A novel bioflocculant produced by a salt-tolerant, alkaliphilic and biofilm-forming strain Bacillus agaradhaerens C9 and its application in harvesting Chlorella minutissima UTEX2341

Synthesis of polysaccharides by microalgae Chlorella sp

Microalgae are known to be the richest natural source of polysaccharides. The study aimed to evaluate the ability of microalgae from the Chlorella sp. genus to synthesize polysaccharides. Brody & Emerson max medium proved to be the most effective; the average cell content in the culture fluid at the beginning and at the end of cultivation for IPPAS Chlorella pyrenoidosa Chick was 1.23 ± 0.03 g/L and 1.71 ± 0.20 g/L, respectively. With a high average dry weight of IPPAS Chlorella pyrenoidosa Chick (4.45 ± 0.10 g/L), it produced the least amount of neutral sugars (0.75 ± 0.02 g/L) and uronic acids (0.14 ± 0.01 mg/L). The microalga IPPAS Chlorella vulgaris with the lowest average dry weight (1.18 ± 0.03 g/L) produced 0.80 ± 0.02 g/L of neutral sugars and 0.17 ± 0.01 mg/L of uronic acids. Microalgal polysaccharides have the potential to be used as a source for biologically active food additives, as they contain various types of polysaccharides that can be beneficial to human health.

Efficacy of exopolysaccharide in dye-laden wastewater treatment: A comprehensive review

The discharge of dye-laden wastewater into the water streams causes severe water and soil pollution, which poses a global threat to aquatic ecosystems and humans. A diverse array of microorganisms such as bacteria, fungi, and algae produce exopolysaccharides (EPS) of different compositions and exhibit great bioflocculation potency to sustainably eradicate dyes from water bodies. Nanomodified chemical composites of EPS enable their recyclability during dye-laden wastewater treatment. Nevertheless, the selection of potent EPS-producing strains and physiological parameters of microbial growth and the remediation process could influence the removal efficiency of EPS. This review will intrinsically discuss the fundamental importance of EPS from diverse microbial origins and their nanomodified chemical composites, the mechanisms in EPS-mediated bioremediation of dyes, and the parametric influences on EPS-mediated dye removal through sorption/bioflocculation. This review will pave the way for designing and adopting futuristic green and sustainable EPS-based bioremediation strategies for dye-laden wastewater in situ and ex situ.

Perspectives on cultivation and harvesting technologies of microalgae, towards environmental sustainability and life cycle analysis

The development of algae is seen as a potential and ecologically sound approach to address the increasing demands in multiple sectors. However, successful implementation of processes is highly dependent on effective growing and harvesting methods. The present study provides a complete examination of contemporary techniques employed in the production and harvesting of algae, with a particular emphasis on their sustainability. The review begins by examining several culture strategies, encompassing open ponds, closed photobioreactors, and raceway ponds. The analysis of each method is conducted in a systematic manner, with a particular focus on highlighting their advantages, limitations, and potential for expansion. This approach ensures that the conversation is in line with the objectives of sustainability. Moreover, this study explores essential elements of algae harvesting, including the processes of cell separation, dewatering, and biomass extraction. Traditional methods such as centrifugation, filtration, and sedimentation are examined in conjunction with novel, environmentally concerned strategies including flocculation, electro-coagulation, and membrane filtration. It evaluates the impacts on the environment that are caused by the cultivation process, including the usage of water and land, the use of energy, the production of carbon dioxide, and the runoff of nutrients. Furthermore, this study presents a thorough examination of the current body of research pertaining to Life Cycle Analysis (LCA) studies, presenting a perspective that emphasizes sustainability in the context of algae harvesting systems. In conclusion, the analysis ends up with an examination ahead at potential areas for future study in the cultivation and harvesting of algae. This review is an essential guide for scientists, policymakers, and industry experts associated with the advancement and implementation of algae-based technologies.

Production of bioflocculant from Klebsiella pneumoniae: evaluation of fish waste extract as substrate and flocculation performance

The bioflocculant producing bacterial strain - UKD24 was isolated from the domestic sewage treatment plant. The isolated strain was identified as Klebsiella pneumoniae by using 16S rRNA gene sequencing. The K. pneumoniae UKD24 showed remarkable flocculation rates when grown with the carbon sources namely glucose, sucrose and lactose, and many commercial nitrogen sources. Furthermore, the fish waste extract (FE) was used to enhance the productivity of the bioflocculant as a nitrogen supplement and it showed a significant level of flocculation rate similar to the commercial nitrogen sources. The Box-Behnken experiments were designed to predict the optimal conditions for bioflocculant production and it suggested that glucose - 3.247 g L-1, FE - 0.5 g L-1 and inoculum size - 1% are the suitable levels for bioflocculant production. The FTIR analysis of the bioflocculant showed the functional groups related to the polysaccharides and the EEM analysis showed the fluorescence components related to the proteins and humic acids. The biochemical composition of the bioflocculant was identified as polysaccharides (24.36 ± 1.5%) and protein (12.15 ± 0.2%). The tested optimum conditions of the bioflocculant to induce flocculation were tested in the kaolin wastewater and it showed that the optimum dosage of the flocculant was 5 mg L-1 and the pH range was broad as 5-10. The cation dependency tests revealed that the monovalent and divalent cations are highly suitable for flocculation while the trivalent cations showed moderate flocculation. The Cr(VI) removal efficiency of the bioflocculant showed that ∼35% of heavy metal is trapped into flocks during the flocculation.

Functional identification of two novel carbohydrate-binding modules of glucuronoxylanase CrXyl30 and their contribution to the lignocellulose saccharification

BACKGROUND

Glycoside hydrolase (GH) family 30 xylanases are a distinct group of xylanases, most of which have a highly specific catalytic activity for glucuronoxylan. Since GH30 xylanases do not normally carry carbohydrate-binding modules (CBMs), our knowledge of the function of their CBMs is lacking.

RESULTS

In this work, the CBM functions of CrXyl30 were investigated. CrXyl30 was a GH30 glucuronoxylanase containing tandem CBM13 (CrCBM13) and CBM2 (CrCBM2) at its C terminus, which was identified in a lignocellulolytic bacterial consortium previously. Both CBMs could bind insoluble and soluble xylan, with CrCBM13 having binding specificity for the xylan with L-arabinosyl substitutions, whereas CrCBM2 targeted L-arabinosyl side chains themselves. Such binding abilities of these two CBMs were completely different from other CBMs in their respective families. Phylogenetic analysis also suggested that both CrCBM13 and CrCBM2 belong to novel branches. Inspection of the simulated structure of CrCBM13 identified a pocket that just accommodates the side chain of 3(2)-alpha-L-arabinofuranosyl-xylotriose, which forms hydrogen bonds with three of the five amino acid residues involved in ligand interaction. The truncation of either CrCBM13 or CrCBM2 did not alter the substrate specificity and optimal reaction conditions of CrXyl30, whereas truncation of CrCBM2 decreased the k_cat/K_m value by 83% (± 0%). Moreover, the absence of CrCBM2 and CrCBM13 resulted in a 5% (± 1%) and a 7% (± 0%) decrease, respectively, in the amount of reducing sugar released by the synergistic hydrolysis of delignified corncob whose hemicellulose is arabinoglucuronoxylan, respectively. In addition, fusion of CrCBM2 with a GH10 xylanase enhanced its catalytic activity against the branched xylan and improved the synergistic hydrolysis efficiency by more than fivefold when delignified corncob was used as substrate. Such a strong stimulation of hydrolysis resulted from the enhancement of hemicellulose hydrolysis on the one hand, and the cellulose hydrolysis is also improved according to the lignocellulose conversion rate measured by HPLC.

CONCLUSIONS

This study identifies the functions of two novel CBMs in CrXyl30 and shows the good potential of such CBMs specific for branched ligands in the development of efficient enzyme preparations.

The last 25 years of research on bioflocculants for kaolin flocculation with recent trends and technical challenges for the future

The generation of kaolin-containing wastewater is an inevitable consequence in a number of industries including mining, wastewater treatment, and bitumen processing. In some cases, the production of kaolin tailings waste during the production of bitumen or phosphate is as high as 3 times greater than the actual produced product. The existing inventory of nearly five billion barrels of oil sands tailings alone represents a massive storage and reclamation challenge, as well as a significant economic and environmental liability. Current reclamation options like inorganic coagulants and organic synthetic polymers may settle kaolin effectively, but may themselves pose an additional environmental hazard. Bioflocculants are an emerging alternative, given the inherent safety and biodegradability of their bio-based compositions. This review summarizes the different research attempts towards a better bioflocculant of kaolin, with a focus on the bioflocculant source, composition, and effective flocculating conditions. Bacillus bacteria were the most prevalent single species for bioflocculant production, with wastewater also hosting a large number of bioflocculant-producing microorganisms while serving as an inexpensive nutrient. Effective kaolin flocculation could be obtained over a broad range of pH values (1-12) and temperatures (5-95°C). Uronic acid and glutamic acid were predominant sugars and amino acids, respectively, in a number of effective bioflocculants, potentially due to their structural and charge similarities to effective synthetic polymers like polyacrylamide. Overall, these results demonstrate that bioflocculants can be produced from a wide range of microorganisms, can be composed of polysaccharides, protein or glycoproteins and can serve as effective treatment options for kaolin. In some cases, the next obstacle to their wide-spread application is scaling to industrially relevant volumes and their deployment strategies.

γ-Polyglutamic Acid Production, Biocontrol, and Stress Tolerance: Multifunction of Bacillus subtilis A-5 and the Complete Genome Analysis

Bacillus subtilis A-5 has the capabilities of high-molecular-weight γ-PGA production, antagonism to plant pathogenic fungi, and salt/alkaline tolerance. This multifunctional bacterium has great potential for enhancing soil fertility and plant security in agricultural ecosystem. The genome size of B. subtilis A-5 was 4,190,775 bp, containing 1 Chr and 2 plasmids (pA and pB) with 43.37% guanine-cytosine content and 4605 coding sequences. The γ-PGA synthase gene cluster was predicted to consist of pgsBCA and factor (pgsE). The γ-PGA-degrading enzymes were mainly pgdS, GGT, and cwlO. Nine gene clusters producing secondary metabolite substances, namely, four unknown function gene clusters and five antibiotic synthesis gene clusters (surfactin, fengycin, bacillibactin, subtilosin_A, and bacilysin), were predicted in the genome of B. subtilis A-5 using antiSMASH. In addition, B. subtilis A-5 contained genes related to carbohydrate and protein decomposition, proline synthesis, pyruvate kinase, and stress-resistant proteins. This affords significant insights into the survival and application of B. subtilis A-5 in adverse agricultural environmental conditions.

Microalgae harvesting techniques: updates and recent technological interventions

Microalgal biomass has garnered attention as a renewable and sustainable resource for producing biodiesel. The harvesting of microalgal biomass is a significant bottleneck being faced by the industries as it is the crucial cost driver in the downstream processing of biomass. Bioharvesting of microalgal biomass mediated by: microbial, animal, and plant-based polymeric flocculants has gained a higher probability of utility in accumulation due to: its higher dewatering potential, less toxicity, and ecofriendly properties. The present review summarizes the key challenges and the technological advancements associated with various such harvesting techniques. The economic and technical aspects of different microalgal harvesting techniques, particularly the cationic polymeric flocculant-based harvesting of microalgal biomass, are also discussed. Furthermore, interactions of flocculants with microalgal biomass and the effects of these interactions on metabolite and lipid extractions are discussed to offer a promising solution for suitability in selecting the most efficient and economical method of microalgal biomass harvesting for cost-effective biodiesel production.

One-step fermentation for producing xylo-oligosaccharides from wheat bran by recombinant Escherichia coli containing an alkaline xylanase

BACKGROUND

One-step fermentation is a cheap way to produce xylo-oligosaccharides (XOS), where production of xylanases and XOS is integrated into a single process. In spite of cost advantage, one-step fermentation is still short in yield so far due to the limited exploration. To cope with this issue, production of XOS from wheat bran by recombinant Escherichia coli through one-step fermentation was investigated in this study.

RESULTS

An endo-β-1,4-xylanase gene belonging to glycoside hydrolase family 11 of Bacillus agaradhaerens was employed to construct recombinant E. coli. This xylanase showed maximal activity at 60 °C and pH 8.0-8.5. Its activity retained more than 60% after incubation at 70 °C for 4 h, showing a good stability. The recombinant E. coli BL21(DE3) could secreted xylanases that directly hydrolyzed de-starched wheat bran to XOS in fermentation medium. The XOS generated from hydrolysis consisted of xylose, xylobiose and xylotriose accounting for 23.1%, 37.3% and 39.6%, respectively. Wheat bran concentration was found to be the most crucial factor affecting XOS production. The XOS concentration reached 5.3 mg/mL at 10% loading of wheat bran, which is higher than those of previous researches. Nitrogen source type could also affect production of XOS by changing extracellular xylanase activity, and glycine was found to be the best one for fermentation. Optimal fermentation conditions were finally studied using response surface optimization. The maximal concentration emerged at 44.3 °C, pH 7.98, which is affected by characteristics of the xylanase as well as growth conditions of E. coli.

CONCLUSIONS

This work indicates that the integrated fermentation using recombinant E. coli is highly competitive in cost and final concentration for producing XOS. Results can also provide theoretical basis for large-scale production and contribute to the wide adoption of XOS.

A novel polysaccharides-based bioflocculant produced by Bacillus subtilis ZHX3 and its application in the treatment of multiple pollutants

A high bioflocculant-producing bacterial strain was identified and named Bacillus subtilis ZHX3. Single-factor experiments suggested that 10 g/L starch and 5 g/L yeast extract were optimal for strain ZHX3 to produce bioflocculant MBF-ZHX3. The maximum flocculating rate reached 95.5%, and 3.14 g/L product was extracted after 3 days of cultivation. MBF-ZHX3 was mainly composed of polysaccharides (77.2%) and protein (14.8%). The polysaccharides contained 28.9% uronic acid and 3.7% amino sugar. Rhamnose, arabinose, galactose, glucose, mannose, and galacturonic acid in a molar ratio of 0.35:1.83:3.09:12.66:0.46:3.81 were detected. MBF-ZHX3 had a molecular weight of 10,028 Da and contained abundant groups (-OH, CO, >PO, C-O-C) contributing to flocculation. Adsorption and bridging was considered as the main flocculation mechanism. MBF-ZHX3 was more effective in decolorizing dyes, removing heavy metals and flotation reagents compared to polyacrylamide. The results implied that MBF-ZHX3 has the potential to substitute polyacrylamide in wastewater treatment because of its excellent biological and environmental benefits.

Optimal production of bioflocculant from Pseudomonas sp. GO2 and its removal characteristics of heavy metals

Bioflocculant may be a promising bioactivator for heavy metal removal duo to its eco-friendly properties and remarkable ability to adsorb heavy metals. In this study, bioflocculant production from a bacterium, Pseudomonas sp. GO2, was optimized and its removal efficiency for two heavy metal ions was evaluated. Results demonstrated that the maximal flocculation efficiency was achieved with concentration levels of 5 g/L glucose, 3 g/L casein, and 5 g/L NaCl, with an initial pH of 9.0, and a fermentation time of 48 h. Bioflocculant produced by GO2 had a stronger removal efficiency for Cd²⁺ than that of Pb²⁺, with highest removal efficiencies of 85.38% and 80.87%, respectively. The adsorption process was mainly dependent on the monolayer and chemisorption based on the adsorption isotherm and kinetic models. This study demonstrated that bioflocculant produced by the GO2 strain has the potential to be used in heavy metal treatment from industrial wastewater.

Physicochemical factors affecting flocculating properties of the proteoglycan isolated from Rhodococcus opacus

The water-soluble fraction of proteoglycan RS-89 isolated from the Rhodococcus opacus FCL89 and composed of 64.6% polysaccharide and 9.44% protein has been studied as regards its flocculating activity. The RS-89 polysaccharide component includes mannose, galactose and glucose at the molar ratio of 2.7: 1.3: 1. The basic factors affecting flocculating activity of the RS-89 have been established. Additionally, the kinetics of kaolin sedimentation without and with the bioflocculant was investigated. The presence of divalent metal ions had a positive effect on the flocculating activity of the RS-89. The addition of Ca2+ increased the RS-89 flocculating activity in comparison to the other studied metals. It was proved that the proteoglycan RS-89 achieved the highest flocculating activity at the concentration equal to 2 mg/L and in the presence of 10 mmol/L of Ca2+. The zeta potential values are less negative when there is an interaction between the kaolin particles and metal ions without the RS-89 in the tested systems. Therefore, the proposed mechanism to describe the proteoglycan interaction with kaolin particles in the presence of divalent ions includes charge neutralization and a bridging mechanism.

Recent advances and perspectives in efforts to reduce the production and application cost of microbial flocculants

Microbial flocculants are macromolecular substances produced by microorganisms. Due to its non-toxic, harmless, and biodegradable advantages, microbial flocculants have been widely used in various industrial fields, such as wastewater treatment, microalgae harvest, activated sludge dewatering, heavy metal ion adsorption, and nanoparticle synthesis, especially in the post-treatment process of fermentation with high safety requirement. However, compared with the traditional inorganic flocculants and organic polymeric flocculants, the high production cost is the main bottleneck that restricts the large-scale production and application of microbial flocculants. To reduce the production cost of microbial flocculant, a series of efforts have been carried out and some exciting research progresses have been achieved. This paper summarized the research advances in the last decade, including the screening of high-yield strains and the construction of genetically engineered strains, search of cheap alternative medium, the extraction and preservation methods, microbial flocculants production as an incidental product of other biological processes, combined use of traditional flocculant and microbial flocculant, and the production of microbial flocculant promoted by inducer. Moreover, this paper prospects the future research directions to further reduce the production cost of microbial flocculants, thereby promoting the industrial production and large-scale application of microbial flocculants.

Bioflocculants from wastewater: Insights into adsorption affinity, flocculation mechanisms and mixed particle flocculation based on biopolymer size-fractionation

HYPOTHESIS

Microbial extracellular polymeric substances (EPS) produced from wastewater are generally heterodispersed, which is expected to influence their flocculation performances and mechanism, particularly in mixed particle systems. The different molecular weight (MW) fractions should contribute to the overall adsorption affinity and flocculation mechanism of EPS in single and dual clay systems.

EXPERIMENTS

EPS harvested from bioreactors were size-fractionated into high, medium and low MW fractions (HMW, MMW, LMW, respectively). The harvested mixed EPS and its fractions were characterised by diverse analytical techniques coupled with optical reflectometry to investigate the role of each EPS fraction in the overall flocculation mechanism of EPS in kaolinite and montmorillonite clay systems.

FINDINGS

In single clay systems, both the harvested mixed EPS and the HMW-EPS fraction showed comparable flocculation performances. However, mixed EPS proved to be more efficient than the HMW-EPS fraction for dual clay flocculation. Site blocking effects were observed in mixed EPS: the LMW and MMW EPS first adsorbed to the surface due to higher diffusivities and faster mass transfer to the interface, while the HMW-EPS were slowly transported but were attached to the surface irreversibly and stronger than the LMW/MMW-EPS. We propose from this, a mixed EPS adsorption mechanism: extended anionic polymer tails in solution, thereby enhancing particle flocculation.

Challenges and Opportunities of Biocoagulant/Bioflocculant Application for Drinking Water and Wastewater Treatment and Its Potential for Sludge Recovery

The utilization of metal-based conventional coagulants/flocculants to remove suspended solids from drinking water and wastewater is currently leading to new concerns. Alarming issues related to the prolonged effects on human health and further pollution to aquatic environments from the generated nonbiodegradable sludge are becoming trending topics. The utilization of biocoagulants/bioflocculants does not produce chemical residue in the effluent and creates nonharmful, biodegradable sludge. The conventional coagulation-flocculation processes in drinking water and wastewater treatment, including the health and environmental issues related to the utilization of metal-based coagulants/flocculants during the processes, are discussed in this paper. As a counterpoint, the development of biocoagulants/bioflocculants for drinking water and wastewater treatment is intensively reviewed. The characterization, origin, potential sources, and application of this green technology are critically reviewed. This review paper also provides a thorough discussion on the challenges and opportunities regarding the further utilization and application of biocoagulants/bioflocculants in water and wastewater treatment, including the importance of the selection of raw materials, the simplification of extraction processes, the application to different water and wastewater characteristics, the scaling up of this technology to a real industrial scale, and also the potential for sludge recovery by utilizing biocoagulants/bioflocculants in water/wastewater treatment.

Marine Actinobacteria Bioflocculant: A Storehouse of Unique Biotechnological Resources for Wastewater Treatment and Other Applications

The bioactive compounds produced by actinobacteria have played a major role in antimicrobials, bioremediation, biofuels, enzymes, and anti-cancer activities. Biodegradable microbial flocculants have been produced by bacteria, algae, and fungi. Microbial bioflocculants have also attracted biotechnology importance over chemical flocculants as a result of degradability and environmentally friendly attributes they possess. Though, freshwater actinobacteria flocculants have been explored in bioflocculation. Yet, there is a paucity of information on the application of actinobacteria flocculants isolated from the marine environment. Similarly, marine habitats that supported the biodiversity of actinobacteria strains in the field of biotechnology have been underexplored in bioflocculation. Hence, this review reiterates the need to optimize culture conditions and other parameters that affect bioflocculant production by using a response surface model or artificial neural network.

Production of bioflocculant using feather waste as nitrogen source and its use in recycling of straw ash-washing wastewater with low-density and high pH property

Straw ash-washing wastewater is generated in the process of straw combustion power generation and potash fertilizer production. The suspended solid particles in straw ash-washing wastewater are hard to be settled down due to its low-density and high pH properties which inhibit the application of traditional chemical flocculants. Bioflocculant has good advantages in flocculating activity, biodegradability and adaptability of wastewater pH fluctuation. However, high production cost limited the large-scale applications of bioflocculant in wastewater treatment. In this study, the feasibility of using feather waste as cheap alternative nitrogen source of alkaliphilic Bacillus agaradhaerens C9 to produce bioflocculant was investigated. The results showed that strain C9 could simultaneously produce keratinase and bioflocculant, and thereby producing bioflocculant (named as BFF) using feather waste as cheap nitrogen source. The optimal fermentation conditions for enzymatic hydrolysis of feather waste and BFF production was 40 g/L feather wastes, 16 g/L glucose, 37 °C and pH 9.5, and the highest yield of 2.5 g/L was obtained. Moreover, BFF was used to flocculate straw ash-washing wastewater which exhibits low-density and high pH properties, and the highest flocculating rate of 93.1% was achieved when 6.0 mg/L BFF was added. This study reported for the first time that feather waste was used as inexpensive alternative nitrogen source for producing bioflocculant which could treat straw ash-washing wastewater, thereby promoting the resourceful utilization of feather waste and the reuse of straw ash-washing wastewater.

Bioconversion of citrus peel wastes into bioflocculants and their application in the removal of microcystins

In this study, the mechanism for converting citrus peel wastes (CPW) into bioflocculants using Alcaligenes faecalis subsp. phenolicus ZY-16 was analysed. The results demonstrated that the ZY-16 strain could produce various lignocellulolytic enzymes, containing cellulase, hemicellulase, pectinase, protease, and ligninase, enhancing the hydrolysis of citrus peel wastes. Molecular distillation removes antimicrobial limonene, which could inhibit bioflocculant production. The optimal fermentation conditions with the highest bioflocculant yield (3.49 g/L) were 38.79 g/L of CPW, 35.54 °C, and pH 4.48. Furthermore, the bioflocculant was used to eliminate microcystins for the first time, and the highest removal efficiency (90.05%) was achieved at a pH of 3.0, after 800 mg/L of bioflocculant was added into the microcystins solution (10 mg/L) for 60 min. Therefore, this paper demonstrated that CPW could be a cost-effective feedstock for the production of bioflocculants, which have potential application in microcystin removal.

Aloe sp. leaf gel and water glass for municipal wastewater sludge treatment and odour removal

Aloe gel (Alg), which is a natural extract from the Aloe sp. plant, was evaluated in this study for its potential use as a bioflocculant to treat urban wastewater sewage sludge. The gel was used alone and combined with water glass (WG) under controlled conditions in laboratory experiments. Alg was found effective to settle the flocculated sludge rapidly and remove distinctive unpleasant odours of the sludge as highlighted by gas chromatography-mass spectrometry (GC/MS) analysis. Furthermore, Alg was pH tolerant and had no effect in changing the pH of the wastewater. The optimum dose of Alg was 3% at which a sludge volume index (SVI) of 45.4 mL/g was obtained within 30 min settling time. To enhance the treatment performances of Alg, WG was also evaluated as an alkali agent to further reduce the chemical oxygen demand (COD) and ammonia (NH₄-N) in the wastewater. At equal doses of 3% of WG and Alg each, the combined treatment outcomes showed high turbidity and NH₄-N removals of 83 and 89%, respectively, but the overall COD removal was at best 25%. The settling rate of treated sludge with combined Alg/WG was very rapid giving an SVI of 25.4 mL/g within only 5 min.

Natural polymer matrix as safe flocculant to remove turbidity from kaolin suspension: Performance and governing mechanism

Conventional flocculants bear environmental and health concerns which could be avoided by applying natural materials, particularly polysaccharide and glycoprotein-containing ones. In the present study, yeast cell wall (YCW), a natural polymer matrix, was used as natural flocculant. To prepare YCW, Saccharomyces cerevisiae was cultivated in bench scale fermenter. After characterization, YCW was employed as anionic flocculant in jar tests to remove turbidity from kaolin suspensions at different conditions where either alum or poly aluminum chloride (PAC) was coagulant. Generally, the lower coagulant consumption, higher turbidity removal or faster sedimentation was observed by using YCW as flocculant. The developed flocculant was more effective in the presence of PAC compared to alum. At best, by applying 300 mg/L YCW, the highest turbidity removals of 98 and 97% were achieved using 10 ppm PAC at pH 6.5 and 50 ppm alum at pH 7.5, respectively. The presence of the flocculant in the structure of the flocs was proved by FTIR analysis. The final pH of the treated suspensions was suitable for discharge purpose without the need for neutralization. The excess positive charge neutralization and bridging were the governing mechanism in coagulation-flocculation process. YCW with proper performance, GRAS designation and readily availability can be considered as natural alternative to chemical anionic flocculants where the process needs safe compounds.

Alkaliphiles: The Versatile Tools in Biotechnology

The extreme environments within the biosphere are inhabited by organisms known as extremophiles. Lately, these organisms are attracting a great deal of interest from researchers and industrialists. The motive behind this attraction is mainly related to the desire for new and efficient products of biotechnological importance and human curiosity of understanding nature. Organisms living in common "human-friendly" environments have served humanity for a very long time, and this has led to exhaustion of the low-hanging "fruits," a phenomenon witnessed by the diminishing rate of new discoveries. For example, acquiring novel products such as drugs from the traditional sources has become difficult and expensive. Such challenges together with the basic research interest have brought the exploration of previously neglected or unknown groups of organisms. Extremophiles are among these groups which have been brought to focus and garnering a growing importance in biotechnology. In the last few decades, numerous extremophiles and their products have got their ways into industrial, agricultural, environmental, pharmaceutical, and other biotechnological applications.Alkaliphiles, organisms which thrive optimally at or above pH 9, are one of the most important classes of extremophiles. To flourish in their extreme habitats, alkaliphiles evolved impressive structural and functional adaptations. The high pH adaptation gave unique biocatalysts that are operationally stable at elevated pH and several other novel products with immense biotechnological application potential. Advances in the cultivation techniques, success in gene cloning and expression, metabolic engineering, metagenomics, and other related techniques are significantly contributing to expand the application horizon of these remarkable organisms of the 'bizarre' world. Studies have shown the enormous potential of alkaliphiles in numerous biotechnological applications. Although it seems just the beginning, some fantastic strides are already made in tapping this potential. This work tries to review some of the prominent applications of alkaliphiles by focusing such as on their enzymes, metabolites, exopolysaccharides, and biosurfactants. Moreover, the chapter strives to assesses the whole-cell applications of alkaliphiles including in biomining, food and feed supplementation, bioconstruction, microbial fuel cell, biofuel production, and bioremediation.

Production of glycoprotein bioflocculant from untreated rice straw by a CAZyme-rich bacterium, Pseudomonas sp. HP2

It has been reported that certain biomass-degrading bacteria can produce bioflocculant through directly utilizing untreated biomass as carbon source. However, little is known about the synthesis mechanism of bioflocculant in these bacteria. In this study, a biomass-degrading bacterium Pseudomonas sp. HP2 showing excellent production ability of bioflocculant was isolated from the forest soil. The HP2 strain secreted alkali-thermo-tolerant CMCase and xylanase, with the maximum activities of 0.06 and 1.07 U ml^-1, respectively, when the untreated rice straw was used as carbon source. The maximum flocculating efficiency with the value of 92.5% was produced from untreated rice straw by HP2 strain. Component analysis showed that this bioflocculant was abundant in the amino acids and monosaccharides with the total contents of 384.9 and 478.3 mg g^-1 dry bioflocculant, respectively. The most amino acid and monosaccharide in this bioflocculant were proline and rhamnose, which accounted for 26.5% and 33.3% of total amino acids and total monosaccharides, respectively. To explore the synthesis mechanism of bioflocculant in HP2, the genome of HP2 strain was measured by Illumina HiSeq PE150 platform. The results showed that the genome of HP2 strain possessed abundant CAZy family related genes, which may play an important role in biomass degradation and bioflocculant synthesis.

Bioconversion of kitchen wastes into bioflocculant and its pilot-scale application in treating iron mineral processing wastewater

In this study, the feasibility of converting kitchen waste into bioflocculant using Bacillus agaradhaerens C9 was analyzed. The result showed that strain C9 could secrete various degrading enzymes, including amylase, protease, lipase, cellulase, xylanase and pectinase, promoting the hydrolysis of kitchen waste. Strong alkaline fermentation condition was able to induce the bioflocculant production, and inhibit the growth of contaminated bacteria, which avoids the sterilization process of kitchen waste. The optimum fermentation condition for enzymatic hydrolysis and bioflocculant production was 40 g/L kitchen waste, 37 °C, pH 9.5, and the highest bioflocculant yield of 6.92 g/L was achieved. Furthermore, bioflocculant was applied to treat pilot-scale (30 L) of mineral processing wastewater for the first time, and the removal rate of 92.35% was observed when 9 mg/L bioflocculant was added into wastewater. Therefore, this study could promote the resource utilization of kitchen waste and recycling of mineral processing wastewater.

Efficient microalgae removal from aqueous medium through auto-flocculation: investigating growth-dependent role of organic matter

This study investigated the growth-dependent role of algal organic matters (AOMs) to achieve high removal efficiency (R.E) of microalgae. The results showed that the microalgae cells produced 96 ± 2% of total AOMs as loose bound AOMSS (LB-AOMs) and 4 ± 1% as cell-bound (CB-AOMs) in exponential phase. In stationary phase, LB-AOMs and CB-AOMs were 46 ± 0.7percentage and 54 ± 0.2 percentage, respectively. The R.Es in exponential and stationary phase were 83 ± 2.6% and 66 ± 1.2%, respectively. It is found that the difference of biomass concentration (between exponential and stationary phase) had no significant impact on the R.E (P > 0.01). Further investigations revealed that LB-AOMs inhibit flocculation in exponential and CB-AOMs in stationary phase; however, CB-AOMs showed stronger inhibition than the LB-AOMs (P < 0.01). The provision of calcium (17 ± 0.9 mg/L) to the culture reduced the AOMs inhibition and improved the R.E from 66 ± 1.2% (in control) to 90 ± 4.2%. An increase in R.E was attributed to the interaction of calcium with AOMs and subsequently acting as a flocculant. The findings of this study can be valuable to improve the performance of auto-flocculation technology, which is mainly limited by the presence of AOMs. Graphical Abstract.

Nonferrous metal (loid) s mediate bacterial diversity in an abandoned mine tailing impoundment

Migration and transformation of toxic metal (loid) s in tailing sites inevitably lead to ecological disturbances and serious threats to the surroundings. However, the horizontal and vertical distribution of bacterial diversity has not been determined in nonferrous metal (loid) tailing ponds, especially in Guangxi China, where the world's largest and potentially most toxic sources of metal (loid) s are located. Distribution of bacterial communities was stable at horizontal levels. At the surface (0-10 cm), the stability was most attributed to Bacillus and Enterococcus, while bacterial communities at the subsurface (50 cm) were mainly contributed by Nitrospira and Sulfuricella. Variable vertical distribution of bacterial communities has led to the occurrence of specific genera and specific predicted functions (such as transcription regulation factors). Sulfurifustis (a S-oxidizing and inorganic carbon fixing bacteria) genera were specific at the surface, whereas Streptococcus-related genera were found at the surface and subsurface, but were more abundant in the latter depth. Physical-chemical parameters, such as pH, TN, and metal (loid) (As, Cd, Pb, Cu, and Zn) concentrations were the main drivers of bacterial community abundance, diversity, composition, and metabolic functions. These results increase our understanding of the physical-chemical effects on the spatial distribution of bacterial communities and provide useful insight for the bioremediation and site management of nonferrous metal (loid) tailings.

Preparation and characterization of a substitute for Ruditapes philippinarum conglutination mud as a natural bioflocculant

In this study a preparation strategy was attempted to produce a substitute (BBF) for the Ruditapes philippinarum conglutination mud (RPM), which was newly discovered to be a promising natural bioflocculant resource. A stable yield of 73.77 ± 1.79 g L^-1 BBF was established by a sequential batch fermentation under optimized conditions via single factor experiments. BBF attained similar flocculation performance as RPM, showing a maximum flocculation rate of 87.92 ± 0.65%. BBF had significant decolorization efficiency on methylene blue, crystal violet and malachite green by 98.78 ± 0.46%, 89.37 ± 0.35% and 99.11 ± 0.17%, respectively. BBF could harvest microalgae Chlorella salina by 84.38 ± 0.57%. High throughput sequencing revealed that Vibrio and Bacillus might be the extracellular polysaccharides producers. The successful preparation will enable a potential industrial production of BBF thus avoid scattered collection of RPM.

Enhanced efficiency of swine wastewater treatment by the composite of modified zeolite and a bioflocculant enriched from biological sludge

A high-ammonia-resistant strain was firstly isolated from activated sludge and applied to harvest a bioflocculant from a swine wastewater. Enhancement of swine wastewater treatment was investigated by a composite of the harvested bioflocculant and a zeolite modified by integrating calcinations with MgO at 400°C. Results have demonstrated that 71.8% of Chemical Oxygen Demand (COD), 54.5% of ammonia, and 81.2% of turbidity can be removed from the swine wastewater by the bioflocculant alone. Results have also demonstrated that 73.4% of ammonia could be removed from the swine wastewater by the modified zeolite alone, while almost no COD was removed. Thus, the bioflocculant and modified zeolite were used simultaneously to enhance swine wastewater treatment, and response surface methodology (RSM) was employed to optimize the treatment process. Under the optimal treatment conditions of bioflocculant of 12 mg/L, modified zeolite of 8 g/L, pH of 7.5, and agitation speed of 200 r/min, obtained by the RSM, 88.6% of COD, 85.8% of ammonia, and 95.5% of turbidity could be removed from swine wastewater, which were significantly improved compared with that by the bioflocculant or modified zeolite alone. The use of the composite exerted advantages of the bioflocculant and modified zeolite, and provided a feasible way to improve pollutants' removal from wastewaters.

Microbial Flocculants as an Alternative to Synthetic Polymers for Wastewater Treatment: A Review

Microorganisms such as bacteria, fungi, and microalgae have been used to produce bioflocculants with various structures. These polymers are active substances that are biodegradable, environmentally harmless, and have flocculation characteristics. Most of the developed microbial bioflocculants displayed significant flocculating activity (FA > 70–90%) depending on the strain used and on the operating parameters. These biopolymers have been investigated and successfully used for wastewater depollution in the laboratory. In various cases, selected efficient microbial flocculants could reduce significantly suspended solids (SS), turbidity, chemical oxygen demand (COD), total nitrogen (Nt), dye, and heavy metals, with removal percentages exceeding 90% depending on the bioflocculating materials and on the wastewater characteristics. Moreover, bioflocculants showed acceptable results for sludge conditioning (accepted levels of dry solids, specific resistance to filtration, moisture, etc.) compared to chemicals. This paper explores various bioflocculants produced by numerous microbial strains. Their production procedures and flocculating performance will be included. Furthermore, their efficiency in the depollution of wastewater will be discussed.

Characterization and coagulation-flocculation performance of a composite flocculant in high-turbidity drinking water treatment

Klebsiella variicola B16, a microbial bioflocculant (MBF-B16)-producing bacteria, was isolated and identified by its 16S rRNA sequence, biochemical properties, and physiological characteristics. The effects of culture conditions on MBF-B16 production, including carbon source, nitrogen source, C/N ratio, initial pH, and culture temperature, were investigated in this study. Results showed that 6.96 g of MBF-B16 could be extracted from a 1-L culture broth under optimized conditions. Chemical analysis showed that polysaccharide and protein were the main components. The neutral sugar consisted of galactose only, which was proposed in Klebsiella genus for the first time. In addition, a composite flocculant (CF) that contains polyaluminum ferric chloride (PAFC) and MBF-B16 for the removal of turbidity and SS in drinking water was optimized by response surface methodology. CF could reduce PAFC dosage by about 56.2-72%. Charge neutralization and adsorption bridging effect were the primary flocculation mechanisms.

Bioflocculants' production from a cellulase-free xylanase-producing Pseudomonas boreopolis G22 by degrading biomass and its application in cost-effective harvest of microalgae

The major problem for industrial application of bioflocculants is its high production cost. Here, a novel bacterium Pseudomonas boreopolis G22, which can secret a cellulase-free xylanase and simultaneously produce bioflocculants (MBF-G22) through directly converting untreated biomass, was isolated. The bioflocculants' production of G22 was closely related to its xylanase activity, hydrolysis ability of biomass and the hemicellulose loss caused by G22. The optimal fermentation conditions with the highest bioflocculants' yield (3.75 mg g^-1 dry biomass) were obtained at the fermentation time of 96 h, incubation temperature of 30 °C, inoculum concentration of 1.0% and biomass concentration of 1.0% in an initial pH value of 7.0. MBF-G22 mainly consisted of polysaccharides (63.3%) with a molecular weight of 3.982 × 10⁶ Da and showed the highest flocculating efficiency of 97.1% at a dosage of 3.5 mg L^-1. In addition, MBF-G22 showed high flocculating efficiency of microalgae (95.7%) at a dosage of 80 mg L^-1.

Isolation, identification, and characterization of an Aspergillus niger bioflocculant-producing strain using potato starch wastewater as nutrilite and its application

A bioflocculant (MBFA18) was produced by Aspergillus niger (A18) using potato starch wastewater (PSW) as nutrients. The cultivation processes and flocculating treatment for PSW purification were systematically studied. The flocculating rate of the MBFA 18 achieved 90.06% (kaolin clay) under the optimal cultivation condition (PSW with 5950 mg/L COD, 20 g/L glucose, 0.2 g/L urea and without phosphorus source addition and pH adjustment). Furthermore, effects of flocculant dosage, initial pH, coagulant aid (CaCl₂) addition and sedimentation time on the PSW treatment were discussed and studied in detail. The optimum flocculation treatment conditions were determined according to the treatment efficiency, cost and flocculation conditions. During the PSW treatment, 2 mL/L bioflocculant (1.89 g/L) dosage and 0.5 mol/L coagulant aid addition were applied without pH adjustment and 91.15% COD and 60.22% turbidity removal rate could be achieved within 20 min. The comparative study between the bioflocculant and conventional chemical flocculants showed excellent flocculating efficiency of MBFA 18 with lower cost (4.7 yuan/t), which indicated that the bioflocculant MBFA 18 produced in PSW substrate has a great potential to be an alternative flocculant in PSW treatment.

Production and flocculating properties of a compound biopolymer flocculant from corn ethanol wastewater

A compound biopolymer flocculant (CBF) produced using corn ethanol wastewater as substrate was investigated. After optimization of culture conditions, 3.08 g/L of purified CBF was extracted from the culture broth following 48 h of cultivation. The CBF macromolecule is mainly composed of protein (15.9%) and polysaccharide (81.8%). The polysaccharide component includes neutral sugars (28.92%), amino sugars (4.04%) and uronic acid (11.69%), with the neutral sugars being glucose, mannose, and lactose at a molar ratio of 4.1:1.5:1.9. CBF is pH tolerant from 3.0 to 12.0 and thermal tolerant from 20 to 100 °C, allowing for its application over a wide range of conditions. Furthermore, the Langmuir model better describes CBF adsorption on kaolin clay, as compared to the Freundlich model. Charge neutralization and bridging mechanisms are the primary flocculation mechanisms. In addition, CBF shows a high methylene blue removal efficiency. These results indicate that this compound biopolymer flocculant has great potential in dye wastewater treatment.

Recent advances in polysaccharide bio-based flocculants

Natural polysaccharides, derived from biomass feedstocks, marine resources, and microorganisms, have been attracting considerable attention as benign and environmentally friendly substitutes for synthetic polymeric products. Besides many other applications, these biopolymers are rapidly emerging as viable alternatives to harmful synthetic flocculating agents for the removal of contaminants from water and wastewater. In recent years, a great deal of effort has been devoted to improve the production and performance of polysaccharide bio-based flocculants. In this review, current trends in preparation and chemical modification of polysaccharide bio-based flocculants and their flocculation performance are discussed. Aspects including mechanisms of flocculation, biosynthesis, classification, purification and characterization, chemical modification, the effect of physicochemical factors on flocculating activity, and recent applications of polysaccharide bio-based flocculants are summarized and presented.

Complete Genome Sequence of a Novel Bioflocculant-Producing Strain, Microbacterium paludicola CC3

Microbacterium paludicola CC3 exhibits the capability to produce polysaccharide bioflocculants. Here, we report the whole-genome sequence of M. paludicola CC3, which may be helpful in understanding the genetic basis of the biosynthesis of polysaccharide bioflocculants as well as in promoting its production and application in industrial fields.

Novel bioflocculant produced by salt-tolerant, alkaliphilic strain Oceanobacillus polygoni HG6 and its application in tannery wastewater treatment

The optimized production of MBF-HG6, which is a novel salt-tolerant alkaliphilic bioflocculant produced by Oceanobacillus polygoni with its application in tannery wastewater treatment was investigated in this study. It was found the optimal carbon source, nitrogen source, cation, and initial pH of the medium for bioflocculant production were starch, urea, Fe2+, and pH 9.0, respectively. The best stability in the temperature range was from 0 to 80°C and the purified MBF-HG6 contained polysaccharides of 81.53% and proteins of 9.98%. The carboxyl, hydroxyl, and amino groups were determined in bioflocculants, while the optimized bioflocculating activity was observed as 90.25% for the dosages of 6.96mL MBF-HG6, 4.77mL CaCl2 (1%, m/v), and 19.24g/L NaCl using response surface methodology. In addition, SS and turbidity removal rates of the tannery wastewater (4g/L MBF-HG6) could, respectively, reach 46.49% and 91.08%, indicating that the great potential was emerged in enhancement of tannery wastewater treatment by MBF-HG6.

Valorization of untreated rice bran towards bioflocculant using a lignocellulose-degrading strain and its use in microalgal biomass harvest

BACKGROUND

Microalgae are currently considered as a promising feedstock for the production of biofuels and high-value products. However, the efficient harvest of microalgal biomasses from their culture broth is a major challenge. The harvesting of algal biomass by flocculation combined with gravity sedimentation is more convenient and cost-effective than traditional methods such as centrifugation and filtration. Compared to inorganic and chemically synthetic flocculants, bioflocculants are a suitable choice for microalgal harvest due to their biodegradable and nontoxic properties. Nonetheless, the high production costs associated with expensive substrates hinder the commercial applications of bioflocculants. Previous studies have shown that the hydrolysates of lignocellulosic biomasses from dilute acid hydrolysis can be utilized as an inexpensive carbon source for the production of bioflocculants. However, the toxic by-products generated in the dilute acid hydrolysis step limit the efficiency of subsequent fermentation. The strains that produce bioflocculants by using untreated lignocellulosic materials can circumvent the pretreatment process, as well as promote the application of bioflocculants in microalgal harvest.

RESULTS

Under alkaline fermentation conditions, the alkaliphilic strain Bacillus agaradhaerens C9 secreted 1.69 IU/mL of alkali-tolerant xylanase and 0.06 IU/mL of cellulase, indicating that this particular strain can efficiently convert untreated rice bran into bioflocculant (RBBF-C9), thereby circumventing rice bran pretreatment for downstream fermentation. The optimal fermentation conditions that result in the highest bioflocculant yield (12.94 g/L) were as follows: 20 g/L of untreated rice bran, 3 g/L of yeast extract, and 20 g/L of Na2CO3 at 37 °C for 24 h. RBBF-C9 contained 74.12% polysaccharides and 4.51% proteins, and was estimated to be 137 kDa. Furthermore, the bioflocculant RBBF-C9 exhibited good flocculating efficiency (91.05%) of oil alga Chlorella minutissima UTEX2341 when 60 mg/L of RBBF-C9 was added into the algal culture broth.

CONCLUSIONS

This study demonstrated that untreated rice bran is a suitable inexpensive substrate for the production of bioflocculants, and thus provides a novel approach in utilizing rice bran. The extracted bioflocculants may be potentially used in biomass harvesting of the oil algae C. minutissima UTEX2341 from the culture broth.

Production of a bioflocculant from Pseudomonas veronii L918 using the hydrolyzate of peanut hull and its application in the treatment of ash-flushing wastewater generated from coal fired power plant

In this study, bioflocculant produced by Pseudomonas veronii L918 was applied to treat ash-flushing wastewater. The strain L918 could convert the hydrolyzate of peanut hull into bioflocculant, which can effectively reduce the production cost of bioflocculant. The yield of 3.39g/L bioflocculant MBF-L918 was achieved when 300mL/L peanut hull hydrolyzate was used as carbon source. The bioflocculant MBF-L918 contains 77.14% polysaccharides and 4.84% proteins, and the molecular weight (MW) of MBF-L918 is 24.77kDa. Furthermore, MBF-L918 showed good flocculating efficiency of 92.51% to ash-flushing wastewater when 2.83mg/L MBF-L918 was added, and thus achieved the recycling of ash-flushing wastewater. This study reported for the first time that the bioflocculant was produced using peanut hull hydrolyzate and effectively applied in the treatment of coal ash-flushing wastewater.

Implications for public health demands alternatives to inorganic and synthetic flocculants: bioflocculants as important candidates

Chemical flocculants are generally used in drinking water and wastewater treatment due to their efficacy and cost effectiveness. However, the question of their toxicity to human health and environmental pollution has been a major concern. In this article, we review the application of some chemical flocculants utilized in water treatment, and bioflocculants as a potential alternative to these chemical flocculants. To the best of our knowledge, there is no report in the literature that provides an up‐to‐date review of the relevant literature on both chemical flocculants and bioflocculants in one paper. As a result, this review paper comprehensively discussed the various chemical flocculants used in water treatment, including their advantages and disadvantages. It also gave insights into bioflocculants production, challenges, various factors influencing their flocculating efficiency and their industrial applications, as well as future research directions including improvement of bioflocculants yields and flocculating activity, and production of cation‐independent bioflocculants. The molecular biology and synthesis of bioflocculants are also discussed.

Statistical optimization of harvesting Chlorella vulgaris using a novel bio-source, Strychnos potatorum

The present study was aimed at harvesting microalga, Chlorella vulgaris, by bioflocculation using seed powder of clearing nut, Strychnos potatorum. The research was essentially the prime step to yield a large biomass for utilising the cells in biodiesel production. Optimization of the parameters influencing bioflocculation was carried out statistically using RSM. The optimized conditions were 100 mg L^-1 bioflocculant concentration, 35 °C temperature, 150 rpm agitation speed and 30 min incubation time and resulted in a maximum efficiency of 99.68%. Through cell viability test, using Trypan blue stain, it was found that cells were completely intact when treated with bioflocculant, but destroyed when exposed to chemical flocculant, alum. The overall study represented that S. potatorum could potentially be a bioflocculant of microalgal cells and a promising substitute for expensive and hazardous chemical flocculants. Moreover, this bioflocculant demonstrated their utility to harvest microalgal cells by economically, effectively and in an ecofriendly way.

Characterization of a Bioflocculant (MBF-UFH) Produced by Bacillus sp. AEMREG7

A bioflocculant named MBF-UFH produced by a Bacillus species isolated from sediment samples of Algoa Bay of the Eastern Cape Province of South Africa was characterized. The bacterial identification was through 16S rDNA sequencing; nucleotide sequences were deposited in GenBank as Bacillus sp. AEMREG7 with Accession Number KP659187. The production of the bioflocculant was observed to be closely associated with cell growth. The bioflocculant had the highest flocculating activity of 83.2% after 72 h of cultivation, and approximately 1.6 g of purified MBF-UFH was recovered from 1 L of fermentation broth. Its chemical analyses indicated that it is a glycoprotein composed of polysaccharide (76%) and protein (14%). Fourier transform infrared spectroscopy (FTIR) revealed that it consisted of hydroxyl, amide, carboxyl and methoxyl as the functional moieties. Scanning electron microscopy (SEM) revealed the amorphous structure of MBF-UFH and flocculated kaolin clay particles. The maximum flocculating activity of 92.6% against kaolin clay suspension was achieved at 0.3 mg/mL over pH ranges of 3-11 with the peak flocculating rate at pH 8 in the presence of MgCl2. The bioflocculant retained high flocculating activity of 90% after heating at 100 °C for 1 h. MBF-UFH appears to have immense potential as an alternative to conventional chemical flocculants.

Bacillus toyonensis strain AEMREG6, a bacterium isolated from South African marine environment sediment samples produces a glycoprotein bioflocculant

A bioflocculant-producing bacteria, isolated from sediment samples of a marine environment in the Eastern Cape Province of South Africa demonstrated a flocculating activity above 60% for kaolin clay suspension. Analysis of the 16S ribosomal deoxyribonucleic acid (rDNA) nucleotide sequence of the isolate in the GenBank database showed 99% similarity to Bacillus toyonensis strain BCT-7112 and it was deposited in the GenBank as Bacillus toyonensis strain AEMREG6 with accession number KP406731. The bacteria produced a bioflocculant (REG-6) optimally in the presence of glucose and NH4NO3 as the sole carbon and nitrogen source, respectively, initial medium pH of 5 and Ca2+ as the cation of choice. Chemical analysis showed that purified REG-6 was a glycoprotein mainly composed of polysaccharide (77.8%) and protein (11.5%). It was thermally stable and had strong flocculating activity against kaolin suspension over a wide range of pH values (3-11) with a relatively low dosage requirement of 0.1 mg/mL in the presence of Mn2+. Fourier transform infrared spectroscopy (FTIR) revealed the presence of hydroxyl, carboxyl and amide groups preferred for flocculation. Scanning electron microscopy (SEM) revealed that bridging was the main flocculation mechanism of REG-6. The outstanding flocculating performance of REG-6 holds great potential to replace the hazardous chemical flocculants currently used in water treatment.