Fabrication and properties of βTCP/Zeolite/Gelatin scaffold as developed scaffold in bone regeneration: in vitro and in vivo studies

The Complementary Roles of Neurological and Musculoskeletal Physical Therapy and Regenerative Medicine: A Comprehensive Review

Regenerative medicine, encompassing various therapeutic approaches aimed at tissue repair and regeneration, has emerged as a promising field in the realm of physical therapy. Aim: This comprehensive review seeks to explore the evolving role of regenerative medicine within the domain of physical therapy, highlighting its potential applications, challenges, and current trends. Researchers selected publications of pertinent studies from 2015 to 2024 and performed an exhaustive review of electronic databases such as PubMed, Embase, and Google Scholar using the targeted keywords "regenerative medicine", "rehabilitation", "tissue repair", and "physical therapy" to screen applicable studies according to preset parameters for eligibility, then compiled key insights from the extracted data. Several regenerative medicine methods that are applied in physical therapy, in particular, stem cell therapy, platelet-rich plasma (PRP), tissue engineering, and growth factor treatments, were analyzed in this research study. The corresponding efficacy of these methods in the recovery process were also elaborated, including a discussion on facilitating tissue repair, alleviating pain, and improving functional restoration. Additionally, this review reports the challenges concerning regenerative therapies, among them the standardization of protocols, safety concerns, and ethical issues. Regenerative medicine bears considerable potential as an adjunctive therapy in physiotherapy, providing new pathways for improving tissue repair and functional results. Although significant strides have been made in interpreting the potential of regenerative techniques, further research is warranted to enhance protocols, establish safety profiles, and increase access and availability. Merging regenerative medicine into the structure of physical therapy indicates a transformative alteration in clinical practice, with the benefit of increasing patient care and improving long-term results.

Fabrication and characterization of a bioactive composite scaffold based on polymeric collagen/gelatin/nano β-TCP for alveolar bone regeneration

One strategy to correct alveolar bone defects is use of bioactive bone substitutes to maintain the structure of defect site and facilitate cells and vessels' ingrowth. This study aimed to fabricate and characterize the freeze-dried bone regeneration scaffolds composed of polymeric Type I collagen, nano Beta-tricalcium phosphate (β-TCP), and gelatin. The stable structures of scaffolds were obtained by thermal crosslinking and EDC/NHS ((1-ethyl-3-(3-dimethylaminopropyl) carbodiimide)/(N-hydroxysuccinimide)) chemical crosslinking processes. Subsequently, the physicochemical and biological properties of the scaffolds were characterized and assessed. The results indicated the bioactive composite scaffolds containing 10% and 20% (w/v) nano β-TCP exhibited suitable porosity (84.45 ± 25.43 nm, and 94.51 ± 14.69 nm respectively), a rapid swelling property (reaching the maximum swelling rate at 1 h), excellent degradation resistance (residual mass percentage of scaffolds higher than 80% on day 90 in PBS and Type I collagenase solution respectively), and sustained calcium release capabilities. Moreover, they displayed outstanding biological properties, including superior cell viability, cell adhesion, and cell proliferation. Additionally, the scaffolds containing 10% and 20% (w/v) nano β-TCP could promote the osteogenic differentiation of MC3T3-E1. Therefore, the bioactive composite scaffolds containing 10% and 20% (w/v) nano β-TCP could be further studied for being used to treat alveolar bone defects in vivo.

In vivo assessment of marine vs bovine origin collagen-based composite scaffolds promoting bone regeneration in a New Zealand rabbit model

The ability of human tissues to self-repair is limited, which motivates the scientific community to explore new and better therapeutic approaches to tissue regeneration. The present manuscript provides a comparative study between a marine-based composite biomaterial, and another composed of well-established counterparts for bone tissue regeneration. Blue shark skin collagen was combined with bioapatite obtained from blue shark's teeth (mColl:BAp), while bovine collagen was combined with synthetic hydroxyapatite (bColl:Ap) to produce 3D composite scaffolds by freeze-drying. Collagens showed similar profiles, while apatite particles differed in their composition, being the marine bioapatite a fluoride-enriched ceramic. The marine-sourced biomaterials presented higher porosities, improved mechanical properties, and slower degradation rates when compared to synthetic apatite-reinforced bovine collagen. The in vivo performance regarding bone tissue regeneration was evaluated in defects created in femoral condyles in New Zealand rabbits twelve weeks post-surgery. Micro-CT results showed that mColl:BAp implanted condyles had a slower degradation and an higher tissue formation (17.9 ± 6.9 %) when compared with bColl:Ap implanted ones (12.9 ± 7.6 %). The histomorphometry analysis provided supporting evidence, confirming the observed trend by quantifying 13.1 ± 7.9 % of new tissue formation for mColl:BAp composites and 10.4 ± 3.2 % for bColl:Ap composites, suggesting the potential use of marine biomaterials for bone regeneration.

In Vitro Effects of Zirconia Nanoparticles: Uptake, Genotoxicity, and Mutagenicity in V-79 cells

Zirconia nanoparticles are used in various industrial and biomedical applications such as dental implants, thermal barrier sprays, and fuel cells. The interaction of nanoparticles with the environment and humans is inevitable. Despite the enormous application potential of these nanoparticles, there are still some gaps in the literature regarding potential toxicological mechanisms and the genotoxicity of zirconia nanoparticles. The lung is one of the main exposure routes to nanomaterials; therefore, the present study was designed to determine the genotoxic and mutagenic effect of zirconia NPs in V-79 lung cells. Zirconia nanoparticles showed significant internalization in cells at 100 μg/mL and 150 μg/mL concentrations. Zirconia nanoparticles showed low cytotoxicity and were found to generate ROS in V-79 cells. In alkaline comet assay, zirconia nanoparticles (10 μg/mL, 50 μg/mL, and 100 μg/mL) exposed cells exhibited significant DNA strand breaks, while the neutral comet assay, which was used for double-strand break assessment, only revealed significant damage at 100 μg/mL. Chromosomal aberration induced by zirconia nanoparticles mainly resulted in the generation of gaps, few fragments, and breaks which signifies the low clastogenic activity of these nanoparticles in the V-79 cell line. In MN assay, zirconia nanoparticles resulted in no significant micronuclei induction at any given concentration. In the HPRT mutation assay, the particle shows a dose-dependent increase in the mutant frequency. It is evident from the result that zirconia nanoparticles cause dose-dependent cytotoxicity and genotoxicity, but still, more studies are needed to evaluate the clastogenic potential and the possible mechanism involved.

Exploring the Use of Animal Models in Craniofacial Regenerative Medicine: A Narrative Review

The craniofacial region contains skin, bones, cartilage, the temporomandibular joint (TMJ), teeth, periodontal tissues, mucosa, salivary glands, muscles, nerves, and blood vessels. Applying tissue engineering therapeutically helps replace lost tissues after trauma or cancer. Despite recent advances, it remains essential to standardize and validate the most appropriate animal models to effectively translate preclinical data to clinical situations. Therefore, this review focused on applying various animal models in craniofacial tissue engineering and regeneration. This research was based on PubMed, Scopus, and Google Scholar data available until January 2023. This study included only English-language publications describing animal models' application in craniofacial tissue engineering (in vivo and review studies). Study selection was based on evaluating titles, abstracts, and full texts. The total number of initial studies was 6454. Following the screening process, 295 articles remained on the final list. Numerous in vivo studies have shown that small and large animal models can benefit clinical conditions by assessing the efficacy and safety of new therapeutic interventions, devices, and biomaterials in animals with similar diseases/defects to humans. Different species' anatomical, physiologic, and biological features must be considered in developing innovative, reproducible, and discriminative experimental models to select an appropriate animal model for a specific tissue defect. As a result, understanding the parallels between human and veterinary medicine can benefit both fields.

The current applications of nano and biomaterials in drug delivery of dental implant

BACKGROUND AND AIM

Dental implantology has revolutionized oral rehabilitation, offering a sophisticated solution for restoring missing teeth. Despite advancements, issues like infection, inflammation, and osseointegration persist. Nano and biomaterials, with their unique properties, present promising opportunities for enhancing dental implant therapies by improving drug delivery systems. This review discussed the current applications of nano and biomaterials in drug delivery for dental implants.

METHOD

A literature review examined recent studies and advancements in nano and biomaterials for drug delivery in dental implantology. Various materials, including nanoparticles, biocompatible polymers, and bioactive coatings, were reviewed for their efficacy in controlled drug release, antimicrobial properties, and promotion of osseointegration.

RESULTS

Nano and biomaterials exhibit considerable potential in improving drug delivery for dental implants. Nanostructured drug carriers demonstrate enhanced therapeutic efficacy, sustained release profiles, and improved biocompatibility. Furthermore, bioactive coatings contribute to better osseointegration and reduced risks of infections.

CONCLUSION

Integrating current nano and biomaterials in drug delivery for dental implants holds promise for advancing clinical outcomes. Enhanced drug delivery systems can mitigate complications associated with dental implant procedures, offering improved infection control, reduced inflammation, and optimized osseointegration.

Preparation, properties and in vitro osteogensis of self-reinforcing injectable hydrogel

As an attractive biomaterial for bone reconstruction, injectable biomaterials have many prominent characteristics such as good biocompatibility and bone-filling ability. However, there are weak as load-bearing scaffolds. In this study, polyvinyl alcohol (PVA) and bioactive glass (BAG) were interpenetrated into sodium alginate (SA) network to obtain self-enhanced injectable hydrogel. The optimum ratio of PVA/SA/BAG hydrogel was determined based on injectability, gelation time and chemical characterization. Results showed that the selected ratio had the shortest gelation time of 3.5min, and the hydrogel had a rough surface and good coagulation property. The hydrogel was capable of carrying 1kg of weight by mineralization for 14 d The compressive strength, compressive modulus, and fracture energy of the hydrogel reached 0.12MPa, 0.376MPa and 17.750kJ m-2, respectively. Meanwhile, the hydrogel had high moisture content and dissolution rate, and it was sensitive to temperature and ionic strength. Hydroxyapatite was generated on the hydrogel surface, and the hydrogel pores increased, and the pore size enlarged. The biocompatibility of PVA/SA/BAG hydrogel was analyzed using hemolysis and cytotoxicity assays. Results revealed its good biocompatibility with low hemolysis rate and no cytotoxicity to MC3T3-E1 cells. The hydrogel was also found to promote the differentiation of MC3T3-E1 cells with significantly increased in ALP activity and expression of relevant differentiation factors. In vitro mineralization assay showed an increase in calcium nodules and calcification area, indicating the ability of hydrogel to promote mineralization MC3T3-E1 cells. These findings indicated that PVA/SA/BAG hydrogel had potential uses in the field of irregular bone-defect repair due to its injectability, cytocompatibility, and tailorable functionality.

Investigating the effect of insertion torque on marginal bone loss around dental implants

BACKGROUND/PURPOSE

The use of dental implants in restoring function, esthetics, speech, and health of oral tissues has been growing in recent years. Evaluating marginal bone resorption and the survival rate of implants placed with different torques values is crucial. The primary aim of the present study was to evaluate the effect of different insertion torque values on marginal bone loss around dental implants placed in the posterior region of the mandible.

MATERIALS AND METHODS

37 patients were involved in this study. Patient data (age, gender), implant characteristics (length, diameter), insertion torque values, gingival biotype, and bone quality were recorded, and parallel periapical radiographs measured marginal bone loss. The relationship between variables was obtained using independent t-tests, Pearson correlations, and regressions.

RESULTS

The present study found a positive and significant correlation between implant insertion torque and marginal bone loss (MBL)around the dental implants during the first year after placement. Furthermore, patients with D2 bone density at the implant placement site and thin gingival biotype also had significantly higher MBLs from baseline until crown delivery and first-year follow-up than those with D3 bone density and thick gingival biotypes, respectively.

CONCLUSION

A lower torque is necessary for high-risk patients to increase implantation success due to identifying patients with an increased risk for MBL.

The effect of photodynamic therapy in controlling the oral biofilm: A comprehensive overview

Several resistance mechanisms are involved in dental caries, including oral biofilms. An accumulation of bacteria on the surface of teeth is called plaque. Periodontitis and gingivitis are caused by dental plaque. In this review article, we aimed to review the studies associated with the application of photodynamic therapy (PDT) to prevent and treat various microbial biofilm-caused oral diseases in recent decades. There are several studies published in PubMed that have described antimicrobial photodynamic therapy (APDT) effects on microorganisms. Several in vitro and in vivo studies have demonstrated the potential of APDT for treating endodontic, periodontal, and mucosal infections caused by bacteria as biofilms. Reactive oxygen species (ROS) are activated in the presence of oxygen by integrating a nontoxic photosensitizer (PS) with appropriate wavelength visible light. By causing irreversible damage to microorganisms, ROS induces some biological and photochemical events. Testing several wavelengths has been conducted to identify potential PS for APDT. A standard protocol is not yet available, and the current review summarizes findings from dental studies on APDT.

An injectable and thermosensitive hydrogel with nano-aided NIR-II phototherapeutic and chemical effects for periodontal antibacteria and bone regeneration

Periodontitis is a common public health problem worldwide and an inflammatory disease with irregular defect of alveolar bone caused by periodontal pathogens. Both antibacterial therapy and bone regeneration are of great importance in the treatment of periodontitis. In this study, injectable and thermosensitive hydrogels with 3D networks were used as carriers for controlled release of osteo-inductive agent (BMP-2) and Near Infrared Region-II (NIR-II) phototherapy agents (T8IC nano-particles). T8IC nano-particles were prepared by reprecipitation and acted as photosensitizer under 808 nm laser irradiation. Besides, we promoted photodynamic therapy (PDT) through adding H2O2 to facilitate the antibacterial effect instead of increasing the temperature of photothermal therapy (PTT). Hydrogel + T8IC + Laser + BMP-2 + H2O2 incorporated with mild PTT (45 °C), enhanced PDT and sustained release of BMP-2. It was present with excellent bactericidal effect, osteogenic induction and biosafety both in vitro and in vivo. Besides, immunohistochemistry staining and micro-CT analyses had confirmed that PTT and PDT could promote bone regeneration through alleviating inflammation state. Altogether, this novel approach with synergistic antibacterial effect, anti-inflammation and bone regeneration has a great potential for the treatment of periodontitis in the future.

The effect of green synthesis of TiO2 nanoparticles/collagen/HA scaffold in bone regeneration: As an animal study

BACKGROUND

The bone defects cannot heal by themselves when their range exceeds the critical size defect (CSD). In clinical treatment, significant bone defects are often caused by trauma, developmental deformity, tumour resection and infection.

OBJECTIVES

The purpose of this study was to investigate the effect of green synthesis of TiO2 from propolis extract/collagen/HA (Hydroxyapatite) scaffolds on bone regeneration in rats.

METHODS

Water uptake, biodegradability, porosity and biodegradation of the scaffolds were evaluated after they were synthesised using freeze-dry method. Cell viability by MTT assay was then evaluated. During the 4, 8 and 12 weeks following the scaffold implantation, the bone regeneration was evaluated using macroscopic and microscopic tests to determine the effectiveness of green synthesis of TiO2 from propolis extract/collagen/HA scaffolds.

RESULTS

Compared to the HA/Coll scaffold, ProTiO2 /HA/Coll scaffold was reduced porosity, water absorption and degradability porosity. Based on in vitro tests, both synthetic scaffolds induced cell growth and were less toxic and stimulated cell growth. Based on histopathological testing, the ProTiO2 /HA/Coll scaffolds formed high levels of bone during 12 weeks in comparison with HA/Coll and control group.

CONCLUSIONS

ProTiO2 /HA/Coll composite can be used in regenerative medicine, bone fillers and scaffolds. As a result, this research suggests that ProTiO2 /HA/Coll composites could be promising candidates for bone regeneration.

Evaluation of bioactivity and biodegradability of a biomimetic soft tissue scaffold for clinical use: An in vitro study

Background

Autogenous soft-tissue graft is the gold-standard approach to augment oral soft tissues. However, tissue engineering is increasingly surveyed to overcome its substantial drawbacks, including the secondary site of operation, patient's pain and discomfort, limited tissue of donor site, and so on. Chitosan and gelatin have been utilized in this field over the years due to their great biological virtues. Zeolite, another remarkable candidate for tissue engineering, possesses outstanding biological and mechanical properties, thanks to its nanostructure. Therefore, this study aimed to investigate the biodegradability and DNA content of seeded human gingival fibroblasts on a New Chitosan-Gelatin-Zeolite Scaffold for the perspective of oral and mucosal soft tissue augmentation.

Materials and Methods

DNA contents of the human gingival fibroblast cell line (HGF.1) seeded on the chitosan-gelatin (CG) and CGZ scaffolds were evaluated by propidium iodide staining on days 1, 5, and 8. Scaffolds' biodegradations were investigated on days 1, 7, 14, 28, 42, and 60.

Results

Although both scaffolds provided appropriate substrates for HGF.1 growth, significantly higher DNA contents were recorded for the CGZ scaffold. Among experimental groups, the highest mean value was recorded in the CGZ on day 8. CGZ showed a significantly lower biodegradation percentage at all time points.

Conclusions

The incorporation of zeolite into the CG scaffold at a ratio of 1:10 improved the cell proliferation and stability of the composite scaffold. CGZ scaffold may offer a promising alternative to soft-tissue grafts due to its suitable biological features.

The effects of Kinesio tapes on facial swelling following bimaxillary orthognathic surgery in the supraclavicular region

BACKGROUND

Several osteotomies are required for orthognathic surgery to reposition the jaws correctly. This study aimed to evaluate whether Kinesiotaping can reduce swelling, pain, and trismus following orthognathic surgery of the facial skull.

MATERIALS AND METHODS

The present study consists of two phases. In the split-mouth phase, 16 skeletal class III patients underwent Bimax Orthognathic surgery, and Kinesiological tape (KT) was applied on one half of the face. In the prospective case-control phase, 30 patients were divided into two groups. Kinesio tape was applied on both sides of the face of the Kinesio group, and pressure dressing and ice therapy were used for the second group. The tape was parallel to the lower border of the mandible along its entire length, tangent to the labial commissure area on the studied side. The tape was placed in place for 5 days. Edema was evaluated by measuring the distance from the menton to the lower edge of the tragus. The maximum mouth-opening trismus was evaluated, and the VAS index was used to evaluate pain.

RESULTS

There was evidence of swelling reduction after KT; within the same study, differences between the left and right sides as well as for the same side were statistically significant (p < 0.001). As a result of tapping lymphatic Kinesio tape on the affected area, tension was reduced, and lymphatic circulation was restored. Blood and lymph microcirculation was improved, enabling the body to heal itself.

CONCLUSION

Kinesio tape reduced swelling after orthognathic surgery in a positive way. As a simple, non-traumatic, economical method, Kinesio taping seems promising.

Additive manufacturing of sustainable biomaterials for biomedical applications

Biopolymers are promising environmentally benign materials applicable in multifarious applications. They are especially favorable in implantable biomedical devices thanks to their excellent unique properties, including bioactivity, renewability, bioresorbability, biocompatibility, biodegradability and hydrophilicity. Additive manufacturing (AM) is a flexible and intricate manufacturing technology, which is widely used to fabricate biopolymer-based customized products and structures for advanced healthcare systems. Three-dimensional (3D) printing of these sustainable materials is applied in functional clinical settings including wound dressing, drug delivery systems, medical implants and tissue engineering. The present review highlights recent advancements in different types of biopolymers, such as proteins and polysaccharides, which are employed to develop different biomedical products by using extrusion, vat polymerization, laser and inkjet 3D printing techniques in addition to normal bioprinting and four-dimensional (4D) bioprinting techniques. This review also incorporates the influence of nanoparticles on the biological and mechanical performances of 3D-printed tissue scaffolds. This work also addresses current challenges as well as future developments of environmentally friendly polymeric materials manufactured through the AM techniques. Ideally, there is a need for more focused research on the adequate blending of these biodegradable biopolymers for achieving useful results in targeted biomedical areas. We envision that biopolymer-based 3D-printed composites have the potential to revolutionize the biomedical sector in the near future.

Zeolites as Ingredients of Medicinal Products

Development of new medicinal products for particular therapeutic treatment or for better manipulations with better quality and less side effects are possible as a result of advanced inorganic and organic materials application, among which zeolites, due to their properties and versatility, have been gaining attention. This paper is an overview of the development in the use of zeolite materials and their composites and modifications as medicinal products for several purposes such as active agents, carriers, for topical treatments, oral formulations, anticancer, the composition of theragnostic systems, vaccines, parenteral dosage forms, tissue engineering, etc. The objective of this review is to explore the main properties of zeolites and associate them with their drug interaction, mainly addressing the advances and studies related to the use of zeolites for different types of treatments due to their zeolite characteristics such as molecule storage capacity, physical and chemical stability, cation exchange capacity, and possibility of functionalization. The use of computational tools to predict the drug-zeolite interaction is also explored. As conclusion was possible to realize the possibilities and versatility of zeolite applications as being able to act in several aspects of medicinal products.

The Effect of Cytotoxicity and Antimicrobial of Synthesized CuO NPs from Propolis on HEK-293 Cells and Lactobacillus acidophilus

Background

Drug resistance is currently possible anywhere in the world. Due to the discovery of antimicrobials, medicine, and health have made tremendous advances over the past several decades.

Aim

This research evaluated the antimicrobial and cytotoxicity effects of green synthesis of copper oxide nanoparticles (CuO NPs) on Lactobacillus acidophilus and human embryonic kidney 293 cells (HEK). Method and Materials. Propolis was sampled and extracted. Green synthesis of CuO NPs was synthesized and characterized using SEM, TEM, DLS, BET, and zeta potential methods. L. acidophilus (ATCC 4356) was used, and the antimicrobial tests were carried out at different concentrations (10≥ mg/ml). Moreover, the cytotoxicity was evaluated using an MTT assay on human embryonic kidney 293 cells (HEK).

Results

Synthesized CuO NPs using propolis extracts from Khalkhal (sample 1) and Gillan (sample 2) showed -13.2 and -14.4 mV, respectively. The hydrodynamic sizes of well-dispersed samples 1 and 2 were 3124.9 nm and 1726.7 nm, respectively. According to BET analysis, samples 1 and 2 had 5.37 and 8.45 m²/g surface area, respectively. The surface area was decreased due to the addition of propolis extract, and the pore size was increased. CuO NPs of samples 1 and 2 were visible on SEM images with diameters ranging from 75 to 145 nm and 120 to 155 nm, respectively. Based on TEM analysis, the size of CuO particles was increased in samples 1 and 2. CuO NPs particles had narrow size distributions with evenly dispersed NPs on all sides. The cell viability of the CuO NPs of samples 1 and 2 after 24, 48, and 72 hours was greater than 50%. As a result of the MIC and MBC tests, it was determined that samples 1 and 2 had the same effect against L. acidophilus (0.0024 mg/ml). Biofilm formation and degradation of sample 1 were more efficient against L. acidophilus.

Conclusion

There was no evidence of cytotoxicity in the samples. In addition, results showed that the green synthesized CuO NPs from Khalkhal propolis were effective against L. acidophilus. Thus, the green synthesized CuO NPs from Khalkhal propolis were the best candidates for clinical application.

The current regenerative medicine approaches of craniofacial diseases: A narrative review

Craniofacial deformities (CFDs) develop following oncological resection, trauma, or congenital disorders. Trauma is one of the top five causes of death globally, with rates varying from country to country. They result in a non-healing composite tissue wound as they degenerate in soft or hard tissues. Approximately one-third of oral diseases are caused by gum disease. Due to the complexity of anatomical structures in the region and the variety of tissue-specific requirements, CFD treatments present many challenges. Many treatment methods for CFDs are available today, such as drugs, regenerative medicine (RM), surgery, and tissue engineering. Functional restoration of a tissue or an organ after trauma or other chronic diseases is the focus of this emerging field of science. The materials and methodologies used in craniofacial reconstruction have significantly improved in the last few years. A facial fracture requires bone preservation as much as possible, so tiny fragments are removed initially. It is possible to replace bone marrow stem cells with oral stem cells for CFDs due to their excellent potential for bone formation. This review article discusses regenerative approaches for different types of craniofacial diseases.

The wound healing effect of collagen/adipose-derived stem cells (ADSCs) hydrogel: In vivo study

BACKGROUND

The complex wound healing process involves activating and synchronizing intracellular, intercellular, and extracellular components. Adipose tissue is attracting attention to promote wound healing. Within subcutaneous adipose tissue, stromal vascular cells and their subsets release growth factors and cytokines critical for neovascularization and wound repair.

OBJECTIVES

This study evaluated human placental collagen/adipose-derived stem cells (ADSCs) hydrogel for wound healing in rats.

METHODS

In this study, ADSCs were harvested, cultured, and mixed with placental collagen. Twelve rats were used, and their backs were excised three times each. Group one received collagen/ADSCs, group two collagen, and group three non-filled (control) excisions. The healing processes were assessed by histological analysis, taking photographs, and calculating the percentage of wound contraction in mentioned times.

RESULTS

Histopathological analysis revealed that the content of fibroblasts, follicles of the hair, and angiogenesis in group one was significantly more than in other groups. Group one had a significant result compared with the collagen and control groups. In group one, significant wound healing and wound contraction were observed with 52% and 80% wound contraction at 7 and 14 days, respectively.

CONCLUSION

Collagen/ADSCs can be considered a suitable candidate hydrogel in wound healing with a high potential for enhancing wound repairing.

Preparation and sustained-release properties of poly(lactic acid)/graphene oxide porous biomimetic composite scaffolds loaded with salvianolic acid B

Biomimetic scaffolds loaded with drugs can improve the osteogenesis and neovascularisation of scaffolds. A series of PLA/GO/Sal-B drug-loaded scaffolds was prepared by thermally induced phase separation. The addition of Sal-B increased the diameter of the fibres, but the scaffold showed a porous nanofibrous structure after drug release. X-ray diffraction results showed that the addition of Sal-B did not affect the formation of the nanofibre biomimetic structure of the scaffold. FTIR results indicated a certain interaction between Sal-B and PLA/GO. Water absorption and porosity test results revealed that the scaffolds had good hydrophilicity and appropriate porosity. The addition of Sal-B was also conducive to the formation of sediments possibly due to the good water solubility of Sal-B itself. The prepared scaffolds had good blood compatibility and cytocompatibility, and a small additional amount of Sal-B could significantly promote cell proliferation and alkaline phosphatase activity. Their sustained release performance indicated that the biomimetic scaffolds had controlled the release of Sal-B. The kinetic model showed that the PLA/GO/Sal-B drug-loaded biomimetic scaffolds followed the diffusion mechanism.

Comparison of engineered cartilage based on BMSCs and chondrocytes seeded on PVA-PPU scaffold in a sheep model

In this study, polyvinyl alcohol hydrogel chains were crosslinked by polyurethane in order to synthesize a suitable substrate for cartilage lesions. The substrate was fully characterized, and in vitro and in vivo investigations were conducted based on a sheep model. In vitro tests were performed based on the chondrocyte cells with the Alcian Blue and safranin O staining in order to prove the presence of proteoglycan on the surface of the synthesized substrate, which has been secreted by cultures of chondrocytes. Furthermore, the expression of collagen type I, collagen type II, aggrecan, and Sox9 was presented in the chondrocyte cultures on the synthesized substrate through RT-PCR. In addition, the H&E analysis and other related tests demonstrated the formation of neocartilage tissue in a sheep model. The results were found to be promising for cartilage tissue engineering and verified that the isolated chondrocyte cultures on the synthesized substrate retain their original composition.

Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds

The repair of large-area irregular bone defects is one of the complex problems in orthopedic clinical treatment. The bone repair scaffolds currently studied include electrospun membrane, hydrogel, bone cement, 3D printed bone tissue scaffolds, etc., among which 3D printed polymer-based scaffolds Bone scaffolds are the most promising for clinical applications. This is because 3D printing is modeled based on the im-aging results of actual bone defects so that the printed scaffolds can perfectly fit the bone defect, and the printed components can be adjusted to promote Osteogenesis. This review introduces a variety of 3D printing technologies and bone healing processes, reviews previous studies on the characteristics of commonly used natural or synthetic polymers, and clinical applications of 3D printed bone tissue scaffolds, analyzes and elaborates the characteristics of ideal bone tissue scaffolds, from t he progress of 3D printing bone tissue scaffolds were summarized in many aspects. The challenges and potential prospects in this direction were discussed.

Dental Radiographic/Digital Radiography Technology along with Biological Agents in Human Identification

The heavy casualties associated with mass disasters necessitate substantial resources to be managed. The unexpectedly violent nature of such occurrences usually remains a problematic amount of victims that urgently require to be identified by a reliable and economical method. Conventional identification methods are inefficient in many cases such as plane crashes and fire accidents that have damaged the macrobiometric features such as fingerprints or faces. An appropriate recognition method for such cases should use features more resistant to destruction. Forensic dentistry provides the most appropriate available method for the successful identification of victims using careful techniques and precise data interpretation. Since bones and teeth are the most persistent parts of the demolished bodies in sudden mass disasters, scanning and radiographs are unrepeatable parts of forensic dentistry. Forensic dentistry as a scientific method of human remain identification has been considerably referred to be efficient in disasters. Forensic dentistry can be used for either "sex and age estimation," "Medical biotechnology techniques," or "identification with dental records," etc. The present review is aimed at discussing the development and implementation of forensic dentistry methods for human identification. For this object, the literature from the last decade has been searched for the innovations in forensic dentistry for human identification based on the PubMed database.

Evaluation and comparison of synthesised hydroxyapatite in bone regeneration: As an in vivo study

Objectives

Many patients suffer from non-repaired bone defects and subsequent aesthetic and psychological problems following bone fractures from accidents. The main goal of the study was to compare and evaluate synthetic hydroxyapatite with xenograft and commercial hydroxyapatite for bone repair and reconstruction.

Methods

In this study, synthetic hydroxyapatite was fabricated and verified. Cytotoxicity tests (i.e., induction coupled plasma [ICP], density and porosity analysis, scanning electron microscope [SEM] analysis, and thiazolyl blue tetrazolium blue [MTT] assay) were performed. Synthetic, xenograft, and commercial hydroxyapatite were tested in the animal study. Finally, bone regeneration was assessed using haematoxylin and eosin (H&E) staining.

Results

The Ca/P ratio was measured for xenograft and commercial samples, and values were lower than those for the synthesised hydroxyapatite. The amount of surface porosity in the synthesised sample was greater than in the commercial and xenograft samples. Additionally, the density of the synthesised hydroxyapatite was lower than that of the xenograft and commercial samples. A small amount of ossification from natural bone margins was observed at 4 weeks in the xenograft and commercial hydroxyapatite group. In the synthetic group, immature bone formation was observed at 4 weeks. The rate of ossification and cell infiltration in the xenograft and commercial hydroxyapatite samples was higher at 8 weeks than at 4 weeks, and this rate was lower than in the synthesised hydroxyapatite group. The synthesised hydroxyapatite group exhibited greater ossification than the xenograft and commercial hydroxyapatite, and control groups at 12 weeks.

Conclusion

This study showed that synthesised hydroxyapatite had better effects on bone regeneration and could be used in bone tissue engineering.

Effect of Morphological Characteristics and Biomineralization of 3D-Printed Gelatin/Hyaluronic Acid/Hydroxyapatite Composite Scaffolds on Bone Tissue Regeneration

The use of porous three-dimensional (3D) composite scaffolds has attracted great attention in bone tissue engineering applications because they closely simulate the major features of the natural extracellular matrix (ECM) of bone. This study aimed to prepare biomimetic composite scaffolds via a simple 3D printing of gelatin/hyaluronic acid (HA)/hydroxyapatite (HAp) and subsequent biomineralization for improved bone tissue regeneration. The resulting scaffolds exhibited uniform structure and homogeneous pore distribution. In addition, the microstructures of the composite scaffolds showed an ECM-mimetic structure with a wrinkled internal surface and a porous hierarchical architecture. The results of bioactivity assays proved that the morphological characteristics and biomineralization of the composite scaffolds influenced cell proliferation and osteogenic differentiation. In particular, the biomineralized gelatin/HA/HAp composite scaffolds with double-layer staggered orthogonal (GEHA20-ZZS) and double-layer alternative structure (GEHA20-45S) showed higher bioactivity than other scaffolds. According to these results, biomineralization has a great influence on the biological activity of cells. Hence, the biomineralized composite scaffolds can be used as new bone scaffolds in bone regeneration.

Promoting professional and interprofessional relationship among nurses in Iran: a participatory action research

Communication is the basis of nursing care and can have a significant effect on patient and community health. This study aimed to optimize the professional and interprofessional relationships of nurses. This participatory action research was conducted with 288 patients and 23 staff of one of the Reference Hospitals in Tehran, Iran, from 2019 to 2020. Interviews were simultaneously analyzed using the conventional content analysis method, and in the quantitative section, the communication skills checklist and a researcher-made questionnaire were used. Participants gave oral and written consent, and their confidentiality and anonymity were respected. Participants’ experiences showed that the implemented programs changed the work environment. The acquired basic concepts were improving the nurse’s responsibility and accountability, improving the quality of care and respecting the patient and the family. Quantitative data obtained before and after the implementation of change programs showed that patient satisfaction increased from 41.57±7.03 to 94.34±4.67 and patient and family training from 113.73±19.77 to 245.99±36.61. The length of hospital stay decreased from 5.52±2.47 to 3.57±2.35 days, nosocomial infections from 32.1±2.8 to 17.4±2.4 and readmission from 4.8±1.2 to 2.3±1.1. The results indicated that patients’ quality of care and safety was increased by optimizing the nurse’s professional and interprofessional relationship. Patients reported greater respect, and nurses had higher job satisfaction.