Cell pellets from dental papillae can reexhibit dental morphogenesis and dentinogenesis

Animal models and related techniques for dentin study

The intricate and protracted process of dentin formation has been extensively explored, thanks to the significant advancements facilitated by the use of animal models and related techniques. Despite variations in their effectiveness, taking into account factors such as sensitivity, visibility, and reliability, these models or techniques are indispensable tools for investigating the complexities of dentin formation. This article focuses on the latest advances in animal models and related technologies, shedding light on the key molecular mechanisms that are essential in dentin formation. A deeper understanding of this phenomenon enables the careful selection of appropriate animal models, considering their suitability in unraveling the underlying molecular intricacies. These insights are crucial for the advancement of clinical drugs targeting dentin-related ailments and the development of comprehensive treatment strategies throughout the duration of the disease.

Current Trends, Advances, and Challenges of Tissue Engineering-Based Approaches of Tooth Regeneration: A Review of the Literature

INTRODUCTION

Tooth loss is a significant health issue. Currently, this situation is often treated with the use of synthetic materials such as implants and prostheses. However, these treatment modalities do not fully meet patients' biological and mechanical needs and have limited longevity. Regenerative medicine focuses on the restoration of patients' natural tissues via tissue engineering techniques instead of rehabilitating with artificial appliances. Therefore, a tissue-engineered tooth regeneration strategy seems like a promising option to treat tooth loss.

OBJECTIVE

This review aims to demonstrate recent advances in tooth regeneration strategies and discoveries about underlying mechanisms and pathways of tooth formation.

RESULTS AND DISCUSSION

Whole tooth regeneration, tooth root formation, and dentin-pulp organoid generation have been achieved by using different seed cells and various materials for scaffold production. Bioactive agents are critical elements for the induction of cells into odontoblast or ameloblast lineage. Some substantial pathways enrolled in tooth development have been figured out, helping researchers design their experiments more effectively and aligned with the natural process of tooth formation.

CONCLUSION

According to current knowledge, tooth regeneration is possible in case of proper selection of stem cells, appropriate design and manufacturing of a biocompatible scaffold, and meticulous application of bioactive agents for odontogenic induction. Understanding innate odontogenesis pathways play a crucial role in accurately planning regenerative therapeutic interventions in order to reproduce teeth.

Mesenchymal condensation in tooth development and regeneration: a focus on translational aspects of organogenesis

The teeth are vertebrate-specific, highly specialized organs performing fundamental functions of mastication and speech, the maintenance of which is crucial for orofacial homeostasis and is further linked to systemic health and human psychosocial well-being. However, with limited ability for self-repair, the teeth can often be impaired by traumatic, inflammatory, and progressive insults, leading to high prevalence of tooth loss and defects worldwide. Regenerative medicine holds the promise to achieve physiological restoration of lost or damaged organs, and in particular an evolving framework of developmental engineering has pioneered functional tooth regeneration by harnessing the odontogenic program. As a key event of tooth morphogenesis, mesenchymal condensation dictates dental tissue formation and patterning through cellular self-organization and signaling interaction with the epithelium, which provides a representative to decipher organogenetic mechanisms and can be leveraged for regenerative purposes. In this review, we summarize how mesenchymal condensation spatiotemporally assembles from dental stem cells (DSCs) and sequentially mediates tooth development. We highlight condensation-mimetic engineering efforts and mechanisms based on ex vivo aggregation of DSCs, which have achieved functionally robust and physiologically relevant tooth regeneration after implantation in animals and in humans. The discussion of this aspect will add to the knowledge of development-inspired tissue engineering strategies and will offer benefits to propel clinical organ regeneration.

A comprehensive analysis of human dental pulp cell spheroids in a three-dimensional pellet culture system

OBJECTIVE

Three-dimensional (3D) cell culture methods are of high importance to studies of biological processes. This is particularly the case with spheroid cultures, which create 3D cell aggregates without the use of exogenous materials. Compared to conventional monolayer cultures, cellular spheroid cultures have been demonstrated to improve multilineage potential and extracellular matrix production. To address this issue in depth, we present a more comprehensive analysis of 3D human dental pulp cell (hDPC) spheroids.

DESIGN

hDPC spheroids were fabricated by the pellet culture method and were cultured without adding any reagent to induce differentiation. The gene-expression profiles of the 3D and two-dimensional (2D) cultured hDPCs were compared by complementary DNA microarray analysis. Odontoblastic and osteoblastic differentiation marker gene expression was evaluated by quantitative real-time PCR (RT-qPCR). Hematoxylin-eosin (HE) staining and transmission electron microscopy (TEM) were applied to examine the morphology of hDPC spheroids and extracellular matrix components.

RESULTS

Compared with 2D monolayer culture, microarray analysis identified 405 genes and 279 genes with twofold or greater differential expression after 3 days and 28 days of 3D culture, respectively. In 3D hDPC spheroids, gene ontology analysis revealed upregulation of extracellular matrix-related genes and downregulation of cell growth-related genes. RT-qPCR analysis showed higher expression levels of osteocalcin, dentin sialophosphoprotein, and alkaline phosphatase. TEM revealed the morphological characteristics of the fibrillar collagen-rich matrix and cell-cell interactions.

CONCLUSIONS

The present findings provide clues to understanding the mechanisms of pellet-cultured hDPCs and contribute to future research in the comparative studies of different 3D culture methods.

Tissue engineering: Dentin - pulp complex regeneration approaches (A review)

Dental pulp is a highly specialized tissue that preserves teeth. It is important to maintain the capabilities of dental pulp before a pulpectomy by creating a local restoration of the dentin-pulp complex from residual dental pulp. The articles identified were selected by two reviewers based on entry and exit criteria. All relevant articles indexed in PubMed, Springer, Science Direct, and Scopus with no limitations from 1961 to 2016 were searched. Factors investigated in the selected articles included the following key words: Dentin-Pulp Complex, Regeneration, Tissue Engineering, Scaffold, Stem Cell, and Growth Factors. Of the 233 abstracts retrieved, the papers which were selected had evaluated the clinical aspects of the application of dentin-pulp regeneration. Generally, this study has introduced a new approach to provoke the regeneration of the dentin-pulp complex after a pulpectomy, so that exogenous growth factors and the scaffold are able to induce cells and blood vessels from the residual dental pulp in the tooth root canal. This study further presents a new strategy for local regeneration therapy of the dentin-pulp complex. This review summarizes the current knowledge of the potential beneficial effects derived from the interaction of dental materials with the dentin-pulp complex as well as potential future developments in this exciting field.

The differentiation potential of gingival mesenchymal stem cells induced by apical tooth germ cell‑conditioned medium

Gingival-derived mesenchymal stem cells (GMSCs) have recently been harvested; however, the use of GMSCs in periodontal tissue engineering requires further study. The present study established an indirect co‑culture system between rat apical tooth germ‑conditioned medium (APTG‑CM) and GMSCs, in order to determine the effects on periodontal tissue differentiation in vitro and in vivo. Using the limiting dilution technique, single‑colony derived human GMSCs and periodontal ligament stem cells (PDLSCs) were isolated and expanded to obtain homogeneous populations. PDLSCs were used as a positive control group. Cell cycle distribution, alkaline phosphatase (ALP) activity, mineralization behavior, expression of genes associated with a cementoblast phenotype (osteocalcin, bone sialoprotein, ALP, type I collagen, cementum‑derived protein 23), and in vivo differentiation capacities of GMSCs/PDLSCs co‑cultured with APTG‑CM were evaluated. Flow cytometry indicated that GMSCs and PDLSCs were positive for STRO‑1 and CD105, whereas CD45 expression was negative. The cell types were capable of forming colonies, and of osteogenic and adipogenic differentiation in response to appropriate stimuli. The induced GMSCs and PDLSCs exhibited numerous characteristics associated with cementoblast lineages, as indicated by increased proliferation and ALP activity, and upregulated expression of cementum‑associated genes in vitro. In vivo, cementum/periodontal ligament‑like structures were shown to form along the dentin surface and ceramic bovine bone in GMSCs and PDLSCs induced by APTG‑CM group. Conversely, vertical fibers could not insert in the control group, which was not co‑cultured with APTG‑CM. In conclusion, GMSCs are likely to have a role in periodontal tissue regeneration. In addition, APTG‑CM was able to provide a cementogenic microenvironment and promote differentiation of GMSCs along the cementoblastic lineage.

Nanomaterials for Tissue Engineering In Dentistry

The tissue engineering (TE) of dental oral tissue is facing significant changes in clinical treatments in dentistry. TE is based on a stem cell, signaling molecule, and scaffold triad that must be known and calibrated with attention to specific sectors in dentistry. This review article shows a summary of micro- and nanomorphological characteristics of dental tissues, of stem cells available in the oral region, of signaling molecules usable in TE, and of scaffolds available to guide partial or total reconstruction of hard, soft, periodontal, and bone tissues. Some scaffoldless techniques used in TE are also presented. Then actual and future roles of nanotechnologies about TE in dentistry are presented.

Exposure to a continuous low dose of tetrachlorodibenzo-p-dioxin impairs the development of the tooth root in lactational rats and alters the function of apical papilla-derived stem cells

OBJECTIVES

Ubiquitous environmental pollutants such as 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) cause abnormalities in reproduction and development. TCDD inhibits the development of teeth, and its effects depend on its dose and the developmental stage of the tooth. Our aim here was to investigate the effect of lower doses of TCDD on the development of the tooth root in vivo and in vitro.

DESIGN

We observed tooth root development in lactational rats exposed to continuous low doses of TCDD starting on postnatal day 6 using Mico-CT analyses and histopathological examinations. And then the characteristics of stem cells derived from the apical papilla (SCAPs) were evaluated and compared with SCAPs induced by lower doses of TCDD both in vitro and in vivo.

RESULTS

The results of experiments showed that rat pups exposed to low dose TCDD at prenatal stage developed, dentine hypoplasia, and hypomineralization. Further, TCDD impaired the functions of SCAPs in vivo by inhibiting cell proliferation and osteogenic and odontogenic differentiation. The impairment of SCAPs after TCDD exposure was accompanied by increased expression of AHR, down-regulation of the expression of Runx2, and alkaline phosphatase, suggesting that the AHR pathway mediated the effects of TCDD.

CONCLUSION

These results provide the first insights into the toxicity of TCDD, which adversely affects the development of the tooth root through indirectly altering the function of SCAPs.

Mechanical stress stimulates the osteo/odontoblastic differentiation of human stem cells from apical papilla via erk 1/2 and JNK MAPK pathways

BACKGROUND INFORMATION

Stem cells from apical papilla (SCAPs) are a potent candidate for the apexogenesis/apexification due to their multiple differentiation capacity. During the orthodontic treatment of developing teeth, SCAPs in vivo are usually subjected to the cyclic stress induced by compression forces. However, it remains unclear whether mechanical stress can affect the proliferation and differentiation of human SCAPs.

RESULTS

Human SCAPs were isolated and stimulated by 200 g mechanical stimuli for 30 min and their proliferation and differentiation capacity were evaluated in vitro at different time points. MTT and FCM results demonstrated that cell proliferation was enhanced, while TEM findings showed the morphological and ultrastructural changes in stress-treated SCAPs. ALP activity and mineralization capacity of stress-treated SCAPs were upregulated . In the meantime, higher odontogenic and osteogenic differentiation were found in stress-treated SCAPs by real-time RT-PCR and Western blot, as indicated by the expression of related markers at both mRNA and protein levels. Moreover, the protein expressions of pJNK and pERK MAPK pathways were upregulated.

CONCLUSION

Together, these findings suggest that mechanical stress is an important factor affecting the proliferation and differentiation of SCAPs via the activation of ERK and JNK signaling pathway.

Three-dimensional spheroid culture promotes odonto/osteoblastic differentiation of dental pulp cells

OBJECTIVE

Three-dimensional (3D) spheroid culture is a method for creating 3D aggregations of cells and their extracellular matrix without a scaffold mimicking the actual tissues. The aim of this study was to evaluate the effects of 3D spheroid culture on the phenotype of immortalized mouse dental papilla cells (MDPs) that have the ability to differentiate into odontoblasts.

METHODS

We cultured MDPs for 1, 3, 7, and 14 days in 96-well low-attachment culture plates for 3D spheroid culture or flat-bottomed plates for two-dimensional (2D) monolayer culture. Cell proliferation and apoptosis were detected by immunohistochemical staining of Ki67 and cleaved caspase-3, respectively. Hypoxia was measured by the hypoxia probe LOX-1. Odonto/osteoblastic differentiation marker gene expression was evaluated by quantitative PCR. We also determined mineralized nodule formation, alkaline phosphatase (ALP) activity, and dentine matrix protein-1 (DMP1) expression. Vinculin and integrin signalling-related proteins were detected immunohistochemically.

RESULTS

Odonto/osteoblastic marker gene expression and mineralized nodule formation were significantly up-regulated in 3D spheroid-cultured MDPs compared with those in 2D monolayer-cultured MDPs (p<0.05). Histologically, 3D spheroid colonies consisted of two compartments: a cell-dense peripheral zone and cell-sparse core zone. Proliferating cells with high ALP activity and DMP1 expression were found mainly in the peripheral zone that also showed strong expression of vinculin and integrin signalling-related proteins. In contrast, apoptotic and hypoxic cells were detected in the core zone.

CONCLUSION

3D spheroid culture promotes odonto/osteoblastic differentiation of MDPs, which may be mediated by integrin signalling.

Co-regulation of LPS and tensile strain downregulating osteogenicity via c-fos expression

AIMS

Orthodontic forces are known to aggravate inflammation-induced destruction of the periodontium, but the underlying mechanism has not been elucidated. The present study investigates how inflammation and forces co-regulate periodontium damage.

MAIN METHODS

Cultures of MC3T3-E1 osteoblasts were pre-treated with conditioned medium from RAW264.7 macrophages exposed to 100ng/ml Porphyromonas gingivalis (Pg)-LPS. Conditioned medium was analyzed by ELISA for interleukin-1 beta (IL-1β), interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF-α). Osteoblasts were then subjected to tensile strain (0.5Hz; 1000μ or 3000μ) for 0min, 5min, 15min, 30min, 1h, 3h, and 6h. The cultures were analyzed for mRNA and protein levels of c-fos. Cells were also analyzed for alkaline phosphatase (ALP) activity.

KEY FINDINGS

(Pg)-LPS stimulated the secretion of all three cytokines from RAW264.7 cells in a dose- and time-dependent manner. Medium from (Pg)-LPS stimulated cells induced a 10-fold increase in c-fos expression, which decreased to a 4-fold plateau after 3h. In contrast, ALP activity of control osteoblasts decreased during the first 60min, then recovered over the next 4h. Pretreatment with conditioned medium generated the same initial decrease during tensile strain but prevented the recovery.

SIGNIFICANCE

Our study showed, for the first time, that the inhibitory effect of inflammation and tensile strain on osteogenicity is associated with the upregulation in c-fos expression. In addition, inflammation may reduce the ability of osteoblasts to restore their osteogenic capacity during sustained tensile stress and contribute to periodontium damage.

Regeneration of dental pulp/dentine complex with a three-dimensional and scaffold-free stem-cell sheet-derived pellet

Dental pulp/dentine complex regeneration is indispensable to the construction of biotissue-engineered tooth roots and represents a promising approach to therapy for irreversible pulpitis. We used a tissue-engineering method based on odontogenic stem cells to design a three-dimensional (3D) and scaffold-free stem-cell sheet-derived pellet (CSDP) with the necessary physical and biological properties. Stem cells were isolated and identified and stem cells from root apical papilla (SCAPs)-based CSDPs were then fabricated and examined. Compact cell aggregates containing a high proportion of extracellular matrix (ECM) components were observed, and the CSDP culture time was prolonged. The expression of alkaline phosphatase (ALP), dentine sialoprotein (DSPP), bone sialoprotein (BSP) and runt-related gene 2 (RUNX2) mRNA was higher in CSDPs than in cell sheets (CSs), indicating that CSDPs have greater odonto/osteogenic potential. To further investigate this hypothesis, CSDPs and CSs were inserted into human treated dentine matrix fragments (hTDMFs) and transplanted into the subcutaneous space in the backs of immunodeficient mice, where they were cultured in vivo for 6 weeks. The root space with CSDPs was filled entirely with a dental pulp-like tissue with well-established vascularity, and a continuous layer of dentine-like tissue was deposited onto the existing dentine. A layer of odontoblast-like cells was found to express DSPP, ALP and BSP, and human mitochondria lined the surface of the newly formed dentine-like tissue. These results clearly indicate that SCAP-CSDPs with a mount of endogenous ECM have a strong capacity to form a heterotopic dental pulp/dentine complex in empty root canals; this method can be used in the fabrication of bioengineered dental roots and also provides an alternative treatment approach for pulp disease.

Osteogenic differentiation of human dental pulp stromal cells on 45S5 Bioglass® based scaffolds in vitro and in vivo

The increasing clinical demand for bone substitutes has driven significant progress in cell-based therapies for bone tissue engineering. The underpinning goals for success are to identify the most appropriate cell source and to provide three-dimensional (3D) scaffolds that support cell growth and enhance osteogenic potential. In this study, human dental pulp stromal cells (HDPSCs) were cultured under basal or osteogenic conditions either in monolayers or on 3D Bioglass® scaffolds in vitro for 2 or 4 weeks. Cell-scaffold constructs were also implanted intraperitoneally in nude mice for 8 weeks. Osteogenic potential was assessed using quantitative real-time polymerase chain reaction and histological/immunohistochemical assays. In monolayer culture, osteoinductive conditions enhanced HDPSC expression of osteogenic gene markers (COL1A1, RUNX2, OC, and/or OCN) compared with basal conditions while culture of HDPSCs on 3D scaffolds promoted osteogenic gene expression compared with monolayer culture under both basal and osteogenic conditions. These results were confirmed using histological and immunohistochemical analyses. In vivo implantation of the HDPSC 3D Bioglass constructs showed evidence of sporadic woven bone-like spicules and calcified tissue. In conclusion, this study has demonstrated the potential of using a combination of HDPSCs with 3D 45S5 Bioglass scaffolds to promote bone-like tissue formation in vitro and in vivo, offering a promising approach for clinical bone repair and regeneration.

Skin epithelial cells as possible substitutes for ameloblasts during tooth regeneration

The disappearance of ameloblasts in erupted teeth hampers the implementation of tissue engineering-based tooth regeneration. We aimed at utilizing skin epithelial cells as the appropriate substitute for ameloblasts. The conversion potential of 1 day postnatal rat skin epithelial cells to ameloblasts was investigated under the induction of dental papillae mesenchymal cells (DPMCs). Induction strategies had been designed both in vitro and in vivo. Markers for ameloblasts had been detected in skin epithelial cells, which showed a columnar appearance with the nuclei located at one side, under indirect co-culture with DPMCs in vitro. An enamel-dentine-like and tooth germ-like structure was formed by recombining skin epithelial pieces or cells with DPMCs after 14 days of implantation in rat renal capsule. Immunohistochemistry and cell labelling analysis further demonstrated that the enamel-forming cells were skin epithelium-derived. These results indicated that the skin epithelium-derived cells from postnatal rats have the potential to convert to functional ameloblasts under effective induction.

Dentinogenic capacity: immature root papilla stem cells versus mature root pulp stem cells

BACKGROUND INFORMATION

Immature dental papilla stem cells and mature dental pulp stem cells are capable of performing the dentinogenesis under suitable circumstances. However, a dentinogenic comparison between immature and mature dental root stem cells remains unknown.

RESULTS

iRPSCs (immature root papilla stem cells) at the root-forming stage and mRPSCs (mature root pulp stem cells) at the root-completed stage were isolated from 16-day-old and 8-week-old rat first molar roots, respectively. Growth kinetics and flow cytometry results showed that iRPSCs presented more active proliferation properties than mRPSCs. Their odontoblastic differentiation and dentinogenic potential were subsequently compared both in vitro and in vivo. iRPSCs exhibited a more potent odontoblastic differentiation than mRPSCs in vitro, as indicated by the higher levels of gene expression for dentin sialophosphoprotein and ALP (alkaline phosphatase), increased protein expression of dentin sialoprotein and runt-related transcription factor 2, decreased gene/protein expression for osterix/osteocalcin (osteogenic markers), elevated ALP activity and enhanced calcium deposition in the mineralization-inducing media. Allotransplantation results demonstrated that all iRPSCs pellets in vivo performed typical dentinogenesis, whereas mRPSCs pellets mainly produced bone-like tissues.

CONCLUSION

iRPSCs presented stronger dentinogenesis but weaker osteogenesis than did mRPSCs, suggesting that the dentinogenic competence of root mesenchymal stem cells decreases, whereas their osteogenic potential the increases following the maturation of the tooth root.

Cementum- and periodontal ligament-like tissue formation by dental follicle cell sheets co-cultured with Hertwig's epithelial root sheath cells

Dental follicle cells (DFCs) are believed contain the precursor cells of the periodontium and can form cell sheets by secreting extracellular matrix (ECM) proteins. Cell sheet engineering has been recently developed and applied successfully in the field of tissue regeneration. However, research on the in vitro characteristics of DFC sheets is lacking and an assessment of whether DFC sheets can produce periodontal tissues in vivo has not been reported. To test the characteristics and applicability of DFC sheets in this field, we established a co-culture system of rat DFCs and Hertwig's epithelial root sheath (HERS) cells in vitro, and included the following controls: a co-culture of DFCs and alveolar mucosa epithelial cells, DFCs with no cells in the upper chamber, and DFCs cultured without an upper chamber. After 3 weeks of co-culturing the cells, the DFC sheets were transplanted into adult male rats' omenta. One week after co-culturing DFCs with HERS cells, mRNA levels of collagen type I (COL-1), alkaline phosphatase (ALP), runt related transcription factor 2 (Runx 2) and bone sialoprotein (BSP) were increased significantly. In addition, after 3 weeks of co-culturing the cells, the numbers of ALP-, osteocalcin (OCN)-, BSP- and osteoprotegerin (OPG)-positive DFCs increased. The DFCs also produced more calcified nodules and exhibited an increased number of subcellular organelles, which are important for protein synthesis and secretion. Moreover, gap junctions were found between the experimental DFCs within the sheet. Five weeks of in vivo growth of DFC sheets pre-exposed to HERS cells led to the formation of cementum-like tissues, which were positive for OCN, BSP and OPG, as well as the formation of periodontal ligament-like tissues, which were positive for COL-1. In contrast, control cells only produced fibrous tissues. These results indicate that the DFC sheets induced by HERS cells are able to produce periodontal tissues through epithelial-mesenchymal interactions. Therefore, DFC sheets may be useful in the field of periodontium regeneration.

Pulp tissue from primary teeth: new source of stem cells

SHED (stem cells from human exfoliated deciduous teeth) represent a population of postnatal stem cells capable of extensive proliferation and multipotential differentiation. Primary teeth may be an ideal source of postnatal stem cells to regenerate tooth structures and bone, and possibly to treat neural tissue injury or degenerative diseases. SHED are highly proliferative cells derived from an accessible tissue source, and therefore hold potential for providing enough cells for clinical applications. In this review, we describe the current knowledge about dental pulp stem cells and discuss tissue engineering approaches that use SHED to replace irreversibly inflamed or necrotic pulps with a healthy and functionally competent tissue that is capable of forming new dentin.

Differentiation potential of STRO-1+ dental pulp stem cells changes during cell passaging

Background

Dental pulp stem cells (DPSCs) can be driven into odontoblast, osteoblast, and chondrocyte lineages in different inductive media. However, the differentiation potential of naive DPSCs after serial passaging in the routine culture system has not been fully elucidated.

Results

DPSCs were isolated from human/rat dental pulps by the magnetic activated cell sorting based on STRO-1 expression, cultured and passaged in the conventional culture media. The biological features of STRO-1⁺ DPSCs at the 1^st and 9^th passages were investigated. During the long-term passage, the proliferation ability of human STRO-1⁺ DPSCs was downregulated as indicated by the growth kinetics. When compared with STRO-1⁺ DPSCs at the 1^st passage (DPSC-P1), the expression of mature osteoblast-specific genes/proteins (alkaline phosphatase, bone sialoprotein, osterix, and osteopontin), odontoblast-specific gene/protein (dentin sialophosphoprotein and dentin sialoprotein), and chondrocyte-specific gene/protein (type II collagen) was significantly upregulated in human STRO-1⁺ DPSCs at the 9^th passage (DPSC-P9). Furthermore, human DPSC-P9 cells in the mineralization-inducing media presented higher levels of alkaline phosphatase at day 3 and day 7 respectively, and produced more mineralized matrix than DPSC-P9 cells at day 14. In vivo transplantation results showed that rat DPSC-P1 cell pellets developed into dentin, bone and cartilage structures respectively, while DPSC-P9 cells can only generate bone tissues.

Conclusions

These findings suggest that STRO-1⁺ DPSCs consist of several interrelated subpopulations which can spontaneously differentiate into odontoblasts, osteoblasts, and chondrocytes. The differentiation capacity of these DPSCs changes during cell passaging, and DPSCs at the 9^th passage restrict their differentiation potential to the osteoblast lineage in vivo.

Tissue engineering of cementum/periodontal-ligament complex using a novel three-dimensional pellet cultivation system for human periodontal ligament stem cells

Limitations of conventional regeneration modalities underscore the necessity of recapitulating development for periodontal tissue engineering. In this study, we proposed a novel three-dimensional pellet cultivation system for periodontal ligament stem cells (PDLSCs) to recreate the biological microenvironment similar to those of a regenerative milieu. Monodispersed human PDLSCs were cultured in medium with ascorbic acid and conditioned medium from developing apical tooth germ cells and were subsequently harvested from culture plate as a contiguous cell sheet with abundant extracellular matrix. The detached cell-matrix membrane spontaneously contracted to produce a single-cell pellet. The PDLSCs embedded within this cell-matrix complex exhibited several phenotypic characteristics of cementoblast lineages, as indicated by upregulated alkaline phosphatase activity, accelerated mineralization, and the expression of bone sialoprotein and osteocalcin genes. When this PDLSC pellets were transplanted into immunocompromised mice, a regular aligned cementum/PDL-like complex was formed. These results suggest that the combination of apical tooth germ cell-conditioned medium and endogenous extracellular matrix could maximally mimic the microenvironment of root/periodontal tissue development and enhance the reconstruction of physiological architecture of a cementum/PDL-like complex in a tissue-mimicking way; on the other hand, such PDLSC pellet may also be a promising alternative to promote periodontal defect repair for future clinical applications.

Reclaiming a natural beauty: whole-organ engineering with natural extracellular materials

The ability to engineer whole organs as replacements for allografts and xenografts is an ongoing pursuit in regenerative medicine. While challenges remain, including systemic tissue integration with angiogenesis, lymphatiogenesis and neurogenesis, ongoing efforts are working to develop novel technologies to produce implantable engineered scaffolds and potentially engineered whole organs. Natural extracellular matrix materials, commonly utilized in vitro, are now being used as effective, natural, acellular allografts, and are being integrated into nanoscale scaffolds and matrices with programmable responsiveness. Based on the significant use of natural scaffolds for tissue regeneration and bioengineering strategies, this review focuses on recent and ongoing efforts to engineer whole organs, such as the tooth, featuring natural extracellular matrix molecules.

Dental pulp stem cells: what, where, how?

INTRODUCTION

It is now accepted that progenitor/stem cells reside within the post-natal dental pulp. Studies have identified several niches of multipotent mesenchymal progenitor cells, known as dental pulp stem cells, which have a high proliferative potential for self-renewal. These progenitor stem cells are now recognized as being vital to the dentine regeneration process following injury. Understanding the nature of these progenitor/stem cell populations in the pulp is important in determining their potentialities and development of isolation or recruitment strategies for use in regeneration and tissue engineering. Characterization of these cells, and determination of their potentialities in terms of specificity of regenerative response, may help direct new clinical treatment modalities. Such novel treatments may involve controlled direct recruitment of the cells in situ and possible seeding of stem cells at sites of injury for regeneration or use of the stem cells with appropriate scaffolds for tissue engineering solutions. Such approaches may provide an innovative and novel biologically based new generation of clinical materials and/or treatments for dental disease.

AIM

This study aimed to review the body of knowledge relating to stem cells and to consider the possibility of these cell populations, and related technology, in future clinical applications.

Essential role of ADAM28 in regulating the proliferation and differentiation of human dental papilla mesenchymal cells (hDPMCs)

Dental papilla mesenchymal cells (DPMCs) have been supposed to possess the relatively independent and critical role for tooth development and morphogenesis. Here, we characterized the role of ADAM28, a member of a disintegrin and metalloproteinase (ADAM) family, in the regulative mechanisms of odontogenic capability of hDPMCs. Immunofluorescence staining showed the ubiquitous expression of ADAM28 in multiple human dental mesenchymal and epithelial cells. After confirming the effect of eukaryotic expression plasmid containing ADAM28 coding region and ADAM28 antisense oligodeoxynucleotide (AS-ODN), we respectively transfected them into hDPMCs and observed the biological markers for proliferation and differentiation. Overexpression of ADAM28 favored the proliferation and lineage-specific differentiation of hDPMCs, while blockage of ADAM28 exerted the opposite effects and induced apoptosis. These results identified an unrecognized hypothesis that ADAM28 may function as positive regulator of growth and differentiation of hDPMCs and act as an important molecule mediating reciprocal epithelial-mesenchymal signaling during tooth organ development.

Odontogenic capability: bone marrow stromal stem cells versus dental pulp stem cells

BACKGROUND INFORMATION

Although adult bone-marrow-derived cell populations have been used to make teeth when recombined with embryonic oral epithelium, the differences between dental and non-dental stem-cell-mediated odontogenesis remain an open question.

RESULTS

STRO-1(+) (stromal precursor cell marker) DPSCs (dental pulp stem cells) and BMSSCs (bone marrow stromal stem cells) were isolated from rat dental pulp and bone marrow respectively by magnetic-activated cell-sorting techniques. Their odontogenic capacity was compared under the same inductive microenvironment produced by ABCs (apical bud cells) from 2-day-old rat incisors. Co-cultured DPSCs/ABCs in vitro showed more active odontogenic differentiation ability than mixed BMSSCs/ABCs, as indicated by the accelerated matrix mineralization, up-regulated alkaline phosphatase activity, cell-cycle modification, and the expression of tooth-specific proteins and genes. After cultured for 14 days in the renal capsules of rat hosts, recombined DPSC/ABC pellets formed typical tooth-shaped tissues with balanced amelogenesis and dentinogenesis, whereas BMSSC/ABC recombinants developed into atypical dentin-pulp complexes without enamel formation. DPSC and BMSSC pellets in vivo produced osteodentin-like structures and fibrous connective tissues respectively.

CONCLUSIONS

DPSCs presented more striking odontogenic capability than BMSSCs under the induction of postnatal ABCs. This report provides critical insights into the selection of candidate cells for tooth regeneration between dental and non-dental stem cell populations.