Bioelectrocatalytic reduction of oxygen at gold nanoparticles modified with laccase

Trametes versicolor laccase activity modulated by the interaction with gold nanoparticles

In this study, the impact of gold nanoparticles (AuNPs) on the structure and activity of laccase from Trametes versicolor (Lc) was described. Fluorescence experiments revealed that AuNPs efficiently quench Lc's tryptophan fluorescence by a static and dynamic process. By using differential scanning microcalorimetry and circular dichroism spectroscopy, it was determined how the concentration of nanoparticles and the composition of the medium affected the secondary structure of Lc. The data revealed that upon binding with AuNPs, conformational changes take place mainly in presence of high amounts of nanoparticles. The complex kinetic analysis unveiled the Lc activity enhancement at low concentrations of AuNPs as opposed to the concentrated regime, where it can be reduced by up to 55%. The Michaelis-Menten tests highlighted that the activity of the biocatalyst is closely related to the concentration of AuNPs, while the Selwyn analysis demonstrated that even in a concentrated regime of Lc it is not deactivated regardless of the amount of AuNPs added. The thermal parameters improved by twofold in the presence of low AuNPs concentration, whereas the activation energy increased with AuNPs content, implying that not all collisions are beneficial to the enzyme structure. The effect of AuNPs on the decomposition of a recalcitrant dye (naphthol green B, NG) by Lc was also evaluated, and the Michaelis-Menten model revealed that only the high AuNPs content influenced negatively the Lc activity. The isothermal titration calorimetry revealed that hydrogen bonds are the main intermolecular forces between Lc and AuNPs, while electrostatic interactions are responsible for NG adsorption to AuNPs. The results of the docking analysis show the binding of NG near the copper T1 site of Lc with hydrogen bonds, electrostatic and hydrophobic interactions. The findings of this work provide important knowledge for laccase-based bio-nanoconjugates and their use in the field of environmental remediation.

Electrochemical Sensing of Glucose Using Glucose Oxidase/PEDOT:4-Sulfocalix [4]arene/MXene Composite Modified Electrode

Glucose is one of the most important monosaccharides found in the food, as a part of more complex structures, which is a primary energy source for the brain and body. Thus, the monitoring of glucose concentration is more important in food and biological samples in order to maintain a healthy lifestyle. Herein, an electrochemical glucose biosensor was fabricated by immobilization of glucose oxidase (GOX) onto poly(3,4-ethylenedioxythiophene):4-sulfocalix [4]arene (PEDOT:SCX)/MXene modified electrode. For this purpose, firstly, PEDOT was synthesized in the presence of SCX (counterion) by the chemical oxidative method. Secondly, MXene (a 2D layered material) was synthesized by using a high-temperature furnace under a nitrogen atmosphere. After that, PEDOT:SCX/MXene (1:1) dispersion was prepared by ultrasonication which was later utilized to prepare PEDOT:SCX/MXene hybrid film. A successful formation of PEDOT:SCX/MXene film was confirmed by HR-SEM, Fourier transform infrared (FT-IR), and Raman spectroscopies. Due to the biocompatibility nature, successful immobilization of GOX was carried out onto chitosan modified PEDOT:SCX/MXene/GCE. Moreover, the electrochemical properties of PEDOT:SCX/MXene/GOX/GCE was studied through cyclic voltammetry and amperometry methods. Interestingly, a stable redox peak of FAD-GOX was observed at a formal potential of –0.435 V on PEDOT:SCX/MXene/GOX/GCE which indicated a direct electron transfer between the enzyme and the electrode surface. PEDOT:SCX/MXene/GOX/GCE also exhibited a linear response against glucose concentrations in the linear range from 0.5 to 8 mM. The effect of pH, sensors reproducibility, and repeatability of the PEDOT:SCX/MXene/GOX/GCE sensor were studied. Finally, this new biosensor was successfully applied to detect glucose in commercial fruit juice sample with satisfactory recovery.

A review: Evolution of enzymatic biofuel cells

Ever-growing demands for energy, the unsustainability of fossil fuel due to its scarcity and massive impact on global economies and the environment, have encouraged the research on alternative power sources to work upon for the governments, companies, and scientists across the world. Enzymatic biofuel cells (eBFCs) is one category of fuel cell that can harvest energy from biological moieties and has the future to be used as an alternative source of energy. The aim of this review is to summarize the background and state-of-the-art in the field of eBFCs. This review article will be very beneficial for a wide audience including students and new researchers in the field. A part of the paper summarized the challenges in the preparation of anode and cathode and the involvement of nanomaterials and conducting polymers to construct the effective bioelectrodes. It will provide an insight for the researchers working in this challenging field. Furthermore, various applications of eBFCs in implantable power devices, tiny electronic gadgets, and self powered biosensors are reported. This review article explains the development in the area of eBFCs for several years from its origin to growth systematically. It reveals the strategies that have been taken for the improvements required for the better electrochemical performance and operational stability of eBFCs. It also mentions the challenges in this field that will require proper attention so that the eBFCs can be utilized commercially in the future. The review article is written and structurized in a way so that it can provide a decent background of eBFCs to its reader. It will definitely help in enhancing the interest of reader in eBFCs.

Nanoparticle-Based Electrodes with High Charge Transfer Efficiency through Ligand Exchange Layer-by-Layer Assembly

Organic-ligand-based solution processes of metal and transition metal oxide (TMO) nanoparticles (NPs) have been widely studied for the preparation of electrode materials with desired electrical and electrochemical properties for various energy devices. However, the ligands adsorbed on NPs have a significant effect on the intrinsic properties of materials, thus influencing the performance of bulk electrodes assembled by NPs for energy devices. To resolve these critical drawbacks, numerous approaches have focused on developing unique surface chemistry that can exchange bulky ligands with small ligands or remove bulky ligands from NPs after NP deposition. In particular, recent studies have reported that the ligand-exchange-induced layer-by-layer (LE-LbL) assembly of NPs enables controlled assembly of NPs with the desired interparticle distance, and interfaces, dramatically improving the electrical/electrochemical performance of electrodes. This emerging approach also demonstrates that efficient surface ligand engineering can exploit the unique electrochemical properties of individual NPs and maximize the electrochemical performance of the resultant NP-assembled electrodes through improved charge transfer efficiency. This report focuses on how LE-LbL assembly can be effectively applied to NP-based energy storage/conversion electrodes. First, the basic principles of the LE-LbL approach are introduced and then recent progress on NP-based energy electrodes prepared via the LE-LbL approach is reviewed.

High catalytic performance of laccase wired to naphthylated multiwall carbon nanotubes

The direct electrical connection of laccase on the electrode surface is a key feature in the design of efficient and stable biocathodes. However, laccase can perform a direct electron transfer only when it is in the preferred orientation toward the electrode. Here we report the investigation of the orientation of laccase from white rot fungus on multi-walled carbon nanotube surface modified with a naphthalene group. Naphthylated multi wall carbon nanotubes were synthesized and the kinetics of laccase from white rot fungus adsorption and its direct electro-catalytic activity toward oxygen reduction was investigated by QCM and electrochemical techniques. Compared to pristine multi-walled carbon nanotubes laccase shows a high affinity to be adsorbed onto the surface of naphthylated carbon nanotubes at a very fast rate. The subsequent wiring to the naphthylated multi-walled carbon nanotubes is accompanied by a reorientation and arrangement of adsorbed laccase to create a composite biocathode that exhibits a high-performance for oxygen reduction by direct electron transfer with maximum current densities of 3 mA cm^-2.

Direct electron transfer-type bioelectrocatalysis of FAD-dependent glucose dehydrogenase using porous gold electrodes and enzymatically implanted platinum nanoclusters

The direct electron transfer (DET)-type bioelectrocatalysis of flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase (GDH) from Aspergillus terreus (AtGDH) was carried out using porous gold (Au) electrodes and enzymatically implanted platinum nanoclusters (PtNCs). The porous Au electrodes were prepared by anodization of planar Au electrodes in a phosphate buffer containing glucose as a reductant. Moreover, PtNCs were generated into AtGDH by an enzymatic reduction of hexachloroplatinate (IV) ion. The modification was confirmed by native polyacrylamide gel electrophoresis and sodium dodecyl sulfate polyacrylamide gel electrophoresis analyses. The AtGDH-adsorbed porous Au electrode showed a DET-type bioelectrocatalytic wave both in the presence and absence of PtNCs; however, the current density with PtNCs (~1 mA cm^-2 at 0 V vs. Ag|AgCl|sat. KCl) was considerably higher than that without PtNCs. The kinetic and thermodynamic analysis of the steady-state catalytic wave indicated that inner PtNCs shortened the distance between the catalytic center of AtGDH (=FAD) and the conductive material, and improved the heterogeneous electron transfer kinetics between them.

Tackling the Challenges of Enzymatic (Bio)Fuel Cells

The ever-increasing demands for clean and sustainable energy sources combined with rapid advances in biointegrated portable or implantable electronic devices have stimulated intensive research activities in enzymatic (bio)fuel cells (EFCs). The use of renewable biocatalysts, the utilization of abundant green, safe, and high energy density fuels, together with the capability of working at modest and biocompatible conditions make EFCs promising as next generation alternative power sources. However, the main challenges (low energy density, relatively low power density, poor operational stability, and limited voltage output) hinder future applications of EFCs. This review aims at exploring the underlying mechanism of EFCs and providing possible practical strategies, methodologies and insights to tackle these issues. First, this review summarizes approaches in achieving high energy densities in EFCs, particularly, employing enzyme cascades for the deep/complete oxidation of fuels. Second, strategies for increasing power densities in EFCs, including increasing enzyme activities, facilitating electron transfers, employing nanomaterials, and designing more efficient enzyme-electrode interfaces, are described. The potential of EFCs/(super)capacitor combination is discussed. Third, the review evaluates a range of strategies for improving the stability of EFCs, including the use of different enzyme immobilization approaches, tuning enzyme properties, designing protective matrixes, and using microbial surface displaying enzymes. Fourth, approaches for the improvement of the cell voltage of EFCs are highlighted. Finally, future developments and a prospective on EFCs are envisioned.

Impact of molecular linker size on physicochemical properties of assembled gold nanoparticle mono-/multi-layers and their applicability for functional binding of biomolecules

In this work the impact of molecular inter-linker size on gold nanoparticle (AuNP) mono-/multilayer structural properties, density and homogeneity has been investigated. These characteristics are of great importance for functional binding of biomolecules. Positively charged high or low molecular weight inter-linkers, poly-L-lysine (PLL) or N-(6-mercapto)hexylpyridinium (MHP), were used to attach negatively charged AuNPs on a planar gold surface as well as to further interlink into a multilayer structure via layer-by-layer deposition. The inter-particle interaction within the assembled AuNP films was adjusted by the ionic strength in the AuNPs dispersions. The AuNP layer density and structural/viscoelastic properties were evaluated by the quartz crystal microbalance with dissipation (QCM-D) technique. The validity of the commercial Voigt model, specifically developed for quantitative QCM-D data analysis of homogeneous viscoelastic films, was evaluated by a model independent analysis when comparing the assembled AuNP films with a homogeneous layer of a mucin from bovine submaxillary glands. Both AuNP mono- and multilayers, attached/interlinked via long flexible PLL molecules assembled to denser and more soft/viscous structures compared to those interlinked by short MHP compounds. Thus, PLL-interlinked AuNP mono-/multilayer structures were further investigated as a platform for laccase enzyme functional adsorption via qualitative assessment of bioelectrochemical characteristics of the enzyme.

Reactivation of standard [NiFe]-hydrogenase and bioelectrochemical catalysis of proton reduction and hydrogen oxidation in a mediated-electron-transfer system

Standard [NiFe]-hydrogenase from Desulfovibrio vulgaris Miyazaki F (DvMF-H₂ase) catalyzes the uptake and production of hydrogen (H₂) and is a promising biocatalyst for future energy devices. However, DvMF-H₂ase experiences oxidative inactivation under oxidative stress to generate Ni-A and Ni-B states. It takes a long time to reactivate the Ni-A state by chemical reduction, whereas the Ni-B state is quickly reactivated under reducing conditions. Oxidative inhibition limits the application of DvMF-H₂ase in practical devices. In this research, we constructed a mediated-electron-transfer system by co-immobilizing DvMF-H₂ase and a viologen redox polymer (VP) on electrodes. The system can avoid oxidative inactivation into the Ni-B state at high electrode potentials and rapidly reactivate the Ni-A state by electrochemical reduction of VP. H₂ oxidation and H⁺ reduction were realized by adjusting the pH from a thermodynamic viewpoint. Using carbon felt as a working-electrode material, high current densities-up to (200 ± 70) and -(100 ± 9) mA cm^-3 for the H₂-oxidation and H⁺-reduction reactions, respectively-were attained.

Ascorbic acid sensor using a PVA/laccase-Au-NPs/Pt electrode

A surface-modified electrode, PVA/laccase-Au-NPs/Pt, was prepared to sense ascorbic acid (H₂A) in this study.

Design of Laccase-Metal Organic Framework-Based Bioelectrodes for Biocatalytic Oxygen Reduction Reaction

Laccase in combination with 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as a mediator is a well-known bioelectrocatalyst for the 4-electron oxygen reduction reactions (ORR). The present work deals with the first exploitation of mesoporous iron(III) trimesate-based metal organic frameworks (MOF) MIL-100(Fe) (MIL stands for materials from Institut Lavoisier) as a new and efficient immobilization matrix of laccase for the building up of biocathodes for ORR. First, the immobilization of ABTS in the pores of the MOF was studied by combining micro-Raman spectroscopy, X-ray powder diffraction (XRPD), and N2 porosimetry. The ABTS-MIL-100(Fe)-based modified electrode presents excellent properties in terms of charge transfer kinetics and ionic conductivity as well as a very stable and reproducible electrochemical response, showing that MIL-100(Fe) provides a suitable and stabilizing microenvironment for electroactive ABTS molecules. In a second step, laccase was further immobilized on the MIL-100(Fe)-ABTS matrix. The Lac-ABTS-MIL-100(Fe)-CIE bioelectrode presents a high electrocatalytic current density of oxygen reduction and a reproducible electrochemical response characterized by a high stability over a long period of time (3 weeks). These results constitute a significant advance in the field of laccase-based bioelectrocatalysts for ORR. According to our work, it appears that the high catalytic efficiency of Lac-ABTS-MIL-100(Fe) for ORR may result from a synergy of chemical and catalytic properties of MIL-100(Fe) and laccase.