Enzyme-functionalized magnetic framework composite fabricated by one-pot encapsulation of lipase and Fe3O4 nanoparticle into metal–organic framework

Functionalized Ionic Liquids-Modified Metal-Organic Framework Material Boosted the Enzymatic Performance of Lipase

The development of immobilized enzymes with high activity and stability is critical. Metal-organic frameworks (MOFs) have attracted much academic and industrial interest in the field of enzyme immobilization due to their unique properties. In this study, the amino-functionalized ionic liquid (NIL)-modified metal-organic framework (UiO-66-NH2) was prepared to immobilize Candida rugosa lipase (CRL), using dialdehyde starch (DAS) as the cross-linker. The results of the Fourier transform infrared (FT-IR) spectra, X-ray powder diffraction (XRD), and scanning electronic microscopy (SEM) confirmed that the NIL was successfully grafted to UiO-66-NH2. The CRL immobilized on NIL-modified UiO-66-NH2 (UiO-66-NH2-NIL-DAS@CRL) exhibited satisfactory activity recovery (79.33%), stability, reusability, and excellent organic solvent tolerance. The research results indicated that ionic liquid-modified UiO-66-NH2 had practical potential for application in enzyme immobilization.

Novel biocatalysts based on enzymes in complexes with nano- and micromaterials

In today's world, there is a wide array of materials engineered at the nano- and microscale, with numerous applications attributed to these innovations. This review aims to provide a concise overview of how nano- and micromaterials are utilized for enzyme immobilization. Enzymes act as eco-friendly biocatalysts extensively used in various industries and medicine. However, their widespread adoption faces challenges due to factors such as enzyme instability under different conditions, resulting in reduced effectiveness, high costs, and limited reusability. To address these issues, researchers have explored immobilization techniques using nano- and microscale materials as a potential solution. Such techniques offer the promise of enhancing enzyme stability against varying temperatures, solvents, pH levels, pollutants, and impurities. Consequently, enzyme immobilization remains a subject of great interest within both the scientific community and the industrial sector. As of now, the primary goal of enzyme immobilization is not solely limited to enabling reusability and stability. It has been demonstrated as a powerful tool to enhance various enzyme properties and improve biocatalyst performance and characteristics. The integration of nano- and microscale materials into biomedical devices is seamless, given the similarity in size to most biological systems. Common materials employed in developing these nanotechnology products include synthetic polymers, carbon-based nanomaterials, magnetic micro- and nanoparticles, metal and metal oxide nanoparticles, metal-organic frameworks, nano-sized mesoporous hydrogen-bonded organic frameworks, protein-based nano-delivery systems, lipid-based nano- and micromaterials, and polysaccharide-based nanoparticles.

Immobilized lipase for sustainable hydrolysis of acidified oil to produce fatty acid

Acidified oil is obtained from by-product of crops oil refining industry, which is considered as a low-cost material for fatty acid production. Hydrolysis of acidified oil by lipase catalysis for producing fatty acid is a sustainable and efficient bioprocess that is an alternative of continuous countercurrent hydrolysis. In this study, lipase from Candida rugosa (CRL) was immobilized on magnetic Fe₃O₄@SiO₂ via covalent binding strategy for highly efficient hydrolysis of acidified soybean oil. FTIR, XRD, SEM and VSM were used to characterize the immobilized lipase (Fe₃O₄@SiO₂-CRL). The enzyme properties of the Fe₃O₄@SiO₂-CRL were determined. Fe₃O₄@SiO₂-CRL was used to catalyze the hydrolysis of acidified soybean oil to produce fatty acids. Catalytic reaction conditions were studied, including amount of catalyst, reaction time, and water/oil ratio. The results of optimization indicated that the hydrolysis rate reached 98% under 10 wt.% (oil) of catalyst, 3:1 (v/v) of water/oil ratio, and 313 K after 12 h. After 5 cycles, the hydrolysis activity of Fe₃O₄@SiO₂-CRL remained 55%. Preparation of fatty acids from high-acid-value by-products through biosystem shows great industrial potential.

A two-enzyme system in an amorphous metal-organic framework for the synthesis of D-phenyllactic acid

In this study, we synthesized an amorphous metal-organic framework by adjusting the concentration of precursors, and established a two-enzyme system consisting of lactate dehydrogenase (LDH) and glucose dehydrogenase (GDH), which successfully achieved coenzyme recycling, and applied it to the synthesis of D-phenyllactic acid (D-PLA). The prepared two-enzyme-MOF hybrid material was characterized using XRD, SEM/EDS, XPS, FT-IR, TGA, CLSM, etc. In addition, reaction kinetic studies indicated that the MOF-encapsulated two-enzyme system exhibited faster initial reaction velocities than free enzymes due to its amorphous ZIF-generated mesoporous structure. Furthermore, the pH stability and temperature stability of the biocatalyst were evaluated, and the results indicated a significant improvement compared to the free enzymes. Moreover, the amorphous structure of the mesopores still maintained the shielding effect and protected the enzyme structure from damage by proteinase K and organic solvents. Finally, the remaining activity of the biocatalyst for the synthesis of D-PLA reached 77% after 6 cycles of use, and the coenzyme regeneration still maintained at 63%, while the biocatalyst also retained 70% and 68% residual activity for the synthesis of D-PLA after 12 days of storage at 4 °C and 25 °C, respectively. This study provides a reference for the design of MOF-based multi-enzyme biocatalysts.

Magnetic metal-organic frameworks immobilized enzyme-based nano-biocatalytic systems for sustainable biotechnology

Nanobiocatalysts, in which enzyme molecules are integrated into/onto multifunctional materials, such as metal-organic frameworks (MOFs), have been fascinating and appeared as a new interface of nanobiocatalysis with multi-oriented applications. Among various nano-support matrices, functionalized MOFs with magnetic attributes have gained supreme interest as versatile nano-biocatalytic systems for organic bio-transformations. From the design (fabrication) to deployment (application), magnetic MOFs have manifested notable efficacy in manipulating the enzyme microenvironment for robust biocatalysis and thus assure requisite applications in several areas of enzyme engineering at large and nano-biocatalytic transformations, in particular. Magnetic MOFs-linked enzyme-based nano-biocatalytic systems offer chemo-regio- and stereo-selectivities, specificities, and resistivities under fine-tuned enzyme microenvironments. Considering the current sustainable bioprocesses demands and green chemistry needs, we reviewed synthesis chemistry and application prospects of magnetic MOFs-immobilized enzyme-based nano-biocatalytic systems for exploitability in different industrial and biotechnological sectors. More specifically, following a thorough introductory background, the first half of the review discusses various approaches to effectively developed magnetic MOFs. The second half mainly focuses on MOFs-assisted biocatalytic transformation applications, including biodegradation of phenolic compounds, removal of endocrine disrupting compounds, dye decolorization, green biosynthesis of sweeteners, biodiesel production, detection of herbicides and screening of ligands and inhibitors.

The application of a new recyclable photocatalyst γ-Fe2O3@SiO2@ZIF8-Ag in the photocatalytic degradation of amoxicillin in aqueous solutions

This pilot study synthesized the γ-Fe₂O₃@SiO₂@ZIF8-Ag nanocomposites via the hydrothermal method to study its potential use in amoxicillin degradation as a novel photocatalyst in aqueous solutions under visible light radiation. Various diagnostic methods were used to determine the morphology and functional structure of the photocatalyst, and the results confirmed its proper formation. Complete degradation of AMX was obtained at a pH of 5, catalyst dosage of 0.4 g/L, AMX concentration of 10 mg/L, and reaction time of 60 min. The efficiency of the degradation was diminished when anions were present in the reaction medium, and the order of their effect was SO₄^2- < Cl^- < NO₃^- < HCO₃^-. Biodegradability (BOD₅/COD ratio) increased from 0.20 to 0.68 after 120 min of photocatalytic treatment, with a COD removal of 87.54% and a TOC removal of 74.88%. Through the experimental trapping of electrons, we found the production of reactive species, such as hydroxyl radical (•OH), superoxide (O₂^•-), and holes (h⁺), in the photocatalysis reactor and that •OH was the predominant species in AMX photodegradation. Comparative experiments emphasized that the oxidation process occurs with the adsorption of pollutants on the surface of the catalyst, and the photocatalyst has the potential to be activated by various light sources, including visible light, UV light, and sunlight, with an AMX decomposition above 88%. The synthesized particles can be recovered after five consecutive cycles with minimal reduction in the degradation rate (< 4%). γ-Fe₂O₃@SiO₂@ZIF8-Ag can be considered a promising photocatalyst for use in AMX degradation due to its recyclability, easier activation by different light sources, and excellent mineralization.

Efficient resolution of 4-chlormandelic acid enantiomers using lipase@UiO-67(Zr) zirconium-organic frameworks in organic solvent

A new biocatalyst PCL@UiO-67(Zr) was successfully synthesized by immobilized lipases on metal-organic frameworks (MOFs) materials. Compare with free lipases, zirconium foundation organic framework material UiO-67(Zr) modification on immobilized lipases Pseudomonas cepacia lipase (PCL) great boosts their enantioselectivity in the kinetic resolution racemic 4-chloro-mandelic acid (4-ClMA) on the organic solvent. The acquired bio-composite PCL@UiO-67(Zr) was fully characterized by powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy, N₂ adsorption-desorption isotherm and aperture distribution map, and scanning electron microscopy (SEM). The catalytic performance of PCL@UiO-67(Zr), such as temperature, reaction time, and lipase quantity, were deeply explored. The experiment results showed resolution racemic 4-ClMA optimum conditions that 20 mmol/L of (R, S)-4-chloromandelic acid, 120 mmol/L vinyl acetate, 30-mg immobilized lipases PCL@UiO-67(Zr), 2 mL of MTBE, 500 rpm, and under the 55°C reaction 18 h. In this optimum conditions, c and ee_p could reach up to 47.6% and 98.7%, respectively.

One-pot encapsulation of lactate dehydrogenase and Fe3O4 nanoparticles into a metal-organic framework: A novel magnetic recyclable biocatalyst for the synthesis of D-phenyllactic acid

The main challenges in bio-catalysis of d-phenyllactic acid (D-PLA) are poor tolerance of lactate dehydrogenase (LDH) to harsh environmental conditions and inability to recycle the catalyst. A novel magnetic framework composite was prepared as solid support for the immobilization of enzymes via one-pot encapsulation in this study. LDH/MNPs@MAF-7 was synthesized by the one-pot encapsulation of both LDH and magnetic nanoparticles (MNPs) in MAF-7. The LDH/MNPs@MAF-7 showed stable biological activity for the efficient biosynthesis of D-PLA. The structure and morphology of LDH/MNPs@MAF-7 were systematically characterized by SEM, FT-IR, XRD, VSM, XPS, TGA and N₂ sorption. These indicated that LDH/MNPs@MAF-7 was successfully synthesized, exhibiting enhanced resistance to acid and alkali, temperature and organic solvents. Furthermore, the bio-catalyst could be separated easily using a magnet, and the reusability was once considerably expanded with 80% of enzyme activity last after eight rounds of recycling. Therefore, LDH/MNPs@MAF-7 could be used as a potential biocatalyst for the biosynthesis of D-PLA due to its good stability and recovery properties.

Laccase-functionalized magnetic framework composite enabled chlorophenols degradation, a potential remediation for fungicides residues in leather

Abstract

Chlorophenols, used as the fungicides in leather, are strictly limited in leather products. In this work, a metal–organic framework material, zeolitic metal azolate framework-7 (MAF-7), was first used to encapsulate laccase (Lac) to prepare MAF-7/Lac bio-composites with 98.5% immobilization yield. Afterward, Lac/MNP@MOM was formed by introducing the magnetic nanoparticles (MNPs) into the Lac@MOM. MAF-7 with better hydrophilicity and stronger pH buffering ability, exhibits good compatibility with laccase, which can reserve the activity of laccase after immobilization. Moreover, the porous structure of MAF-7 is favorable for the sufficient contact between laccase and substrates. Lac/MNP@MOM exhibited excellent activity when exposed to high temperature, extreme pH, and organic solvents, which also simplified complex recovery steps. Furthermore, the degradation rate of 2,4-dichlorophenol (2,4-DCP) could reach as high as 97% within 24 h by immobilized laccase, and after nine consecutive cycles of operation, enzyme activity could remain over 80%, which gives it the potential for practical applications.

Graphical abstract

Preparation and Characterization of Magnetic Metal–Organic Frameworks Functionalized by Ionic Liquid as Supports for Immobilization of Pancreatic Lipase

Enzymes are difficult to recycle, which limits their large-scale industrial applications. In this work, an ionic liquid-modified magnetic metal–organic framework composite, IL-Fe₃O₄@UiO-66-NH₂, was prepared and used as a support for enzyme immobilization. The properties of the support were characterized with X-ray powder diffraction (XRD), Fourier-transform infrared (FTIR) spectra, transmission electron microscopy (TEM), scanning electronic microscopy (SEM), and so on. The catalytic performance of the immobilized enzyme was also investigated in the hydrolysis reaction of glyceryl triacetate. Compared with soluble porcine pancreatic lipase (PPL), immobilized lipase (PPL-IL-Fe₃O₄@UiO-66-NH₂) had greater catalytic activity under reaction conditions. It also showed better thermal stability and anti-denaturant properties. The specific activity of PPL-IL-Fe₃O₄@UiO-66-NH₂ was 2.3 times higher than that of soluble PPL. After 10 repeated catalytic cycles, the residual activity of PPL-IL-Fe₃O₄@UiO-66-NH₂ reached 74.4%, which was higher than that of PPL-Fe₃O₄@UiO-66-NH₂ (62.3%). In addition, kinetic parameter tests revealed that PPL-IL-Fe₃O₄@UiO-66-NH₂ had a stronger affinity to the substrate and, thus, exhibited higher catalytic efficiency. The results demonstrated that Fe₃O₄@UiO-66-NH₂ modified by ionic liquids has great potential for immobilized enzymes.

Fabrication of pH-sensitive magnetic metal-organic framework for controlled-release of heparin

Heparin, the most widely used anticoagulant drug in the world today, suffers from the risk of overdose and a short serum half-life, limiting its clinical applications. Concerning the controlled, sustained, and targeted release of heparin, a delivery system was fabricated in this research using the layered composites of Fe₃O₄ magnetic particles and pH-sensitive metal-organic framework, Fe₃O₄@ZIF-8. The composite demonstrated a high loading capacity for the heparin, 66.8 mg/g. The composite had a saturation magnetization of 1.5 emu/g and thus owned a magnetic targeting function, i.e. drug can be centered at a certain point using an external magnetic field. The anticoagulant activity was assessed by monitoring their activated partial thromboplastin time. The results showed that the pH-responsive and sustained release of the heparin reduced the systemic adverse effects associated with high concentrations. Moreover, control over the dose exhibited excellent anticoagulant features with fewer side effects.

Immobilization of Interfacial Activated Candida rugosa Lipase Onto Magnetic Chitosan Using Dialdehyde Cellulose as Cross-Linking Agent

Candidarugosa lipase (CRL) was activated with surfactants (sodium dodecyl sulfate [SDS]) and covalently immobilized onto a nanocomposite (Fe₃O₄-CS-DAC) fabricated by combining magnetic nanoparticles Fe₃O₄ with chitosan (CS) using polysaccharide macromolecule dialdehyde cellulose (DAC) as the cross-linking agent. Fourier transform infrared spectroscopy, transmission electron microscope, thermogravimetric analysis, and X-ray diffraction characterizations confirmed that the organic–inorganic nanocomposite support modified by DAC was successfully prepared. Enzymology experiments confirmed that high enzyme loading (60.9 mg/g) and 1.7 times specific enzyme activity could be obtained under the optimal immobilization conditions. The stability and reusability of immobilized CRL (Fe₃O₄-CS-DAC-SDS-CRL) were significantly improved simultaneously. Circular dichroism analysis revealed that the active conformation of immobilized CRL was maintained well. Results demonstrated that the inorganic–organic nanocomposite modified by carbohydrate polymer derivatives could be used as an ideal support for enzyme immobilization.

Fabricating Bimetal Organic Material Capsules with a Commodious Microenvironment and Synergistic Effect for Glycosyltransferase

Metal-organic frameworks (MOFs) are rarely applied as solid supports in the enzymatic synthesis of oligosaccharides and polysaccharides, as glycosyltransferases are readily inactivated by traditional MOFs due to the poor compatibility and the limited mass transfer for complex carbohydrates in MOFs. Here, on the basis of the synthetic methods of zeolitic imidazolate framework-90 (ZIF-90), we prepared bimetal organic material (BMOM) microreactors that successfully encapsulated Pasteurella multocida heparosan synthase 2 (PmHS2), a critical glycosyltransferase in the enzymatic synthesis of heparin and heparan sulfate. The second metal ion introduced can increase the mesopores in the BMOM, stabilize the active pocket of glycosyltransferase, and facilitate the deprotonation of critical amino acid residues, Asp and Glu of PmHS2, to initiate the catalyzation. On the basis of this bimetallic microreactor, heparosan disaccharide, oligosaccharide, and polysaccharide are successfully prepared in quantitative yield, providing a viable BMOM-based immobilization strategy to simulate the physiological microenvironment for glycosyltransferase.

Rapid Screening of Lipase Inhibitors in Scutellaria baicalensis by Using Porcine Pancreatic Lipase Immobilized on Magnetic Core–Shell Metal–Organic Frameworks

As for ligand fishing, the current immobilization approaches have some potential drawbacks such as the small protein loading capacity and difficult recycle process. The core–shell metal–organic frameworks composite (Fe3O4-COOH@UiO-66-NH2), which exhibited both magnetic characteristics and large specific surface area, was herein fabricated and used as magnetic support for the covalent immobilization of porcine pancreatic lipase (PPL). The resultant composite Fe3O4-COOH@UiO-66-NH2@PPL manifested a high loading capacity (247.8 mg/g) and relative activity recovery (101.5%). In addition, PPL exhibited enhanced tolerance to temperature and pH after immobilization. Then, the composite Fe3O4-COOH@UiO-66-NH2@PPL was incubated with the extract of Scutellaria baicalensis to fish out the ligands. Eight lipase inhibitors were obtained and identified by UPLC-Q-TOF-MS/MS. The feasibility of the method was further confirmed through an in vitro inhibitory assay and molecular docking. The proposed ligand fishing technique based on Fe3O4-COOH@UiO-66-NH2@PPL provided a feasible, selective, and effective platform for discovering enzyme inhibitors from natural products.

Confining Natural/Mimetic Enzyme Cascade in an Amorphous Metal-Organic Framework for the Construction of Recyclable Biomaterials with Catalytic Activity

Integrating nanozymes with natural enzymes to form cascade reactions is one of the most promising ways to develop biocatalysts with versatile performance; however, the applicability of the cascade is typically hampered by the instability of enzymes and the hindrance of mass transfer in the host environment. Utilizing amorphous ZIF-90 (aZIF-90) as a host material, herein, we have reported a one-pot way to encapsulate glucose oxidase (GOx) and magnetic nanoparticles (MNP) to form GOx/MNP@aZIF-90. We reasoned that the amorphous structure of ZIF-90 not only provides a protected environment to confine the cascade reaction but also generates mesopores and internal voids to improve the performance of the enzymatic cascade. The catalytic activity of aZIF-90 was almost 4 times higher than that of crystalline composites, and the residual activity was higher than 80% after being stored for 9 days. This is the first time that GOx and MNP were simultaneously confined in aZIF-90 with mesopores, which suggested that an amorphous metal-organic framework is promising in the development of an enzymatic cascade.

Characterization of lipase from Candida rugosa entrapped in alginate beads to enhance its thermal stability and recyclability

Development of a simple method to efficiently immobilize lipase ensuring its stability and activity in water even at high temperatures.

Recent Advances in Emerging Metal- and Covalent-Organic Frameworks for Enzyme Encapsulation

Enzyme catalysis enables complex biotransformation to be imitated. This biomimetic approach allows for the application of enzymes in a variety of catalytic processes. Nevertheless, enzymes need to be shielded by a support material under challenging catalytic conditions due to their intricate and delicate structures. Specifically, metal-organic frameworks and covalent-organic frameworks (MOFs and COFs) are increasingly popular for use as enzyme-carrier platforms because of their excellent tunability in structural design as well as remarkable surface modification. These porous organic framework capsules that host enzymes not only protect the enzymes against harsh catalytic conditions but also facilitate the selective diffusion of guest molecules through the carrier. This review summarizes recent progress in MOF-enzyme and COF-enzyme composites and highlights the pore structures tuned for enzyme encapsulation. Furthermore, the critical issues associated with interactions between enzymes and pore apertures on MOF- and COF-enzyme composites are emphasized, and perspectives regarding the development of high-quality MOF and COF capsules are presented.

De Novo Approach to Encapsulating Biocatalysts into Synthetic Matrixes: From Enzymes to Microbial Electrocatalysts

Biocatalysts hold great promise in chemical and electrochemical reactions. However, biocatalysts are prone to inhospitable physiochemical conditions. Encapsulating biocatalysts into a synthetic host matrix can improve their stability and activity, and broaden their operational conditions. In this Review, we summarize the emerging de novo approaches to encapsulating biocatalysts into synthetic matrixes. Here, de novo means that embedding of biocatalysts and construction of matrixes take place simultaneously. We discuss the advantages and limitations of the de novo approach. On the basis of the nature of the biocatalysts and the synthetic frameworks, we specifically focus on two aspects: (1) encapsulation of enzymes (in vitro) in metal-organic frameworks and (2) encapsulation of microbial electrocatalysts (in vivo) on the electrode. For both cases, we discuss how the encapsulation improves biocatalysts' performance (stability, viability, activity, and etc.). We also highlight the benefit of encapsulation in facilitating the transport of charge carriers in microbial electrocatalysis.

Smart chemistry of enzyme immobilization using various support matrices - A review

The surface chemistry, pendent functional entities, and ease in tunability of various materials play a central role in properly coordinating with enzymes for immobilization purposes. Due to the interplay between the new wave of support matrices and enzymes, the development of robust biocatalytic constructs via protein engineering expands the practical scope and tunable catalysis functions. The concept of stabilization via functional entities manipulation, the surface that comprises functional groups, such as thiol, aldehyde, carboxylic, amine, and epoxy have been the important driving force for immobilizing purposes. Enzyme immobilization using multi-functional supports has become a powerful norm and presents noteworthy characteristics, such as selectivity, specificity, stability, resistivity, induce activity, reaction efficacy, multi-usability, high catalytic turnover, optimal yield, ease in recovery, and cost-effectiveness. There is a plethora of literature on traditional immobilization approaches, e.g., intramolecular chemical (covalent) attachment, adsorption, encapsulation, entrapment, and cross-linking. However, the existing literature is lacking state-of-the-art smart chemistry of immobilization. This review is a focused attempt to cover the literature gap of surface functional entities that interplay between support materials at large and enzyme of interest, in particular, to tailor robust biocatalysts to fulfill the growing and contemporary needs of several industrial sectors.

Sustainable One-Pot Immobilization of Enzymes in/on Metal-Organic Framework Materials

The industrial use of enzymes generally necessitates their immobilization onto solid supports. The well-known high affinity of enzymes for metal-organic framework (MOF) materials, together with the great versatility of MOFs in terms of structure, composition, functionalization and synthetic approaches, has led the scientific community to develop very different strategies for the immobilization of enzymes in/on MOFs. This review focuses on one of these strategies, namely, the one-pot enzyme immobilization within sustainable MOFs, which is particularly enticing as the resultant biocomposite Enzyme@MOFs have the potential to be: (i) prepared in situ, that is, in just one step; (ii) may be synthesized under sustainable conditions: with water as the sole solvent at room temperature with moderate pHs, etc.; (iii) are able to retain high enzyme loading; (iv) have negligible protein leaching; and (v) give enzymatic activities approaching that given by the corresponding free enzymes. Moreover, this methodology seems to be near-universal, as success has been achieved with different MOFs, with different enzymes and for different applications. So far, the metal ions forming the MOF materials have been chosen according to their low price, low toxicity and, of course, their possibility for generating MOFs at room temperature in water, in order to close the cycle of economic, environmental and energy sustainability in the synthesis, application and disposal life cycle.

Immobilization of the Peroxygenase from Agrocybe aegerita. The Effect of the Immobilization pH on the Features of an Ionically Exchanged Dimeric Peroxygenase

This paper outlines the immobilization of the recombinant dimeric unspecific peroxygenase from Agrocybe aegerita (rAaeUPO). The enzyme was quite stable (remaining unaltered its activity after 35 h at 47 °C and pH 7.0). Phosphate destabilized the enzyme, while glycerol stabilized it. The enzyme was not immobilized on glyoxyl-agarose supports, while it was immobilized albeit in inactive form on vinyl-sulfone-activated supports. rAaeUPO immobilization on glutaraldehyde pre-activated supports gave almost quantitative immobilization yield and retained some activity, but the biocatalyst was very unstable. Its immobilization via anion exchange on PEI supports also produced good immobilization yields, but the rAaeUPO stability dropped. However, using aminated agarose, the enzyme retained stability and activity. The stability of the immobilized enzyme strongly depended on the immobilization pH, being much less stable when rAaeUPO was adsorbed at pH 9.0 than when it was immobilized at pH 7.0 or pH 5.0 (residual activity was almost 0 for the former and 80% for the other preparations), presenting stability very similar to that of the free enzyme. This is a very clear example of how the immobilization pH greatly affects the final biocatalyst performance.