The effect of lipid phase on liposome stability upon exposure to the mechanical stress

Injectable Liposome-Loaded Hydrogel Formulations with Controlled Release of Curcumin and α-Tocopherol for Dental Tissue Engineering

An injectable hydrogel formulation is developed utilizing low- and high-molecular-weight chitosan (LCH and HCH) incorporated with curcumin and α-tocopherol-loaded liposomes (Lip/Cur+Toc). Cur and Toc releases are delayed within the hydrogels. The injectability of hydrogels is proved via rheological analyses. In vitro studies are conducted using human dental pulp stem cells (hDPSCs) and human gingival fibroblasts (hGFs) to examine the biological performance of the hydrogels toward endodontics and periodontics, respectively. The viability of hDPSCs treated with the hydrogels with Lip/Cur+Toc is the highest till day 14, compared to the neat hydrogels. During odontogenic differentiation tests, alkaline phosphatase (ALP) enzyme activity of hDPSCs is induced in the Cur-containing groups. Biomineralization is enhanced mostly with Lip/Cur+Toc incorporation. The viability of hGFs is the highest in HCH combined with Lip/Cur+Toc while wound healing occurs almost 100% in both (Lip/Cur+Toc@LCH and Lip/Cur+Toc@HCH) after 2 days. Antioxidant activity of Lip/Cur+Toc@LCH on hGFs is significantly the highest among the groups. Antimicrobial tests demonstrate that Lip/Cur+Toc@LCH is more effective against Escherichia coli whereas so is Lip/Cur+Toc@HCH against Staphylococcus aureus. The antimicrobial mechanism of the hydrogels is investigated for the first time through various computational models. LCH and HCH loaded with Lip/Cur+Toc are promising candidates with multi-functional features for endodontics and periodontics.

Lipid-Based Nanotechnology: Liposome

Over the past several decades, liposomes have been extensively developed and used for various clinical applications such as in pharmaceutical, cosmetic, and dietetic fields, due to its versatility, biocompatibility, and biodegradability, as well as the ability to enhance the therapeutic index of free drugs. However, some challenges remain unsolved, including liposome premature leakage, manufacturing irreproducibility, and limited translation success. This article reviews various aspects of liposomes, including its advantages, major compositions, and common preparation techniques, and discusses present U.S. FDA-approved, clinical, and preclinical liposomal nanotherapeutics for treating and preventing a variety of human diseases. In addition, we summarize the significance of and challenges in liposome-enabled nanotherapeutic development and hope it provides the fundamental knowledge and concepts about liposomes and their applications and contributions in contemporary pharmaceutical advancement.

Novel liposomal glatiramer acetate: Preparation and immunomodulatory evaluation in murine model of multiple sclerosis

The frequent administration rate required for Glatiramer acetate (GA), a first-line therapy for Multiple sclerosis (MS), poses patient compliance issues. Only a small portion of the subcutaneously administered GA is available for phagocytosis by macrophages, as most of it is hydrolyzed at its administration site or excreted renally. To unravel these hurdles, we have prepared liposomal formulations of GA through thin film-hydration method plus extrusion. The clinical and histopathological efficacy of GA-loaded liposomes were assessed in prophylactic and therapeutic manners on murine model of MS (experimental autoimmune encephalomyelitis (EAE)). The selected GA liposomal formulation showed favorable size (275 nm on average), high loading efficiency, and high macrophage localization. Moreover, administration of GA-liposomes in mice robustly suppressed the inflammatory responses and decreased the inflammatory and demyelinated lesion regions in CNS compared to the free GA with subsequent reduction of the EAE clinical score. Our study indicated that liposomal GA could be served as a reliable nanomedicine-based platform to hopefully curb MS-related aberrant autoreactive immune responses with higher efficacy, longer duration of action, fewer administration frequencies, and higher delivery rate to macrophages. This platform has the potential to be introduced as a vaccine for MS after clinical translation and merits further investigations.

Preparing Size-Controlled Liposomes Modified with Polysaccharide Derivatives for pH-Responsive Drug Delivery Applications

The liposome particle size is an important parameter because it strongly affects content release from liposomes as a result of different bilayer curvatures and lipid packing. Earlier, we developed pH-responsive polysaccharide-derivative-modified liposomes that induced content release from the liposomes under weakly acidic conditions. However, the liposome used in previous studies size was adjusted to 100-200 nm. The liposome size effects on their pH-responsive properties were unclear. For this study, we controlled the polysaccharide-derivative-modified liposome size by extrusion through polycarbonate membranes having different pore sizes. The obtained liposomes exhibited different average diameters, in which the diameters mostly corresponded to the pore sizes of polycarbonate membranes used for extrusion. The amounts of polysaccharide derivatives per lipid were identical irrespective of the liposome size. Introduction of cholesterol within the liposomal lipid components suppressed the size increase in these liposomes for at least three weeks. These liposomes were stable at neutral pH, whereas the content release from liposomes was induced at weakly acidic pH. Smaller liposomes exhibited highly acidic pH-responsive content release compared with those from large liposomes. However, liposomes with 50 mol% cholesterol were not able to induce content release even under acidic conditions. These results suggest that control of the liposome size and cholesterol content is important for preparing stable liposomes at physiological conditions and for preparing highly pH-responsive liposomes for drug delivery applications.

Improved skin permeation of transferosomes containing Eulophia macrobulbon extract

Eulophia macrobulbon (EM) extract-loaded transferosomes represent an advanced approach for enhancing skin permeation of bioactive compounds. The formulations improving skin permeation and characterizations of transferosomes were studied, including morphology, entrapment efficiency (EE), vesicle size, polydispersity index (PDI), zeta potential, and skin permeation in the Strat-M® synthetic membrane. Vesicle size increased with increasing transition temperature (Tm) of phosphatidylcholine and the hydrophilic-lipophilic balance (HLB) of the surfactant used as an edge activator. EM extract-loaded transferosomes with varying amounts of phosphatidylcholine, surfactants, and EM extract showed non-significant differences in EE, PDI, and zeta potential. The results demonstrated that the EM extract-loaded transferosomes improved membrane permeability better than the EM solution. The EM solution exhibited a shorter lag time. Considering the advantages of the EM extract-loaded transferosomes and EM solutions, a combination of both formulations was developed in this study. The results showed that the lag time decreased and membrane permeation increased. This study highlights a novel system combining EM extract-loaded transferosomes and an EM solution, exhibiting considerable improvement in skin permeation and presenting the potential for an efficient transdermal drug delivery system for natural bioactive compounds.

Novel Approach for the Approximation of Vitamin D3 Pharmacokinetics from In Vivo Absorption Studies

The changing environment and modified lifestyles have meant that many vitamins and minerals are deficient in a significant portion of the human population. Therefore, supplementation is a viable nutritional approach, which helps to maintain health and well-being. The supplementation efficiency of a highly hydrophobic compound such as cholecalciferol (logP > 7) depends predominantly on the formulation. To overcome difficulties associated with the evaluation of pharmacokinetics of cholecalciferol, a method based on the short time absorption data in the clinical study and physiologically based mathematical modeling is proposed. The method was used to compare pharmacokinetics of liposomal and oily formulations of vitamin D3. The liposomal formulation was more effective in elevating calcidiol concentration in serum. The determined AUC value for liposomal vitamin D3 formulation was four times bigger than that for the oily formulation.

In-House Innovative "Diamond Shaped" 3D Printed Microfluidic Devices for Lysozyme-Loaded Liposomes

Nanotechnology applications have emerged as one of the most actively researched areas in recent years. As a result, substantial study into nanoparticulate lipidic systems and liposomes (LPs) has been conducted. Regardless of the advantages, various challenges involving traditional manufacturing processes have hampered their expansion. Here, the combination of microfluidic technology (MF) and 3D printing (3DP) digital light processing (DLP) was fruitfully investigated in the creation of novel, previously unexplored "diamond shaped" devices suitable for the production of LPs carrying lysozyme as model drug. Computer-aided design (CAD) software was used designing several MF devices with significantly multiple and diverse geometries. These were printed using a high-performance DLP 3DP, resulting in extremely high-resolution chips that were tested to optimize the experimental condition of MF-based LPs. Monodisperse narrow-sized lysozyme-loaded PEGylated LPs were produced using in-house devices. The developed formulations succumbed to stability tests to determine their consistency, and then an encapsulation efficacy (EE) study was performed, yielding good findings. The in vitro release study indicated that lysozyme-loaded LPs could release up to 93% of the encapsulated cargo within 72 h. Therefore, the proficiency of the association between MF and 3DP was demonstrated, revealing a potential growing synergy.

Chemopreventive Potential of Dietary Nanonutraceuticals for Prostate Cancer: An Extensive Review

There are more than two hundred fifty different types of cancers, that are diagnosed around the world. Prostate cancer is one of the suspicious type of cancer spreading very fast around the world, it is reported that in 2018, 29430 patients died of prostate cancer in the United State of America (USA), and hence it is expected that one out of nine men diagnosed with this severe disease during their lives. Medical science has identified cancer at several stages and indicated genes mutations involved in the cancer cell progressions. Genetic implications have been studied extensively in cancer cell growth. So most efficacious drug for prostate cancer is highly required just like other severe diseases for men. So nutraceutical companies are playing major role to manage cancer disease by the recommendation of best natural products around the world, most of these natural products are isolated from plant and mushrooms because they contain several chemoprotective agents, which could reduce the chances of development of cancer and protect the cells for further progression. Some nutraceutical supplements might activate the cytotoxic chemotherapeutic effects by the mechanism of cell cycle arrest, cell differentiation procedures and changes in the redox states, but in other, it also elevate the levels of effectiveness of chemotherapeutic mechanism and in results, cancer cell becomes less reactive to chemotherapy. In this review, we have highlighted the prostate cancer and importance of nutraceuticals for the control and management of prostate cancer, and the significance of nutraceuticals to cancer patients during chemotherapy.

Bioavailability by design — Vitamin D3 liposomal delivery vehicles

Vitamin D3 deficiency has serious health consequences, as demonstrated by its effect on severity and recovery after COVID-19 infection. Because of high hydrophobicity, its absorption and subsequent redistribution throughout the body are inherently dependent on the accompanying lipids and/or proteins. The effective oral vitamin D₃ formulation should ensure penetration of the mucus layer followed by internalization by competent cells. Isothermal titration calorimetry and computer simulations show that vitamin D₃ molecules cannot leave the hydrophobic environment, indicating that their absorption is predominantly driven by the digestion of the delivery vehicle. In the clinical experiment, liposomal vitamin D₃ was compared to the oily formulation. The results obtained show that liposomal vitamin D₃ causes a rapid increase in the plasma concentration of calcidiol. No such effect was observed when the oily formulation was used. The effect was especially pronounced for people with severe vitamin D₃ deficiency.

Iron oxide nanoflowers encapsulated in thermosensitive fluorescent liposomes for hyperthermia treatment of lung adenocarcinoma

Magnetic hyperthermia (MHT) is in the spotlight of nanomedical research for the treatment of cancer employing magnetic iron oxide nanoparticles and their intrinsic capability for heat dissipation under an alternating magnetic field (AMF). Herein we focus on the synthesis of iron oxide nanoflowers (Nfs) of different sizes (15 and 35 nm) and coatings (bare, citrate, and Rhodamine B) while comparing their physicochemical and magnetothermal properties. We encapsulated colloidally stable citrate coated Nfs, of both sizes, in thermosensitive liposomes via extrusion, and RhB was loaded in the lipid bilayer. All formulations proved hemocompatible and cytocompatible. We found that 35 nm Nfs, at lower concentrations than 15 nm Nfs, served better as nanoheaters for magnetic hyperthermia applications. In vitro, magnetic hyperthermia results showed promising therapeutic and imaging potential for RhB loaded magnetoliposomes containing 35 nm Nfs against LLC and CULA cell lines of lung adenocarcinoma.

Nanodelivery of essential oils as efficient tools against antimicrobial resistance: a review of the type and physical-chemical properties of the delivery systems and applications

This review provides a synthesis of the last ten years of research on nanodelivery systems used for the delivery of essential oils (EOs), as well as their potential as a viable alternative to antibiotics in human and veterinary therapy. The use of essential oils alone in therapy is not always possible due to several limitations but nanodelivery systems seem to be able to overcome these issues. The choice of the essential oil, as well as the choice of the nanodelivery system influences the therapeutic efficacy obtained. While several studies on the characterization of EOs exist, this review assesses the characteristics of the nanomaterials used for the delivery of essential oils, as well as impact on the functionality of nanodelivered essential oils, and successful applications. Two classes of delivery systems stand out: polymeric nanoparticles (NPs) including chitosan, cellulose, zein, sodium alginate, and poly(lactic-co-glycolic) acid (PLGA), and lipidic NPs including nanostructured lipid carriers, solid lipid NPs, nanoemulsions, liposomes, and niosomes. While the advantages and disadvantages of these delivery systems and information on stability, release, and efficacy of the nanodelivered EOs are covered in the literature as presented in this review, essential information, such as the speed of emergence of a potential bacteria resistance to these new systems, or dosages for each type of infection and for each animal species or humans is still missing today. Therefore, more quantitative and in vivo studies should be conducted before the adoption of EOs loaded NPs as an alternative to antibiotics, where appropriate.

High throughput onion-like liposome formation with efficient protein encapsulation under flash antisolvent mixing

Achieving a high encapsulation efficiency and loading capacity of proteins in lecithin-based liposomes has always been a challenge. Here, we use Flash Nano-Precipitation (FNP) to produce liposomes and investigated the encapsulation of model protein (Bovine Serum Albumin, BSA). Through rapid turbulent mixing, we obtained liposomes with small size, low polydispersity, and good batch repeatability at a high production rate. We demonstrated that the bilayer of liposomes prepared solely using lecithin was defective, which led to the fusion, and increased size and polydispersity. When cholesterol was added to reach a lecithin-to-cholesterol molar ratio of 5:3, a compact bilayer formed to effectively inhibit liposome fusion. The encapsulation efficiency and loading capacity of BSA was as high as ∼ 68% and ∼ 6% in lecithin-cholesterol liposome, respectively, far exceeding the values reported in the literature. Further study by Quartz Crystal Microbalance with Dissipation (QCM-D) revealed that the highly effective encapsulation was due to the rapid mutual adsorption between BSA and defective/curved lecithin double layers during the liposome formation. Such rapid mutual adsorption leads to the layer-by-layer assembly and formation of onion-like compact liposome structure as revealed by Cryo-TEM. This simple FNP method provides a scalable manufacturing approach for liposomes with efficient protein encapsulation. The revealed adsorption mechanism between protein and lecithin bilayers could also serve as a guide for similar studies.

No Solid Colloidal Carriers: Aspects Thermodynamic the Immobilization Chitinase and Laminarinase in Liposome

The present review describes the basic properties of colloidal and vesicular vehicles that can be used for immobilization of enzymes. The thermodynamic aspects of the immobilization of enzymes (laminarinase and chitinase) in liposomes are discussed. These systems protect enzymes against environmental stress and allow for a controlled and targeted release. The diversity of colloidal and vesicular carriers allows the use of enzymes for different purposes, such as mycolytic enzymes used to control phytopathogenic fungi.

Nano-lipidic formulation and therapeutic strategies for Alzheimer's disease via intranasal route

AIM

The inability of drug molecules to cross the 'Blood-Brain Barrier' restrict the effective treatment of Alzheimer's disease. Lipid nanocarriers have proven to be a novel paradigm in brain targeting of bioactive by facilitating suitable therapeutic concentrations to be attained in the brain.

METHODS

The relevant information regarding the title of this review article was collected from the peer-reviewed published articles. Also, the physicochemical properties, and their in vitro and in vivo evaluations were presented in this review article.

RESULTS

Administration of lipid-based nano-carriers have abilities to target the brain, improve the pharmacokinetic and pharmacodynamics properties of drugs, and mitigate the side effects of encapsulated therapeutic active agents.

CONCLUSION

Unlike oral and other routes, the Intranasal route promises high bioavailability, low first-pass effect, better pharmacokinetic properties, bypass of the systemic circulation, fewer incidences of unwanted side effects, and direct delivery of anti-AD drugs to the brain via circumventing 'Blood-Brain Barrier'.

The Elucidation of the Molecular Mechanism of the Extrusion Process

Extrusion is a popular method for producing homogenous population of unilamellar liposomes. The technique relies on forcing a lipid suspension through cylindrical pores in a polycarbonate membrane. The quantification of the extrusion and/or recalibration processes make possible the acquisition of experimental data, which can be correlated with the mechanical properties of the lipid bilayer. In this work, the force needed for the extrusion process was correlated with the mechanical properties of a lipid bilayer derived from other experiments. Measurements were performed using a home-made dedicated device capable of maintaining a stable volumetric flux of a liposome suspension through well-defined pores and to continuously measure the extrusion force. Based on the obtained results, the correlation between the lipid bilayer bending rigidity and extrusion force was derived. Specifically, it was found that the bending rigidity of liposomes formed from well-defined lipid mixtures agrees with data obtained by others using flicker-noise spectroscopy or micromanipulation. The other issue addressed in the presented studies was the identification of molecular mechanisms leading to the formation of unilamellar vesicles in the extrusion process. Finally, it was demonstrated that during the extrusion, lipids are not exchanged between vesicles, i.e., vesicles can divide but no membrane fusion or lipid exchange between bilayers was detected.

Cross-flow microfiltration for isolation, selective capture and release of liposarcoma extracellular vesicles

We present a resource‐efficient approach to fabricate and operate a micro‐nanofluidic device that uses cross‐flow filtration to isolate and capture liposarcoma derived extracellular vesicles (EVs). The isolated extracellular vesicles were captured using EV‐specific protein markers to obtain vesicle enriched media, which was then eluted for further analysis. Therefore, the micro‐nanofluidic device integrates the unit operations of size‐based separation with CD63 antibody immunoaffinity‐based capture of extracellular vesicles in the same device to evaluate EV‐cargo content for liposarcoma. The eluted media collected showed ∼76% extracellular vesicle recovery from the liposarcoma cell conditioned media and ∼32% extracellular vesicle recovery from dedifferentiated liposarcoma patient serum when compared against state‐of‐art extracellular vesicle isolation and subsequent quantification by ultracentrifugation. The results reported here also show a five‐fold increase in amount of critical liposarcoma‐relevant extracellular vesicle cargo obtained in 30 min presenting a significant advance over existing state‐of‐art.

Physico-chemical studies of elastic compliance and adsorption of DOPC vesicles and its mixture with charged lipids at fluid/solid interface

Lipid bilayer mechanics is crucial to membrane dynamics and in design of liposomes for delivery applications. In this work, vesicles of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) (size from 50 nm to 1 μm) and its mixtures with anionic 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) sodium salt (DOPG) and cationic dimethyldioctadecylammonium bromide (DODAB), have been studied under shear stress at fluid/solid interface and their elastic compliance evaluated. Results show that the rate of spreading of the smaller vesicles (∼70 nm) is about 1.4 times slower than those of larger ones (∼1 μ) and that DOPC has the highest elastic compliance compared with DOPC + DOPG and DOPC + DODAB vesicles. A direct correlation between the elastic compliance and the size of the vesicles shows larger vesicles are more structurally labile during adsorption and subsequent adhesion to solid surfaces than the smaller ones. Specific role of bound water in DODAB is reflected in the lowest elastic compliance of DODAB compared to other lipids. Results show that during the process of adhesion at the fluid/air interface, the vesicles undergo contraction, thereby transmitting mechanical stresses to their microenvironment, which matches the SAXS electron density profiles that indicates larger vesicles have thicker bilayer membranes with larger volume of water compared to the smaller sized ones.