Fabrication of Ni 2+ -nitrilotriacetic acid functionalized magnetic mesoporous silica nanoflowers for one pot purification and immobilization of His-tagged ω-transaminase

Proteases immobilized on nanomaterials for biocatalytic, environmental and biomedical applications: Advantages and drawbacks

Proteases have gained significant scientific and industrial interest due to their unique biocatalytic characteristics and broad-spectrum applications in different industries. The development of robust nanobiocatalytic systems by attaching proteases onto various nanostructured materials as fascinating and novel nanocarriers has demonstrated exceptional biocatalytic performance, substantial stability, and ease of recyclability over multiple reaction cycles under different chemical and physical conditions. Proteases immobilized on nanocarriers may be much more resistant to denaturation caused by extreme temperatures or pH values, detergents, organic solvents, and other protein denaturants than free enzymes. Immobilized proteases may present a lower inhibition. The use of non-porous materials in the immobilization prevents diffusion and steric hindrances during the binding of the substrate to the active sites of enzymes compared to immobilization onto porous materials; when using very large or solid substrates, orientation of the enzyme must always be adequate. The advantages and problems of the immobilization of proteases on nanoparticles are discussed in this review. The continuous and batch reactor operations of nanocarrier-immobilized proteases have been successfully investigated for a variety of applications in the leather, detergent, biomedical, food, and pharmaceutical industries. Information about immobilized proteases on various nanocarriers and nanomaterials has been systematically compiled here. Furthermore, different industrial applications of immobilized proteases have also been highlighted in this review.

A systematic review about affinity tags for one-step purification and immobilization of recombinant proteins: integrated bioprocesses aiming both economic and environmental sustainability

The present study reviewed and discussed the promising affinity tags for one-step purification and immobilization of recombinant proteins. The approach used to structure this systematic review was The Preferred Reporting Items for Systematic Review and Meta-analysis (PRISMA) methodology. The Scopus and Web of Science databases were used to perform the bibliographic survey by which 267 articles were selected. After the inclusion/exclusion criteria and the screening process, from 25 chosen documents, we identified 7 types of tags used in the last 10 years, carbohydrate-binding module tag (CBM), polyhistidine (His-tag), elastin-like polypeptides (ELPs), silaffin-3-derived pentalysine cluster (Sil3k tag), N-acetylmuramidase (AcmA tag), modified haloalkane dehalogenase (HaloTag®), and aldehyde from a lipase polypeptide (Aldehyde tag). The most used bacterial host for expressing the targeted protein was Escherichia coli and the most used expression vector was pET-28a. The results demonstrated two main immobilization and purification methods: the use of supports and the use of self-aggregating tags without the need of support, depending on the tag used. Besides, the chosen terminal for cloning the tag proved to be very important once it could alter enzyme activity. In conclusion, the best tag for protein one-step purification and immobilization was CBM tag, due to the eco-friendly supports that can be provided from industry wastes, the fast immobilization with high specificity, and the reduced cost of the process.

Hydrogel-Based Enzyme and Cofactor Co-Immobilization for Efficient Continuous Transamination in a Microbioreactor

A microbioreactor was developed in which selected amine transaminase was immobilized together with the cofactor pyridoxal phosphate (PLP) to allow efficient continuous transamination. The enzyme and cofactor were retained in a porous copolymeric hydrogel matrix formed in a two-plate microreactor with an immobilization efficiency of over 97%. After 10 days of continuous operation, 92% of the initial productivity was retained and no leaching of PLP or enzyme from the hydrogel was observed. The microbioreactor with co-immobilized cofactor showed similar performance with and without the addition of exogenous PLP, suggesting that the addition of PLP is not required during the process. The space-time yield of the microbioreactor was 19.91 g L⁻¹ h⁻¹, while the highest achieved biocatalyst productivity was 5.4 mg mg_enzyme⁻¹ h⁻¹. The immobilized enzyme also showed better stability over a wider pH and temperature range than the free enzyme. Considering the time and cost efficiency of the immobilization process and the possibility of capacity expansion, such a system is of great potential for industrial application.

A novel nickel-modified nano-magnetite for isolation of histidine-tagged proteins expressed in Escherichia coli

Nano-magnetite with superparamagnetism could be coated by some organic compounds or by nano Au or Pt via surface modifications with multi-step reactions for the applications of isolating histidine-tagged (His-tagged) proteins. Introducing active sites of binding histidine onto the surface of nano-magnetite was the ultimate task. However, multi-step treatments might result in departure of the coatings from the surface of the nano-magnetite, which led to loss of active sites. In this work, we reported a convenient and efficient way of treating nano-magnetites and applied them in isolating His-tagged proteins. Carboxylates were introduced on the surface of home-made nano-magnetite directly via ultrasonic mixing with sodium bitartrate rather than complicated surface modifications, which was proved by thermogravimetric analyses. Ni²⁺ was, therefore, caught by the carboxylates of the coating via the coordinate interaction, demonstrated by X-ray photoelectron spectra. The coated magnetic nanoparticles with the bonded Ni²⁺ were successfully employed to selectively bind and separate recombinant His-tagged proteins directly from the mixture of Escherichia coli cell lysate, and showed wonderful affinity for His-tagged proteins with the saturated adsorption amount being 556 mg g^-1. Additionally, such functionalized nano-magnetite manifested the excellent recyclability in isolating His-tagged proteins.

Synthesis of magnetic nanoparticles functionalized with histidine and nickel to immobilize His-tagged enzymes using β-galactosidase as a model

The aim of this study was to synthesize iron magnetic nanoparticles functionalized with histidine and nickel (Fe₃O₄-His-Ni) to be used as support materials for oriented immobilization of His-tagged recombinant enzymes of high molecular weight, using β-galactosidase as a model. The texture, morphology, magnetism, thermal stability, pH and temperature reaction conditions, and the kinetic parameters of the biocatalyst obtained were assessed. In addition, the operational stability of the biocatalyst in the lactose hydrolysis of cheese whey and skim milk by batch processes was also assessed. The load of 600 U_enzyme/g_support showed the highest recovered activity value (~50%). After the immobilization process, the recombinant β-galactosidase (HisGal) showed increased substrate affinity and greater thermal stability (~50×) compared to the free enzyme. The immobilized β-galactosidase was employed in batch processes for lactose hydrolysis of skim milk and cheese whey, resulting in hydrolysis rates higher than 50% after 15 cycles of reuse. The support used was obtained in the present study without modifying chemical agents. The support easily recovered from the reaction medium due to its magnetic characteristics. The iron nanoparticles functionalized with histidine and nickel were efficient in the oriented immobilization of the recombinant β-galactosidase, showing its potential application in other high-molecular-weight enzymes.

Improvement of Laccase Activity Via Covalent Immobilization over Mesoporous Silica Coated Magnetic Multiwalled Carbon Nanotubes for the Discoloration of Synthetic Dyes

Due to its environmental friendliness and biodegradable ability, the enzymatic decolorization of azo dyes is the best option. However, the free enzyme suffers from various limitations, including poor stability, no repeatable use, and a high expense, which is the key drawback for its practical use. In this analysis, the laccase enzyme was immobilized in mesoporous silica coated magnetic multiwalled carbon nanotubes (Fe₃O₄-MWCNTs@SiO₂) by a glutaraldehyde cross-linker to create an easily separable and stable enzyme. Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) were used to characterize the as-synthesized Fe₃O₄-MWCNTs@SiO₂. Laccase immobilized in Fe₃O₄-MWCNTs@SiO₂ showed a good improvement in temperature, pH, and storage stability. Moreover, the operational stability of the biocatalyst was improved, retaining 87% of its original activity even after 10 cycles of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) oxidation. The biocatalysts were applied for the decolorization of selected azo dyes without a mediator, and up to 99% of Eriochrome Black T (EBT), 98% of Acid Red 88 (AR 88), and 66% of Reactive Black 5 (RB5) were decolorized. Based on these properties, the biocatalysts can be potentially utilized in various environmental and industrial applications.

Magnetic micro-macro biocatalysts applied to industrial bioprocesses

The use of magnetic biocatalysts is highly beneficial in bioprocesses technology, as it allows their easy recovering and enhances biocatalyst lifetime. Thus, it simplifies operational processing and increases efficiency, leading to more cost-effective processes. The use of small-size matrices as carriers for enzyme immobilization enables to maximize surface area and catalysts loading, also reducing diffusion limitations. As highly expensive nanoparticles (nm size) usually aggregate, their application at large scale is not recommended. In contrast, the use of magnetic micro-macro (µm-mm size) matrices leads to more homogeneous biocatalysts with null or very low aggregation, which facilitates an easy handling and recovery. The present review aims to highlight recent trends in the application of medium-to-high size magnetic biocatalysts in different areas (biodiesel production, food and pharma industries, protein purification or removal of environmental contaminants). The advantages and disadvantages of these above-mentioned magnetic biocatalysts in bioprocess technology will be also discussed.

Parallel Interconnected Kinetic Asymmetric Transformation (PIKAT) with an Immobilized ω-Transaminase in Neat Organic Solvent

Comprising approximately 40% of the commercially available optically active drugs, α-chiral amines are pivotal for pharmaceutical manufacture. In this context, the enzymatic asymmetric amination of ketones represents a more sustainable alternative than traditional chemical procedures for chiral amine synthesis. Notable advantages are higher atom-economy and selectivity, shorter synthesis routes, milder reaction conditions and the elimination of toxic catalysts. A parallel interconnected kinetic asymmetric transformation (PIKAT) is a cascade in which one or two enzymes use the same cofactor to convert two reagents into more useful products. Herein, we describe a PIKAT catalyzed by an immobilized ω-transaminase (ωTA) in neat toluene, which concurrently combines an asymmetric transamination of a ketone with an anti-parallel kinetic resolution of an amine racemate. The applicability of the PIKAT was tested on a set of prochiral ketones and racemic α-chiral amines in a 1:2 molar ratio, which yielded elevated conversions (up to >99%) and enantiomeric excess (ee, up to >99%) for the desired products. The progress of the conversion and ee was also monitored in a selected case. This is the first report of a PIKAT using an immobilized ωTA in a non-aqueous environment.

Fast Immobilization of Human Carbonic Anhydrase II on Ni-Based Metal-Organic Framework Nanorods with High Catalytic Performance

Carbonic anhydrase (CA) has received considerable attention for its ability to capture carbon dioxide efficiently. This study reports a simple strategy for immobilizing recombinant carbonic anhydrase II from human (hCA II) on Ni-based MOFs (Ni-BTC) nanorods, which was readily achieved in a one-pot immobilization of His-tagged hCA II (His-hCA II). Consequently, His-hCA II from cell lysate could obtain an activity recovery of 99% under optimal conditions. After storing for 10 days, the immobilized His-hCA II maintained 40% activity while the free enzyme lost 91% activity. Furthermore, during the hydrolysis of p-nitrophenyl acetic acid, immobilized His-hCA II exhibited excellent reusability and still retained more than 65% of the original activity after eight cycles. In addition, we also found that Ni-BTC had no fixation effect on proteins without histidine-tag. These results show that the Ni-BTC MOFs have a great potential with high efficiency for and specific binding of immobilized enzymes.

Synthesis of magnetic nanoparticles with an IDA or TED modified surface for purification and immobilization of poly-histidine tagged proteins

Magnetic nanoparticles (MNPs) chelating with metal ions can specifically interact with poly-histidine peptides and facilitate immobilization and purification of proteins with poly-histidine tags. Fabrication of MNPs is generally complicated and time consuming. In this paper, we report the preparation of Ni(ii) ion chelated MNPs (Ni-MNPs) in two stages for protein immobilization and purification. In the first stage, organic ligands including pentadentate tris (carboxymethyl) ethylenediamine (TED) and tridentate iminodiacetic acid (IDA) and inorganic Fe₃O₄–SiO₂ MNPs were synthesized separately. In the next stage, ligands were grafted to the surface of MNPs and MNPs with a TED or IDA modified surface were acquired, followed by chelating with Ni(ii) ions. The Ni(ii) ion chelated forms of MNPs (Ni-MNPs) were characterized including morphology, surface charge, structure, size distribution and magnetic response. Taking a his-tagged glycoside hydrolase DspB (Dispersin B) as the protein representative, specific interactions were confirmed between DspB and Ni-MNPs. Purification of his-tagged DspB was achieved with Ni-MNPs that exhibited better performance in terms of purity and activity of DspB than commercial Ni-NTA. Ni-MNPs as enzyme carriers for DspB also exhibited good compatibility and reasonable reusability as well as improved performance in various conditions.

This article reports a novel approach for synthesizing magnetic nanoparticles with a modified surface for purification and immobilization of histidine-tagged proteins.

Simple Purification and Immobilization of His-Tagged Organophosphohydrolase from Cell Culture Supernatant by Metal Organic Frameworks for Degradation of Organophosphorus Pesticides

Coordinating unsaturated metal sites (CUS) on the surface of metal-organic frameworks (MOFs) could be used to adsorb His-tagged proteins. The specific adsorption between CUS and His-tagged proteins could reduce preparation steps, shorten preparation time, and could also avoid the binding between the metal ion of metalloenzyme active center and the chelating agent to ensure the enzyme activity. In this study, MIL-88A was synthesized by hydrothermal method and used to purify and immobilize His-tagged organophosphohydrolase (OpdA) in one step for organophosphate bioremediation. Under optimized conditions, OpdA@MIL-88A had a maximal activity of 1554 U/g_protein, which was nearly 5 times higher than free OpdA. Compared with free OpdA, OpdA@MIL-88A exhibited improved organic solvent tolerance, SDS tolerance, thermal stability, and storage stability. OpdA@MIL-88A was used to degrade organophosphorus pesticides on grapes and cucumbers. After reuse 6 times, OpdA@MIL-88A retained more than 66% and 61% of the initial activity, respectively. Therefore, this proposed strategy provided a facile and effective method for degradation of organophosphorus pesticides.

Spray-Dried Hierarchical Aggregates of Iron Oxide Nanoparticles and Their Functionalization for Downstream Processing in Biotechnology

In this work, the structuring of iron oxide nanoparticles via spray-drying (SD) of aqueous suspensions is investigated, leading to micrometer-sized aggregates with saturation magnetization comparable to that of the individual nanoparticles. Interestingly, the superparamagnetic behavior is retained despite the multicore structure. Modification of the aggregates via the addition of silica nanoparticles to the suspension allows for control of the resulting magnetization by adjusting the iron oxide content. Moreover, the morphology of the produced aggregates is gradually shifted from irregular inflated-like shapes in case of pure iron oxide aggregates to reach spherical structures when bringing the silica content to only 20%. The aggregates with different magnetization can be effectively separated in a simple column with an attached permanent magnet. Functionalization of pure iron oxide aggregates with a previously coupled ligand holding a nitrilotriacetic acid (NTA)-like moiety and subsequent loading with Ni²⁺ ions leads to the ability to bind 6-histidine (His₆)-tagged target proteins via chelation complexes for magnetic separation. The application of the presented system for the purification of recombinant protein A in multiple cycles is shown. The recyclability of the separation system in combination with the high degree of magnetic separation is promising for future applications in the field of preparative in situ protein purification.

Immobilized Whole-Cell Transaminase Biocatalysts for Continuous-Flow Kinetic Resolution of Amines

Immobilization of transaminases creates promising biocatalysts for production of chiral amines in batch or continuous-flow mode reactions. E. coli cells containing overexpressed transaminases of various selectivities and hollow silica microspheres as supporting agent were immobilized by an improved sol-gel process to produce immobilized transaminase biocatalysts with suitable stability and mechanical properties for continuous-flow applications. The immobilized cell-based transaminase biocatalyst proved to be durable and easy-to-use in kinetic resolution of four racemic amines 1a–d. The batch and continuous-flow mode kinetic resolutions with transaminase biocatalyst of opposite stereopreference provided access to both enantiomers of the corresponding amines. By using the most suitable immobilized transaminase biocatalysts, this study describes the first transaminase-based approach for the production of both pure enantiomers of 1-(3,4-dimethoxyphenyl)ethan-1-amine 1d.

Highly efficient production of chiral amines in batch and continuous flow by immobilized ω-transaminases on controlled porosity glass metal-ion affinity carrier

In this study, two stereocomplementary ω-transaminases from Arthrobacter sp. (AsR-ωTA) and Chromobacterium violaceum (Cv-ωTA) were immobilized via iron cation affinity binding onto polymer-coated controlled porosity glass beads (EziG™). The immobilization procedure was studied with different types of carrier materials and immobilization buffers of varying compositions, concentrations, pHs and cofactor (PLP) concentrations. Notably, concentrations of PLP above 0.1 mM were correlated with a dramatic decrease of the immobilization yield. The highest catalytic activity, along with quantitative immobilization, was obtained in MOPS buffer (100 mM, pH 8.0, PLP 0.1 mM, incubation time 2 h). Leaching of the immobilized enzyme was not observed within 3 days of incubation. EziG-immobilized AsR-ωTA and Cv-ωTA retained elevated activity when tested for the kinetic resolution of rac-α-methylbenzylamine (rac-α-MBA) in single batch experiments. Recycling studies demonstrated that immobilized EziG3-AsR-ωTA could be recycled for at least 16 consecutive cycles (15 min per cycle) and always affording quantitative conversion (TON ca. 14,400). Finally, the kinetic resolution of rac-α-MBA with EziG3-AsR-ωTA was tested in a continuous flow packed-bed reactor (157 μL reactor volume), which produced more than 5 g of (S)-α-MBA (>49% conversion, >99% ee) in 96 h with no detectable loss of catalytic activity. The calculated TON was more than 110,000 along with a space-time yield of 335 g L-1 h-1.

Thermostable enzyme-immobilized magnetic responsive Ni-based metal–organic framework nanorods as recyclable biocatalysts for efficient biosynthesis of S-adenosylmethionine

A novel magnetic responsive Ni-based metal–organic framework material was developed to efficiently separate and immobilize thermal enzymes with high catalytic performance.

Mesoporous silica nanoparticles with wrinkled structure as the matrix of myristic acid for the preparation of a promising new shape-stabilized phase change material via simple method

Wrinkled mesoporous silica nanoparticle (WMSN), with a special and highly uniform morphology, large specific surface area and pore volume, high porosity and radial-like wrinkled channels, was successfully prepared by a simple and easy synthetic method. WMSN was used as the matrix of myristic acid (MA) to prepare a new attractive shape-stabilized PCM (MA/WMSN), and the wrinkled channels of WMSN are useful to prevent the leakage of PCM, and increase the thermal stability and phase change enthalpy of shape-stabilized PCM. Characterizations of MA/WMSN, such as structure, crystallization properties, chemical properties and thermal properties were studied, and the interaction mechanism between the WMSN and MA molecules was elucidated. TGA results suggested that MA/WMSN had excellent thermal stability. When the loading of MA in MA/WMSN was 65%, the melting and crystallizing enthalpies of MA/WSSN were 92.0 J g⁻¹ and 86.0 J g⁻¹, respectively. Additionally, the thermal conductivity of MA/WMSN was 0.37 W mK⁻¹, which was about 1.37 times higher than that of the pure MA. All of the study results demonstrated that MA/WMSN possessed of favourable thermal conductivity, high latent heats and excellent thermal stability, and therefore it could be a suitable thermal energy storage material for practical applications.

Mesoporous silica nanoparticle with wrinkled structure as the matrix of myristic acid for the preparation of a promising new shape-stabilized phase change material via simple method.