Correlation of reactor performance and bacterial community composition during the removal of trimethylamine in three-stage biofilters

Preparation and Evaluation of a Composite Filler Micro-Embedded with Pseudomonas putida for the Biodegradation of Toluene : Preparation of composite filler with high toluene removal efficiency

The main objective of this study was to evaluate the performance of a self-developed filler micro-embedded with Pseudomonas putida (P. putida) for toluene removal in a biofilter under various loading rates. The results show that the biofilter could reach 85% removal efficiency (RE) on the eighth day and remain above 90% RE when the empty bed residence time (EBRT) was 18 s and the inlet loading was not higher than 41.4 g m−3 h−1. Moreover, the biofilter could tolerate substantial transient shock loadings. After two shut-down experiments, the removal efficiency could be restored to above 80% after a recovery period of three days and six days, respectively. Sequence analysis of the 16S rRNA gene of fillers in four operating periods revealed that the highly efficient bacterial colonies in fillers mainly included Firmicutes, Actinobacteria and Proteobacteria and that the abundance of Bacteroidetes increased significantly during the re-start period.

Trimethylamine abatement in algal-bacterial photobioreactors

Trimethylamine (TMA) is an odorous volatile organic compound emitted by industries. Algal-based biotechnologies have been proven as a feasible alternative for wastewater treatment, although their application to abate polluted air emissions is still scarce. This work comparatively assessed the removal of TMA in a conventional bacterial bubble column bioreactor (BC) and a novel algal-bacterial bubble column photobioreactor (PBC). The PBC exhibited a superior TMA abatement performance compared to the conventional BC. In this sense, the BC reached a removal efficiency (RE) and an elimination capacity (EC) of 78% and 12.1 g TMA m^-3 h^-1, respectively, while the PBC achieved a RE of 97% and a EC of 16.0 g TMA m^-3·h^-1 at an empty bed residence time (EBRT) of 2 min and a TMA concentration ~500 mg m^-3. The outstanding performance of the PBC allowed to reduce the operating EBRT to 1.5 and 1 min while maintaining high REs of 98 and 94% and ECs of 21.2 and 28.1 g m^-3·h^-1, respectively. Moreover, the PBC improved the quality of the gas and liquid effluents discharged, showing a net CO₂ consumption and decreasing by ~ 30% the total nitrogen concentration in the liquid effluent via biomass assimilation. A high specialization of the bacterial community was observed in the PBC, Mumia and Aquamicrobium sp. being the most abundant genus within the main phyla identified. GraphicalAbstract.

Bioaerosols emission and exposure risk of a wastewater treatment plant with A2O treatment process

The characteristics of bioaerosol emissions from wastewater treatment plants (WWTPs) have attracted extensive attention. The anaerobic-anoxic-oxic (A²O) process, which uses the activated sludge approach to wastewater treatment, is the most widely used process in WWTPs. Concentration, size distribution, population, and exposure risk from bacteria and fungi in bioaerosols of WWTPs using the A²O process were studied in this work. The results showed that the maximum concentration of airborne bacteria (1.00 × 10⁴ Colony Forming Units per cubic meter (CFU m^-3)) and fungi (1.44 ×10⁴ CFU m^-3) occurred from the facility's aerobic tank, in summer. As one of the main factors affecting bioaerosol exposure risk, particle size distribution was related to season. The study found that particles larger than 3.3 µm in diameter were detected mainly in spring and summer, while particles less than 3.3 µm were detected mainly in autumn and winter, whether bacterial aerosol or fungal aerosol. In addition, pathogenic bacteria were observed in bioaerosols from WWTPs, with 18 of the 65 species of bacteria detected found to be potentially or opportunistically pathogenic, such as Chryseobacterium, Stenotrophomonas, Alcaligenes, Micrococcus, Pantoea, Enterobacter and Escherichia-Shigella. The presence of these pathogens further increased the exposure risk from bioaerosols. The results of an inhalation risk assessment for airborne bacteria and fungi indicated that potential adverse health risks for adults mainly occurred in spring, summer, and autumn. On this basis, it was concluded that WWTP operators should set up effective bioaerosol controls as soon as possible to protect the health of workers, and of residents near the plant.

Anaerobic oxidation of methane coupled to sulfate reduction: Consortium characteristics and application in co-removal of H2S and methane

Anaerobic sludge from a sewage treatment plant was used to acclimatize microbial colonies capable of anaerobic oxidation of methane (AOM) coupled to sulfate reduction. Clone libraries and fluorescence in situ hybridization were used to investigate the microbial population. Sulfate-reducing bacteria (SRB) (e.g., Desulfotomaculum arcticum and Desulfobulbus propionicus) and anaerobic methanotrophic archaea (ANME) (e.g., Methanosaeta sp. and Methanolinea sp.) coexisted in the enrichment. The archaeal and bacterial cells were randomly or evenly distributed throughout the consortia. Accompanied by sulfate reduction, methane was oxidized anaerobically by the consortia of methane-oxidizing archaea and SRB. Moreover, CH₄ and SO₄^2- were consumed by methanotrophs and sulfate reducers with CO₂ and H₂S as products. The H₃CSH produced by methanotrophy was an intermediate product during the process. The methanotrophic enrichment was inoculated in a down-flow biofilter for the treatment of methane and H₂S from a landfill site. On average, 93.33% of H₂S and 10.71% of methane was successfully reduced in the biofilter. This study tries to provide effective method for the synergistic treatment of waste gas containing sulfur compounds and CH₄.

Odor mitigation and bacterial community dynamics in on-site biocovers at a sanitary landfill in South Korea

Unpleasant odors emitted from landfills have been caused environmental and societal problems. For odor abatement, two pilot-scale biocovers were installed at a sanitary landfill site in South Korea. Biocovers PBC1 and PBC2 comprised a soil mixture with different ratios of earthworm casts as an inoculum source and were operated for 240 days. Their odor removal efficiencies were evaluated, and their bacterial community structures were characterized using pyrosequencing. In addition, the correlation between odor removability and bacterial community dynamics was assessed using network analysis. The removal efficiency of complex odor intensity in the two biocovers ranged from 81.1% to 97.8%. Removal efficiencies of sulfur-containing odors (hydrogen sulfide, methanethiol, dimethyl sulfide, and dimethyl disulfide), which contributed most to complex odor intensity, were greater than 91% in both biocovers. Despite the fluctuations in ambient temperature (-8.2 to 31.3 °C) and inlet complex odor intensity (10,000-42,748 of odor dilution ratio), biocovers PBC1 and PBC2 displayed stable deodorizing performance. A high ratio of earthworm casts as an inoculum source led to high odor removability during the first 25 days of operation, but different mixing ratios of earthworm casts did not significantly affect overall odor removability. A bacterial community analysis showed that Methylobacter, Arthrobacter, Acinetobacter, Rhodanobacter, and Pedobacter were the dominant genera in both biocovers. Network analysis results indicated that Steroidobacter, Cystobacter, Methylosarcina, Solirubrobacter, and Pseudoxanthomonas increased in relative abundance with time and were major contributors to odor removal, although these bacteria had a relatively low abundance compared to the overall bacterial community. These data contribute to a more comprehensive understanding of the relationship between bacterial community dynamics and deodorizing performance in biocovers.

Biofiltration of xylene using wood charcoal as the biofilter media under transient and high loading conditions

The main objective of this study was to evaluate the performance of wood charcoal as biofilter media under transient and high loading condition. Biofiltration of xylene was investigated for 150days in a laboratory scale unit packed with wood charcoal and inoculated with mixed microbial culture at the xylene loading rates ranged from 12 to 553gm^-3h^-1. The kinetic analysis of the xylene revealed absence of substrate inhibition and possibility of achieving higher elimination under optimum condition. The pH, temperature, pressure drop and CO₂ production rate were regularly monitored during the experiments. Throughout experimental period, the removal efficiency (RE) was found to be in the range of 65-98.7% and the maximum elimination capacity (EC) was 405.7gm^-3h^-1. Molecular characterization results show Bacillus sp. as dominating microbial group in the biofilm.

Continuous desulfurization and bacterial community structure of an integrated bioreactor developed to treat SO2 from a gas stream

Sulfide dioxide (SO2) is often released during the combustion processes of fossil fuels. An integrated bioreactor with two sections, namely, a suspended zone (SZ) and immobilized zone (IZ), was applied to treat SO2 for 6months. Sampling ports were set in both sections to investigate the performance and microbial characteristics of the integrated bioreactor. SO2 was effectively removed by the synergistic effect of the SZ and IZ, and more than 85% removal efficiency was achieved at steady state. The average elimination capacity of SO2 in the bioreactor was 2.80g/(m(3)·hr) for the SZ and 1.50g/(m(3)·hr) for the IZ. Most SO2 was eliminated in the SZ. The liquid level of the SZ and the water content ratio of the packing material in the IZ affected SO2 removal efficiency. The SZ served a key function not only in SO2 elimination, but also in moisture maintenance for the IZ. The desired water content in IZ could be feasibly maintained without any additional pre-humidification facilities. Clone libraries of 16S rDNA directly amplified from the DNA of each sample were constructed and sequenced to analyze the community composition and diversity in the individual zones. The desulfurization bacteria dominated both zones. Paenibacillus sp. was present in both zones, whereas Ralstonia sp. existed only in the SZ. The transfer of SO2 to the SZ involved dissolution in the nutrient solution and biodegradation by the sulfur-oxidizing bacteria. This work presents a potential biological treatment method for waste gases containing hydrophilic compounds.

Investigating bacterial populations in styrene-degrading biofilters by 16S rDNA tag pyrosequencing

Microbial biofilms are essential components in the elimination of pollutants within biofilters, yet still little is known regarding the complex relationships between microbial community structure and biodegradation function within these engineered ecosystems. To further explore this relationship, 16S rDNA tag pyrosequencing was applied to samples taken at four time points from a styrene-degrading biofilter undergoing variable operating conditions. Changes in microbial structure were observed between different stages of biofilter operation, and the level of styrene concentration was revealed to be a critical factor affecting these changes. Bacterial genera Azoarcus and Pseudomonas were among the dominant classified genera in the biofilter. Canonical correspondence analysis (CCA) and correlation analysis revealed that the genera Brevundimonas, Hydrogenophaga, and Achromobacter may play important roles in styrene degradation under increasing styrene concentrations. No significant correlations (P > 0.05) could be detected between biofilter operational/functional parameters and biodiversity measurements, although biological heterogeneity within biofilms and/or technical variability within pyrosequencing may have considerably affected these results. Percentages of selected bacterial taxonomic groups detected by fluorescence in situ hybridization (FISH) were compared to results from pyrosequencing in order to assess the effectiveness and limitations of each method for identifying each microbial taxon. Comparison of results revealed discrepancies between the two methods in the detected percentages of numerous taxonomic groups. Biases and technical limitations of both FISH and pyrosequencing, such as the binding of FISH probes to non-target microbial groups and lack of classification of sequences for defined taxonomic groups from pyrosequencing, may partially explain some differences between the two methods.

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study, airborne microorganisms generated from a wastewater treatment station (WWTS) that uses an oxidation ditch process were diminished by ventilation. Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups, concentrations, size distributions, and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m³ of airborne bacteria and 926 ± 132 CFU/m³ of airborne fungi present in the WWTS bioaerosol. Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after 4 hr of air exchange. The highest removal (92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65-1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away, which led to the relatively easy reduction of bioaerosol particles 0.65-1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.

H2S removal and bacterial structure along a full-scale biofilter bed packed with polyurethane foam in a landfill site

Hydrogen sulfide accumulated under a cover film in a landfill site was treated for 7 months by a full-scale biofilter packed with polyurethane foam cubes. Sampling ports were set along the biofilter bed to investigate H2S removal and microbial characteristics in the biofilter. The H2S was removed effectively by the biofilter, and over 90% removal efficiency was achieved in steady state. Average elimination capacity of H2S was 2.21 g m(-3) h(-1) in lower part (LPB) and 0.41 g m(-3) h(-1) in upper part (UPB) of the biofilter. Most H2S was eliminated in LPB. H2S concentration varied along the polyurethane foam packed bed, the structure of the bacterial communities showed spatial variation in the biofilter, and H2S removal as well as products distribution changed accordingly. The introduction of odorants into the biofilter shifted the distribution of the existing microbial populations toward a specific culture that could metabolize the target odors.

Decomposition of dimethylamine gas with dielectric barrier discharge

The decomposition of dimethylamine (DMA) with gas under high flow rate was investigated with dielectric barrier discharge (DBD) technology. Different parameters including removal efficiency, energy yield, carbon balance and CO2 selectivity, secondary products, as well as pathways and mechanisms of DMA degradation were studied. The experimental results showed that removal efficiency of DMA depended on applied voltage and gas flow rate, but had no obvious correlation with initial concentration. Excellent energy performance was obtained using present DBD technology for DMA abatement. When experiment conditions were controlled at: gas flow rate of 14.9 m(3)/h, initial concentration of 2104 mg/m(3), applied voltage of 4.8 kV, removal efficiency of DMA and energy yield can reach 85.2% and 953.9 g/kWh, respectively. However, carbon balance (around 40%) was not ideal due to shorter residence time (about 0.1s), implying that some additional conditions should be considered to improve the total oxidation of DMA. Moreover, secondary products in outlet gas stream were detected via gas chromatogram-mass spectrum and the amounts of NO3(-) and NO2(-) were analyzed by ion chromatogram. The obtained data demonstrated that NOx might be suppressed due to reductive NH radical form DMA dissociation. The likely reaction pathways and mechanisms for the removal of DMA were suggested based on products analysis. Experimental results demonstrated the application potential of DBD as a clean technology for organic nitrogen-containing gas elimination from gas streams.

One-stage biotrickling filter for the removal of a mixture of volatile pollutants from air: performance and microbial community analysis

The biodegradation of gas-phase mixtures of methanol, α-pinene and H2S was examined in a biotrickling filter (BTF), inoculated with a microbial consortium composed of an autotrophic H2S-degrading culture, and pure strains of Candida boidinii, Rhodococcus erythropolis, and Ophiostoma stenoceras. The inlet concentrations of methanol, α-pinene and H2S varied from 0.05 to 3.3 gm(-3), 0.05 to 2.7 gm(-3), and 0.01 to 1.4 gm(-3), respectively, at empty bed residence times (EBRT) of either 38 or 26s. The maximum elimination capacities (ECmax) of the BTF were 302, 175, and 191 gm(-3)h(-1), with 100%, 67%, and >99% removal of methanol, α-pinene and H2S, respectively. The presence of methanol showed an antagonistic removal pattern for α-pinene, but the opposite did not occur. For α-pinene, inlet loading rates (ILRs) >150 gα-pinenem(-3)h(-1) affected its own removal in the BTF. The presence of H2S did not show any declining effect on the removal of both methanol and α-pinene.

Characterization of the airborne bacteria community at different distances from the rotating brushes in a wastewater treatment plant by 16S rRNA gene clone libraries

Biological risks of bioaerosols emitted from wastewater treatment processes have attracted wide attention in the recent years. However, the culture-based analysis method has been mostly adopted for detecting the bacterial community in bioaerosols, which may result in the underestimation of total microorganism concentration as not all microorganisms are cultivable. In this study, oligonucleotide fingerprinting of 16S rRNA genes was applied to reveal the composition and structure of the bacterial community in bioaerosols from an Orbal oxidation ditch in a Beijing wastewater treatment plant (WWTP). Bioaerosols were collected at different distances from the aerosol source, rotating brushes, and the sampling height was 1.5 in which is the common respiratory height of a human being. The bacterial communities of bioaerosols were diverse, and the lowest bacterial diversity was found at the sampling site just after the rotating brush rotating brush. A large proportion of bacteria in bioaerosols were affiliated with Proteobacteria and Bacteroidetes. Numerous bacteria present in the bioaerosols also emerged in water, indicating that the bacterial community in the bioaerosols was related to that of the aerosols' sources. The forced aeration of rotating brushes brought about observably distinct bacterial communities between sampling sites situated before and after the rotating brush. Isolation sources of closest relatives in bioaerosols clone libraries were associated with the aqueous environment in the WWTP. Common potential pathogens in bioaerosols as well as those not reported in previous research were also analyzed in this study. Measures should be adopted to reduce the emission of bioaerosols and prevent their exposure to workers.

Microbial structure and chemical components of aerosols caused by rotating brushes in a wastewater treatment plant

PURPOSE

Bacterial community structure and the chemical components in aerosols caused by rotating brushes in an Orbal oxidation ditch were assessed in a Beijing municipal wastewater treatment plant.

METHODS

Air samples were collected at different distances from the aerosol-generating rotating brushes. Molecular culture-independent methods were used to characterize the community structure of the airborne bacteria in each sample regardless of cell culturability. A clone library of 16S rDNA directly amplified from air DNA of each sample was constructed and sequenced to analyze the community composition and diversity. Insoluble particles and water-soluble ions emitted with microorganisms in aerosols were analysis by a scanning electron microscope together with energy dispersive X-ray spectroscopy and ion chromatogram analyzer.

RESULTS

In total, most of the identified bacteria were Proteobacteria. The majority of sequences near the rotating brushes (the main source of the bioaerosols) were Proteobacteria (62.97 %) with β-(18.52 %) and γ-(44.45 %) subgroups and Bacteroidetes (29.63 %). Complex patterns were observed for each sampling location, suggesting a highly diverse community structure, comparable to that found in water in the Orbal oxidation ditch. Accompany with microorganisms, 46.36 μg/m(3) of SO (4) (2-) , 29.35 μg/m(3) of Cl(-), 21.51 μg/m(3) of NO (3) (-) , 19.76 μg/m(3) of NH (4) (+) , 11.42 μg/m(3) of PO (4) (3-) , 6.18 μg/m(3) of NO (2) (-) , and elements of Mg, Cl, K, Na, Fe, S, and P were detected from the air near the aerosols source.

CONCLUSIONS

Differences in the structure of the bacterial communities and chemical components in the aerosols observed between sampling sites indicated important site-related variability. The composition of microorganisms in water was one of the most important sources of bacterial communities in bioaerosols. Chemical components in bioaerosols may provide a media for airborne microorganism attachment, as well as a suitable microenvironment for their growth and survival in the air. This study will be benefit for the formulation of pollution standards, especially for aerosols, that take into account plant workers' health.

Micro-environment characteristics and microbial communities in activated sludge flocs of different particle size

Microorganisms in activated sludge flocs (ASF) play important roles in the wastewater treatment process. However, the interplay between micro-environmental variation and microbial responses within ASF is poorly understood. In this study, microelectrodes and molecular culture-independent techniques were applied to detect the internal environment, microbial composition, and distribution in flocs with different particle size. Results showed dissolved oxygen (DO) concentrations within the center of the flocs were less than at the surface, and the DO concentration distributions were distinct in flocs of different particle size. With floc particle size increasing from 100 to 250 μm, the DO concentrations in the floc centers decreased 10-55%, respectively, while no distinct change was observed in flocs of less than 100 μm. Similar phenomenon occurred for the distributions of NH(4)(+) and NO(3)(-) in flocs. Microbial structure indicated bacterial compositions and distributions were heterogeneous and responded to micro-environment variation in flocs of different particle size.

Waste gas biofiltration: advances and limitations of current approaches in microbiology

As confidence in gas biofiltration efficacy grows, ever more complex malodorant and toxic molecules are ameliorated. In parallel, for many countries, emission control legislation becomes increasingly stringent to accommodate both public health and climate change imperatives. Effective gas biofiltration in biofilters and biotrickling filters depends on three key bioreactor variables: the support medium; gas molecule solubilization; and the catabolic population. Organic and inorganic support media, singly or in combination, have been employed and their key criteria are considered by critical appraisal of one, char. Catabolic species have included fungal and bacterial monocultures and, to a lesser extent, microbial communities. In the absence of organic support medium (soil, compost, sewage sludge, etc.) inoculum provision, a targeted enrichment and isolation program must be undertaken followed, possibly, by culture efficacy improvement. Microbial community process enhancement can then be gained by comprehensive characterization of the culturable and total populations. For all species, support medium attachment is critical and this is considered prior to filtration optimization by water content, pH, temperature, loadings, and nutrients manipulation. Finally, to negate discharge of fungal spores, and/or archaeal and/or bacterial cells, capture/destruction technologies are required to enable exploitation of the mineralization product CO(2).

Bacterial dynamics in steady-state biofilters: beyond functional stability

The spatial and temporal dynamics of microbial community structure and function were surveyed in duplicated woodchip-biofilters operated under constant conditions for 231 days. The contaminated gaseous stream for treatment was representative of composting emissions, included ammonia, dimethyl disulfide and a mixture of five oxygenated volatile organic compounds. The community structure and diversity were investigated by denaturing gradient gel electrophoresis on 16S rRNA gene fragments. During the first 42 days, microbial acclimatization revealed the influence of operating conditions and contaminant loading on the biofiltration community structure and diversity, as well as the limited impact of inoculum compared to the greater persistence of the endogenous woodchip community. During long-term operation, a high and stable removal efficiency was maintained despite a highly dynamic microbial community, suggesting the probable functional redundancy of the community. Most of the contaminant removal occurred in the first compartment, near the gas inlet, where the microbial diversity was the highest. The stratification of the microbial structures along the filter bed was statistically correlated to the longitudinal distribution of environmental conditions (selective pressure imposed by contaminant concentrations) and function (contaminant elimination capacity), highlighting the central role of the bacterial community. The reproducibility of microbial succession in replicates suggests that the community changes were presumably driven by a deterministic process.

Enhancing nitrogen removal in an Orbal oxidation ditch by optimization of oxygen supply: practice in a full-scale municipal wastewater treatment plant

Seven different aeration modes, in which oxygen supply was changed by adjusting the number of aerators, were designed and applied in a full-scale municipal wastewater treatment plant with Orbal oxidation ditch to investigate the influence of dissolved oxygen (DO) on nitrogen removal performance. The full-scale experiment results of 574 days showed that nitrogen removal efficiency depended on the degree of nitrification and denitrification in the outer channel, which was the largest contributor for TN removal in the Orbal oxidation ditch. Appropriate aeration control in the outer channel was essential to balance nitrification and denitrification in the Orbal oxidation ditch. When DO was as low as about 0.2 mg/L in the outer channel, the highest TN removal efficiency of 75% was obtained. Microbial analysis confirmed that aerobic and anaerobic bacteria coexisted in the outer channel. The greater species diversity and more intensive activities of these bacteria in aeration Mode V may be responsible for the higher TN removal efficiency compared with Mode III. These results suggest that different aerated conditions in the Orbal oxidation ditch might have a significant effect on microbial community characteristics and nitrogen removal efficiencies.

Removal characteristics and kinetic analysis of an aerobic vapor-phase bioreactor for hydrophobic alpha-pinene

Biofiltration is considered an effective method to control volatile organic compounds (VOCs) pollution. This study was conducted to evaluate the potential use of a bacterial biofilter packed with wood chips and peat for the removal of hydrophobic alpha-pinene. When inoculated with two pure degraders and adapted activated sludge, a removal efficiency (RE) of more than 95% was achieved after a startup period of 11 days. The maximum elimination capacity (EC) of 50 g/(m3 x hr) with RE of 94% was obtained at empty bed retention time (EBRT) of 102 sec. When higher alpha-pinene concentrations and shorter EBRTs were applied, the REs and ECs decreased significantly due to mass-transfer and biological reaction limitations. As deduced from the experimental results, approximately 74% of alpha-pinene were completely mineralized by the consortiums and the biomass yield was 0.60 g biomass/g alpha-pinene. Sequence analysis of the selected bands excised from denaturing gradient gel electrophoresis revealed that the inoculated pure cultures could be present during the whole operation, and others were closely related to bacteria being able to degrade hydrocarbons. The kinetic results demonstrated that the whole biofiltration for alpha-pinene was diffusion-limit controlled owing to its hydrophobic characteristics. These findings indicated that this bacterial biofiltration is a promising technology for the remediation of hydrophobic industrial waste gases containing alpha-pinene.

Integrating microbial ecology in bioprocess understanding: the case of gas biofiltration

Biofilters are packed-bed bioreactors where contaminants, once transferred from the gas phase to the biofilm, are oxidized by diverse and complex communities of attached microorganisms. Over the last decade, more and more studies aimed at opening the back box of biofiltration by unraveling the biodiversity-ecosystem function relationship. In this review, we report the insights provided by the microbial ecology approach in biofilters and we emphasize the parallels existing with other engineered ecosystems used for wastewater treatment, as they all constitute relevant model ecosystems to explore ecological issues. We considered three characteristic ecological indicators: the density, the diversity, and the structure of the microbial community. Special attention was paid to the temporal and spatial dynamics of each indicator, insofar as it can disclose the potential relationship, or absence of relation, with any operating or functional parameter. We also focused on the impact of disturbance regime on the microbial community structure, in terms of resistance, resilience, and memory. This literature review led to mitigated conclusions in terms of biodiversity-ecosystem function relationship. Depending on the environmental system itself and the way it is investigated, the spatial and temporal dynamics of the microbial community can be either correlated (e.g., spatial stratification) or uncoupled (e.g., temporal instability) to the ecosystem function. This lack of generality shows the limits of current 16S approach in complex ecosystems, where a functional approach may be more suitable.

Ethylene removal efficiency and bacterial community diversity of a natural zeolite biofilter

To establish an economical and environmentally friendly technology for ethylene removal from horticultural facilities and industrial point sources, a bench-scale natural zeolite biofiltration system was developed in this study. The system was evaluated for its performance in removing ethylene from an artificially contaminated air stream and characterized for its bacterial diversity under varied ethylene concentrations, and in different spatial stages of the filter. The biofilter enabled to approximately 100% remove ethylene at loading rates of 0.26-3.76 g m(-3) h(-1) when operated with inoculum containing enriched ethylene-degrading bacteria. The bacterial diversity and abundance varied with the height of the biofilter. Moreover, the occurrence and predominance of specific bacterial species varied with the concentrations of ethylene introduced into the biofilter, as observed by PCR-DGGE methods. Phylogenetic analysis indicated that the biofilter system supported a diverse community of ethylene-degrading bacteria, with high similarity to species in the classes Betaproteobacteria, Gammaproteobacteria, Bacilli, and Actinobacteria.

Simultaneous removal of hydrogen sulfide and toluene in a bioreactor: performance and characteristics of microbial community

We investigated the correlation between performance and the bacteria community composition by H2S and toluene co-treatment. Operation of the bioreactor was divided into four stages, in which the inlet concentration of toluene and H2S were gradually increased. In Stage I, toluene was the sole target compound with an average removal efficiency of 86.49%. After adding H2S in Stage II, removal efficiency of toluene decreased immediately and recovered gradually to 85.96%. When the inlet concentration of toluene and H2S was increased in Stage III and Stage IV, respectively, the average removal efficiency for toluene increased continuously from 86.31% to 87.24%. The elimination capacities of toluene increased with increasing inlet loading rates of toluene and H2S. Results of the PCR-DGGE analysis showed a turnover growth and decline of the microbial populations in the bioreactor. In Stage I, the dominant toluene-degrading bacteria mainly contained Pseudomonas sp. strain PS+ and Hydrogenophaga sp. In Stage IV, however, the dominant toluene-degrading bacteria was aciduric bacteria (Clostridium populeti). The dominant microbial community in the bioreactor enhanced the elimination capacity of toluene, and adding H2S changed the environment of microbial growth, thus resulted in an evolution of dominant microorganisms. Analyses of microbial community and their activities provides valuable information to efficiently enhance simultaneous removal of toluene and H2S in the bioreactor.

Assessing the bias linked to DNA recovery from biofiltration woodchips for microbial community investigation by fingerprinting

In this study, we explored methodological aspects of nucleic acid recovery from microbial communities involved in a gas biofilter filled with pine bark woodchips. DNA was recovered indirectly in two steps, comparing different methods: cell dispersion (crushing, shaking, and sonication) and DNA extraction (three commercial kits and a laboratory protocol). The objectives were (a) to optimize cell desorption from the packing material and (b) to compare the 12 combinations of desorption and extraction methods, according to three relevant criteria: DNA yield, DNA purity, and community structure representation by denaturing gradient gel electrophoresis (DGGE). Cell dispersion was not influenced by the operational parameters tested for shaking and blending, while it increased with time for sonication. DNA extraction by the laboratory protocol provided the highest DNA yields, whereas the best DNA purity was obtained by a commercial kit designed for DNA extraction from soil. After successful PCR amplification, the 12 methods did not generate the same bias in microbial community representation. Eight combinations led to high diversity estimation, independently of the experimental procedure. Among them, six provided highly similar DGGE profiles. Two protocols generated a significantly dissimilar community profile, with less diversity. This study highlighted the crucial importance of DNA recovery bias evaluation.

A novel integrated step-feed biofilm process for the treatment of decentralized domestic wastewater in rural areas of China

For wastewater treatment in rural areas, a novel three-stage step-feed wastewater treatment system, combined with a drop-aeration biofilm process, was tested in the laboratory to investigate its performance in removing suspended solids (SS), chemical oxygen demand (COD), NH4(+)-N, total nitrogen (TN), and total phosphorus (TP). The removal rates of SS, COD and NH4(+)-N were 90%, 80%, and 90% in effluent concentrations less than 10 mg/L, 50 mg/L and 8 mg/L, respectively. The TP removal rate was less satisfactory. The C/N ratio in the raw wastewater was often less than 3.5, and the removal efficiency of TN was therefore limited. A carbon-release batch experiment was carried out to measure the feasibility of enhancing denitrification at low influent C/N ratios. The result showed that the C/N could be over 9.0 in the supernatant. Polymerase chain reaction denaturing gradient gel electrophoresis technology was used to reveal the changes in the bacterial community during different stages of the integrated step-feed biofilm process. The results showed that banding patterns and the distribution of dominant bands for the same experimental period in different aerobic zones were similar. Phylogenetic analysis indicated that lanes 10, 11 and 12, which presented three aerobic zones at the same operation period, had the closest phylogenetic relationship among the lanes.

Effect of sulfate absence and nitrate addition on bacterial community in a sulfidogenic bioreactor

The characteristics and behavior of sulfate-reducing bacteria (SRB), methane-producing bacteria (MPB) and denitrifying bacteria (DB) were investigated by polymerase chain reaction (PCR) based methods under the transitory sulfate absence or nitrate addition conditions in a sulfidogenic continuously stirred tank reactor. The bioreactor started-up feeding with 4000 mg l(-1) COD (lactate) and 2000 mg l(-1) sulfate (SO(4)(2-)). The sulfate removal efficiency reached 3.84 g l(-1)d(-1) when the activated sludge formed a stable bacterial community comprising of some members of genera Desulfobulbus, Desulfovibrio, Clostridium and Pseudomonas after 20 days' operation. And about 79% of reduced sulfate captured electrons from the oxidization of propionate. Sulfate absence influenced little on quantity and population structure of SRB and DB, while much on MPB and metabolic typing. And the acetate (up to 86% (w/w) of total end-products) in end-product profiles was replaced by the propionate (75% (w/w)). The addition of nitrate to sulfidogenic system suppressed the sulfidogenesis mainly by capturing the electron flow. These results suggested that sulfate absence or nitrate addition would not inhibit SRB permanently in a stable sulfidogenic community.

Effect of hypersaline aniline-containing pharmaceutical wastewater on the structure of activated sludge-derived bacterial community

In order to explore the effect of hypersaline aniline-containing pharmaceutical wastewater on the structure of activated sludge-derived bacterial community, RAPD-PCR and PCR-DGGE techniques were used to analyze the change of bacterial community diversity and structure during the acclimation to different concentrations of two types of wastewater. Different bacterial community structures and significant shift in the bacterial community diversity were observed during the acclimation of wastewater. The number of bacterial species and the abundance of bacteria acclimated to different concentration of wastewater decreased when the concentration increased. The trends of bacterial community diversity indices revealed by RAPD or DGGE profiles were different. The change of bacterial community diversity might be due to the adaptation and mutation under selection issues in the acclimation of wastewater. The relationship between diversity indices and the content of chemical oxygen demand (COD), chloride, salinity and aniline based on RAPD and DGGE data indicated that the change of the bacterial community diversity might not be due to a single factor but might be due to the integrated effects of all the contaminants in the wastewater. Phylogenic trees based on RAPD and DGGE fingerprints were different, indicating that the effect of wastewaters A and B on the bacterial community structure was different, which might be due to the characteristics of wastewater.