Improvement of enzymatic properties and decolorization of azo dye: immobilization of horseradish peroxidase on cationic maize starch

Robust peroxidase from Bacillus mojavensis TH309: Immobilization on walnut shell hydrochar and evaluation of its potential in dye decolorization

Peroxidases have received considerable attention as a cost-effective and environmentally friendly catalyst for bioremediation. Their rapid activity loss under harsh environmental conditions and inability to be used repetitively limit their exploitation in real-world wastewater treatment. First, a peroxidase was produced extracellularly by Bacillus mojavensis TH309 and purified 8.12-fold with a final yield of 47.10 % using Sephadex G-100 superfine resin. The pure peroxidase (BmPer) possessed a relatively low molecular weight of ∼21 kDa and was active against L-DOPA on acrylamide gel after electrophoresis. BmPer was immobilized by adsorption functionalized walnut shell hydrochar (WsH) with 61.99 ± 1.34 % efficiency and 37.07 ± 4.16 % activity loss. BmPer and its immobilized form (WsH-BmPer) exhibited maximum activity at 50 °C and pH 9. WsH-BmPer exhibited 3.23-, 2.37-, 1.65-, and 2.25-fold longer half-life than BmPer at 50, 60, 70, and 80 °C, respectively. Immobilization significantly enhanced the stability of the enzyme under acidic conditions. BmPer and WsH-BmPer showed maximal activity in the presence of 1 % salt and retained more than 85 % of their activity even after pre-incubation with 2.5 M salt for 60 min at 50 °C. Their catalytic efficiency was significantly stimulated by pre-incubation with Triton X-100 (1 mM), Tween20 (1 mM), and Mg2+ (1 and 10 mM). Immobilization strongly reduced the loss of activity caused by inhibitors including Ba2+, Hg2+, and Cu2+. Moreover, both forms of the enzyme were compatible with solvents. The Michaelis constant (Km) values of BmPer and WsH-BmPer were 0.88 and 2.66 mM for 2,4 DCP, respectively. WsH-BmPer peroxidase maintained about 82 % and 85 % of its activity when stored at 4 °C for 30 days and reused for up to 10 cycles, respectively. Furthermore, it decolorized Cibacron red (CR), Poly R-478 (PR), Remazol Brilliant Blue R (RBBR), and Methyl red (MR) dyes by 60.13 %, 91.34 %, 86.41 %, and 50.51 % within 60 min, respectively.

Immobilization of Horseradish Peroxidase on Ca Alginate-Starch Hybrid Support: Biocatalytic Properties and Application in Biodegradation of Phenol Red Dye

In this study, horseradish peroxidase was extracted, purified, and immobilized on a calcium alginate-starch hybrid support by covalent bonding and entrapment. The immobilized HRP was used for the biodegradation of phenol red dye. A 3.74-fold purification was observed after precipitation with ammonium sulfate and dialysis. An immobilization yield of 88.33%, efficiency of 56.89%, and activity recovery of 50.26% were found. The optimum pH and temperature values for immobilized and free HRP were 5.0 and 50 °C and 6.5 and 60 °C, respectively. The immobilized HRP showed better thermal stability than its free form, resulting in a considerable increase in half-life time (t1/2) and deactivation energy (Ed). The immobilized HRP maintained 93.71% of its initial activity after 45 days of storage at 4 °C. Regarding the biodegradation of phenol red, immobilized HRP resulted in 63.57% degradation after 90 min. After 10 cycles of reuse, the immobilized HRP was able to maintain 43.06% of its initial biodegradative capacity and 42.36% of its enzymatic activity. At the end of 15 application cycles, a biodegradation rate of 8.34% was observed. In conclusion, the results demonstrate that the immobilized HRP is a promising option for use as an industrial biocatalyst in various biotechnological applications.

Enzyme-triggered approach to reduce water bodies' contamination using peroxidase-immobilized ZnO/SnO2/alginate nanocomposite

Enzyme immobilization on solid support offers advantages over free enzymes by overcoming characteristic limitations. To synthesize new stable and hyperactive nano-biocatalysts (co-precipitation method), ginger peroxidase (GP) was surface immobilized (adsorption) on ZnO/SnO2 and ZnO/SnO2/SA nanocomposite with immobilization efficacy of 94 % and 99 %, respectively. Thereafter, catalytic and biochemical characteristics of free and immobilized GP were investigated by deploying various techniques, i.e., FTIR, PXRD, SEM, and PL. Diffraction peaks emerged at 2θ values of 26°, 33°, 37°, 51°, 31°, 34°, 36°, 56°, indicating the formation of SnO2 and ZnO. The OH stretching of the H2O molecules was attributed to broad peaks between 3200 and 3500 cm-1, whereas ZnO/SnO2 spikes occurred in the 1626-1637 cm-1 range. SnO stretching mode and ZnO terminal vibrational patterns have been verified at corresponding wavelengths of 625 cm-1 and 560 cm-1. Enzyme entrapment onto substrate was verified via interactions between GP and ZnO/SnO2/SA as corroborated by signals beneath 1100 cm-1. GP-immobilized fractions were optimally active at pH 5, 50 °C, and retained maximum activity after storage of 4 weeks at -4 °C. Kinetic parameters were determined by using a Lineweaver-Burk plot and Vmax for free GP, ZnO/SnO2/GP and ZnO/SnO2/SA/GP with guaiacol as a substrate, were found to be 322.58, 49.01 and 11.45 (μM/min) respectively. A decrease in values of Vmax and KM indicates strong adsorption of peroxidase on support and maximum affinity between nano support and enzyme, respectively. For environmental remediation, free ginger peroxidase (GP), ZnO/SnO2/GP and ZnO/SnO2/SA/GP fractions effectively eradicated highly intricate dye. Multiple scavengers had a significant impact on the depletion of the dye. In conclusion, ZnO/SnO2 and ZnO/SnO2/SA nanostructures comprise an ecologically acceptable and intriguing carrier for enzyme immobilization.

Color-switchable and photoluminescent poly (vinyl chloride) for multifunctional smart applications

Recycled poly (vinyl chloride) (PVC) waste was used to prepare transparent material with long-lasting phosphorescence, photochromic activity, hydrophobicity, strong optical transmission, ultraviolet (UV) protection, and stiffness. Lanthanide-activated aluminate (LaA) microparticles were prepared via the high temperature solid state procedure, which were subjected to the top-down grinding technology to afford LaA nanoparticles (LaAN). Laminated poly (vinyl chloride) bottles were shredded into a transparent plastic matrix, which was combined with LaAN and drop-casted to produce smart materials for a variety of applications. Smart window and photochromic film for smart packaging can be made from recycled poly (vinyl chloride) waste by immobilizing it with various ratios of LaAN. Long-lasting phosphorescent translucent poly (vinyl chloride) smart window and films need LaAN to be evenly dispersed in PVC without clumping. Different analytical methods were employed to assess the materials' morphological structure and chemical composition. Photoluminescence and decay spectra were all employed to investigate the luminescence characteristics. In addition, the mechanical performance was studied. According to CIE Lab (Commission Internationale de L'éclairage) color measurements, this transparent PVC smart material becomes a bright green under UV rays and turns a greenish-yellow in the dark. The PVC luminescence was observed to exhibit an apparent emission bands at 429 and 513 nm when excited at 367 nm. Improvements have been monitored in the UV shielding and hydrophobicity with increasing the phosphor concentration. LaAN-immobilized PVC exhibited reversible photochromism. The present approach can be applied for a variety of applications, such as anticounterfeiting films for smart packaging, smart window, and warning lightening marks.

Adsorption of an Anionic Surfactant (Sodium Dodecyl Sulfate) from an Aqueous Solution by Modified Cellulose with Quaternary Ammonium

In this study, a method of removing an anionic surfactant sodium dodecyl sulfate (SDS) from an aqueous solution by cellulose modified with quaternary ammonium cation was discussed. Cellulose, as the adsorbent, was obtained from medical cotton balls, and the quaternary ammonium cation (synthesized from dodecyl dimethyl tertiary amine and epichlorohydrin) was grafted onto the sixth hydroxyl group of D-glucose in the cellulose by the Williamson reaction under alkaline conditions. The modified cellulose was characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS); and the zeta potential of the material was also measured after confirmation of the synthesis of quaternary ammonium salts by nuclear magnetic resonance (NMR). From these analyses, a peak of the quaternary ammonium group was observed at 1637 cm^-1; and it was found that the surface of the material exhibited a positive charge in pH 2-7. The optimal conditions for SDS adsorption by modified cellulose were pH of 7, contact time of 3 h, and temperature of 60 °C in this study. Typical adsorption isotherms (Langmuir and Freundlich) were determined for the adsorption process, and the maximal adsorption capacity was estimated as 32.5 mg g^-1. The results of adsorption kinetics were more consistent with the pseudo-second-order equation, indicating that the adsorption process was mainly controlled by chemical adsorption. Furthermore, thermodynamic analysis indicated that the adsorption process of SDS on the modified cellulose was endothermic and spontaneous and that an increasing temperature was conducive to adsorption.

Fabrication of Nanofibers Based on Hydroxypropyl Starch/Polyurethane Loaded with the Biosynthesized Silver Nanoparticles for the Treatment of Pathogenic Microbes in Wounds

Fabrication of electrospun nanofibers based on the blending of modified natural polymer, hydroxyl propyl starch (HPS) as one of the most renewable resources, with synthetic polymers, such as polyurethane (PU) is of great potential for biomedical applications. The as-prepared nanofibers were used as antimicrobial sheets via blending with biosynthesized silver nanoparticles (AgNPs), which were prepared in a safe way with low cost using the extract of Nerium oleander leaves, which acted as a reducing and stabilizing agent as well. The biosynthesized AgNPs were fully characterized by various techniques (UV-vis, TEM, DLS, zeta potential and XRD). The obtained results from UV-vis depicted that the AgNPs appeared at a wavelength equal to 404 nm affirming the preparation of AgNPs when compared with the wavelength of extract (there are no observable peaks). The average particle size of the fabricated AgNPs that mediated with HPS exhibited a very small size (less than 5 nm) with excellent stability (more than -30 mv). In addition, the fabricated nanofibers were also fully characterized and the obtained data proved that the diameter of nanofibers was enlarged with increasing the concentration of AgNPs. Additionally, the findings illustrated that the pore sizes of electrospun sheets were in the range of 75 to 350 nm. The obtained results proved that the presence of HPS displayed a vital role in decreasing the contact angle of PU nanofibers and thus, increased the hydrophilicity of the net nanofibers. It is worthy to mention that the prepared nanofibers incorporated with AgNPs exhibited incredible antimicrobial activity against pathogenic microbes that actually presented in human wounds. Moreover, P. aeruginosa was the most sensitive species to the fabricated nanofibers compared to other tested ones. The minimal inhibitory concentrations (MICs) values of AgNPs-3@NFs against P. aeruginosa, and E. faecalis, were 250 and 500 mg/L within 15 min, respectively.