Oxidation characteristics and degradation potential of a dye-decolorizing peroxidase from Bacillus amyloliquefaciens for crystal violet dye

Biodegradation and Decolorization of Crystal Violet Dye by Cocultivation with Fungi and Bacteria

Microbial degradation of dyes is vital to understanding the fate of dyes in the environment. In this study, a fungal strain A-3 and a bacterial strain L-6, which were identified as Aspergillus fumigatus and Pseudomonas fluorescens, respectively, had been proven to efficiently degrade crystal violet (CV) dye. The decolorization of CV dye by fungal and bacterial cocultivation was investigated. The results showed that the decolorization rate of cocultures was better than monoculture (P. fluorescens in L-6 (PF), and that of A. fumigatus A-3 (AF)). Furthermore, enzymatic analysis further revealed that Lac, MnP, Lip, and NADH-DCIP reductases were involved in the biodegradation of CV dyes. UV-visible spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and gas chromatography-mass spectrometry (GC-MS) were used to examine the degradation products. GC-MS analysis showed the presence of 4-(dimethylamino) benzophenone, 3-dimethylaminophenol, benzyl alcohol, and benzaldehyde, indicating that CV was degraded into simpler compounds. The phytotoxicity tests revealed that CV degradation products were less toxic than the parent compounds, indicating that the cocultures detoxified CV dyes. As a result, the cocultures are likely to have a wide range of applications in the bioremediation of CV dyes.

Heterogeneous biocatalytic system for effective decolorization of textile dye effluent

The current physicochemical methods for decolorizing toxic synthetic dyes are not sustainable to halt the environmental damage as they are expensive and often produce concentrated sludge, which may lead to secondary disposal problems. Biocatalysis (microbes and/or their enzymes) is a cost-effective, versatile, energy-saving and clean alternative. The most common enzymes involved in dye degradation are laccases, azoreductases and peroxidases. Toxic dyes could be converted into less harmful byproducts through the combined action of many enzymes or the utilization of whole cells. The action of whole cells to treat dye effluents is either by biosorption or degradation (aerobic or anaerobic). Using immobilized cells or enzymes will offer advantages such as superior stability, persistence against harsh environmental conditions, reusability and longer half-lives. This review envisages the recent strategies of immobilization and bioreactor considerations with the immobilized system as the effective treatment of textile dye effluents. Packed bed reactors are the most popular heterogeneous biocatalytic reactors for dye decolorization due to their efficiency and cost-effectiveness.

Tunable sulphur doping on CuFe2O4 nanostructures for the selective elimination of organic dyes from water

In this work, sulphur doped copper ferrites (S-CuFe₂O₄) photocatalysts were successfully synthesized for the first time using the facile hydrothermal method. The as-synthesized photocatalysts were characterized through XRD, Raman, TGA, FT-IR, UV-Vis-DRS, SEM, EDX and PL techniques. The results revealed that doping with sulphur has been found to be a suitable alternative that causes strain in the lattices as anions replace the oxygen from the CuFe₂O₄ nanostructures. Due to sulphur dopants, photocatalysts are able to efficiently trap and transfer the photoinduced charges, which readily suppress charge recombination. A UV-Vis spectrophotometer was used to monitor the degradation of selective toxic organic dyes (RhB, CR, MO, and CV) in aqueous media. The dye degradation results provide evidence for the surprisingly superior performance of S-CuFe₂O₄ over pristine CuFe₂O₄. On the basis of its efficiencies, this work can be assigned as an excellent candidate for photocatalysis science.

Zinc-doped and biochar support strategies to enhance the catalytic activity of CuFe2O4 to persulfate for crystal violet degradation

Sulfate radicals-based Fenton-like technology has placed more emphasis on effectively dealing with the threat of dye wastewater. In this work, the Zn-doped CuFe₂O₄@biochar composite (Cu_0.9Zn_0.1Fe₂O₄@BC) was prepared through the convenient sol-gel pyrolysis process and applied as heterogeneous persulfate (PS) activator for crystal violet (CV) degradation. The crystal morphology and physicochemical properties of Cu_0.9Zn_0.1Fe₂O₄@BC were investigated by scanning electron microscope (SEM), X-ray diffractometer (XRD), vibrating sample magnetometer (VSM), Brunauer-Emmett-Teller method (BET), and X-ray photoelectron spectroscopy (XPS). The morphology of the catalyst changed before and after Zn doping. The crystallite size, lattice constant, saturation magnetization, and oxygen vacancy content increased after doping Zn. Compared with CuFe₂O₄@BC, the CV degradation efficiency of Cu_0.9Zn_0.1Fe₂O₄@BC activating PS increased from 87.7 to 96.9%, and the corresponding reaction rate constant increased by about 3.69 times. The effect of experimental conditions was systematically studied on the degradation progress. The degradation efficiency of CV was 91% after five times cycle experiments. Multiple experiments indicated that SO₄^•-, •OH and O₂^•- predominated for CV degradation. The degradation mechanism of CV in the Cu_0.9Zn_0.1Fe₂O₄@BC/PS system involved both free radical (SO₄^•-, •OH and O₂^•-) and non-free radical pathways (electron transfer). The possible degradation pathways were investigated according to the ultra-performance liquid chromatography mass spectrometry (UPLC-MS) analysis of degradation intermediates. The result showed that Cu_0.9Zn_0.1Fe₂O₄@BC have an excellent catalyst performance, which provides a new strategy for improving catalytic activity.

Synthesis of cross-linked magnetic chitosan beads immobilised with bacteria for aerobic biodegrading benzophenone-type UV filter

Bacterial immobilisation is a technique by which bacteria are embedded into or adsorbed onto a carrier material thereby increasing bacterial tolerance to harsh environments. This technique can be used to enhance bacterial activity and to degrade pollutants. Immobilised bacterial beads that contain nanomagnetic particles allow bead recycling and reuse. In this study, our objective was to produce cross-linked nanomagnetic chitosan beads (MCBs) for the biodegradation of benzophenone-type UV filter chemicals such as 2,4-dihydroxybenzophenone (BP-1) and oxybenzone (BP-3). We found that the optimal concentration for creating these MCBs to be 1.2% by weight chitosan and 10% by weight nano-magnetite. We selected and isolated six benzophenone-n (BPs)-biodegrading bacteria identified to be various Pseudomonas spp., a Gordonia sp., and Rhodococcus zopfii; these were used to create MCBs that were able to effectively biodegrade BP-1 or BP-3 as a sole carbon source. Both BPs were effectively biodegraded and mineralised over 8 days in the presence of the selected MCB-immobilised bacterial strains. The highest pseudo-first-order constant rates for BP biodegradation were 8.7 × 10^-3 h^-1 for BP-1 (strain BP1-D) and 1.02 × 10^-3 h^-1 for BP-3 (strain BP3-1). The mechanical strength of the MCBs was measured to be above 90% based on recovered weight. The MCBs released their bacteria at rates in the range of 10⁴-10⁵ CFU/day. We also determined the pathway through which the BPs were being aerobically biodegraded based on the GC/MS profiles of the intermediates. Our findings provide a novel strategy for treating BPs via the use of reusable and recyclable MCBs that are cheap, easy and fast to synthesise.

Evaluation of application potential of dye-decolorizing peroxidase from Bacillus amyloliquefaciens in bioremediation of paper and pulp mill effluent

Pulp and paper mill effluent is rich in recalcitrant and toxic pollutants compounds and causes pollution. To find an efficient biocatalyst for the treatment of effluent, a dye-decolorizing peroxidase from Bacillus amyloliquefaciens MN-13, which is capable of degrading lignin, was used for the bioremediation of paper and pulp mill effluent. The dye-decolorizing peroxidase from Bacillus amyloliquefaciens (BaDyP) exhibited high-redox potential to 2, 2′-azinobis (3-ethylbenzothiazoline- 6-sulfonic acid) ammonium salt (ABTS), veratryl alcohol, Mn²⁺, reactive blue 19, reactive black 5 and lignin dimer guaiacylglycerol-beta-guaiacyl ether (GGE). When GGE was used as substrate, BaDyP broke β-O-4 bond of GGE and then oxidize Cα to generate vanillin. The K_m values for ABTS and veratryl alcohol were 2.19 mm and 0.07 mm, respectively. The V_max for ABTS and veratryl alcohol were 1.8 mm/min and 14.12 mm/min, respectively. The BaDyP-mediated treatment of pulp and paper mill effluent led to significant reduction of chemical oxygen demand (COD) and color. When 5% (v/v) of effluent was treated with BaDyP for 12 h at 30°C and pH 2, the removal of COD, color, and lignin was achieved at 82.7, 80.2, and 78.20%, respectively. In detoxification assay, the seeds of Vigna unguiculata grown in treated effluent showed a significant increase in germination rate from 66.7% (untreated effluent) to 90%, and in radicle length from 0.68 cm (untreated effluent) to 1.26 cm, respectively. In the meanwhile, the inhibition of Escherichia coli and Bacillus subtilis by the treated effluent reduced significantly as compared to untreated effluent, indicating high detoxification performance of BaDyP for the treatment of pulp and paper mill effluent. The findings suggest that BaDyP is a potential catalyst for bioremediation of pulp and paper mill effluent, as it is effective in substantial lowering of pollutants load as well as reduces COD, color, and toxicity of effluent.