Filamentous microalgae Tribonema sp. cultivation in the anaerobic/oxic effluents of petrochemical wastewater for evaluating the efficiency of recycling and treatment

A critical review on phycoremediation of pollutants from wastewater-a novel algae-based secondary treatment with the opportunities of production of value-added products

Though the biological treatment employing bacterial strains has wide application in effluent treatment plant, it has got several limitations. Researches hence while looking for alternative biological organisms that can be used for secondary treatment came up with the idea of using microalgae. Since then, a large number of microalgal/cyanobacterial strains have been identified that can efficiently remove pollutants from wastewater. Some researchers also found out that the algal biomass not only acts as a carbon sink by taking up carbon dioxide from the atmosphere and giving oxygen but also is a renewable source of several value-added products that can be extracted from it for the commercial use. In this work, the cleaning effect of different species of microalgae/cyanobacteria on wastewater from varied sources along with the value-added products obtained from the algal biomass as observed by researchers during the past few years are reviewed. While a number of review works in the field of phycoremediation technology was reported in literature, a comprehensive study on phycoremediation of wastewater from different industries and household individually is limited. In the present review work, the efficiency of diverse microalgal/cyanobacterial strains in treatment of wide range of industrial effluents along with municipal wastewater having multi-pollutants has been critically reviewed.

Potential application of a newly isolated microalga Desmodesmus sp. GXU-A4 for recycling Molasses vinasse

The development of cost-effective and energy-efficient technologies for the stabilization of organic wastewater by microalgae has been essential and sought after. In the current study, GXU-A4 was isolated from an aerobic tank treating molasses vinasse (MV) and identified as Desmodesmus sp. based on its morphology, rbcL, and ITS sequences. It exhibited good growth with a high lipid content and chemical oxygen demand (COD) when grown using MV and the anaerobic digestate of MV (ADMV) as the growth medium. Three distinct COD concentrations for wastewater were established. Accordingly, GXU-A4 removed more than 90% of the COD from molasses vinasse (MV1, MV2, and MV3) with initial COD concentrations of 1193 mgL^-1, 2100 mgL^-1, and 3180 mgL^-1, respectively. MV1 attained the highest COD and color removal rates of 92.48% and 64.63%, respectively, and accumulated 47.32% DW (dry weight) of lipids and 32.62% DW of carbohydrates, respectively. Moreover, GXU-A4 grew rapidly in anaerobic digestate of MV (ADMV1, ADMV2, and ADMV3) with initial COD concentrations of 1433 mgL^-1, 2567 mgL^-1, and 3293 mgL^-1, respectively. Under ADMV3 conditions, the highest biomass reached 13.81 g L^-1 and accumulated 27.43% DW of lipids and 38.70% DW of carbohydrates, respectively. Meanwhile, the removal rates of NH₄-N and chroma in ADMV3 reached 91.10% and 47.89%, respectively, significantly reducing the concentration of ammonia nitrogen and color in ADMV. Thus, the results demonstrate that GXU-A4 has a high fouling tolerance, a rapid growth rate in MV and ADMV, the ability to achieve biomass accumulation and nutrient removal from wastewater, and a high potential for MV recycling.

Potential use of algae for the bioremediation of different types of wastewater and contaminants: Production of bioproducts and biofuel for green circular economy

Remediation by algae is a very effective strategy for avoiding the use of costly, environmentally harmful chemicals in wastewater treatment. Recently, industries based on biomass, especially the bioenergy sector, are getting increasing attention due to their environmental acceptability. However, their practical application is still limited due to the growing cost of raw materials such as algal biomass, harvesting and processing limitations. Potential use of algal biomass includes nutrients recovery, heavy metals removal, COD, BOD, coliforms, and other disease-causing pathogens reduction and production of bioenergy and valuable products. However, the production of algal biomass using the variable composition of different wastewater streams as a source of growing medium and the application of treated water for subsequent use in agriculture for irrigation has remained a challenging task. The present review highlights and discusses the potential role of algae in removing beneficial nutrients from different wastewater streams with complex chemical compositions as a biorefinery concept and subsequent use of produced algal biomass for bioenergy and bioactive compounds. Moreover, challenges in producing algal biomass using various wastewater streams and ways to alleviate the stress caused by the toxic and high concentrations of nutrients in the wastewater stream have been discussed in detail. The technology will be economically feasible and publicly accepted by reducing the cost of algal biomass production and reducing the loaded or attached concentration of micropollutants and pathogenic microorganisms. Algal strain improvement, consortium development, biofilm formation, building an advanced cultivation reactor system, biorefinery concept development, and life-cycle assessment are all possible options for attaining a sustainable solution for sustainable biofuel production. Furthermore, producing valuable compounds, including pharmaceutical, nutraceutical and pigment contents generated from algal biomass during biofuel production, could also help reduce the cost of wastewater management by microalgae.

Microalgae-Based Biorefineries: Challenges and Future Trends to Produce Carbohydrate Enriched Biomass, High-Added Value Products and Bioactive Compounds

Simple Summary

Microalgae-based biorefineries allow the simultaneous production of microalgae biomass enriched in a particular macromolecule and high-added and low-value products if a proper selection of the microalgae species and the cultivation conditions are adequate for the purpose. This review discusses the challenges and future trends related to microalgae-based biorefineries stressing the multi-product approach and the use of raw wastewater or pretreated wastewater to improve the cost-benefit ratio of biomass and products. Emphasis is given to the production of biomass enriched in carbohydrates. Microalgae-bioactive compounds as potential therapeutical and health promoters are also discussed. Future and novel trends following the circular economy strategy are also discussed.

Abstract

Microalgae have demonstrated a large potential in biotechnology as a source of various macromolecules (proteins, carbohydrates, and lipids) and high-added value products (pigments, poly-unsaturated fatty acids, peptides, exo-polysaccharides, etc.). The production of biomass at a large scale becomes more economically feasible when it is part of a biorefinery designed within the circular economy concept. Thus, the aim of this critical review is to highlight and discuss challenges and future trends related to the multi-product microalgae-based biorefineries, including both phototrophic and mixotrophic cultures treating wastewater and the recovery of biomass as a source of valuable macromolecules and high-added and low-value products (biofertilizers and biostimulants). The therapeutic properties of some microalgae-bioactive compounds are also discussed. Novel trends such as the screening of species for antimicrobial compounds, the production of bioplastics using wastewater, the circular economy strategy, and the need for more Life Cycle Assessment studies (LCA) are suggested as some of the future research lines.

Magnetic/electric field intervention on oil-rich filamentous algae production in the application of acrylonitrile butadiene styrene based wastewater treatment

Globally, the release of acrylonitrile-butadienestyrene (ABS) wastewater from numerous industries is a serious concern. Recently, oil-rich filamentous algae Tribonema sp has been grown utilizing toxic but nutrient-rich ABS effluent. Here, Tribonema sp. was cultivated under intervention of different magneto-electric combinatory fields (MCFs) (control, 0.6 V/cm, 1 h/d-1.2 V/cm, 1 h/d-0.6 V/cm, and 1 h/d-1.2 V/cm). Results showed MCF (1 h/d-0.6 V/cm) intervention increased the biomass by 9.7% (2.4 g/L) combined with high removal efficiencies (95% and 99%) of ammonium nitrogen and total phosphorus. The chemical oxygen demand (COD) removal rate increased to 82%, 6% higher than the control. Moreover, MCF of 1 h/d-0.6 V/cm significantly increased lipid and carbohydrate by 7.71% and 4.73% respectively. MCF increased premium fatty acid content such as palmitic acid (C16:0), myristic acid (C14: 0), and hexadecenoic acid (C16:1). MCF intervention also supported a diverse microbial flora, offering a favorable solution for ABS wastewater treatment.

Study and evaluation of the characteristics of saline wastewater (brine) produced by desalination and industrial plants

Desalination and industrial plants all around the world generate large amounts of saline wastewater (brine). The discharge of brine from facilities poses a severe environmental threat, while at the same time, the opportunity to recover resources is being lost as discharged brine is rich in valuable metals that could be recovered as salts/minerals. To this aim, this study presents and analyzes for the first time the characteristics of different brine effluents (from industries such as desalination, oil and gas production, petrochemical, aquaculture, pharmaceutical, textile) to prevent environmental pollution and to recover valuable resources (i.e., salts, minerals, metals, chemicals) enabling the concept of waste-to-resource (circular water economy model). The results revealed that the common salinity values in brine effluents range from 0.5 to 150 g/L, while the only exception is the produced water from the oil and gas industry (up to 400 g/L). Brine effluents from all sectors contain sodium, chloride, calcium, and potassium ions in high concentrations, while the production of common salts such as NaCl, CaCl₂, and MgCl₂ from brine can be economically profitable. Besides common ions, precious metals such as lithium, rubidium, and cesium are present in low concentrations (<25 mg/L); however, their extraction from brine effluents can be significantly profitable due to their very high sale price. The treatment and valorization of brine can be implemented by the hybridization of membrane-based, chemical, biological, and thermal-based technologies/processes in minimal and zero liquid discharge (MLD/ZLD) systems.

Biomass production of carbohydrate-rich filamentous microalgae coupled with treatment and nutrients recovery from acrylonitrile butadiene styrene based wastewater: Synergistic enhancement with low carbon dioxide supply strategy

This study attempted to remove acrylonitrile and acetophenone from simulated acrylonitrile butadiene styrene (ABS) based wastewater while recovering nitrogen and phosphorus using the carbohydrate-rich filamentous microalgae Tribonema sp.. Results showed that typical acetophenone and acrylonitrile presented significant inhibitory effect on Tribonema sp. growth and co-metabolism of CO₂ improved the tolerance of Tribonema sp. to toxic pollutants. The microalgae biomass increased by 34.47% (3.16 g/L) and 58.17% (3.97 g/L) via supplementing 2% CO₂ in the 100 mg/L acrylonitrile and acetophenone groups, respectively. The filamentous microalga was rich in carbohydrates and its productivity was further enhanced by 32.52% and 70.34%, respectively, in 100 mg/L acrylonitrile and acetophenone groups with 2% CO₂ supplement. The synergistic CO₂ supply strategy effectively enhanced the biomass production of filamentous microalgae, and moreover, improved the treatment efficiency of ABS based wastewater simulated by acetophenone or acrylonitrile addition, while at same time enhanced the recovery of nitrogen and phosphorus nutrients.

Improving sedimentation and lipid production of microalgae in the photobioreactor using saline wastewater

Saline wastewater was used in this study to culture freshwater microalgae Chlorella pyrenoidosa in sequencing batch photobioreactor to improve the sedimentation and lipid production of algal cells. Influent salinity of 0.5% or above effectively promoted the sedimentation of microalgae in the settling stage of photobioreactor, and greatly reduced the algal biomass in effluent. The mechanism of the saline wastewater in improving the sedimentation of microalgae included decreasing zeta potential, increasing cell particle size and promoting extracellular polymeric substances synthesis, which varied with influent salinity. Saline wastewater also promoted the lipid accumulation in microalgae. Lipid content of microalgae increased with increasing influent salinity. However, the growth of microalgae was greatly inhibited at the influent salinity of 2.0% and 3.0%. Therefore, the PBR with influent salinity of 1.0% achieved the highest productivity of microalgae lipid. The saturation of fatty acids of microalgae gradually increased with increasing influent salinity.

Annotated Genome Sequence of the High-Biomass-Producing Yellow-Green Alga Tribonema minus

Here, we report the annotated genome sequence for a heterokont alga from the class Xanthophyceae. This high-biomass-producing strain, Tribonema minus UTEX B 3156, was isolated from a wastewater treatment plant in California. It is stable in outdoor raceway ponds and is a promising industrial feedstock for biofuels and bioproducts.

Insights into upstream processing of microalgae: A review

The aim of this review is to provide insights into the upstream processing of microalgae, and to highlight the advantages of each step. This review discusses the most important steps of the upstream processing in microalgae research such as cultivation modes, photobioreactors design, preparation of culture medium, control of environmental factors, supply of microalgae seeds and monitoring of microalgal growth. An extensive list of bioreactors and their working volumes used, elemental composition of some well-known formulated cultivation media, different types of wastewater used for microalgal cultivation and environmental variables studied in microalgae research has been compiled in this review from the vast literature. This review also highlights existing challenges and knowledge gaps in upstream processing of microalgae and future research needs are suggested.

Petrochemical wastewater and produced water: Treatment technology and resource recovery

Petrochemical wastewater and produced water from oil and gas operations typically contain an array of organic and inorganic contaminants. The complexity of the wastewater, stringent environmental regulations, and the need for sustainable solutions have driven many research efforts in studying and developing advanced technology or combined treatment processes. On the other hand, the wastewater itself can be resources for water, energy, and other valuable product if appropriate technology is developed to recover them in a cost-effective fashion. The research advances in wastewater treatment and resource recovery technology are reviewed and summarized. For petrochemical wastewater, progresses were made in advanced oxidation, biological processes, and recovery of energy and water from wastewater. For produced water, many efforts were focused on membrane processes, combined systems, and biological treatment. PRACTITIONER POINTS: Significant progress continued to be made on petrochemical wastewater and produced water treatment. Recent technological advances in various treatment processes were summarized. Technologies focusing on resource recovery (e.g., water or energy) were presented.

Post treatment of swine anaerobic effluent by weak electric field following intermittent vacuum assisted adjustment of N:P ratio for oil-rich filamentous microalgae production

A weak electric field (EF) was applied to decolorize the swine anaerobic effluent, which was followed by N:P ratio adjustment via intermittent-vacuum stripping (IVS) system for oil-rich filamentous microalgae Tribonema sp. cultivation. A higher electric field strength, higher temperature, and lower pH conditions showed higher efficiency in decolorization and nutrients removal during EF application. In the group of 30:1 (N:P) ratio, Tribonema sp. had the largest biomass accumulation (2.04 g·L^-1) after 14 days cultivation. However, the 20:1 group had highest oil accumulation (oil content 55.4 ± 3.4%), while 30:1 (N: P) group was 42.3 ± 1.8%. Under the conditions of sufficient nitrogen (50:1 group), the highest contents of α-linolenic acid (15.5%) and ω-3 fatty acids (21.8%) were reached. The integrated treatment of EF, IVS and microalgae cultivation demonstrated to be effective for nutrients recycling and sustainable biomass production.

Magnetic field intervention on growth of the filamentous microalgae Tribonema sp. in starch wastewater for algal biomass production and nutrients removal: Influence of ambient temperature and operational strategy

This paper investigated the effects of temperature and cultivation methods (batch or semi-continuous culture) on the filamentous microalgae Tribonema sp. biomass production and nutrients removal in starch wastewater under low intensity magnetic field (MF) intervention. The MF significantly promoted algal growth in the late logarithmic-phase of batch cultivation, and the effect was even more obvious at lower temperatures. The MF treated group at 30 °C accumulated the highest biomass of 4.44 g/L of batch culture, an increase of 15.0% compared with the control group. The oil content of Tribonema sp. was enhanced with the MF intervention, especially for the batch culture. In the semi-continuous culture under MF intervention, Tribonema sp. reached the high biomass of 18.45 g/L after 25 days. When gradually reducing hydraulic retention time (HRT) to 1 day, the average removal rates for COD, TN, NH₃-N and TP were all more than 90% in the semi-continuous cultivation.

Influence of nutrient supplementation and starvation conditions on the biomass and lipid productivities of Micractinium reisseri grown in wastewater for biodiesel production

Generation of biodiesel from microalgae grown in wastewater can offer a cost-effective approach, whilst wastewaters usually do not contain the optimum concentrations of the essential nutrients and carbon sources that result in lowering the productivities of biomass and lipid. This study aimed to overcome this limitation by manipulating wastewater with various concentrations of nutrients (NO₃^-, PO₄^3-, Cl^- and SO₄^2-) and three carbon sources either individually or in combination to cultivate Micractinium reisseri for biodiesel production. Initially, various dilutions of wastewater were tested and a concentration up to 75% of wastewater showed the highest biomass productivity (0.076 g L^-1 d^-1) and lipid productivity (0.014 g L^-1 d^-1). The optimum manipulating conditions for maximum lipid production and the highest productivity required 50% decrease in phosphorous from the concentration of the control medium and supplementation with 1.0 g L^-1 of glucose. Under this condition, biomass and lipid productivities increased by 1.7 and 4-folds, respectively, compared to those observed in the control. Furthermore, phosphorous starvation condition in the presence of glucose significantly improved fatty acid profile in the biomass and biodiesel quality related parameters.