Ultrasound assisted ammonia pretreatment of sugarcane bagasse for fermentable sugar production

Synergistic effect of ultrasound and citric acid treatment on functional, structural and storage properties of hog plum (Spondias mombin L) bagasse

A novel approach in promoting the valorisation of fruit waste as potential bio-ingredients in food applications is gaining research attention in recent times. In the present study, hog plum bagasse (HPB) treated with citric acid alone (0.12 dm3, 99.0% purity) and in synergistic treatment with ultrasound (40 KHz, 400 W, 0.348 W/cm3, 60 min, 80 °C). Treated samples were evaluated for proximate and lignocellulose composition, functional, bioactive, structural, morphology and microbial properties, while the untreated samples served as control. HPB showed varied proximate values with treatment effect. Notably, a significant reduction (42.06%) was observed in fibre content. A similar reduction was observed in the hemicellulose and lignin fraction but improved the yield of the cellulose component. Furthermore, treatment increased bulk density (0.120-0.131 g/cm3), water absorption capacity (5.60-6.35 g/g), swelling power (8.85-9.94 g/g) and solubility index (1.01-2.32%) but reduced oil absorption capacity (7.50-4.15 g/g). All colour parameters were reduced with treatment, while the total phenolic compound and antioxidant capacity of treated bagasse improved by 24.70% and 45.37%. Fourier transform infra-red spectroscopy alterations were observed in the absorption spectra with treatment, while scanning electron microscopestructure in treated samples showed cavity formation. Also, the microbial population was reduced to a non-detectable level after treatment. Ultrasound-assisted treatment of HPB holds a valorisation potential for its food application by relevant agro-based industries.

Sustainable valorization of sugarcane residues: Efficient deconstruction strategies for fuels and chemicals production

The global climate crisis and the ongoing increase in fossil-based fuels have led to an alternative solution of using biomass for fuel production. Sugarcane bagasse (SCB) is an agricultural residue with a global production of more than 100 million metric tons and it has various applications in a biorefinery concept. This review brings forth the composition, life cycle assessment, and various pretreatments for the deconstruction techniques of SCB for the production of valuable products. The ongoing research in the production of biofuels, biogas, and electricity utilizing the bagasse was elucidated. SCB is used in the production of carboxymethyl cellulose, pigment, lactic acid, levulinic acid, and xylooligosaccharides and it has prospective in meeting the demand for global energy and environmental sustainability.

Intensification of dilute acid hydrolysis of spent tea powder using ultrasound for enhanced production of reducing sugars

Spent tea (ST) powder is one of the potential sustainable sources available abundantly and can be utilized to produce reducing sugars required for production of platform chemicals. The current study aims at intensifying the reducing sugars production based on ultrasound assisted dilute acid hydrolysis (UADAH). The effects of reaction time, solid liquid ratio, acid concentration and temperature on the yield of reducing sugars were investigated initially for UADAH process based on ultrasonic (US) horn. The highest yield of 24.75 g/L for the reducing sugars was obtained at solid liquid ratio of 1:8, acid concentration of 1% w/v and temperature of 60 °C within 120 min. Use of oxidants like hydrogen peroxide (H₂O₂) and Fenton's reagent to further intensify the production has also been studied. Use of H₂O₂ at optimum loading of 0.75 g/L resulted in reducing sugars yield of 26.2 g/L within 75 min while using same H₂O₂ loading with FeSO₄ at loading of 0.75 g/L along with UADAH reduced the reaction time to 60 min for almost similar yield. Large scale studies performed using US flow cell revealed that yield of reducing sugars as 22.4 g/L is obtained in 120 min in the case of only UADAH, while in the case of UADAH along with H₂O₂ and Fenton's reagent, similar yield of reducing sugars was obtained in only 90 and 60 min respectively. UADAH in combination with oxidants has been demonstrated as an effective and intensified approach to produce reducing sugars from spent tea powder available as sustainable source.

Ultrasound combined with dilute acid pretreatment of grass for improvement of fermentative hydrogen production

In this study, the dilute acid pretreatment combined with ultrasound was applied to improve fermentative hydrogen production from grass. The experimental results indicated that SCOD and soluble carbohydrate contents of grass was improved by 98.6% and 236.9% after the combined treatment, respectively. Surface morphology (SEM and AFM) and crystallinity analysis revealed that the combined pretreatment process could effectively destroyed the biomass structure and increased their surface area. Owing to the increased soluble organics proportion and better enzymatic accessibility of residual solids, the hydrogen yield reached 42.2 mL/g-dry grass after the combined treatment, which was 311.7%, 190.0% and 35.0% higher in comparison with the control, individual ultrasound and acid pretreated groups, respectively. Meanwhile, the combined treatment also increased the substrate utilization efficiency and induced a more efficient fermentation pathway. Bacterial community analysis revealed that more enrichment of Clostridium and less enrichment of Enterococcus contributed to the improved hydrogen production.

Physicochemical characteristics and pyrolysis performance of corn stalk torrefied in aqueous ammonia by microwave heating

The physicochemical characteristics and pyrolysis performance of corn stalk (CS) torrefied in water and aqueous ammonia by microwave heating were investigated. Physicochemical characterization revealed that both microwave water torrefied CS (MCS) and microwave ammonia torrefied CS (MACS) showed low hemicellulose content, disrupted macrostructure, improved porous properties, and low ash content. MACS exhibited a significantly lower crystallinity degree of 44.34% than CS (79.55%) and MCS (89.50%). MACS also showed increased methyl/methylene groups intensity, and complete acetyl groups disrupture. Pyrolysis coupled with gas chromatography/mass spectrometry (Py-GC/MS) revealed that compared with CS and MCS, MACS exhibited higher peak areas for ketones, aldehydes, furans and esters, and significantly lower peak areas for acids and phenols. A possible mechanism was proposed for the effects of wet torrefaction with aqueous ammonia on changes in physicochemical structure and pyrolysis behavior of corn stalk.

Emerging technologies for the pretreatment of lignocellulosic biomass

Pretreatment of lignocellulosic biomass to overcome its intrinsic recalcitrant nature prior to the production of valuable chemicals has been studied for nearly 200 years. Research has targeted eco-friendly, economical and time-effective solutions, together with a simplified large-scale operational approach. Commonly used pretreatment methods, such as chemical, physico-chemical and biological techniques are still insufficient to meet optimal industrial production requirements in a sustainable way. Recently, advances in applied chemistry approaches conducted under extreme and non-classical conditions has led to possible commercial solutions in the marketplace (e.g. High hydrostatic pressure, High pressure homogenizer, Microwave, Ultrasound technologies). These new industrial technologies are promising candidates as sustainable green pretreatment solutions for lignocellulosic biomass utilization in a large scale biorefinery. This article reviews the application of selected emerging technologies such as ionizing and non-ionizing radiation, pulsed electrical field, ultrasound and high pressure as promising technologies in the valorization of lignocellulosic biomass.

Comparison of ultrasound-assisted ionic liquid and alkaline pretreatment of Eucalyptus for enhancing enzymatic saccharification

Two ultrasound-assisted pretreatment technologies, ultrasound-assisted alkaline and ultrasound-assisted aqueous ionic liquid tetrabutylammonium hydroxide ([TBA][OH]), are compared systematically in regard to enzymatic saccharification. Pretreated Eucalyptus samples were characterized by powder X-ray diffraction, ¹³C cross polarization/magic-angle spinning solid state NMR spectroscopy, Fourier transform infrared spectroscopy, Scanning electron microscope (SEM) and chemistry composition analysis. These results not only explain the enzymatic saccharification difference between samples from the microstructure level, but also provide helpful information for relevant pretreatment research. Ultrasound-assisted [TBA][OH] pretreatment acquired a significant enhancement in the initial enzymatic rate of cellulose (79.39 mg/g/h), and a reducing sugar yield of 426.6 mg/g at 48 h. The pretreatment combining inexpensive aqueous ionic liquid and ultrasound may provide a promising strategy in the field of bio-refinery because of its unique advantages.

Enhanced enzymatic hydrolysis of corncob by ultrasound-assisted soaking in aqueous ammonia pretreatment

Ultrasound-assisted soaking in aqueous ammonia (USAA) pretreatment with 15 wt% aqueous ammonia under low temperature (~ 60 °C) and short-time (< 12 min) low-frequency (20 kHz, 60-650 W) ultrasound has been investigated for enhancement of enzymatic hydrolysis of corncob. Operational parameters of energy density (2.93-17.07 W/mL) and sonication time (0.34-11.66 min) that affect cellulose recovery, delignification, and sugar recovery yield were studied and optimized. The maximum cellulose recovery, delignification and sugar recovery yield determined at the optimum conditions (energy density 10 W/mL, sonication time 11.66 min) were 83.8, 84.7, and 77.6%, respectively. The corncob pretreated using USAA has a lower hemicellulose content (28.9% vs 31.8%), a slightly lower crystallinity index value (42.7% vs 43.7%), and a larger surface cavity diameter (> 36 μm vs < 20 μm) than that pretreated using soaking in aqueous ammonia (SAA) pretreatment. The USAA pretreatment was proved to be a reliable and effective method for corncob pretreatment.

Ultrasound-assisted biological conversion of biomass and waste materials to biofuels: A review

Ultrasound irradiation has been gaining increasing interests over the years to assist biological conversion of lignocellulosic biomass and waste materials to biofuels. As such, this study reviewed the different effects of sonication on pre-treatment of lignocellulosic biomass and waste materials prior to biofuel production. The mechanisms of ultrasound irradiation as a pre-treatment technique were initially described and the impacts of sonication on disruption of lignocellulosic materials, alteration of the crystalline lattice structure of cellulose molecules, solubilisation of organic matter, reducing sugar production and enzymatic hydrolysis were then reviewed. Subsequently, the influences of ultrasound irradiation on bio-methane, bio-hydrogen and bio-ethanol production were re-evaluated, with most studies reporting enhanced biofuel production from anaerobic digestion or fermentation processes. Nonetheless, despite its positive impacts on biofuel production, sonication was found to be energetically inefficient based on the lab-scale studies reviewed. To conclude, this study reviewed some of the challenges of ultrasound irradiation for enhanced biofuel production while outlining some areas for further research.

Enhanced biohydrogen and subsequent biomethane production from sugarcane bagasse using nano-titanium dioxide pretreatment

Nano-titanium dioxide (nanoTiO2) under ultraviolet irradiation (UV) followed by dilute sulfuric acid hydrolysis of sugarcane bagasse was used to enhance the production of biohydrogen and biomethane in a consecutive dark fermentation and anaerobic digestion. Different concentrations of 0.001, 0.01, 0.1 and 1g nanoTiO2/L under different UV times of 30, 60, 90 and 120min were used. Sulfuric acid (2%v/v) at 121°C was used for 15, 30 and 60min to hydrolyze the pretreated bagasse. For acidic hydrolysis times of 15, 30 and 60min, the highest total free sugar values were enhanced by 260%, 107%, and 189%, respectively, compared to samples without nanoTiO2 pretreatment. The highest hydrogen production samples for the same acidic hydrolysis times showed 88%, 127%, and 25% enhancement. The maximum hydrogen production of 101.5ml/g VS (volatile solids) was obtained at 1g nanoTiO2/L and 120min UV irradiation followed by 30min acid hydrolysis.

Mechanistic study on ultrasound assisted pretreatment of sugarcane bagasse using metal salt with hydrogen peroxide for bioethanol production

This study presents the ultrasound assisted pretreatment of sugarcane bagasse (SCB) using metal salt with hydrogen peroxide for bioethanol production. Among the different metal salts used, maximum holocellulose recovery and delignification were achieved with ultrasound assisted titanium dioxide (TiO2) pretreatment (UATP) system. At optimum conditions (1% H2O2, 4 g SCB dosage, 60 min sonication time, 2:100 M ratio of metal salt and H2O2, 75°C, 50% ultrasound amplitude and 70% ultrasound duty cycle), 94.98 ± 1.11% holocellulose recovery and 78.72 ± 0.86% delignification were observed. The pretreated SCB was subjected to dilute acid hydrolysis using 0.25% H2SO4 and maximum xylose, glucose and arabinose concentration obtained were 10.94 ± 0.35 g/L, 14.86 ± 0.12 g/L and 2.52 ± 0.27 g/L, respectively. The inhibitors production was found to be very less (0.93 ± 0.11 g/L furfural and 0.76 ± 0.62 g/L acetic acid) and the maximum theoretical yield of glucose and hemicellulose conversion attained were 85.8% and 77%, respectively. The fermentation was carried out using Saccharomyces cerevisiae and at the end of 72 h, 0.468 g bioethanol/g holocellulose was achieved. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis of pretreated SCB was made and its morphology was studied using scanning electron microscopy (SEM). The compounds formed during the pretreatment were identified using gas chromatography-mass spectrometry (GC-MS) analysis.

Prospects for Irradiation in Cellulosic Ethanol Production

Second generation bioethanol production technology relies on lignocellulosic biomass composed of hemicelluloses, celluloses, and lignin components. Cellulose and hemicellulose are sources of fermentable sugars. But the structural characteristics of lignocelluloses pose hindrance to the conversion of these sugar polysaccharides into ethanol. The process of ethanol production, therefore, involves an expensive and energy intensive step of pretreatment, which reduces the recalcitrance of lignocellulose and makes feedstock more susceptible to saccharification. Various physical, chemical, biological, or combined methods are employed to pretreat lignocelluloses. Irradiation is one of the common and promising physical methods of pretreatment, which involves ultrasonic waves, microwaves, γ-rays, and electron beam. Irradiation is also known to enhance the effect of saccharification. This review explains the role of different radiations in the production of cellulosic ethanol.