Biodegradation of bisphenol A by alginate immobilized Phanerochaete chrysosporium beads: Continuous cyclic treatment and degradation pathway analysis

Enhanced biodegradation of 2, 4-dichlorophenol in packed bed biofilm reactor by impregnation of polyurethane foam with Fe3O4 nanoparticles: Bio-kinetics, process optimization, performance evaluation and toxicity assessment

In this work, an effort has been made to enhance the efficacy of biological process for the effective degradation of 2, 4-dichlorophenol (2, 4-DCP) from wastewater. The polyurethane foam was modified with Fe3O4 nanoparticles and combined with polyvinyl alcohol, sodium alginate, and bacterial consortium for biodegradation of 2, 4-DCP in a packed bed biofilm reactor. The maximum removal efficiency of 2, 4-DCP chemical oxygen demand, and total organic carbon were found to be 92.51 ± 0.83 %, 86.85 ± 1.32, and 91.78 ± 1.24 %, respectively, in 4 days and 100 mg L-1 of 2, 4-DCP concentration at an influent loading rate of 2 mg L-1h-1 and hydraulic retention time of 50 h. Packed bed biofilm reactor was effective for up to four cycles to remove 2, 4-DCP. Growth inhibition kinetics were evaluated using the Edward model, yielding maximum growth rate of 0.45 day-1, inhibition constant of 110.6 mg L-1, and saturation constant of 62.3 mg L-1.

Biodegradation of Phenol Using the Indigenous Rhodococcus pyridinivorans Strain PDB9T NS-1 Immobilized in Calcium Alginate Beads

Phenolic compounds are the major contaminants identified from various industrial effluents, which pose an extreme threat to the environment. Therefore, investigating an effective technique to remove these toxic phenolic compounds from the contaminated environment is very essential. In the present investigation, batch tests were performed to assess the biodegradation of phenol using an indigenous Rhodococcus pyridinivorans strain PDB9T NS-1 encapsulated in a calcium alginate bead system. In order to improve the mechanical stability, silica was added to the cell-embedded Ca-alginate beads. The impact of experimental conditions such as contact time, pH, and initial phenol doses was investigated. The biodegradation of phenol was examined over a wide range of phenol, and the results showed that more than 99.6% degradation was achieved at an initial phenol dose of 1000 mg/L in 70 h at 30 °C. Among the various sorption isotherm tested, the Freundlich isotherm was the best fitted to the experimental data. This behavior indicated a multilayer biosorption process and was controlled by heterogeneous surface energy. Based on an intra-particle diffusion model, internal mass transfer or pore diffusion predominated over exterior mass transfer in controlling the entire phenol biosorption process. The biosorption of phenol onto the cell encapsulated in the Ca-alginate bead follows pseudo-first-order kinetics with a superior phenol biosorption capacity of 155 mg/g of Ca-alginate. Further stability study revealed that the bead could be recycled successfully without any substantial decline in phenol degradation efficiency, indicating that the immobilized microbe possesses exceptional operating stability.

Endophytic fungus from Handroanthus impetiginosus immobilized on electrospun nanofibrous membrane for bioremoval of bisphenol A

The current industrial and human activities scenario has accelerated the widespread use of endocrine-disrupting compounds (EDCs), which can be found in everyday products, including plastic containers, bottles, toys, cosmetics, etc., but can pose a severe risk to human health and the environment. In this regard, fungal bioremediation appears as a green and cost-effective approach to removing pollutants from water resources. Besides, immobilizing fungal cells onto nanofibrous membranes appears as an innovative strategy to improve remediation performance by allowing the adsorption and degradation to occur simultaneously. Herein, we developed a novel nanostructured bioremediation platform based on polyacrylonitrile nanofibrous membrane (PAN NFM) as supporting material for immobilizing an endophytic fungus to remove bisphenol A (BPA), a typical EDC. The endophytic strain was isolated from Handroanthus impetiginosus leaves and identified as Phanerochaete sp. H2 by molecular methods. The successful assembly of fungus onto the PAN NFM surface was confirmed by scanning electron microscopy (SEM). Compared with free fungus cells, the PAN@H2 NFM displayed a high BPA removal efficiency (above 85%) at an initial concentration of 5 ppm, suggesting synergistic removal by simultaneous adsorption and biotransformation. Moreover, the biotransformation pathway was investigated, and the chemical structures of fungal metabolites of BPA were identified by ultra-high performance liquid chromatography - high-resolution mass (UHPLC-HRMS) analysis. In general, our results suggest that by combining the advantages of enzymatic activity and nanofibrous structure, the novel platform has the potential to be applied in the bioremediation of varied EDCs or even other pollutants found in water resources.

Latest eco-friendly approaches for pesticides decontamination using microorganisms and consortia microalgae: A comprehensive insights, challenges, and perspectives

Pesticides are chemical compounds that are considered toxic to many organisms, including humans. Their elimination from polluted sites attracted the attention of Scientifics in the last decade; Among the various methods used to decontaminate pesticides from the environment, the microbial-algae consortium is a promising bioremediation technology, which implies several advantages as an eco-friendly process that generate biomass produced that could be valorized in the form of bioenergy, In this review, we will discuss the latest eco-friendly approaches using microorganisms to remediate sites contaminated by pesticides, and shows the ability of microbial, algae and their consortium to remove pesticides and the role of different enzymes in degradation processes.

RNA-sequencing analysis of bisphenol A biodegradation by white-rot fungus Phanerochaete sordida YK-624

Bisphenol A (BPA) is a representative example of an endocrine-disrupting chemical. It is one of the most produced chemical substances in the world, but it causes harmful effects in organisms, such that the effective degradation of BPA is critical. The white-rot fungus Phanerochaete sordida YK-624 has been shown to effectively degrade BPA under ligninolytic and non-ligninolytic conditions. However, it is still unclear what kinds of enzymes are involved in BPA degradation. To explore the mechanism of BPA degradation, the present study analysed the functional genes of P. sordida YK-624 using RNA-sequencing (RNA-Seq). Oxidation-reduction process and metabolic pathway were enriched under ligninolytic and non-ligninolytic conditions by Gene Ontology (GO) analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis. It is suggested that BPA might be used as a carbon source by P. sordida YK-624. Lignin peroxidase and cytochrome P450 were detected in upregulated differentially expressed genes (DEGs). The lignin-degrading enzyme lignin peroxidase and the intracellular cytochrome P450 system were involved in BPA degradation by P. sordida YK-624, respectively. Furthermore, quantitative real-time PCR (qPCR) was used to validate the reliability of the RNA-Seq results.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03298-w.

Advances in the application of immobilized enzyme for the remediation of hazardous pollutant: A review

Nowadays, ecofriendly, low-cost, and sustainable alternatives techniques have been focused on the effective removal of hazardous pollutants from the water streams. In this context, enzyme immobilization seems to be of specific interest to several researchers to develop novel, effective, greener, and hybrid strategies for the removal of toxic contaminants. Immobilization is a biotechnological tool, anchoring the enzymes on support material to enhance the stability and retain the structural conformation of enzymes for catalysis. Recyclability and reusability are the main merits of immobilized enzymes over free enzymes. Studies showed that immobilized enzyme laccase can be used up to 7 cycles with 66% efficiency, peroxidase can be recycled to 2 cycles with 50% efficiency, and also cellulase to 3 cycles with 91% efficiency. In this review, basic concepts of immobilization, different immobilization techniques, and carriers used for immobilization are summarized. In addition to that, the potential of immobilized enzymes as the bioremediation agents for the effective degradation of pollutants from the contaminated zone and the impact of different operating parameters are summarized in-depth. Further, this review provides future trends and challenges that have to be solved shortly for enhancing the potential of immobilized systems for large-scale industrial wastewater treatment.