Geobacter-dominated biofilms used as amperometric BOD sensors

Microbial Biofilms: Features of Formation and Potential for Use in Bioelectrochemical Devices

Microbial biofilms present one of the most widespread forms of life on Earth. The formation of microbial communities on various surfaces presents a major challenge in a variety of fields, including medicine, the food industry, shipping, etc. At the same time, this process can also be used for the benefit of humans-in bioremediation, wastewater treatment, and various biotechnological processes. The main direction of using electroactive microbial biofilms is their incorporation into the composition of biosensor and biofuel cells This review examines the fundamental knowledge acquired about the structure and formation of biofilms, the properties they have when used in bioelectrochemical devices, and the characteristics of the formation of these structures on different surfaces. Special attention is given to the potential of applying the latest advances in genetic engineering in order to improve the performance of microbial biofilm-based devices and to regulate the processes that take place within them. Finally, we highlight possible ways of dealing with the drawbacks of using biofilms in the creation of highly efficient biosensors and biofuel cells.

Microbial Biosensors for Rapid Determination of Biochemical Oxygen Demand: Approaches, Tendencies and Development Prospects

One of the main indices of the quality of water is the biochemical oxygen demand (BOD). A little over 40 years have passed since the practical application of the first microbial sensor for the determination of BOD, presented by the Japanese professor Isao Karube. This time span has brought new knowledge to and practical developments in the use of a wide range of microbial cells based on BOD biosensors. At present, this field of biotechnology is becoming an independent discipline. The traditional BOD analysis (BOD₅) has not changed over many years; it takes no less than 5 days to carry out. Microbial biosensors can be used as an alternative technique for assessing the BOD attract attention because they can reduce hundredfold the time required to measure it. The review examines the experience of the creation and practical application of BOD biosensors accumulated by the international community. Special attention is paid to the use of multiple cell immobilization methods, signal registration techniques, mediators and cell consortia contained in the bioreceptor. We consider the use of nanomaterials in the modification of analytical devices developed for BOD evaluation and discuss the prospects of developing new practically important biosensor models.

A Review of Recent Advances in Microbial Fuel Cells: Preparation, Operation, and Application

The microbial fuel cell has been considered a promising alternative to traditional fossil energy. It has great potential in energy production, waste management, and biomass valorization. However, it has several technical issues, such as low power generation efficiency and operational stability. These issues limit the scale-up and commercialization of MFC systems. This review presents the latest progress in microbial community selection and genetic engineering techniques for enhancing microbial electricity production. The summary of substrate selection covers defined substrates and some inexpensive complex substrates, such as wastewater and lignocellulosic biomass materials. In addition, it also includes electrode modification, electron transfer mediator selection, and optimization of operating conditions. The applications of MFC systems introduced in this review involve wastewater treatment, production of value-added products, and biosensors. This review focuses on the crucial process of microbial fuel cells from preparation to application and provides an outlook for their future development.

Electroactive Biofilms of Activated Sludge Microorganisms on a Nanostructured Surface as the Basis for a Highly Sensitive Biochemical Oxygen Demand Biosensor

The possibility of the developing a biochemical oxygen demand (BOD) biosensor based on electroactive biofilms of activated sludge grown on the surface of a graphite-paste electrode modified with carbon nanotubes was studied. A complex of microscopic methods controlled biofilm formation: optical microscopy with phase contrast, scanning electron microscopy, and laser confocal microscopy. The features of charge transfer in the obtained electroactive biofilms were studied using the methods of cyclic voltammetry and electrochemical impedance spectroscopy. The rate constant of the interaction of microorganisms with the extracellular electron carrier (0.79 ± 0.03 dm³(g s)^-1) and the heterogeneous rate constant of electron transfer (0.34 ± 0.02 cm s^-1) were determined using the cyclic voltammetry method. These results revealed that the modification of the carbon nanotubes' (CNT) electrode surface makes it possible to create electroactive biofilms. An analysis of the metrological and analytical characteristics of the created biosensors showed that the lower limit of the biosensor based on an electroactive biofilm of activated sludge is 0.41 mgO₂/dm³, which makes it possible to analyze almost any water sample. Analysis of 12 surface water samples showed a high correlation (R² = 0.99) with the results of the standard method for determining biochemical oxygen demand.

Review on microbial fuel cells applications, developments and costs

The microbial fuel cell (MFC) technology has attracted significant attention in the last years due to its potential to recover energy in a wastewater treatment. The idea of using an MFC in industry is very attractive as the organic wastes can be converted into energy, reducing the waste disposal costs and the energy needs while increasing the company profit. However, taking aside these promising prospects, the attempts to apply MFCs in large-scale have not been succeeded so far since their lower performance and high costs remains challenging. This review intends to present the main applications of the MFC systems and its developments, particularly the advances on configuration and operating conditions. The diagnostic techniques used to evaluate the MFC performance as well as the different modeling approaches are described. Towards the introduction of the MFC in the market, a cost analysis is also included. The development of low-cost materials and more efficient systems, with high higher power outputs and durability, are crucial towards the application of MFCs in industrial/large scale. This work is a helpful tool for discovering new operation and design regimes.

Microbial fuel cell soft sensor for real-time toxicity detection and monitoring

Real-time toxicity detection and monitoring using a microbial fuel cell (MFC) is often based on observing current or voltage changes. Other methods of obtaining more information on the internal state of the MFC, such as electrochemical impedance spectroscopy (EIS), are invasive, disruptive, time consuming, and may affect long-term MFC performance. This study proposes a soft sensor approach as a non-invasive real-time method for evaluating the internal state of an MFC biosensor during toxicity monitoring. The proposed soft sensor approach is based on estimating the equivalent circuit model (ECM) parameters in real time. A flow-through MFC biosensor was operated at several combinations of carbon source (acetate) and toxicant (copper) concentrations. The ECM parameters, such as internal resistance, capacitance, and open-circuit voltage, were estimated in real time using a numerical parameter estimation procedure. The soft sensor approach proved to be an adequate replacement for EIS measurements in quantifying changes in the biosensor internal parameters. The approach also provided additional information, which could lead to earlier detection of the toxicity onset.

Microbial fuel cell biosensor for the determination of biochemical oxygen demand of wastewater samples containing readily and slowly biodegradable organics

OBJECTIVES

Single-chamber air cathode microbial fuel cells (MFCs) were applied as biosensors for biochemical oxygen demand (BOD) measurement of real wastewaters with considerable suspended and/or slowly biodegradable organic content.

RESULTS

The measurement method consists of batch sample injection, continuous measurement of cell voltage and calculation of total charge (Q) gained during the biodegradation of organic content. Diverse samples were analyzed: acetate and peptone samples containing only soluble readily biodegradable substrates; corn starch and milk samples with suspended and colloidal organics; real domestic and brewery wastewaters. Linear regression fitted to the Q vs. BOD₅ measurement points of the real wastewaters provided high (> 0.985) R² values. Time requirement of the measurement varied from 1 to 4 days, depending on the composition of the sample.

CONCLUSIONS

Relative error of BOD measured in the MFCs comparing with BOD₅ was less than 10%, thus the method might be a good basis for the development of on-site automatic BOD sensors for real wastewater samples.

Biosensing capabilities of bioelectrochemical systems towards sustainable water streams: Technological implications and future prospects

Bioelectrochemical systems (BESs) have been intensively investigated over the last decade owing to its wide-scale environmentally friendly applications, among which wastewater treatment, power generation and environmental monitoring for pollutants are prominent. Different variants of BES such as microbial fuel cell, microbial electrolysis cell, microbial desalination cell, enzymatic fuel cell, microbial solar cell, have been studied. These microbial bioelectrocatalytic systems have clear advantages over the existing analytical techniques for sustainable on-site application in wide environmental conditions with minimum human intervention, making the technology irrevocable and economically feasible. The key challenges to establish this technology are to achieve stable and efficient interaction between the electrode surface and microorganisms, reduction of time for start-up and toxic-shock recovery, sensitivity improvement in real-time conditions, device miniaturization and its long-term economically feasible commercial application. This review article summarizes the recent technical progress regarding bio-electrocatalytic processes and the implementation of BESs as a biosensor for determining various compositional characteristics of water and wastewater.

RNA Stable Isotope Probing of Potential Feammox Population in Paddy Soil

Anaerobic ammonium oxidation coupled to iron reduction (Feammox) is a recently discovered pathway contributing to nitrogen loss in various ecosystems such as paddy soils and sediments. However, little is known about the microbes driving Feammox in an agricultural ecosystem. Here, we demonstrated the occurrence of Feammox in paddy soils of Southern China using a ¹⁵N isotopic tracing technique, and examined the microbial communities associated with Feammox using RNA based stable isotope probing (RNA-SIP) combined with Illumina sequencing. Feammox was detected in all collected soils with direct N₂ production as the dominant Feammox pathway. It was estimated that approximately 6.91% of the applied nitrogen fertilizers were lost through Feammox in the paddy soils. RNA-SIP results showed that the composition of enriched active microbial communities were dependent on soil properties, especially the soil pH and grain size. Geobacter were enriched in most soils across various properties. The abundance of enriched GOUTA19 were significantly higher in soils with low pH than those in soils with medium pH and high pH, and the relative abundance of active Nitrososphaeraceae and Pseudomonas only increased in soils with medium and high pH during 4-day of incubation. These results suggested Feammox is a ubiquitous and important process for N loss. Geobacter, GOUTA19, Nitrososphaeraceae and Pseudomonas were active during the incubation that favored Feammox and the growth of Feammox microbes, suggesting these microbes were potentially associated with Feammox in natural agricultural soils.

Electroactive Biofilms for Sensing: Reflections and Perspectives

Microbial electrochemistry has from the onset been recognized for its sensing potential due to the microbial ability to enhance signals through metabolic cascades, its relative selectivity toward substrates, and the higher stability conferred by the microbial ability to self-replicate. The greatest challenge has been to achieve stable and efficient transduction between a microorganism and an electrode surface. Over the past decades, a new kind of microbial architecture has been observed to spontaneously develop on polarized electrodes: the electroactive biofilm (EAB). The EAB conducts electrons over long distances and performs quasi-reversible electron transfer on conventional electrode surfaces. It also possesses self-regenerative properties. In only a few years, EABs have inspired considerable research interest for use as biosensors for environmental or bioprocess monitoring. Multiple challenges still need to be overcome before implementation at larger scale of this new kind of biosensors can be realized. This perspective first introduces the specific characteristics of the EAB with respect to other electrochemical biosensors. It summarizes the sensing applications currently proposed for EABs, stresses their limitations, and suggests strategies toward potential solutions. Conceptual prospects to engineer EABs for sensing purposes are also discussed.

Microbiome involved in microbial electrochemical systems (MESs): A review

Microbial electrochemical systems (MESs) are an attracting technology for the disposal of wastewater treatment and simultaneous energy production. In MESs, at the anode microorganisms through the catalytic activity generates electrons that can be converted into electricity or other valuable chemical compounds. Microorganisms those having ability to donate and accept electrons to and from anode and cathode electrodes, respectively are recognized as 'exoelectrogens'. In the MESs, it renders an important function for its performance. In the present mini-review, we have discussed the role of microbiome including pure culture, enriched culture and mixed culture in different BESs application. The effects of operational and biological factors on microbiome development have been discussed. Further discussion about the molecular techniques for the evaluation of microbial community analysis is addressed. In addition different electrochemical techniques for extracellular electron transfer (EET) mechanism of electroactive biofilms have been discussed. This review highlights the importance of microbiome in the development of MESs, effective operational factors for exo-electrogens activities as well their key challenges and future technological aspects are also briefly discussed.