Polylysine-decorated macroporous microcarriers laden with adipose-derived stem cells promote nerve regeneration in vivo

Harnessing three-dimensional porous chitosan microsphere embedded with adipose-derived stem cells to promote nerve regeneration

BACKGROUND

Nerve guide conduits are a promising strategy for reconstructing peripheral nerve defects. Improving the survival rate of seed cells in nerve conduits is still a challenge and microcarriers are an excellent three-dimensional (3D) culture scaffold. Here, we investigate the effect of the 3D culture of microcarriers on the biological characteristics of adipose mesenchymal stem cells (ADSCs) and to evaluate the efficacy of chitosan nerve conduits filled with microcarriers loaded with ADSCs in repairing nerve defects.

METHODS

In vitro, we prepared porous chitosan microspheres by a modified emulsion cross-linking method for loading ADSCs and evaluated the growth status and function of ADSCs. In vivo, ADSCs-loaded microcarriers were injected into chitosan nerve conduits to repair a 12 mm sciatic nerve defect in rats.

RESULTS

Compared to the conventional two-dimensional (2D) culture, the prepared microcarriers were more conducive to the proliferation, migration, and secretion of trophic factors of ADSCs. In addition, gait analysis, neuro-electrophysiology, and histological evaluation of nerves and muscles showed that the ADSC microcarrier-loaded nerve conduits were more effective in improving nerve regeneration.

CONCLUSIONS

The ADSCs-loaded chitosan porous microcarrier prepared in this study has a high cell engraftment rate and good potential for peripheral nerve repair.

Biomimetic fabrication of sr-silk fibroin co-assembly hydroxyapatite based microspheres with angiogenic and osteogenic properties for bone tissue engineering

Bone defects caused by trauma, tumor resection, or developmental abnormalities are important issues in clinical practice. The vigorous development of tissue engineering technology provides new ideas and directions for regenerating bone defects. Hydroxyapatite (HAp), a bioactive ceramic, is extensively used in bone tissue engineering because of its excellent osteoinductive performance. However, its application is challenged by its single function and conventional environment-unfriendly synthesis methods. In this study, we successfully "green" synthesized sr-silk fibroin co-assembly hydroxyapatite nanoparticles (Sr-SF-HA) using silk fibroin (SF) as a biomineralized template, thus enabling it to have angiogenic activity and achieving the combination of organic and inorganic substances. Then, the rough composite microspheres loaded with Sr-SF-HA (CS/Sr-SF-HA) through electrostatic spraying technology and freeze-drying method were prepared. The CCK-8 test and live/dead cell staining showed excellent biocompatibility of CS/Sr-SF-HA. Alkaline phosphatase (ALP) staining, alizarin red staining (ARS), immunofluorescence, western blotting, and qRT-PCR test showed that CS/Sr-SF-HA activated the expression of related genes and proteins, thus inducing the osteogenic differentiation of rBMSCs. Moreover, tube formation experiments, scratch experiments, immunofluorescence, and qRT-PCR detection indicated that CS/Sr-SF-HA have good angiogenic activity. Furthermore, in vivo studies showed that the CS/Sr-SF-HA possesses excellent biocompatibility, vascular activity, as well as ectopic osteogenic ability in the subcutaneous pocket of rats. This study indicates that the construction of CS/Sr-SF-HA with angiogenic and osteogenic properties has great potential for bone tissue engineering.

Combining PLGA microspheres loaded with Liver X receptor agonist GW3965 with a chitosan nerve conduit can promote the healing and regeneration of the wounded sciatic nerve

Globally, peripheral nerve injury (PNI) is a common clinical issue. Successfully repairing severe PNIs has posed a major challenge for clinicians. GW3965 is a highly selective LXR agonist, and previous studies have demonstrated its positive protective effects in both central and peripheral nerve diseases. In this work, we examined the potential reparative effects of GW3965-loaded polylactic acid co-glycolic acid microspheres in conjunction with a chitosan nerve conduit for peripheral nerve damage. The experiment revealed that GW3965 promoted Schwann cell proliferation and neurotrophic factor release in vitro. In vivo experiments conducted on rats showed that GW3965 facilitated the restoration of motor function, promoted axon and myelin regeneration in the sciatic nerve, and enhanced the microenvironment of nerve regeneration. These results offer a novel therapeutic approach for the healing of nerve damage. Overall, this work provides valuable insights and presents a promising therapeutic strategy for addressing PNI.

Decellularized extracellular matrix scaffold seeded with adipose-derived stem cells promotes neurorestoration and functional recovery after spinal cord injury through Wnt/β-catenin signaling pathway regulation

Spinal cord injury (SCI) causes tissue destruction and neuronal apoptosis, which impede neural function recovery. Therefore, promoting neuronal regeneration and neural pathway reconstruction is crucial. In this study, a novel and facile decellularized extracellular matrix (dECM) scaffold seeded with adipose-derived stem cells (ADSCs) (dECM scaffolds/ADSCs) was reported. The dECM scaffold maintained the original three-dimensional network structure of spinal cord tissue and contained various small pores.In vitrostudies demonstrated that dECM scaffolds exhibited excellent biocompatibility, facilitated efficient adhesion and proliferation of ADSCs, and promoted the secretion of neurotrophin-3 and neuronal differentiation in the microenvironment after SCI.In vivostudies further showed that dECM scaffolds/ADSCs could alleviate inflammatory and apoptotic reactions, providing a favorable microenvironment for promoting endogenous nerve regeneration rather than glial scars formation, ultimately achieving recovery of hind limb function in rats. Notably, ICG-001 effectively reversed the therapeutic effect of dECM scaffolds/ADSCs, proving that dECM scaffolds/ADSCs promoted functional recovery after SCI by regulating the Wnt/β-catenin signaling pathway. Overall, dECM scaffolds/ADSCs can simulate the physiological characteristics of the spinal cord and exert neurorestorative potential, providing a new therapeutic strategy for SCI.

Effective regeneration of rat sciatic nerve using nanofibrous scaffolds containing rat ADSCs with controlled release of rhNGF and melatonin molecules for the treatment of peripheral injury model

Different therapeutic strategies have been designed and developed for the repair and regeneration of peripheral nerve injury (PNI) tissue as a result of advancements in tissue engineering and regenerative medicine. Due to its versatility, controlled delivery and administration of multifunctional therapeutic agents can be regarded of as an effective strategy in treating nerve injury. In this study, melatonin (Mel) molecules and recombinant human nerve growth factor (rhNGF) were loaded on the surface and in the core of polycaprolactone/chitosan (PCL/CS) blended nanofibrous scaffold. To simulate the in vivo microenvironment, a dual-delivery three-dimensional (3-D) nanofibrous matrix was developed and the in vitro neural development of stem cell differentiation process was systematically examined. The microscopic technique with acridine orange and ethidium bromide (AO/EB) fluorescence staining method was used to establish the adipose-derived stem cells (ADSCs) differentiation and cell-cell communications, which demonstrated that the effective differentiation of the ADSCs with nanofibrous matrix. As investigated observations, ADSCs differentiation was further evident through cell migration assay and gene expression analysis. According to the biocompatibility analysis, the nanofibrous matrix did not trigger any adverse immunological reactions. Based on these characteristics, a 5-week in vivo investigation examined the potential of the developed nanofibrous matrix in the regeneration of sciatic nerve of rats. Additionally, compared to the negative control group, the electrophysiological and walking track analyses demonstrated improved sciatic nerve regeneration. This study demonstrates the nanofibrous matrix's ability to regenerate peripheral nerves.

Stem-cell based soft tissue substitutes: Engineering of crosslinked polylysine-hyaluronic acid microspheres ladened with gingival mesenchymal stem cells for collagen tissue regeneration and angiogenesis

BACKGROUND

The aim of this study was to construct crosslinked polylysine-hyaluronic acid microspheres (pl-HAM) ladened with gingival mesenchymal stem cells (GMSCs) and explore its biologic behavior in soft tissue regeneration.

METHODS

The effects of the crosslinked pl-HAM on the biocompatibility and the recruitment of L-929 cells and GMSCs were detected in vitro. Moreover, the regeneration of subcutaneous collagen tissue, angiogenesis and the endogenous stem cells recruitment were investigated in vivo. We also detected the cell developing capability of pl-HAMs.

RESULTS

The crosslinked pl-HAMs appeared to be completely spherical-shaped particles and had good biocompatibility. L-929 cells and GMSCs grew around the pl-HAMs and increased gradually. Cell migration experiments showed that pl-HAMs combined with GMSCs could promote the migration of vascular endothelial cells significantly. Meanwhile, the green fluorescent protein-GMSCs in the pl-HAM group still remain in the soft tissue regeneration area 2 weeks after surgery. The results of in vivo studies showed that denser collagen deposition and more angiogenesis-related indicator CD31 expression in the pl-HAMs+ GMSCs + GeL group compared with the pl-HAMs + GeL group. Immunofluorescence showed that CD44, CD90, CD73 co-staining positive cells surrounded the microspheres in both pl-HAMs + GeL group and pl-HAM + GMSCs + GeL group.

CONCLUSIONS

The crosslinked pl-HAM ladened with GMSCs system could provide a suitable microenvironment for collagen tissue regeneration, angiogenesis and endogenous stem cells recruitment, which may be an alternative to autogenous soft tissue grafts for minimally invasive treatments for periodontal soft tissue defects in the future.

Novel Bioinspired Nerve Scaffold with High Synchrony between Biodegradation and Nerve Regeneration for Repair of Peripheral Nerve Injury

The morphological structure reconstruction and functional recovery of long-distance peripheral nerve injury (PNI) are global medical challenges. Biodegradable nerve scaffolds that provide mechanical support for the growth and extension of neurites are a desired way to repair long-distance PNI. However, the synchrony of scaffold degradation and nerve regeneration is still challenging. Here, a novel bioinspired multichannel nerve guide conduit (MNGC) with topographical cues based on silk fibroin and ε-polylysine modification was constructed. This conduit (SF(A) + PLL MNGC) exhibited sufficient mechanical strength, excellent degradability, and favorable promotion of cell growth. Peripheral nerve repairing was evaluated by an in vivo 10 mm rat sciatic model. In vivo evidence demonstrated that SF(A) + PLL MNGC was completely biodegraded in the body within 4 weeks after providing sufficient physical support and guide for neurite extension, and a 10 mm sciatic nerve defect was effectively repaired without scar formation, indicating a high synchronous effect of scaffold biodegradation and nerve regeneration. More importantly, the regenerated nerve of the SF(A) + PLL MNGC group showed comparable morphological reconstruction and functional recovery to that of autologous nerve transplantation. This work proved that the designed SF(A) + PLL MNGC has potential for application in long-distance PNI repair in the clinic.

Double-network cellulose-based hybrid hydrogels with favourable biocompatibility and antibacterial activity for wound healing

Bacterial infections are among the leading causes of delayed wound healing. At present, a series of antibacterial materials, such as antibiotics, antimicrobial peptides (AMPs), metals and metal oxides (MMOs), have been used to fabricate antibacterial wound dressings. However, their translational potential is limited owing to their poor biocompatibility. ε-Polylysine (ε-PL) is a natural macromolecule with excellent biocompatibility and broad-spectrum antibacterial activity. Herein, ε-PL was incorporated into a cellulose/γ-polyglutamic acid (γ-PGA) composite hydrogel to form a novel double-network hydrogel termed as CGLH. The elastic modulus of CGLH increased from 0.097 ± 0.015 MPa to 0.441 ± 0.096 MPa, and the equilibrium swelling ratio increased from 382.7 ± 24.3 % to 611.2 ± 8.6 %. Several preclinical models were used to investigate the translational potential of this hydrogel. CGLH exhibited good biocompatibility and antibacterial activity, which promoted the healing of infected and critical-size wounds within 12 days. CGLH had positive effects on collagen synthesis, vascularization and cell proliferation. As a result, this study not only provided an effective alternative for wound healing but also proposed a double-network strategy for creating biocompatible and antibacterial biomaterials.

Etamsylate loaded oxidized Konjac glucomannan-ε-polylysine injectable hydrogels for rapid hemostasis and wound healing

Uncontrollable bleeding is a crucial factor that can lead to fatality. Therefore, the development of hemostatic dressings that enable rapid hemostasis is of utmost importance. Hydrogels with injectability, self-healing ability, and adhesiveness hold significant potential as effective hemostatic dressings. Herein, a composite hydrogel was fabricated by the oxidized Konjac glucomannan and ε-polylysine. After the encapsulation of a hemostatic drug, etamsylate, an oxidized Konjac glucomannan/ε-polylysine/etamsylate (OKGM/PL/E) composite hydrogel that possesses favorable properties including injectability, self-healing ability, tissue adhesiveness, hemocompatibility and cytocompatibility was fabricated. The OKGM/PL/E hydrogel demonstrated the ability to effectively adhere red blood cells and seal wounds, enabling rapid control of hemorrhaging. In vivo wound healing experiments confirmed the hemostatic and wound healing efficacy of the OKGM/PL/E hydrogel, highlighting its potential as a valuable hemostatic dressing.

Electroactive scaffolds of biodegradable polyurethane/polydopamine-functionalized graphene oxide regulating the inflammatory response and revitalizing the axonal growth cone for peripheral nerve regeneration

Long-gap peripheral nerve injury remains a major challenge in regenerative medicine and results in permanent sensory and motor dysfunction. Nerve guidance scaffolds (NGSs) are known as a promising alternative to autologous nerve grafting. The latter, the current "gold standard" in clinical practice, is frequently constrained by the limited availability of sources and the inevitable damage to the donor area. Given the electrophysiological properties of nerves, electroactive biomaterials are being intensively investigated in nerve tissue engineering. In this study, we engineered a conductive NGS compounded of biodegradable waterborne polyurethane (WPU) and polydopamine-reduced graphene oxide (pGO) for repairing impaired peripheral nerves. The incorporation of pGO at the optimal concentration (3 wt%) promoted in vitro spreading of Schwann cells (SCs) with high expression of the proliferation marker S100 protein. In an in vivo study of sciatic nerve transection injury, WPU/pGO NGSs were found to regulate the immune microenvironment by activating macrophage M2 polarization and upregulate growth-associated protein 43 (GAP43) to facilitate axonal elongation. Histological and motor function analysis demonstrated that WPU/pGO NGSs had a neuroprosthetic effect close to that of an autograft, which significantly promoted the regeneration of myelinated axons, reduced gastrocnemius atrophy, and enhanced hindlimb motor function. These findings together suggested that electroactive WPU/pGO NGSs may represent a safe and effective strategy to manage large nerve defects.

Manipulation of porous poly(l-lactide-co-ε-caprolactone) microcarriers via microfluidics for C2C12 expansion

The growth and repair of skeletal muscle are due in part to activation of muscle precursor cells, commonly known as satellite cells or myoblasts. In order to acquire enough cells for neoskeletal muscle regeneration, it is urgent to develop microcarriers for skeletal myoblasts proliferation with a considerable efficiency. The current study was thus proposed to develop a microfluidic technology to manufacture porous poly(l-lactide-co-ε-caprolactone) (PLCL) microcarriers of high uniformity, and porosity was manipulated via camphene to suit the proliferation of C2C12 cells. A co-flow capillary microfluidic device was first designed to obtain PLCL microcarriers with different porosity. The attachment and proliferation of C2C12 cells on these microcarriers were evaluated and the differentiation potential of expanded cells were verified. The obtained porous microcarriers were all uniform in size with a high mono-dispersity (CV < 5 %). The content of camphene rendered effects on the size, porosity, and pore size of microcarriers, and porous structure addition produced a softening of their mechanical properties. The one of 10 % camphene (PM-10) exhibited the superior expansion for C2C12 cells with the number of cells after 5 days of culture reached 9.53 times of the adherent cells on the first day. The expanded cells from PM-10 still retained excellent myogenic differentiation performance as the expressions of MYOD, Desmin and MYH2 were intensively enhanced. Hence, the current developed porous PLCL microcarriers could offer as a promising type of substrates not only for in vitro muscular precursor cells expansion without compromising any multipotency but also have the potential as injectable constructs to mediate muscle regeneration.

3D Printed Conductive Multiscale Nerve Guidance Conduit with Hierarchical Fibers for Peripheral Nerve Regeneration

Nerve guidance conduits (NGCs) have become a promising alternative for peripheral nerve regeneration; however, the outcome of nerve regeneration and functional recovery is greatly affected by the physical, chemical, and electrical properties of NGCs. In this study, a conductive multiscale filled NGC (MF-NGC) consisting of electrospun poly(lactide-co-caprolactone) (PCL)/collagen nanofibers as the sheath, reduced graphene oxide /PCL microfibers as the backbone, and PCL microfibers as the internal structure for peripheral nerve regeneration is developed. The printed MF-NGCs presented good permeability, mechanical stability, and electrical conductivity, which further promoted the elongation and growth of Schwann cells and neurite outgrowth of PC12 neuronal cells. Animal studies using a rat sciatic nerve injury model reveal that the MF-NGCs promote neovascularization and M2 transition through the rapid recruitment of vascular cells and macrophages. Histological and functional assessments of the regenerated nerves confirm that the conductive MF-NGCs significantly enhance peripheral nerve regeneration, as indicated by improved axon myelination, muscle weight increase, and sciatic nerve function index. This study demonstrates the feasibility of using 3D-printed conductive MF-NGCs with hierarchically oriented fibers as functional conduits that can significantly enhance peripheral nerve regeneration.

Emerging Trends in Biodegradable Microcarriers for Therapeutic Applications

Microcarriers (MCs) are adaptable therapeutic instruments that may be adjusted to specific therapeutic uses, making them an appealing alternative for regenerative medicine and drug delivery. MCs can be employed to expand therapeutic cells. MCs can be used as scaffolds for tissue engineering, as well as providing a 3D milieu that replicates the original extracellular matrix, facilitating cell proliferation and differentiation. Drugs, peptides, and other therapeutic compounds can be carried by MCs. The surface of the MCs can be altered, to improve medication loading and release, and to target specific tissues or cells. Allogeneic cell therapies in clinical trials require enormous volumes of stem cells, to assure adequate coverage for several recruitment locations, eliminate batch to batch variability, and reduce production costs. Commercially available microcarriers necessitate additional harvesting steps to extract cells and dissociation reagents, which reduces cell yield and quality. To circumvent such production challenges, biodegradable microcarriers have been developed. In this review, we have compiled key information relating to biodegradable MC platforms, for generating clinical-grade cells, that permit cell delivery at the target site without compromising quality or cell yields. Biodegradable MCs could also be employed as injectable scaffolds for defect filling, supplying biochemical signals for tissue repair and regeneration. Bioinks, coupled with biodegradable microcarriers with controlled rheological properties, might improve bioactive profiles, while also providing mechanical stability to 3D bioprinted tissue structures. Biodegradable materials used for microcarriers have the ability to solve in vitro disease modeling, and are advantageous to the biopharmaceutical drug industries, because they widen the spectrum of controllable biodegradation and may be employed in a variety of applications.

Microcarriers in application for cartilage tissue engineering: Recent progress and challenges

Successful regeneration of cartilage tissue at a clinical scale has been a tremendous challenge in the past decades. Microcarriers (MCs), usually used for cell and drug delivery, have been studied broadly across a wide range of medical fields, especially the cartilage tissue engineering (TE). Notably, microcarrier systems provide an attractive method for regulating cell phenotype and microtissue maturations, they also serve as powerful injectable carriers and are combined with new technologies for cartilage regeneration. In this review, we introduced the typical methods to fabricate various types of microcarriers and discussed the appropriate materials for microcarriers. Furthermore, we highlighted recent progress of applications and general design principle for microcarriers. Finally, we summarized the current challenges and promising prospects of microcarrier-based systems for medical applications. Overall, this review provides comprehensive and systematic guidelines for the rational design and applications of microcarriers in cartilage TE.

•

This review summarized fabrication techniques and cartilage repaired application of microcarriers.

•

The appropriate materials and design principle for microcarriers in cartilage tissue engineering are discussed.

•

Promising future perspectives and challenges in microcarriers fields are outlined.

Design of 3D polycaprolactone/ε-polylysine-modified chitosan fibrous scaffolds with incorporation of bioactive factors for accelerating wound healing

Electrospun nanofibrous scaffolds show great application potentials for wound healing owing to their effective simulation of extracellular matrix (ECM). Three-dimensional (3D) nanofibrous dressings exhibit relatively high specific surface areas, better mimicry of native ECM, adjustable hydrophilicity and breathability, good histocompatibility, enhanced wound healing, and reduced inflammation. In the present work, we designed the 3D polycaprolactone/ε-polylysine modified chitosan (PCL/PCS) nanofibrous scaffolds by an electrospinning and gas foaming process. Then, gelatin and heparin (Gel/Hep) were assembled onto the surface of PCL/PCS nanofibers by electrostatic adsorption, and vascular endothelial growth factors (VEGFs) were also synchronously incorporated into Gel/Hep layer to form a multifunctional 3D nanofibrous scaffold (PCL/PCS@Gel/Hep+VEGF) for accelerating wound healing. The as-fabricated 3D PCL/PCS@GEL/Hep+VEGF nanofibrous scaffold showed excellent antibacterial ability, hemocompatibility and biocompatibility in vitro and wound healing ability in vivo. Immunological analysis showed that the as-fabricated nanofibrous scaffold inhibited inflammation at the wound sites while promoting angiogenesis during the wound healing process. STATEMENT OF SIGNIFICANCE: The electrospun 3D fibrous scaffolds using polycaprolactone/ε-polylysine modified chitosan (PCL/PCS) have been fabricated as backbone for mimicking the extracellular matrix (ECM). Gelatin and heparin (Gel/Hep) were wrapped onto the surface of PCL/PCS fibers by electrostatic adsorption and vascular endothelial growth factors (VEGFs) were also synchronously incorporated into surface Gel/Hep layer to form multifunctional 3D fibrous scaffolds. The as-fabricated multifunctional 3D fibrous scaffolds with good antibacterial ability and biocompatibility have been used as dressings for accelerating wound healing by inhibiting inflammation at the wound sites while promoting angiogenesis during the wound healing process.

SDF-1 Functionalized Hydrogel Microcarriers for Skin Flap Repair

Critically sized skin flaps used to treat skin defects often suffer from necrosis due to insufficient blood supply. Hence there is an urgent need to improve the survival rate of skin flaps by promoting local angiogenesis. The delivery of growth factor loaded microcarriers have shown promise in enhancing defect repair, however, their rapid clearance from the defect site limits their regenerative potential. Thus, it is critical to develop microcarriers which can promote the sustained release of bioactive factors to effectively stimulate tissue repair. This study aimed to develop a stromal cell-derived factor 1 (SDF-1) loaded microcarrier coated with Matrigel (MC@SDF-1@Mat) to promote skin flap repair. SEM imaging showed that the surface of the microcarrier was coated by a porous Matrigel film. The drug release experiment showed that the Matrigel-coated microcarriers enhanced the sustained release of the model drug methylene blue when compared to uncoated group. MC@SDF-1@Mat significantly promoted the proliferation, migration, and angiogenesis of HUVECs via CCK-8, wound healing assay, and tube formation assay, respectively. Moreover, the murine random skin flap model was further established and treated. It was found that the flap necrosis area in the MC@SDF-1@Mat treated group was significantly reduced. H&E and Masson staining showed the histological structure and collagen organization exhibited a normal phenotype in the MC@SDF-1@Mat treated group. Additionally, CD31 immunohistochemical analysis showed that the MC@SDF-1@Mat treated group exhibited the greatest degree of neovascularization. In conclusion, our SDF-1 functionalized gelatin-based hydrogel microcarrier has potential clinical applications in promoting skin flap repair and drug delivery.

Bioorthogonal DOPA-NGF activated tissue engineering microunits for recovery from traumatic brain injury by microenvironment regulation

Stem cell treatment is vital for recovery from traumatic brain injury (TBI). However, severe TBI usually leads to excessive inflammation and neuroinhibitory factors in the injured brain, resulting in poor neural cell survival and uncontrolled formation of glial scars. In this study, a bioorthogonal microenvironment was constructed on biodegradable poly(lactide-co-glycolide) (PLGA) microcarriers through immobilization of mussel-inspired bioorthogonal 3,4-dihydroxyphenylalanine-containing recombinant nerve growth factor (DOPA-NGF) and human umbilical cord mesenchymal stem cells (hUMSCs) for minimally invasive therapy of TBI. Cell culture and RNA-seq analysis revealed enhanced extracellular matrix (ECM) secretion and viability of hUMSCs on PLGA microcarriers compared to 2D culture. Immobilized DOPA-NGF further promoted adhesion, proliferation, and gene expression in RSC96 neurotrophic cells and hUMSCs. Specifically, the neurotrophin receptor of NT-3 (NTRK3) in hUMSCs was activated by DOPA-NGF, leading to MYC transcription and paracrine enhancement to build an adjustable biomimetic microenvironment. After transplantation of microunits in animal models, the motor and learning-memory ability of TBI mice were improved through rollbacks of overactivated inflammatory reaction regulation, neuronal death, and glial scar formation after injury. This was attributed to the paracrine enhancement of hUMSCs activated by the DOPA-NGF. Our study provides a neural regenerative microenvironment-based therapeutic strategy to advance the effects of transplanted hUMSCs in cell-based regenerative medicine for TBI therapy. STATEMENT OF SIGNIFICANCE: Extensive studies have demonstrated the importance of the microenvironment for posttraumatic brain injury recovery. However, an efficient method that can mimic the neural regenerative microenvironment to strengthen stem cell therapy and brain injury recovery is still absent. In this study, the minimally invasive transplantation of DOPA-NGF immobilized biodegradable microcarriers with mesenchymal stem cells was found to be an effective method for regeneration of injured brain. Moreover, transcriptome analysis revealed that neurotrophin receptor of NT-3 (NTRK3) was activated by DOPA-NGF for MYC transcription and paracrine enhancement to build a kind of adjustable biomimetic microenvironment for brain injury therapy. This study provides a neural regenerative microenvironment-based therapeutic strategy to advance the transplanted hUMSCs in cell-based regenerative medicine for neural recovery.

Neural tissue engineering: From bioactive scaffolds and in situ monitoring to regeneration

Peripheral nerve injury is a large-scale problem that annually affects more than several millions of people all over the world. It remains a great challenge to effectively repair nerve defects. Tissue engineered nerve guidance conduits (NGCs) provide a promising platform for peripheral nerve repair through the integration of bioactive scaffolds, biological effectors, and cellular components. Herein, we firstly describe the pathogenesis of peripheral nerve injuries at different orders of severity to clarify their microenvironments and discuss the clinical treatment methods and challenges. Then, we discuss the recent progress on the design and construction of NGCs in combination with biological effectors and cellular components for nerve repair. Afterward, we give perspectives on imaging the nerve and/or the conduit to allow for the in situ monitoring of the nerve regeneration process. We also cover the applications of different postoperative intervention treatments, such as electric field, magnetic field, light, and ultrasound, to the well-designed conduit and/or the nerve for improving the repair efficacy. Finally, we explore the prospects of multifunctional platforms to promote the repair of peripheral nerve injury.

Ti3C2Tx MXene-Coated Electrospun PCL Conduits for Enhancing Neurite Regeneration and Angiogenesis

An electrical signal is the key basis of normal physiological function of the nerve, and the stimulation of the electric signal also plays a very special role in the repair process of nerve injury. Electric stimulation is shown to be effective in promoting axonal regeneration and myelination, thereby promoting nerve injury repair. At present, it is considered that electric conduction recovery is a key aspect of regeneration and repair of long nerve defects. Conductive neural scaffolds have attracted more and more attention due to their similar electrical properties and good biocompatibility with normal nerves. Herein, PCL and MXene-PCL nerve guidance conduits (NGCs) were prepared; their effect on nerve regeneration was evaluated in vitro and in vivo. The results show that the NGCs have good biocompatibility in vitro. Furthermore, a sciatic nerve defect model (15 mm) of SD rats was made, and then the fabricated NGCs were implanted. MXene-PCL NGCs show similar results with the autograft in the sciatic function index, electrophysiological examination, angiogenesis, and morphological nerve regeneration. It is possible that the conductive MXene-PCL NGC could transmit physiological neural electric signals, induce angiogenesis, and stimulate nerve regeneration. This paper presents a novel design of MXene-PCL NGC that could transmit self-originated electric stimulation. In the future, it can be combined with other features to promote nerve regeneration.

Droplet microfluidics-based biomedical microcarriers

Droplet microfluidic technology provides a new platform for controllable generation of microdroplets and droplet-derived materials. In particular, because of the ability in high-throughput production and accurate control of the size, structure, and function of these materials, droplet microfluidics presents unique advantages in the preparation of functional microcarriers, i.e., microsized liquid containers or solid particles that serve as substrates of biomolecules or cells. These microcarriers could be extensively applied in the areas of cell culture, tissue engineering, and drug delivery. In this review, we focus on the fabrication of microcarriers from droplet microfluidics, and discuss their applications in the biomedical field. We start with the basic principle of droplet microfluidics, including droplet generation regimes and its control methods. We then introduce the fabrication of biomedical microcarriers based on single, double, and multiple emulsion droplets, and emphasize the various applications of microcarriers in biomedical field, especially in 3D cell culture, drug development and biomedical detection. Finally, we conclude this review by discussing the limitations and challenges of droplet microfluidics in preparing microcarriers. STATEMENT OF SIGNIFICANCE: Because of its precise control and high throughput, droplet microfluidics has been employed to generate functional microcarriers, which have been widely used in the areas of drug development, tissue engineering, and regenerative medicine. This review is significant because it emphasizes recent progress in research on droplet microfluidics in the preparation and application of biomedical microcarriers. In addition, this review suggests research directions for the future development of biomedical microcarriers based on droplet microfluidics by presenting existing shortcomings and challenges.

Micropatterned Poly(D,L-Lactide-Co-Caprolactone) Conduits With KHI-Peptide and NGF Promote Peripheral Nerve Repair After Severe Traction Injury

Severe traction injuries after stretch to peripheral nerves are common and challenging to repair. The nerve guidance conduits (NGCs) are promising in the regeneration and functional recovery after nerve injuries. To enhance the repair of severe nerve traction injuries, in this study KHIFSDDSSE (KHI) peptides were grafted on a porous and micropatterned poly(D,L-lactide-co-caprolactone) (PLCL) film (MPLCL), which was further loaded with a nerve growth factor (NGF). The adhesion number of Schwann cells (SCs), ratio of length/width (L/W), and percentage of elongated SCs were significantly higher in the MPLCL-peptide group and MPLCL-peptide-NGF group compared with those in the PLCL group in vitro. The electromyography (EMG) and morphological changes of the nerve after severe traction injury were improved significantly in the MPLCL-peptide group and MPLCL-peptide-NGF group compared with those in the PLCL group in vivo. Hence, the NGCs featured with both bioactive factors (KHI peptides and NGF) and physical topography (parallelly linear micropatterns) have synergistic effect on nerve reinnervation after severe traction injuries.