Sustainable phycocyanin production from Arthrospira platensis using solar-control thin film coated photobioreactor

Co-Producing Phycocyanin and Bioplastic in Arthrospira platensis Using Carbon-Rich Wastewater

Microalgae can treat waste streams containing elevated levels of organic carbon and nitrogen. This process can be economically attractive if high value products are created simultaneously from the relatively low-cost waste stream. Co-production of two high value microalgal products, phycocyanin and polyhydroxybutyrate (PHB), was investigated using non-axenic Arthrospira platensis MUR126 and supplemental organic carbon (acetate, oxalate, glycerol and combinations). All supplemented cultures had higher biomass yield (g/L) than photoautotrophic control. All cultures produced PHB (3.6-7.8% w/w), except the control and those fed oxalate. Supplemented cultures showed a two to three-fold increase in phycocyanin content over the eight-day cultivation. Results indicate co-production of phycocyanin and PHB is possible in A. platensis, using mixed-waste organic carbon. However, supplementation resulted in growth of extremophile bacteria, particularly in cultures fed glycerol, and this had a negative impact on culture health. Refinement of the carbon dosing rate is required to minimise impacts of native bacterial contamination.

C-phycocyanin production with high antioxidant activity of a new thermotolerant freshwater Desertifilum tharense UAM-C/S02 strain

A native cyanobacterial strain, Desertifilum tharense UAM-C/S02, was studied as a possible C-phycocyanin (C-PC) producer. Photosynthetic activity (PA) assays through oxygen production determined the proper temperature and range of irradiances to be tested in a stirred tank photobioreactor. The highest C-PC productivity (97 mg L^-1 d^-1), with a yield of 86.46 mg_C-PC g_B^-1 was obtained at 730 µmol photons m^-2 s^-1 with a biomass productivity of 608 mg L^-1 d^-1 and the CO₂ fixation rate was 1,194  mg L^-1 d^-1. The 1.81 crude extract purity value is the highest reported for this genus, which was improved to biomarker-grade purity after a two-step purification strategy comprising precipitation with ammonium sulfate, followed by dialysis. The purified C-PC was almost entirely radical-free using 1 mg mL^-1, which validates its potential use in therapeutic formulations.

A review on the current application of light-emitting diodes for microalgae cultivation and its fiscal analysis

Microalgae are the promising source of products having a low and high economic value that include feedstock and vitamin supplements. Presently, their cultivation is being carried out by using sunlight in the open raceway ponds. However, this process has disadvantages like fluctuations in irradiance of the sunlight due to climatic changes and bad weather. Artificial lights, exploiting light-emitting diodes are beneficial in increasing the volumetric productivity of the microalgal biomass as it provides continuous illumination in the photobioreactors and assist in the external and internal design. However, the application of light-emitting diodes accrues high input costs. Though the cost of light-emitting diodes was estimated long ago, there is no recent economic analysis of the same. This study aims to enlist the applications of light-emitting diodes in microalgal cultivation with reference to internally illuminated photobioreactors coupled with the evaluation of the cost and energy balance of the artificial lights. The calculation shows that the electrical energy cost incurred during the application of light-emitting diodes for microalgae cultivation is approximately USD 15.19 kg^-1 DW. The collective fraction of electrical energy transformed into chemical energy (microalgae biomass) is around 6-8%. The cost of the light-emitting diodes can be decreased by the application of an Arduino-based automated control system to control the power supply to LEDs, photovoltaic powered photobioreactors and additional light. These techniques of input cost reduction have also been explored deeply in the present study. As estimated, they can reduce the cost of light-emitting diodes by 50%.HighlightsDiscussion on the current application of light-emitting diodes for microalgae cultivationA broad discussion on internally illuminated photobioreactors and their modificationsMicroalgae cultivation cost exploiting LEDs' is around USD 15.19 kg^-1 DWNet conservation of electrical energy during the cultivation process is 6-8%Photovoltaic powered PBRs and Arduino microcontrollers will decrease cultivation cost.

Astaxanthin: A super antioxidant from microalgae and its therapeutic potential

Astaxanthin is a ketocarotenoid, super antioxidant molecule. It has higher antioxidant activity than a range of carotenoids, thus has applications in cosmetics, aquaculture, nutraceuticals, therapeutics, and pharmaceuticals. Naturally, it is derived from Haematococcus pluvialis via a one-stage process or two-stage process. Natural astaxanthin significantly reduces oxidative and free-radical stress as compared to synthetic astaxanthin. The present review summarizes all the aspects of astaxanthin, including its structure, chemistry, bioavailability, and current production technology. Also, this paper gives a detailed mechanism for the potential role of astaxanthin as nutraceuticals for cardiovascular disease prevention, skin protection, antidiabetic and anticancer, cosmetic ingredient, natural food colorant, and feed supplement in poultry and aquaculture. Astaxanthin is one of the high-valued microalgae products of the future. However, due to some risks involved or not having adequate research in terms of long-term consumption, it is still yet to be explored by food industries. Although the cost of naturally derived astaxanthin is high, it accounts for only a 1% share in total astaxanthin available in the global market. Therefore, scientists are looking for ways to cut down the cost of natural astaxanthin to be made available to consumers.

Outdoor phycocyanin production in a standalone thermally-insulated photobioreactor

The operation of solar microalgal photobioreactors requires sufficient cooling and heating to maintain reliable high productivity year-round. These operations are energy-intensive and expensive. Growth characteristics and phycocyanin production of Arthrospira platensis were investigated during the austral winter using a thermally-insulated photobioreactor with photovoltaic panel integration for electricity generation. This was compared with a control photobioreactor under a cycle of heating (13-hour night) and thermostat-regulated cooling, and continuously heated raceway pond. Average temperature in the photovoltaic photobioreactor (21.0 ± 0.03 °C) was similar to that in the heated control. Biomass productivity of Arthrospira in the novel photobioreactor was 67% higher than in the raceway pond but significantly lower than the control. Phycocyanin productivity (16.3 ± 1.43 mgg^-1d^-1 and purity (1.2 ± 0.03) showed no variation between photobioreactors but was significantly lower in the raceway pond. Electrical energy output of the photovoltaic photobioreactor exceeded mixing energy needs by 75%. These results indicate that the novel photobioreactor offers a reliable, energy-efficient platform for large-scale production of high-value chemicals from microalgae.

Microalgae-Derived Pigments: A 10-Year Bibliometric Review and Industry and Market Trend Analysis

Microalgae productive chains are gaining importance as sustainable alternatives to obtain natural pigments. This work presents a review on the most promising pigments and microalgal sources by gathering trends from a 10-year bibliometric survey, a patents search, and an industrial and market analysis built from available market reports, projects and companies' webpages. The performed analysis pointed out chlorophylls, phycocyanin, astaxanthin, and β-carotene as the most relevant pigments, and Chlorella vulgaris, Spirulina platensis, Haematococcus pluvialis, and Dunaliella salina, respectively, as the most studied sources. Haematococcus is referred in the highest number of patents, corroborating a high technological interest in this microalga. The biorefinery concept, investment in projects and companies related to microalgae cultivation and/or pigment extraction is increasingly growing, particularly, for phycocyanin from Spirulina platensis. These pieces of evidence are a step forward to consolidate the microalgal pigments market, which is expected to grow in the coming years, increasing the prospects of replacing synthetic pigments by natural counterparts.