Relationship between stability and flexibility in the most flexible region of Photinus pyralis luciferase

Backbone cyclization of Salmonella typhimurium diaminopropionate ammonia-lyase to enhance the activity and stability

Diaminopropionate ammonia-lyase transforms D and L isomers of 2,3-diaminopropionate to pyruvate and ammonia. It catalyzes D- and l-serine less effectively. L-2,3-diaminopropionate is a precursor in the biosynthesis of oxalyl diaminopropionate as a neurotoxin in certain legume species. In this work, we cyclized the diaminopropionate ammonia-lyase from Salmonella typhimurium in vitro using the redox-responsive split intein, and identified that backbone cyclization afforded the enzyme with the improved activity, thermal stability and resistance to the exopeptidase proteolysis, different from effects of the incorporated sequence recognized by tobacco vein mottling virus protease at C-terminus. Using analyses of three fluorescent dyes including 8-anilino-1-naphthalenesulfonic acid, N-phenyl-1-naphthylamine, and thioflavin T, the same amounts of the cyclic protein displayed less fluorescence than those of the linear protein upon the heat treatment. The cyclic enzyme displayed the enhanced activity in Escherichia coli cells using the designed novel reporter. In this system, d-serine was added to the culture and transported into the cytoplasm. It was transformed by pre-overexpression of the diaminopropionate ammonia-lyase, and untransformed d-serine was oxidized by the coproduced human d-amino acid oxidase to generate hydrogen peroxide. This oxidant is monitored by the HyPer indicator. The current results presented that the cyclized enzyme could be applied as a better candidate to block the neurotoxin biosynthesis in certain plant species.

Label-Free and Bioluminescence-Based Nano-Biosensor for ATP Detection

A bioluminescence-based assay for ATP can measure cell viability. Higher ATP concentration indicates a higher number of living cells. Thus, it is necessary to design an ATP sensor that is low-cost and easy to use. Gold nanoparticles provide excellent biocompatibility for enzyme immobilization. We investigated the effect of luciferase proximity with citrate-coated gold, silver, and gold-silver core-shell nanoparticles, gold nanorods, and BSA-Au nanoclusters. The effect of metal nanoparticles on the activity of luciferases was recorded by the luminescence assay, which was 3-5 times higher than free enzyme. The results showed that the signal stability in presence of nanoparticles improved and was reliable up to 6 h for analytes measurements. It has been suggested that energy is mutually transferred from luciferase bioluminescence spectra to metal nanoparticle surface plasmons. In addition, we herein report the 27-base DNA aptamer for adenosine-5'-triphosphate (ATP) as a suitable probe for the ATP biosensor based on firefly luciferase activity and AuNPs. Due to ATP application in the firefly luciferase reaction, the increase in luciferase activity and improved detection limits may indicate more stability or accessibility of ATP in the presence of nanoparticles. The bioluminescence intensity increased with the ATP concentration up to 600 µM with a detection limit of 5 µM for ATP.

Biosynthetic bifunctional enzyme complex with high-efficiency luciferin-recycling to enhance the bioluminescence imaging

Firefly luciferase is a prominent reporter on molecular imaging with the advantage of longer wavelength on light emission and the ATP linear correlation, which makes it useful in most of current bioluminescence imaging model. However, the utility of this biomaterial was limited by the signal intensity and stability which are respectively affected by enzyme activity and substrate consumption. This study demonstrated a series of novel synthetic bifunctional enzyme complex of Firefly luciferase (Fluc) and Luciferin-regenerating enzyme (LRE). A peptide linker library was constructed for the fusion strategy on biosynthesis. The findings of both experimental data and structural simulation demonstrated that the intervention of fused LRE remarkably improve the stability of in vitro bioluminescence signal through luciferin recycling; and revealed the competitive relationship of Fluc and LRE on luciferin binding: Fluc performed higher activity with one copy number of rigid linker (EAAAK) at the C terminal while LRE acted more efficiently with two copy numbers of flexible linker (GGGGS) at the N terminal. With the advantage of signal intensity and stability, this fused bifunctional enzyme complex may expand the application of firefly luciferase to in vitro bioluminescence imaging.

Comparative functional dynamics studies on the enzyme nano-bio interface

Introduction

Biomedical applications of nanoparticles (NPs) as enzyme inhibitors have recently come to light. Oxides of metals native to the physiological environment (eg, Fe, Zn, Mg, etc.) are of particular interest-especially the functional consequences of their enzyme interaction.

Materials and methods

Here, Fe₂O₃, zinc oxide (ZnO), magnesium oxide (MgO) and nickel oxide (NiO) NPs are compared to copper (Cu) and boron carbide (B₄C) NPs. The functional impact of NP interaction to the model enzyme luciferase is determined by 2-dimensional fluorescence difference spectroscopy (2-D FDS) and 2-dimensional photoluminescence difference spectroscopy (2-D PLDS). By 2-D FDS analysis, the change in maximal intensity and in 2-D FDS area under the curve (AUC) is in the order Cu~B₄C>ZnO>NiO>>Fe₂O₃>MgO. The induced changes in protein conformation are confirmed by tryptic digests and gel electrophoresis.

Results

Analysis of possible trypsin cleavage sites suggest that cleavage mostly occurs in the range of residues 112-155 and 372-439, giving a major 45 kDa band. By 2-D PLDS, it is found that B₄C NPs completely ablate bioluminescence, while Cu and Fe₂O₃ NPs yield a unique bimodal negative decay rate, -7.67×10³ and -3.50×10¹ relative light units respectively. Cu NPs, in particular, give a remarkable 271% change in enzyme activity. Molecular dynamics simulations in water predicted that the surfaces of metal oxide NPs become capped with metal hydroxide groups under physiological conditions, while the surface of B₄C becomes populated with boronic acid or borinic acid groups. These predictions are supported by the experimentally determined zeta potential. Thin layer chromatography patterns further support this conception of the NP surfaces, where stabilizing interactions were in the order ionic>polar>non-polar for the series tested.

Conclusion

Overall the results suggest that B₄C and Cu NP functional dynamics on enzyme biochemistry are unique and should be examined further for potential ramifications on other model, physiological or disease-relevant enzymes.

Fusion expression of bifunctional enzyme complex for luciferin-recycling to enhance the luminescence imaging

Firefly luciferase (Fluc) has been widely used as a bioluminescent monitor. The ATP linear correlation and exogenous luciferin requirement make it useful in most of current imaging systems. However, the utility of this reporter was still limited by the intensity and decay of the luminescent signal, and the active site and structure of enzyme including the relevant substrate channeling region. This study demonstrated a novel construction of bifunctional enzyme system to improve the luminescence generation of firefly luciferase, by bringing in a luciferin-regenerating enzyme (LRE) fusion expressed to the C terminal of luciferase, between which were connected with peptide linker. The fusion protein constructed with typical type of linker, rigid linker (EAAAK) and flexible linker (GGGGS), were analyzed comparing with the unlinked free enzyme. In vivo and in vitro assessment of the bioluminescence intensity and decaying rate to the series of Fluc-LRE enzyme complex were assayed. The fInding demonstrated that the presence of LRE remarkably enhance the generation of luminescence and remained significant stronger signal than that of the control, and the peptide-linked dual enzyme present more stability and continuation on the signal generation and lower decaying rate on signal recession, especially at low dose of Fluc injection. With the advantage of luminescence intensity and reaction period, the peptide mediated fusion expressed LRE may expand the application of Firefly luciferase on bioluminescence imaging.

The Effect of N-Terminal Domain Removal towards the Biochemical and Structural Features of a Thermotolerant Lipase from an Antarctic Pseudomonas sp. Strain AMS3

Lipase plays an important role in industrial and biotechnological applications. Lipases have been subject to modification at the N and C terminals, allowing better understanding of lipase stability and the discovery of novel properties. A thermotolerant lipase has been isolated from Antarctic Pseudomonas sp. The purified Antarctic AMS3 lipase (native) was found to be stable across a broad range of temperatures and pH levels. The lipase has a partial Glutathione-S-transferase type C (GST-C) domain at the N-terminal not found in other lipases. To understand the influence of N-terminal GST-C domain on the biochemical and structural features of the native lipase, the deletion of the GST-C domain was carried out. The truncated protein was successfully expressed in E. coli BL21(DE3). The molecular weight of truncated AMS3 lipase was approximately ~45 kDa. The number of truncated AMS3 lipase purification folds was higher than native lipase. Various mono and divalent metal ions increased the activity of the AMS3 lipase. The truncated AMS3 lipase demonstrated a similarly broad temperature range, with the pH profile exhibiting higher activity under alkaline conditions. The purified lipase showed a substrate preference for a long carbon chain substrate. In addition, the enzyme activity in organic solvents was enhanced, especially for toluene, Dimethylsulfoxide (DMSO), chloroform and xylene. Molecular simulation revealed that the truncated lipase had increased structural compactness and rigidity as compared to native lipase. Removal of the N terminal GST-C generally improved the lipase biochemical characteristics. This enzyme may be utilized for industrial purposes.

Histidine substitution in the most flexible fragments of firefly luciferase modifies its thermal stability

Molecular dynamics (MD) at two temperatures of 300 and 340 K identified two histidine residues, His461 and His489, in the most flexible regions of firefly luciferase, a light emitting enzyme. We therefore designed four protein mutants H461D, H489K, H489D and H489M to investigate their enzyme kinetic and thermodynamic stability changes. Substitution of His461 by aspartate (H461D) decreased ATP binding affinity, reduced the melting temperature of protein by around 25 °C and shifted its optimum temperature of activity to 10 °C. In line with the common feature of psychrophilic enzymes, the MD data showed that the overall flexibility of H461D was relatively high at low temperature, probably due to a decrease in the number of salt bridges around the mutation site. On the other hand, substitution of His489 by aspartate (H489D) introduced a new salt bridge between the C-terminal and N-terminal domains and increased protein rigidity but only slightly improved its thermal stability. Similar changes were observed for H489K and, to a lesser degree, H489M mutations. Based on our results we conclude that the MD simulation-based rational substitution of histidines by salt-bridge forming residues can modulate conformational dynamics in luciferase and shift its optimal temperature activity.

Engineering and introduction of de novo disulphide bridges in organophosphorus hydrolase enzyme for thermostability improvement

The organophosphorus hydrolase (OPH) has been used to degrade organophosphorus chemicals, as one of the most frequently used decontamination methods. Under chemical and thermal denaturing conditions, the enzyme has been shown to unfold. To utilize this enzyme in various applications, the thermal stability is of importance. The engineering of de novo disulphide bridges has been explored as a means to increase the thermal stability of enzymes in the rational method of protein engineering. In this study, Disulphide by Design software, homology modelling and molecular dynamics simulations were used to select appropriate amino acid pairs for the introduction of disulphide bridge to improve protein thermostability. The thermostability of the wild-type and three selected mutant enzymes were evaluated by half-life, delta G inactivation (ΔGi) and structural studies (fluorescence and far-UV CD analysis). Data analysis showed that half-life of A204C/T234C and T128C/E153C mutants were increased up to 4 and 24 min, respectively; however, for the G74C/A78C mutant, the half-life was decreased up to 9 min. For the T128C/E124C mutant, both thermal stability and Catalytic efficiency (kcat) were also increased. The half-life and ΔGi results were correlated to the obtained information from structural studies by circular dichroism (CD) spectrometry and extrinsic fluorescence experiments; as rigidity increased in A204C/T2234C and T128C/E153C mutants, half-life and ΔGi also increased. For G74C/A78C mutant, these parameters decreased due to its higher flexibility. The results were submitted a strong evidence for the possibility to improve the thermostability of OPH enzyme by introducing a disulphide bridge after bioinformatics design, even though this design would not be always successful.

Luciferin-Regenerating Enzyme Crystal Structure Is Solved but its Function Is Still Unclear

Contribution of luciferin-regenerating enzyme (LRE) for in vitro recycling of D-luciferin has been reported. According to crystal structure of LRE, it is a beta-propeller protein which is a type of all β-protein architecture. In this overview, reinvestigation of the luciferase-based LRE assays and its function is reported. Until now, sequence of LRE genes from four different species of firefly has been reported. In spite of previous reports, T-LRE (from Lampyris turkestanicus) was cloned and expressed in Escherichia coli as well as Pichia pastoris in a nonsoluble form as inclusion body. According to recent investigations, bioluminescent signal of soluble T-LRE-luciferase-coupled assay increased and then reached an equilibrium state in the presence of D-cysteine. In addition, the results revealed that both D- and L-cysteine in the absence of T-LRE caused a significant increase in bioluminescence intensity of luciferase over a long time. Based on activity measurements and spectroscopic results, D-cysteine increased the activity of luciferase due to its redox potential and induction of conformational changes in structure and kinetics properties. In conclusion, in spite of previous reports on the effect of LRE (at least T-LRE) on luciferase activity, most of the increase in luciferase activity is caused by direct effect of D-cysteine on structure and activity of firefly luciferase. Moreover, bioinformatics analysis cannot support the presence of LRE in peroxisome of photocytes in firefly lanterns.

Hydrophobin-1 promotes thermostability of firefly luciferase

The thermal sensitivity of firefly luciferase limits its use in certain applications. Firefly luciferase has hydrophobic sites on its surface, which lead to aggregation and inactivation of the enzyme at temperatures over 30 °C. We have successfully stabilized firefly luciferase at high temperatures with the assistance of a unique protein, hydrophobin-1 (HFB1). HFB1 is a small secretory protein belonging to class II of hydrophobins with a low molecular weight (7.5 kDa) and distinct functional hydrophobic patch on its surface. The interaction of HFB1 with hydrophobic sites on the surface of luciferase was confirmed by extrinsic fluorescence studies using 8-anilino-1-naphthalenesulfonic acid (ANS) as a hydrophobic reporter probe. Calculation of thermodynamic parameters of heat inactivation of luciferase shows that conformational changes and flexibility of enzyme decreased in the presence of HFB1, and thermostability of the HFB1-treated enzyme increased. Furthermore, the addition of HFB1 into the enzymatic solution leads to an increase in catalytic efficiency of luciferase and subsequently improves the utility of the enzyme as an ATP detector.

Proposed ionic bond between Arg300 and Glu270 and Glu271 are not involved in inactivation of a mutant firefly luciferase (LRR)

The weakness of firefly luciferase is its rapid inactivation. Many studies have been done to develop thermostable luciferases. One of these modifications was LRR mutant in which the Leu300 was substituted with Arg in the E(354)RR(356)Lampyris turkestanicus luciferase as template. LRR was more thermostable than the wild type but with only 0.02% activity. In this study, site-directed mutagenesis was used to change the proposed ionic bond between the Arg and two neighboring residues (Glu270 and Glu271), to understand if the induced interactions were responsible for inactivation in LRR. Our results showed that substitution of Glu270 and 271 with Ala removed the interactions but the activity of enzyme did not return. The E270A mutant was more active than LRR but the E271A and E270A/E271A mutants were inactive. Fluorescence and CD measurements showed that these mutations were accompanied by conformational changes. Extrinsic fluorescence measurement and obtained quenching data by KI and acrylamide also confirmed that the mutants were less compact than the LRR enzyme. In conclusion, in LRR, the interactions between Arg300 and Glu270 and Glu271 were not responsible for the enzyme inactivation and it is proposed that the enzyme inactivation is due to conformational changes of LRR mutant of firefly luciferase.

The Effect of Surface Charge Saturation on Heat-induced Aggregation of Firefly Luciferase

We present here the effect of firefly luciferase surface charge saturation and the presence of some additives on its thermal-induced aggregation. Three mutants of firefly luciferase prepared by introduction of surface Arg residues named as 2R, 3R and 5R have two, three and five additional arginine residues substituted at their surface compared to native luciferase; respectively. Turbidimetric study of heat-induced aggregation indicates that all three mutants were reproducibly aggregated at higher rates relative to wild type in spite of their higher thermostability. Among them, 2R had most evaluated propensity to heat-induced aggregation. Therefore, the hydrophilization followed by appearing of more substituted arginine residues with positive charge on the firefly luciferase surface was not reduced its thermal aggregation. Nevertheless, at the same condition in the presence of charged amino acids, e.g. Arg, Lys and Glu, as well as a hydrophobic amino acid, e.g. Val, the heat-induced aggregation of wild type and mutants of firefly luciferases was markedly decelerated than those in the absence of additives. On the basis of obtained results it seems, relinquishment of variety in charge of amino acid side chains, they via local interactions with proteins cause to decrease rate and extent of their thermal aggregation.

The role of proline substitutions within flexible regions on thermostability of luciferase

Improving the stability of firefly luciferase has been a critical issue for its wider industrial applications. Studies about hyperthermophile proteins show that flexibility could be an effective indicator to find out weak spots to engineering thermostability of proteins. However, the relationship among flexibility, activity and stability in most of proteins is unclear. Proline is the most rigid residue and can be introduced to rigidify flexible regions to enhance thermostability of proteins. We firstly apply three different methods, molecular dynamics (MD) simulation, B-FITTER and framework rigidity optimized dynamics algorithm (FRODA) to determine the flexible regions of Photinus pyralis luciferase: Fragment 197-207; Fragment 471-481 and Fragment 487-495. Then, introduction of proline is used to rigidify these flexible regions. Two mutants D476P and H489P within most flexible regions are finally designed. In the results, H489P mutant shows improved thermostability while maintaining its catalytic efficiency compared to that of wild type luciferase. Flexibility analysis confirms that the overall rigidity and local rigidity of H489P mutant are greatly strengthened. D476P mutant shows decreased thermosatbility and the reason for this is elucidated at the molecular level. S307P mutation is randomly chosen outside the flexible regions as a control. Thermostability analysis shows that S307P mutation has decreased kinetic stability and enhanced thermodynamic stability.

Simplicity within the complexity: bilateral impact of DMSO on the functional and unfolding patterns of α-chymotrypsin

New understanding of the fundamental links between protein stability, conformational flexibility and function, can be gained through synergic studies on their catalytic and folding/unfolding properties under the influence of stabilizing/destabilizing additives. We explored an impact of dimethyl sulfoxide (DMSO), the moderate effector of multilateral action, on the kinetic (functional) and thermodynamic (thermal unfolding) patterns of a hydrolytic enzyme, α-chymotrypsin (α-CT), over a wide range of additive concentrations, 0-70% (v/v). Both the calorimetric and kinetic data exhibited rich behavior pointing to the complex interplay of global/local stability (and flexibility) patterns. The complex action of DMSO is explained through the negative and positive preferential solvation motifs that prevail for the extreme opposite, native-like and unfolded states, respectively, implying essential stabilization of compact domains by enhancement of interfacial water networks and destabilization of a flexible active site by direct binding of DMSO to the unoccupied specific positions intended for elongated polypeptide substrates.

Biophysical characterization of two different stable misfolded monomeric polypeptides that are chaperone-amenable substrates

Misfolded polypeptide monomers may be regarded as the initial species of many protein aggregation pathways, which could accordingly serve as primary targets for molecular chaperones. It is therefore of paramount importance to study the cellular mechanisms that can prevent misfolded monomers from entering the toxic aggregation pathway and moreover rehabilitate them into active proteins. Here, we produced two stable misfolded monomers of luciferase and rhodanese, which we found to be differently processed by the Hsp70 chaperone machinery and whose conformational properties were investigated by biophysical approaches. In spite of their monomeric nature, they displayed enhanced thioflavin T fluorescence, non-native β-sheets, and tertiary structures with surface-accessible hydrophobic patches, but differed in their conformational stability and aggregation propensity. Interestingly, minor structural differences between the two misfolded species could account for their markedly different behavior in chaperone-mediated unfolding/refolding assays. Indeed, only a single DnaK molecule was sufficient to unfold by direct clamping a misfolded luciferase monomer, while, by contrast, several DnaK molecules were necessary to unfold the more resistant misfolded rhodanese monomer by a combination of direct clamping and cooperative entropic pulling.

Delicate balance of electrostatic interactions and disulfide bridges in thermostability of firefly luciferase

The wild type Photinus pyralis luciferase does not have any disulfide bridge. Disulfide bridges are determinant in inherent stability of protein at moderate temperatures. Meanwhile, arginin is responsible for thermostability at higher temperatures. In this study, by concomitant introduction of disulfide bridge and a surface arginin in a mutant (A296C-A326C/I232R), the contribution of disulfide bridge introduction and surface hydrophilic residue on activity and global stability of P. pyralis luciferase is investigated. In addition to the mentioned mutant; I232R, A296C-A326C and wild type luciferases are characterized. Though addition of Arg caused stability against proteolysis but in combination with disulfide bridge resulted in decreased thermal stability compared to A296C-A326C mutant. In spite of long distance of two different mutations (A296C-A326C and I232R) from each other in the three-dimensional structure, combination of their effects on the stability of luciferase was not cumulative.