Effect of potassium ions at the different concentration on the interaction between AmB and the lipid monolayer containing cholesterol or ergosterol

Insights into the antifungal mechanism of Bacillus subtilis cyclic lipopeptide iturin A mediated by potassium ion channel

Fungal infections pose severe and potentially lethal threats to plant, animal, and human health. Ergosterol has served as the primary target for developing antifungal medications. However, many antifungal drugs remain highly toxic to humans due to similarity in cell membrane composition between fungal and animal cells. Iturin A, lipopeptide produced by Bacillus subtilis, efficiently inhibit various fungi, but demonstrated safety in oral administration, indicating the existence of targets different from ergosterol. To pinpoint the exact antifungal target of iturin A, we used homologous recombination to knock out and overexpress erg3, a key gene in ergosterol synthesis. Saccharomyces cerevisiae and Aspergillus carbonarius were transformed using the LiAc/SS-DNNPEG and Agrobacterium-mediated transformation (AMT), respectively. Surprisingly, increasing ergosterol content did not augment antifungal activity. Furthermore, iturin A's antifungal activity against S. cerevisiae was reduced while it pre-incubation with voltage-gated potassium (Kv) channel inhibitor, indicating that Kv activation was responsible for cell death. Iturin A was found to activate the Kv protein, stimulating K+ efflux from cell. In vitro tests confirmed interaction between iturin A and Kv protein. This study highlights Kv as one of the precise targets of iturin A in its antifungal activity, offering a novel target for the development of antifungal medications.

Effect of high sodium ion level on the interaction of AmB with a cholesterol-rich phospholipid monolayer

Invasive fungal infections are a primary reason for high mortality in immunocompromised people, especially in critically ill patients, such as intensive care unit (ICU) patients, advanced cancer patients, or severe burn patients. Hypernatremia also can increase mortality in severely ill patients. Amphotericin B (AmB) is the gold standard for treating infections, but in severely ill patients, AmB can cause hematotoxicity when administered intravenously due to its interaction with cholesterol on red blood cell membranes. This results in limited doses of AmB and affects the treatment of infections. The proportion of cholesterol molecules in membrane lipids in red blood cells is as high as 50 mol%, and the sodium ions can influence the interaction between AmB and lipids on the membrane. Therefore, in the complex clinical situation of a severely ill patient with a fungal infection and hypernatremia, the interaction between amphotericin B and the red blood cell membranes is worth studying in depth. In this work, the interaction between AmB and the dipalmitoyl phosphatidylcholine (DPPC)/cholesterol mixed monolayer in the presence of high sodium ion levels was studied when the proportion of cholesterol was 50%. The results show that the effect of AmB on reducing the monolayer's area at a high level of sodium ions is slightly stronger at 30 mN/m. The effect of AmB on reducing the elastic modulus of the DPPC/Chol monolayer is significantly weakened by a high sodium ion level, compared with the level of sodium ions at normal physiological concentration. The higher the sodium ion concentration, the weaker the intermolecular force of the DPPC/Chol/AmB mixed monolayers. The scanning electron microscope (SEM) and atomic force microscopy (AFM) observations suggest that at a high sodium ion level, the presence of AmB significantly reduces the surface roughness of the DPPC/Chol monolayer. AmB may bind to cholesterol molecules, and it isolates cholesterol from the monolayer, resulting in a reduced height of the cholesterol-rich monolayer and an increasingly dispersed monolayer region. The results are beneficial to understanding the mechanism of impact of a high sodium ion level on the relationship between AmB and red blood cell membranes rich in cholesterol and are valuable for understanding the hemolytic toxicity of AmB to red blood cells at a high sodium ion level.

Regulation of calcium ions on the interaction between amphotericin B and cholesterol-rich phospholipid monolayer in LE phase and LC phase

Amphotericin B, as a "gold standard", is used to treat invasive fungal infections. The AmB molecule can bind easily to cholesterol and damage cell membranes, so it produces the toxicity on cell membrane, which limits its clinical dose. However, the interaction between AmB and cholesterol-rich membrane is unclear now. The phase state of the membrane and the metal cation outside cell membrane may affect the interaction between AmB and the membrane. In this work, the effects of amphotericin B on the mean molecular area, elastic modulus and stability of mammalian cell membrane rich in cholesterol in the presence of Ca²⁺ ions were studied using DPPC/Chol mixed Langmuir monolayer as a model. The Langmuir-Blodgett method and AFM test were used to study the effects of this drug on the morphology and height of cholesterol-rich phospholipid membrane in the presence of Ca²⁺ ions. The influence of calcium ions on the mean molecular area and the limiting molecular area was similar in LE phase and in LC phase. The calcium ions made the monolayer more condensed. However, calcium ions can weaken the shortening effect of AmB on the relaxation time of the DPPC/Chol mixed monolayer in LE phase but enhance it in LC phase. Interestingly, calcium ions caused a LE-LC coexistence phase to occur in the DPPC/Chol/AmB mixed monolayers at 35mN/m, which was confirmed by atomic force microscopy. The results can help to understand the interaction between amphotericin B and cell membrane rich in cholesterol in the calcium ions environment.

Influence of Potassium Ions on Act of Amphotericin B to the DPPC/Chol Mixed Monolayer at Different Surface Pressures

Amphotericin B (AmB) is an antifungal drug that rarely develops resistance. It has an affinity with the cholesterol on mammalian cell membranes, disrupting the structure and function of the membranes, which are also affected by potassium ions. However, the mechanism is unclear. In this paper, the Langmuir monolayer method was used to study the effects of potassium ions on the surface pressure–mean molecular area of isotherms, elastic modulus and the surface pressure–time curves of a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/cholesterol (DPPC/Chol) monolayer and a DPPC/Chol/AmB monolayer. The morphology and thickness of the Langmuir–Blodgett films were studied via atomic force microscopy. The results showed that AmB can increase the mean molecular area of the DPPC/Chol mixed monolayer at low pressures (15 mN/m) but reduces it at high pressures (30 mN/m). The potassium ions may interfere with the effect of AmB in different ways. The potassium ions can enhance the influence of AmB on the stability of monolayer at low surface pressures, but weaken it at high surface pressures. The potassium ions showed significant interference with the interaction between AmB and the cholesterol-enriched region. The results are helpful for us to understand how the effect of amphotericin B on the phospholipid membrane is interfered with by potassium ions when amphotericin B enters mammalian cell membrane.

Influence of amphotericin B on the DPPC/DOPC/sterols mixed monolayer in the presence of calcium ions

Amphotericin B, an acquainted antifungal drug, has reattracted the attention of most scholars due to its one important advantage of making the fungus less resistant. Amphotericin B's antifungal properties are derived from its ability to interact with ergosterols on the fungal cells' membrane to form pores. However, the cholesterol in the human cell membranes is similar in structure to ergosterol, which cause the drug to produce certain toxicity and make the clinical use of amphotericin B limited. The study of the interaction between amphotericin B and lipid monolayer in the presence of cholesterol or ergosterol is crucial to understanding the mechanism of effect of the drug on cell membranes. Langmuir monolayer as a model for half of cell membranes can precisely control the proportion of components and the solution environment, which has been used to do a lot of research about the interaction of amphotericin B with lipids. It is noteworthy that some ions associated with life activities play an important role in it, such as calcium ions. In this work, the surface pressure-mean molecular area isotherms, elastic modulus and the surface pressure-time curves of DPPC/DOPC/sterol mixed monolayer with or without amphotericin B were studied in the different concentration of calcium ions. The morphology of the Langmuir-Blodgett films transferred on the mica were observed by atomic force microscopy. The results shown that AmB changed the elastic modulus and surface morphology of DPPC/DOPC/sterol mxied monolayer, which was significantly different with different types of sterols. Calcium ions can regulate the effect of this drug, which was clearly different due to different types of sterols. This work provides useful information to further understand the influence mechanism of calcium ions on the interaction between AmB and phospholipid/sterol monolayer, which is helpful to find out the effect mechanism of calcium ion on the interaction between AmB and phospholipid monolayer containing ergosterol or cholesterol and to understand the mechanism of AmB influencing on the membrane of fungal or human cells.

Effects of Carboxyl or Amino Group Modified InP/ZnS Nanoparticles Toward Simulated Lung Surfactant Membrane

Quantum dots (QDs) as a promising optical probe have been widely used for in vivo biomedical imaging; especially enormous efforts recently have focused on the potential toxicity of QDs to the human body. The toxicological effects of the representative InP/ZnS QDs as a cadmium-free emitter are still in the early stage and have not been fully unveiled. In this study, the DPPC/DPPG mixed monolayer was used to simulate the lung surfactant monolayer. The InP/ZnS-COOH QDs and InP/ZnS-NH₂ QDs were introduced to simulate the lung surfactant membrane's environment in the presence of InP/ZnS QDs. The effects of InP/ZnS QDs on the surface behavior, elastic modulus, and stability of DPPC/DPPG mixed monolayer were explored by the surface pressure-mean molecular area isotherms and surface pressure-time curves. The images observed by Brewster angle microscope and atomic force microscope showed that the InP/ZnS QDs affected the morphology of the monolayer. The results further demonstrated that the InP/ZnS QDs coated with different surface groups can obviously adjust the mean molecular area, elastic modulus, stability, and microstructure of DPPC/DPPG mixed monolayer. Overall, this work provided useful information for in-depth understanding of the effects of the -COOH or -NH₂ group coated InP/ZnS QDs on the surface of lung surfactant membrane, which will help scientists to further study the physiological toxicity of InP/ZnS QDs to lung health.

Interaction between polyene antifungal drug and saturated phospholipid monolayer regulated by calcium ions at the air-water interface

Amphotericin B (AmB) is a polyene antifungal drug, which could directly form pores on the sterol-free phospholipid monolayers. The interaction between AmB and phospholipid can be affected by calcium ions, but the mechanism is still unclear. DPPC is a saturated phospholipid with -PC group, which is often used to simulate the outer cell membrane leaflet. And DPPC is also the main constituent of pulmonary surfactants. In this work, the DPPC monolayer was used as a model membrane to study the effect of calcium ions on the interaction between AmB and phospholipid. The influence of different concentration of calcium ions on the elastic modulus, mean molecular area increment, excess Gibbs free energy and stability of the AmB/DPPC mixed monolayer has been researched at the surface pressure of 7.5 mN/m, 12.5 mN/m and 22.5 mN/m. The AmB/DPPC monolayers at the air-water interface have been observed in real-time by Brewster angle microscope and the microstructure of the Langmuir-Blodgett monolayer films transferred onto the mica have been researched by scanning electron microscope and atomic force microscope. The results showed that calcium ions had a significant influence on the elastic modulus, mean molecular area increment, excess Gibbs free energy, stability and microstructure of the AmB/DPPC monolayer. It has been indicated that the influence of calcium ions on the interaction between AmB and DPPC molecules mainly depended on the effect of calcium ions on the orientation of AmB molecules. The calcium ions could regulate the effect of AmB to the stability of the DPPC monolayer. This regulatory role changed with the different concentrations of calcium ions and the different phase states of the monolayer. This work provides useful information to further understand the influence mechanism of calcium ions on the interaction between AmB and saturated phospholipid with -PC group, which is helpful to find out the effect mechanism of calcium ion on the interaction between AmB and the outer layer of cell membrane or pulmonary surfactants in different phase states and to understand the toxicity mechanism of AmB on the cell membrane or lungs.