Tat peptides on mammalian-mimetic DMPC/cholesterol membranes was investigated. Consistent with the literature no membrane disruption was observed. These results suggest that both electrostatic and hydrophobic interactions, as well as peptide geometry, determine the antimicrobial activity of Tat. This should guide the development of more potent Tat antibiotics.

The membrane-bound structure and topology of a human α-defensin indicate a dimer pore mechanism for membrane disruption

Defensins are cationic and disulfide-bonded host defense proteins of many animals that target microbial cell membranes. Elucidating the three-dimensional structure, dynamics, and topology of these proteins in phospholipid bilayers is important for understanding their mechanisms of action. Using solid-state nuclear magnetic resonance spectroscopy, we have now determined the conformation, dynamics, oligomeric state, and topology of a human α-defensin, HNP-1, in DMPC/DMPG bilayers. Two-dimensional correlation spectra show that membrane-bound HNP-1 exhibits a conformation similar to that of the water-soluble state, except for the turn connecting strands β2 and β3, whose side chains exhibit immobilization and conformational perturbation upon membrane binding. At high protein/lipid ratios, rapid (1)H spin diffusion from the lipid chains to the protein was observed, indicating that HNP-1 was well inserted into the hydrocarbon core of the bilayer. Arg Cζ-lipid (31)P distances indicate that only one of the four Arg residues forms tight hydrogen-bonded guanidinium-phosphate complexes. The protein is predominantly dimerized at high protein/lipid molar ratios, as shown by (19)F spin diffusion experiments. The presence of a small fraction of monomers and the shallower insertion at lower protein concentrations suggest that HNP-1 adopts concentration-dependent oligomerization and membrane-bound structure. These data strongly support a "dimer pore" topology of HNP-1 in which the polar top of the dimer lines an aqueous pore while the hydrophobic bottom faces the lipid chains. In this structure, R25 lies closest to the membrane surface among the four Arg residues. The pore does not have a high degree of lipid disorder, in contrast to the toroidal pores formed by protegrin-1, a two-stranded β-hairpin antimicrobial peptide. These results provide the first glimpse into the membrane-bound structure and mechanism of action of human α-defensins.

Analysis of membrane interactions of antibiotic peptides using ITC and biosensor measurements

The interaction of the lantibiotic gallidermin and the glycopeptide antibiotic vancomycin with bacterial membranes was simulated using mass sensitive biosensors and isothermal titration calorimetry (ITC). Both peptides interfere with cell wall biosynthesis by targeting the cell wall precursor lipid II, but differ clearly in their antibiotic activity against individual bacterial strains. We determined the binding affinities of vancomycin and gallidermin to model membranes±lipid II in detail. Both peptides bind to DOPC/lipid II membranes with high affinity (K(D) 0.30 μM and 0.27 μM). Gallidermin displayed also strong affinity to pure DOPC membranes (0.53 μM) an effect that was supported by ITC measurements. A surface acoustic wave (SAW) sensor allowed measurements in the picomolar concentration range and revealed that gallidermin targets lipid II at an equimolar ratio and simultaneously inserts into the bilayer. These results indicate that gallidermin, in contrast to vancomycin, combines cell wall inhibition and interference with the bacterial membrane integrity for potent antimicrobial activity.

Membrane lipids determine the antibiotic activity of the lantibiotic gallidermin

Lantibiotics, a group of lanthionine-containing peptides, display their antibiotic activity by combining different killing mechanisms within one molecule. The prototype lantibiotic nisin was shown to possess both inhibition of peptidoglycan synthesis and pore formation in bacterial membranes by interacting with lipid II. Gallidermin, which shares the lipid II binding motif with nisin but has a shorter molecular length, differed from nisin in pore formation in several strains of bacteria. To simulate the mode of action, we applied cyclic voltammetry and quartz crystal microbalance to correlate pore formation with lipid II binding kinetics of gallidermin in model membranes. The inability of gallidermin to form pores in DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine) (C18/1) and DPoPC (1,2-dipalmitoleoyl-sn-glycero-3-phosphocholine) (C16/1) membranes was related to the membrane thickness. For a better simulation of bacterial membrane characteristics, two different phospholipids with branched fatty acids were incorporated into the DPoPC matrix. Phospholipids with methyl branches in the middle of the fatty acid chains favored a lipid II-independent DPoPC permeabilization by gallidermin, while long-branched phospholipids in which the branch is placed near the hydrophilic region induced an identical lipid II-dependent pore formation of gallidermin and nisin. Obviously, the branched lipids altered lipid packing and reduced the membrane thickness. Therefore, the duality of gallidermin activity (pore formation and inhibition of the cell wall synthesis) seems to be balanced by the bacterial membrane composition.

Surface acoustic wave biosensor as a tool to study the interaction of antimicrobial peptides with phospholipid and lipopolysaccharide model membranes

Surface acoustic wave biosensors are a powerful tool for the study of biomolecular interactions. The modulation of a surface-confined acoustic wave is utilized here for the analysis of surface binding. Phase and amplitude of the wave correspond roughly to mass loading and viscoelastic properties of the surface, respectively. We established a procedure to reconstitute phospholipid and lipopolysaccharide bilayers on the surface of a modified gold sensor chip to study the mode of action of membrane-active peptides. The procedure included the formation of a self-assembled monolayer of 11-mercaptoundecanol, covalent coupling of carboxymethyl-dextran, and subsequent coating with a poly- l-lysine layer. The lipid coverage of the surface is highly reproducible and homogeneous as demonstrated in atomic force micrographs. Ethanol/triton treatment removed the lipids completely, which provided the basis for continuous sequences of independent experiments. The setup was applied to investigate the binding of human cathelicidin-derived peptide LL32, as an example for antimicrobial peptides, to immobilized phosphatidylserine membranes. The peptide-membrane interaction results in a positive phase shift and an increase in amplitude, indicating a mass increase along with a loss in viscosity. This suggests that the bilayer becomes more rigid upon interaction with LL32.

Approaches to the discovery of new antibacterial agents based on bacteriocins

The development of antibiotic resistance in pathogenic bacteria has led to a search for novel classes of antimicrobial drugs. Bacteriocins are peptides that are naturally produced by bacteria and have considerable potential to fulfill the need for more effective bacteriocidal agents. In this mini-review, we describe research aimed at generating analogues of bacteriocins from lactic acid bacteria, with the goal of gaining a better understanding of structure-activity relationships in these peptides. In particular, we report recent findings on synthetic analogues of leucocin A, pediocin PA1, and lacticin 3147 A2, as well as on the significance of these results for the design and production of new antibiotics.

Biosensor-based evaluation of liposomal behavior in the target binding process

In this study we evaluated the quartz crystal microbalance (QCM) as a biosensor for a real-time investigation of liposomal binding, under dynamic flow conditions, onto target proteins immobilized at the sensor. The mass-sensitive frequency changes of quartz sensors allow for a quantification of the liposomal binding process. Furthermore, simultaneous damping analysis gives an insight into liposomal behavior, such as the degree of liposomal deformation or spreading at the target surface. In this study a series of liposomes was evaluated, differing in the kind and concentration of ligands interacting with appropriate target proteins. It became evident that an increase in homing device concentration accelerated deformation and flattening of liposomes, triggering a fusion process. Furthermore, liposomal deformation corresponded with the binding affinity of target molecules, comparing biotin/avidin with E-selectin/ligand interactions. Deformation could be emphasized using dioleoylphosphatidylethanolamine (DOPE) as a fusiogenic membrane component, while sterical stabilization by polyethylenglycol (PEG-PE) appeared in a low degree of deformation. Consequently, the online detection of liposomal target binding by QCM is an excellent facility to control and predict the liposomal behavior at the target site for increasing therapeutic potency.