Molecular organization of antibiotic amphotericin B in dipalmitoylphosphatidylcholine monolayers induced by K+ and Na+ ions: The Langmuir technique study

Effect of high sodium ion level on the interaction of AmB with a cholesterol-rich phospholipid monolayer

Invasive fungal infections are a primary reason for high mortality in immunocompromised people, especially in critically ill patients, such as intensive care unit (ICU) patients, advanced cancer patients, or severe burn patients. Hypernatremia also can increase mortality in severely ill patients. Amphotericin B (AmB) is the gold standard for treating infections, but in severely ill patients, AmB can cause hematotoxicity when administered intravenously due to its interaction with cholesterol on red blood cell membranes. This results in limited doses of AmB and affects the treatment of infections. The proportion of cholesterol molecules in membrane lipids in red blood cells is as high as 50 mol%, and the sodium ions can influence the interaction between AmB and lipids on the membrane. Therefore, in the complex clinical situation of a severely ill patient with a fungal infection and hypernatremia, the interaction between amphotericin B and the red blood cell membranes is worth studying in depth. In this work, the interaction between AmB and the dipalmitoyl phosphatidylcholine (DPPC)/cholesterol mixed monolayer in the presence of high sodium ion levels was studied when the proportion of cholesterol was 50%. The results show that the effect of AmB on reducing the monolayer's area at a high level of sodium ions is slightly stronger at 30 mN/m. The effect of AmB on reducing the elastic modulus of the DPPC/Chol monolayer is significantly weakened by a high sodium ion level, compared with the level of sodium ions at normal physiological concentration. The higher the sodium ion concentration, the weaker the intermolecular force of the DPPC/Chol/AmB mixed monolayers. The scanning electron microscope (SEM) and atomic force microscopy (AFM) observations suggest that at a high sodium ion level, the presence of AmB significantly reduces the surface roughness of the DPPC/Chol monolayer. AmB may bind to cholesterol molecules, and it isolates cholesterol from the monolayer, resulting in a reduced height of the cholesterol-rich monolayer and an increasingly dispersed monolayer region. The results are beneficial to understanding the mechanism of impact of a high sodium ion level on the relationship between AmB and red blood cell membranes rich in cholesterol and are valuable for understanding the hemolytic toxicity of AmB to red blood cells at a high sodium ion level.

Effect of Amphotericin B on the Thermodynamic Properties and Surface Morphology of the Pulmonary Surfactant Model Monolayer during Respiration

During the COVID-19 pandemic, the treatment of pulmonary fungal infection faced noteworthy challenges. Amphotericin B has shown promising therapeutic effects as an inhalation treatment for pulmonary fungal infections, especially those associated with the COVID-19 virus, due to its rare resistance. However, because the drug frequently produces renal toxicity, its effective dose is limited in clinical use. In this work, the DPPC/DPPG mixed monolayer was used as the pulmonary surfactant monolayer to study the interaction between amphotericin B and the pulmonary surfactant monolayer during inhalation therapy using the Langmuir technique and atomic force microscopy. The effects of different molar ratios of AmB on the thermodynamic properties and surface morphology of the pulmonary surfactant monolayer at different surface pressures was evaluated. The results showed that when the molar ratio of AmB to lipids in the pulmonary surfactant was less than 1:1, the main intermolecular force was attractive at a surface pressure greater than 10 mN/m. This drug had little effect on the phase transition point of the DPPC/DPPG monolayer, but decreased the height of the monolayer at 15 mN/m and 25 mN/m. When the molar ratio of AmB to lipids was greater than 1:1, the intermolecular force was mainly repulsive at a surface pressure greater than 15 mN/m, and AmB increased the height of the DPPC/DPPG monolayer at both 15 mN/m and 25 mN/m. These results are helpful in understanding the interaction between the pulmonary surfactant model monolayer and different doses of drugs at various surface tensions during respiration.

Regulation of calcium ions on the interaction between amphotericin B and cholesterol-rich phospholipid monolayer in LE phase and LC phase

Amphotericin B, as a "gold standard", is used to treat invasive fungal infections. The AmB molecule can bind easily to cholesterol and damage cell membranes, so it produces the toxicity on cell membrane, which limits its clinical dose. However, the interaction between AmB and cholesterol-rich membrane is unclear now. The phase state of the membrane and the metal cation outside cell membrane may affect the interaction between AmB and the membrane. In this work, the effects of amphotericin B on the mean molecular area, elastic modulus and stability of mammalian cell membrane rich in cholesterol in the presence of Ca²⁺ ions were studied using DPPC/Chol mixed Langmuir monolayer as a model. The Langmuir-Blodgett method and AFM test were used to study the effects of this drug on the morphology and height of cholesterol-rich phospholipid membrane in the presence of Ca²⁺ ions. The influence of calcium ions on the mean molecular area and the limiting molecular area was similar in LE phase and in LC phase. The calcium ions made the monolayer more condensed. However, calcium ions can weaken the shortening effect of AmB on the relaxation time of the DPPC/Chol mixed monolayer in LE phase but enhance it in LC phase. Interestingly, calcium ions caused a LE-LC coexistence phase to occur in the DPPC/Chol/AmB mixed monolayers at 35mN/m, which was confirmed by atomic force microscopy. The results can help to understand the interaction between amphotericin B and cell membrane rich in cholesterol in the calcium ions environment.

Polyene Antibiotics Physical Chemistry and Their Effect on Lipid Membranes; Impacting Biological Processes and Medical Applications

This review examined a collection of studies regarding the molecular properties of some polyene antibiotic molecules as well as their properties in solution and in particular environmental conditions. We also looked into the proposed mechanism of action of polyenes, where membrane properties play a crucial role. Given the interest in polyene antibiotics as therapeutic agents, we looked into alternative ways of reducing their collateral toxicity, including semi-synthesis of derivatives and new formulations. We follow with studies on the role of membrane structure and, finally, recent developments regarding the most important clinical applications of these compounds.

A Langmuir-Blodgett Study of the Interaction between Amphotericin B and Lipids of Histoplasma capsulatum

Histoplasma capsulatum is a dimorphic, thermal, and nutritional fungus. In the environment and at an average temperature of 28 °C, it develops as a mold that is composed of infecting particles. Once in the host or in cultures at 37 °C, it undergoes a transition into the parasitic form. In the present work, we performed chemical extraction and characterization using chromatography techniques of the associated lipid composition of the external surface of the cell wall of the mycelial phase of two isolates of the H. capsulatum: one clinical and one environmental. Several differences were evidenced in the fatty acids in the phospholipid composition. Surface pressure–area isotherms and compression module curves of the Amphotericin B and lipid extract monolayers, as well as (AmB)-lipid extract mixed monolayers were recorded. Results show a high affinity of AmB towards lipid extracts. The most stable monolayers were formed by AmB + environmental with a mass ratio of 1:3 and AmB + clinical with a mass ratio of 1:2. Knowledge of the AmB aggregation processes at a molecular level and the characterization of the lipid extracts allows the possibility to understand the interaction between the AmB and the lipid fractions of H. capsulatum.

Influence of Potassium Ions on Act of Amphotericin B to the DPPC/Chol Mixed Monolayer at Different Surface Pressures

Amphotericin B (AmB) is an antifungal drug that rarely develops resistance. It has an affinity with the cholesterol on mammalian cell membranes, disrupting the structure and function of the membranes, which are also affected by potassium ions. However, the mechanism is unclear. In this paper, the Langmuir monolayer method was used to study the effects of potassium ions on the surface pressure–mean molecular area of isotherms, elastic modulus and the surface pressure–time curves of a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/cholesterol (DPPC/Chol) monolayer and a DPPC/Chol/AmB monolayer. The morphology and thickness of the Langmuir–Blodgett films were studied via atomic force microscopy. The results showed that AmB can increase the mean molecular area of the DPPC/Chol mixed monolayer at low pressures (15 mN/m) but reduces it at high pressures (30 mN/m). The potassium ions may interfere with the effect of AmB in different ways. The potassium ions can enhance the influence of AmB on the stability of monolayer at low surface pressures, but weaken it at high surface pressures. The potassium ions showed significant interference with the interaction between AmB and the cholesterol-enriched region. The results are helpful for us to understand how the effect of amphotericin B on the phospholipid membrane is interfered with by potassium ions when amphotericin B enters mammalian cell membrane.

Preparation, Physicochemical Characterization and Anti-Fungal Evaluation of Amphotericin B-Loaded PLGA-PEG-Galactosamine Nanoparticles

Purpose: The present study aimed to formulate PLGA and PLGA-PEG-galactosamine nanoparticles (NPs) loaded with amphotericin B with appropriate physicochemical properties and antifungal activity. PLGA was functionalized with GalN to increase the adhesion and antifungal activity of NPs against Candida albicans.

Methods: The physicochemical properties of NPs were characterized by particle size determination, zeta potential, drug crystallinity, loading efficiency, dissolution studies, differential scanning calorimeter (DSC), X-ray powder diffraction (XRPD), and Fourier transform infrared (FT-IR). Antifungal activity of the NPs at different drug/polymer ratios was examined by determining minimum inhibitory concentrations (MICs).

Results: the FT-IR and ¹ HNMR analysis successfully confirmed the formation of PLGA- PEG-GalN NPs. The PLGA NPs were in the size range of 174.1 ± 3.49 to 238.2±7.59 nm while PLGA-GalN NPs were 255.6 ±4.08 nm in size , respectively. Loading efficiency was in the range of 67%±2.4 to 77%±1.6, and entrapment efficiency in the range of 68.185%±1.9 to 73.05%±0.6. Zeta potential and loading efficiency for PLGA-GalN NPs were –0.456, 71%. The NPs indicated an amorphous status according to XRPD patterns and DSC thermograms. The PLGA-PEG-GalN NPs showed higher fungistatic activity than PLGA NPs.

Conclusion: the results demonstrated that the antifungal activity of PLGA-PEG-GalN NPs was higher than pure amphotericin B and PLGA NPs.

DPPC monolayer response to non-spanning cobalt-cage metallosurfactants: Electrostatic complex formation

A novel series of amphiphilic cobalt-cage derivatives (ACCD), bearing a diaza-crown bridge and varying alkyl chains, facilitate ion transport across biomembrane models via self-aggregation. In this study, compression isotherm analyses and atomic force microscopy (AFM) were used to assess the interactions of these amphiphiles with Langmuir monolayers of dipalmitoylphosphatidylcholine (DPPC) in order to elucidate electrostatic and steric contributions to ion transport. The stability and compressibility of DPPC monolayers are disrupted by ACCD molecules with short (C₁₂) alkyl chains. These top-heavy amphiphiles (large cone angles) create voids at the interface of the hydrophobic/aqueous layer leading to monolayer expansion and packing efficiency of the aliphatic chains is disrupted. Long-tailed analogues (C₁₆, C₁₈) are cohesively integrated into DPPC monolayers due to their smaller cone angles at the interfacial region and increased hydrocarbon compatibility in the hydrophobic region. Thermodynamic data indicate the formation of electrostatic complexes between DPPC and longer-tailed amphiphiles consistent with AFM observations of aggregate structures at the corresponding concentrations.

Investigation of Surface Behavior of DPPC and Curcumin in Langmuir Monolayers at the Air-Water Interface

Langmuir monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and a mixture of DPPC with curcumin (CUR) have been investigated at the air-water interface through a combination of surface pressure measurements and atomic force microscopy (AFM) observation. By analyzing the correlation data of mean molecular areas, the compressibility coefficient, and other thermodynamic parameters, we obtained that the interaction between the two components perhaps was mainly governed by the hydrogen bonding between the amino group of DPPC and the hydroxyl groups of CUR. CUR markedly affected the surface compressibility, the thermodynamic stability, and the thermodynamic phase behaviors of mixed monolayers. The interaction between CUR and DPPC was sensitive to the components and the physical states of mixed monolayers under compression. Two-dimensional phase diagrams and interaction energies indicated that DPPC and CUR molecules were miscible in mixed monolayers. AFM images results were in agreement with these analyses results of experimental data. This study will encourage us to further research the application of CUR in the biomedical field.

Interfacial molecular interactions based on the conformation recognition between the insoluble antitumor drug AD-1 and DSPC

In this study, molecular interactions between the anti-cancer agent 20(R)-25-methoxyl-dammarane-3β, 12β, 20-triol (AD-1) and phospholipid 1,2-Distearoyl-sn-glycero-3-phosphocholine (DSPC) were investigated using the Langmuir film balance technique. The characteristics of binary Langmuir monolayers consisting of DSPC and AD-1 were conducted on the basis of the surface pressure-area per molecule (π-A) isotherms. It was found that the drug was able to become efficiently inserted into preformed DSPC monolayers, indicating a preferential interaction between AD-1 and DSPC. For the examined lateral pressure at 20mN/m, the largest negative values of ΔGex were found for the AD-1/DSPC monolayer, which should be the most stable. Based on the calculated values of ΔGex, we found that the AD-1/DSPC systems exhibited the best mixed characteristics when the molar fraction of the AD-1 was 0.8; at that relative concentration, the AD-1 molecules can mix better and interact with the phospholipid molecules. In addition, the drug-DSPC binary supramolecular structure was also deposited on the mica plates as shown by atomic force microscopy (AFM). Finally, molecular docking calculations explained satisfactorily that, based on the conformations interactions (conformation recognition), even at an AD-1/DSPC molar ratio as high as 8:2, the interfacial stabilization of the AD-1/DSPC system was fairly strong due to hydrophobic interactions. A higher loading capacity of DSPC might be possible, as it is associated with a more flexible geometrical environment, which allows these supramolecular structures to accept larger increases in drug loading upon steric binding.

David and Goliath: chemical perturbation of eukaryotes by bacteria

Environmental microbes produce biologically active small molecules that have been mined extensively as antibiotics and a smaller number of drugs that act on eukaryotic cells. It is known that there are additional bioactives to be discovered from this source. While the discovery of new antibiotics is challenged by the frequent discovery of known compounds, we contend that the eukaryote-active compounds may be less saturated. Indeed, despite there being far fewer eukaryotic-active natural products these molecules interact with a far richer diversity of molecular and cellular targets.

Evaluation of an anti-parasitic compound extracted from Streptomyces sp. HL-2-14 against fish parasite Ichthyophthirius multifiliis

The present study was conducted to evaluate the anti-parasitic activity of a pure compound from Streptomyces sp. HL-2-14 against fish parasite Ichthyophthirius multifiliis, and elucidate its chemical structure. By electron ionization mass spectrometry (ESI-MS) and nuclear magnetic resonance spectrum (1H NMR and 13C NMR), the compound was identified as amphotericin B (AmB). The in vitro trials revealed that AmB can effectively kill the theronts and tomonts of I. multifiliis with the median lethal concentration (LC50) of 0·8 mg L−1 at 30 min for the theronts and 4·3 mg L−1 at 2 h for the tomonts, respectively. AmB at 5 mg L−1 significantly reduced I. multifiliis infectivity prevalence and intensity on grass carp (Ctenopharyngodon idella), and consequently decreased fish mortality, from 100% in control group to 30% in treated group. The 72 h acute toxicity (LC50) of AmB on grass carp was 20·6 mg L−1, but fish mortality was occurred when exposure to 13·0 mg L−1. These results indicated that AmB was effective in the therapy of I. multifiliis infection, but the safety concentration margin is relatively narrow. Further efforts aiming to decrease the toxicity and improve the therapeutic profile remain to be needed.

Recent progress in the study of the interactions of amphotericin B with cholesterol and ergosterol in lipid environments

In the past decade substantial progress has been made in understanding the organization and biological activity of amphotericin B (AmB) in the presence of sterols in lipid environments. This review concentrates mainly on interactions of AmB with lipids and sterols, AmB channel formation in membranes, AmB aggregation, AmB modifications important for understanding its biological activity, and AmB models explaining its mechanism of action. Most of the reviewed studies concern monolayers at the water–gas interface, monolayers deposited on a solid substrate by use of the Langmuir–Blodgett technique, micelles, vesicles, and multi-bilayers. Liposomal AmB formulations and drug delivery are intentionally omitted, because several reviews dedicated to this subject are already available.

The negligible effects of the antifungal natamycin on cholesterol-dipalmitoyl phosphatidylcholine monolayers may explain its low oral and topical toxicity for mammals

Natamycin is an effective, broad spectrum antifungal with no reported resistance, in contrast to most antimicrobials. It also exhibits reduced (oral and topical) toxicity to humans, which is probably associated with the lack of effects on mammalian cell membranes. In this paper we employ Langmuir monolayers to mimic a cell membrane, whose properties are interrogated with various techniques. We found that natamycin has negligible effects on Langmuir monolayers of dipalmitoyl phosphatidylcholine (DPPC), but it strongly affects cholesterol monolayers. Natamycin causes the surface pressure isotherm of a cholesterol monolayer to expand even at high surface pressures since it penetrates into the hydrophobic chains. It also reduces the compressibility modulus, probably because natamycin disturbs the organization of the cholesterol molecules, as inferred with polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). In mixed cholesterol/DPPC monolayers, strong effects from natamycin were only observed when the cholesterol concentration was 50mol% or higher, well above its concentration in a mammalian cell membrane. For a sterol concentration that mimics a real cell membrane in mammals, i.e. with 25mol% of cholesterol, the effects were negligible, which may explain why natamycin has low toxicity when ingested and/or employed to treat superficial fungal infections.

Interaction between ganglioside G(M1) and diosgenin in langmuir monolayers at the air/water interface

The interaction between ganglioside GM1 (GM1) and diosgenin (Dios) in mixed monolayers was investigated using surface pressure measurements and atomic force microscopy (AFM). The miscibility and stability of the mixed monolayer was evaluated both in a qualitative and quantitative way in terms of the excess mean molecular area (ΔAex), excess Gibbs energy (ΔGex). The ΔAex of mixed GM1/Dios monolayer was found to have positive deviations from ideality at low Dios mole fractions (XDios = 0.2). Above XDios = 0.2, there was a marked negative deviation from ideal mixing, indicating attractive interaction between G(M1) and Dios. According to the values of excess Gibbs energy of mixing monolayers, the more stable monolayers assayed was: XDios = 0.6. The compressibility coefficient was assessed at various surface pressures. The monolayer of Dios was more elasticity or rigid than G(M1). The AFM images for the mixed monolayers at 30 mN/m indicated there was obvious phase separation in the mixed monolayers. These findings will provide useful information for understanding the interaction between drug and lipids.

Membrane-mediated neuroprotection by curcumin from amyloid-β-peptide-induced toxicity

Amyloid-β peptide (Aβ)-membrane interactions have been implicated in the formation of toxic oligomers that permeabilize membranes, allowing an influx of calcium ions and triggering cell death in the pathogenesis of Alzheimer's disease (AD). Curcumin, a small dietary polyphenolic molecule, has been shown to reduce Aβ-induced toxicity and AD pathology. We investigate here the effect of curcumin on Aβ40-induced toxicity in cultured human neuroblastoma SH-SY5Y cells and test a novel neuroprotection mechanism in which curcumin reduces Aβ-membrane interactions and attenuates Aβ-induced membrane disruptions. Predominantly monomeric Aβ40 exerts toxicity toward SH-SY5Y cells and has been shown to insert spontaneously into anionic lipid monolayers at the air/water interface, resulting in the misfolding and assembly of Aβ into β-sheet-enriched oligomers. Concomitantly, membrane morphology and lipid packing are disrupted. Curcumin dose-dependently ameliorates Aβ-induced neurotoxicity and reduces either the rate or extent of Aβ insertion into anionic lipid monolayers. Moreover, curcumin reduces Aβ-induced dye leakage from lipid-bilayer-covered, dye-loaded, porous silica microspheres. Because curcumin neither affects the inherent surface activity of Aβ nor modifies the membrane properties, it reduces Aβ insertion by directly attenuating Aβ-membrane interactions and reducing Aβ-induced membrane disruption. Although the exact molecular mechanism of curcumin's membrane protective effect remains unclear, this effect could in part contribute to curcumin's neuroprotective effect with respect to Aβ-induced toxicity. Our work reveals a novel molecular mechanism by which curcumin reduces Aβ-related pathology and toxicity and suggests a therapeutic strategy for preventing or treating AD by targeting the inhibition of Aβ-induced membrane disruption.

Cholesterol as a factor regulating the influence of natural (PAF and lysoPAF) vs synthetic (ED) ether lipids on model lipid membranes

In this work we have performed a comparative study on the effect of antineoplastic ether lipid-edelfosine (ED), its natural analogs - Platelet Activating Factor (PAF) and its precursor (lyso-PAF), both lacking anticancer properties, on cholesterol/phosphatidylcholine (Chol/PC) monolayers, serving as model membranes. Since all the above ether lipids are membrane active, it can be expected that their effect on membranes may differentiate their biological activity. Our investigations were aimed at studying potential relationship of the effect of ED, PAF and lyso-PAF on model membranes, differing in condensation. We have modified molecular packing of Chol/PC model systems either by increasing the level of sterol in the system or changing the structure of PC, while keeping the same sterol content. Additionally, we have performed a detailed comparison of the miscibility of ED, PAF and lyso-PAF with various membrane lipids. The collected data evidenced that all the investigated ether lipids influence Chol/PC films in the same way; however, in a different magnitude. Moreover, the interactions of ED, PAF and lyso-PAF with model membranes were the strongest at the highest level of sterol in the system. A thorough analysis of the obtained results has proved that the effect of the investigated ether lipids on membranes is not dependent on the condensation of the system, but it is strongly determined by the concentration of cholesterol. Since ED was found to interact with model membranes stronger than PAF and lyso-PAF, we have suggested that this fact may contribute to differences in cytotoxicity of these compounds.