Direct electron transfer enhancement of covalently bound tyrosinase to glassy carbon via Woodward's reagent K

Electrochemical Biosensing of L-DOPA Using Tyrosinase Immobilized on Carboxymethyl Starch-Graft-Polyaniline@MWCNTs Nanocomposite

The electrochemical behavior of the immobilized tyrosinase (Tyrase) on a modified glassy carbon electrode with carboxymethyl starch-graft-polyaniline/multi-walled carbon nanotubes nanocomposite (CMS-g-PANI@MWCNTs) was investigated. The molecular properties of CMS-g-PANI@MWCNTs nanocomposite and its morphological characterization were examined by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and field emission scanning electron microscopy (FESEM). A simple drop-casting method was employed to immobilize Tyrase on the CMS-g-PANI@MWCNTs nanocomposite. In the cyclic voltammogram (CV), a pair of redox peaks were observed at the potentials of +0.25 to -0.1 V and E°' was equal to 0.1 V and the apparent rate constant of electron transfer (K_s) was calculated at 0.4 s^-1. Using differential pulse voltammetry (DPV), the sensitivity and selectivity of the biosensor were investigated. The biosensor exhibits linearity towards catechol and L-dopa in the concentration range of 5-100 and 10-300 μM with a sensitivity of 2.4 and 1.11 μA μΜ^-1 cm^-2 and limit of detection (LOD) 25 and 30 μM, respectively. The Michaelis-Menten constant (K_m) was calculated at 42 μΜ for catechol and 86 μΜ for L-dopa. After 28 working days, the biosensor provided good repeatability and selectivity, and maintained 67% of its stability. The existence of -COO^- and -OH groups in carboxymethyl starch, -NH₂ groups in polyaniline, and high surface-to-volume ratio and electrical conductivity of multi-walled carbon nanotubes in the CMS-g-PANI@MWCNTs nanocomposite cause good Tyrase immobilization on the surface of the electrode.

Sulfonated Starch-Graft-Polyaniline@Graphene Electrically Conductive Nanocomposite: Application for Tyrosinase Immobilization

The interaction of tyrosinase with sulfonated starch-graft-polyaniline@graphene (SSt-g-PANI@G) nanocomposite was investigated by electrochemical methods. The activity of the immobilized tyrosinase (Tyase) was proved by the electrochemical detection of three substrates (L-dopa, caffeic acid, and catechol). The SSt-g-PANI@G nanocomposite was characterized by Fourier-transform infrared spectra (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray analysis (EDX), and thermogravimetric analysis (TGA). To immobilize tyrosinase on the surface of the nanocomposite, a simple drop-casting technique was used. The presence of sulfuric acid and hydroxyl groups in SSt, amine groups in PANI, and high surface-to-volume ratio and electrical conductivity of graphene in the prepared nanocomposite led to good enzyme immobilization on the electrode surface. The modified electrode showed a suitable catalytic effect on the electrochemical redox agent, compared with the bare electrode. The peak current responses for three substrates were studied with a calibration curve derived using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). In addition, the fabricated SSt-g-PANI@G/Tyase/GCE showed a more suitable response to catechol, L-dopa, and caffeic acid substrates, respectively.

Simple and Cost-Effective Electrochemical Method for Norepinephrine Determination Based on Carbon Dots and Tyrosinase

Although neurotransmitters are present in human serum at the nM level, any dysfunction of the catecholamines concentration may lead to numerous serious health problems. Due to this fact, rapid and sensitive catecholamines detection is extremely important in modern medicine. However, there is no device that would measure the concentration of these compounds in body fluids. The main goal of the present study is to design a simple as possible, cost-effective new biosensor-based system for the detection of neurotransmitters, using nontoxic reagents. The miniature Au-E biosensor was designed and constructed through the immobilization of tyrosinase on an electroactive layer of cysteamine and carbon nanoparticles covering the gold electrode. This sensing arrangement utilized the catalytic oxidation of norepinephrine (NE) to NE quinone, measured with voltammetric techniques: cyclic voltammetry and differential pulse voltammetry. The prepared bio-system exhibited good parameters: a broad linear range (1–200 μM), limit of detection equal to 196 nM, limit of quantification equal to 312 nM, and high selectivity and sensitivity. It is noteworthy that described method was successfully applied for NE determination in real samples.

The Investigation of Electrochemistry Behaviors of Tyrosinase Based on Directly-Electrodeposited Grapheneon Choline-Gold Nanoparticles

A novel catechol (CA) biosensor was developed by embedding tyrosinase (Tyr) onto in situ electrochemical reduction graphene (EGR) on choline-functionalized gold nanoparticle (AuNPs-Ch) film. The results of UV-Vis spectra indicated that Tyr retained its original structure in the film, and an electrochemical investigation of the biosensor showed a pair of well-defined, quasi-reversible redox peaks with E_pa = -0.0744 V and E_pc = -0.114 V (vs. SCE) in 0.1 M, pH 7.0 sodium phosphate-buffered saline at a scan rate of 100 mV/s. The transfer rate constant k_s is 0.66 s^-1. The Tyr-EGR/AuNPs-Ch showed a good electrochemical catalytic response for the reduction of CA, with the linear range from 0.2 to 270 μM and a detection limit of 0.1 μM (S/N = 3). The apparent Michaelis-Menten constant was estimated to be 109 μM.

Mesoporous carbon-containing voltammetric biosensor for determination of tyramine in food products

A voltammetric biosensor based on tyrosinase (TYR) was developed for determination of tyramine. Carbon material (multi-walled carbon nanotubes or mesoporous carbon CMK-3-type), polycationic polymer-i.e., poly(diallyldimethylammonium chloride) (PDDA), and Nafion were incorporated into titania dioxide sol (TiO2) to create an immobilization matrix. The features of the formed matrix were studied by scanning electron microscopy (SEM) and cyclic voltammetry (CV). The analytical performance of the developed biosensor was evaluated with respect to linear range, sensitivity, limit of detection, long-term stability, repeatability, and reproducibility. The biosensor exhibited electrocatalytic activity toward tyramine oxidation within a linear range from 6 to 130 μM, high sensitivity of 486 μA mM(-1) cm(-2), and limit of detection of 1.5 μM. The apparent Michaelis-Menten constant was calculated to be 66.0 μM indicating a high biological affinity of the developed biosensor for tyramine. Furthermore, its usefulness in determination of tyramine in food product samples was also verified. Graphical abstract Different food samples were analyzed to determine tyramine using biosensor based on tyrosinase.

Tyrosinase-based biosensor for determination of bisphenol A in a flow-batch system

A tyrosinase-based amperometric biosensor is proposed for determination of bisphenol A (BPA) in a flow-batch monosegmented sequential injection system. The enzyme was entrapped in a sol-gel TiO2 matrix modified with multi-walled carbon nanotubes (MWCNTs), polycationic polymer poly(diallyldimethylammonium chloride), (PDDA) and Nafion. Morphology of TYR/TiO2/MWCNTs/PDDA/Nafion matrix composite was studied via scanning electron microscopy (SEM). Electrochemical behavior of the developed biosensor towards bisphenol A was examined and analytical characteristics were assessed with respect to linear range, biosensor sensitivity, limit of detection, long term stability, repeatability and reproducibility. Linear range of biosensor response was found between 0.28 and 45.05 µM with high sensitivity of 3263 µA mM(-1) cm(-2) and detection limit 0.066 µM. The approach was successfully employed for determination of BPA in natural samples.