Molecularly imprinted poly[bis(2,2′-bithienyl)methane] film with built-in molecular recognition sites for a piezoelectric microgravimetry chemosensor for selective determination of dopamine

Multiplexed neurochemical sensing with sub-nM sensitivity across 2.25 mm2 area

Multichannel arrays capable of real-time sensing of neuromodulators in the brain are crucial for gaining insights into new aspects of neural communication. However, measuring neurochemicals, such as dopamine, at low concentrations over large areas has proven challenging. In this research, we demonstrate a novel approach that leverages the scalability and processing power offered by microelectrode array devices integrated with a functionalized, high-density microwire bundle, enabling electrochemical sensing at an unprecedented scale and spatial resolution. The sensors demonstrate outstanding selective molecular recognition by incorporating a selective polymeric membrane. By combining cutting-edge commercial multiplexing, digitization, and data acquisition hardware with a bio-compatible and highly sensitive neurochemical interface array, we establish a powerful platform for neurochemical analysis. This multichannel array has been successfully utilized in vitro and ex vivo systems. Notably, our results show a sensing area of 2.25 mm2 with an impressive detection limit of 820 pM for dopamine. This new approach paves the way for investigating complex neurochemical processes and holds promise for advancing our understanding of brain function and neurological disorders.

Smart bio-nano interface derived from zein protein as receptors for biotinyl moiety

Proteinaceous, tunable nanostructures of zein (prolamine of corn) were developed as biotinyl-specific receptors using a molecular imprinting technique. Sacrificial templates, such as latex beads (LB3) and anodized alumina membrane (AAM), have been used to control nanostructural patterns in biotin-imprinted zein (BMZ). Briefly, a methanolic solution of the zein-biotin complex was drop cast upon a self-organized LB3 and AAM templates on Au/quartz surfaces. Subsequent dissolution of these sacrificial templates affords highly oriented, predetermined, and uniformly grown hyperporous (300 nm) and nanowires (150 nm) motifs of zein (BMZ-LB3 and BMZ-AAM), as shown by scanning electron microscopy (SEM). Selective extraction of biotin molecular template cast-off site-selective biotin imprints within these zein nanostructures complementary to biotinyl moieties. Alternatively, biotin-imprinted zein nanoparticles (BMZ-Np) and thin film (BMZ-MeOH) were prepared by coacervation and drop casting methods, respectively. Density functional theoretical (DFT) studies reveal strong hydrogen-bonded interaction of biotin with serine and glutamine residues of zein. Quartz crystal microbalance (QCM) studies show remarkable sensitivity of the hyperporous-BMZ-LB3 and nanowires of BMZ-AAM towards biotin derivative (biotin methyl ester) by five (24.75 ± 1.34 Hz/mM) and four (18.19 ± 0.75 Hz/mM) times, respectively, higher than the BMZ-MeOH. Enhanced permeability features of the zein nanostructures, when templated with LB3, enable the QCM detection of biotin- or its derivatives down to 12.9 ng mL^-1 from dairy products (Kefir). The outcome of this study shall be a key aspect in interfacing biological materials with micro-/nano-sensors and electronic devices for detecting pertinent analytes using sustainably developed biopolymer-based nanostructures.

Electropolymerized molecular imprinting on glassy carbon electrode for voltammetric detection of dopamine in biological samples

A simple and reliable method for preparing a selective dopamine (DA) sensor based on a molecularly imprinted polymer of ethacridine was proposed. The molecularly imprinted polymer electrode was prepared through electrodepositing polyethacridine-dopamine film on the glassy carbon electrode and then removing DA from the film via chemical induced elution. The molecular imprinted sensor was tested by cyclic voltammetry as well as by differential pulse voltammetry (DPV) to verify the changes in oxidative currents of DA. In optimized DPV conditions the oxidation peak current was well-proportional to the concentration of DA in the range from 2.0×10(-8)M up to 1×10(-6)M. The limit of detection (3σ) of DA was found to be as low as 4.4nM, by the proposed sensor that could be considered a sensitive marker of DA depletion in Parkinson's disease. Good reproducibility with relative standard deviation of 1.4% and long term stability within two weeks were also observed. The modified sensor was validated for the analysis of DA in deproteinized human serum samples using differential pulse voltammetric technique.

Molecular imprinting: perspectives and applications

This critical review presents a survey of recent developments in technologies and strategies for the preparation of MIPs, followed by the application of MIPs in sample pretreatment, chromatographic separation and chemical sensing.

An electropolymerized molecularly imprinted polymer for selective carnosine sensing with impedimetric capacity

Functional monomers are designed for the development of a polymer with molecular cavities selective for the carnosine dipeptide recognition and quantification.

Selective electrochemical sensing of human serum albumin by semi-covalent molecular imprinting

We devised and prepared a conducting molecularly imprinted polymer (MIP) for human serum albumin (HSA) determination using semi-covalent imprinting. The bis(2,2'-bithien-5-yl)methane units constituted the MIP backbone. This MIP was deposited as a thin film on an Au electrode by oxidative potentiodynamic electropolymerization to fabricate an electrochemical chemosensor. The HSA template imprinting, and then its releasing from the MIP was confirmed by the differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), XPS, and PM-IRRAS measurements as well as by AFM imaging. Semi-covalent imprinting provided a very well defined locations of recognition sites in the MIP molecular cavities. These sites populated the imprinted cavities or the MIP surface only. The DPV and EIS response of the MIP film coated electrode to the HSA analyte was linear in the range of 0.8 to 20 and 4 to 80 µg/mL HSA, respectively, with the limit of detection of 16.6 and 800 ng/mL, respectively. The impressively high imprinting factor reached, exceeding 20, strongly confirmed that semi-covalent imprinting resulted in formation of a large number of very well defined molecular cavities with high affinity to the HSA molecules. The MIP selectivity against low-(molecular weight) interferences, common for physiological fluids, such as blood and urea, was very high. There was no response to the presence of these interferences at concentrations encountered in the samples analyzed. Moreover, the chemosensor selectivity to the myoglobin and cytochrome c interferences was excellent while that to lysozyme was slightly lower but still high. The chemosensor was useful for determination of abnormal HSA concentration in a control blood serum.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Electrochemical sensor based on magnetic graphene oxide@gold nanoparticles-molecular imprinted polymers for determination of dibutyl phthalate

A novel composite of magnetic graphene oxide @ gold nanoparticles-molecular imprinted polymers (MGO@AuNPs-MIPs) was synthesized and applied as a molecular recognition element to construct dibutyl phthalate (DBP) electrochemical sensor. The composite of MGO@AuNPs was first synthesized using coprecipitation and self-assembly technique. Then the template molecules (DBP) were absorbed at the MGO@AuNPs surface due to their excellent affinity, and subsequently, selective copolymerization of methacrylic acid and ethylene glycol dimethacrylate was further achieved at the MGO@AuNPs surface. Potential scanning was presented to extract DBP molecules from the imprinted polymers film rapidly and completely. As a consequence, an electrochemical sensor for highly sensitive and selective detection of DBP was successfully constructed as demonstration based on the synthesized MGO@AuNPs-MIPs composite. Under optimal experimental conditions, selective detection of DBP in a linear concentration range of 2.5 × 10(-9)-5.0 × 10(-6)mol/L was obtained. The new DBP electrochemical sensor also exhibited excellent repeatability, which expressed as relative standard deviation (RSD) was about 2.50% for 30 repeated analyses of 2.0 × 10(-6)mol/L DBP.

Fullerene derived molecularly imprinted polymer for chemosensing of adenosine-5'-triphosphate (ATP)

For molecular imprinting of oxidatively electroactive analytes by electropolymerization, we used herein reductively electroactive functional monomers. As a proof of concept, we applied C60 fullerene adducts as such for the first time. For that, we derivatized C60 to bear either an uracil or an amide, or a carboxy addend for recognition of the adenosine-5'-triphosphate (ATP) oxidizable analyte with the ATP-templated molecularly imprinted polymer (MIP-ATP). Accordingly, the ATP complex with all of the functional monomers formed in solution was potentiodynamically electropolymerized to deposit an MIP-ATP film either on an Au electrode of the quartz crystal resonator or on a Pt disk electrode for the piezoelectric microgravimetry (PM) or capacitive impedimetry (CI) determination of ATP, respectively, under the flow-injection analysis (FIA) conditions. The apparent imprinting factor for ATP was ∼4.0. After extraction of the ATP template, analytical performance of the resulting chemosensors, including detectability, sensitivity, and selectivity, was characterized. The limit of detection was 0.3 and 0.03mM ATP for the PM and CI chemosensor, respectively. The MIP-ATP film discriminated structural analogues of ATP quite well. The Langmuir, Freundlich, and Langmuir-Freundlich isotherms were fitted to the experimental data of the ATP sorption and sorption stability constants appeared to be nearly independent of the adopted sorption model.

A phage display screening derived Peptide with affinity for the adeninyl moiety

Phage display screening of a surface-immobilized adenine derivative led to the identification of a heptameric peptide with selectivity for adenine as demonstrated through quartz crystal microbalance (QCM) studies. The peptide demonstrated a concentration dependent affinity for an adeninyl moiety decorated surface (K_D of 968 ± 53.3 μM), which highlights the power of piezoelectric sensing in the study of weak interactions.

Hierarchical Thin Film Architectures for Enhanced Sensor Performance: Liquid Crystal-Mediated Electrochemical Synthesis of Nanostructured Imprinted Polymer Films for the Selective Recognition of Bupivacaine

Nanostructured bupivacaine-selective molecularly imprinted 3-aminophenylboronic acid-p-phenylenediamine co-polymer (MIP) films have been prepared on gold-coated quartz (Au/quartz) resonators by electrochemical synthesis under cyclic voltammetric conditions in a liquid crystalline (LC) medium (triton X-100/water). Films prepared in water and in the absence of template were used for control studies. Infrared spectroscopic studies demonstrated comparable chemical compositions for LC and control polymer films. SEM studies revealed that the topologies of the molecularly imprinted polymer films prepared in the LC medium (LC-MIP) exhibit discernible 40 nm thick nano-fiber structures, quite unlike the polymers prepared in the absence of the LC-phase. The sensitivity of the LC-MIP in a quartz crystal microbalance (QCM) sensor platform was 67.6 ± 4.9 Hz/mM under flow injection analysis (FIA) conditions, which was ≈250% higher than for the sensor prepared using the aqueous medium. Detection was possible at 100 nM (30 ng/mL), and discrimination of bupivacaine from closely related structural analogs was readily achieved as reflected in the corresponding stability constants of the MIP-analyte complexes. The facile fabrication and significant enhancement in sensor sensitivity together highlight the potential of this LC-based imprinting strategy for fabrication of polymeric materials with hierarchical architectures, in particular for use in surface-dependent application areas, e.g., biomaterials or sensing.

Biotin selective polymer nano-films

Background

The interaction between biotin and avidin is utilized in a wide range of assay and diagnostic systems. A robust material capable of binding biotin should offer scope in the development of reusable assay materials and biosensor recognition elements.

Results

Biotin-selective thin (3–5 nm) films have been fabricated on hexadecanethiol self assembled monolayer (SAM) coated Au/quartz resonators. The films were prepared based upon a molecular imprinting strategy where N,N'-methylenebisacrylamide and 2-acrylamido-2-methylpropanesulfonic acid were copolymerized and grafted to the SAM-coated surface in the presence of biotin methyl ester using photoinitiation with physisorbed benzophenone. The biotinyl moiety selectivity of the resonators efficiently differentiated biotinylated peptidic or carbohydrate structures from their native counterparts.

Conclusions

Molecularly imprinted ultra thin films can be used for the selective recognition of biotinylated structures in a quartz crystal microbalance sensing platform. These films are stable for periods of at least a month. This strategy should prove of interest for use in other sensing and assay systems.

Biotinyl moiety-selective polymer films with highly ordered macropores

Macroporous polymer films with long-range uniformity and biotinyl-moiety selective recognition sites have been developed. A hierarchical molecular imprinting strategy afforded significant enhancements in quartz crystal microbalance (QCM) sensitivities towards biotinylated compounds.

Molecularly imprinted polymer for recognition of 5-fluorouracil by RNA-type nucleobase pairing

A 6-aminopurine (adenine) derivative of bis(2,2'-bithienyl)methane, vis., 4-[2-(6-amino-9H-purin-9-yl)ethoxy]phenyl-4-[bis(2,2'-bithienyl)methane] or Ade-BTM, was designed and synthesized for recognition of 5-fluorouracil (FU), an antitumor chemotherapy agent, by RNA-type (nucleobase pairing)-driven molecular imprinting. The prepolymerization complex stoichiometry involved one FU molecule and two molecules of the Ade-BTM functional monomer. Molecular structure of this complex was thermodynamically optimized via density functional theory at the B3LYP/3-21G* level. The stability constant of the FU-Ade-BTM complex of 1:2 stoichiometry was K = 2.17(±0.07) × 10(7) M(-2), as determined by titration with quenching of fluorescence of the bis(2,2'-bithienyl)methane moiety of Ade-BTM by the FU titrant, in benzonitrile, at 352 nm excitation. Next, (5-fluorouracil)-templated molecularly imprinted polymer (MIP-FU) films were deposited on indium-tin oxide (ITO) or Au film-coated glass slides, Pt disk electrodes, or 10-MHz quartz crystal resonators by potentiodynamic electropolymerization from solution of FU, Ade-BTM, and tris([2,2'-bithiophen]-5-yl)methane (TTM) cross-linking monomer at FU:Ade-BTM:TTM = 1:2:3 mol ratio. Then UV-visible and Fourier transform infrared (FT-IR) spectra of the MIP-FU films were recorded to confirm the FU template presence in the MIP-FU film and its subsequent release by extraction with methanol from this film. For determination of the stability constant of the complex of the MIP cavity and FU, piezoelectric microgravimetry (PM) under both batch- and flow-injection analysis conditions was used. For sensing application, three different transduction platforms [differential pulse voltammetry (DPV), capacitive impedimetry (CI), and PM] were integrated with the MIP-FU recognition unit. The limit of detection (LOD) was 56 nM, 75 nM, and 0.26 mM, for these chemosensors, respectively, indicating suitability of the former two for FU determination in blood plasma or serum (~500 nM). Moreover, the CI chemosensor was appreciably more sensitive to FU than to their common interferences.

Effective separation of dopamine from bananas on 2-(3,4-dimethoxyphenyl)ethylamine imprinted polymer

A 2-(3,4-dimethoxyphenyl)ethylamine imprinted polymer (MIP(pt) ) was prepared via the precipitation polymerization together with a nonimprinted polymer (NIP). The morphology of particles was investigated by scanning electron microscopy and the specific surface areas were estimated by methylene blue adsorption (60.5 ± 3.5 and 36.9 ± 1.2 m(2)/g for MIP(pt) and NIP, respectively). The binding experiments were performed to determine the binding capacity of MIP(pt)/NIP particles toward dopamine. Next, the effects of solvents on loading, washing, and eluting steps were examined on solid-phase extraction (SPE). Methanol-water 85:15 v/v (loading step), methanol (washing step), and 0.04 M aqueous ammonium acetate-methanol 30:70 v/v (eluting step) were selected as the most effective systems. Described SPE protocol was successfully applied for separation of dopamine on 2-(3,4-dimethoxyphenyl)ethylamine imprinted particles. Finally, the molecularly imprinted polymer was used for determination of dopamine in spiked banana extract. The total recovery of dopamine from MIP(pt) was equal to 88.5 ± 4.6%, but from NIP was only 12.8 ± 2.3%. The developed material and method were demonstrated to be applicable for the separation of dopamine from bananas. The commercial sorbent C18 was not suitable to such application.

Electrochemically synthesized polymers in molecular imprinting for chemical sensing

This critical review describes a class of polymers prepared by electrochemical polymerization that employs the concept of molecular imprinting for chemical sensing. The principal focus is on both conducting and nonconducting polymers prepared by electropolymerization of electroactive functional monomers, such as pristine and derivatized pyrrole, aminophenylboronic acid, thiophene, porphyrin, aniline, phenylenediamine, phenol, and thiophenol. A critical evaluation of the literature on electrosynthesized molecularly imprinted polymers (MIPs) applied as recognition elements of chemical sensors is presented. The aim of this review is to highlight recent achievements in analytical applications of these MIPs, including present strategies of determination of different analytes as well as identification and solutions for problems encountered.