Role of transmembrane segment M8 in the biogenesis and function of yeast plasma-membrane H(+)-ATPase

Structure, function and biogenesis of the fungal proton pump Pma1

The fungal plasma membrane proton pump Pma1 is an integral plasma membrane protein of the P-type ATPase family. It is an essential enzyme responsible for maintaining a constant cytosolic pH and for energising the plasma membrane to secondary transport processes. Due to its importance for fungal survival and absence from animals, Pma1 is also a highly sought-after drug target. Until recently, its characterisation has been limited to functional, mutational and localisation studies, due to a lack of high-resolution structural information. The determination of three cryo-EM structures of Pma1 in its unique hexameric state offers a new level of understanding the molecular mechanisms underlying the protein's stability, regulated activity and druggability. In light of this context, this article aims to review what we currently know about the structure, function and biogenesis of fungal Pma1.

Point mutations in the different domains of the Saccharomyces cerevisiae plasma membrane PMA1 ATPase cause redistribution among fractions of inorganic polyphosphates

Both ATP and inorganic polyphosphates (PolyP) appeared to be involved in the yeast energy homeostasis, in which plasma membrane PMA1 H⁺-АТРase plays one of the key roles. During biogenesis and functioning, the enzyme undergoes structural and regulatory phosphorylation. Aim of the work was to elucidate interconnection between functioning of the yeast PMA1 H⁺-АТРase carrying point substitutions that affected the enzyme structure-function relationship and its ability to be phosphorylated and PolyP metabolism. Effect of such replacements of phosphorylable and non-phosphorylable residues in three topologically and functionally different domains of the enzyme - membrane, extracytosolic, and C-terminal - on the metabolism of polyphosphates and distribution between short-, mid-, and long-chained PolyP fractions (PolyP1-PolyP4-5) has been studied. АТРase activity of membrane and most extracytosolic strains was noticeably lower comparing to the wild type. Of these mutants, three substitutions (L801A, E803A, E847A) have not caused significant changes in PolyP content regardless up to twofold drop of the ATPase activity; F796A with four-fold decreased activity has led to noticeable increase of mid-chained PolyP fractions. The most pronounced effect of PolyP redistribution was caused either by removal of potential (S846A, T850A, D851A) or established (S911A) phosphosites in the PMA1 ATPase or by altering type of the established phosphosite (S911D, T912D). Patterns of PolyP fractions for these two groups have significantly differed from each other, occurring in opposite directions for mutants with removed and changed phosphosite. Changing residue of phosphosite without altering its type (T850S) has not led to significant changes in PolyP content.Communicated by Ramaswamy H. Sarma.

Functioning of Yeast Pma1 H+-ATPase under Changing Charge: Role of Asp739 and Arg811 Residues

The plasma membrane Pma1 H+-ATPase of the yeast Saccharomyces cerevisiae contains conserved residue Asp739 located at the interface of transmembrane segment M6 and the cytosol. Its replacement by Asn or Val (Petrov et al. (2000) J. Biol. Chem., 275, 15709-15716) or by Ala (Miranda et al. (2011) Biochim. Biophys. Acta, 1808, 1781-1789) caused complete blockage of biogenesis of the enzyme, which did not reach secretory vesicles. It was proposed that a strong ionic bond (salt bridge) could be formed between this residue and positively charged residue(s) in close proximity, and the replacement D739A disrupted this bond. Based on a 3D homology model of the enzyme, it was suggested that the conserved Arg811 located in close proximity to Asp739 could be such stabilizing residue. To test this suggestion, single mutants with substituted Asp739 (D739V, D739N, D739A, and D739R) and Arg811 (R811L, R811M, R811A, and R811D) as well as double mutants carrying charge-neutralizing (D739A/R811A) or charge-swapping (D739R/R811D) substitutions were used. Expression of ATPases with single substitutions R811A and R811D were 38-63%, and their activities were 29-30% of the wild type level; ATP hydrolysis and H+ transport in these enzymes were essentially uncoupled. For the other substitutions including the double mutations, the biogenesis of the enzyme was practically blocked. These data confirm the important role of Asp739 and Arg811 residues for the biogenesis and function of the enzyme, suggesting their importance for defining H+ transport determinants but ruling out, however, the existence of a strong ionic bond (salt bridge) between these two residues and/or importance of such bridge for structure-function relationships in Pma1 H+-ATPase.

[Effect of point substitutions of Asp-714 and Asp-720 residues on the structure and function of the H+ -ATPase of the yeast plasma membrane]

Membrane-spanning M5 and M6 segments, which play a role in the formation of cation transport sites in H(+)-, Ca2(+)-, K(+)-, Na(+)-, and other P2-ATPases, are connected by a short extracytoplasmic loop. In the yeast plasma membrane H(+)-ATPase, which belongs to a family of P2-ATPases, the loop is connected to M5 and M6 through the Asp-714 and Asp-720 residues. In this work, the effect of point amino, acidreplacements of Asp-714 and Asp-720 by Ala, Val, Asn, and Glu residues on the function of the enzyme was studied. The Asp714Asn point mutant possessed activities similar to those of the wild-type enzyme, whereas the replacement of Asp-714 by other amino acid residues disrupted biogenesis and led to a loss of activity. All mutants with substitution of Asp-720 were expressed and possessed relatively high activity. The D720V mutant displayed significantly reduced expression levels, activity, H+ transport, and ATP hydrolyzing activity. Thus, substitutions of Asp-714, except for the D714N mutant, led to significant defects in biogenesis and/or function of the enzyme. The results indicate the important role for the Asp-714 residue in biogenesis, structure stability, and enzyme function.

Role of loop L5-6 connecting transmembrane segments M5 and M6 in biogenesis and functioning of yeast Pma1 H+-ATPase

The L5-6 loop is a short extracytoplasmic stretch (714-DNSLDID) connecting transmembrane segments M5 and M6 and forming along with segments M4 and M8 the core through which cations are transported by H+-, Ca2+-, K+,Na+-, H+,K+-, and other P2-ATPases. To study structure-function relationships within this loop of the yeast plasma membrane Pma1 H+-ATPase, alanine- and cysteine-scanning mutagenesis has been employed. Ala and Cys substitutions for the most conserved residue (Leu717) led to complete block in biogenesis preventing the enzyme from reaching secretory vesicles. The Ala replacement at Asp714 led to five-fold decrease in the mutant expression and loss of its activity, while the Cys substitution blocked biogenesis completely. Replacements of other residues did not lead to loss of enzymatic activity. Additional replacements were made for Asp714 and Asp720 (Asp®Asn/Glu). Of the substitutions made at Asp714, only D714N partially restored the mutant enzyme biogenesis and functioning. However, all mutant enzymes with substituted Asp720 were active. The expressed mutants (34-95% of the wild-type level) showed activity high enough (35-108%) to be analyzed in detail. One of the mutants (I719A) had three-fold reduced coupling ratio between ATP hydrolysis and H+ transport; however, the I719C mutation was rather indistinguishable from the wild-type enzyme. Thus, substitutions at two of the seven positions seriously affected biogenesis and/or functioning of the enzyme. Taken together, these results suggest that the M5-M6 loop residues play an important role in protein stability and function, and they are probably responsible for proper arrangement of transmembrane segments M5 and M6 and other domains of the enzyme. This might also be important for the regulation of the enzyme.

Point mutations in the extracytosolic loop between transmembrane segments M5 and M6 of the yeast Pma1 H+-ATPase: alanine-scanning mutagenesis

Membrane-spanning segments M4, M5, M6, and M8 of the H(+)-, Ca(2+)-, and K(+), Na(+)-ATPases, which belong to the P2-type pumps are the core through which cations are transported. M5 and M6 loop is a short extracytoplasmic stretch of the seven amino acid residues (714-DNSLDID) connecting two of these segments, M5 and M6, where residues involved in the formation of the proton-binding site(s) are located. In the present study, we have used alanine-scanning mutagenesis to explore the structural and functional relationships within this loop of the yeast plasma membrane Pma1 H(+)-ATPase. Of the 7 Ala mutants made, substitution for the most conserved residue (Leu-717) has led to a severe misfolding and complete block in biogenesis of the mutant enzyme. The replacement of Asp-714 has also caused misfolding leading to significant decrease in the expression of the mutant and loss of activity. The remaining mutants were expressed in secretory vesicles at 21-119% of the wild-type level and were active enough to be analyzed in detail. One of these mutants (I719A) showed five- to threefold decrease in both expression and ATP hydrolyzing and H(+) pumping activities and also threefold reduction in the coupling ratio between ATP hydrolysis and H(+) transport. Thus, Ala substitutions at three positions of the seven seriously affected biogenesis, folding, stability and/or functioning of the enzyme. Taken together, these results lead to suggestion that M5 and M6 loop play an important role in the protein stability and function and is responsible for proper arrangement of transmembrane segments M5 and M6 and probably other domains of the enzyme. Results for additional conserved substitutions (Asn and Glu) at Asp-714 and Asp-720 confirmed this suggestion.

In vivo analysis of Saccharomyces cerevisiae plasma membrane ATPase Pma1p isoforms with increased in vitro H+/ATP stoichiometry

Plasma membrane H⁺-ATPase isoforms with increased H⁺/ATP ratios represent a desirable asset in yeast metabolic engineering. In vivo proton coupling of two previously reported Pma1p isoforms (Ser800Ala, Glu803Gln) with increased in vitro H⁺/ATP stoichiometries was analysed by measuring biomass yields of anaerobic maltose-limited chemostat cultures expressing only the different PMA1 alleles. In vivo H⁺/ATP stoichiometries of wildtype Pma1p and the two isoforms did not differ significantly.

Energy coupling in Saccharomyces cerevisiae: selected opportunities for metabolic engineering

Free-energy (ATP) conservation during product formation is crucial for the maximum product yield that can be obtained, but often overlooked in metabolic engineering strategies. Product pathways that do not yield ATP or even demand input of free energy (ATP) require an additional pathway to supply the ATP needed for product formation, cellular maintenance, and/or growth. On the other hand, product pathways with a high ATP yield may result in excess biomass formation at the expense of the product yield. This mini-review discusses the importance of the ATP yield for product formation and presents several opportunities for engineering free-energy (ATP) conservation, with a focus on sugar-based product formation by Saccharomyces cerevisiae. These engineering opportunities are not limited to the metabolic flexibility within S. cerevisiae itself, but also expression of heterologous reactions will be taken into account. As such, the diversity in microbial sugar uptake and phosphorylation mechanisms, carboxylation reactions, product export, and the flexibility of oxidative phosphorylation via the respiratory chain and H(+) -ATP synthase can be used to increase or decrease free-energy (ATP) conservation. For product pathways with a negative, zero or too high ATP yield, analysis and metabolic engineering of the ATP yield of product formation will provide a promising strategy to increase the product yield and simplify process conditions.

Structure-function relationships in membrane segment 6 of the yeast plasma membrane Pma1 H(+)-ATPase

The crystal structures of the Ca(2+)- and H(+)-ATPases shed light into the membrane embedded domains involved in binding and ion translocation. Consistent with site-directed mutagenesis, these structures provided additional evidence that membrane-spanning segments M4, M5, M6 and M8 are the core through which cations are pumped. In the present study, we have used alanine/serine scanning mutagenesis to study the structure-function relationships within M6 (Leu-721-Pro-742) of the yeast plasma membrane ATPase. Of the 22 mutants expressed and analyzed in secretory vesicles, alanine substitutions at two well conserved residues (Asp-730 and Asp-739) led to a complete block in biogenesis; in the mammalian P-ATPases, residues corresponding to Asp-730 are part of the cation-binding domain. Two other mutants (V723A and I736A) displayed a dramatic 20-fold increase in the IC(50) for inorganic orthovanadate compared to the wild-type control, accompanied by a significant reduction in the K(m) for Mg-ATP, and an alkaline shift in the pH optimum for ATP hydrolysis. This behavior is apparently due to a shift in equilibrium from the E(2) conformation of the ATPase towards the E(1) conformation. By contrast, the most striking mutants lying toward the extracellular side in a helical structure (L721A, I722A, F724A, I725A, I727A and F728A) were expressed in secretory vesicles but had a severe reduction of ATPase activity. Moreover, all of these mutants but one (F728A) were unable to support yeast growth when the wild-type chromosomal PMA1 gene was replaced by the mutant allele. Surprisingly, in contrast to M8 where mutations S800A and E803Q (Guerra et al., Biochim. Biophys. Acta 1768: 2383-2392, 2007) led to a dramatic increase in the apparent stoichiometry of H(+) transport, three substitutions (A726S, A732S and T733A) in M6 showed a reduction in the apparent coupling ratio. Taken together, these results suggest that M6 residues play an important role in protein stability and function, and probably are responsible for cation binding and stoichiometry of ion transport as suggested by homology modeling.

Facilitative plasma membrane transporters function during ER transit

Although biochemical studies suggested a high permeability of the endoplasmic reticulum (ER) membrane for small molecules, proteomics identified few specialized ER transporters. To test functionality of transporters during ER passage, we tested whether glucose transporters (GLUTs, SGLTs) destined for the plasma membrane are active during ER transit. HepG2 cells were characterized by low-affinity ER transport activity, suggesting that ER uptake is protein mediated. The much-reduced capacity of HEK293T cells to take up glucose across the plasma membrane correlated with low ER transport. Ectopic expression of GLUT1, -2, -4, or -9 induced GLUT isoform-specific ER transport activity in HEK293T cells. In contrast, the Na(+)-glucose cotransporter SGLT1 mediated efficient plasma membrane glucose transport but no detectable ER uptake, probably because of lack of a sufficient sodium gradient across the ER membrane. In conclusion, we demonstrate that GLUTs are sufficient for mediating ER glucose transport en route to the plasma membrane. Because of the low volume of the ER, trace amounts of these uniporters contribute to ER solute import during ER transit, while uniporters and cation-coupled transporters carry out export from the ER, together potentially explaining the low selectivity of ER transport. Expression levels and residence time of transporters in the ER, as well as their coupling mechanisms, could be key determinants of ER permeability.

Functioning of Saccharomyces cerevisiae Pma1 H+-ATPase carrying the minimal number of cysteine residues

Pma1 H+-ATPase is the primary proton pump in the plasma membrane of the yeast Saccharomyces cerevisiae. It generates an electrochemical proton gradient, thus providing energy for secondary solute transport systems. The enzyme contains nine cysteines, three (Cys148, Cys312, and Cys867) in transmembrane segments and the rest (Cys221, Cys376, Cys409, Cys472, Cys532, and Cys569) in the cytosolic parts of the molecule. Although individually they are not essential for the functioning of the ATPase, substitution of all of them leads to the loss of enzyme activity and impairment of biogenesis. By means of site-directed mutagenesis combined with other molecular-biological and biochemical methods, this work defines different combinations of minimal cysteine content that are consistent with ATPase function.