Recent developments in urea biosensors

Electrochemical biosensors for dopamine

Dopamine (DA), a key catecholamine, plays a pivotal role in the regulation of human cognition and emotions. It has profound effects on the hormonal, memory, and cardiovascular systems. Anomalies like Alzheimer's, Parkinson's, schizophrenia, and senile dementia are linked to abnormal DA levels. Consequently, the precise determination of DA levels in biological systems is critical for the accurate diagnosis and treatment of these disorders. Among all analytical techniques, electrochemical studies provide the most selective and highly sensitive methods for detecting DA in biological samples. Ascorbic acid and uric acid are two examples of small biomolecules that can obstruct the detection of DA in biological fluids. To address this issue, numerous attempts have been made to modify bare electrodes to separate the signals of these substances and enhance the electrocatalytic activity towards DA. Various surface modifiers, including coatings, conducting polymers, ionic liquids, nanomaterials, and inorganic complexes, have been employed in the modification process. Despite the reported success in DA detection using electrochemical sensors, many of these approaches are deemed too complex and costly for real-world applications. Therefore, this review aims to provide an overview of DA electrochemical biosensors that are practical for real-world applications.

Urea biosensors based in zeolites and chalcogenide-oxide semiconductor thin films as active materials: A review

Diagnosis of renal failure by measuring urea levels has been a topic of intense study in recent years. A major focus has been on improving the sensitivity, linearity, precision, accuracy, and selectivity of biosensors for measuring urea. Although various materials have been used in the fabrication of urea biosensors, ceramics, and chalcogenides have been less explored in this field. Recently, the use of ceramics such as zeolite has been investigated to improve enzyme immobilization methods in urea biosensors and their application in ion-selective membranes, to increase the specificity of the devices. While oxides have been widely used as transducers in urea biosensors, chalcogenide semiconductor materials from Group VI of the periodic table also show promising properties, such as chemical stability, to signal transduction capability, and improved electrical measurements. This review provides a comprehensive overview of recent research in urea biosensors, with a special emphasis on the use of ceramics for enzyme immobilization and chalcogenides as transducers and how these materials contribute to improving the performance of these devices.

In Situ Measurement of Urea Concentration With an In-Fiber SPR-MZI Sensor

A fiber-optic urea sensor based on surface plasmon resonance (SPR) and Mach-Zehnder interference (MZI) combined principle was designed and implemented. By plating gold film on the single-mode-no-core-thin-core-single-mode fiber structure, we successfully excited both SPR and MZI, and constructed two parallel detection channels for simultaneously measurement of urea concentration and temperature. Urease was immobilized on the gold film by metal-organic zeolite skeleton (ZIF-8), which can not only fix a large number of urease to improve measurement sensitivity of urea, but also protect urease activity to ensure the sensor stability. Experimental results indicate that the designed urea sensor with temperature compensation function can detect urea solution with concentration of 1-9 mM, and the sensitivity is 1.4 nm/mM. The proposed measurement method provides a new choice for monitoring urea concentration in the field of medical diagnosis and human health monitoring.

Synthesis of nickel-sphere coated Ni-Mn layer for efficient electrochemical detection of urea

Using a trustworthy electrochemical sensor in the detection of urea in real blood samples received a great attention these days. A thin layer of nickel-coated nickel-manganese (Ni@NiMn) is electrodeposited on a glassy carbon electrode (GC) (Ni@NiMn/GC) surface and used to construct the electrochemical sensor for urea detection. Whereas, electrodeposition is considered as strong technique for the controllable synthesis of nanoparticles. Thus, X-ray diffraction (XRD), atomic force microscope (AFM), and scanning electron microscope (SEM) techniques were used to characterize the produced electrode. AFM and SEM pictures revealed additional details about the surface morphology, which revealed a homogenous and smooth coating. Furthermore, electrochemical research was carried out in alkaline medium utilizing various electrochemical methods, including cyclic voltammetry (CV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). The electrochemical investigations showed that the electrode had good performance, high stability and effective charge transfer capabilities. The structural, morphological, and electrochemical characteristics of Ni@NiMn/GC electrodes were well understood using the analytical and electrochemical techniques. The electrode showed a limit of detection (LOD) equal to 0.0187 µM and a linear range of detection of 1.0-10 mM of urea. Furthermore, real blood samples were used to examine the efficiency of the prepared sensor. Otherwise, the anti-interfering ability of the modified catalyst was examined toward various interfering species.

Urea catalytic oxidation for energy and environmental applications

Urea is one of the most essential reactive nitrogen species in the nitrogen cycle and plays an indispensable role in the water-energy-food nexus. However, untreated urea or urine wastewater causes severe environmental pollution and threatens human health. Electrocatalytic and photo(electro)catalytic urea oxidation technologies under mild conditions have become promising methods for energy recovery and environmental remediation. An in-depth understanding of the reaction mechanisms of the urea oxidation reaction (UOR) is important to design efficient electrocatalysts/photo(electro)catalysts for these technologies. This review provides a critical appraisal of the recent advances in the UOR by means of both electrocatalysis and photo(electro)catalysis, aiming to comprehensively assess this emerging field from fundamentals and materials, to practical applications. The emphasis of this review is on the design and development strategies for electrocatalysts/photo(electro)catalysts based on reaction pathways. Meanwhile, the UOR in natural urine is discussed, focusing on the influence of impurity ions. A particular emphasis is placed on the application of the UOR in energy and environmental fields, such as hydrogen production by urea electrolysis, urea fuel cells, and urea/urine wastewater remediation. Finally, future directions, prospects, and remaining challenges are discussed for this emerging research field. This critical review significantly increases the understanding of current progress in urea conversion and the development of a sustainable nitrogen economy.

Multiplexed cell-based diagnostic devices for detection of renal biomarkers

The number of synthetic biology-based solutions employed in the medical industry is growing every year. The whole cell biosensors being one of them, have been proven valuable tools for developing low-cost, portable, personalized medicine alternatives to conventional techniques. Based on this concept, we targeted one of the major health problems in the world, Chronic Kidney Disease (CKD). To do so, we developed two novel biosensors for the detection of two important renal biomarkers: urea and uric acid. Using advanced gene expression control strategies, we improved the operational range and the response profiles of each biosensor to meet clinical specifications. We further engineered these systems to enable multiplexed detection as well as an AND-logic gate operating system. Finally, we tested the applicability of these systems and optimized their working dynamics inside complex medium human blood serum. This study could help the efforts to transition from labor-intensive and expensive laboratory techniques to widely available, portable, low-cost diagnostic options.

A Sensitive Electrochemiluminescence Urea Sensor for Dynamic Monitoring of Urea Transport in Living Cells

A multiple signal-amplified electrochemiluminescence (ECL) urea sensor was designed based on a self-enhanced probe and SiO₂ photonic crystals for dynamic tracking of urea transmembrane transport. The self-enhanced probe (AuNR@Ru-LA) prepared by loading polyethyleneimine (PEI), lactobionic acid (LA), and Ru(dcbpy)₃²⁺ on gold nanorods (AuNRs) generated an initial ECL signal, and then the intensity was multiple-amplified by the enhanced light-scattering effect of SiO₂ photonic crystals and the co-reaction with urea. The as-prepared sensor exhibited excellent performance for the detection of urea in the range of 1.0 × 10^-10 to 1.0 × 10^-4 M with a detection limit of 8.8 × 10^-11 M at (3σ)/S. The AuNR@Ru-LA probes were labeled on HepG2 cells to construct a cytosensor with a detection range of 1.0 × 10³ to 2.0 × 10⁶ cells mL^-1. In addition, the dynamic changes of the extracellular urea concentration were tracked by monitoring the ECL signal of the cytosensor to study urea transmembrane transport. The developed strategy realized the amplification of multiple ECL signals and the tracking of urea transmembrane transport, which provided a novel dynamic detection method for small biomolecules.

A pH-responsive ratiometric fluorescence system based on AIZS QDs and azamonardine for urea detection

Herein, a ratiometric fluorescent nanoprobe was strategically fabricated using pH-sensitive azamonardine (Aza) as a pH indicator and pH-insensitive AIZS QDs as a reference fluorescence signal for urea activity determination and pH sensing. As the pH changed from 9.7 to 11.7, the resorcinol could react with dopamine to form the cyclization product (Aza), producing a fluorescence signal at 455 nm. Meanwhile, the fluorescence intensity of AIZS QDs at 566 nm remained unchanged. Thus, the ratio of the fluorescence intensity (F₄₅₅/F₅₆₆) was able to quantify pH value. Our designed pH-sensing platform showed a linear respond to pH values in the range of 9.7 to 11.7 at intervals of 0.2. In addition, the hydrolysis of urea by urease caused an increase of the system pH value, which can be used to measure the concentration of urea. The developed method for urea determination exhibited a good linear relationship from 0.02 to 20 mM and the limit of detection was 0.0103 mM. Moreover, the practical application was confirmed by urea analysis in real water sample with high feasibility and accuracy, indicating the great application prospects of this sensing platform for urea activity analysis.

Laser-induced graphene (LIG)-driven medical sensors for health monitoring and diseases diagnosis

Laser-induced graphene (LIG) is a class of three-dimensional (3D) porous carbon nanomaterial. It can be prepared by direct laser writing on some polymer materials in the air. Because of its features of simplicity, fast production, and excellent physicochemical properties, it was widely used in medical sensing devices. This minireview gives an overview of the characteristics of LIG and LIG-driven sensors. Various methods for preparing graphene were compared and discussed. The applications of the LIG in biochemical sensors for ions, small molecules, microRNA, protein, and cell detection were highlighted. LIG-based physical physiological sensors and wearable electronics for medical applications were also included. Finally, our insights into current challenges and prospects for LIG-based medical sensing devices were presented.

Highly Sensitive and Transparent Urea-EnFET Based Point-of-Care Diagnostic Test Sensor with a Triple-Gate a-IGZO TFT

In this study, we propose a highly sensitive transparent urea enzymatic field-effect transistor (EnFET) point-of-care (POC) diagnostic test sensor using a triple-gate amorphous indium gallium zinc oxide (a-IGZO) thin-film pH ion-sensitive field-effect transistor (ISFET). The EnFET sensor consists of a urease-immobilized tin-dioxide (SnO₂) sensing membrane extended gate (EG) and an a-IGZO thin film transistor (TFT), which acts as the detector and transducer, respectively. To enhance the urea sensitivity, we designed a triple-gate a-IGZO TFT transducer with a top gate (TG) at the top of the channel, a bottom gate (BG) at the bottom of the channel, and a side gate (SG) on the side of the channel. By using capacitive coupling between these gates, an extremely high urea sensitivity of 3632.1 mV/pUrea was accomplished in the range of pUrea 2 to 3.5; this is 50 times greater than the sensitivities observed in prior works. High urea sensitivity and reliability were even obtained in the low pUrea (0.5 to 2) and high pUrea (3.5 to 5) ranges. The proposed urea-EnFET sensor with a triple-gate a-IGZO TFT is therefore expected to be useful for POC diagnostic tests that require high sensitivity and high reliability.

Urea biosensors: A comprehensive review

Present study is specially designed for the recent advances in biosensors to detect and quantify urea concentration. Urea (carbamide) is an organic compound made up of the carbonyl (C=O) functional group with two -NH₂ groups having chemical formula CO (NH₂ )₂ . In nature, urea is found everywhere as the result of various processes, and in the human body, urea is an end product of nitrogen metabolism. An excessive concentration of urea in the human body is responsible for different critical diseases such as indigestion, acidity, ulcers, cancer, malfunctioning of kidneys, renal failure, urinary tract obstruction, dehydration, shock, burns, gastrointestinal bleeding, and so on. Moreover, below the normal level may cause hepatic failure, nephritic syndrome, cachexia, and so on. As well as in various fields such as fishery, dairy, food preservation, agriculture, and so on, urea is normally found and its detection is necessary. In urea biosensors, enzyme urease (Urs) is used as a bioreceptor element and retains its long last activity is the critical issue in front of the researcher. During recent decades, different nanoparticles (zinc oxide, nickel oxide, iron oxide, titanium dioxide, tin(IV) oxide, etc.), conducting polymer (polyaniline, polypyrrole, etc.), conducting polymer-nanoparticles composites, carbon materials (carbon nanotubes, graphene oxide, reduced graphene oxide graphene), and so on are used in urea biosensors. The main emphasis of the present study is to provide cumulative and comprehensive information about the sensing parameters of urea biosensors based on the materials used for enzyme immobilization. Besides this special task, this review provides a fruitful discussion on the basics of biosensors briefly for new and upcoming researchers. Thus, the present study may act as a gift for a large audience that come from different fields and are working in biosensors research.

Efficient Portable Urea Biosensor Based on Urease Immobilized Membrane for Monitoring of Physiological Fluids

Numerous studies have addressed the utilization of glutaraldehyde (GA) as a homobifunctional cross-linker. However, its applicability has been impeded due to several issues, including the tendency of GA molecules to undergo polymerization. Herein, a portable urea biosensor was developed for the real-time monitoring of the flow of physiological fluids; this was achieved by using disuccinimidyl cross-linker-based urease immobilization. Urease was immobilized on a porous polytetrafluoroethylene (PTFE) solid support using different disuccinimidyl cross-linkers, namely disuccinimidyl glutarate (DSG), disuccinimidyl suberate (DSS) and bis-N-succinimidyl-(pentaethylene glycol) ester (BS(PEG)₅). A urease activity test revealed that DSS exhibited the highest urease immobilizing efficiency, whereas FT-IR analysis confirmed that urease was immobilized on the PTFE membrane via DSS cross-linking. The membrane was inserted in a polydimethylsiloxane (PDMS) fluidic chamber that generated an electrochemical signal in the presence of a flowing fluid containing urea. Urea samples were allowed to flow into the urea biosensor (1.0 mL/min) and the signal was measured using chronoamperometry. The sensitivity of the DSS urea biosensor was the highest of all the trialed biosensors and was found to be superior to the more commonly used GA cross-linker. To simulate real-time monitoring in a human patient, flowing urea-spiked human serum was measured and the effective urease immobilization of the DSS urea biosensor was confirmed. The repeatability and interference of the urea biosensor were suitable for monitoring urea concentrations typically found in human patients.

The Synergy of Thermally Reduced Graphene Oxide in Amperometric Urea Biosensor: Application for Medical Technologies

Thermally reduced graphene oxide (TRGO) is a graphene-based nanomaterial that has been identified as promising for the development of amperometric biosensors. Urease, in combination with TRGO, allowed us to create a mediator-free amperometric biosensor with the intention of precise detection of urea in clinical trials. Beyond simplicity of the technology, the biosensor exhibited high sensitivity (2.3 ± 0.1 µA cm⁻² mM⁻¹), great operational and storage stabilities (up to seven months), and appropriate reproducibility (relative standard deviation (RSD) about 2%). The analytical recovery of the TRGO-based biosensor in urine of 101 ÷ 104% with RSD of 1.2 ÷ 1.7% and in blood of 92.7 ÷ 96.4%, RSD of 1.0 ÷ 2.5%, confirmed that the biosensor is acceptable and reliable. These properties allowed us to apply the biosensor in the monitoring of urea levels in samples of urine, blood, and spent dialysate collected during hemodialysis. Accuracy of the biosensor was validated by good correlation (R = 0.9898 and R = 0.9982) for dialysate and blood, utilizing approved methods. The advantages of the proposed biosensing technology could benefit the development of point-of-care and non-invasive medical instruments.

An AgNP-deposited commercial electrochemistry test strip as a platform for urea detection

We developed an inexpensive, portable platform for urea detection via electrochemistry by depositing silver nanoparticles (AgNPs) on a commercial glucose test strip. We modified this strip by first removing the enzymes from the surface, followed by electrodeposition of AgNPs on one channel (working electrode). The morphology of the modified test strip was characterized by Scanning Electron Microscopy (SEM), and its electrochemical performance was evaluated via Cyclic Voltammetry (CV) and Electrochemical Impedance Spectroscopy (EIS). We evaluated the performance of the device for urea detection via measurements of the dependency of peak currents vs the analyte concentration and from the relationship between the peak current and the square root of the scan rates. The observed linear range is 1-8 mM (corresponding to the physiological range of urea concentration in human blood), and the limit of detection (LOD) is 0.14 mM. The selectivity, reproducibility, reusability, and storage stability of the modified test strips are also reported. Additional tests were performed to validate the ability to measure urea in the presence of confounding factors such as spiked plasma and milk. The results demonstrate the potential of this simple and portable EC platform to be used in applications such as medical diagnosis and food safety.

NiCo2O4 Nano-/Microstructures as High-Performance Biosensors: A Review

Non-enzymatic biosensors based on mixed transition metal oxides are deemed as the most promising devices due to their high sensitivity, selectivity, wide concentration range, low detection limits, and excellent recyclability. Spinel NiCo2O4 mixed oxides have drawn considerable attention recently due to their outstanding advantages including large specific surface area, high permeability, short electron, and ion diffusion pathways. Because of the rapid development of non-enzyme biosensors, the current state of methods for synthesis of pure and composite/hybrid NiCo2O4 materials and their subsequent electrochemical biosensing applications are systematically and comprehensively reviewed herein. Comparative analysis reveals better electrochemical sensing of bioanalytes by one-dimensional and two-dimensional NiCo2O4 nano-/microstructures than other morphologies. Better biosensing efficiency of NiCo2O4 as compared to corresponding individual metal oxides, viz. NiO and Co3O4, is attributed to the close intrinsic-state redox couples of Ni3+/Ni2+ (0.58 V/0.49 V) and Co3+/Co2+ (0.53 V/0.51 V). Biosensing performance of NiCo2O4 is also significantly improved by making the composites of NiCo2O4 with conducting carbonaceous materials like graphene, reduced graphene oxide, carbon nanotubes (single and multi-walled), carbon nanofibers; conducting polymers like polypyrrole (PPy), polyaniline (PANI); metal oxides NiO, Co3O4, SnO2, MnO2; and metals like Au, Pd, etc. Various factors affecting the morphologies and biosensing parameters of the nano-/micro-structured NiCo2O4 are also highlighted. Finally, some drawbacks and future perspectives related to this promising field are outlined.

Parylene-Coated Polytetrafluoroethylene-Membrane-Based Portable Urea Sensor for Real-Time Monitoring of Urea in Peritoneal Dialysate

A portable urea sensor for use in fast flow conditions was fabricated using porous polytetrafluoroethylene (PTFE) membranes coated with amine-functionalized parylene, parylene-A, by vapor deposition. The urea-hydrolyzing enzyme urease was immobilized on the parylene-A-coated PTFE membranes using glutaraldehyde. The urease-immobilized membranes were assembled in a polydimethylsiloxane (PDMS) fluidic chamber, and a screen-printed carbon three-electrode system was used for electrochemical measurements. The success of urease immobilization was confirmed using scanning electron microscopy, and fourier-transform infrared spectroscopy. The optimum concentration of urease for immobilization on the parylene-A-coated PTFE membranes was determined to be 48 mg/mL, and the optimum number of membranes in the PDMS chamber was found to be eight. Using these optimized conditions, we fabricated the urea biosensor and monitored urea samples under various flow rates ranging from 0.5 to 10 mL/min in the flow condition using chronoamperometry. To test the applicability of the sensor for physiological samples, we used it for monitoring urea concentration in the waste peritoneal dialysate of a patient with chronic renal failure, at a flow rate of 0.5 mL/min. This developed urea biosensor is considered applicable for (portable) applications, such as artificial kidney systems and portable dialysis systems.

Enzyme-Functionalized Piezoresistive Hydrogel Biosensors for the Detection of Urea

Urea is used in a wide variety of industrial applications such as the production of fertilizers. Furthermore, urea as a metabolic product is an important indicator in biomedical diagnostics. For these applications, reliable urea sensors are essential. In this work, we present a novel hydrogel-based biosensor for the detection of urea. The hydrolysis of urea by the enzyme urease leads to an alkaline pH change, which is detected with a pH-sensitive poly(acrylic acid-co-dimethylaminoethyl methacrylate) hydrogel. For this purpose, the enzyme is physically entrapped during polymerization. This enzyme-hydrogel system shows a large sensitivity in the range from 1 mmol/L up to 20 mmol/L urea with a high long-term stability over at least eight weeks. Furthermore, this urea-sensitive hydrogel is highly selective to urea in comparison to similar species like thiourea or N-methylurea. For sensory applications, the swelling pressure of this hydrogel system is transformed via a piezoresistive pressure sensor into a measurable output voltage. In this way, the basic principle of hydrogel-based piezoresistive urea biosensors was demonstrated.

Synthesis of gold nanocluster-loaded lysozyme nanoparticles for label-free ratiometric fluorescent pH sensing: applications to enzyme–substrate systems and cellular imaging

We have demonstrated the synthesis of gold nanocluster-loaded lysozyme nanoparticles as a dual-emission probe for ratiometric sensing of pH changes in enzyme–substrate systems and live cells.

Ultrathin nickel-metal–organic framework nanobelt based electrochemical sensor for the determination of urea in human body fluids

Ni-MOF ultrathin nanobelts in alkaline media can be used as an efficient catalyst for urea electrooxidation.

First Generation Amperometric Biosensing of Galactose with Xerogel-Carbon Nanotube Layer-By-Layer Assemblies

A first-generation amperometric galactose biosensor has been systematically developed utilizing layer-by-layer (LbL) construction of xerogels, polymers, and carbon nanotubes toward a greater fundamental understanding of sensor design with these materials and the potential development of a more efficient galactosemia diagnostic tool for clinical application. The effect of several parameters (xerogel silane precursor, buffer pH, enzyme concentration, drying time and the inclusion of a polyurethane (PU) outer layer) on galactose sensitivity were investigated with the critical nature of xerogel selection being demonstrated. Xerogels formed from silanes with medium, aliphatic side chains were shown to exhibit significant enhancements in sensitivity with the addition of PU due to decreased enzyme leaching. Semi-permeable membranes of diaminobenzene and resorcinol copolymer and Nafion were used for selective discrimination against interferent species and the accompanying loss of sensitivity with adding layers was countered using functionalized, single-walled carbon nanotubes (CNTs). Optimized sensor performance included effective galactose sensitivity (0.037 μA/mM) across a useful diagnostic concentration range (0.5 mM to 7 mM), fast response time (~30 s), and low limits of detection (~80 μM) comparable to literature reports on galactose sensors. Additional modification with anionic polymer layers and/or nanoparticles allowed for galactose detection in blood serum samples and additional selectivity effectiveness.

EGFET-Based Sensors for Bioanalytical Applications: A Review

Since the 1970s, a great deal of attention has been paid to the development of semiconductor-based biosensors because of the numerous advantages they offer, including high sensitivity, faster response time, miniaturization, and low-cost manufacturing for quick biospecific analysis with reusable features. Commercial biosensors have become highly desirable in the fields of medicine, food, and environmental monitoring as well as military applications, whereas increasing concerns about food safety and health issues have resulted in the introduction of novel legislative standards for these sensors. Numerous devices have been developed for monitoring biological processes such as nucleic acid hybridization, protein–protein interaction, antigen–antibody bonds, and substrate–enzyme reactions, just to name a few. Since the 1980s, scientific interest moved to the development of semiconductor-based devices, which also include integrated front-end electronics, such as the extended-gate field-effect transistor (EGFET) biosensor, one of the first miniaturized chemical sensors. This work is intended to be a review of the state of the art focused on the development of biosensors and chemosensors based on extended-gate field-effect transistor within the field of bioanalytical applications, which will highlight the most recent research reported in the literature. Moreover, a comparison among the diverse EGFET devices will be presented, giving particular attention to the materials and technologies.

Extracellular urease from Arthrobacter creatinolyticus MTCC 5604: scale up, purification and its cytotoxic effect thereof

Urease is a potent metalloenzyme with diverse applications. This paper describes the scale up and purification of an extracellular urease from Arthrobacter creatinolyticus MTCC 5604. The urease production was scaled-up in 3.7 L and 20 L fermentor. A maximum activity of 27 and 27.8 U/mL and a productivity of 0.90 and 0.99 U/mL/h were obtained at 30 h and 28 h in 3.7 and 20 L fermentor, respectively. Urease was purified to homogeneity with 49.85-fold purification by gel filtration and anion exchange chromatography with a yield of 36% and a specific activity of 1044.37 U/mg protein. The enzyme showed three protein bands with molecular mass of 72.6, 11.2 and 6.1 kDa on SDS-PAGE and ~ 270 kDa on native PAGE. The cytotoxic effect of urease was assessed in vitro using cancer cell lines (A549 and MG-63) and normal cell line (HEK 293). Urease showed its inhibitory effects on cancer cell lines through the generation of toxic ammonia, which in turn increased the pH of the surrounding medium. This increase in extracellular pH, enhanced the cytotoxic effect of weak base chemotherapeutic drugs, doxorubicin (50 µM) and vinblastine (100 µM) in the presence of urease (5 U/mL) and urea (0-4 mM) significantly.

Determination of urea with special emphasis on biosensors: A review

Urea is the major end product of nitrogen metabolism in humans, which is eliminated from the body mainly by the kidneys through urine but is also secreted in body fluids such as blood and saliva. Its level in urine ranges from 7 to 20 mg/dL, which drastically rises under patho-physiological conditions thus providing key information of renal function and diagnosis of various kidney and liver disorders. Increase in urea levels in blood, also referred to as azotemia or uremia. The chronic kidney disease (CKD) or end stage renal disease (ESRD) is generally caused due to the progressive loss of kidney function. Hence, there is an urgent need of determination of urea in biological fluids to diagnose these diseases at their early stage. Among the various methods available for detection of urea, most are complicated and require time-consuming sample pre-treatment, expensive instrumental set-up and trained persons to operate, specifically for chromatographic methods. The biosensing methods overcome these drawbacks, as these are simple, fast, specific and highly sensitive and can also be applied for detection of urea in vivo. This review presents the principles of various analytical methods for determination of urea with special emphasis on biosensors. The use of various nanostructures and electrochemical microfluidic paper based analytical device (EμPAD) are suggested for further development of urea biosensors.

Fabrication of a Urea Biosensor for Real-Time Dynamic Fluid Measurement

In this study, a portable urea sensor that monitors the urea concentration in flow conditions was fabricated. We propose an electrochemical sensor that continually measures the urea concentration of samples flowing through it at a constant flow rate in real time. For the electrochemical sensing, a porous silk fibroin membrane with immobilized urease was mounted in a polydimethylsiloxane (PDMS) sensor housing. The fabricated urea sensor elicited linear current–concentration characteristics in the clinically significant concentration range (0.1–20 mM) based on peritoneal dialysis. The sensor maintained the linear current–concentration characteristics during operation in flow conditions.

Screening Platform Based on Robolid Microplate for Immobilized Enzyme-Based Assays

A facile, cost-effective, and high-throughput screening method was developed for enzyme-based assays based on Robolid/Microplate (RLMP) platform. The RLMP platform is constructed by immobilizing enzyme on commercial robolids and combining it with a standard 96-well microplate to achieve high-throughput analysis. The initiation and quenching of enzymatic reaction can be performed by simply sandwiching or unsealing the enzyme-immobilized robolids and the sample-containing microplate. This platform enables measurements of multiple target analytes simultaneously based on immobilized enzymatic reactions, with analysis time independent of the number of wells in the microplate. Using urea as the model analyte, we have shown that the RLMP platform exhibits large linear detection range of up to 10 mM, fast analysis time of 30 min/96 samples, as well as good reproducibility and stability. Measurements of urea in human urine and serum samples were performed using the RLMP platform and were compared with the commercial urea test kit. A good correlation was found between the two methods. This study shows that the present RLMP platform has promising prospects for detection of clinical markers and application in disease diagnosis and biochemical analysis.

Two-dimensional ytterbium oxide nanodisks based biosensor for selective detection of urea

Herein, we demonstrate synthesis and application of two-dimensional (2D) rectangular ytterbium oxide (Yb₂O₃) nanodisks via a facile hydrothermal method. The structural, morphological, compositional, crystallinity, and phase properties of as-synthesized nanodisks were carried out using several analytical techniques that showed well defined 2D rectangular nanodisks/sheet like morphologies. The average thickness and edge length of the nanosheet structures were 20 ± 5nm and 600 ± 50nm, respectively. To develop urea biosensor, glassy carbon electrodes (GCE) were modified with Yb₂O₃ nanodisks, followed by urease immobilization and Nafion membrane covering (GCE/Yb₂O₃/Urease/Nafion). The fabricated biosensor showed sensitivity of 124.84μAmM^-1cm^-2, wide linear range of 0.05-19mM, detection limit down to ~ 2μM, and fast response time of ~ 3s. The developed biosensor was also used for the urea detection in water samples through spike-recovery experiments, which illustrates satisfactory recoveries. In addition, the obtained desirable selectivity towards specific interfering species, long-term stability, reproducibility, and repeatability further confirm the potency of as-fabricated urea biosensor.

A Urea Potentiometric Biosensor Based on a Thiophene Copolymer

A potentiometric enzyme biosensor is a convenient detector for quantification of urea concentrations in industrial processes, or for monitoring patients with diabetes, kidney damage or liver malfunction. In this work, poly(3-hexylthiophene-co-3-thiopheneacetic acid) (P(3HT-co-3TAA)) was chemically synthesized, characterized and spin-coated onto conductive indium tin oxide (ITO) glass electrodes. Urease (Urs) was covalently attached to the smooth surface of this copolymer via carbodiimide coupling. The electrochemical behavior and stability of the modified Urs/P(3HT-co-3TAA)/ITO glass electrode were investigated by cyclic voltammetry, and the bound enzyme activity was confirmed by spectrophotometry. Potentiometric response studies indicated that this electrode could determine the concentration of urea in aqueous solutions, with a quasi-Nernstian response up to about 5 mM. No attempt was made to optimize the response speed; full equilibration occurred after 10 min, but the half-time for response was typically <1 min.