PhotoBiobox: A tablet sized, low-cost, high throughput photobioreactor for microalgal screening and culture optimization for growth, lipid content and CO2 sequestration

Long-term acclimation to organic carbon enhances the production of loliolide from Scenedesmus deserticola

Production of functional biocompounds from microalgae has garnered interest from different industrial sectors; however, their overall productivity must be substantially improved for commercialization. Herein, long-term acclimation of Scenedesmus deserticola was conducted using glucose as an organic carbon source to enhance its heterotrophic capabilities and the production potential of loliolide. A year-long acclimation on agar plates led to the selection of S. deserticola HS4, which exhibited at least 2-fold increase in loliolide production potential; S. deserticola HS4 was subjected to further screening of its cultivation conditions and fed-batch cultivation was subsequently performed in liter-scale reactors. While S. deserticola HS4 exhibited shifts in cellular morphology and biochemical composition, the results suggested a substantial increase in its loliolide productivity regardless of trophic modes. Collectively, these results highlight the potential of long-term acclimation as an effective strategy for improving microalgal crops to align with industrial production practices.

Realization process of microalgal biorefinery: The optional approach toward carbon net-zero emission

Increasing carbon dioxide (CO2) emission has already become a dire threat to the human race and Earth's ecology. Microalgae are recommended to be engineered as CO2 fixers in biorefinery, which play crucial roles in responding climate change and accelerating the transition to a sustainable future. This review sorted through each segment of microalgal biorefinery to explore the potential for its practical implementation and commercialization, offering valuable insights into research trends and identifies challenges that needed to be addressed in the development process. Firstly, the known mechanisms of microalgal photosynthetic CO2 fixation and the approaches for strain improvement were summarized. The significance of process regulation for strengthening fixation efficiency and augmenting competitiveness was emphasized, with a specific focus on CO2 and light optimization strategies. Thereafter, the massive potential of microalgal refineries for various bioresource production was discussed in detail, and the integration with contaminant reclamation was mentioned for economic and ecological benefits. Subsequently, economic and environmental impacts of microalgal biorefinery were evaluated via life cycle assessment (LCA) and techno-economic analysis (TEA) to lit up commercial feasibility. Finally, the current obstacles and future perspectives were discussed objectively to offer an impartial reference for future researchers and investors.

Cultivation of Chlorella sp. HS2 using wastewater from soy sauce factory

Incorporation of wastewater from industrial sectors into the design of microalgal biorefineries has significant potential for advancing the practical application of this emerging industry. This study tested various food industrial wastewaters to assess their suitability for microalgal cultivation. Among these wastewaters, defective soy sauce (DSS) and soy sauce wastewater (SWW) were chosen but DSS exhibited the highest nutrient content with 13,500 ppm total nitrogen and 3051 ppm total phosphorus. After diluting DSS by a factor of 50, small-scale cultivation of microalgae was conducted to optimize culture conditions. SWW exhibited optimal growth at 25-30 °C and 300-500 μE m-2 s-1, while DSS showed optimal growth at 30-35 °C. Based on a 100-mL lab-scale and 3-L outdoor cultivation with an extended cultivation period, DSS outperformed SWW, exhibiting higher final biomass productivity. Additionally, nutrient-concentrated nature of DSS is advantageous for transportation at an industrial scale, leading us to select it as the most promising feedstock for microalgal cultivation. With further optimization, DSS has the potential to serve as an effective microalgal cultivation feedstock for large-scale biomass production.

Morphological and physiological adaptations of psychrophilic Pseudarthrobacter psychrotolerans YJ56 under temperature stress

Both culture-independent and culture-dependent analyses using Nanopore-based 16S rRNA sequencing showed that short-term exposure of Antarctic soils to low temperature increased biomass with lower bacterial diversity and maintained high numbers of the phylum Proteobacteria, Firmicute, and Actinobacteria including Pseudarthrobacter species. The psychrophilic Pseudarthrobacter psychrotolerans YJ56 had superior growth at 13 °C, but could not grow at 30 °C, compared to other bacteria isolated from the same Antarctic soil. Unlike a single rod-shaped cell at 13 °C, strain YJ56 at 25 °C was morphologically shifted into a filamentous bacterium with several branches. Comparative genomics of strain YJ56 with other genera in the phylum Actinobacteria indicate remarkable copy numbers of rimJ genes that are possibly involved in dual functions, acetylation of ribosomal proteins, and stabilization of ribosomes by direct binding. Our proteomic data suggested that Actinobacteria cells experienced physiological stresses at 25 °C, showing the upregulation of chaperone proteins, GroEL and catalase, KatE. Level of proteins involved in the assembly of 50S ribosomal proteins and L29 in 50S ribosomal proteins increased at 13 °C, which suggested distinct roles of many ribosomal proteins under different conditions. Taken together, our data highlights the cellular filamentation and protein homeostasis of a psychrophilic YJ56 strain in coping with high-temperature stress.

Optogenetic control of beta-carotene bioproduction in yeast across multiple lab-scales

Optogenetics arises as a valuable tool to precisely control genetic circuits in microbial cell factories. Light control holds the promise of optimizing bioproduction methods and maximizing yields, but its implementation at different steps of the strain development process and at different culture scales remains challenging. In this study, we aim to control beta-carotene bioproduction using optogenetics in Saccharomyces cerevisiae and investigate how its performance translates across culture scales. We built four lab-scale illumination devices, each handling different culture volumes, and each having specific illumination characteristics and cultivating conditions. We evaluated optogenetic activation and beta-carotene production across devices and optimized them both independently. Then, we combined optogenetic induction and beta-carotene production to make a light-inducible beta-carotene producer strain. This was achieved by placing the transcription of the bifunctional lycopene cyclase/phytoene synthase CrtYB under the control of the pC120 optogenetic promoter regulated by the EL222-VP16 light-activated transcription factor, while other carotenogenic enzymes (CrtI, CrtE, tHMG) were expressed constitutively. We show that illumination, culture volume and shaking impact differently optogenetic activation and beta-carotene production across devices. This enabled us to determine the best culture conditions to maximize light-induced beta-carotene production in each of the devices. Our study exemplifies the stakes of scaling up optogenetics in devices of different lab scales and sheds light on the interplays and potential conflicts between optogenetic control and metabolic pathway efficiency. As a general principle, we propose that it is important to first optimize both components of the system independently, before combining them into optogenetic producing strains to avoid extensive troubleshooting. We anticipate that our results can help designing both strains and devices that could eventually lead to larger scale systems in an effort to bring optogenetics to the industrial scale.

Lab-scale photobioreactor systems: principles, applications, and scalability

Phototrophic microorganisms that convert carbon dioxide are being explored for their capacity to solve different environmental issues and produce bioactive compounds for human therapeutics and as food additives. Full-scale phototrophic cultivation of microalgae and cyanobacteria can be done in open ponds or closed photobioreactor systems, which have a broad range of volumes. This review focuses on laboratory-scale photobioreactors and their different designs. Illuminated microtiter plates and microfluidic devices offer an option for automated high-throughput studies with microalgae. Illuminated shake flasks are used for simple uncontrolled batch studies. The application of illuminated bubble column reactors strongly emphasizes homogenous gas distribution, while illuminated flat plate bioreactors offer high and uniform light input. Illuminated stirred-tank bioreactors facilitate the application of very well-defined reaction conditions. Closed tubular photobioreactors as well as open photobioreactors like small-scale raceway ponds and thin-layer cascades are applied as scale-down models of the respective large-scale bioreactors. A few other less common designs such as illuminated plastic bags or aquarium tanks are also used mainly because of their relatively low cost, but up-scaling of these designs is challenging with additional light-driven issues. Finally, this review covers recommendations on the criteria for photobioreactor selection and operation while up-scaling of phototrophic bioprocesses with microalgae or cyanobacteria.

Rapid screening of microalgae by a 96-hole air-flowing device

In this study, a 96-hole air-flowing device (96HAFD) was established for high-throughput screening of three mutant Chlorella strains under air aeration. 96HAFD was first tested for the confirmation of homogeneous air aeration cultivation environment at 1.2 L min^-1 for algal screening based on the results of t test (p < 0.05) in the verification of consistency experiment. Then the data of dynamic growth characteristics of three mutant Chlorella strains indicated the good agreement in three screening devices including 96HAFD, flask and tube air-flowing cultivation devices by linear regression analysis between the 96HAFD and tube (R² = 0.9904), 96HAFD and flask (R² = 0.9904). At last, the 96HAFD was verified more efficient and reliable in fast screening single algal colony strains when compared with flask and tube air-flowing cultivation devices, because 96HAFD was confirmed have better performances in adaptation to the aeration cultivation circumstance and growing faster in a short period, in addition, 96HAFD had the less percentage of water loss per day (0.11%) than that of flask aeration device (2-3%) and tube aeration device (5-6.5%), which reduced negative effect caused by the water evaporation in the aeration cultivation to make the whole growing system more stable.

Microalgae as a solution of third world energy crisis for biofuels production from wastewater toward carbon neutrality: An updated review

The boost of the greenhouse gases (GHGs, largely carbon dioxide - CO₂) emissions owing to anthropogenic activity is one of the biggest global threats. Bio-CO₂ emission reduction has received more and more attention as an environmentally sustainable approach. Microalgae are very popular in this regard because of excellent speed of growth, low costs of production, and resistance to extreme environments. Besides, most microalgae can undergo photosynthesis, where the CO₂ and solar energy can be converted into sugar, and subsequently become biomass, providing a renewable and promising biofuel strategy with a few outstanding benefits. This review focuses on presenting CO₂ sequestration by microalgae towards wastewater treatment and biodiesel production. First, the CO₂ fixation mechanism by microalgae viz., sequestration and assimilation of CO₂ in green microalgae as well as cyanobacteria were introduced. Besides, factors affecting CO₂ sequestration in microalgae, containing microalgae species and cultivation conditions, such as light condition, photobioreactor, configuration, pH, CO₂ concentration, temperature, and medium composition, were then comprehensively discussed. Special attention was given to the production of biodiesel as third-generation biofuel from various wastewater (CO₂ biofixation), including processing steps of biodiesel production by microalgae, biodiesel production from wastewater, and improved methods. Furthermore, current life cycle assessment (LCA) and techno-economic analysis (TEA) used in biodiesel production were discussed. Finally, the research challenges and specific prospects were considered. Taken together, this review provides useful and updated information to facilitate the development of microalgal "green chemistry" and "environmental sustainability".

Linkage between bacterial community-mediated hydrogen peroxide detoxification and the growth of Microcystis aeruginosa

Microcystis aeruginosa, an important cyanobloom-forming cyanobacterium, is sensitive to the high light intensity and consequent oxidative stress. Based on our genomic and transcriptomic analyses of H₂O₂-treated cells, many genes involved in photosynthesis, Calvin cycle, and microcystin synthesis were downregulated, whereas several toxin-antitoxin genes, DNA repair genes, and H₂O₂-defense systems such as peroxiredoxins and glutathione synthesis were upregulated. Axenic M. aeruginosa was then co-cultured with synthetic bacterial communities collected from 15 different freshwater samples with exhibiting different degrees of H₂O₂-production and catalase activities. Our analyses indicated that H₂O₂-resistant bacterial communities favored the growth and photosynthetic activity of M. aeruginosa cells under either H₂O₂ treatment or high light conditions. Nanopore-based bacterial community analyses indicated that these growth-promoting effects were likely attributable to a high proportion of Alphaproteobacteria (e.g., Brevundimonas and Ochrobactrum species), which protected M. aeruginosa cells from H₂O₂ toxicity. Further, these bacterial communities exhibited higher catalase activity levels and faster O₂ production rates upon H₂O₂ detoxification. Taken together, our findings newly suggest that the occurrence of catalase-less M. aeruginosa blooms is largely influenced by the surrounding microbiota during high light and organic-rich conditions.

Nanocosm: a well plate photobioreactor for environmental and biotechnological studies

Phytoplankton are key primary producers at the bottom of the aquatic food chain. They are a highly diverse group of organisms essential for the functioning of our ecosystems and because of their characteristics, their biomass is considered for various commercial applications. A full appreciation of their abundance, diversity and potential is only feasible by using systems that enable simultaneous testing of strains and/or variables in a fast and easy way. A major bottleneck is the lack of a cost-effective method with the capacity for complex experimental set-ups that enable fast and reproducible screening and analysis. In this study, we present nanocosm, a versatile LED-based micro-scale photobioreactor (PBR) that allows simultaneous testing of multiple variables such as temperature and light within the same plate. Every well can be independently controlled for intensity, temporal variation and light type (RGB, white, UV). We show that our systems guarantee homogeneous conditions because of controlled temperature and evaporation and adjustments for light crosstalk. By ensuring controlled environmental conditions the nanocosm is suitable for running factorial experimental designs where each well can be used as an independent micro-PBR. To validate culture performances, we assess well-to-well reproducibility and our results show minimal well-to-well variability for all the conditions tested. Possible modes of operation and application are discussed together with future development of the system.

Microfluidic and mathematical modeling of aquatic microbial communities

Aquatic microbial communities contribute fundamentally to biogeochemical transformations in natural ecosystems, and disruption of these communities can lead to ecological disasters such as harmful algal blooms. Microbial communities are highly dynamic, and their composition and function are tightly controlled by the biophysical (e.g., light, fluid flow, and temperature) and biochemical (e.g., chemical gradients and cell concentration) parameters of the surrounding environment. Due to the large number of environmental factors involved, a systematic understanding of the microbial community-environment interactions is lacking. In this article, we show that microfluidic platforms present a unique opportunity to recreate well-defined environmental factors in a laboratory setting in a high throughput way, enabling quantitative studies of microbial communities that are amenable to theoretical modeling. The focus of this article is on aquatic microbial communities, but the microfluidic and mathematical models discussed here can be readily applied to investigate other microbiomes.

High-Throughput In Vitro Screening of Changed Algal Community Structure Using the PhotoBiobox

In a previous study, the sequential optimization and regulation of environmental parameters using the PhotoBiobox were demonstrated with high-throughput screening tests. In this study, we estimated changes in the biovolume-based composition of a polyculture built in vitro and composed of three algal strains: Chlorella sp., Scenedesmus sp., and Parachlorella sp. We performed this work using the PhotoBiobox under different temperatures (10-36°C) and light intensities (50-700 μmol/m^-2/s^-1) in air and in 5% CO₂. In 5% CO₂, Chlorella sp. exhibited better adaptation to high temperatures than in air conditions. Pearson's correlation analysis showed that the composition of Parachlorella sp. was highly related to temperature whereas Chlorella sp. and Scenedesmus sp. showed negative correlations in both air and 5% CO₂. Furthermore, light intensity slightly affected the composition of Scenedesmus sp., whereas no significant effect was observed in other species. Based on these results, it is speculated that temperature is an important factor in influencing changes in algal polyculture community structure (PCS). These results further confirm that the PhotoBiobox is a convenient and available tool for performance of lab-scale experiments on PCS changes. The application of the PhotoBiobox in PCS studies will provide new insight into polyculture-based ecology.

Isolation, Identification, and Biochemical Characteristics of a Cold-Tolerant Chlorella vulgaris KNUA007 Isolated from King George Island, Antarctica

A cold-tolerant unicellular green alga was isolated from a meltwater stream on King George Island, Antarctica. Morphological, molecular, and biochemical analyses revealed that the isolate belonged to the species Chlorella vulgaris. We tentatively named this algal strain C.vulgaris KNUA007 and investigated its growth and lipid composition. We found that the strain was able to thrive in a wide range of temperatures, from 5 to 30 °C; however, it did not survive at 35 °C. Ultimate analysis confirmed high gross calorific values only at low temperatures (10 °C), with comparable values to land plants for biomass fuel. Gas chromatography/mass spectrometry analysis revealed that the isolate was rich in nutritionally important polyunsaturated fatty acids (PUFAs). The major fatty acid components were hexadecatrienoic acid (C16:3 ω3, 17.31%), linoleic acid (C18:2 ω6, 8.52%), and α-linolenic acid (C18:3 ω3, 43.35%) at 10 °C. The microalga was tolerant to low temperatures, making it an attractive candidate for the production of biochemicals under cold weather conditions. Therefore, this Antarctic microalga may have potential as an alternative to fish and/or plant oils as a source of omega-3 PUFA. The temperature tolerance and composition of C.vulgaris KNUA007 also make the isolate desirable for commercial applications in the pharmaceutical industry.

Seasonal dynamics of the bacterial communities associated with cyanobacterial blooms in the Han River

DNA-based analyses of bacterial communities were performed to identify the bacteria co-occurring with cyanobacterial blooms in samples collected at a single site over 2 years. Microcystis aeruginosa was the most predominant species (81% in 2018, and 94% in 2019) within the phylum Cyanobacteria, and microcystins were detected during all cyanobacterial blooms. The stereo microscope and scanning electron microscope observations showed bacterial associations on and around the aggregated M. aeruginosa cells. Culture-independent analyses of filtered bacterial communities showed that the Flavobacterium species in phylum Bacteroidetes (19%) was dominant in the cyanobacterial phycosphere, followed by the Limnohabitans species in Betaproteobacteria (11%). Using principal component analysis, major bacterial genus, including Microcystis and Flavobacterium species, were clustered during cyanobacterial blooms in both years. To identify key bacterial species that develop long-term symbiosis with M. aeruginosa, another culture-independent analysis was performed after the environmental sample had been serially subcultured for 1 year. Interestingly, Brevundimonas (14%) was the most dominant species, followed by Porphyrobacter (7%) and Rhodobacter (3.5%) within the Alphaproteobacteria. Screening of 100 colonies from cyanobacterial bloom samples revealed that the majority of culturable bacteria belonged to Gammaproteobacteria (28%) and Betaproteobacteria (57%), including Pseudomonas, Curvibacter, and Paucibacter species. Several isolates of Brevundimonas, Curvibacter, and Pseudomonas species could promote the growth of axenic M. aeruginosa PCC7806. The sensitivity of M. aeruginosa PCC7806 cells to different environmental conditions was monitored in bacteria-free pristine freshwater, indicating that nitrogen addition promotes the growth of M. aeruginosa.

Characterization of Chlorella sorokiniana and Chlorella vulgaris fatty acid components under a wide range of light intensity and growth temperature for their use as biological resources

This study aims to characterize the potential of three strains of microalgal species (Chlorella sorokiniana KNUA114 and KNUA122; C. vulgaris KNUA104) for use as feedstock, based on their fatty acid compositions. Each strain was molecularly identified using four marker genes (ITS, SSU, rbcL, and tufA) and phylogenetically characterized. C. sorokiniana and C. vulgaris collected from Ulleung Island, South Korea, were homologous with other known species groups. Samples' fatty acid components were measured using GC/MS analysis in growth temperatures of 10 °C, 25 °C, and 35 °C. The growth rate of C. sorokiniana strains was higher than that of C. vulgaris under high-temperature conditions, confirming the potential industrial applicability of the former as feedstock material. Additionally, saturated fatty acid contents and productivities increased as biological resources of the C. sorokiniana strains were higher than those of C. vulgaris under high light intensity and temperature conditions. These results suggest that the fatty acid components of C. sorokiniana strains may potentially be used as biological resources (e.g., feedstock).

Culture-independent and culture-dependent analyses of the bacterial community in the phycosphere of cyanobloom-forming Microcystis aeruginosa

Confocal and scanning electron microscopic observations have previously shown the strong bacterial association of Microcystis aeruginosa cells on their surfaces. DNA-based analyses of the associated bacterial communities were carried out using two M. aeruginosa strains grown in the laboratory and eight newly collected cyanobacterial bloom samples. M. aeruginosa was the most predominant species (66–100%) within the phylum Cyanobacteria. Rhizobium, Hydrogenophaga and Brevundimonas species were commonly found, and Flavobacterium species were present in all the cyanobacterial bloom samples. In total, 396 colonies from various samples were screened, revealing that most culturable bacteria belonged to the class Alphaproteobacteria (19%) including Rhizobium, Brevundimonas, and Porphyrobacter species. The genetic variation among the M. aeruginosa strains and different habitat conditions may have led to the presence of distinct bacterial populations among the tested samples. Among all the tested seven culturable isolates, Rhizobium sp. MK23 showed the best growth-promotion effect on the axenic M. aeruginosa strains. H₂O₂ was observed to be produced during the growth of M. aeruginosa PCC7806 under light conditions, this strain was more resistant to H₂O₂ when associated with Rhizobium sp. MK23. Our data suggested that Rhizobium species along with other associated bacteria might help the growth of M. aeruginosa by decomposing H₂O₂ under the aerobic growing conditions.

Optimization of heterotrophic cultivation of Chlorella sp. HS2 using screening, statistical assessment, and validation

The heterotrophic cultivation of microalgae has a number of notable advantages, which include allowing high culture density levels as well as enabling the production of biomass in consistent and predictable quantities. In this study, the full potential of Chlorella sp. HS2 is explored through optimization of the parameters for its heterotrophic cultivation. First, carbon and nitrogen sources were screened in PhotobioBox. Initial screening using the Plackett-Burman design (PBD) was then adopted and the concentrations of the major nutrients (glucose, sodium nitrate, and dipotassium phosphate) were optimized via response surface methodology (RSM) with a central composite design (CCD). Upon validation of the model via flask-scale cultivation, the optimized BG11 medium was found to result in a three-fold improvement in biomass amounts, from 5.85 to 18.13 g/L, in comparison to a non-optimized BG11 medium containing 72 g/L glucose. Scaling up the cultivation to a 5-L fermenter resulted in a greatly improved biomass concentration of 35.3 g/L owing to more efficient oxygenation of the culture. In addition, phosphorus feeding fermentation was employed in an effort to address early depletion of phosphate, and a maximum biomass concentration of 42.95 g/L was achieved, with biomass productivity of 5.37 g/L/D.

Laboratory-scale photobiotechnology-current trends and future perspectives

Phototrophic bioprocesses are a promising puzzle piece in future bioeconomy concepts but yet mostly fail for economic reasons. Besides other aspects, this is mainly attributed to the omnipresent issue of optimal light supply impeding scale-up and -down of phototrophic processes according to classic established concepts. This MiniReview examines two current trends in photobiotechnology, namely microscale cultivation and modeling and simulation. Microphotobioreactors are a valuable and promising trend with microfluidic chips and microtiter plates as predominant design concepts. Providing idealized conditions, chip systems are preferably to be used for acquiring physiological data of microalgae while microtiter plate systems are more appropriate for process parameter and medium screenings. However, these systems are far from series technology and significant improvements especially regarding flexible light supply remain crucial. Whereas microscale is less addressed by modeling and simulation so far, benchtop photobioreactor design and operation have successfully been studied using such tools. This particularly includes quantitative model-assisted understanding of mixing, mass transfer, light dispersion and particle tracing as well as their relevance for microalgal performance. The ultimate goal will be to combine physiological data from microphotobioreactors with hybrid models to integrate metabolism and reactor simulation in order to facilitate knowledge-based scale transfer of phototrophic bioprocesses.

Increased biomass and lipid production of Ettlia sp. YC001 by optimized C and N sources in heterotrophic culture

The culture conditions and media composition for the heterotrophic culture of an axenic strain of Ettlia sp. YC001 were firstly optimized using the Plackett-Burman design (PBD) and response surface methodology (RSM). The strain successfully showed higher productivity in the basal media without any light illumination at 32.2 to 33.3 °C. The PBD results showed that the most effective components for biomass productivity of Ettlia sp. were fructose and yeast extract for sources of C and N, respectively. The RSM results showed an optimal level of 72.2 g/L for fructose and 21.5 g/L for yeast extract, resulting in 46.1 g/L biomass with a lipid content of 13.8% over a course of 9 days. Using a 5 L scaled-up fermentation system for 6 days, the production of biomass and lipids was 7.21 g/L/day and 1.18 g/L/day, respectively. Consequently, heterotrophic cultivation of Ettlia sp. YC001 provided much higher production of biomass and lipids than those of autotrophic cultivation. As further research, the use of substitute substrates instead of fructose and yeast extract should be developed to reduce production costs.

Pulsatile illumination for photobiology and optogenetics

Living organisms exhibit a wide range of intrinsic adaptive responses to incident light. Likewise, in optogenetics, biological systems are tailored to initiate predetermined cellular processes upon light exposure. As genetically encoded, light-gated actuators, sensory photoreceptors are at the heart of these responses in both the natural and engineered scenarios. Upon light absorption, photoreceptors enter a series of generally rapid photochemical reactions leading to population of the light-adapted signaling state of the receptor. Notably, this state persists for a while before thermally reverting to the original dark-adapted resting state. As a corollary, the inactivation of photosensitive biological circuits upon light withdrawal can exhibit substantial inertia. Intermittent illumination of suitable pulse frequency can hence maintain the photoreceptor in its light-adapted state while greatly reducing overall light dose, thereby mitigating adverse side effects. Moreover, several photoreceptor systems may be actuated sequentially with a single light color if they sufficiently differ in their inactivation kinetics. Here, we detail the construction of programmable illumination devices for the rapid and parallelized testing of biological responses to diverse lighting regimes. As the technology is based on open electronics and readily available, inexpensive components, it can be adopted by most laboratories at moderate expenditure. As we exemplify for two use cases, the programmable devices enable the facile interrogation of diverse illumination paradigms and their application in optogenetics and photobiology.

An LED-based multi-actinic illumination system for the high throughput study of photosynthetic light responses

The responses of photosynthetic organisms to light stress are of interest for both fundamental and applied research. Functional traits related to the photoinhibition, the light-induced loss of photosynthetic efficiency, are particularly interesting as this process is a key limiting factor of photosynthetic productivity in algae and plants. The quantitative characterization of light responses is often time-consuming and calls for cost-effective high throughput approaches that enable the fast screening of multiple samples. Here we present a novel illumination system based on the concept of ‘multi-actinic imaging’ of in vivo chlorophyll fluorescence. The system is based on the combination of an array of individually addressable low power RGBW LEDs and custom-designed well plates, allowing for the independent illumination of 64 samples through the digital manipulation of both exposure duration and light intensity. The illumination system is inexpensive and easily fabricated, based on open source electronics, off-the-shelf components, and 3D-printed parts, and is optimized for imaging of chlorophyll fluorescence. The high-throughput potential of the system is illustrated by assessing the functional diversity in light responses of marine macroalgal species, through the fast and simultaneous determination of kinetic parameters characterizing the response to light stress of multiple samples. Although the presented illumination system was primarily designed for the measurement of phenotypic traits related to photosynthetic activity and photoinhibition, it can be potentially used for a number of alternative applications, including the measurement of chloroplast phototaxis and action spectra, or as the basis for microphotobioreactors.

"Do It Yourself" Microbial Cultivation Techniques for Synthetic and Systems Biology: Cheap, Fun, and Flexible

With the emergence of inexpensive 3D printing technology, open-source platforms for electronic prototyping and single-board computers, "Do it Yourself" (DIY) approaches to the cultivation of microbial cultures are becoming more feasible, user-friendly, and thus wider spread. In this perspective, we survey some of these approaches, as well as add-on solutions to commercial instruments for synthetic and system biology applications. We discuss different cultivation designs, including capabilities and limitations. Our intention is to encourage the reader to consider the DIY solutions. Overall, custom cultivation devices offer controlled growth environments with in-line monitoring of, for example, optical density, fluorescence, pH, and dissolved oxygen, all at affordable prices. Moreover, they offer a great degree of flexibility for different applications and requirements and are fun to design and construct. We include several illustrative examples, such as gaining optogenetic control and adaptive laboratory evolution experiments.

Bicarbonate-based cultivation of Dunaliella salina for enhancing carbon utilization efficiency

In this study, bicarbonate was proposed as an alternative carbon source to overcome exceedingly low CO₂ fixation efficiency of conventional microalgae cultivation system. 5gL^-1 of sodium bicarbonate was found to well support the growth of Dunaliella salina, showing 2.84-fold higher specific growth rate than a bicarbonate-free control. This bicarbonate-fed cultivation also could yield biomass productivity similar to that of CO₂-based system as long as pH was controlled. While the supplied CO₂, because of its being a gas, was mostly lost and only 3.59% of it was used for biomass synthesis, bicarbonate was effectively incorporated into the biomass with 91.40% of carbon utilization efficiency. This study showed that the bicarbonate-based microalgae cultivation is indeed possible, and can even become a truly environment-friendly and workable approach, provided that a CO₂ mineralization technology is concomitantly established.

Microalgal diversity fosters stable biomass productivity in open ponds treating wastewater

It is established that biodiversity determines productivity of natural ecosystems globally. We have proved that abiotic factors influenced biomass productivity in engineered ecosystems i.e. high rate algal ponds (HRAPs), previously. This study demonstrates that biotic factors, particularly microalgal diversity, play an essential role in maintaining stable biomass productivity in HRAP treating municipal wastewater by mutualistic adaptation to environmental factors. The current study examined data from the second year of a two-year study on HRAP treating municipal wastewater. Microalgal diversity, wastewater characteristics, treatment efficiency and several environmental and meteorological factors were documented. Multivariate statistical analyses reveal that microalgae in uncontrolled HRAPs adapt to adverse environmental conditions by fostering diversity. Subsequently, five dominant microalgal strains by biovolume were isolated, enriched, and optimum conditions for high biomass productivity were ascertained. These laboratory experiments revealed that different microalgal strains dominate in different conditions and a consortium of these diverse taxa help in sustaining the algae community from environmental and predatory pressures. Diversity, niche or seasonal partitioning and mutualistic growth are pertinent in microalgal cultivation or wastewater treatment. Therefore, enrichment of selective species would deprive the collective adaptive ability of the consortium and encourage system vulnerability especially in wastewater treatment.

A framework for accelerated phototrophic bioprocess development: integration of parallelized microscale cultivation, laboratory automation and Kriging-assisted experimental design

BACKGROUND

Even though microalgae-derived biodiesel has regained interest within the last decade, industrial production is still challenging for economic reasons. Besides reactor design, as well as value chain and strain engineering, laborious and slow early-stage parameter optimization represents a major drawback.

RESULTS

The present study introduces a framework for the accelerated development of phototrophic bioprocesses. A state-of-the-art micro-photobioreactor supported by a liquid-handling robot for automated medium preparation and product quantification was used. To take full advantage of the technology's experimental capacity, Kriging-assisted experimental design was integrated to enable highly efficient execution of screening applications. The resulting platform was used for medium optimization of a lipid production process using Chlorella vulgaris toward maximum volumetric productivity. Within only four experimental rounds, lipid production was increased approximately threefold to 212 ± 11 mg L^-1 d^-1. Besides nitrogen availability as a key parameter, magnesium, calcium and various trace elements were shown to be of crucial importance. Here, synergistic multi-parameter interactions as revealed by the experimental design introduced significant further optimization potential.

CONCLUSIONS

The integration of parallelized microscale cultivation, laboratory automation and Kriging-assisted experimental design proved to be a fruitful tool for the accelerated development of phototrophic bioprocesses. By means of the proposed technology, the targeted optimization task was conducted in a very timely and material-efficient manner.

Light-induced gene expression with photocaged IPTG for induction profiling in a high-throughput screening system

BACKGROUND

Inducible expression systems are frequently used for the production of heterologous proteins. Achieving maximum product concentrations requires induction profiling, namely the optimization of induction time and inducer concentration. However, the respective experiments can be very laborious and time-consuming. In this work, a new approach for induction profiling is presented where induction in a microtiter plate based cultivation system (BioLector) is achieved by light using photocaged isopropyl β-D-1-thiogalactopyranoside (cIPTG).

RESULTS

A flavin mononucleotide-based fluorescent reporter protein (FbFP) was expressed using a T7-RNA-polymerase dependent E. coli expression system which required IPTG as inducer. High power UV-A irradiation was directed into a microtiter plate by light-emitting diodes placed above each well of a 48-well plate. Upon UV irradiation, IPTG is released (uncaged) and induces product formation. IPTG uncaging, formation of the fluorescent reporter protein and biomass growth were monitored simultaneously in up to four 48-well microtiter plates in parallel with an in-house constructed BioLector screening system. The amount of released IPTG can be gradually and individually controlled for each well by duration of UV-A exposure, irradiance and concentration of photocaged IPTG added at the start of the cultivation. A comparison of experiments with either optical or conventional IPTG induction shows that product formation and growth are equivalent. Detailed induction profiles revealed that for the strain and conditions used maximum product formation is reached for very early induction times and with just 6-8 s of UV-A irradiation or 60-80 µM IPTG.

CONCLUSIONS

Optical induction and online monitoring were successfully combined in a high-throughput screening system and the effect of optical induction with photocaged IPTG was shown to be equivalent to conventional induction with IPTG. In contrast to conventional induction, optical induction is less costly to parallelize, easy to automate, non-invasive and without risk of contamination. Therefore, light-induced gene expression with photocaged IPTG is a highly advantageous method for the efficient optimization of heterologous protein production and has the potential to replace conventional induction with IPTG.