Two distinct mechanisms of vesicle-to-micelle and micelle-to-vesicle transition are mediated by the packing parameter of phospholipid-detergent systems

Liposome bilayer stability: emphasis on cholesterol and its alternatives

Liposomes are spherical lipidic nanocarriers composed of natural or synthetic phospholipids with a hydrophobic bilayer and aqueous core, which are arranged into a polar head and a long hydrophobic tail, forming an amphipathic nano/micro-particle. Despite numerous liposomal applications, their use encounters many challenges related to the physicochemical properties strongly affected by their constituents, colloidal stability, and interactions with the biological environment. This review aims to provide a perspective and a clear idea about the main factors that regulate the liposomes' colloidal and bilayer stability, emphasising the roles of cholesterol and its possible alternatives. Moreover, this review will analyse strategies that offer possible approaches to provide more stable in vitro and in vivo liposomes with enhanced drug release and encapsulation efficiencies.

Vesicle budding caused by lysolipid-induced asymmetry stress

Lysolipids such as lauroyl, myristoyl, and palmitoyl lysophosphatidylcholine (LPC) insert into the outer leaflet of liposomes but do not flip to the inner leaflet over many hours. This way, they create asymmetry stress between the intrinsic areas of the two leaflets. We have studied how this stress is relaxed with particular emphasis on the budding and fission of small (diameter 20-30 nm) daughter vesicles (DVs). Asymmetric flow field-flow fractionation was utilized to quantify the extent of budding from large unilamellar vesicles after exposure to LPC. Budding starts at a low threshold of the order of 2 mol% LPC in the outer (and ≈0 mol% LPC in the inner) leaflet. We see reason to assume that the fractional fluorescence intensity from DVs is a good approximation for the fraction of membrane lipid, POPC, transferred into DVs. Accordingly, budding starts with a "budding power" of ≈6 POPC molecules budding off per LPC added, corresponding to a more than 10-fold accumulation of LPC in the outer leaflet of DVs to ≈24 mol%. As long as budding is possible, little strain is built up in the membranes, a claim supported by the lack of changes in limiting fluorescence anisotropy, rotational correlation time, and fluorescence lifetime of symmetrically and asymmetrically inserted TMA-DPH. At physiological osmolarity, budding is typically limited to 20-30% of budded fraction with some batch-to-batch variation, but independent of the LPC species. We hypothesize that the budding limit is determined by the excess area of the liposomes upon preparation, which is then used up upon budding given the larger area-to-volume ratio of smaller liposomes. As the mother vesicles approach ideal spheres, budding must stop. This is qualitatively supported by increased and decreased budding limits of osmotically predeflated and preinflated vesicles, respectively.

Pathways of Membrane Solubilization: A Structural Study of Model Lipid Vesicles Exposed to Classical Detergents

Understanding the pathways of solubilization of lipid membranes is of high importance for their use in biotechnology and industrial applications. Although lipid vesicle solubilization by classical detergents has been widely investigated, there are few systematic structural and kinetic studies where different detergents are compared under varying conditions. This study used small-angle X-ray scattering to determine the structures of lipid/detergent aggregates at different ratios and temperatures and studied the solubilization in time using the stopped-flow technique. Membranes composed of either of two zwitterionic lipids, DMPC or DPPC, and their interactions with three different detergents, sodium dodecyl sulfate (SDS), n-dodecyl-beta-maltoside (DDM), and Triton X-100 (TX-100), were tested. The detergent TX-100 can cause the formation of collapsed vesicles with a rippled bilayer structure that is highly resistant to TX-100 insertion at low temperatures, while at higher temperatures, it partitions and leads to the restructuring of vesicles. DDM also causes this restructuring into multilamellar structures at subsolubilizing concentrations. In contrast, partitioning of SDS does not alter the vesicle structure below the saturation limit. Solubilization is more efficient in the gel phase for TX-100 but only if the cohesive energy of the bilayer does not prevent sufficient partitioning of the detergent. DDM and SDS show less temperature dependence compared to TX-100. Kinetic measurements reveal that solubilization of DPPC largely occurs through a slow extraction of lipids, whereas DMPC solubilization is dominated by fast and burst-like solubilization of the vesicles. The final structures obtained seem to preferentially be discoidal micelles where the detergent can distribute in excess along the rim of the disc, although we do observe the formation of worm- and rodlike micelles in the case of solubilization of DDM. Our results are in line with the suggested theory that bilayer rigidity is the main factor influencing which aggregate is formed.

Beyond the standard model of solubilization: Non-ionic surfactants induce collapse of lipid vesicles into rippled bilamellar nanodiscs

HYPOTHESIS

Although solubilization of lipid membranes has been studied extensively, questions remain regarding the structural pathways and metastable structures involved. This study investigated whether the non-ionic detergent Triton X-100 follows the classical solubilization pathway or if intermediate nanostructures are formed.

EXPERIMENTS

Small angle X-ray and neutron scattering (SAXS/SANS) was used in combination with transmission electron cryo-microscopy and cryo-tomography to deduce the structure of mixtures of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) vesicles and Triton X-100. Time-resolved SAXS and dynamic light scattering were used to investigate the kinetics of the process.

FINDINGS

Upon addition of moderate detergent amounts at low temperatures, the lipid vesicles implode into ordered rippled bilamellar disc structures. The bilayers arrange in a ripple phase to accommodate packing constraints caused by inserted TX-100 molecules. The collapse is suggested to occur through a combination of water structure destabilization by detergents flipping across the membrane and osmotic pressure causing interbilayer attraction internally. The subsequently induced ripples then stabilize the aggregates and prevent solubilization, supported by the observation that negatively charged vesicles undergo a different pathway upon TX-100 addition, forming large bicelles. The findings demonstrate the richness in assembly pathways of simple lipids and detergents and stimulate considerations for the use of certain detergents in membrane solubilization.

Unveiling growth and dynamics of liposomes by graphene liquid cell-transmission electron microscopy

Liposome is a model system for biotechnological and biomedical purposes spanning from targeted drug delivery to modern vaccine research. Yet, the growth mechanism of liposomes is largely unknown. In this work, the formation and evolution of phosphatidylcholine-based liposomes are studied in real-time by graphene liquid cell-transmission electron microscopy (GLC-TEM). We reveal important steps in the growth, fusion and denaturation of phosphatidylcholine (PC) liposomes. We show that initially complex lipid aggregates resembling micelles start to form. These aggregates randomly merge while capturing water and forming small proto-liposomes. The nanoscopic containers continue sucking water until their membrane becomes convex and free of redundant phospholipids, giving stabilized PC liposomes of different sizes. In the initial stage, proto-liposomes grow at a rate of 10-15 nm s^-1, which is followed by their growth rate of 2-5 nm s^-1, limited by the lipid availability in the solution. Molecular dynamics (MD) simulations are used to understand the structure of micellar clusters, their evolution, and merging. The liposomes are also found to fuse through lipid bilayers docking followed by the formation of a hemifusion diaphragm and fusion pore opening. The liposomes denaturation can be described by initial structural destabilization and deformation of the membrane followed by the leakage of the encapsulated liquid. This study offers new insights on the formation and growth of lipid-based molecular assemblies which is applicable to a wide range of amphiphilic molecules.

Tuning Liposome Stability in Biological Environments and Intracellular Drug Release Kinetics

Ideal drug carriers should be stable in biological environments but eventually release their drug load once inside the targeted cells. These two aspects can be in contrast with each other, thus they need to be carefully tuned in order to achieve the desired properties for specific applications. Quantifying drug release profiles in biological environments or inside cells can be highly challenging, and standard methods to determine drug release kinetics in many cases cannot be applied to complex biological environments or cells. Within this context, the present work combined kinetic studies by flow cytometry with aging experiments in biological fluids and size-exclusion chromatography to determine drug release profiles in biological environments and inside cells. To this purpose, anionic and zwitterionic liposomes were used as model nanomedicines. By changing lipid composition, liposome stability in serum and intracellular release kinetics could be tuned and formulations with very different properties could be obtained. The methods presented can be used to characterize liposome release profiles in complex biological media, as well as inside cells. In this way, liposome composition can be tuned in order to achieve formulations with optimal balance between stability and release kinetics for specific applications.

Temperature and oxidation-sensitive dioleoylphophatidylethanolamine liposome stabilized with poly(ethyleneimine)/(phenylthio)acetic acid ion pair

Temperature and oxidation-sensitive liposomes were prepared by stabilizing dioleoylphosphatidylethanolamine (DOPE) bilayers with the ion pair of poly(ethyleneimine)/(phenylthio)acetic acid (PEI/PTA). An upper critical solution temperature (UCST) behavior was observed when PEI/PTA ion pair was suspended in an aqueous solution. It was observed that the UCST increased with increasing PTA content. The ion pair was self-assembled into nanospheres owing to its amphiphilic property which was confirmed by transmission electron microscopy. The FT-IR spectroscopic spectrum showed that the ion pair formed a salt bridge between the amino group and the carboxyl group and the PTA content in the ion pair was readily oxidized by H₂O₂. Further, DOPE liposomal membranes could be stabilized with PEI/PTA ion pair. Due to the amphiphilic property, the ion pair played a role as a stabilizer for the formation of DOPE liposomes. The liposome released its payload in a temperature-responsive manner, possibly because when the temperature is raised, the ion pair loses its amphiphilic property and can be detached from the liposomal membrane. The liposome was also oxidation-responsive in terms of release, possibly because the amphiphilic property of the ion pair disappears when the PTA is oxidized.

Intrinsic Fluorescence in Peptide Amphiphile Micelles with Protein-Inspired Phosphate Sensing

Although peptide amphiphile micelles (PAMs) have been widely studied since they were developed in the late 1990s, to the author’s knowledge, there have been no reports that PAMs intrinsically fluoresce without a fluorescent tag, according to the aggregation-induced emission (AIE) effect. This unexpected fluorescence behavior adds noteworthy value to both the peptide amphiphile and AIE communities. For PAMs, intrinsic fluorescence becomes another highly useful feature to add to this well-studied material platform that features precise synthetic control, tunable self-assembly, and straightforward functionalization, with clear potential applications in bioinspired materials for bioimaging and fluorescent sensing. For AIE, it is extremely rare and highly desirable for one platform to exhibit precise tunability on multiple length scales in aqeuous solutions, positioning PAMs as uniquely well-suited for systematic AIE mechanistic study and sequence-specific functionalization for bioinspired AIE applications. In this work, the author proposes that AIE occurs across intermolecular emissive pathways created by the closely packed peptide amide bonds in the micelle corona upon self-assembly, with maximum excitation and emission wavelengths of 355 and 430 nm, respectively. Of the three PAMs evaluated here, the PAM with tightly packed random coil peptide conformation and maximum peptide length had the largest quantum yield, indicating that tuning molecular design can further optimize the intrinsic emissive properties of PAMs. To probe the sensing capabilities of AIE PAMs, a PAM was designed to incorporate a protein-derived phosphate-binding sequence. It detected phosphate down to 1 ppm through AIE-enhanced second-order aggregation, demonstrating that AIE in PAMs leverages tunable biomimicry to perform protein-inspired sensing.

Enhanced delivery to brain using sonosensitive liposome and microbubble with focused ultrasound

Glioblastoma is considered one of the most aggressive and dangerous brain tumors. However, treatment of GBM has been still challenged due to blood-brain barrier (BBB). BBB prevents that the chemotherapeutic molecules are extravasated to brain. In this study, sonosensitive liposome encapsulating doxorubicin (DOX) was developed for enhancement of GBM penetration in combination with focused ultrasound (FUS) and microbubbles. Upon ultrasound (US) irradiation, microbubbles induce cavitation resulting in the tight junction of BBB endothelium to temporarily open. In addition, the composition of sonosensitive liposome was optimized by comparison of sonosensitivity and intracellular uptake to U87MG cells. The optimal sonosensitive liposome, IMP301-DC, resulted 123.9 ± 38.2 nm in size distribution and 98.2 % in loading efficiency. Related to sonosensitivity of IMP301-DC, US-triggered release ratio of doxorubicin was 69.2 ± 12.3 % at 92 W/cm² of US intensity for 1 min. In the in vivo experiments, the accumulation of DiD fluorescence probe labeled IMP301-DC-shell in the brain through the BBB opening was increased more than two-fold compared to that of Doxil-shell, non-sonosensitive liposome. US exposure significantly increased GBM cytotoxicity of IMP301-DC. In conclusion, this study demonstrated that IMP301-DC could serve as an alternative solution to enhance the penetration to GBM treatment via BBB opening by non-invasive FUS combined with microbubbles.

Confinement-Induced Fabrication of Liquid Crystalline Polymeric Fibers

In aqueous media, liquid crystalline droplets typically form spherical shapes in order to minimize surface energy. Recently, non-spherical geometry has been reported using molecular self-assembly of surfactant-stabilized liquid crystalline oligomers, resulting in branched and randomly oriented filamentous networks. In this study, we report a polymerization of liquid crystalline polymeric fibers within a micro-mold. When liquid crystal oligomers are polymerized in freely suspended aqueous media, curvilinear and randomly networked filaments are obtained. When reactive liquid crystalline monomers are oligomerized in a micro-channel, however, highly aligned linear fibers are polymerized. Within a top-down microfabricated mold, a bottom-up molecular assembly was successfully achieved in a controlled manner by micro-confinement, suggesting a unique opportunity for the programming architecture of materials via a hybrid approach.

High-Resolution Magic Angle Spinning NMR of KcsA in Liposomes: The Highly Mobile C-Terminus

The structure of the transmembrane domain of the pH-activated bacterial potassium channel KcsA has been extensively characterized, yet little information is available on the structure of its cytosolic, functionally critical N- and C-termini. This study presents high-resolution magic angle spinning (HR-MAS) and fractional deuteration as tools to study these poorly resolved regions for proteoliposome-embedded KcsA. Using ¹H-detected HR-MAS NMR, we show that the C-terminus transitions from a rigid structure to a more dynamic structure as the solution is rendered acidic. We make previously unreported assignments of residues in the C-terminus of lipid-embedded channels. These data agree with functional models of the C-terminus-stabilizing KcsA tetramers at a neutral pH with decreased stabilization effects at acidic pH. We present evidence that a C-terminal truncation mutation has a destabilizing effect on the KcsA selectivity filter. Finally, we show evidence of hydrolysis of lipids in proteoliposome samples during typical experimental timeframes.

Motile behaviour of droplets in lipid systems

Motility is the capacity for living organisms to move autonomously and with purpose, and is essential to life. The transition from abiotic chemistry into motile cellular compartments has yet to be understood, but motile behaviour likely followed chemical evolution because primeval cell survival depended on scouting for resources effectively. Minimalistic motile systems provide an experimental framework to delineate the emergence mechanisms of such an evolutionary asset. In this Review, we discuss frontier developments in controlling the movement of droplets in lipid systems, in particular, chemotactic behaviours driven by fluctuations in interfacial tension, because of its simple mechanism and prebiotic relevance. Although most efforts have focused on designing oil droplet motility in lipid-rich aqueous solutions, we highlight that water droplets can also move in lipid-enriched oils. First, we describe how droplets evolve chemotactic motility in lipid systems. Next, we review how these oil droplets can adapt their movement to illumination conditions. Finally, we discuss examples where chemical reactivity brings complexity to motility. This work contributes to systems chemistry, where chemical reactions combined with physicochemical phenomena can yield new functions, such that a limited set of molecules can promote complex movement at larger functional scales by following the rules of molecular chemistry.

Enhanced Skin Permeation of Punicalagin after Topical Application of Pluronic Micelles or Vesicles Loaded with Lafoensia pacari Extract

Punicalagin, the principal ellagitannin of Lafoensia pacari leaves, has proven antioxidant activity, and standardized extracts of L. pacari can be topically used for skin aging management. We hypothesized that Pluronic nanomicelles or vesicles could solubilize sufficiently large amounts of the standardized extracts of L. pacari and provide chemical stability to punicalagin. The standardized extracts of L. pacari were obtained with an optimized extraction procedure, and the antioxidant activity was characterized. Formulations containing Pluronic at 25% and 35% were obtained with or without Span 80. They were characterized by average diameter, polydispersity index, punicalagin content, physicochemical stability, and rheology. A release and skin permeation study was carried out in vertical diffusion cells. The extraction procedure allowed quantifying high punicalagin content (i.e., 141.61 ± 3.87 mg/g). The standardized extracts of L. pacari showed antioxidant activity for all evaluated methods. Pluronic at 25 and Pluronic at 35 with standardized extracts of L. pacari showed an average diameter of about 25 nm. The addition of Span 80 significantly increased the mean diameter by 15-fold (p < 0.05), indicating the spontaneous formation of vesicles. Pluronic formulations significantly protected punicalagin from chemical degradation (p < 0.05). Pluronic at 25 formulations presented as free-flowing liquid-like systems, while Pluronic at 35 resulted in an increase of about 44-fold in |ƞ*|. The addition of Span 80 significantly reduced the Pluronic sol-gel transition temperature (p < 0.05), indicating the formation of vesicles. Formulations with Span 80 significantly enhanced punicalagin skin permeation compared to formulations without Span 80 (p < 0.05). Formulations with Span 80 were demonstrated to be the most promising formulations, as they allowed significant permeation of punicalagin (about 80 to 315 µg/cm²), which has been shown to have antioxidant activity.

Lecithins: A comprehensive review of their properties and their use in formulating microemulsions

Lecithins are a phospholipid-rich mixture recovered from the degumming process of crude vegetable oils. Since the nineteenth century, this by-product of oil processing has been used as a food and pharmaceutical ingredient. Lecithins' popularity as an ingredient in the pharmaceutical and food industries arises from their particular properties, such as their hydrophilic-lipophilic balance, critical micellar concentration, and assembly properties. However, there is limited knowledge of the use of lecithins to formulate pharmaceutical- and food-grade microemulsions. Unlike conventional emulsions, microemulsions are thermodynamically stable systems that offer long-term stability. Besides, microemulsions show nano-sized droplets, transparency, ease of preparation and scale-up, and do not require expensive equipment. This review aims to provide a comprehensive overview of lecithins, their properties, and their use in formulating microemulsions, a promising method to incorporate, protect, and deliver bioactive compounds in pharmaceutical and food products. PRACTICAL APPLICATIONS: Lecithins are a phospholipid-rich mixture recovered from the degumming process of crude vegetable oils. Since the nineteenth century, this by-product of oil processing has been used as a food ingredient. Lecithin phospholipids are commonly used as emulsifier agents in the food and pharmaceutical industries because of their particular properties. However, there is limited knowledge of the use of lecithins to formulate pharmaceutical- or food-grade microemulsions. Unlike conventional emulsions, microemulsions are stable systems that offer long-term stability, nano-sized droplets, transparency, ease of preparation and scale-up, and do not require expensive equipment. This review aims to provide a comprehensive overview of lecithins, their properties, and their use in formulating microemulsions, a promising method to incorporate, protect, and deliver bioactive compounds such as vitamins, flavors, antioxidants, nutrients, colors, antimicrobials, and polyphenols.

Transformation of Lipid Vesicles into Micelles by Adding Nonionic Surfactants: Elucidating the Structural Pathway and the Intermediate Structures

The phospholipid lecithin (L) and the nonionic surfactant Tween 80 (T) are used together in various contexts, including in drug delivery and oil spill remediation. There is hence a need to elucidate the nanostructures in LT mixtures, which is the focus of this paper. We study these mixtures using cryogenic transmission electron microscopy (cryo-TEM), coupled with dynamic light scattering and small-angle neutron scattering. As the concentration of Tween 80 is increased, the vesicles formed by lecithin are transformed into spherical micelles. We identify bicelles (i.e., disc-like micelles) as well as cylindrical micelles as the key stable nanostructures formed at intermediate L/T ratios. The bicelles have diameters ∼13–26 nm, and the bicelle size decreases as the Tween 80 content increases. We propose that the lecithin lipids form the body of the discs, while the Tween 80 surfactants occupy the rims. This hypothesis is consistent with geometric arguments because lecithin is double-tailed and favors minimal curvature, whereas the single-tailed Tween 80 molecules prefer curved interfaces. In the case of cylindrical micelles, cryo-TEM reveals that the micelles are short (length < 22 nm) and flexible. We are able to directly visualize the microstructure of the aggregates formed by lecithin–Tween 80 mixtures, thereby enhancing the understanding of morphological changes in the lecithin–Tween 80 system.

Simple Thermodynamic Description of the Micellar-Bilayer State Transition of Assemblies Composed of n-Octyl-β-D-glucopyranoside and 1,2-Dioleolyl-sn-glycero-3-phosphocholine Dispersed in Aqueous Media or Supported on Solid Substrates

In the preceding paper, we investigated a mixed assembly composed of a nonionic surfactant, n-octyl-β-D-glucopyranoside (OG), and an amphoteric lipid, 1,2-dioleolyl-sn-glycero-3-phosphocholine (DOPC), formed on hydrophilized solid substrates immersed in aqueous solutions containing OG and DOPC. The experimental data could be interpreted in terms of the phase equilibrium; thus, the partition equilibrium profile of OG between the bulk solution phase and the supported assembly phase was obtained, as well as that between the bulk solution and the dispersed assembly. The partition equilibrium profiles suggested that micellar-bilayer state transitions occur both in the supported assembly and in the dispersed one in a roughly synchronized manner, even though there are significant discrepancies between them. In this paper, we propose a simple thermodynamic model for the micellar-bilayer transition of the dispersed and supported assembly of OG and DOPC, assuming that the micellar and bilayer states are also pseudo-phases distinct from each other. Using this model, we analyzed these partition equilibrium profiles and concluded that the transition in the supported assembly should mainly be attributed to the transition in the dispersed assembly, which is partly modified by the interaction energy between the supported assembly and the substrate.

Mechanisms of Formation, Structure, and Dynamics of Lipoprotein Discs Stabilized by Amphiphilic Copolymers: A Comprehensive Review

Amphiphilic copolymers consisting of alternating hydrophilic and hydrophobic units account for a major recent methodical breakthrough in the investigations of membrane proteins. Styrene–maleic acid (SMA), diisobutylene–maleic acid (DIBMA), and related copolymers have been shown to extract membrane proteins directly from lipid membranes without the need for classical detergents. Within the particular experimental setup, they form disc-shaped nanoparticles with a narrow size distribution, which serve as a suitable platform for diverse kinds of spectroscopy and other biophysical techniques that require relatively small, homogeneous, water-soluble particles of separate membrane proteins in their native lipid environment. In recent years, copolymer-encased nanolipoparticles have been proven as suitable protein carriers for various structural biology applications, including cryo-electron microscopy (cryo-EM), small-angle scattering, and conventional and single-molecule X-ray diffraction experiments. Here, we review the current understanding of how such nanolipoparticles are formed and organized at the molecular level with an emphasis on their chemical diversity and factors affecting their size and solubilization efficiency.

Surfactants - Compounds for inactivation of SARS-CoV-2 and other enveloped viruses

We provide here a general view on the interactions of surfactants with viruses, with a particular emphasis on how such interactions can be controlled and employed for inhibiting the infectivity of enveloped viruses, including coronaviruses. The aim is to provide to interested scientists from different fields, including chemistry, physics, biochemistry, and medicine, an overview of the basic properties of surfactants and (corona)viruses, which are relevant to understanding the interactions between the two. Various types of interactions between surfactant and virus are important, and they act on different components of a virus such as the lipid envelope, membrane (envelope) proteins and nucleocapsid proteins. Accordingly, this cannot be a detailed account of all relevant aspects but instead a summary that bridges between the different disciplines. We describe concepts and cover a selection of the relevant literature as an incentive for diving deeper into the relevant material. Our focus is on more recent developments around the COVID-19 pandemic caused by SARS-CoV-2, applications of surfactants against the virus, and on the potential future use of surfactants for pandemic relief. We also cover the most important aspects of the historical development of using surfactants in combatting virus infections. We conclude that surfactants are already playing very important roles in various directions of defence against viruses, either directly, as in disinfection, or as carrier components of drug delivery systems for prophylaxis or treatment. By designing tailor-made surfactants, and consequently, advanced formulations, one can expect more and more effective use of surfactants, either directly as antiviral compounds or as part of more complex formulations.

Cholesterol-phospholipid interactions resist the detergent effect of bovine bile

Sphingomyelin (SM) and cholesterol complexation gives rise to detergent-resistant liquid-ordered domains. The persistence of these domains and subsequent mixed micelle formation was examined in the presence of bile under physiological digestive in vitro conditions for vesicles comprising either SM/cholesterol, porcine brain phosphatidylcholine (BPC)/cholesterol, or soy phosphatidylcholine (SPC)/cholesterol bilayers, the latter two systems having no liquid-ordered domains. Micellization of these digested phospholipid multilamellar vesicle systems was confirmed by transmission electron microscopy. Bovine bile was found to consist of large multilamellar sheets which subsumed phospholipid vesicles to form aggregated superstructures. Budding off from these superstructures were vesicle-to-micelle transition intermediates: unilamellar vesicles and cylindrical micelles. The presence of cholesterol (60/40 phospholipid/cholesterol mol/mol) delayed the initial rapid onset of digestion, but not for BPC and SPC vesicle systems. Acyl chain order/disorder before and after vesicle-to-micelle transition of all three phospholipid/cholesterol systems was examined using Raman spectroscopy. The addition of bovine bile to both PC/cholesterol vesicle systems reduced the overall ratio of acyl chain disorder to order. In SM/cholesterol vesicles with ≤ 20% mol cholesterol, only the lateral inter-acyl chain packing was reduced, whereas for SM/cholesterol vesicles with ≥ 30% mol cholesterol, a higher proportion of gauche-to-trans isomerization was apparent, demonstrating that SM/cholesterol complexes modify the acyl chain structure of micelles.

Revealing Thermodynamics and Kinetics of Lipid Self-Assembly by Markov State Model Analysis

Self-assembly is ubiquitous in the realm of biology and has become an elegant bottom-up approach to fabricate new materials. Although molecular dynamics (MD) simulations can complement experiments by providing the missing atomic details, it still remains a grand challenge to reveal the thermodynamic and kinetic information on a self-assembly system. In this work, we demonstrate for the first time that the Markov state model analysis can be used to delineate the variation of free energy during the self-assembly process of a typical amphiphilic lipid dipalmitoyl-phosphatidylcholine (DPPC). Free energy profiles against the solvent-accessible surface area and the root-mean-square deviation have been derived from extensive MD results of more than five hundred trajectories, which identified a metastable crossing-cylinder (CC) state and a transition state of the distorted bilayer with a free energy barrier of ∼0.02 kJ mol^-1 per DPPC lipid, clarifying a long-standing speculation for 20 years that there exists a free energy barrier during lipid self-assembly. Our simulations also unearth two mesophase structures at the early stage of self-assembly, discovering two assembling pathways to the CC state that have never been reported before. Further thermodynamic analysis derives the contributions from the enthalpy and the entropy terms to the free energy, demonstrating the critical role played by the enthalpy-entropy compensation. Our strategy opens the door to quantitatively understand the self-assembly processes in general and provides new opportunities for identifying common thermodynamic and kinetic patterns in different self-assembly systems and inspiring new ideas for experiments. It may also contribute to the refinement of force field parameters of various self-assembly systems.

Effect of tetracaine on dynamic reorganization of lipid membranes

To understand the intrinsic influence of a drug on lipid membranes is of critical importance in pharmacological science. Herein, we report fluorescence microscopy analysis of the interaction between the local anesthetic tetracaine (TTC) and planar supported lipid bilayers (SLBs), as model membranes. Our results show that TTC increases lipid chain mobility, destabilizes the SLBs and remarkably induces membrane disruption and solubilization. Upon TTC binding, a local curvature change in the bilayer was observed, which led to the subsequent formation of up to 20-μm-long flexible lipid tubules as well as the formation of micron-size holes. Quantitative analysis revealed that membrane solubilization process can be divided into two distinct different stages as a function of TTC concentration. In the first stage (<800 μM), the bilayer disruption profiles fit well to a Langmuir isotherm, while in the second stage (800 μM-25 mM), TTC solubilizes the membrane in a detergent-like manner. Notably, the onset of membrane solubilization occurred below the critical micelle concentration (cmc) of TTC, indicating a local accumulation of the drug in the membrane. Additionally, cholesterol increases the insertion of TTC into the membrane and thus promotes the solubilization effect of TTC on lipid bilayers. These findings may help to elucidate the possible mechanisms of TTC interaction with lipid membranes, the dose dependent toxicity attributed to local anesthetics, as well as provide valuable information for drug development and modification.

Spontaneous In Situ Formation of Liposomes from Inert Porous Microparticles for Oral Drug Delivery

Despite the wide-spread use of liposomal drug delivery systems, application of these systems for oral purposes is limited due to their large-scale formulation and storage issues. Proliposomes are one of the formulation approaches for achieving solid powders that readily form liposomes upon hydration. In this work, we investigated a dry powder formulation of a model low-soluble drug with phospholipids loaded in porous functionalized calcium carbonate microparticles. We characterized the liposome formation under conditions that mimic the different gastrointestinal stages and studied the factors that influence the dissolution rate of the model drug. The liposomes that formed upon direct contact with the simulated gastric environment had a capacity to directly encapsulate 25% of the drug in situ. The emerged liposomes allowed complete dissolution of the drug within 15 min. We identified a negative correlation between the phospholipid content and the rate of water uptake. This correlation corroborated the results obtained for the rate of dissolution and liposome encapsulation efficiency. This approach allows for the development of solid proliposomal dosage formulations, which can be scaled up with regular processes.

Styrene maleic acid copolymer induces pores in biomembranes

We investigated the interactions between styrene-maleic acid (SMA) copolymers and phospholipid bilayers, using confocal microscopy and surface acoustic wave resonance (SAR) sensing. For the first time we experimentally observed and followed pore formation by SMA copolymers in intact supported bilayers and unilamellar vesicles, showing that fluorescein, a water-soluble organic compound with a mean diameter of 6.9 Å, can traverse the membrane. Our findings are in agreement with recent theoretical predictions, which suggested that SMA copolymers may insert along the plane of the bilayer to form stable toroidal pores.

A synthetic metabolic network for physicochemical homeostasis

One of the grand challenges in chemistry is the construction of functional out-of-equilibrium networks, which are typical of living cells. Building such a system from molecular components requires control over the formation and degradation of the interacting chemicals and homeostasis of the internal physical-chemical conditions. The provision and consumption of ATP lies at the heart of this challenge. Here we report the in vitro construction of a pathway in vesicles for sustained ATP production that is maintained away from equilibrium by control of energy dissipation. We maintain a constant level of ATP with varying load on the system. The pathway enables us to control the transmembrane fluxes of osmolytes and to demonstrate basic physicochemical homeostasis. Our work demonstrates metabolic energy conservation and cell volume regulatory mechanisms in a cell-like system at a level of complexity minimally needed for life.

Functional out-of-equilibrium networks are typical of living cells. Here the authors report the construction of a sustained ATP production system in vesicles with controlled energy dissipation and physicochemical homeostasis.

Unveiling the multi-step solubilization mechanism of sub-micron size vesicles by detergents

The solubilization of membranes by detergents is critical for many technological applications and has become widely used in biochemistry research to induce cell rupture, extract cell constituents, and to purify, reconstitute and crystallize membrane proteins. The thermodynamic details of solubilization have been extensively investigated, but the kinetic aspects remain poorly understood. Here we used a combination of single-vesicle Förster resonance energy transfer (svFRET), fluorescence correlation spectroscopy and quartz-crystal microbalance with dissipation monitoring to access the real-time kinetics and elementary solubilization steps of sub-micron sized vesicles, which are inaccessible by conventional diffraction-limited optical methods. Real-time injection of a non-ionic detergent, Triton X, induced biphasic solubilization kinetics of surface-immobilized vesicles labelled with the Dil/DiD FRET pair. The nanoscale sensitivity accessible by svFRET allowed us to unambiguously assign each kinetic step to distortions of the vesicle structure comprising an initial fast vesicle-swelling event followed by slow lipid loss and micellization. We expect the svFRET platform to be applicable beyond the sub-micron sizes studied here and become a unique tool to unravel the complex kinetics of detergent-lipid interactions.

Robust Microfluidic Technology and New Lipid Composition for Fabrication of Curcumin-Loaded Liposomes: Effect on the Anticancer Activity and Safety of Cisplatin

Curcumin exhibits potent anticancer activity via various mechanisms, but its in vivo efficacy has been hampered by poor solubility. Nanotechnology has been employed to deliver curcumin, but most of the reported systems suffered from low drug loading capacity and poor stability. Here, we report the development and optimization of a liposomal formulation for curcumin (Lipo-Cur) using an automated microfluidic technology. Lipo-Cur exhibited a mean diameter of 120 nm with a low polydispersity index (<0.2) and superior loading capacity (17 wt %) compared to other reported liposomal systems. Lipo-Cur increased the water solubility of curcumin by 700-fold, leading to 8-20-fold increased systemic exposure compared to the standard curcumin suspension formulation. When coadministered with cisplatin to tumor-bearing mice, Lipo-Cur augmented the antitumor efficacy of cisplatin in multiple mouse tumor models and decreased the nephrotoxicity. This is the first report demonstrating the dual effects of curcumin enabled by a nanoformulation in enhancing the efficacy and reducing the toxicity of a chemo-drug in animal models under a single and low dose administration.

Fast and slow biomembrane solubilizing detergents: Insights into their mechanism of action

Detergents are water-soluble amphiphiles. Above a critical concentration they self-organize in micelles and in the presence of phospholipids mixed micelles are formed. Much information is available on the structure of these self-assemblies and on the thermodynamics of their formation. The aim of this study was to deepen our understanding of the mechanisms of solubilization. Solubilization of lipid vesicles made of egg phosphatidylcholine (PC) by twenty one commercially available, structurally heterogeneous detergents, has been assessed by a decrease in turbidity of the vesicle suspension. Both steady-state and time-resolved measurements have been performed. The results show that the detergents under study fall into one of two categories, namely fast-solubilizing and slow-solubilizing detergents. This categorization is independent of detergent concentration, i.e. a "slow" cannot be converted into a "fast" surfactant by increasing its bulk concentration. ³¹P-NMR spectra indicate that slow-acting detergents cause either a gradual, monotonic micellization of bilayers (sodium dodecyl sulphate), or formation of more complex, perhaps non-lamellar, non-micellar intermediates (dodecylmaltoside). In contrast, fast detergents (e.g. Triton X-100) cause lysis and reassembly of vesicles before bulk solubilization takes place. These results support the idea that membrane solubilization by detergents is rapid only when surfactant transbilayer (flipping) motion is easy.

Kinetically Enhanced Fabrication of Homogeneous Biomimetic and Functional Emulsion Droplets

Characterized by a fluid and deformable interface, ligand-functionalized emulsion droplets are used as model probes to address biophysical, biological, and developmental questions. Functionalization protocols usually rely on the use of headgroup-modified phospholipids that are dissolved in the oil phase prior to emulsification, leading to a broad range of surface densities within a given droplet population. With the aim to coat particles homogeneously with biologically relevant lipids and proteins (streptavidin, immunoglobulins, etc.), we developed a reliable surface decoration protocol based on the use of polar cosolvents to dissolve the lipids in the aqueous phase after the droplet production. We show that the surface density of the lipids at the interface has a narrow normal distribution for droplets having the same size. We performed titration isotherms for lipids and biologically relevant proteins on these drops. Then, we studied the influence of the presence of surfactants in the medium on lipid insertion and compared the results for a range of polar cosolvents of increasing polarity. To assess both the generality and the biocompatibility of the method, we show that we can produce more sophisticated, monodisperse functional magnetic emulsions with a very high surface homogeneity. Using an oil denser than the surrounding culture medium, we show that IgG-coated droplets can be used as probes for phagocytosis experiments.

Optimization of Detergent-Mediated Reconstitution of Influenza A M2 Protein into Proteoliposomes

We report the optimization of detergent-mediated reconstitution of an integral membrane-bound protein, full-length influenza M2 protein, by direct insertion into detergent-saturated liposomes. Detergent-mediated reconstitution is an important method for preparing proteoliposomes for studying membrane proteins, and must be optimized for each combination of protein and membrane constituents used. The purpose of the reconstitution was to prepare samples for site-directed spin-labeling electron paramagnetic resonance (SDSL-EPR) studies. Our goals in optimizing the protocol were to minimize the amount of detergent used, reduce overall proteoliposome preparation time, and confirm the removal of all detergent. The liposomes were comprised of (1-palmitoyl-2-oleyl-sn-glycero-phosphocholine (POPC) and 1-palmitoyl-2-oleyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG), and the detergent octylglucoside (OG) was used for reconstitution. Rigorous physical characterization was applied to optimize each step of the reconstitution process. We used dynamic light scattering (DLS) to determine the amount of OG needed to saturate the preformed liposomes. During detergent removal by absorption with Bio-Beads, we quantified the detergent concentration by means of a colorimetric assay, thereby determining the number of Bio-Bead additions needed to remove all detergent from the final proteoliposomes. We found that the overnight Bio-Bead incubation used in previously published protocols can be omitted, reducing the time needed for reconstitution. We also monitored the size distribution of the proteoliposomes with DLS, confirming that the size distribution remains essentially constant throughout the reconstitution process.

Antifungal stilbene impregnation: transport and distribution on the micron-level

The transition from the living water-transporting sapwood to heartwood involves in many tree species impregnation with extractives. These differ in amount and composition, and enhance resistance against bacteria, insects or fungi. To understand the synthesis, transport and impregnation processes new insights into the biochemical processes are needed by in-situ methods. Here we show the extractive distribution in pine (Pinus sylvestris) microsections with a high lateral resolution sampled in a non-destructive manner using Confocal Raman Microscopy. Integrating marker bands of stilbenes and lipids enables to clearly track the rapid change from sapwood to heartwood within one tree ring. The higher impregnation of the cell corner, compound middle lamella, the S3 layer and pits reveals the optimization of decay resistance on the micron-level. Furthermore, deposits with changing chemical composition are elucidated in the rays and lumen of the tracheids. The spectral signature of these deposits shows the co-location of lipids and pinosylvins with changing ratios from the living to the dead tissue. The results demonstrate that the extractive impregnation on the micro- and nano-level is optimized by a symbiotic relationship of lipids and pinosylvins to enhance the tree's resistance and lifetime.

Surfactant and Cyclodextrin Induced Vesicle to Micelle to Vesicle Transformation in Aqueous Medium

The physicochemical behavior and characteristics of lipid vesicles and micelles in aqueous medium are greatly tuned by changing the ambient physical parameters, such as temperature, pH, and ionic strength. The process is also controlled by external additives and the nature of the surfactants. In this work, we have used water-soluble surfactant and cyclodextrin to transform lipid vesicles to micelles to vesicles without changing the physical ambience. In this regard, we have used a special pyrene-tagged guest compound that readily forms excimer in water and thus acts as a reporter for the process. Giant lipid vesicles (biological cell mimics) are disrupted by cationic surfactants to form mixed elongated micelles that transform to vesicles on applying a cyclodextrin host.

Nanoplasmonic Sensing and Capillary Electrophoresis for Fast Screening of Interactions between Phosphatidylcholine Biomembranes and Surfactants

Nanoplasmonic sensing (NPS), based on localized surface plasmon resonance, with sensors composed of glass covered with golden nanodisks and overlaid with a SiO2 coating was applied in this study. Egg phosphatidylcholine (eggPC), being an easily accessible membrane-forming lipid, was used for preparation of biomimicking membranes. Small unilamellar vesicles with an approximate hydrodynamic diameter of 30 nm, formed by sonication in 4-(2-hydroxyethyl)piperazine-1-ethanesulfonic acid buffer, were adsorbed within 10 min on the sensor surface either as intact vesicles or as a planar bilayer. The adsorbed biomembrane systems were further utilized for interaction studies with four different well-known surfactants (negatively and positively charged, zwitterionic, and nonionic) and each surfactant was tested at concentrations below and above the critical micelle concentration (CMC). Our results allowed the evaluation of different NPS patterns for every particular supported membrane system, surfactant, and its concentration. The most significant effect on the membrane was achieved upon the introduction of zwitterionic surfactant micelles, which in fact completely solubilized and removed the lipid membranes from the sensor surface. Other surfactant micelles interacted with the membranes and formed mixed structures remaining on the sensor surface. The studies performed at the concentrations below the CMCs of the surfactants showed that different mixed systems were formed. Depending on the supported membrane system and the type of surfactant, the mixed systems indicated different formation kinetics. Additionally, the final water rinse revealed the stability of the formed systems. To investigate the effect of the studied surfactants on the overall surface charge of the biomembrane, capillary electrophoresis (CE) experiments were carried out in parallel with the NPS analysis. The electroosmotic flow mobility of an eggPC-coated fused silica capillary was used to measure the total surface charge of the biomembrane after its treatment with the surfactants. Our results indicated in general good correlation between CE and NPS data. However, some discrepancies were seen while applying either zwitterionic or positively charged surfactants. This confirmed that CE analysis was able to provide additional data about the investigated systems. Taken together, the combination of NPS and CE proved to be an efficient way to describe the nature of interactions between biomimicking membranes and amphiphilic molecules.

Self-Assembly of Janus Nanoparticles into Transformable Suprastructures

One of the greatest challenges in colloidal self-assembly is to obtain multiple distinct but transformable suprastructures from the same particles in monophasic solvent. Here, we combined deformable and rigid lobes in snowman-shaped amphiphilic Janus nanoparticles (JNPs). These JNPs exhibited excellent ability to self-assemble into micelles, worms, mini-capsules, giant- and elongated-vesicles. This rich suprastructural diversity was obtained by kinetic manipulation of the self-assembly conditions. The suprastructures consist of four to thousands of highly oriented JNPs with dimensions ranging from 500-nanometer to 30-μm. Moreover, the suprastructures can be transformed into one another or dissembled into individual particles. These features make colloidal assembly highly comparable to that of amphiphilic molecules, however, key differences were discovered.

Tuning the photoexcitation response of cyanobacterial Photosystem I via reconstitution into Proteoliposomes

The role of natural thylakoid membrane housing of Photosystem I (PSI), the transmembrane photosynthetic protein, in its robust photoactivated charge separation with near unity quantum efficiency is not fundamentally understood. To this end, incorporation of suitable protein scaffolds for PSI incorporation is of great scientific and device manufacturing interest. Areas of interest include solid state bioelectronics, and photoelectrochemical devices that require bio-abio interfaces that do not compromise the photoactivity and photostability of PSI. Therefore, the surfactant-induced membrane solubilization of a negatively charged phospholipid (DPhPG) with the motivation of creating biomimetic reconstructs of PSI reconstitution in DPhPG liposomes is studied. Specifically, a simple yet elegant method for incorporation of PSI trimeric complexes into DPhPG bilayer membranes that mimic the natural thylakoid membrane housing of PSI is introduced. The efficacy of this method is demonstrated via absorption and fluorescence spectroscopy measurements as well as direct visualization using atomic force microscopy. This study provides direct evidence that PSI confinements in synthetic lipid scaffolds can be used for tuning the photoexcitation characteristics of PSI. Hence, it paves the way for development of fundamental understanding of microenvironment alterations on photochemical response of light activated membrane proteins.

Supramolecular "Big Bang" in a Single-Ionic Surfactant/Water System Driven by Electrostatic Repulsion: From Vesicles to Micelles

In aqueous solution, dimethyldi-n-octylammonium chloride, [DiC₈][Cl], spontaneously forms dimers at low concentrations (1-10 mM) to decrease the strength of the hydrophobic-water contact. Dimers represent ideal building blocks for the abrupt edification of vesicles at 10 mM. These vesicles are fully characterized by dynamic and static light scattering, self-diffusion nuclear magnetic resonance, and freeze-fracture transmission electron microscopy. An increase in concentration leads to electrostatic repulsion between vesicles that explode into small micelles at 30 mM. These transitions are detected by means of surface tension, conductivity, and solubility of hydrophobic solutes as well as by isothermal titration microcalorimetry. These unusual supramolecular transitions emerge from the surfactant chemical structure that combines two contradictory features: (i) the double-chain structure tending to form low planar aggregates with low water solubility and (ii) the relatively short chains giving high hydrophilicity. The well-balanced hydrophilic-hydrophobic character of [DiC₈][Cl] is then believed to be at the origin of the unusual supramolecular sequence offering new opportunities for drug delivery systems.

Biomembrane solubilization mechanism by Triton X-100: a computational study of the three stage model

The solubilization mechanism of lipid membranes in the presence of Triton X-100 (TX-100) is investigated at molecular resolution using hybrid particle field–self consistence field simulations.

Changes in physical and chemical properties of niosome membrane induced by cholesterol: a promising approach for niosome bilayer intervention

Recently, the self-assembly property of nonionic surfactants has been utilized to create vesicles as alternatives to liposomes.

Microvesicle release and micellar attack as the alternative mechanisms involved in the red-blood-cell-membrane solubilization induced by arginine-based surfactants

Two novel arginine-based surfactants, Bz-Arg-NHC₁₀ and Bz-Arg-NHC₁₂, were characterized with respect to surface properties and their interaction with human red-blood-cell (HRBC) membranes.

"Staying Out" Rather than "Cracking In": Asymmetric Membrane Insertion of 12:0 Lysophosphocholine

Interactions between detergents and model membranes are well described by the three-stage model: saturation and solubilization boundaries divide bilayer-only, bilayer-micelle coexistence, and micelle-only ranges. An underlying assumption of the model is the equilibration of detergent between the two membrane leaflets. However, many detergents partition asymmetrically at room temperature due to slow flip-flop, such as sodium dodecyl sulfate (SDS) and lysolipids. In this work, we use isothermal titration calorimetry (ITC) and dynamic light scattering (DLS) to investigate the solubilization of unilamellar POPC vesicles by 12:0 lysophosphocholine (12:0 LPC). Flip-flop of 12:0 LPC occurs beyond the time scale of our experiments, which establish a characteristic nonequilibrated state with asymmetric distribution: 12:0 LPC partitions primarily into the outer leaflet. Increasing asymmetry stress in the membrane does not lead to membrane failure, i.e., "cracking in" as seen for alkyl maltosides and other surfactants; instead, it reduces further membrane insertion which leads to the "staying out" of 12:0 LPC in solution. At above the critical micellar concentration of 12:0 LPC in the presence of the membrane, micelles persist and accommodate further LPC but take up lipid from vesicles only very slowly. Ultimately, solubilization proceeds via the micellar mechanism (Kragh-Hansen et al., 1995). With a combination of demicellization and solubilization experiments, we quantify the molar ratio partition coefficient (0.6 ± 0.1 mM^-1) and enthalpy of partitioning (6.1 ± 0.3 kJ·mol^-1) and estimate the maximum detergent/lipid ratio reached in the outer leaflet (<0.13). Despite the inapplicability of the three-stage model to 12:0 LPC at room temperature, we are able to extract quantitative information from ITC solubilization experiments and DLS that are important for the understanding of asymmetry-dependent processes such as endocytosis and the gating of mechanosensitive channels in vitro.

pH-Driven Self-Assembly of Acidic Microbial Glycolipids

Microbial glycolipids are a class of well-known compounds, but their self-assembly behavior is still not well understood. While the free carboxylic acid end group makes some of them interesting stimuli-responsive compounds, the sugar hydrophilic group and the nature of the fatty acid chain make the understanding of their self-assembly behavior in water not easy and highly unpredictable. Using cryo-transmission electron microscopy (cryo-TEM) and both pH-dependent in situ and ex situ small angle X-ray scattering (SAXS), we demonstrate that the aqueous self-assembly at room temperature (RT) of a family of β-d-glucose microbial glycolipids bearing a saturated and monounsaturated C18 fatty acid chain cannot be explained on the simple basis of the well-known packing parameter. Using the "pH-jump" process, we find that the molecules bearing a monosaturated fatty acid forms vesicles below pH 6.2, as expected, but the derivative with a saturated fatty acid forms infinite bilayer sheets below pH 7.8, instead of vesicles. We show that this behavior can be explained on the different bilayer membrane elasticity as a function of temperature. Membranes are either flexible or stiff for experiments performed at a temperature respectively above or below the typical melting point, TM, of the lipidic part of each compound. Finally, we also show that the disaccharide-containing acidic cellobioselipid forms a majority of chiral fibers, instead of the expected micelles.

Self-assembly of size-controlled liposomes on DNA nanotemplates

Artificial lipid-bilayer membranes are valuable tools for the study of membrane structure and dynamics. For applications such as the study of vesicular transport and drug delivery, there is a pressing need for artificial vesicles with controlled size. However, controlling vesicle size and shape with nanometre precision is challenging, and approaches to achieve this can be heavily affected by lipid composition. Here, we present a bio-inspired templating method to generate highly monodispersed sub-100-nm unilamellar vesicles, where liposome self-assembly was nucleated and confined inside rigid DNA nanotemplates. Using this method, we produce homogeneous liposomes with four distinct predefined sizes. We also show that the method can be used with a variety of lipid compositions and probe the mechanism of templated liposome formation by capturing key intermediates during membrane self-assembly. The DNA nanotemplating strategy represents a conceptually novel way to guide lipid bilayer formation and could be generalized to engineer complex membrane/protein structures with nanoscale precision.

NH125 kills methicillin-resistant Staphylococcus aureus persisters by lipid bilayer disruption

BACKGROUND

NH125, a known WalK inhibitor kills MRSA persisters. However, its precise mode of action is still unknown.

METHODS & RESULTS

The mode of action of NH125 was investigated by comparing its spectrum of antimicrobial activity and its effects on membrane permeability and giant unilamellar vesicles (GUVs) with walrycin B, a WalR inhibitor and benzyldimethylhexadecylammonium chloride (16-BAC), a cationic surfactant. NH125 killed persister cells of a variety of Staphylococcus aureus strains. Similar to 16-BAC, NH125 killed MRSA persisters by inducing rapid membrane permeabilization and caused the rupture of GUVs, whereas walrycin B did not kill MRSA persisters or induce membrane permeabilization and did not affect GUVs.

CONCLUSION

NH125 kills MRSA persisters by interacting with and disrupting membranes in a detergent-like manner.