Optimizing the removal of fluoride from water using new carbons obtained by modification of nut shell with a calcium solution from egg shell

Comprehensive batch studies on removal of fluoride from aqueous solution by acid and alkali-activated adsorbents prepared from Dal lake weeds: Mechanism, Kinetics and Thermodynamics

An efficient and economical way of eliminating fluoride from water is being investigated by employing the buoyant aquatic plant (Dal weed). Two post-pyrolysis chemical activation alteration techniques were implemented: acidic activation by employing sulfuric acid (H-activation) and alkaline activation using sodium hydroxide (OH-activation). The batch kinetic studies have been carried out considering varying starting fluoride levels such as 2-10 mg/L. The impact of diverse procedural factors, including dosage of Dal weed, starting fluoride level, pH and contact duration was observed to determine their influence on fluoride adsorption kinetics. Based on analyzed exploratory results, removal efficacy of 63% for the OH-activated carbon and 83% for H-activated carbon was achieved at commencing fluoride level of 10 mg/L, adsorbent dosage of 0.8 g, at 25 °C after 120 min. The maximal fluoride uptake capacity for H-activated carbon was observed to be 78.158 mg/g. Kinetic investigations showed that the Freundlich isotherm model provided a satisfactory match with an R2 value of 0.99. The reaction order nature adhered to kinetics resembling pseudo second order. Thermodynamic investigation revealed endothermic sorption, with negative ΔG indicating spontaneous fluoride uptake. In comparison, the positive number for ΔS suggested random behavior at the contact involving the adsorbent and adsorbate. The investigations into the regeneration capabilities of the adsorbent material revealed that even after undergoing for five consecutive cycles of adsorption and regeneration, the adsorbent exhibited an uptake potential of 45%. The presence of competing ions in the solution negatively impacted defluoridation efficacy, with the influence following the order of HCO3-< NO3-< Cl-< SO42-< PO43-.

Management of Solid Waste Containing Fluoride-A Review

Technological and economic development have influenced the amount of post-production waste. Post-industrial waste, generated in the most considerable amount, includes, among others, waste related to the mining, metallurgical, and energy industries. Various non-hazardous or hazardous wastes can be used to produce new construction materials after the “solidification/stabilization” processes. They can be used as admixtures or raw materials. However, the production of construction materials from various non-hazardous or hazardous waste materials is still very limited. In our opinion, special attention should be paid to waste containing fluoride, and the reuse of solid waste containing fluoride is a high priority today. Fluoride is one of the few trace elements that has received much attention due to its harmful effects on the environment and human and animal health. In addition to natural sources, industry, which discharges wastewater containing F− ions into surface waters, also increases fluoride concentration in waters and pollutes the environment. Therefore, developing effective and robust technologies to remove fluoride excess from the aquatic environment is becoming extremely important. This review aims to cover a wide variety of procedures that have been used to remove fluoride from drinking water and industrial wastewater. In addition, the ability to absorb fluoride, among others, by industrial by-products, agricultural waste, and biomass materials were reviewed.

Amino Acid Complexes of Zirconium in a Carbon Composite for the Efficient Removal of Fluoride Ions from Water

Amino acid complexes of zirconia represent an entirely new class of materials that were synthesized and studied for the first time for the decontamination of fluoride ion containing aqueous solutions. Glutamic and aspartic acid complexes of zirconia assembled with thin carbon (stacked graphene oxide) platelets deriving from graphite oxide (GO) were synthesized by a two-step method to prepare adsorbents. The characterization of the complexes was carried out using infrared spectroscopy to determine the functional groups and the types of interaction between the composites and fluoride ions. To reveal the mechanisms and extent of adsorption, two types of batch adsorption measurements were performed: (i) varying equilibrium fluoride ion concentrations to construct adsorption isotherms at pH = 7 in the absence of added electrolytes and (ii) using fixed initial fluoride ion concentrations (10 mg/L) with a variation of either the pH or the concentration of a series of salts that potentially interfere with adsorption. The experimental adsorption isotherms were fitted by three different theoretical isotherm equations, and they are described most appropriately by the two-site Langmuir model for both adsorbents. The adsorption capacities of Zr-glutamic acid-graphite oxide and Zr-aspartic acid-graphite oxide are 105.3 and 101.0 mg/g, respectively. We found that two distinct binding modes are combined in the Zr-amino acid complexes: at low solution concentrations, F⁻ ions are preferentially adsorbed by coordinating to the surface Zr species up to a capacity of ca. 10 mg/g. At higher concentrations, however, large amounts of fluoride ions may undergo anion exchange processes and physisorption may occur on the positively charged ammonium moieties of the interfacially bound amino acid molecules. The high adsorption capacity and affinity of the studied dicarboxylate-type amino acids demonstrate that amino acid complexes of zirconia are highly variable materials for the safe and efficient capture of strong Lewis base-type ions such as fluoride.

Mesoporous aluminum impregnated rubber seed shell waste enriched with calcium as adsorbent material for the removal of microbial DNA in aqueous solution

Water contamination by pathogens and diseases induced by these pathogens is a major water quality issue all over the world. Poor public health has been linked to tap water polluted with DNA harboring antibiotic resistance genes sequence. According to HSAB concept, surface modification of rubber seed shell waste with alumina (AIRSS) as novel agro-waste adsorbent creates more active surface constituents for DNA adsorption. The proximate, ultimate and EDAX analysis provides the percentage levels of ash concentration, volatile, moisture and fixed carbon content, elemental composition present in the adsorbent. The structural features of AIRSS were determined using FT-IR, SEM and XRD. In order to improve reaction conditions, the effect of pH, temperature, adsorbent amount, and reaction time is also examined. The highest percent of DNA removal (92.5%) was achieved at the optimum conditions: 2 g/L at pH 4, contact time 120 minutes as compared to the conventional methods. The DNA adsorbs onto the surface of AIRSS through physical (vander Waals force) and chemical interactions, as demonstrated by kinetics and spectroscopic analyses. Changes in enthalpy (H), free energy (G), and entropy (S) indicate that adsorption is a spontaneous and exothermic process, according to thermodynamic parameters. The results of the experiments showed that the prepared AIRSP adsorbent could be used to remove DNA from water. The efficacy of AIRSS for the removal of DNA has decreased after nine months of storage and use. Low pH and the presence of AIRSS improved DNA-AIRSS adsorption, according to our findings.

Removal of fluoride in aqueous medium under the optimum conditions through intracellular accumulation in Bacillus flexus (PN4)

The removal of fluoride is essential for water contaminated with fluoride before being utilized since the unsafe concentration of fluoride with respect to the permissible limits. In the present study, there are 61 bacterial strains belonging to fluoride tolerance were isolated from the contaminated soil of Dharmapuri District, Tamil Nadu, India and they were evaluated for different characterization. Among the strains isolated, the strain PN4 showed a high tolerance to fluoride ranging from 500 to 2500 ppm under different stress conditions. The strain PN4 was selected as a possible organism for the degradation and removal of fluoride in an aqueous medium. Based on the morphology, biochemical characteristics and the 16S rRNA sequencing, the bacterium PN4 was identified as Bacillus flexus. In batch mode studies, the glucose was showed the maximum removal of fluoride (86%) followed by beef extract (82%) and a significant level of defluoridation was observed at pH 7.0 and the temperature at 35°C. In the antibiotic-resistance pattern, the strain Bacillus flexus PN4 was shown sensitive to three different antibiotics. Intracellular accumulation of fluoride by the bacterial cell was characterized by SEM- EDAX, TEM and FTIR analysis.

Bone-derived biochar and magnetic biochar for effective removal of fluoride in groundwater: Effects of synthesis method and coexisting chromium

The presence of fluoride in groundwater in excess of 1.5 mg L^-1 is a major environmental health concern, and biochar is a promising low-cost adsorbent for the treatment of such water. In the present study, pristine and magnetic biochars were synthesized by peanut hull and bovine bone for the adsorption of fluoride. The biochars were systematically characterized by SEM-EDS, BET, XRD, VSM, FT-IR, and XPS. The experiment results showed that the magnetic biochar prepared by soaking biomass in FeCl₃ solution and then pyrolyzing ("prepyrolysis") had a higher adsorption capacity than that prepared by mixing pristine biochar with Fe²⁺ /Fe³⁺ solution and then treating with NaOH ("postpyrolysis"). The bone-derived biochar and magnetic biochar exhibited high adsorption capacity of fluoride (>5 mg g^-1 ) due to the presence of hydroxyapatite (HAP) and γ-Fe₂ O₃ . The 0.1 M NaOH solution could be optimal desorption agent, and the adsorption-desorption experiments indicated the bone biochars maintained the reasonable adsorption capacity after several cycles. Moreover, the coexisting Cr(VI) and fluoride could be removed simultaneously by bone-derived biochars. It is suggested that bovine bone-derived pristine and magnetic biochars can be used as preferential adsorbents for fluoride removal from contaminated groundwater. PRACTITIONER POINTS: Bone-derived pristine and magnetic biochars exhibit high adsorption capacity for fluoride in weakly alkaline solution. The presence of hydroxyapatite and γ-Fe₂ O₃ in bone-derived biochars plays an important role for fluoride adsorption. Magnetic biochars prepared by soaking biomass in FeCl₃ solution and then pyrolyzing ("prepyrolysis") perform better. The coexisting Cr(VI) and fluoride can be simultaneously removed in groundwater by bone biochars.

Groundwater fluoride removal using modified mesoporous dung carbon and the impact of hydrogen-carbonate in borehole samples

There have been many research reports pertained to the interference of co - ions including hydrogen carbonate against the removal of fluoride from water. In this context, the present research explores the fluoride removal efficiency of ammonium carbonate modified dung derived carbon (DDC500) in the absence and presence of hydrogen carbonate using synthetically made fluoride solutions and groundwater samples. The adsorbent DDC500 was found to achieve the highest removal of 80% of fluoride at pH 6.95 than the washed carbon (DDC500W) and dung ash (DA) of 48% and 23% respectively. In DDC500, the carbon base in concert with inorganic residues actively functioned in the fluoride removal process and chosen for synthetic fluoride solutions (2-5 mg L^-1) and 16 groundwater samples (2.1-3.6 mg L^-1) from 10 locations of Usilampatti Taluk in Madurai District, South India. After the removal of hydrogen carbonate in groundwater, the percentage of samples was increased in accordance with the safe limits of World Health Organization (WHO) and Bureau of Indian Standard (BIS). Langmuir isotherm model (R² = 0.9379) was in concordance with the adsorption of fluoride from groundwater free from hydrogen carbonate. The dynamics of other groundwater quality parameters at conditions and the independency between F-/HCO₃- ratio and DE were illustrated by scatter plots. Characterization studies for the dried dung (CD110), derived carbons (DDC500 and DDC500W) and ashes (CD110A, DDC500A and DDC500WA) using FE-SEM, XRD, FTIR, Raman and TGA - EGA were done to understand the nature and behavior of materials.

A review of emerging adsorbents and current demand for defluoridation of water: Bright future in water sustainability

Fluoride contamination of groundwater is a serious problem in several countries of the world because of the intake of excessive fluoride caused by the drinking of the contaminated groundwater. Geological and anthropogenic factors are responsible for the contamination of groundwater with fluoride. Excess amounts of fluoride in potable water may cause irreversible demineralisation of bone and tooth tissues, a condition called fluorosis, and long-term damage to the brain, liver, thyroid, and kidney. There has long been a need for fluoride removal from potable water to make it safe for human use. From among several defluoridation technologies, adsorption is the technology most commonly used due to its cost-effectiveness, ease of operation, and simple physical process. In this paper, the adsorption capacities and fluoride removal efficiencies of different types of adsorbents are compiled from relevant published data available in the literature and represented graphically. The most promising adsorbents tested so far from each category of adsorbents are also highlighted. There is still a need to discover the actual feasibility of usage of adsorbents in the field on a commercial scale and to define the reusability of adsorbents to reduce cost and the waste produced from the adsorption process. The present paper reviews the currently available methods and emerging approaches for defluoridation of water.

Cow bones char as a green sorbent for fluorides removal from aqueous solutions: batch and fixed-bed studies

Cow bone char was investigated as sorbent for the defluoridation of aqueous solutions. The cow bone char was characterized in terms of its morphology, chemical composition, and functional groups present on the bone char surface using different analytical techniques: SEM, EDS, N₂-BET method, and FTIR. Batch equilibrium studies were performed for the bone chars prepared using different procedures. The highest sorption capacities for fluoride were obtained for the acid washed (q = 6.2 ± 0.5 mg/g) and Al-doped (q = 6.4 ± 0.3 mg/g) bone chars. Langmuir and Freundlich models fitted well the equilibrium sorption data. Fluoride removal rate in batch system is fast in the first 5 h, decreasing after this time until achieving equilibrium due to pore diffusion. The presence of carbonate and bicarbonate ions in the aqueous solution contributes to a decrease of the fluoride sorption capacity of the bone char by 79 and 31 %, respectively. Regeneration of the F-loaded bone char using 0.5 M NaOH solution leads to a sorption capacity for fluoride of 3.1 mg/g in the second loading cycle. Fluoride breakthrough curve obtained in a fixed-bed column presents an asymmetrical S-shaped form, with a slow approach of C/C ₀ → 1.0 due to pore diffusion phenomena. Considering the guideline value for drinking water of 1.5 mg F^-/L, as recommended by World Health Organization, the service cycle for fluoride removal was of 71.0 h ([F^-]_feed ∼ 9 mg/L; flow rate = 1 mL/min; m _sorbent = 12.6 g). A mass transfer model considering the pore diffusion was able to satisfactorily describe the experimental data obtained in batch and continuous systems.

Removal of fluoride from polluted waters using active carbon derived from barks of Vitex negundo plant

Background

Deleterious effects of fluoride contamination in ground waters on the health of human beings are well known and intensive research on developing de-fluoridation methods is globally pursued. Of the various methodologies, increasing interest is being envisaged in using the adsorption methods based on active carbons derived from plant material. In the present investigation, Nitric acid activated carbon derived from barks of Vitex negundo plant (NVNC) is probed for its de-fluoridation abilities.

Methods

The activated carbon is characterized adopting various physicochemical methods and surface morphological studies are carried out using FT-IR and SEM-EDX techniques. The effect of various parameters such as pH, sorbent dosage, agitation time, initial concentration of fluoride, temperature, particle size and presence of foreign ions on the extraction of the fluoride is studied adopting Batch methods.The adsorption process is analyzed with Freundlich, Langmuir, Temkin and Dubinin-Radushkevich (D-R) isotherms and kinetics of adsorption is studied using pseudo first-order, pseudo second-order, Weber and Morris intraparticle diffusion, Bangham’s pore diffusion and Elovich equations. The methodology developed is applied to real ground water samples.

Results

De-fluoridation is maximum at the pH: 7.0, adsorbent dosage: 4.0g/lit; equilibrium time: 50 min, Particle size: 45μ and temperature: 30 ± 1°C. The correlation coefficient values for the adsorption isotherms: Freundlich, Langmuir, Temkin and Dubinin-Radushkevich are 0.929, 0.998, 0.980 and 0.946 respectively and for kinetic models: pseudo-first-order, pseudo-second-order, Weber and Morris intraparticle diffusion, Bangham’s pore diffusion and Elovich equations are 0.989, 0.994, 0.874, 0.902 and 0.912 respectively. The Temkin heat of sorption, B, and the Dubinin-Radushkevich mean free energy, E, for the activated carbon adsorbent are 0.196 J/mol and 7.07 kJ/mol respectively.

Conclusions

Nitric acid activated carbon derived from barks of Vitex negundo (NVNC) plant is found to be an effective adsorbent for the de-fluoridation of waters. The adsorption process is satisfactorily fitted with Langmuir adsorption isotherm with good correlation coefficient value and it indicates monolayer adsorption. The adsorption kinetics is found to follow pseudo-second-order kinetics. The Dubinin-Radushkevich mean free energy and Temkin heat of sorption confirm the physisorption nature as these are lower than 20kJ/mol. The procedure developed is remarkably successful in de-fluoridation of real ground water samples.

Iron–silver oxide nanoadsorbent synthesized by co-precipitation process for fluoride removal from aqueous solution and its adsorption mechanism

Fe–Ag magnetic binary oxide nanoparticles (Fe–Ag MBON) are prepared with co-precipitation of ferric and ferrous chloride solutions, and used for the adsorption of fluoride from aqueous solution.

Kinetic and equilibrium modeling for removal of nitrate from aqueous solutions and drinking water by a potential adsorbent, hydrous bismuth oxide

The kinetic, equilibrium modeling and adsorption characteristics of hydrous bismuth oxides (HBOs) have been investigated for the removal of nitrate from aqueous solutions.

A Review on Adsorption of Fluoride from Aqueous Solution

Fluoride is one of the anionic contaminants which is found in excess in surface or groundwater because of geochemical reactions or anthropogenic activities such as the disposal of industrial wastewaters. Among various methods used for defluoridation of water such as coagulation, precipitation, membrane processes, electrolytic treatment, ion-exchange, the adsorption process is widely used. It offers satisfactory results and seems to be a more attractive method for the removal of fluoride in terms of cost, simplicity of design and operation. Various conventional and non-conventional adsorbents have been assessed for the removal of fluoride from water. In this review, a list of various adsorbents (oxides and hydroxides, biosorbents, geomaterials, carbonaceous materials and industrial products and by-products) and its modifications from literature are surveyed and their adsorption capacities under various conditions are compared. The effect of other impurities on fluoride removal has also been discussed. This survey showed that various adsorbents, especially binary and trimetal oxides and hydroxides, have good potential for the fluoride removal from aquatic environments.

Zirconium-carbon hybrid sorbent for removal of fluoride from water: oxalic acid mediated Zr(IV) assembly and adsorption mechanism

When activated carbon (AC) is modified with zirconium(IV) by impregnation or precipitation, the fluoride adsorption capacity is typically improved. There is significant potential to improve these hybrid sorbents by controlling the impregnation conditions, which determine the assembly and dispersion of the Zr phases on carbon surfaces. Here, commercial activated carbon was modified with Zr(IV) together with oxalic acid (OA) used to maximize the zirconium dispersion and enhance fluoride adsorption. Adsorption experiments were carried out at pH 7 and 25 °C with a fluoride concentration of 40 mg L(-1). The OA/Zr ratio was varied to determine the optimal conditions for subsequent fluoride adsorption. The data was analyzed using the Langmuir and Freundlich isotherm models. FTIR, XPS, and the surface charge distribution were performed to elucidate the adsorption mechanism. Potentiometric titrations showed that the modified activated carbon (ZrOx-AC) possesses positive charge at pH lower than 7, and FTIR analysis demonstrated that zirconium ions interact mainly with carboxylic groups on the activated carbon surfaces. Moreover, XPS analysis demonstrated that Zr(IV) interacts with oxalate ions, and the fluoride adsorption mechanism is likely to involve -OH(-) exchange from zirconyl oxalate complexes.

Determining optimal conditions to produce activated carbon from barley husks using single or dual optimization

When producing activated carbons from agricultural by-products, certain properties, such as yield and specific surface area, are very important for obtaining an economical and promising adsorbent material. Nevertheless, many researchers have not simultaneously optimized these properties and have obtained different optimal conditions for the production of activated carbon that either increases specific surface area but decreases yield or vice versa. In this research, the production of activated carbon from barley husks (BH) by chemical activation with zinc chloride was optimized by using a 2(3) factorial design with replicates at the central point, followed by a central composite design with two responses (the yield and iodine number) and three factors (the activation temperature, activation time, and impregnation ratio). Both responses were simultaneously optimized by using the desirability functions approach to determine the optimal conditions of this process. The findings reveal that after the simultaneous dual optimization, the maximal response values were obtained at an activation temperature of 436 °C, an activation time of 20 min, and an impregnation ratio of 1.1 g ZnCl₂/g BH, although the results after the single optimization of each response were quite different. At these conditions, the predicted values for the iodine number and yield were 829.58 ± 78.30 mg/g and 46.82 ± 2.64%, respectively, whereas experimental tests produced values of 901.86 mg/g and 48.48%, respectively. Moreover, activated carbons from BH obtained at the optimal conditions primarily developed a porous structure (mesopores > 71% and micropores > 28%), achieving a high surface area (811.44 m(2)/g) that is similar to commercial activated carbons and lignocellulosic-based activated carbons. These results imply that the pore width and surface area are large enough to allow the diffusion and adsorption of pollutants inside the adsorbent particles. In summary, two responses were optimized to determine the optimal conditions for the production of activated carbons because it is possible to increase both the specific surface area and yield.

A critical study on efficiency of different materials for fluoride removal from aqueous media

Fluoride is a persistent and non-biodegradable pollutant that accumulates in soil, plants, wildlife and in human beings. Therefore, knowledge of its removal, using best technique with optimum efficiency is needed. The present survey highlights on efficacy of different materials for the removal of fluoride from water. The most important results of extensive studies on various key factors (pH, agitation time, initial fluoride concentration, temperature, particle size, surface area, presence and nature of counter ions and solvent dose) fluctuate fluoride removal capacity of materials are reviewed.

Alumina supported carbon composite material with exceptionally high defluoridation property from eggshell waste

A new alumina supported carbon composite material called "Eggshell Composite" (EC) was synthesized from eggshell waste as calcium source for selective fluoride adsorption from water. The effect of various synthesis parameters like eggshell (ES): Eggshell membrane (ESM) ratio, aluminium loading, mixing time and calcinations temperature to optimize the synthesis conditions for selective fluoride removal has been studied. It was observed that the synthesis parameters have significant influence on development of EC and in turn on fluoride removal capacity. EC synthesized was characterized for elemental composition, morphology, functionality and textural properties. Results showed that EC obtained from eggshell modified with alumina precursor is more selective and efficient for fluoride removal. Langmuir and Freundlich isotherm were used to obtain ultimate fluoride removal capacity. The calcium and alumina species in EC shows synergistic effect in fluoride adsorption process. Fluoride sorption studies were carried out in synthetic, groundwater and wastewater. EC proved to be a potential, indigenous and economic adsorbent for fluoride removal.