Production and characterisation of exopolymer from Rhodococcus opacus

Efficacy of exopolysaccharide in dye-laden wastewater treatment: A comprehensive review

The discharge of dye-laden wastewater into the water streams causes severe water and soil pollution, which poses a global threat to aquatic ecosystems and humans. A diverse array of microorganisms such as bacteria, fungi, and algae produce exopolysaccharides (EPS) of different compositions and exhibit great bioflocculation potency to sustainably eradicate dyes from water bodies. Nanomodified chemical composites of EPS enable their recyclability during dye-laden wastewater treatment. Nevertheless, the selection of potent EPS-producing strains and physiological parameters of microbial growth and the remediation process could influence the removal efficiency of EPS. This review will intrinsically discuss the fundamental importance of EPS from diverse microbial origins and their nanomodified chemical composites, the mechanisms in EPS-mediated bioremediation of dyes, and the parametric influences on EPS-mediated dye removal through sorption/bioflocculation. This review will pave the way for designing and adopting futuristic green and sustainable EPS-based bioremediation strategies for dye-laden wastewater in situ and ex situ.

Perspectives on cultivation and harvesting technologies of microalgae, towards environmental sustainability and life cycle analysis

The development of algae is seen as a potential and ecologically sound approach to address the increasing demands in multiple sectors. However, successful implementation of processes is highly dependent on effective growing and harvesting methods. The present study provides a complete examination of contemporary techniques employed in the production and harvesting of algae, with a particular emphasis on their sustainability. The review begins by examining several culture strategies, encompassing open ponds, closed photobioreactors, and raceway ponds. The analysis of each method is conducted in a systematic manner, with a particular focus on highlighting their advantages, limitations, and potential for expansion. This approach ensures that the conversation is in line with the objectives of sustainability. Moreover, this study explores essential elements of algae harvesting, including the processes of cell separation, dewatering, and biomass extraction. Traditional methods such as centrifugation, filtration, and sedimentation are examined in conjunction with novel, environmentally concerned strategies including flocculation, electro-coagulation, and membrane filtration. It evaluates the impacts on the environment that are caused by the cultivation process, including the usage of water and land, the use of energy, the production of carbon dioxide, and the runoff of nutrients. Furthermore, this study presents a thorough examination of the current body of research pertaining to Life Cycle Analysis (LCA) studies, presenting a perspective that emphasizes sustainability in the context of algae harvesting systems. In conclusion, the analysis ends up with an examination ahead at potential areas for future study in the cultivation and harvesting of algae. This review is an essential guide for scientists, policymakers, and industry experts associated with the advancement and implementation of algae-based technologies.

Physicochemical factors affecting flocculating properties of the proteoglycan isolated from Rhodococcus opacus

The water-soluble fraction of proteoglycan R_S-89 isolated from the Rhodococcus opacus FCL89 and composed of 64.6% polysaccharide and 9.44% protein has been studied as regards its flocculating activity. The R_S-89 polysaccharide component includes mannose, galactose and glucose at the molar ratio of 2.7: 1.3: 1. The basic factors affecting flocculating activity of the R_S-89 have been established. Additionally, the kinetics of kaolin sedimentation without and with the bioflocculant was investigated. The presence of divalent metal ions had a positive effect on the flocculating activity of the R_S-89. The addition of Ca²⁺ increased the R_S-89 flocculating activity in comparison to the other studied metals. It was proved that the proteoglycan R_S-89 achieved the highest flocculating activity at the concentration equal to 2 mg/L and in the presence of 10 mmol/L of Ca²⁺. The zeta potential values are less negative when there is an interaction between the kaolin particles and metal ions without the R_S-89 in the tested systems. Therefore, the proposed mechanism to describe the proteoglycan interaction with kaolin particles in the presence of divalent ions includes charge neutralization and a bridging mechanism.

Cave bacteria-induced amorphous calcium carbonate formation

Amorphous calcium carbonate (ACC) is a precursor of crystalline calcium carbonates that plays a key role in biomineralization and polymorph evolution. Here, we show that several bacterial strains isolated from a Hungarian cave produce ACC and their extracellular polymeric substance (EPS) shields ACC from crystallization. The findings demonstrate that bacteria-produced ACC forms in water-rich environment at room temperature and is stable for at least half year, which is in contrast to laboratory-produced ACC that needs to be stored in a desiccator and kept below 10 °C for avoiding crystallization. The ACC-shielding EPS consists of lipids, proteins, carbohydrates and nucleic acids. In particular, we identified large amount of long-chain fatty acid components. We suggest that ACC could be enclosed in a micella-like formula within the EPS that inhibits water infiltration. As the bacterial cells lyse, the covering protective layer disintegrates, water penetrates and the unprotected ACC grains crystallize to calcite. Our study indicates that bacteria are capable of producing ACC, and we estimate its quantity in comparison to calcite presumably varies up to 20% depending on the age of the colony. Since diverse bacterial communities colonize the surface of cave sediments in temperate zone, we presume that ACC is common in these caves and its occurrence is directly linked to bacterial activity and influences the geochemical signals recorded in speleothems.

Preparation, Performances, and Mechanisms of Microbial Flocculants for Wastewater Treatment

In recent years, close attention has been paid to microbial flocculants because of their advantages, including safety to humans, environmental friendliness, and acceptable removal performances. In this review, the preparation methods of microbial flocculants were first reviewed. Then, the performances of bioflocculants in the removal of suspended solids, heavy metals, and other organic pollutants from various types of wastewater were described and commented, and the removal mechanisms, including adsorption bridging, charge neutralization, chemical reactions, and charge neutrality, were also discussed. The future research needs on microbial flocculants were also proposed. This review would lead to a better understanding of current status, challenges, and corresponding strategies on microbial flocculants and bioflocculation in wastewater treatment.

Purification, characterization and anticancer activities of exopolysaccharide produced by Rhodococcus erythropolis HX-2

In the present study, an exopolysaccharide (EPS) producer Rhodococcus erythropolis HX-2 was isolated from Xinjiang oil field, China. The HX-2 EPS (name HPS) production reached 8.957 g/L by RSM in MSM medium. The HPS was purified by ethanol precipitation and fractionation by DEAE-Cellulose and Sepharose column, the yield of HPS was 3.736 g/L. HPS composed by glucose, galactose, fucose, mannose and glucuronic acid. FT-IR spectroscopy indicated the presence of a large amount of hydroxyl groups. NMR spectroscopy indicated the existence of both α and β-configuration for sugar moieties present in HPS. The degradation temperature (255.4 °C) of the HPS was determined by thermogravimetric analysis (TGA). A reticular structure of HPS was observed by SEM and the AFM analysis of the HPS revealed straight chains line. Meanwhile, the WSI and WHC of HPS were 92.15 ± 3.05% and 189.45 ± 5.65%, respectively. Finally, In vitro anticancer activity purified EPS was evaluated on L929 normal cells, A549 cancer cells, SMMC-7721 liver cancer cells and Hela cervical cancer cell. HPS inhibited the growth of cancer cells in a certain concentration without damage to normal cells. These characteristics indicate that its potential application value in food, industry and pharmaceutical application.

Removal of Pollutants in Mine Wastewater by a Non-Cytotoxic Polymeric Bioflocculant from Alcaligenes faecalis HCB2

Bioflocculation is a physicochemical technique often employed to efficiently remove colloidal water pollutants. Consequently, in this study, a bioflocculant was produced, characterised and applied to remove pollutants in mine wastewater. The maximum flocculation activity of 92% was recorded at 30 °C, pH 9.0 when maltose and urea were used as energy sources and 72 h of fermentation at the inoculum size of 1% (v/v). K⁺ proved to be a favourable cation. The bioflocculant yield of 4 g/L was obtained. Scanning electron microscopy illustrated a hexagonal-like structure of the bioflocculant. It is composed of carbohydrates and proteins in mass proportion of 88.6 and 9.5%, respectively. The Fourier transform infrared spectrum revealed the presence of hydroxyl, amide and amino functional groups. More than 73% of the bioflocculant was obtained after exposure to 600 °C using the thermogravimetric analyser. Human embryonic kidney 293 (HEK 293) cells exhibited 95% viability after being treated with 200 µg/µL of the bioflocculant. The flocculation mechanisms were proposed to be as a result of a double layer compression by K⁺, chemical reactions and bridging mechanism. The removal efficiencies of 59, 72, and 75% on biological oxygen demand, chemical oxygen demand and sulphur, were obtained respectively. Thus, the bioflocculant have potential use in wastewater treatment.

Occurrence of non-toxic bioemulsifiers during polyhydroxyalkanoate production by Pseudomonas strains valorizing crude glycerol by-product

While screening for polyhydroxyalkanoate (PHA) producing strains, using glycerol rich by-product as carbon source, it was observed that extracellular polymers were also secreted into the culture broth. The scope of this study was to characterize both intracellular and extracellular polymers, produced by Pseudomonas putida NRRL B-14875 and Pseudomonas chlororaphis DSM 50083, mostly focusing on those novel extracellular polymers. It was found that they fall into the class of bioemulsifiers (BE), as they showed excellent emulsion stability against different hydrocarbons/oils at various pH conditions, temperature and salinity concentrations. Cytotoxicity tests revealed that BE produced by P. chlororaphis inhibited the growth of highly pigmented human melanoma cells (MNT-1) by 50% at concentrations between 150 and 200 μg/mL, while no effect was observed on normal skin primary keratinocytes and melanocytes. This is the first study reporting mcl-PHA production by P. putida NRRL B-14785 and bioemulsifier production from both P. putida and P. chlororaphis strains.

Microbial Flocculants as an Alternative to Synthetic Polymers for Wastewater Treatment: A Review

Microorganisms such as bacteria, fungi, and microalgae have been used to produce bioflocculants with various structures. These polymers are active substances that are biodegradable, environmentally harmless, and have flocculation characteristics. Most of the developed microbial bioflocculants displayed significant flocculating activity (FA > 70–90%) depending on the strain used and on the operating parameters. These biopolymers have been investigated and successfully used for wastewater depollution in the laboratory. In various cases, selected efficient microbial flocculants could reduce significantly suspended solids (SS), turbidity, chemical oxygen demand (COD), total nitrogen (Nt), dye, and heavy metals, with removal percentages exceeding 90% depending on the bioflocculating materials and on the wastewater characteristics. Moreover, bioflocculants showed acceptable results for sludge conditioning (accepted levels of dry solids, specific resistance to filtration, moisture, etc.) compared to chemicals. This paper explores various bioflocculants produced by numerous microbial strains. Their production procedures and flocculating performance will be included. Furthermore, their efficiency in the depollution of wastewater will be discussed.

Removal of arsenite by a microbial bioflocculant produced from swine wastewater

This paper focused on the production and characteristics of a bioflocculant by using swine wastewater and its application in removing arsenite from aqueous solution. A series of experimental parameters including bioflocculant dose, calcium ions concentration, and solution pH value on arsenite uptake were evaluated. Results have demonstrated that a bioflocculant of 3.11 g L^-1 was achieved as the maximum yield after 60 h fermentation, with a main backbone of polysaccharides. Maximum arsenite removal efficiency of 99.2% can be reached by adding bioflocculant in two stages: 3 × 10^-3% (w/w) in the 1.0 min's rapid mixing (180 rpm) and 2 × 10^-3% (w/w) after 2.0 min's slow mixing (80 rpm) with pH value fixed at 7. Negative Gibbs free energy change (ΔG^o) indicated the spontaneous nature of arsenite removal. Arsenite was removed by the bioflocculant through bridging mechanisms.

Studies of cadmium(II), lead(II), nickel(II), cobalt(II) and chromium(VI) sorption on extracellular polymeric substances produced by Rhodococcus opacus and Rhodococcus rhodochrous

The adsorption of Cd(II), Pb(II), Ni(II), Co(II) and Cr(VI) ions on the extracellular polymeric substances (EPS) obtained from bacterial strain Rhodococcus opacus and Rhodococcus rhodochrous was investigated by the static sorption method. Influence of pH, time and temperature were studied. It was found that the influence of the pH value and time of adsorption depends on the type of adsorbed ions. For all investigated systems an increase of temperature above 35°C reduces adsorption. However, the static sorption capacities values oscillate around 1.5mmol/g, independently of the type of the studied metal ions. The adsorption mechanism of studied metal ions onto the tested EPSs seems to be very complex and it is probably due to an electrostatic attraction, a surface complex formation and chemical interaction between the metal ions and the functional groups (mainly hydroxyl, acetamido or amino groups) of bacterial extracellular biopolymers.

Identification of key genes involved in polysaccharide bioflocculant synthesis in Bacillus licheniformis

The present study reports the sequenced genome of Bacillus licheniformis CGMCC 2876, which is composed of a 4,284,461 bp chromosome that contains 4,188 protein-coding genes, 72 tRNA genes, and 21 rRNA genes. Additional analysis revealed an eps gene cluster with 16 open reading frames. Conserved Domains Database analysis combined with qPCR experiments indicated that all genes in this cluster were involved in polysaccharide bioflocculant synthesis. Phosphoglucomutase and UDP-glucose pyrophosphorylase were supposed to be key enzymes in polysaccharide secretion in B. licheniformis. A biosynthesis pathway for the production of polysaccharide bioflocculant involving the integration of individual genes was proposed based on functional analysis. Overexpression of epsDEF from the eps gene cluster in B. licheniformis CGMCC 2876 increased the flocculating activity of the recombinant strain by 90% compared to the original strain. Similarly, the crude yield of polysaccharide bioflocculant was enhanced by 27.8%. Overexpression of the UDP-glucose pyrophosphorylase gene not only increased the flocculating activity by 71% but also increased bioflocculant yield by 13.3%. Independent of UDP-N-acetyl-D-mannosamine dehydrogenase gene, flocculating activity, and polysaccharide yield were negatively impacted by overexpression of the UDP-N-acetylglucosamine 2-epimerase gene. Overall, epsDEF and gtaB2 were identified as key genes for polysaccharide bioflocculant synthesis in B. licheniformis. These results will be useful for further engineering of B. licheniformis for industrial bioflocculant production. Biotechnol. Bioeng. 2017;114: 645-655. © 2016 Wiley Periodicals, Inc.