A review on controlled porosity osmotic pump tablets and its evaluation

Sustained-Release Vildagliptin 100 mg in Type 2 Diabetes Mellitus: A Review

Dipeptidyl peptidase-4 inhibitors (DPP4Is) were introduced into the management of type 2 diabetes mellitus (T2DM) as they are insulinotropic and have no inherent risk of hypoglycemia and no effect on body weight. Currently, 11 drugs in this class are available for the management of diabetes. Although they have a similar mechanism of action, they differ from one other in their binding mechanisms, which influences their therapeutic and pharmacological profiles. Vildagliptin's overall safety and tolerability profile was comparable to placebo throughout clinical studies, and real-world data in a large group of T2DM patients corroborated this finding. Therefore, DPP4Is like vildagliptin is a secure alternative for treating patients with T2DM. Vildagliptin treatment given as a once-daily (QD) 100 mg sustained release (SR) formulation fits the criteria of adherence and compliance. This SR formulation, given once daily has the potential to provide glycemic control like the vildagliptin 50 mg twice-daily (BD) formulation. This comprehensive review discusses the journey of vildagliptin as 50 mg BD therapy as well as 100 mg SR QD therapy.

Osmotic Pump Drug Delivery Systems-A Comprehensive Review

In the last couple of years, novel drug delivery systems (NDDS) have attracted much attention in the food and pharmaceutical industries. NDDS is a broad term that encompasses many dosage forms, one of which is osmotic pumps. Osmotic pumps are considered to be the most reliable source of controlled drug delivery, both in humans and in animals. These pumps are osmotically controlled and release active agents through osmotic pressure. To a large extent, drug release from such a system is independent of gastric fluids. Based on such unique properties and advantages, osmotic pumps have made their mark on the pharmaceutical industry. This review summarizes the available osmotic devices for implantation and osmotic tablets for oral administration.

Customised 3D printed multi-drug systems: An effective and efficient approach to polypharmacy

INTRODUCTION

Combination therapies continue to improve therapeutic outcomes as currently achieved by polypharmacy. Since the introduction of the polypill, there has been a significant improvement in adherence and patient outcomes. However, the mass production of polypills presents a number of technical, formulation, and clinical challenges. The current one-size-fits-all approach ignores the unique clinical demands of patients, necessitating the adoption of a more versatile tool. That will be the novel, but not so novel, 3D printing.

AREAS COVERED

: The present review investigates this promising paradigm shift from one medication for all, to customised medicines, providing an overview of the current state of 3D-printed multi-active pharmaceutical forms, techniques applied and printing materials. Details on cost implications, as well as potential limitations and challenges are also elaborated.

EXPERT OPINION

: 3D printing of multi-active systems, is not only beneficial but also essential. With growing interest in this field, a shift in manufacturing, prescribing, and administration patterns is at this point, unavoidable. Addressing limitations and challenges, as well as data presentation on clinical trial results, will aid in the acceleration of this technology's implementation. However, it is clear that 3D printing is not the end of it, as evidenced by the emerging 4D printing technology.

Analytical Techniques for the Characterization of Bioactive Coatings for Orthopaedic Implants

The development of bioactive coatings for orthopedic implants has been of great interest in recent years in order to achieve both early- and long-term osseointegration. Numerous bioactive materials have been investigated for this purpose, along with loading coatings with therapeutic agents (active compounds) that are released into the surrounding media in a controlled manner after surgery. This review initially focuses on the importance and usefulness of characterization techniques for bioactive coatings, allowing the detailed evaluation of coating properties and further improvements. Various advanced analytical techniques that have been used to characterize the structure, interactions, and morphology of the designed bioactive coatings are comprehensively described by means of time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), 3D tomography, quartz crystal microbalance (QCM), coating adhesion, and contact angle (CA) measurements. Secondly, the design of controlled-release systems, the determination of drug release kinetics, and recent advances in drug release from bioactive coatings are addressed as the evaluation thereof is crucial for improving the synthesis parameters in designing optimal bioactive coatings.

Selective Laser Sintering 3D Printing of Orally Disintegrating Printlets Containing Ondansetron

The aim of this work was to explore the feasibility of using selective laser sintering (SLS) 3D printing (3DP) to fabricate orodispersable printlets (ODPs) containing ondansetron. Ondansetron was first incorporated into drug-cyclodextrin complexes and then combined with the filler mannitol. Two 3D printed formulations with different levels of mannitol were prepared and tested, and a commercial ondansetron orally disintegrating tablet (ODT) product (Vonau^® Flash) was also investigated for comparison. Both 3D printed formulations disintegrated at ~15 s and released more than 90% of the drug within 5 min independent of the mannitol content; these results were comparable to those obtained with the commercial product. This work demonstrates the potential of SLS 3DP to fabricate orodispersible printlets with characteristics similar to a commercial ODT, but with the added benefit of using a manufacturing technology able to prepare medicines individualized to the patient.

Release Mechanism Between Ion Osmotic Pressure and Drug Release in Ionic-Driven Osmotic Pump Tablets (I)

The objective of this study was to develop an authentic ionic-driven osmotic pump system and investigate the release mechanism, simultaneously exploring the in vitro and in vivo correlation of the ionic-driven osmotic pump tablet. A comparison of the ionic-driven and conventional theophylline osmotic pump, the influence of pH and the amount of sodium chloride on drug release, the relationship between the ionic osmotic pressure and the drug release, and the pharmacokinetics experiment in beagle dogs were investigated. Consequently, the similarity factor (f ₂ ) between the novel and conventional theophylline osmotic pump tablet was 60.18, which indicated a similar drug-release behavior. Also, the release profile fitted a zero-order kinetic model. The relative bioavailability of the ionic-driven osmotic pump to the conventional osmotic pump calculated from the AUC _(0-∞) was 93.6% and the coefficient (R = 0.9945) confirmed that the ionic-driven osmotic pump exhibited excellent IVIVC. The driving power of the ionic-driven osmotic pump was produced only by ions, which was strongly dependent on the ion strength, and a novel formula for the ionic-driven osmotic pump was derived which indicated that the drug-release rate was proportional to the ionic osmotic pressure and the sodium chloride concentration. Significantly, the formula can predict the drug-release rate and release characteristics of theophylline ionic-driven osmotic pumps, guiding future modification of the ionic osmotic pump.

Regenerated cellulose capsules for controlled drug delivery: Part IV. In-vitro evaluation of novel self-pore forming regenerated cellulose capsules

In the present work, the release mechanisms of active pharmaceutical ingredients (APIs) enclosed in self-pore forming regenerated cellulose (RC) two-piece hard shell capsules are described. The RC capsules were fabricated using a modified dip-coating approach, which yielded an assembled dosage form that was equivalent in size and shape to a conventional gelatin two-piece hard shell capsule. Drug release characteristics from RC capsules were evaluated using potassium chloride, diphenhydramine hydrochloride, tramadol hydrochloride, niacinamide, acetaminophen and ketoprofen as model APIs. The RC capsules act as a barrier coated reservoir device that releases the enclosed API at a zero order release rate. When comparing all the API's release behavior from RC capsules, a power-law relationship was observed between their zero-order release rates and their respective aqueous solubilities. Osmotic as well as diffusive mechanisms are involved in the release of the enclosed API. The osmotic mechanism's contribution to zero order release rate increases as the aqueous solubility of the tested APIs inside the capsule increases. The osmotic mediated flux and the apparent diffusivity of the APIs through the capsule wall is a competitive process and the osmotic mediated flux of the enclosed API begins to override its diffusivity through the capsule wall as the API solubility increases. This behavior is attributed to the wide range of pore sizes observed in RC membranes, from our prior analysis. The fluid permeability analysis shows that the RC capsules presented in this work may be better suited for osmotic drug delivery applications than conventional encapsulated systems described in the literature.

A novel asymmetric membrane osmotic pump capsule with in situ formed delivery orifices for controlled release of gliclazide solid dispersion system

In this study, a novel asymmetric membrane osmotic pump capsule of gliclazide (GLC) solid dispersion was developed to achieve a controlled drug release. The capsule shells were obtained by wet phase inversion process using cellulose acetate as semi-permeable membrane, glycerol and kolliphor P188 as pore formers, then filled with the mixture of GLC solid dispersion and pH modifiers. Differentiate from the conventional formulations, sodium carbonate was chosen as the osmotic agent and effervescent agent simultaneously to control the drug release, instead of the polymer materials. The ternary solid dispersion of GLC, with polyethylene glycol 6000 and kolliphor P188 as carriers, was prepared by solvent-evaporation method, realizing a 2.09-fold increment in solubility and dissolution rate in comparison with unprocessed GLC. Influence of the composition of the coating solution and pH modifiers on the drug release from the asymmetric membrane capsule (AMC) was investigated. The ultimate cumulative release of the optimal formulation reached 91.32% in an approximately zero-order manner. The osmotic pressure test and dye test were conducted to validate the drug release mechanism from the AMC. The in vivo pharmacokinetic study of the AMC indicated a 102.66±10.95% relative bioavailability compared with the commercial tablet, suggesting the bioequivalence between the two formulations. Consequently, the novel controlled delivery system with combination of solid dispersion and AMC system is capable of providing a satisfactory alternative to release the water-insoluble drugs in a controlled manner.