Constructing surface oxygen defects at CuO-Co3O4 interface to boost toluene oxidation over CuO/Co3O4 catalysts

As a typical heterogeneous catalytic process, the catalytic combustion of toluene over Co3O4-based catalysts is strongly depends on the surface properties of catalysts, especially the concentration of surface oxygen defects. Here, a novel way was proposed to construct chemically bonded CuO-Co3O4 interface by chemical deposition of CuO onto Co3O4 nanoflowers. The interfacial refinement effect between CuO and Co3O4 support disrupted the ordered atomic arrangement and created countless unsaturated coordination sites at CuO-Co3O4 interface, inducing a significant generation of surface oxygen defects. Surface-rich oxygen vacancies enhanced the capacity of 20%CuO/Co3O4-R to adsorb and activate oxygen species. Benefiting from this, 90 % toluene conversion was reached at 228 °C over 20%CuO/Co3O4-R, which was much lower than that over 20%CuO/Co3O4-S prepared by impregnation method and CuO/Co3O4-mix obtained by mechanically mixing way. In-situ DRIFTS analysis revealed that toluene could be directly decomposed into benzaldehyde at the highly defective CuO-Co3O4 interface, leading to toluene oxidation following the path of toluene → benzaldehyde → benzoate → maleic anhydride → water and carbon dioxide over 20%CuO/Co3O4-R, which was significantly different from decomposition mechanism over 20%CuO/Co3O4-S. Additionally, 20%CuO/Co3O4-R displayed terrific recyclability and outstanding stability, showing good application potential.

Investigation on the source of VOCs emission from indoor construction materials using electronic sensors and TD-GC-MS

Indoor air quality (IAQ) is critical to the health and wellbeing of people. As the majority of people spend greater amounts of time indoors, either in office spaces or households, the level of air pollutants in such environments is critical. Building materials and furniture are known sources of air pollutants such as Volatile Organic Compounds (VOCs) and may be associated with discomfort, detrimental health of the occupants, etc. In this study, the VOCs found in a brand new office complex were monitored over a period of 6 months, with an emphasis on monitoring and quantifying harmful VOCs and identifying their emission source. Air samples were taken from a closed, unoccupied office space on a weekly basis and analysed using Thermal Desorption-Gas Chromatography-Mass Spectrometry (TD-GC-MS), while continuous monitoring of the air quality was performed using two commercially available IAQ sensors. To identify the source of the emitted VOCs, pieces of all construction material that were used in the office, including flooring, finished wall material, and adhesive glues, were removed, and placed in air-tight glass containers prior to analysis confirming that the source of VOCs is indeed the flooring. Identified compounds included mainly material origin VOCs such as BTEX (benzene, toluene, ethylbenzene, xylene) and styrene, but also common VOCs such as acetone and propan-2-ol. Of significant importance was the concentration of toluene that was found to be the most abundant VOC in both the flooring material and the indoor air.

Determination of the oil absorption value of inorganic powder by tracer-assisted headspace gas chromatography

This paper reports a method for determining the oil absorption value of inorganic powder based on tracer-assisted headspace gas chromatographic (HS-GC) technique. The method was carried out by adding 25 μL droplet of toluene-Dioctyl Phthalate solution onto the surface of 1.0 g inorganic powder, then sealing the headspace vial and shaking it to make the powder spherical. The amount of toluene that not been adsorbed by inorganic powder was quantified using HS-GC with the optimal equilibrium temperature and time conditions of 100 °C and 7 min, respectively. A new mathematical model shows that the oil absorption value can be determined from the signal of toluene. The results show that the employed method has good precision (the relative standard deviation < 3.6 %) and accuracy (R2 = 0.993). This method is simple and accurate, and can be an reliable tool for testing the oil absorption value of inorganic powder sample.

Coagulation-centered three-step approach for removing by-product organic pollutants from tetrabromobisphenol A industrial wastewater: Experimental and theoretic investigations

The challenge of meeting discharge standards for tetrabromobisphenol A (TBBPA) production wastewater, characterized by high concentrations of organic by-products, necessitates effective treatment methods. This study identifies 2,4-dibromophenol, 2,6-dibromophenol, 2,4,6-tribromophenol, chlorobenzene, and toluene as the primary organic by-product pollutants. A coagulation-centered three-step approach was established for TBBPA industrial wastewater treatment. The initial step involves acidification treatment to exploit the reduced solubility of 2,4-dibromophenol, 2,6-dibromophenol, and 2,4,6-tribromophenol under acidic conditions, with the optimal pH determined as 2.7-3.1. An acid-activated montmorillonite coagulant (AMC), prepared through roasting and high-pressure acid leaching, exhibits a distinctive "Core-shell" structure, contributing significantly to the combined coagulation and adsorption mechanism. The acid-soluble aluminum salts in AMC form positively charged flocs, electrostatically attracting negatively charged organic compounds in the wastewater. Simultaneously, the porous insoluble silicon framework displays strong adsorption capacity for pollutants. The removal efficiencies for toluene, chlorobenzene, 2,4-dibromophenol, 2,6-dibromophenol, and 2,4,6-tribromophenol reached 88.2%, 89.1%, 88.8%, 87.1%, and 89.4%, respectively. Elemental analysis reveals that the coloration of the wastewater stems from complexation reactions between phenolic compounds and Fe3+, originating from the corrosion of iron or steel reaction vessel. Post-treatment with cation exchange resin resulted in removal efficiencies of 5.2%, 59.1%, 80.2%, 77.9%, and 88.3% for the five substances, respectively. This study outlines a crucial pathway for the effective purification of TBBPA wastewater.

Exposure to BTEX is associated with cardiovascular disease, dyslipidemia and leukocytosis in national US population

BACKGROUND

Comprehensive research on the effects of individual benzene, toluene, ethylbenzene, and xylenes (BTEX) and their mixture measured in blood samples, on cardiovascular diseases (CVD) and related risk factors among the general population is limited.

OBJECTIVES

To investigate the effects of blood individual and mixed BTEX on total CVD and its subtypes, lipid profiles, and white blood cell (WBC) count.

METHODS

Survey-weighted multivariate logistic regression was used to examine the associations between blood individual and mixed BTEX with CVD and its subtypes in 17,007 participants from NHANES 1999-2018. The combined effect of BTEX mixture on CVD was estimated using weighted quantile sum modeling and quantile g-computation. Weighted multivariate linear regression assessed the effects of BTEX on lipid profiles and WBC, including its five-part differential count.

RESULTS

In comparison to the reference quartile of BTEX mixture, individuals in the highest quartile had a significantly increased adjusted odds ratio of CVD risk (1.64, 95 % CI: 1.23 to 2.19, P for trend = 0.008). Positive associations were observed for benzene, toluene, ethylbenzene, and m-/p-xylene, demonstrating a monotonically increasing exposure-response relationship. Mixed BTEX was associated with congestive heart failure (CHF), angina pectoris, and heart attack. Individual benzene, toluene, and ethylbenzene were associated with CHF, while toluene, ethylbenzene, and all xylene isomers were linked to angina pectoris. Benzene, toluene, and o-xylene were associated with heart attack. Both mixed and individual BTEX showed positive associations with triglycerides, cholesterol, low-density lipoprotein, and WBC, including its five-part differential count, but a negative relationship with high-density lipoprotein. Subgroup analyses identified modifying effects of smoking, drinking, exercise, BMI, hypertension, and diabetes on the associations between specific toxicants and CVD risk.

CONCLUSIONS

Exposure to BTEX was associated with cardiovascular diseases and cardiovascular risk factors. These findings emphasize the importance of considering blood BTEX levels when assessing cardiovascular health risks.

Co-exposure of petrochemical workers to noise and mixture of benzene, toluene, ethylbenzene, xylene, and styrene: Impact on mild renal impairment and interaction

Epidemiological evidence concerning effects of simultaneous exposure to noise and benzene, toluene, ethylbenzene, xylene, and styrene (BTEXS) on renal function remains uncertain. In 2020, a cross-sectional study was conducted among 1160 petrochemical workers in southern China to investigate effects of their co-exposure on estimated glomerular filtration rate (eGFR) and mild renal impairment (MRI). Noise levels were assessed using cumulative noise exposure (CNE). Urinary biomarkers for BTEXS were quantified. We found the majority of workers had exposure levels to noise and BTEXS below China's occupational exposure limits. CNE, trans, trans-muconic acid (tt-MA), and the sum of mandelic acid and phenylglyoxylic acid (PGMA) were linearly associated with decreased eGFR and increased MRI risk. We observed U-shaped associations for both N-acetyl-S-phenyl-L-cysteine (SPMA) and o-methylhippuric acid (2-MHA) with MRI. In further assessing the joint effect of BTEXS (β, -0.164 [95% CI, -0.296 to -0.033]) per quartile increase in all BTEXS metabolites on eGFR using quantile g-computation models, we found SPMA, tt-MA, 2-MHA, and PGMA played pivotal roles. Additionally, the risk of MRI associated with tt-MA was more pronounced in workers with lower CNE levels (P = 0.004). Multiplicative interaction analysis revealed antagonisms of CNE and PGMA on MRI risk (P = 0.034). Thus, our findings reveal negative dose-effect associations between noise and BTEXS mixture exposure and renal function in petrochemical workers. With the exception of toluene, benzene, xylene, ethylbenzene, and styrene are all concerning pollutants for renal dysfunction. Effects of benzene, ethylbenzene, and styrene exposure on renal dysfunction were more pronounced in workers with lower CNE.

Exposure to benzene, toluene, ethylbenzene, and xylene (BTEX) at Nigeria's petrol stations: a review of current status, challenges and future directions

Introduction

In Nigeria, because of increasing population, urbanization, industrialization, and auto-mobilization, petrol is the most everyday non-edible commodity, and it is the leading petroleum product traded at the proliferating Nigeria's petrol stations (NPSs). However, because of inadequate occupational health and safety (OHS) regulatory measures, working at NPSs exposes petrol station workers (PSWs) to a large amount of hazardous benzene, toluene, ethylbenzene, and xylene (BTEX) compounds.

Methods

Studies on BTEX exposures among Nigerian PSWs are scarce. Thus, constraints in quantifying the health risks of BTEX limit stakeholders' ability to design practical risk assessment and risk control strategies. This paper reviews studies on the OHS of Nigerian PSWs at the NPSs.

Results

Although knowledge, attitude, and practices on OHS in NPSs vary from one Nigeria's study setting to another, generally, safety practices, awareness about hazards and personal protective equipment (PPE), and the use of PPE among PSWs fell below expectations. Additionally, air quality at NPSs was poor, with a high content of BTEX and levels of carbon monoxide, hydrogen sulfide, particulate matter, and formaldehyde higher than the World Health Organization guideline limits.

Discussion

Currently, regulatory bodies' effectiveness and accountability in safeguarding OHS at NPSs leave much to be desired. Understanding the OHS of NPSs would inform future initiatives, policies, and regulations that would promote the health and safety of workers at NPSs. However, further studies need to be conducted to describe the vulnerability of PSWs and other Nigerians who are occupationally exposed to BTEX pollution. More importantly, controlling air pollution from hazardous air pollutants like BTEX is an essential component of OHS and integral to attaining the Sustainable Development Goals (SDG) 3, 7, and 11.

Natural attenuation of BTEX and chlorobenzenes in a formerly contaminated pesticide site in China: Examining kinetics, mechanisms, and isotopes analysis

Groundwater contamination from abandoned pesticide sites is a prevalent issue in China. To address this problem, natural attenuation (NA) of pollutants has been increasingly employed as a management strategy for abandoned pesticide sites. However, limited studies have focused on the long-term NA process of co-existing organic pollutants in abandoned pesticide sites by an integrated approach. In this study, the NA of benzene, toluene, ethylbenzene, and xylene (BTEX), and chlorobenzenes (CBs) in groundwater of a retired industry in China was systematically investigated during the monitoring period from June 2016 to December 2021. The findings revealed that concentrations of BTEX and CBs were effectively reduced, and their NA followed first-order kinetics with different rate constants. The sulfate-reducing bacteria, nitrate-reducing bacteria, fermenting bacteria, aromatic hydrocarbon metabolizing bacteria, and reductive dechlorinating bacteria were detected in groundwater. It was observed that distinct environmental parameters played a role in shaping both overall and key bacterial communities. ORP (14.72%) and BTEX (12.89%) were the main drivers for variations of the whole and key functional microbial community, respectively. Moreover, BTEX accelerated reductive dechlorination. Furthermore, BTEX and CBs exhibited significant enrichment of 13C, ranging from +2.9 to +27.3‰, demonstrating their significance in situ biodegradation. This study provides a scientific basis for site management.

Efficient Photothermal Catalytic Oxidation Enabled by Three-Dimensional Nanochannel Substrates

Photothermal catalysis exhibits promising prospects to overcome the shortcomings of high-energy consumption of traditional thermal catalysis and the low efficiency of photocatalysis. However, there is still a challenge to develop catalysts with outstanding light absorption capability and photothermal conversion efficiency for the degradation of atmospheric pollutants. Herein, we introduced the Co3O4 layer and Pt nanoclusters into the three-dimensional (3D) porous membrane through the atomic layer deposition (ALD) technique, leading to a Pt/Co3O4/AAO monolithic catalyst. The 3D ordered nanochannel structure can significantly enhance the solar absorption capacity through the light-trapping effect. Therefore, the embedded Pt/Co3O4 catalyst can be rapidly heated and the O2 adsorbed on the Pt clusters can be activated to generate sufficient O2- species, exhibiting outstanding activity for the diverse VOCs (toluene, acetone, and formaldehyde) degradation. Optical characterization and simulation calculation confirmed that Pt/Co3O4/AAO exhibited state-of-the-art light absorption and a notable localized surface plasmon resonance (LSPR) effect. In situ diffuse reflectance infrared Fourier transform spectrometry (in situ DRIFTS) studies demonstrated that light irradiation can accelerate the conversion of intermediates during toluene and acetone oxidation, thereby inhibiting byproduct accumulation. Our finding extends the application of AAO's optical properties in photothermal catalytic degradation of air pollutants.

Effect of toluene on m-xylene removal in a biotrickling filter: Performance, biofilm characteristics, and microbial analysis

Hydrophobic volatile organic compounds (VOCs) pose a challenge to the removal efficiency in biotrickling filters (BTFs). The addition of relatively hydrophilic substances presents a promising approach for enhancing the elimination of hydrophobic VOCs. In this study, toluene was introduced into the BTF system alongside m-xylene, and their mixing ratios were changed to explore the interactions and mechanisms under different conditions. The result showed that the most pronounced synergistic interaction occurred when the mixing concentration ratio of m-xylene and toluene was 2:1. The removal efficiency (RE) of m-xylene increased from 88% to 97%, and the elimination capacity (EC) of m-xylene changed from 64 to 72 g m-3 h-1. Under this condition, there was a notable increase in biomass, extracellular polymeric substance (EPS) content, and relative hydrophobicity. Microbial diversity was enhanced observably with Berkeleyces and Mycobacterium potentially playing a positive role in co-degradation. Meanwhile, microbial metabolic function prediction indicated a significant enhancement in metabolic functions. Therefore, the introduction of relatively hydrophilic VOCs represents an effective strategy for enhancing the removal of hydrophobic VOCs in the BTFs.

The removal of toluene by thermoscatalytic oxidation using CeO2-based catalysts:a review

Volatile organic compounds (VOCs) pose a serious threat to human health and the ecological environment. Thermal catalytic oxidation based on cerium dioxide based (CeO2-based) catalysts is widely used in the degradation of toluene. However, new problems and challenges such as how to reduce the energy consumption during catalytic oxidation, improve the anti-poisoning performance of catalysts, and enhance the multi-species synergistic catalytic ability of catalysts continue to emerge. On this basis, we systematically summarize the current status of research progress on the thermocatalytic oxidation of toluene based on CeO2-based catalysts. Firstly, we summarized the rules on how to improve the catalytic performance and anti-poisoning performance of CeO2-based catalysts; Secondly, we discussed the effect of light reaction conditions on the thermal coupled catalytic oxidation of toluene; In addition to this, we explored the current status of synergistic multi-pollutant degradation, mainly of toluene; Finally, we summarized the mechanism of catalytic oxidation of toluene by combining theoretical simulation calculations, in-situ infrared analyses, and other means. We present the promising applications of CeO2-based catalysts in the catalytic oxidation of toluene, and hope that these summaries will provide an important reference for the catalytic treatment of VOCs.

Low-level occupational exposure to BTEX and dyschromatopsia: a systematic review and meta-analysis

Objectives. The present study aimed to assess whether occupational exposure to low concentrations of benzene, toluene, ethylbenzene and xylene (BTEX) is associated with color vision impairment. Methods. We queried PubMed, Scopus, Embase, Web of Science and ProQuest as the main databases, as well as gray literature such as Google Scholar. A random-effects model was used to assess relative risk. A funnel plot was created to assess publication bias. Meta-regression analysis was applied to identify variables that explain the between-study variation in the reported risk estimate. Results. An overall standardized mean difference of 0.529 (95% confidence interval [0.269, 0.788]; p < 0.0001) was obtained in the random-effects model, which corresponded to a medium-size effect. Duration and the levels of exposure to benzene, toluene and xylene were the significant predictors of the magnitude of the combined risk estimate. Chronic exposure to low levels of BTEX was associated with dyschromatopsia determined by the color confusion index. Conclusions. The impairments can occur even at exposures lower than the occupational exposure limits of BTEX. However, there are several flaws in the determination of workers' exposure, which did not allow to establish how low a level of these chemicals can cause color vision impairment.

The Impact of Environmental Benzene, Toluene, Ethylbenzene, and Xylene Exposure on Blood-Based DNA Methylation Profiles in Pregnant African American Women from Detroit

African American women in the United States have a high risk of adverse pregnancy outcomes. DNA methylation is a potential mechanism by which exposure to BTEX (benzene, toluene, ethylbenzene, and xylenes) may cause adverse pregnancy outcomes. Data are from the Maternal Stress Study, which recruited African American women in the second trimester of pregnancy from February 2009 to June 2010. DNA methylation was measured in archived DNA from venous blood collected in the second trimester. Trimester-specific exposure to airshed BTEX was estimated using maternal self-reported addresses and geospatial models of ambient air pollution developed as part of the Geospatial Determinants of Health Outcomes Consortium. Among the 64 women with exposure and outcome data available, 46 differentially methylated regions (DMRs) were associated with BTEX exposure (FDR adjusted p-value < 0.05) using a DMR-based epigenome-wide association study approach. Overall, 89% of DMRs consistently exhibited hypomethylation with increasing BTEX exposure. Biological pathway analysis identified 11 enriched pathways, with the top 3 involving gamma-aminobutyric acid receptor signaling, oxytocin in brain signaling, and the gustation pathway. These findings highlight the potential impact of BTEX on DNA methylation in pregnant women.

Ambient air pollutants and breast cancer stage in Tehran, Iran

This study aimed to examine the impacts of single and multiple air pollutants (AP) on the severity of breast cancer (BC). Data of 1148 diagnosed BC cases (2008-2016) were obtained from the Cancer Research Center and private oncologist offices in Tehran, Iran. Ambient PM10, SO2, NO, NO2, NOX, benzene, toluene, ethylbenzene, m-xylene, p-xylene, o-xylene, and BTEX data were obtained from previously developed land use regression models. Associations between pollutants and stage of BC were assessed by multinomial logistic regression models. An increase of 10 μg/m3 in ethylbenzene, o-xylene, m-xylene, and 10 ppb of NO corresponded to 10.41 (95% CI 1.32-82.41), 4.07 (1.46-11.33), 2.89 (1.08-7.73) and 1.08 (1.00-1.15) increase in the odds of stage I versus non-invasive BC, respectively. Benzene (OR, odds ratio = 1.16, 95% CI 1.01-1.33) and o-xylene (OR = 1.18, 1.02-1.38) were associated with increased odds of incidence of BC stages III & IV versus non-invasive stages. BC stage I and stage III&IV in women living in low SES areas was associated with significantly higher levels of benzene, ethylbenzene, o-xylene, and m-xylene. The highest multiple-air-pollutants quartile was associated with a higher odds of stage I BC (OR = 3.16) in patients under 50 years old. This study provides evidence that exposure to AP is associated with increased BC stage at diagnosis, especially under premenopause age.

Fate, behaviour and microbial response of diluted bitumen and conventional crude spills in a simulated warm freshwater environment

Diluted bitumen (DB), one of the most transported unconventional crude oils in Canada's pipelines, raises public concerns due to its potential spillage into freshwater environments. This study aimed to compare the fate and behaviour of DB versus conventional crude (CC) in a simulated warm freshwater environment. An equivalent of 10 L of either DB or CC was spilled into 1200 L of North Saskatchewan River (NSR) water containing natural NSR sediment (2.4 kg) in a mesoscale spill tank and its fate and behaviour at air/water temperatures of 18 °C/24 °C were monitored for 56 days. Oil mass distribution analysis showed that 42.3 wt % of CC and 63.6 wt% of DB resided in the oil slicks at the end of 56-day tests, consisting mainly high molecular weight (HMW) compounds (i.e., resins and asphaltenes). The lost oil contained mainly low molecular weight (LMW) compounds (i.e., light saturates and some aromatics) into the atmosphere, water column, and sediment through collective weathering processes. Notably, weathered CC emulsified with water and remained floating until the end, while the weathered DB mat started to lose its buoyancy after 24 days under quiescent conditions and resurfaced once waves were applied. Analysis of the microbial communities of water pre- and post-spills revealed the replacement of indigenous microbial communities with hydrocarbon-degrading species. Exposure to CC reduced the microbial diversity by 12%, while exposure to DB increased the diversity by 10%. During the early stages of the spill (up to Day 21), most dominant species were positively correlated with the benzene, toluene, ethylbenzene, and xylenes (BTEX) content or polycyclic aromatic hydrocarbon (PAH) content of the water column, while the dominant species at the later stages (Days 21-56) of the spill were negatively correlated with BTEX or PAH content and positively correlated with the total organic carbon (TOC) content in waters.

Off-gassing from firefighter suits (nomex) as an indoor source of BTEXS

The clothes and special equipment of firefighters can be a source of indoor air pollution. Nevertheless, it has not been investigated so far what the scale of the release of various compounds from such materials into the indoor air can be. The following study analysed the results of an experiment involving the passive measurement of concentrations of selected compounds, i.a. benzene, toluene, ethylbenzene, m,p-xylene, o-xylene, styrene, isopropylbenzene and n-propylbenzene (BTEXS) in the air of a room where firefighters' special clothing, which had been previously exposed to emissions from simulated fires, was stored. The study included simulations of fires involving three materials: wood, processed wood (OSB/fibreboard) and a mixture of plastics. After being exposed to the simulated fire environment, special clothing (so-called nomex) was placed in a sealed chamber, where passive collection of BTEXS was carried out using tube-type axial passive samplers and a gas chromatograph. Irrespective of which burned material special clothing was exposed to, the compound emitted into the air most intensively was toluene. Its rate of release from a single nomex ranges from 4.4 to 28.6 μg h-1, while the corresponding rates for the sum of BTEXS are between 9.97 and 44.29 μg h-1.

Dual function of H2O on interfacial intermediate conversion and surface poisoning regulation in simultaneous photodegradation of NO and toluene

Co-existing air pollutants, especially NOx and VOCs, will generate secondary photochemical pollution under light irradiation. However, simultaneous elimination of multi-pollutants has long been a challenge. Photocatalysis could turn the reaction pathway between pollutants to convert them into harmless products, which is a promising technology for multi-pollutant control. Here we achieved synergistic photocatalytic degradation of NO and C7H8 on InOOH photocatalyst, and the performance can be adjusted by H2O through affecting the interaction between surface species and catalyst. In situ DRIFTS and GC-MS revealed that the improved efficiency originated from the fast conversion of C-N coupling intermediates led by additional H2O. Surface characterizations and DFT simulation determined that accumulated nitrates will compete with the adsorption of NO and C7H8, resulting in a decline in efficiency in the later stage. Although improved efficiency would bring more nitrates, as H2O has comparable adsorption to nitrate at the same site, high humidity can mitigate the deactivation. The photocatalyst can be also simply regenerated by water washing. This work reveals the complex interaction in the multi-pollutant system and provides guidelines for precisely regulating the synergistic removal of NOx and VOCs.

Health risk assessment of exposure to benzene, toluene, ethyl benzene, and xylene in shoe industry-related workplaces

Benzene, toluene, ethyl benzene, and xylene (BTEX) are prevalent pollutants in shoe industry-related workplaces. The aim of this study was to assess exposure to BTEX and their carcinogenic and non-carcinogenic risks in shoe-industry-related workplaces. This study was carried out at different shoe manufactures, small shoe workshop units, shoe markets, and shoe stores in Tabriz, Iran in 2021. Personal inhalation exposure to BTEX was measured using the National Institute for Occupational Safety and Health (NIOSH) 1501 method. Carcinogenic and non-carcinogenic risks due to inhalation exposure to BTEX were estimated by United States Environmental Protection Agency (U.S. EPA) method based on Mont Carlo simulation. Results showed that the concentrations of benzene and toluene were higher than the threshold limit value (TLV) in both gluing and non-gluing units of shoe manufactures. The total carcinogenic risk (TCR) due to exposure to benzene and ethyl benzene was considerable in all shoe industry-related workplaces. Also, the hazard index (HI) as a non-carcinogenic index was higher than standard levels in all shoe industry-related workplaces. Therefore, shoe industry-related workers are at cancer and non-cancer risks due to exposure to BTEX. Prevention measures need to be implemented to reduce the concentration of BTEX in shoe industry-related workplaces.

Removal of toluene via non-thermal plasma generated by applying rare-earth tungsten electrode and nanosecond pulsed power supply

The objective of this investigation is to evaluate the characteristics associated with degradation of toluene through the utilization of non-thermal plasma (NTP) generated via application of a low-work-function electrode and nanosecond pulsed power supply. Initially, a comparative analysis is made between toluene removal efficiency utilizing the low-work-function electrode and that achieved with the conventional stainless-steel electrode. The outcomes demonstrate that NTP generated by the low-work-function electrode exhibits markedly superior removal efficiency for toluene in comparison to the stainless-steel electrode operating at the same voltage. Subsequently, the impacts of voltage, pulse frequency, and initial concentration of toluene on the removal efficiency and production of by-products are investigated. It is found that as the voltage and frequency increase, the removal efficiency also increases, and a maximum toluene removal efficiency of 87.2% is achieved at a voltage of 12,000 V and pulse frequency of 2000 Hz. The removal efficiency first increases and then decreases with increasing toluene initial concentration. The investigation also finds that energy yield is negatively correlated with voltage and pulse frequency and positively correlated with the initial concentration. Finally, the reaction products were subjected to quantitative analysis using GC-MS. Based on the analysis results, potential reaction pathways are inferred.

BTEX in indoor air of barbershops and beauty salons: Characterization, source apportionment and health risk assessment

BACKGROUND

Volatile organic compounds, mainly BTEX, are among the pollutants of concern in beauty salons and barbershops that threaten both staff personnel and clients' health. This study aimed to determine the concentration of BTEX in barbershops and beauty salons and assess the carcinogenic and non-carcinogenic risks based on the actual risk coefficients. Also, possible sources of BTEX were determined.

METHOD

Samples were collected by passive sampling. Quantitative and qualitative measurements of BTEX compounds were performed using gas chromatography-mass spectrometry (GC-MASS). Subsequently, the health risks were assessed according to the US Environmental Protection Agency. SPSS24 software and positive matrix factorization (PMF) analysis were used for statistical analysis and source apportionment respectively.

RESULTS

Toluene is the most abundant compound in beauty salons, with a maximum concentration of 219.4 (μg/m3) in beauty salons. Results indicated that the mean ELCR value estimated for benzene regarding female staff exposure (1.04 × 10-5) was higher than that for men (4.05 × 10-6). Also, ELCR values of ethylbenzene for staff exposure were 2.08 × 10-6 and 3.8 × 10-6 for men and women, respectively, and possess possible carcinogenesis risks.

CONCLUSION

Use of solvents and cosmetic products, improper heating systems, and type of service are the sources that probably contribute to BTEX emissions in beauty salons. It is necessary to follow health guidelines and conduct continuous monitoring for their implementation, in addition to setting a mandated occupational regulation framework or air quality requirements, to improve the health conditions in beauty salons.

Hydroxylated transformation products obtained after UV irradiation of the current-use brominated flame retardants hexabromobenzene, pentabromotoluene, and pentabromoethylbenzene

Hexabromobenzene (HBB), pentabromotoluene (PBT), and pentabromoethylbenzene (PBEB) are current-use brominated flame retardants (cuBFRs) which have been repeatedly detected in environmental samples. Since information on hydroxylated transformation products (OH-TPs) was scarcely available, the three polybrominated compounds were UV irradiated for 10 min in benzotrifluoride. Fractionation on silica gel enabled the separate collection and identification of OH-TPs. For more insights, aliquots of the separated OH-TPs were UV irradiated for another 50 min (60 min total UV irradiation time). The present investigation of polar UV irradiation products of HBB, PBT, and PBEB was successful in each case. Altogether, eight bromophenols were detected in the case of HBB (three Br3-, four Br4-, and one Br5-isomer), and nine OH-TPs were observed in the case of PBT/PBEB (six Br3- and three Br4-congeners). In either case, Br➔OH exchange was more relevant than H➔OH exchange. Also, such exchange was most relevant in meta- and ortho-positions. As a further point, and in agreement with other studies, the transformation rate decreased with decreasing degree of bromination. UV irradiation of HBB additionally resulted in the formation of tri- and tetrabrominated dihydroxylated compounds (brominated diphenols) that were subsequently identified. These dihydroxylated transformation products were found to be more stable than OH-TPs.

Health risk assessment of workers' exposure to BTEX and PM during refueling in an urban fuel station

The proximity of fuel stations to the roads and the activities inside the station can contribute to PM and VOCs and impose health risks on station workers. The study presents the exposure and health risk assessment of the fuel station personnel to total volatile organic compounds (TVOCs) and particulate matter (PM) during refueling operations. TVOCs and PM monitoring were carried out at a fuel station in Chennai, India, for 1 week in March 2021, covering both weekdays and weekends. The health risks were assessed using EPA's health impact assessment methodology. Exposure to TVOCs (3177.39 ± 5450.32 μg/m3) exceeded the EPA standard of 5 μg/m3, by more than 500 times, peaking during refueling operations. The average concentrations of PM10, PM2.5, and PM1 were 76.55 ± 23.08 μg/m3, 41.81 ± 9 μg/m3, and 30.38 ± 7.56 μg/m3, respectively. The concentrations were observed to be high during morning and evening hours due to the increased traffic on the adjacent road and inside the fuel station. The synergistic health risks linked with long-term exposure to high concentrations of BTEX and PM were also estimated. At the fuel station, a significant contribution to the SOA formation potential was shown by toluene, followed by m-xylene, p-xylene, o-xylene, ethylbenzene, and benzene. Furthermore, the deposition of airborne particles in the workers' respiratory tract was calculated using the Multiple Path Particle Dosimetry model while considering the daily average exposure duration of 12 h. The results showed that 59% of PM10 particles were deposited in the head region, whereas 11% and 10% of PM2.5 and PM1 particles were deposited in the pulmonary region. Hence, the health risk assessment indicated no non-cancer risk of exposure to PM (hazard quotient = 0.13) to station personnel exposed regularly for 1 year. However, prolonged exposure to VOCs for more than 1 year can result in both carcinogenic and non-carcinogenic risk (hazard quotient = 0.045 and cancer risk > 10-6) in workers.

The burden of disease attributable to indoor air pollutants in China from 2000 to 2017

BACKGROUND

High-level exposure to indoor air pollutants (IAPs) and their corresponding adverse health effects have become a public concern in China in the past 10 years. However, neither national nor provincial level burden of disease attributable to multiple IAPs has been reported for China. This is the first study to estimate and rank the annual burden of disease and the financial costs attributable to targeted residential IAPs at the national and provincial level in China from 2000 to 2017.

METHODS

We first did a systematic review and meta-analysis of 117 articles from 37 231 articles identified in major databases, and obtained exposure-response relationships for the candidate IAPs. The exposure levels to these IAPs were then collected by another systematic review of 1864 articles selected from 52 351 articles. After the systematic review, ten IAPs with significant and robust exposure-response relationships and sufficient exposure data were finally targeted: PM2·5, nitrogen dioxide, sulphur dioxide, ozone, carbon monoxide, radon, formaldehyde, benzene, toluene, and p-dichlorobenzene. The annual exposure levels in residences were then evaluated in all 31 provinces in mainland China continuously from 2000 to 2017, using the spatiotemporal Gaussian process regression model to analyse indoor originating IAPs, and the infiltration factor method to analyse outdoor originating IAPs. The disability-adjusted life-years (DALYs) attributable to the targeted IAPs were estimated at both national and provincial levels in China, using the population attributable fraction method. Financial costs were estimated by an adapted human capital approach.

FINDINGS

From 2000 to 2017, annual DALYs attributable to the ten IAPs in mainland China decreased from 4620 (95% CI 4070-5040) to 3700 (3210-4090) per 100 000. Nevertheless, in 2017, IAPs still ranked third among all risk factors, and their DALYs and financial costs accounted for 14·1% (95% CI 12·3-15·6) of total DALYs and 3·45% (3·01-3·82) of the gross domestic product. Specifically, the rank of ten targeted IAPs in order of their contribution to DALYs in 2017 was PM2·5, carbon monoxide, radon, benzene, nitrogen dioxide, ozone, sulphur dioxide, formaldehyde, toluene, and p-dichlorobenzene. The DALYs attributable to IAPs were 9·50% higher than those attributable to outdoor air pollution in 2017. For the leading IAP, PM2·5, the DALYs attributable to indoor origins are 18·3% higher than those of outdoor origins.

INTERPRETATION

DALYs attributed to IAPs in China have decreased by 20·0% over the past two decades. Even so, they are still much higher than those in the USA and European countries. This study can provide a basis for determining which IAPs to target in various indoor air quality standards and for estimating the health and economic benefits of various indoor air quality control approaches, which will help to reduce the adverse health effects of IAPs in China.

FUNDING

The National Key Research and Development Program of China and the National Natural Science Foundation of China.

The need for a multi-level approach to occupational safety and health among Asian and Asian American beauty service workers

Asian and Asian Americans (A/AA) are a group overlooked in general health outcomes but especially occupational safety and health outcomes. In the United States, the beauty service microbusiness industry (e.g., nail salons) predominantly employs immigrant Asian women who regularly encounter a plethora of occupational hazards (e.g., harmful chemical exposures -toluene, formaldehyde, bloodborne pathogens, fungi. However, due to the precariousness of beauty service jobs, cultural and linguistic barriers, and social determinants of health, A/AA beauty service workers face complex occupational safety and health challenges that require interdisciplinary collaboration and cultural competency to address. This commentary will discuss a multi-level approach including specific outreach partners that will offer the required diverse skillsets necessary for improving the occupational safety and health for this worker population in this microbusiness industry. Implications and suggestions for interventions and policy changes are also recommended utilizing the National Institute on Minority Health and Health Disparities' Research Framework.

[Characteristics and Health Risk Assessment of Volatile Organic Compounds in Different Functional Zones in Baoji in Summer]

The situation of air pollution in Guanzhong Plain has been increasing in recent years; hence, it is very important to study the characteristics of volatile organic compounds (VOCs) and their health risks in urban functional zones. We analyzed 115 VOCs using gas chromatography-mass spectrometry/hydrogen ion flame detector (GC-MS/FID) and high performance liquid chromatography (HPLC) at four sampling sites in the traffic, comprehensive, industrial, and scenic zones of Baoji. We analyzed the main components and key species in the different functional zones. Ozone formation potential (OFP),·OH consumption rate (L·OH), and secondary organic aerosol formation potential (SOAFP) were used to evaluate the environmental impact, and the hazard index (HI) and lifetime cancer risk (LCR) methods were employed. The results revealed that the mean values of φ(TVOCs) in the traffic, comprehensive, industrial, and scenic zones were (59.63±23.85)×10-9, (42.92±11.88)×10-9, (60.27±24.09)×10-9, and (55.54±7.44)×10-9, respectively. The dominant contributors at the traffic zone were alkanes, and those at the other functional zones were OVOCs. Acetaldehyde, acetone, n-butane, and isopentane were abundant at different functional zones. According to the characteristic ratios of VOCs, the average ratio of toluene to benzene (T/B) at the traffic, comprehensive, industrial, and scenic zones were 1.84, 2.39, 1.28, and 1.64, respectively, and the ratio of iso-pentane to n-pentane (i/n) was mainly between 1 and 4. The results indicated that VOCs in Baoji were significantly affected by vehicle emissions and gasoline evaporation, biomass and coal combustion, and industrial coatings and foundry. The ratio of m/p-xylene to ethylbenzene (X/E) was lower than 2 at the four functional zones, and the minimum was 1.79 at the scenic zones; the results revealed that X/E was small, and the aging degree of air masses was high, indicating the influence of regional transport. According to the ratio of formaldehyde to acetaldehyde (C1/C2) and the ratio of acetaldehyde to propanal (C2/C3), it was suggested that there may have been evident anthropogenic emission sources, and the photochemical reaction had an important effect on aldehydes and ketones. Environmental impact assessment results revealed that OVOCs and alkenes contributed significantly to OFP and OFP from large to small was as follows:industrial zone>scenic zone>traffic zone>comprehensive zone. The range of L·OH in each functional zone was 8.77-15.82 s-1, with isoprene contributing the most in the industrial zone and acetaldehyde contributing the most at other functional zones. The SOAFP of each functional zone was as follows:scenic zone>comprehensive zone>traffic zone>industrial zone. Toluene, m/p-xylene, and isoprene were the notable species. According to the health risk assessment of EPA, the HI of toxic VOCs in all functional zones was lower than 1, which was at an acceptable level. However, the number of days with HI>1 in industrial zones accounted for 42.86% of the total sampling days, indicating a high risk. The lifetime carcinogenic risk (LCR) of the traffic, comprehensive, industrial, and scenic zones were 1.83×10-5, 1.21×10-5, 1.85×10-5, and 1.63×10-5, respectively, which were all in grade Ⅲ of the rating system, indicating a high probability of cancer risk. Species with LCR greater than 10-6 were formaldehyde; acetaldehyde; 1,2-dibromoethane; 1,2-dichloroethane; 1,2-dichloropropane; and chloroform.

Monitoring of Volatile Additives from Plant Protection Products in Tomatoes Using HS-SPME-GC-HRMS: Targeted and Suspect Approaches

Additives present in plant protection products (PPPs) are normally not monitored after sample treatments. In this study, the fate of additives detected by targeted and nontargeted analysis in tomato samples treated with two PPPs was carried out. The study was carried out in a greenhouse for 12 days, in which two applications with each PPP were made. Compounds were extracted by applying a headspace solid phase microextraction (HS-SPME) and analyzed by gas chromatography coupled to high resolution mass spectrometry (GC-HRMS), performing targeted and suspect approaches. Three targeted and 15 nontargeted compounds were identified at concentration levels of up to 150 μg/kg. Compounds detected encompassed benzene, toluene, indene, and naphthalene derivatives, as well as conservatives and flavouring compounds. Most of them degraded in less than 7 days after the second application, following first-order kinetic. This study aims to reduce knowledge gaps regarding additives and their fate under real climatic conditions of greenhouses cultivations.

Single-chemical and mixture effects of multiple volatile organic compounds exposure on liver injury and risk of non-alcoholic fatty liver disease in a representative general adult population

Evidence on liver injury and non-alcoholic fatty liver disease (NAFLD) from volatile organic compounds (VOCs) exposure is insufficient. A cross-sectional study including 3011 US adults from the National Health and Nutrition Examination Survey was conducted to explore the associations of urinary exposure biomarkers (EBs) for 13 VOCs (toluene, xylene, ethylbenzene, styrene, acrylamide, N,N-dimethylformamide, acrolein, crotonaldehyde, 1,3-butadiene, acrylonitrile, cyanide, propylene oxide, and 1-bromopropane) with liver injury biomarkers and the risk of NAFLD by performing single-chemical (survey weight regression) and mixture (Bayesian kernel machine regression [BKMR] and weighted quantile sum [WQS]) analyses. We found significant positive associations of EBs for toluene and 1-bromopropane with alanine aminotransferase (ALT), EBs for toluene, crotonaldehyde, and 1,3-butadiene with asparate aminotransferase (AST), EBs for 1,3-butadiene and cyanide with alkaline phosphatase (ALP), EBs for xylene and cyanide with hepamet fibrosis score (HFS), EBs for the total 13 VOCs (except propylene oxide) with United States fatty liver index (USFLI), and EBs for xylene, N,N-dimethylformamide, acrolein, crotonaldehyde, and acrylonitrile with NALFD; and significant inverse associations of EBs for ethylbenzene, styrene, acrylamide, acrolein, crotonaldehyde, 1,3-butadiene, acrylonitrile, cyanide, and propylene oxide with total bilirubin, EBs for ethylbenzene, styrene, acrylamide, acrolein, 1,3-butadiene, acrylonitrile, and cyanide with albumin (ALB), EBs for ethylbenzene, styrene, acrylamide, N,N-dimethylformamide, acrolein, crotonaldehyde, 1,3-butadiene, acrylonitrile, cyanide, and propylene oxide with total protein (TP), and EB for 1-bromopropane with AST/ALT (all P-FDR<0.05). In BKMR and WQS, the mixture of VOC-EBs was significantly positively associated with ALT, AST, ALP, HFS, USFLI, and the risk of NAFLD, while significantly inversely associated with TBIL, ALB, TP, and AST/ALT. VOCs exposure was associated with liver injury and increased risk of NAFLD in US adults. These findings highlight that great attention should be paid to the potential risk of liver health damage from VOCs exposure.

Identify Primary Air Pollution Sources of BTEX by Using Positive Matrix Factorization (PMF): A Case Study of Ho Chi Minh City, Vietnam

Ho Chi Minh City (HCMC) is one of the main socioeconomic and financial centers of Vietnam. The city also faces serious air pollution. However, the city polluted with benzene, toluene, ethylbenzene, and xylene (BTEX) has rarely been studied. We used positive matrix factorization (PMF) to analyze BTEX concentrations measured at two sampling locations to identify the main sources of BTEX in HCMC. The locations represented residential area (i.e., To Hien Thanh) and industrial area (i.e., Tan Binh Industrial Park). At the To Hien Thanh location, the average concentrations of benzene, ethylbenzene, toluene, and xylene were 6.9, 14.4, 4.9, and 12.7 µg/m3, respectively. At the Tan Binh location, the average concentrations of benzene, ethylbenzene, toluene, and xylene were 9.8, 22.6, 2.4, and 9.2 µg/m3, respectively. The results showed that PMF was a reliable model for source apportionment in HCMC. Traffic activities were the main sources of BTEX. Besides, industrial activities also contributed to BTEX emissions, especially the location near the industrial park. The majority of BTEXs at the To Hien Thanh sampling site come from traffic sources accounting for 56.2%. Activities from traffic and photochemical reactions (42.7%) and industrial sources (40.5%) were the main sources affecting BTEX emissions at the sampling site of Tan Binh Industrial Park. This study can be used as a reference for mitigation solutions to reduce the BTEX emission in HCMC.

Association between ambient BTEX mixture and neurological hospitalizations: A multicity time-series study in Taiwan

BACKGROUND

Benzene, toluene, ethylbenzene, and xylenes, collectively known as BTEX, are hazardous chemical mixtures, and their neurological health effects have not been thoroughly evaluated. We examined the association between BTEX exposure and neurological hospital admissions.

METHODS

This was a multicity time-series study conducted in five major Taiwanese cities. Daily hospital admission records for diseases of the nervous system from January 1, 2016, to December 31, 2017, were collected from the National Health Insurance Research Database. Ambient BTEX and criteria pollutant concentrations and weather factors were collected from Photochemical Assessment Monitoring Stations. We applied a Poisson generalized additive model (GAM) and weighted quantile sum regression to calculate city-specific effect estimates for BTEX and conducted a random-effects meta-analysis to pool estimates.

RESULTS

We recorded 68 neurological hospitalizations per day during the study period. The daily mean BTEX mixture concentrations were 22.5 µg/m3, ranging from 18.3 µg/m3 in Kaohsiung to 27.0 µg/m3 in Taichung, and toluene (13.6 µg/m3) and xylene (5.8 µg/m3) were the dominant chemicals. Neurological hospitalizations increased by an average of 1.6 % (95 % CI: 0.6-2.6 %) for every interquartile range (15.8 µg/m3) increase in BTEX at lag 0 estimated using a GAM model. A quartile increase in the weighted sum of BTEX exposure was associated with a 1.7 % (95 % CI: 0.6-2.8 %) increase in daily neurological hospitalizations.

CONCLUSION

We found consistent acute adverse effects of BTEX on neurological hospitalizations in Taiwan, with toluene and xylene as the dominant chemicals. These findings aid the development of more targeted public health interventions.

Evaluation of different composting systems on an industrial scale as a contribution to the circular economy and its impact on human health

Due to the production of volatile organic compounds (VOCs), large-scale composting can cause air pollution and occupational health issues. Due to this, it is necessary to determine if the amount generated poses a health risk to plant workers, which can be a starting point for those in charge of composting plant facilities. As a result, the goal of this work is to conduct a thorough analysis of both the physicochemical features and the VOC generation of three large-scale systems. For ten weeks, the three different composting plants were monitored weekly, and VOC identification and quantification were performed using GC-MS gas chromatography. It has been observed that the biggest risk related with VOC formation occurs between the fourth and fifth weeks, when microbial activity is at its peak. Similarly, it has been demonstrated that xylenes and toluene are the ones that are produced in the greatest quantity. Finally, after ten weeks of processing, it was discovered that the material obtained complies with the regulations for the sale of an amendment.Implications: The evaluation and monitoring of the composting processes at an industrial scale is very important, due to the implications they bring. VOCs are produced by the operation of composting facilities with substantial amounts of solid waste, such as the companies in this study. These may pose a health risk to those working in the plants; thus, it is critical to understand where the VOCs occur in the process in order to maintain workers' occupational health measures. This form of evaluation is rare or nonexistent in Colombia, which is why conducting this type of study is critical, as it will provide crucial input into determining when the highest levels of VOC generation occur. These are the ones that may pose a risk at some point, but with proper occupational safety planning, said risk may be avoided. This work has evaluated three composting systems, with different types of waste and mixtures. According to reports, while composting systems continue to produce VOCs and their generation is unavoidable, the potential risk exists only within the plant. These findings can pave the way for the implementation of public policies that will improve the design and operation of composting plants. There is no specific legislation in Colombia for the design and execution of this sort of technology, which allows the use of organic waste.

A low-cost internal standard loader for solid-phase sorbing tools

Solid-phase sorption is widely used for the analysis of gaseous specimens as it allows at the same time to preconcentrate target analytes and store samples for relatively long periods. The addition of internal standards (ISs) in the analytical workflow can greatly reduce the variability of the analyses and improve the reliability of the protocols. In this work, we describe the development and testing of a portable system for the reliable production of gaseous mixture of8D-Toluene in a 1L Silonite canister as well as its reproducible loading into solid-phase sorbing tools as ISs. The portable system was tested using needle trap microextraction, solid-phase extraction, and thin-film microextraction techniques commonly employed for the analysis of gaseous samples. Even though our specific interest is in breath analysis, the system can also be used for the collection of any kind of gaseous specimen. A microcontroller allows the fine control of the sampling flow by a digital mass flow controller. Flow rate and sample volume could be set either through a rotary encoder mounted onto the control board or through a dedicated android app. The variability of the airflow is in the range 5-200 ml min-1and it is lower than 1%, whereas the variability of the IS (8D-Toluene) concentration dispensed over time by the loader measured by selected-ion flow-tube mass spectrometry (MS) is <3%. This combination resulted in intra- and inter-day precision of the amount loaded in the sorbent tools lower than 15%. No carry-over was detected in the loader after the delivery of the8D-Toluene measured by gas chromatography-MS. The8D-Toluene concentration in the canister was stable for up to three weeks at room temperature.

BTEX in Ambient Air of Zarand, the Industrial City in Southeast of Iran: Concentration, Spatio-temporal Variation and Health Risk Assessment

The existence of several industries in Zarand, a city in Southeastern Iran, caused challenges for the residents about air pollutants and associated health effects. In the present study, the concentration of benzene, toluene, ethylbenzene, and xylene (BTEX), spatio-temporal distribution and related health risks were evaluated. Passive samplers were used to collect 30 samples in the over the hot and cold periods in 2020. The ordinary Kriging method was used to predict the spatio-temporal distribution of BTEXs. Also, the Monte Carlo simulation was used to evaluate the related carcinogenic and non-carcinogenic risks of BTEX for adults. The ranking of mean concentration of overall toluene, xylene, ethylbenzene, and benzene followed as 82.49 ± 26.86, 30.91 ± 14.04, 4.75 ± 3.28, and 0.91 ± 0.18 µg/m3, respectively. The mean value of lifetime carcinogenic risk (LTCR) for residents related to benzene was 7.52 × 10- 6, indicating a negligible carcinogenic risk for them. Furthermore, the ranking of non-carcinogenic risk calculated through hazard quotient (HQ) for investigated BTEX compounds followed as xylene > benzene > toluene > ethylbenzene over the hot period and xylene > toluene > ethylbenzene over the cold period which all points had HQ < 1. Additionally, according to the findings of the sensitivity analysis, the concentration of benzene was the main contributor in increasing the carcinogenic risk. According to our results, it can be stated that the existence of several industries in the study area could not possibly occur the significant carcinogenic and non-carcinogenic risks to the adults residents in the study period. Human studies are recommended to determine definite results.

Emission characteristics of benzene series in FCC flue gas

Benzene series are considered as air pollutants in refineries. However, the emissions of benzene series in fluid catalytic cracking (FCC) flue gas are poorly understand. In this work, we conduct stack tests on three typical FCC units. Benzene series, including benzene, toluene, xylene and ethyl benzene, are monitored in the flue gas. It shows that the coking degree of the spent catalysts affect the emissions of benzene series significantly, and there are four kinds of carbon-containing precursors in the spent catalyst. A fixed-bed reactor is used to conduct the regeneration simulation experiments, and the flue gas is monitored by TG-MS and FTIR. The emissions of toluene and ethyl benzene are mainly emitted in the early and middle stage of the reaction (250-650 °C), while the emission of benzene is mainly detected in the middle and late stage of the reaction (450-750 °C). Xylene group is not detected in the stack tests and regeneration experiments. Higher emissions of benzene series are released from the spent catalyst with lower C/H ratio during regeneration process. With the increase of oxygen content, the emissions of benzene series decrease, and the initial emission temperature is advanced. These insights can improve the refinery's awareness and control of benzene series in the future.

Occupational exposure to VOCs and carbonyl compounds in beauty salons and health risks associated with it in South Korea

Long-term exposure to volatile organic compounds (VOCs) and carbonyl compounds in beauty products may adversely impact the health of beauty salon technicians. Previous studies have focused on assessing indoor air concentrations of chemicals, such as benzene and toluene, and not on personal exposure concentrations. This study measured the indoor and personal exposure concentrations of VOCs and carbonyl compounds in fifty-three beauty salons in Korea. Non-carcinogenic and carcinogenic risks and sensitivity were analyzed using the Monte Carlo simulation technique. The indoor and personal exposure concentrations of acetone were 82.24 µg/m³ and 104.97 µg/m³, respectively, the highest among all measured chemicals. Beauty salon technicians who experienced adverse health effects had significantly higher concentrations of acetone, benzaldehyde, and toluene than those who did not experience adverse health effects (p-value < 0.05). The average hazard quotients of formaldehyde and acetaldehyde were higher than the acceptable risk level (1), and the average cancer risks of formaldehyde exceeded the acceptable risk level (10^-6). Wearing personal protective equipment was the most efficient risk reduction strategy for reducing the non-cancer risks of acetaldehyde and formaldehyde and the carcinogenic risks of formaldehyde. The results of this study can be used as a basis for reducing exposure to VOCs and carbonyl compounds among salon technicians.

Level of BTEX in the Areas of Domestic Waste Incinerators in Northern Vietnam: A Comprehensive Assessment of Contamination, Composition and Human Health Risk

The trend of the treatment of solid domestic waste by the domestic waste incinerator system is an option to improve waste management and to reduce the negative impacts on the environment and human health. Benzene, toluene, ethylbenzene, and xylenes (o-, m- and p-) (BTEX) are toxic chemical environmental contaminants that are released from different sources such as the domestic waste incinerator system. To determine the concentration of BTEX in the ambient air from these incinerator areas, the research team conducted four sampling campaigns in April, June, September, and November 2021, with a total of 80 samples collected. Concentrations of benzene, toluene, (m,p)-xylenes, o- xylenes and ethylbenzene ranged from 4.53 to 36.75 µg/m³, from 16.29 µg/m³ to 125.36 µg/m³, from 2.82 µg/m³ to 31.45 µg/m³, from 1.42 µg/m³ to 25.61 µg/m³, from 1.32 µg/m³ to 10.79 µg/m³, respectively. As a result of the risk assessment, it was determined that the incinerator's exhaust gas caused secondary environmental damage, impacting the health of not only workers but also people living in nearby communities. On that basis, the article recommends applying a number of management measures to minimize the negative impacts of the operation of the solid waste incinerator on the environment and the health of the workers operating the incinerator.

Removal of a complex VOC mixture by potted plants-effects on soil microorganisms

Microorganisms in the soil of potted plants are important for removal of volatile organic compounds (VOCs) from indoor air, but little is known about the subject. The aim of this study was therefore to obtain a better understanding of the effect of VOCs on the microbial community in potted plants. Hedera helix was exposed to gasoline vapors under dynamic chamber conditions for 21 days and three main parameters were investigated. These were (1) removal of the target compounds heptane, 3-methylhexane, benzene, toluene, ethylbenzene, m,p-xylene, and naphthalene from the gasoline mixture; (2) toluene mineralization; and (3) bacterial abundance and bacterial community structure. H. helix was able to reduce the concentration of the target compounds in the continuously emitted gasoline by 25-32%, except for naphthalene, which was too low in concentration. The soil microcosm of gasoline exposed plants had for an initial 66 h increased toluene mineralization rate compared to the soil microcosm in the soil of plants exposed to clean air. Bacterial abundance was decreased in response to gasoline exposure while bacterial community structure was changed. The change in bacterial community structure was, however, different between the two experiments indicating that several taxonomic units can degrade gasoline components. Especially the genera Rhodanobacter and Pseudonorcardia significantly increased in abundance in response to gasoline vapors. Bauldia, Devosia, and Bradyrhizobium, on the other hand, decreased.

Multiphase migration and transformation of BTEX on groundwater table fluctuation in riparian petrochemical sites

Light non-aqueous phase liquids (LNAPL) are considered to be a composition-based risk, containing multiple chemical ingredients that release dissolved- and vapor-phase plumes. In dissolved form, there is a saturation-based risk as the water source expands, affecting groundwater aquifers on a larger scale in the aquifer. As a typical pollutant found in petrochemical contaminated sites, the migration and transformation of benzene, toluene, ethylbenzene, and o-xylene (BTEX) between gas, aqueous, and NAPL phases are distinctly affected by groundwater table fluctuation (GTF). BTEX multiphase migration and transformation pattern in a petrochemical factory at the riverside was simulated based on the TMVOC model in differentiating pollution distribution and interphase transformation under stable or fluctuating groundwater tables conditions. TMVOC model performed an excellent simulation effect on the migration and transformation of BTEX in GTF circumstances. In comparison with the stable groundwater table condition, the BTEX pollution depth under GTF increased by 0.5 m, the pollution area increased by 25%, and the total mass increased by 0.12 × 10² kg. In both cases, the mass reduction of NAPL-phase pollutants was more significant than the total mass reduction of pollutants, and GTF further promoted the mass conversion of NAPL-phase pollutants to water pollutants. Prominently, as the groundwater table rises, the GTF can correct for evacuation, and the transport flux of gaseous pollutants at the atmospheric boundary decreases with increasing transport distance. Furthermore, descended groundwater table will intensify the transmission flux of gaseous pollutants at the atmospheric boundary with the transmission range expanding, which can be harmful to human health on the surface due to gaseous pollutants entering into the air.

Theoretical Kinetic Isotope Effects in Establishing the Precise Biodegradation Mechanisms of Organic Pollutants

Compound-specific isotope analysis (CSIA) for natural isotope ratios has been recognized as a promising tool to elucidate biodegradation pathways of organic pollutants by microbial enzymes by relating reported kinetic isotope effects (KIEs) to apparent KIEs (AKIEs) derived from bulk isotope fractionations (ε_bulk). However, for many environmental reactions, neither are the reference KIE ranges sufficiently narrow nor are the mechanisms elucidated to the point that rate-determining steps have been identified unequivocally. In this work, besides providing reference KIEs and rationalizing AKIEs, good relationships have been explained by DFT computations for diverse biodegradation pathways with known enzymatic models between the theoretical isotope fractionations (ε_bulk^') from intrinsic KIEs on the rate-determining steps and the observed ε_bulk. (1) To confirm the mechanistic details of previously reported pathway-dependent CSIA, it includes isotope changes in MTBE biodegradation between hydroxylation by CYP450 and S_N2 reaction by cobalamin-dependent methyltransferase, the regioselectivity of toluene biodegradation by CYP450, and the rate-determining step in toluene biodegradation by benzylsuccinate synthase. (2) To yield new fundamental insights into some unclear biodegradation pathways, it consists of the oxidative function of toluene dioxygenase in biodegradation of TCE, the epoxidation mode in biodegradation of TCE by toluene 4-monooxygenase, and the weighted average mechanism in biodegradation of cDCE by CYP450.

Volatile organic compounds at a roadside site in Hong Kong: Characteristics, chemical reactivity, and health risk assessment

Volatile organic compounds (VOCs) and oxygenated VOCs (OVOCs) play important roles in atmospheric chemistry and are recognized as the major pollutants in roadside microenvironments of metropolitan Hong Kong, China. In this study, the ambient VOCs and OVOCs were intensively monitored at a roadside site in Hong Kong for one month during morning and evening rush hours. The emission characterizations, as well as ozone formation potentials (OFP) and hydroxyl radical (OH) loss rates (L_OH) were determined. Results from the campaign showed that the average concentrations of detected VOCs/OVOCs ranged from 0.21 to 9.67 ppb, and higher toluene to benzene (T/B) ratio was observed during evening sections due to the variation of fuel types in vehicle fleets and mix of additional emission sources in this site. On average, OVOCs had much higher concentrations than the targeted VOC species. Acetone, formaldehyde, and acetaldehyde were the three most abundant species, while formaldehyde showed the highest contributions to both OFP (32.20 %) and L_OH (16.80 %). Furthermore, potential health hazards with inhalation exposure to formaldehyde, acetaldehyde, propionaldehyde, methyl ethyl ketone (MEK), 1,3-butadiene, toluene, benzene, and acrylonitrile were found. These results reveal that it is imperative to implement efficient control measures to reduce vehicle emissions for both primary and secondary pollutants and to protect both roadside workers and pedestrians.

In Situ Construction of Manganese Oxide Photothermocatalysts for the Deep Removal of Toluene by Highly Utilizing Sunlight Energy

The alternative use of electric energy by renewable energy to supply power for catalytic oxidation of pollutants is a sustainable technology, requiring a competent catalyst to realize efficient utilization of light and drive the catalytic reaction. Herein, in situ-synthesized manganese oxide heterostructure composites are developed through solvothermal reduction and subsequent calcination of amorphous manganese oxide (AMO). 95% of toluene conversion and 80% of CO₂ mineralization were achieved over amorphous manganese oxide calcined at 250 °C (AMO-250) under light irradiation, and catalyst stability was maintained for at least 40 h. Highly utilization of light energy, uniformly dispersed nanoparticles, large specific surface area, improved metal reducibility, and oxygen desorption and migration ability at low temperature contribute to the good catalytic oxidation activity of AMO-250. Light activated more lattice oxygen to participate in the reaction via the Mars-van Krevelen (MvK) mechanism, and traditional e^--h⁺ photocatalytic behavior exists over the AMO-250 heterostructure composite as an auxiliary degradation path. The reaction pathways of photothermocatalysis and thermocatalysis are close, except for the emergence of different copolymers, where light enhances the deep conversion of intermediates. A proof-of-concept study under natural sunlight has confirmed the feasibility of practical application in the photothermocatalytic degradation of pollutants.

Explication on distribution patterns of volatile organic compounds in petro-chemistry and oil refineries of China using a species-transport model and health risk assessment

Volatile organic compounds (VOCs) from industrial emissions have attracted great attention due to their negative effects on human, but there is lack of deterministic air quality model for VOC emissions. In this study, airborne VOCs from a typical petrochemical and oil refinery region, Lanzhou, Gansu province of China, were on-site measured. The regional pollution patterns were investigated using a species transport model and the health risks were evaluated. The spatial distribution of VOCs showed that 87.5 % of the airborne VOCs were benzene, toluene, ethylbenzene, and xylene having higher concentration (146 μg/m³) in the north direction oil refinery industrial areas. The concentrations of toluene and benzene were as high as 41.5 and 33.3 μg/m³ in the 4 km² area away from the petrochemical emission source, respectively, and the concentration of o-/m + p-xylene was up to 79.7 μg/m³. Based on the measured concentration data, the numerical results showed that the accumulation of high concentration of VOC species by mass transfer in the region is related to the atmospheric diffusion driven by downward-moving air over the valley areas. Non-carcinogenic risk assessments showed that airborne benzene exposure had acceptable hazard quotient of 0.185 for adults, which was 1.8 times of children's (0.102), whereas it was found that a high carcinogenic risk (>10^-4) from benzene in several sampling sites and diffuse distance become significant for carcinogenic risk. This study verified the effectiveness of VOC atmospheric diffusion model through a large number of on-site monitoring data, providing data support for model-based risk assessment.

An immobilization of aminopropyl trimethoxysilane-phenanthrene carbaldehyde on graphene oxide for toluene extraction and separation in water samples

A new functionalized Nano graphene with aminopropyl trimethoxysilane-phenanthrene-4-carbaldehyde (NGO@APTMS-PNTCA) as a novel adsorbent was used to extract toluene from water samples by the ultrasound-assisted dispersive solid-phase microextraction procedure (USA-D-SPME). So, 50 mg of NGO@APTMS-PNTCA adsorbent was added to water samples and sonicated for 20 min. After toluene extraction, the NGO@APTMS-PNTCA adsorbent separated from the liquid phase with a Whatman membrane filter (200 nm). Then, the toluene was back-extracted from the adsorbent by 2.0 mL of the acetone/ethanol (1:1, eluent) at 25 °C. Due to the physical properties and structure of toluene, fluorobenzene was used as an internal standard. Finally, the toluene values were measured by a gas chromatography-flame ionization detector (GC-FID). In optimized conditions, the limit of detection (LOD), the working range (WR), and the enrichment factor (EF) were obtained at 2.5 μg L^-1, 0.01-1.2 mg L^-1, and 9.63, respectively (MRSD% = 3.38). Also, the limit of quantification (LOQ) 10 μg L^-1 and extraction recovery of more than 95% was efficiently achieved for toluene. Standard additions of toluene to blank solutions had high recoveries between 95.2% and 104.5% with a relative standard deviation (RSD%) of 0.27-5.2. The absorption capacities of NGO and NGO@APTMS-PNTCA adsorbents for toluene extraction were obtained at 32.8 mg g^-1 and 154.9 mg g^-1, respectively. The USA-D-SPME method was validated by spiking the standard concentrations of toluene. The proposed method demonstrated relevant and suitable statistical results with high accuracy and precision for toluene extraction by a novel adsorbent synthesis.

PM2.5 chemical composition and health risks by inhalation near a chemical complex

Particulate matter (PM_2.5) samples were collected in the vicinity of an industrial chemical pole and analysed for organic and elemental carbon (OC and EC), 47 trace elements and around 150 organic constituents. On average, OC and EC accounted for 25.2% and 11.4% of the PM_2.5 mass, respectively. Organic compounds comprised polycyclic aromatic hydrocarbons (PAHs), alkylated PAHs, anhydrosugars, phenolics, aromatic ketones, glycerol derivatives, aliphatic alcohols, sterols, and carboxyl groups, including aromatic, carboxylic and dicarboxylic acids. Enrichment factors > 100 were obtained for Pb, Cd, Zn, Cu, Sn, B, Se, Bi, Sb and Mo, showing the contribution of industrial emissions and nearby major roads. Principal component analysis revealed that vehicle, industrial and biomass burning emissions accounted for 66%, 11% and 9%, respectively, of the total PM_2.5-bound PAHs. Some of the detected organic constituents are likely associated with plasticiser ingredients and thermal stabilisers used in the manufacture of PVC and other plastics in the industrial complex. Photooxidation products of both anthropogenic (e.g., toluene) and biogenic (e.g., isoprene and pinenes) precursors were also observed. It was estimated that biomass burning accounted for 13.8% of the PM_2.5 concentrations and that secondary OC represented 37.6% of the total OC. The lifetime cancer risk from inhalation exposure to PM_2.5-bound PAHs was found to be negligible, but it exceeded the threshold of 10^-6 for metal(loi)s, mainly due to Cr and As.

Integrated Sustainable Management of Petrochemical Industrial Air Pollution

The emission inventory, emission factor, and spatial concentration distribution of volatile organic compounds (VOCs) from a petrochemical industry (aromatics plant) were intensively evaluated in this study to elucidate the potential sources of BTX emission and their contribution to ambient concentrations. Five emission groups were quantified through direct measurement and emission models. These data were then used as input for the AERMOD dispersion model for the source apportionment analysis. The source to ambient contribution analysis revealed that a wastewater treatment facility and organic liquid storage tank were major contributors accounting for about 20.6-88.4% and 10.3-75.4% to BTX environmental concentrations, respectively. The highest annual ambient concentrations of benzene (B), toluene (T), and xylenes (X) were predicted as 9.0, 2.8, and 57.9 µg/m³ at the fence line of the plant boundary, respectively. These findings assist policymakers in prioritizing the appropriate control measures to the right source by considering not just the amount released but also their contribution to ambient concentrations. This study suggested that the wastewater treatment unit should be changed to the closed system which will benefit reduction in its emission (45.05%) as well as effectively minimizing ambient VOC concentration by 49.96% compared to its normal operation.

Characteristics and sources of ambient Volatile Organic Compounds (VOCs) at a regional background site, YRD region, China: Significant influence of solvent evaporation during hot months

Continuous measurement of 98 volatile organic compounds (VOCs) was conducted during 2017-2019 at a regional background site (Shanxi) located at northeast of Zhejiang Province, YRD region, China. The average concentration of total VOCs (TVOCs) was 25.4 ± 18.4 ppbv, and an increasing trend (+12.2 %) was observed. Alkanes were the most abundant VOC group among all seasons, accounting for 43.5 % of TVOCs. Oxygenated VOCs (OVOCs), aromatics, halides and alkenes contributed 15.9 %, 15.7 %, 11.7 % and 10.3 % of TVOCs concentration, respectively. Biogenic VOCs (BVOCs) and OVOCs showed distinguished diurnal cycle from primary anthropogenic VOCs. Photochemical reactivity analysis based on ozone formation potential (OFP) and OH loss rate (L^OH) indicated that aromatics and alkenes were the most significant contributor, respectively. Toluene, xylene (m/p- and o-), ethene and propene were the largest contributor of annual OFP, with the mean OFP being 33.8 ± 44.3 μg·m^-3, 31.9 ± 32.1 μg·m^-3, 9.29 ± 11.4 μg·m^-3, 22.1 ± 21.3 μg·m^-3 and 12.8 ± 19.5 μg·m^-3, respectively. Seven sources were identified with positive matrix factorization (PMF): petrochemical industry (13.8 %), biogenic emission (1.0 %), solvent usage-toluene (16.9 %), vehicular exhaust (43.8 %), Integrated circuits industry (3.8 %), solvent usage-C8 aromatics (10.9 %), and gasoline evaporation (9.8 %). Vehicular exhaust was the most significant source (43.8 %) during the whole measurement period. Solvent usage, petrochemical industry, and gasoline evaporation showed high temperature dependency. The integrated contribution of solvent usage and industrial processes were higher than vehicular exhaust during hot months. These sources also have higher chemical reactivities and can contribute more on O₃ formation. Our results are helpful on determining the control strategies aiming at alleviating O₃ pollution.

Synergistic Catalytic Oxidation of Typical Volatile Organic Compound Mixtures on Mn-Based Catalysts: Significant Promotion Effect and Reaction Mechanism

The miscellaneous volatile organic compounds (VOCs) in industrial flue gas streams usually demonstrate significant mutual inhibition effects, and the behavior of a particular VOC in mixtures is not clear, which hinders the application of catalytic technology. This study examines the catalytic oxidation and mixing effects of representative VOCs in industrial exhausts, consisting of acetone (AC), ethyl acetate (EA), and toluene (Tol), on common Mn-based catalysts (e.g., MnO₂, Mn₂O₃, LaMnO₃, and Mn₃O₄) by means of intrinsic activity evaluation, coadsorption, VOC temperature-programmed oxidation, in situ diffuse reflectance infrared Fourier transform spectroscopy, and gas chromatography-mass spectrometry. The results showed no inhibiting effect on the conversion of these VOCs when combusted together; instead, a significant mutual promotion effect was found, especially on Tol destruction, with a sharp decrease in the Tol T₅₀ from 214 to 158 °C on MnO₂. It is proposed for the first time that the addition of AC/EA in Tol combustion leads to the generation of o/m-methyl phenol, which changes the rate-determining step of the ring-opening process, thus elevating the conversion of Tol together with AC and EA in the mixture at low temperatures.

Exposures to volatile organic compounds, serum vitamin D, and kidney function: association and interaction assessment in the US adult population

The relationships of exposures to volatile organic compounds (VOCs) with vitamin D and kidney function remain unclear. Our analyses included 6070 adults from 2003 to 2010 survey cycles of the National Health and Nutrition Examination Survey to explore associations of six VOCs with serum vitamin D, albumin-to-creatinine ratio (ACR), and estimated glomerular filtration rate (eGFR). The results suggested that dibromochloromethane was positively associated with ACR, and chloroform was inversely associated with ACR. U-shaped associations of toluene, m-/p-xylene, bromodichloromethane, and 1,4-dichlorobenzene with ACR were observed. Toluene, m-/p-xylene, and 1,4-dichlorobenzene were associated with eGFR in U-shaped manners, while bromodichloromethane and chloroform were inversely associated with eGFR. Elevation in 1,4-dichlorobenzene was associated with decrease in vitamin D, while chloroform and m-/p-xylene were in U-shaped associations with vitamin D. VOCs mixture was U-shaped associated with ACR, inversely associated with eGFR, and inversely associated with vitamin D. Vitamin D was in a U-shaped association with ACR. Vitamin D significantly interacted with VOCs on the two kidney parameters. In the US adult population, exposures to VOCs were associated with kidney function and serum vitamin D level decline, and the serum vitamin D may have interaction effects with VOCs exposures on kidney function.

Evaluation of Biodegradation of BTEX in the Subsurface of a Petrochemical Site near the Yangtze River, China

The contamination of soil and groundwater with BTEX (benzene, toluene, ethyl benzene, and xylenes) is a common issue at petrochemical sites, posing a threat to the ecosystems and human health. The goal of this study was to evaluate the biodegradation of BTEX in the subsurface of a petrochemical site near the Yangtze River, thus providing scientific basis for bioremediation of the contaminated site. Both molecular analysis of field samples and microcosm study in the laboratory were performed for the evaluation. Soil and groundwater samples were collected from the site. Microcosms were constructed with inoculum from the soil and incubated anaerobically in the presence of nitrate, ferric oxide, manganese oxide, sulfate, and sodium bicarbonate, respectively. The initial concentration of each component of BTEX (benzene, toluene, ethyl benzene, o-xylene) was 4-5 mg/L. Actinobacteria was dominant in the highly contaminated soil, while Proteobacteria was dominant in the slightly contaminated soil and the groundwater. The relative abundances of Firmicutes, Spirochaetes, and Caldiserica were higher in the highly contaminated soil and groundwater samples compared to those in the corresponding slightly contaminated samples. The relative abundances of predicted functions, such as carbohydrate transport and metabolism, nucleotide transport and metabolism, coenzyme transport and metabolism, amino acid transport and metabolism, etc., in the highly contaminated soil and groundwater samples were higher than those in the corresponding slightly contaminated samples. In microcosms, biodegradations of BTEX occurred, and the first-order rate constants in the presence of various electron acceptors had the following order: sulfate (0.08-0.10/d) > sodium bicarbonate (0.07-0.09/d) > ferric oxide (0.04-0.06/d) > nitrate (0.03-0.05/d) > manganese oxide (0.01-0.04/d).

An Innovative Method for BTEX Emission Inventory and Development of Mitigation Measures in Developing Countries-A Case Study: Ho Chi Minh City, Vietnam

Benzene, toluene, ethylbenzene, and xylenes (BTEX) are carcinogenic pollutants. However, the average concentration in 1 h of some pollutants belonging to BTEX, such as benzene, in Ho Chi Minh City (HCMC) is higher than the national standard QCVN 06:2009/BTNMT by about ten times. This research is the first to calculate the emission of BTEX for developing countries on a city scale. This paper developed a method to calculate cold emission factors based on hot emission factors for BTEX. Five spreadsheets developed and calculated these cold emission factors for five vehicle categories. A comprehensive emission inventory (EI) for BTEX was conducted in HCMC to determine the cause of BTEX pollution. An innovative methodology with bottom-up and top-down combination was applied to conduct BTEX EI, in which the EMISENS model was utilized to generate the EI for road traffic sources, and the emission factors method was utilized for other emission sources. Among emission reasons, motorcycles contribute the highest to HCMC air pollution, responsible for 93%, 90%, 98.9%, and 91.5% of benzene, toluene, ethylbenzene, and xylene, respectively. Cars contributed 5%, 6%, 0.8%, and 6.5% of benzene, toluene, ethylbenzene, and xylene, respectively. For LDVs, the emission from benzene, toluene, ethylbenzene, and xylene accounted for 1%, 2%, 0.2%, and 1.9%. The major reasons for point sources were metal production, which had 1%, 2%, and 0.1% for benzene, toluene, ethylbenzene, and xylenes emissions. The area source had a minority emission of total BTEX in Ho Chi Minh City. Our findings can be used to invest in the most significant sources to reduce BTEX in HCMC. Our approach can be applied in similar urban areas in BTEX EI. This research also developed nine measures to reduce BTEX in HCMC for human health protection.

A wide range of toxic VOCs measured by dual-sorbent passive sampling with validation by field online measurements

This study modified a passive sampling technique similar to the US EPA Method 325 A/B method but extended to include more toxic volatile organic compounds (VOCs) under varied climate conditions to enhance field applicability. A mixing chamber was built to determine uptake rates (Us) for the target compounds. It was found that the Us of 27 air toxics previously reported in the literature agreed reasonably well with our findings within 18%, thus proving the chamber's integrity. To broaden the compound coverage, both Carbopack X and Carboxen 569 were studied for a suite of toxic VOCs to meet stringent quality control (QC) criteria of correlation coefficients (R-square), method detection limits (MDL), back diffusion (BD), storage stability, as well as a wide range of climate conditions in temperature and humidity. After excluding the species that failed to pass any of the QC criteria, Carbopack X was found to fit 50 air toxics, whereas Carboxen 569 held 37. After excluding the overlapped species, 61 toxic VOCs can be determined with robust Us for a broad range of climate conditions when the two sorbents are used in pairs. A one-week field measurement was conducted to compare with the online thermal desorption gas chromatography-mass spectrometry (TD-GC-MS) with hourly data resolution. The field passive sampling showed comparable results to the means of the online hourly measurements, despite the high variability of selected target compounds, such as toluene from 0.3 ppbv as the 5th percentile to the maximum of about 80 ppbv. Passive sampling clearly demonstrated the ability to smooth out concentration variability and thus the time-averaging strength of toxic VOCs, revealing its ideal role as an exposure monitor over time. The passive sampling method can be more desired than active sampling or online methods when the aim is simply the knowledge of prolonged time-averaged concentrations.