Dibenzothiophene biodesulfurization in resting cell conditions by aerobic bacteria

A Study on the Potential of Valorizing Sargassum latifolium into Biofuels and Sustainable Value-Added Products

To increase the limited commercial utility and lessen the negative environmental effects of the massive growth of brown macroalgae, this work illustrates the feasibility of valorizing the invasively proliferated Sargassum latifolium into different value-added products. The proximate analysis recommends its applicability as a solid biofuel with a sufficient calorific value (14.82 ± 0.5 MJ/kg). It contains 6.00 ± 0.07% N + P2O5 + K2O and 29.61 ± 0.05% organic C. Its nutritional analysis proved notable carbohydrate, ash, protein, and fiber contents with a rational amount of lipid and a considerable amount of beneficial macronutrients and micronutrients, with a low concentration of undesirable heavy metals. That recommends its application in the organic fertilizer, food, medicine, and animal fodder industries. A proposed eco-friendly sequential integrated process valorized its biomass into 77.6 ± 0.5 mg/g chlorophyll, 180 ± 0.5 mg/g carotenoids, 5.86 ± 0.5 mg/g fucoxanthin, 0.93 ± 0.5 mg/g β-carotene, 21.97 ± 0.5% (w/w) alginate, and 16.40 ± 0.5% (w/w) cellulose, with different industrial and bioprocess applications. Furthermore, Aspergillus galapagensis SBWF1, Mucor hiemalis SBWF2, and Penicillium oxalicum SBWF3 (GenBank accession numbers OR636487, OR636488, and OR636489) have been isolated from its fresh biomass. Those showed wide versatility for hydrolyzing and saccharifying its polysaccharides. A Gram-negative Stutzerimonas stutzeri SBB1(GenBank accession number OR764547) has also been isolated with good capabilities to ferment the produced pentoses, hexoses, and mannitol from the fungal saccharification, yielding 0.25 ± 0.014, 0.26 ± 0.018, and 0.37 ± 0.020 g ethanol/g algal biomass, respectively. Furthermore, in a pioneering step for valuing the suggested sequential biomass hydrolysis and bioethanol fermentation processes, the spent waste S. latifolium disposed of from the saccharification process has been valorized into C-dots with potent biocidal activity against pathogenic microorganisms.

Bio-catalytic degradation of dibenzothiophene (DBT) in petroleum distillate (diesel) by Pseudomonas spp

Biodesulfurization (BDS) was employed in this study to degrade dibenzothiophene (DBT) which accounts for 70% of the sulfur compounds in diesel using a synthetic and typical South African diesel in the aqueous and biphasic medium. Two Pseudomonas sp. bacteria namely Pseudomonas aeruginosa and Pseudomonas putida were used as biocatalysts. The desulfurization pathways of DBT by the two bacteria were determined by gas chromatography (GC)/mass spectrometry (MS) and High-Performance Liquid Chromatography (HPLC). Both organisms were found to produce 2-hydroxy biphenyl, the desulfurized product of DBT. Results showed BDS performance of 67.53% and 50.02%, by Pseudomonas aeruginosa and Pseudomonas putida, respectively for 500 ppm initial DBT concentration. In order to study the desulfurization of diesel oils obtained from an oil refinery, resting cells studies by Pseudomonas aeruginosa were carried out which showed a decrease of about 30% and 70.54% DBT removal for 5200 ppm in hydrodesulfurization (HDS) feed diesel and 120 ppm in HDS outlet diesel, respectively. Pseudomonas aeruginosa and Pseudomonas putida selectively degraded DBT to form 2-HBP. Application of these bacteria for the desulfurization of diesel showed promising potential for decreasing the sulfur content of South African diesel oil.

Light-driven progesterone production by InP-(M. neoaurum) biohybrid system

Progesterone is one of the classical hormone drugs used in medicine for maintaining pregnancy. However, its manufacturing process, coupled with organic reagents and poisonous catalysts, causes irreversible environmental pollution. Recent advances in synthetic biology have demonstrated that the microbial biosynthesis of natural products, especially difficult-to-synthesize compounds, from building blocks is a promising strategy. Herein, overcoming the heterologous cytochrome P450 enzyme interdependency in Mycolicibacterium neoaurum successfully constructed the CYP11A1 running module to realize metabolic conversion from waste phytosterols to progesterone. Subsequently, progesterone yield was improved through strategies involving electron transfer and NADPH regeneration. Mutant CYP11A1 (mCYP11A1) and adrenodoxin reductase (ADR) were connected by a flexible linker (L) to form the chimera mCYP11A1-L-ADR to enhance electron transfer. The chimera mCYP11A1-L-ADR, adrenodoxin (ADX), and ADR-related homolog ARH1 were expressed in M. neoaurum, showed positive activity and produced 45 mg/L progesterone. This electron transfer strategy increased progesterone production by 3.95-fold compared with M. neoaurum expressing mCYP11A1, ADR, and ADX. Significantly, a novel inorganic-biological hybrid system was assembled by combining engineered M. neoaurum and InP nanoparticles to regenerate NADPH, which was increased 84-fold from the initial progesterone titer to 235 ± 50 mg/L. In summary, this work highlights the green and sustainable potential of obtaining synthetic progesterone from sterols in M. neoaurum.

Enhancing the biodesulphurization capacity of Rhodococcus sp. FUM94 in a biphasic system through optimization of operational factors

The biodesulfurization activity of bacteria through the 4S pathway in aqueous-oil emulsions is affected by various operational factors. These factors also demonstrate interacting effects that influence the potential for field applications of biodesulfurization technology and can solely be deciphered through multi-variable experiments. In this study, the effects of the influential factors and their interactions on the desulfurizing activity of a newly identified desulfurizing bacterium, Rhodococcus sp, FUM94 were quantitatively investigated. The capacity improvement achieved through optimized values obtained in this study is significant due to its simple implementation to large scale processes. This is the most simple and the most cost-effective way to scale-up a biodesulfurization process.Using response surface methodology (RSM). Optimum values of the factors were identified with the objective of maximizing biodesulfurization activity. Results revealed that the desulfurization activity of the biocatalyst increased from 0.323 ± 0.072 to 46.57 ± 4.556 mmol 2-Hydroxybiphenyl (kg dry cell weight)^-1 h^-1 at the optimized conditions of 6 h reaction time, 2 g.L^-1 biocatalyst concentration, 0.54 mM (100 ppm) dibenzothiophene (DBT) concentration (sulfur source), and 25% oil phase fraction. Desirability analysis proved that the selected conditions are the most desirable combination of factors (desirability value = 0.896) to achieve the highest biodesulfurization activity of the biocatalyst. A comparison between the biodesulfurization capacity achieved in this study and the capacities reported in similar studies published in the past two decades revealed that biodesulfurization under optimized operational conditions outperforms previously proposed techniques.

Biodesulfurization of Dibenzothiophene and Its Alkylated Derivatives in a Two-Phase Bubble Column Bioreactor by Resting Cells of Rhodococcus erythropolis IGTS8

Biodesulfurization (BDS) is considered a complementary technology to the traditional hydrodesulfurization treatment for the removal of recalcitrant sulfur compounds from petroleum products. BDS was investigated in a bubble column bioreactor using two-phase media. The effects of various process parameters, such as biocatalyst age and concentration, organic fraction percentage (OFP), and type of sulfur compound—namely, dibenzothiophene (DBT), 4-methyldibenzothiophene (4-MDBT), 4,6-dimethyldibenzothiophene (4,6-DMDBT), and 4,6-diethyldibenzothiophene (4,6-DEDBT)—were evaluated, using resting cells of Rhodococcus erythropolis IGTS8. Cells derived from the beginning of the exponential growth phase of the bacterium exhibited the highest biodesulfurization efficiency and rate. The biocatalyst performed better in an OFP of 50% v/v. The extent of DBT desulfurization was dependent on cell concentration, with the desulfurization rate reaching its maximum at intermediate cell concentrations. A new semi-empirical model for the biphasic BDS was developed, based on the overall Michaelis-Menten kinetics and taking into consideration the deactivation of the biocatalyst over time, as well as the underlying mass transfer phenomena. The model fitted experimental data on DBT consumption and 2-hydroxibyphenyl (2-HBP) accumulation in the organic phase for various initial DBT concentrations and different organosulfur compounds. For constant OFP and biocatalyst concentration, the most important parameter that affects BDS efficiency seems to be biocatalyst deactivation, while the phenomenon is controlled by the affinities of biodesulfurizing enzymes for the different organosulfur compounds. Thus, desulfurization efficiency decreased with increasing initial DBT concentration, and in inverse proportion to increases in the carbon number of alkyl substituent groups.

Biodesulfurization of refractory sulfur compounds in petro-diesel by a novel hydrocarbon tolerable strain Paenibacillus glucanolyticus HN4

One of the main precursors of air pollution and acid rains is the presence of the recalcitrant thiophenic compounds, for example dibenzothiophene (DBT) and its derivatives in transportation fuels. In an attempt to achieve the worldwide regulations of ultra-low sulfur transportation fuels without affecting its hydrocarbon skeleton, a biphasic medium containing 100 mg/L DBT dissolved in n-hexadecane (1/4 oil/water v/v) used for enrichment and isolation of selective biodesulfurizing bacterium from an oil-polluted sediment sample collected from Egyptian Red Sea shoreline. The isolated bacterium is facultative anaerobe, motile, spore-former, and mesophile. It is genetically identified as Paenibacillus glucanolyticus strain HN4 (NCBI Gene Bank Accession No. MT645230). HN4 desulfurized DBT as a model of the recalcitrant thiophenic compounds without affecting its hydrocarbon skeleton via the 4S-pathway producing 2-hydroxybiphenyl (2-HBP) as a dead end product. HN4 substantiated to be a hydrocarbon tolerant, biosurfactants(s) producer, and endorsed unique enzymatic system capable of desulfurizing broad range of thiophenic compounds and expressed an efficient desulfurization activity against the recalcitrant alkylated DBTs. As far our knowledge, it is the first reported BDS study using P. glucanolyticus. Statistical optimization based on One-Factor-At-A-Time (OFAT) technique and response surface methodology (RSM) applied for elucidation of mathematical model correlations describing and optimizing the effect of different physicochemical parameters on batch biphasic BDS process. That illustrated an approximate increase in BDS efficiency by 1.34 fold and recorded 94% sulfur removal in biphasic batch process at optimum operation conditions of 120 h, 0.14 wt% S-content model oil (DBT dissolved in n-hexadecane), 33.5 °C, pH7 and 1/1 oil/water phase ratio, and 147 rpm. Resting cells of HN4 in a biphasic reactor (1/1 v/v) decreased the sulfur content of a refractory thiophenic model oil (thiophene, benzothiophene, DBT, and alkylated DBT dissolved in n-hexadecane) from 0.14 to 0.027 wt%, and petro-diesel from 0.2 to 0.04 wt%, within 120 h, keeping the calorific value of the treated fuel intact. Consequently, that novel strain could be recommended as a promising candidate for BDS as complementary to hydrodesulfurization process in oil refinery.

Adsorptive Desulfurization of Organic Sulfur from Model Fuels by Active Carbon Supported Mn (II): Equilibrium, Kinetics, and Thermodynamics

Mn (II)/AC adsorbents were prepared by ultrasonic impregnation. The 2 wt. % Mn/AC showed best adsorptive performance, and the optimal adsorption temperature was 313 K. Benzene, methylbenzene, and naphthalene were used to explore the adsorptive selectivity of Mn/AC, indicating that Mn could enhance the adsorptive capacity but could not improve the adsorptive selectivity. The adsorptive mechanism was mostly like to be π-complex. Adsorptive isotherms and kinetics were investigated, and the parameters were calculated. The R2, RMSE, and AICc were used to assess the optimal model. The results showed that Temkin adsorptive isotherm was more suitable to describe the isothermal data; the MPnO kinetics model was more superior to other kinetic models. The order of reaction was between 1 and 2. The outcome of adsorptive thermodynamics indicated that removal of DBT onto Mn/AC was a spontaneous and exothermic process.

Investigations in enhancement biodesulfurization of model compounds by ultrasound pre-oxidation

In this study, complicated model sulfur compounds in crude oil were biodesulfurized in a batch process by microbial consortium enriched from oil contaminated soil. Dibenzothiophene (DBT) was selected as model sulfur compounds. Ultrasonic radiation was used to pre-oxidize the model sulfur compounds before the biodesulfurization (BDS) process. The enhancement mechanism of ultrasound pre-oxidation (UPO) on the biodesulfurization of DBT was investigated. The effects of initial conditions on the biodesulfurization of DBT in UPO/BDS system such as solution initial pH, DBT initial concentration, sulfur source, biocatalyst initial concentration, and incubation temperature were discussed. The results show that the application of UPO before BDS procedure significantly improved the efficiency of the biodesulfurization and allowed sulfur removal in shorter time through oxidizing DBT to DBT sulfone, resulting in shortening the "4S" pathway for biodesulfurization from 4 steps to 2 steps, enhancement in reaction velocity and enzyme-substrate affinity as well as reduction in substrate inhibition. The concentration of 2-HBP increased fast with the use of ultrasound pre-oxidation, which was dependent on solution initial pH, DBT initial concentration, sulfur source, biocatalyst initial concentration, and incubation temperature.

Prospective Approach to the Anaerobic Bioconversion of Benzo- and Dibenzothiophene Sulfones to Sulfide

Sulfur recovery from organic molecules such as toxic sulfones is an actual problem, and its solution through the use of environmentally friendly and nature-like processes looks attractive for research and application. For the first time, the possible bioconversion of organic sulfones (benzo-and dibenzothiophene sulfones) to inorganic sulfide under anaerobic conditions with simultaneous biogas production from glucose within a methanogenesis process is demonstrated. Biogas with a methane content of 50.7%-82.1% was obtained without H2S impurities. Methanogenesis with 99.7%-100% efficiency and 97.8%-100% conversion of benzo- and dibenzothiophene sulfones (up to 0.45 mM) to inorganic sulfide were obtained in eight days by using a combination of various anaerobic biocatalysts immobilized in a poly(vinyl alcohol) cryogel. Pure cell cultures of sulfate-reducing bacteria and/or H2-producing bacteria were tested as additives to the methanogenic activated sludge. The immobilized activated sludge "enhanced" by bacterial additives appeared to retain its properties and be usable multiple times for the conversion of sulfones under batch conditions.

Contribution of the Kodama and 4S pathways to the dibenzothiophene biodegradation in different coastal wetlands under different C/N ratios

Dibenzothiophene (DBT) degradation mechanisms and the transformation of pathways during the incubation of three types of coastal sediments with C/N ratios ranging from 1 to 9 were investigated. The DBT degradation efficiencies were clearly improved with increasing C/N ratio in reed wetland sediments, tidal wetlands sediments and estuary wetland sediments. The quantitative response relationships between DBT degradation rates and related functional genes demonstrate that the Kodama pathway-related gene groups were dominant factors at low C/N ratios, while the 4S-related gene groups mainly determined the degradation rate when the C/N ratio was up to 5. Network analysis also shows that the pathway shifts from the Kodama pathway to the 4S pathway occurred through changes in the connections between functional genomes and rates. Furthermore, there were competition and collaboration between the Kodama and 4S pathways. The 4S pathway-related bacteria were more active in estuary wetland sediments compared with reed wetland sediments and tidal wetland sediments. The higher degradation efficiency in estuary wetland sediments may indicate the greater participation of the 4S pathway in the DBT biodegradation reaction. And the effects of ring cleavage of Kodama pathway caused more complete metabolizing of DBT.

Construction and Characterization of a New Recombinant Vector to Remove Sulfate Repression of dsz Promoter Transcription in Biodesulfurization of Dibenzothiophene

Biodesulfurization (BDS) is an environmentally friendly desulfurizing process with the potential of replacing or adding to the current expensive technologies for sulfur removal from fossil fuels. The BDS, however, still suffers from low biocatalyst activity. One reason is repression of dsz promoter transcription in presence of inorganic sulfate that impedes translation of Dsz enzymes required for desulfurization pathway. One approach to solve this problem is replacing the native promoter with a new promoter that is no longer repressed. In this study, dsz genes from desulfurizing strain Rhodococcus sp. FUM94 was cloned in an alkane responsive promoter, pCom8, and expressed in Escherichia coli BL21 (DE3) as a host. The recombinant was not susceptible to inorganic sulfate in the culture medium. Desulfurizing activity of recombinant strain versus wild type indicated that in a sulfate containing medium, BDS yield of recombinant increased from 16.0% ± 0.9 to 34.0% ± 1.9% when dibenzothiophene (DBT) concentration (dissolved in ethanol) increased from 25 to 100 ppm. Also, 2-hydroxy biphenyl (2-HBP) production rate improved 8.5-fold (from 0.302 ± 0.020 to 2.57 ± 0.14 mmol 2-HBP (kg DCW)^-1 h^-1) at the same DBT concentration range. This is while no 2-HBP production was detected in FUM94 biphasic reaction. In a sulfate-free medium, wild type strain demonstrated desulfurization activity, but decreasing with the increase of DBT concentration dissolved in n-tetradecane. Whereas, the recombinant strain demonstrated increasing desulfurizing activity in a sulfate-containing high DBT concentration environment. Overall, the result of this molecular manipulation can be considered as a step forward toward commercialization of BDS technology.

Differential desulfurization of dibenzothiophene by newly identified MTCC strains: Influence of Operon Array

Since the sulfur specific cleavage is vital for the organic sulfur removal from fossil fuel, we explored potential bacterial strains of MTCC (Microbial Type Culture Collection) to desulfurize the Dibenzothiophene (DBT) through C-S bond cleavage (4-S pathway). MTCC strains Rhodococcus rhodochrous (3552), Arthrobacter sulfureus (3332), Gordonia rubropertincta (289), and Rhodococcus erythropolis (3951) capable of growing in 0.5 mM DBT were examined for their desulfurization ability. The presence of dsz genes as well as the metabolites was screened by polymerase chain reaction (PCR) and HPLC, respectively. All these strains showed > 99% DBT desulfurization with 10 days of incubation in minimal salt medium. From the HPLC analysis it was further revealed that these MTCC strains show differences in the end metabolites and desulfurize DBT differently following a variation in the regular 4-S pathway. These findings are also well corroborating with their respective organization of dszABC operons and their relative abundance. The above MTCC strains are capable of desulfurizing DBT efficiently and hence can be explored for biodesulfurization of petrochemicals and coal with an eco-friendly and energy economical process.

Metabolic and process engineering for biodesulfurization in Gram-negative bacteria

Microbial desulfurization or biodesulfurization (BDS) is an attractive low-cost and environmentally friendly complementary technology to the hydrotreating chemical process based on the potential of certain bacteria to specifically remove sulfur from S-heterocyclic compounds of crude fuels that are recalcitrant to the chemical treatments. The 4S or Dsz sulfur specific pathway for dibenzothiophene (DBT) and alkyl-substituted DBTs, widely used as model S-heterocyclic compounds, has been extensively studied at the physiological, biochemical and genetic levels mainly in Gram-positive bacteria. Nevertheless, several Gram-negative bacteria have been also used in BDS because they are endowed with some properties, e.g., broad metabolic versatility and easy genetic and genomic manipulation, that make them suitable chassis for systems metabolic engineering strategies. A high number of recombinant bacteria, many of which are Pseudomonas strains, have been constructed to overcome the major bottlenecks of the desulfurization process, i.e., expression of the dsz operon, activity of the Dsz enzymes, retro-inhibition of the Dsz pathway, availability of reducing power, uptake-secretion of substrate and intermediates, tolerance to organic solvents and metals, and other host-specific limitations. However, to attain a BDS process with industrial applicability, it is necessary to apply all the knowledge and advances achieved at the genetic and metabolic levels to the process engineering level, i.e., kinetic modelling, scale-up of biphasic systems, enhancing mass transfer rates, biocatalyst separation, etc. The production of high-added value products derived from the organosulfur material present in oil can be regarded also as an economically viable process that has barely begun to be explored.

Biodesulphurization of gasoline by Rhodococcus erythropolis supported on polyvinyl alcohol

A new biodesulphurization (BDS) method has been considered using Rhodococcus erythropolis supported on polyvinyl alcohol (PVA) for BDS of thiophene as a gasoline sulphur model compound in n-hexane as the solvent, subsequently this biocatalyst has been applied to BDS of gasoline samples. The obtained results according to UV-Spectrophotometer analysis at 240 nm showed that 97·41% of thiophene at the optimum condition of primary concentration 80 mg l^-1 , pH = 7, by 0·1 g of biocatalyst in 30°C and after 20 h of contact time has been degraded. These optimum conditions have been applied to gasoline BDS and the biodegradation of gasoline thiophenic compounds have been investigated by gas chromatography-mass spectrometry (GC-MS). According to GC-MS, thiophene and its 2-methyl, 3-methyl and 2- ethyl derivatives had acceptable biodegradation efficiencies of about 26·67, 21·03, 23·62% respectively. Also, benzothiophene that has been detected in a gasoline sample had 38·89% biodegradation efficiency at optimum conditions, so biomodification of PVA by R. erythropolis produces biocatalysts with an active metabolism that facilitates the interaction of bacterial strain with gasoline thiophenic compounds. The morphology and surface functional groups of supported R. erythropolis on PVA have been investigated by scanning electron microscope (SEM) and FT-IR spectroscopy respectively. SEM images suggest some regular layered shape for the supported bacteria. FT-IR spectra indicate a desirable interaction between bacterial cells and polymer supports. Also, the recovery of biocatalyst has been investigated and after three times of using in BDS activity, its biocatalytic ability had no significant decreases.

SIGNIFICANCE AND IMPACT OF THE STUDY

The biomodification of polyvinyl alcohol by Rhodococcus erythropolis described herein produces a new biocatalyst which can be used for significantly reducing the thiophenic compounds of gasoline and other fossil fuels. The immobilization process is to increase the biodegradation efficiency of cells and accelerating the biodesulphurization process.

Proteomics and Metabolomics Analyses to Elucidate the Desulfurization Pathway of Chelatococcus sp

Desulfurization of dibenzothiophene (DBT) and alkylated DBT derivatives present in transport fuel through specific cleavage of carbon-sulfur (C-S) bonds by a newly isolated bacterium Chelatococcus sp. is reported for the first time. Gas chromatography-mass spectrometry (GC-MS) analysis of the products of DBT degradation by Chelatococcus sp. showed the transient formation of 2-hydroxybiphenyl (2-HBP) which was subsequently converted to 2-methoxybiphenyl (2-MBP) by methylation at the hydroxyl group of 2-HBP. The relative ratio of 2-HBP and 2-MBP formed after 96 h of bacterial growth was determined at 4:1 suggesting partial conversion of 2-HBP or rapid degradation of 2-MBP. Nevertheless, the enzyme involved in this conversion process remains to be identified. This production of 2-MBP rather than 2-HBP from DBT desulfurization has a significant metabolic advantage for enhancing the growth and sulfur utilization from DBT by Chelatococcus sp. and it also reduces the environmental pollution by 2-HBP. Furthermore, desulfurization of DBT derivatives such as 4-M-DBT and 4, 6-DM-DBT by Chelatococcus sp. resulted in formation of 2-hydroxy-3-methyl-biphenyl and 2-hydroxy -3, 3/- dimethyl-biphenyl, respectively as end product. The GC and X-ray fluorescence studies revealed that Chelatococcus sp. after 24 h of treatment at 37°C reduced the total sulfur content of diesel fuel by 12% by per gram resting cells, without compromising the quality of fuel. The LC-MS/MS analysis of tryptic digested intracellular proteins of Chelatococcus sp. when grown in DBT demonstrated the biosynthesis of 4S pathway desulfurizing enzymes viz. monoxygenases (DszC, DszA), desulfinase (DszB), and an NADH-dependent flavin reductase (DszD). Besides, several other intracellular proteins of Chelatococcus sp. having diverse biological functions were also identified by LC-MS/MS analysis. Many of these enzymes are directly involved with desulfurization process whereas the other enzymes/proteins support growth of bacteria at an expense of DBT. These combined results suggest that Chelatococcus sp. prefers sulfur-specific extended 4S pathway for deep-desulphurization which may have an advantage for its intended future application as a promising biodesulfurizing agent.

Advances in the Reduction of the Costs Inherent to Fossil Fuels' Biodesulfurization towards Its Potential Industrial Application

Biodesulfurization (BDS) process consists on the use of microorganisms for the removal of sulfur from fossil fuels. Through BDS it is possible to treat most of the organosulfur compounds recalcitrant to the conventional hydrodesulfurization (HDS), the petroleum industry's solution, at mild operating conditions, without the need for molecular hydrogen or metal catalysts. This technique results in lower emissions, smaller residue production and less energy consumption, which makes BDS an eco-friendly process that can complement HDS making it more efficient. BDS has been extensively studied and much is already known about the process. Clearly, BDS presents advantages as a complementary technique to HDS; however its commercial use has been delayed by several limitations both upstream and downstream the process. This study will comprehensively review and discuss key issues, like reduction of the BDS costs, advances and/or challenges for a competitive BDS towards its potential industrial application aiming ultra low sulfur fuels.

Enhancement of dibenzothiophene biodesulfurization by weakening the feedback inhibition effects based on a systematic understanding of the biodesulfurization mechanism by Gordonia sp. through the potential “4S” pathway

Gordonia sp. JDZX13 (source: industrial petroleum soil) shows good potential for dibenzothiophene (DBT) biodesulfurization.

Performances, kinetics and mechanisms of catalytic oxidative desulfurization from oils

Ultra-deep desulfurization technologies are critical for cleaner oils and consequent better air quality.

A novel Bacillus pumilus-related strain from tropical landfarm soil is capable of rapid dibenzothiophene degradation and biodesulfurization

BACKGROUND

The presence of organic sulfur-containing compounds in the environment is harmful to animals and human health. The combustion of these compounds in fossil fuels tends to release sulfur dioxide in the atmosphere, which leads to acid rain, corrosion, damage to crops, and an array of other problems. The process of biodesulfurization rationally exploits the ability of certain microorganisms in the removal of sulfur prior to fuel burning, without loss of calorific value. In this sense, we hypothesized that bacterial isolates from tropical landfarm soils can demonstrate the ability to degrade dibenzothiophene (DBT), the major sulfur-containing compound present in fuels.

RESULTS

Nine bacterial isolates previously obtained from a tropical landfarm soil were tested for their ability to degrade dibenzothiophene (DBT). An isolate labeled as RR-3 has shown the best performance and was further characterized in the present study. Based on physiological aspects and 16 s rDNA sequencing, this isolate was found to be very closely related to the Bacillus pumillus species. During its growth, high levels of DBT were removed in the first 24 hours, and a rapid DBT degradation within the first hour of incubation was observed when resting cells were used. Detection of 2-hydroxybiphenyl (HBP), a marker for the 4S pathway, suggests this strain has metabolical capability for DBT desulfurization. The presence of MgSO4 in growth medium as an additional sulfur source has interfered with DBT degradation.

CONCLUSIONS

To our knowledge, this is the first study showing that a Bacillus strain can metabolize DBT via the 4S pathway. However, further evidences suggest RR-3 can also use DBT (and/or its derivative metabolites) as carbon/sulfur source through another type of metabolism. Compared to other reported DBT-degrading strains, the RR-3 isolate showed the highest capacity for DBT degradation ever described in quantitative terms. The potential application of this isolate for the biodesulfurization of this sulfur-containing compound in fuels prior to combustion was discussed.

Effect of electrokinetics on biodesulfurization of the model oil by Rhodococcus erythropolis PTCC1767 and Bacillus subtilis DSMZ 3256

Biodesulfurization of the model oil using Rhodococcus erythropolis PTCC1767 (R. erythropolis) and Bacillus subtilis DSMZ 3256 (B. subtilis) strains assisted by applying electrokinetic was investigated as a novel method for desulfurization. The yield of biodesulfurization is low because it takes long time to be completed. Electrokinetic reduces the process time and accelerates degradation of the sulfur compounds. A mixture of normal hexadecane with 10mM dibenzotiophene (DBT) was employed as the model oil. The biodesulfurization experiments were initially performed. The results represented 34% and 62% DBT conversions after 1 and 6 days by R. erythropolis and the biodesulfurization yields were 11% and 36%, respectively. However, the DBT conversions for B. subtilis strain after 1 and 6 days were 31% and 55% and the biodesulfurization yields were 9% and 31%, respectively. The electrokinetic biodesulfurization experiments were studied at different current densities and the optimum current density was selected. According to the results, DBT conversion and biodesulfurization yield for R. erythropolis after 3 days were 76% and 39%, respectively, at the current density of 7.5 mA/cm(2). At the same conditions, the DBT conversion and biodesulfurization yield for B. subtilis were 71% and 37%, respectively. The experimental results indicate that the electrokinetic significantly reduces the biodesulfurization time. The combination of electrokinetic and biodesulfurization has the potential to obtain 'zero sulfur' products.

Improvement of Biodesulfurization Rate of Alginate Immobilized Rhodococcus erythropolis R1

Background:

Sulfur oxides released from the burning of oil causes severe environmental pollution. The sulfur can be removed via the 4S pathway in biodesulfurization (BDS). Immobilization approaches have been developed to prevent cell contamination of oil during the BDS process.

Objectives:

The encapsulation of Rhodococcus erythropolis R1 in calcium alginate beads was studied in order to enhance conversion of dibenzothiophene (DBT) to 2-hydroxy biphenyl (2-HBP) as the final product. Also the effect of different factors on the BDS process was investigated.

Materials and Methods:

Calcium alginate capsules were prepared using peristaltic pumps with different needle sizes to control the beads sizes. Scanning electron microscopy and flow cytometry methods were used to study the distribution and viability of encapsulated cells, respectively. Two non-ionic surfactants and also nano Ƴ-Al₂O₃were used with the ratio of 0.5% (v/v) and 1:5 (v/v) respectively to investigate their BDS efficiency. In addition, the effect of different bead sizes and different concentrations of sodium alginate in BDS activity was studied.

Results:

The 2% (w/v) sodium alginate beads with 1.5mm size were found to be the optimum for beads stability and efficient 2-HBP production. The viability of encapsulated cells decreased by 12% after 20 h of desulfurization, compared to free cells. Adding the non-ionic surfactants markedly enhanced the rate of BDS, because of increasing mass transfer of DBT to the gel matrix. In addition, Span 80 was more effective than Tween 80. The nanoƳ-Al₂O₃ particles could increase BDS rate by up to two-folds greater than that of the control beads.

Conclusions:

The nano Ƴ-Al₂O₃ can improve the immobilized biocatalyst for excellent efficiency of DBT desulfurization. Also the BDS activity can be enhanced by setting the other explained factors at optimum levels.

Membrane transport systems and the biodegradation potential and pathogenicity of genus Rhodococcus

The Rhodococcus genus contains species with remarkable ability to tolerate toxic compounds and to degrade a myriad of substrates. These substrates have to cross a distinctive cell envelope dominated by mycolic acids anchored in a scaffold of arabinogalactan covalently attached to the cell wall peptidoglycan, and a cellular membrane with phospholipids, whose composition in fatty acids can be rapidly altered in response to environmental conditions. The hydrophobic nature of the cell envelope facilitates the entrance of hydrophobic molecules but some substrates require active transport systems. Additionally, toxic compounds may also be extruded by energy spending efflux systems. In this review, physiological evidences of the use of transport systems by Rhodococcus strains and genomic studies that corroborate their existence are presented and discussed. The recently released complete genomes of several Rhodococcus strains will be the basis for an in silico correlation analysis between the efflux pumps present in the genome and their role on active transport of substrates. These transport systems will be placed on an integrative perspective of the impact of this important genus on biotechnology and health, ranging from bioremediation to antibiotic and biocide resistance.

Exploring the mechanism of biocatalyst inhibition in microbial desulfurization

Microbial desulfurization, or biodesulfurization (BDS), of fuels is a promising technology because it can desulfurize compounds that are recalcitrant to the current standard technology in the oil industry. One of the obstacles to the commercialization of BDS is the reduction in biocatalyst activity concomitant with the accumulation of the end product, 2-hydroxybiphenyl (HBP), during the process. BDS experiments were performed by incubating Rhodococcus erythropolis IGTS8 resting-cell suspensions with hexadecane at 0.50 (vol/vol) containing 10 mM dibenzothiophene. The resin Dowex Optipore SD-2 was added to the BDS experiments at resin concentrations of 0, 10, or 50 g resin/liter total volume. The HBP concentration within the cytoplasm was estimated to decrease from 1,100 to 260 μM with increasing resin concentration. Despite this finding, productivity did not increase with the resin concentration. This led us to focus on the susceptibility of the desulfurization enzymes toward HBP. Dose-response experiments were performed to identify major inhibitory interactions in the most common BDS pathway, the 4S pathway. HBP was responsible for three of the four major inhibitory interactions identified. The concentrations of HBP that led to a 50% reduction in the enzymes' activities (IC50s) for DszA, DszB, and DszC were measured to be 60 ± 5 μM, 110 ± 10 μM, and 50 ± 5 μM, respectively. The fact that the IC50s for HBP are all significantly lower than the cytoplasmic HBP concentration suggests that the inhibition of the desulfurization enzymes by HBP is responsible for the observed reduction in biocatalyst activity concomitant with HBP generation.

Genomic structure and promoter analysis of the dsz operon for dibenzothiophene biodesulfurization from Gordonia alkanivorans RIPI90A

The bacterium Gordonia alkanivorans RIPI90A has been previously reported as dibenzothiophene-desulfurizing strain. The present study provides a complete investigation of the dsz operon including dsz promoter analysis from desulfurization competent strain belonging to the genus Gordonia. PCR was used to amplify the dszABC genes and adaptor ligation-based PCR-walking strategy used to isolate the dsz promoter. Unlike the dsz operon of Rhodococcus erythropolis, the operon of RIPI90A was located on chromosome. Despite the remarkably high homology between dsz genes of G. alkanivorans RIPI90A and R. erythropolis IGST8, promoter sequences of the strains were not very similar. The dsz promoter of G. alkanivorans RIPI90A shows only 52.5% homology to that of R. erythropolis IGTS8 and Gordonia nitida. Deletion analysis of the dsz promoter from RIPI90A using luciferase as a reporter gene revealed that the dsz promoter was located in regions from -156 to -50.

Biodesulfurization of dibenzothiophene by a newly isolated Rhodococcus erythropolis strain

A new dibenzothiophene (DBT) desulfurizing bacterium was isolated from oil-contaminated soils in Iran. HPLC analysis and PCR-based detection of the presence of the DBT desulfurization genes (dszA, dszB and dszC) indicate that this strain converts DBT to 2-hydroxybiphenyl (2-HBP) via the 4S pathway. The strain, identified as Rhodococcus erythropolis SHT87, can utilize DBT, dibenzothiophene sulfone, thiophene, 2-methylthiophene and dimethylsulfoxide as a sole sulfur source for growth at 30 degrees C. The maximum specific desulfurization activity of strain SHT87 resting cells in aqueous and biphasic organic-aqueous systems at 30 degrees C was determined to be 0.36 and 0.47 micromol 2-HBP min(-1) (gdrycell)(-1), respectively. Three mM DBT was completely metabolized by SHT87 resting cells in the aqueous and biphasic systems within 10h. The rate and the extent of the desulfurization reaction by strain SHT87 suggest that this strain can be used for the biodesulfurization of diesel oils.

Biodesulfurization of dibenzothiophene by recombinant Gordonia alkanivorans RIPI90A

The dszABC genes from newly reported dibenzothiophene biodesulfurizing bacterium, Gordonia alkanivorans RIPI90A were cloned and sequenced. The overall nucleotide sequence similarity between the dszABC genes of G. alkanivorans RIPI90A and those of Rhodococcus erythropolis IGTS8 and Gordonia nitida were 83.1% and 83.2%, respectively. A gene transfer system for G. alkanivorans RIPI90A was established employing the Escherichia coli-Rhodococcus shuttle vector pRSG43 as suitable cloning vector, resulting in transformation efficiencies up to 1.6 x 10(5)CFUs microg(-1) plasmid DNA. This stable vector was applied to cloning and efficient expression of the dsz genes under the control of lac promoter. The recombinant strain was able to desulfurize dibenzothiophene in the presence of inorganic sulfate and sulfur-containing amino acids. The maximum desulfurization activity by recombinant resting cells (131.8 microM2-hydroxybiphenylg(dry cell weight)(-1)h(-1)) was increased 2.67-fold in comparison to the highest desulfurization activity of native resting cells.

Biocatalytic desulfurization (BDS) of petrodiesel fuels

Oil refineries are facing many challenges, including heavier crude oils, increased fuel quality standards, and a need to reduce air pollution emissions. Global society is stepping on the road to zero-sulfur fuel, with only differences in the starting point of sulfur level and rate reduction of sulfur content between different countries. Hydrodesulfurization (HDS) is the most common technology used by refineries to remove sulfur from intermediate streams. However, HDS has several disadvantages, in that it is energy intensive, costly to install and to operate, and does not work well on refractory organosulfur compounds. Recent research has therefore focused on improving HDS catalysts and processes and also on the development of alternative technologies. Among the new technologies one possible approach is biocatalytic desulfurization (BDS). The advantage of BDS is that it can be operated in conditions that require less energy and hydrogen. BDS operates at ambient temperature and pressure with high selectivity, resulting in decreased energy costs, low emission, and no generation of undesirable side products. Over the last two decades several research groups have attempted to isolate bacteria capable of efficient desulfurization of oil fractions. This review examines the developments in our knowledge of the application of bacteria in BDS processes, assesses the technical viability of this technology and examines its future challenges.

Biodesulfurization of dibenzothiophene by growing cells of Pseudomonas putida CECT 5279 in biphasic media

Several studies have proven that natural or genetically modified bacteria, such as Pseudomonas putida strain, degrade recalcitrant organic sulfur compounds. However, from a practical point of view, the biodesulfurization (BDS) process has to be performed with really high proportions of organic solvents. In this work, the dibenzothiophene (DBT) was selected as recalcitrant model compound, and hexadecane as model organic solvent. It has been observed that P. putida CECT 5279 was able to desulfurize DBT even in the presence of 50% (v/v) of hexadecane. A concentration of 400 ppm of DBT was converted at a specific rate of generation of desulfurized final product, 2-hydroxybiphenyl (HBP), of 2.3 and 1.5 mg HBP L-1 (g DC L-1 h)-1 for 27% and 50% (v/v) of hexadecane, respectively. Finally, the Haldane kinetic model was used to describe the process evolution. The study is relevant as it has been proven that the strain CECT 5279 is a potential biocatalyst for developing an efficient BDS process.