Effect of liquid supply on the performance of a fungal bio-trickling filter treating hydrophobic VOC

Effect of toluene on m-xylene removal in a biotrickling filter: Performance, biofilm characteristics, and microbial analysis

Hydrophobic volatile organic compounds (VOCs) pose a challenge to the removal efficiency in biotrickling filters (BTFs). The addition of relatively hydrophilic substances presents a promising approach for enhancing the elimination of hydrophobic VOCs. In this study, toluene was introduced into the BTF system alongside m-xylene, and their mixing ratios were changed to explore the interactions and mechanisms under different conditions. The result showed that the most pronounced synergistic interaction occurred when the mixing concentration ratio of m-xylene and toluene was 2:1. The removal efficiency (RE) of m-xylene increased from 88% to 97%, and the elimination capacity (EC) of m-xylene changed from 64 to 72 g m-3 h-1. Under this condition, there was a notable increase in biomass, extracellular polymeric substance (EPS) content, and relative hydrophobicity. Microbial diversity was enhanced observably with Berkeleyces and Mycobacterium potentially playing a positive role in co-degradation. Meanwhile, microbial metabolic function prediction indicated a significant enhancement in metabolic functions. Therefore, the introduction of relatively hydrophilic VOCs represents an effective strategy for enhancing the removal of hydrophobic VOCs in the BTFs.

Bioaerosols released from multistage biofilter for gaseous benzene removal: Escape behavior and pathogenicity

Biological deodorization systems are widely used to control odors and volatile organic compounds. However, the secondary contamination of bioaerosol emissions is a noteworthy issue in the operation of biofilters for off-gas purification. In this study, a multistage biofilter for benzene treatment was utilized to investigate the bioaerosol emissions under different flow rates and spray intervals. At the outlet of the biofilter, 99-7173 CFU/m3 of bioaerosols were detected, among which pathogens accounted for 8.93-98.73 %. Proteobacteria and Firmicutes dominated bioaerosols at the phylum level. The Mantel test based on the Bray-Curtis distance revealed strong influences of flow rate introduced to the biofilter and biomass colonized on the packing materials (PMs) on bioaerosol emissions. The non-metric multidimensional scaling results suggested a correlation between the bioaerosol community and bacteria on the PMs. Bacillus and Stenotrophomonas were the two main genera stripped from the biofilm on PMs to form the bioaerosols. SourceTracker analysis confirmed that microorganisms from the PMs near outlet contributed an average of 22.3 % to bioaerosols. Pathogenic bacteria carried by bioaerosols included Bacillus, Serratia, Stenotrophomonas, Achromobacter, Enterococcus, and Pseudomonas. Bioaerosols were predicted to cause human diseases, with antimicrobial drug resistance and bacterial infectious disease being the two main pathogenic pathways. Stenotrophomonas sp. LMG 19833, Pseudomonas sp., and Stenotrophomonas sp. were the keystone species in the bioaerosol co-occurrence network. Overall, results of present study promote the insight of bioaerosols, particularly pathogen emissions, and provide a basis for controlling bioaerosol contamination from biofilters.

Study on Gaseous Chlorobenzene Treatment by a Bio-Trickling Filter: Degradation Mechanism and Microbial Community

Large-flow waste gas generated from the pharmaceutical and chemical industry usually contains low concentrations of VOCs (volatile organic compounds), and it is also the key factor that presents challenges in terms of disposal. To date, due to the limitations of mass transfer rate and microbial degradation ability, the degradation performance of VOCs using the biological method has not been ideal. Therefore, in this study, the sludge from a chlorobenzene-containing wastewater treatment plant was inoculated into our experimental bio-trickling filter (BTF) to explore the feasibility of domestication and degradation of gaseous chlorobenzene by highly active microorganisms. The kinetics of its mass transfer reaction and microbial community dynamics were also discussed. Moreover, the main process parameters of BTF for chlorobenzene degradation were optimized. The results showed that the degradation effect of chlorobenzene reached more than 85% at an inlet concentration of chlorobenzene 700 mg·m−3, oxygen concentration of 10%, and an empty bed retention time (EBRT) of 80 s. The mass transfer kinetic analysis indicated that the process of chlorobenzene degradation in the BTF occurred between the zero-stage reaction and the first-stage reaction. This BTF contributed significantly to the biodegradability of chlorobenzene, overcoming the limitation of gas-to-liquid/solid mass transfer of chlorobenzene. The analysis of the species diversity showed that Thermomonas, Petrimona, Comana, and Ottowia were typical organic-matter-degrading bacteria that degraded chlorobenzene efficiently with xylene present.

Effects of Water Content and Irrigation of Packing Materials on the Performance of Biofilters and Biotrickling Filters: A Review

Biofilters (BFs) and biotrickling filters (BTFs) are two types of bioreactors used for treatment of volatile organic compounds (VOCs). Both BFs and BTFs use packing materials in which various microorganisms are immobilised. The water phase in BFs is stationary and used to maintain the humidity of packing materials, while BTFs have a mobile liquid phase. Optimisation of irrigation of packing materials is crucial for effective performance of BFs and BTFs. A literature review is presented on the influence of water content of packing materials on the biofiltration efficiency of various pollutants. Different configurations of BFs and BTFs and their influence on moisture distribution in packing materials were discussed. The review also presents various packing materials and their irrigation control strategies applied in recent biofiltration studies. The sources of this review included recent research articles from scientific journals and several review articles discussing BFs and BTFs.